DIY kitchen door repair

In detail: do-it-yourself kitchen door repair from a real master for the site my.housecope.com.

Look with sadness at a sagging door with a sticky lock and peeling varnish? Are you planning to replace it as soon as possible? Do not hurry! The easiest way to make such a radical decision. But why not try to deal with the problem? Most door defects are successfully "treated" at home, without the help of professionals. Do-it-yourself door repair is a real opportunity to save a decent amount of money and once again make sure that a born master lives in each of us.

When do doors need repairs?

While the doors look presentable, and there are no difficulties with their operation, the absolute majority does not even think about the need for regular maintenance of the structure. But from time to time, even the most disgusting and high-tech samples need inspection and preventive manipulations - cleaning the surface, adjusting and lubricating the hinges, coating with special compounds. If you don't, one day you will find that the doors:

sagged and scratched the floor;
creak;
hang out on hinges;
do not close well, entering the box too tight;
cracked, cracks appeared in them;
etc.

Problems with the box (staggering), decorative outer finishing of the canvas (veneer peeled off, paint peeling) are also not excluded.

Worth knowing! Malfunctions or damage to the appearance of a structure are not always caused by improper operation. Often, the "root of evil" lurks in the quality of the door itself, in violation of the technology of its production.

Strengthening the door frame

Video (click to play).

A box that does not hold well in the opening can be strengthened using such a simple algorithm of actions:

Remove the platbands and door leaf.
Align the box.
Fix the box in the correct position.
Drill two or three holes in the hinge and lock posts (be sure to go deep into the wall).
Drive wood (hardwood) pins or steel pins that have been pre-coated with epoxy into the holes.
Hang the canvas again, attach the platbands.

Note! It is necessary to adjust the position of the box "reckoning" with the canvas - the convenience of opening / closing the door should not be affected.

Troubleshooting hinges

If the door touches the threshold or the floor, closes poorly, dangles, then it may be necessary to replace, adjust or re-hang the hinges.

First of all, check how firmly the top hinge is held: tighten the screws if necessary.

A slightly sagging door can be "put back" using a metal washer or a wire ring put on the hinge pin (this advice is relevant for structures equipped with removable hinges).

None of the tricks work? You can try deepening the recess under the hinge plate (in the strapping bar).

When working with hinges, it also happens that the screws turn and it is impossible to tighten them - especially if you are repairing an old door with your own hands. What to do in this case? Several options are possible here:

Replace the fastener with a longer size.
Seal the screw holes with matches.
Rearrange the hinges slightly higher or lower.

Adjusting the web geometry

Sometimes even a cursory examination helps to understand that door faults are not “hidden” in the box, and not even in the hinges, but in the canvas itself. More precisely, in its geometry.

Moisture can swell or dry out. And also, after several stains or varnishes, an overly thick layer of protective agents may form on it. What to do?

Close the door tightly and evaluate the dimensions of the gaps. If they are too small or missing, remove the fabric from the hinges and sew the harness.

Be careful! Before planing, it will not be superfluous to make sure once again that the matter is definitely not in a deformed box.

Large gaps are not a problem

A door made of undried wood will inevitably dry out during operation. And this can lead to a lot of problems. Large loops between the canvas and the box, the latch tongue that does not reach the striker plate, in general, the sagging structure - you must agree, there is little pleasant. How to proceed?

Rearrange the hinges to pull the door up.
Attach a strip of the required dimensions to the bottom end of the blade, and fit it flush.
Eliminate the side gaps using a strip screwed to the hinge end of the door.
Fill the cracks between the harness and the planks, clean them.
Paint the planks.

Strengthening panels

A cracked door isn't just about gaps. These are also panels that do not fit well in the grooves of the strapping.

In this situation, it is recommended to re-glue the strapping bars. To do this, the door is removed from its hinges, disassembled, thoroughly cleaned of old glue and dirt. Then the bars are connected (glued), the panels are inserted into place and the transformed structure is placed in the clamping device.

Cracks in the door

Do-it-yourself repair of interior doors often involves sealing cracks. You have to tinker - but the result is worth it.

Place the door on the table / trestle.
Remove the obvious coating from the surface - you can use sandpaper, special liquid agents, etc.
Sand the canvas with a fine sandpaper.
Seal small cracks and scratches with wood filler / epoxy glue and sawdust mixture.
Sand the dried surface again.
“Mask” large gaps (including through ones) with wooden inserts greased with glue.
Spatulate visible irregularities.
Prime the entire door surface.
Cover the canvas with varnish or paint. If it is not an interior door, but the front door, the varnish should be applied in at least two layers.

Metal doors are a more reliable structure than wooden ones, however, it is sometimes not so easy to repair it on your own.

The door is twisted

It is impossible not to notice the skew of the door - it begins to scratch the threshold, ceases to close well, its sound and heat insulation properties deteriorate sharply. There may be several reasons for this phenomenon.

The first of them is too much weight of the metal sheet. If the door is made of thick multilayer steel, even the highest quality hinges will one day fail. Do-it-yourself front door repair in this case is extremely difficult. You can try your luck by cutting off old loops and replacing them with new ones.

The second is the natural wear and tear of the hinges. If they are "screwed on" and not welded, then it is not difficult to rectify the situation. The main thing is to find high-quality fittings with a suitable "design" among the assortment of shops.

The third is the skew of the door frame. Eliminated by driving wedges under the base of the structure.

The door is rusted

Especially "gets" its lower part.

To put the rusty metal doors in order, you will have to make a number of rather laborious manipulations.

Prepare the structure for repair - dismantle seals, fittings, etc.
Use a metal brush to remove any rust and any peeling paint.
Sand the surface.
Degrease doors with solvent.
Putty the damaged areas (it is recommended to use a product for cars).
Sand the surface again, aiming for perfect evenness.
Prime the door with a spray primer.
Apply the first coat of paint.
Sand (if necessary) the resulting smudges.
Apply a second coat of paint.
Install the hardware and seal on the dry, repaired door.

Plastic doors are considered exemplary aesthetic and reliable. But with a long service life, some "failures" in their work are not excluded. Therefore, it is still worth knowing how to repair plastic doors with your own hands.

Door handle malfunction

This breakdown is one of the most typical for plastic construction. To replace the hardware, turn the decorative plate at the base of the handle ninety degrees and unscrew the two screws.

If the handle is intact, but it is turned with great difficulty, it is quite possible that the grease has simply dried out. To save yourself from torment, purchase a lubricant and treat all the moving parts of the mechanism with it.

Sagging door

To fix this problem, adjust the position of the door with a hex key. It is inserted into the lower loop and turned clockwise - thus, the canvas rises.

Door closers are mechanisms that are extremely popular in recent years. They are responsible for the quiet and smooth closing of the structure. The devices are installed, contrary to popular belief, not only on massive and heavy office doors or doors to the entrance, but also on the entrance and interior doors.

What malfunctions can overtake "the faithful assistant of silence and comfort"? Can you handle them yourself?

Leakage of working fluid

This breakdown is the most common among door closers. The working fluid begins to flow out through the unpressurized oil seals. Most often, this phenomenon is observed in the winter. It leads to a loss of the door closer smoothness of closing - the device turns into the most ordinary spring. Since it is not possible to disassemble the closer, in such a situation, the replacement of the mechanism is shown.

Rod (lever) breakage

The bar is one of the few door closer parts that can be repaired by hand in case of breakdown. What usually happens to her?

bending;
seizure in joints;
break;
damage to the mounting place.

Minor damage to the boom can be repaired by welding. In the event of a serious malfunction, a reasonable solution is to replace the part. It will cost less than replacing the entire mechanism.

If you have a working rod that is suitable in terms of parameters from another closer, you can use it.

Subtleties of adjustment

Long-term operation of the closer definitely affects the quality of its work. Fortunately, most minor defects can be eliminated with the help of competent adjustment.

if the door closes too quickly or, on the contrary, unusually slowly, turn the control valve clockwise / counterclockwise;
the closing speed is controlled by the second control valve;
the tension force of the spring is adjusted with a nut;
to use the closing delay function, tighten the latch tighter with the door open at a right angle.

As you can see, it is not at all difficult to eliminate many door faults. It is more difficult to make a decision about the appropriateness of such actions. If the condition of the doors is too critical or expensive equipment is required for repair, which you do not have in stock, it will be easier and more correct to acquire a new interior element.

Kitchen cabinet door, ripped out fasteners with meat. Can it be repaired?

Another photo of this door! Of course you can! First, glue all the chips of chipboard with PVA glue and press this case well. Then tighten with the same glue all the screws that hold the door hinges, if the screws fly into the old hole, then mix some addition into PVA glue, you can use wood chips. Good luck!

You can repair it. There are two ways.

1 way. If the holes are large, then buy plastic dowels. We drill holes and insert dowels. The dowels are likely to be longer. We cut them to size with a knife. We hang the door on self-tapping screws.

Method 2.If it is broken at all, then we dilute the epoxy resin. mix it with coarse sawdust and pour the mixture onto the damaged surface. After the resin has hardened, mark the holes for the door fasteners. We drill first with a thin drill, and then we drill it to the size of the self-tapping screw. Dowels are no longer needed. It should dry for a day. Otherwise it will crack and fall out. We fix the door. Done. Good luck.

All the furniture (like vodka)) is now made of sawdust. In this case, the screws are probably torn out of the nests, if the seats of the door canopies are intact, then the nests from the screws, carefully, can be restored with sawdust mixed with glue, when hardened, with a drill make holes and reinforce the awnings again. Or, in a furniture workshop, order a board for

new door (picking up the same material) and hang it on the cabinet yourself.

The most reliable way is, of course, to buy a special cutter with a diameter of 30 mm for furniture hinges for a drill. Its depth corresponds to the depth of the hinge. Then make new grooves in the door for the furniture hinge with a cutter. Then screw the hinges to the door with 15mm self-tapping screws, and the second part of the hinges to the side wall. But if you don't want to do all this, there is another reliable and proven way.

Carefully separate all parts from each other (hinges, door, side panel) Thin the epoxy. And you put it all together. Just first make up the door-hinge assembly and let the resin harden, and then screw the door into the same old holes with self-tapping screws, only with resin and leave to harden. It is advisable to fix the door with tape until the resin in the hinges on the side is petrified. This method has been proven since Soviet times.

Any wooden doors can be repaired with your own hands, the main thing is to competently approach this process and get acquainted with the advice of professionals. You can repair doors from materials such as MDF, fiberboard and particleboard. This will require a lot of manipulations, but simple enough, and if you follow the recommendations of experienced craftsmen, it is possible to avoid serious consequences and restore the aesthetics of any wooden door with your own hands.

After some time after use, any wood covering may lose its proper appearance. For example, you may need to patch up a hole in the interior door, which is quite possible to do on your own and even without the help of a master. For this process, you will need to prepare a number of items.

In order to close a hole in a fiberboard door, you must first prepare all the necessary materials for repair

Namely, it is important to have:

Paper, moreover, ordinary and emery, in which the grain size should be more than 150;
Polyurethane foam;
Epoxy or polyester resin, which can be purchased at any automotive store;
Putty specially designed for wood flooring;
Primers for wood;
A special two-component paint and varnish composition and a brush.

First you need to remove the hole. In other words, a hole is initially prepared, which is cut out with a special construction knife. The preparation of such a hole makes it possible to simplify the process of sealing the opening during subsequent work. Next, inside the door leaf, you need to make stuffing of paper or newspapers. Absolutely any literature will do, but only with durable sheets of paper.

This stage allows you to reduce the consumption of polyurethane foam, which will fill the hole. After the foam has dried, you need to cut off its excess in order to level it with the surface of the door leaf. Due to the fact that the foam has a very porous structure, it cannot be called a durable web, and therefore requires the coating of the foam layer with resin. As soon as it saturates the foam at the cut and hardens, then the space of the hole can be considered sealed.The restoration and, in particular, the application of the resin must be carried out with special rubber gloves to avoid getting the compound on the hands.

If the resin gets on the skin, then you need to remove it as quickly as possible with a solvent.

Once you are satisfied that the resin is really cured, you can apply a putty designed specifically for wood. Once it is dry, the surface is sanded with sandpaper. There must be a priming. Each subsequent stage is done only after the previous applied layer has completely dried, which will allow the door to be reconstructed quickly, simply and without consequences. Finally, the door is covered with a pre-selected composition of paint and varnish material.

Many men prefer to repair wooden doors and eliminate defects on the surface of a chipboard cabinet door with their own hands. Thus, you can save a lot of money and restore the former aesthetics of the product, even if he punched it with his fist and a huge dent needs to be removed. How to restore the original beauty of the cabinet?

To repair a chipboard door, you need to prepare glue, clamp and other materials in advance

You need to prepare:

PVA glue;
Clamp;
A medical needle or syringe.

Chipboard, even with the slightest impact during operation, can deform, since over time the canvas begins to accumulate moisture, and not only aesthetics are lost, but also strength. Defects such as cracks and crevices can quite naturally form.

The restoration begins with the removal of all dirt from the surface of the cabinet, after the coating has dried, you need to fill the syringe with an adhesive and fill the cracks with it.

Simultaneously with filling, a clamp must be installed in order to tightly connect the parted edges. If the glue flows out, then immediate removal is required to prevent it from hardening, which is not so easy to cope with. The clamps are removed only a day after work, and then you can carry out filling, cleaning and coating with paint or varnish.

It is very easy to make a covering of an entrance or interior door, for example, veneered or completely wooden, but initially it is worthwhile to figure out how the defects arose and for what reason. Mechanical damage includes those defects that are formed from direct impact on the door leaf. Thus, a scratch, dent, hole or breach may occur.

The main cause of door breakage may be its incorrect installation.

If installed incorrectly, problems such as:

Web skew;
Incomplete adjoining of the door to the door frame;
Too much friction.

Wood and panels made from it are highly hygroscopic, due to which they have the ability to absorb moisture. If production was disrupted during the manufacture, then this can cause serious consequences. With high humidity in the room or if the building is not heated, the structure begins to swell and deform.

The door can dry out over time, resulting in the use of raw lumber in the manufacture of such products.

It is possible to completely unstick the canvas if it was poorly assembled at the factory or completely manually at home. To restore a veneer or MDF door from the flaws made due to improper installation, you should pay attention to a number of the recommendations below.

With a poor door opening, friction increases, and therefore it is necessary to remove the excess part of the canvas from the edge using a planer, after which sanding, painting and varnishing is required. Ideally, the gap between the frame and the door leaf should be 2 mm. If, when closing, the door begins to spring, that it is possible that it rests against a quarter of the box. In this case, you need to trim either the door leaf or the frame itself.In addition, the problem may lie in the illiterate installation of the hinges. The door may sag, and to restore it to its normal appearance, you need to put new washers on the shaft of each hinge.

It is much easier and more convenient to disguise or, in other words, decorate a hole in the door, especially for those who do not have special skills in such a case. Depending on what style is present in the interior, you can close the hole in the door leaf in a variety of ways.

You can fill a hole in the interior door in various ways, which you can choose at your discretion

Place the poster on the surface of the door; it is perfect for a child's room or a room with a lax style. Today, a huge number of accessories are on sale, among which you can choose the most optimal and original decor option. So you can not only hide the defect, but also transform the room.
The glued mirror will look very interesting. Self-adhesive mirrors have literally become the peak of popularity, since they perform exactly the same function as an ordinary mirror, however, they do not weigh down the door leaf, and you can purchase a product of any shape, size and even cost.
One of the cheap and simple options is gluing the most common self-adhesive film, the choice of which in stores with building and finishing materials is simply huge.
It used to be fashionable to hang doors with cloth or collage with photographs. Such decorative design will not only eliminate the problem, but also allow you to show imagination to decorate your home with your own hands.

The design of the door leaf is very simple in its structure, however, the internal configuration depends on which method you can choose for its restoration. Naturally, if the door is made of a solid sheet of wood, then there will be much less problems with it, since holes or dents are unlikely to form.

With cheaper canvases, things are a little different. According to the recommendations presented, we can conclude that it is not at all difficult to restore their proper appearance.After moving to the one-room "Khrushchev" building, we decided to make repairs, which included replacing the old kitchen door. Image - DIY kitchen door repair

The interior door is made of solid wood, and it was a pity to throw it out, although it looked awful. Then it was decided to carry out the restoration of the old door with his own hands and thereby save on buying a new one.

This is how our door initially looked. As you can see, her condition is rather deplorable and is not at all aesthetic appearance.

The door had old handles, reminiscent of a hospital room; many smudges of paint, the layers of which could not be counted; protruding platbands that just disfigured the door, and, of course, a completely uneven surface.

This door has stood since the time of construction, namely since 1968.

First, we unscrewed the old knobs. Then they removed the door from its hinges. To level the surface of the door at home, we decided to use a plane.

The planer removed the old paint layer well enough in the protruding places. The protruding edges of the platbands were removed with a plane and the end surface was processed so that the corners of the door were even.

We then used coarse sandpaper to sand the surface of the door leaf.

The result is a rather impressive amount of debris and wood shavings.

Then we returned the door to its place.

Note! You need to work with the plane carefully so that you do not get too deep grooves.

Read the continuation on the next page by clicking its number below.

Repairing kitchen furniture is a troublesome and time-consuming process. It can be done by hand, which will help to significantly reduce financial costs.Naturally, any furniture, regardless of its quality and manufacturer, eventually loses its external gloss, and some of its parts fail, causing a lot of problems.

To update the design of the kitchen, it is not necessary to buy new furniture, you can restore and repair the existing one.

If you are planning to repair kitchen furniture on your own, then you should mentally prepare for the painstaking and lengthy work associated with assembling and disassembling the headset, replacing various parts, grinding, painting, etc. that is, you will have to come to terms with the fact that the kitchen is then the period will not be able to function normally.

Kitchen sets are most often made of chipboard, sometimes wood, with elements of metal, glass and plastic. During operation, natural aging of the material occurs, mechanical damage of a different nature occurs, various spots and stains appear. First of all, the appearance of the facade suffers: the color fades, yellowness appears, cracks, scratches and potholes appear, as a result of which the furniture loses its attractiveness. To eliminate these negative phenomena, the restoration of the kitchen set is necessary.

Diagram of a floor-standing kitchen cabinet.

Many problems arise when various structural elements break. Most often, the hostess is annoyed by faulty cabinet doors: flap distortions, self-opening or difficulties in opening them, as well as problems with drawers. In short, if not alteration, then at least minor repairs are necessary.

Repair of kitchen sets most often includes the following work:

repair of drawers and shelves;
strengthening the cabinet body;
replacement of hinges and door repair;
restoration or replacement of countertops;
restoration of the geometry of damaged elements;
strengthening of hinged hinges;
restoration and renovation of the facade;
replacement of accessories.

Standard sizes of kitchen sets.

Tools and materials are required for work:

hammer and nails;
screwdriver, self-tapping screws;
putty knife;
sandpaper;
brushes;
joiner's glue.

The most common is the repair of the cabinet door, which is forced by such defects as skewed sash, change in the geometry of the sash, spontaneous opening, difficulty in closing, loss of stability. The main reasons leading to such phenomena are deformation of the cabinet body, loss of verticality of the installation, mechanical damage, delamination or swelling of the material, failure of hinges or magnetic latch.

The most common cause is a broken hinge that requires replacement. Typically, kitchen furniture contains standard dish-type hinges with two adjusting screws. First of all, if there is a problem with the door, you should try to adjust its position by rotating these screws. If damage to the mechanism is noticeable, it is necessary to replace the loop with a new one. Such an operation is carried out in the following order:

The old loop is removed.
One of the plates of the new hinge is tightly installed in the round socket of the door (diameter - 35 mm) so that the hinge mechanism is strictly perpendicular to the side cut of the sash. The plate is secured with two screws through the holes in the lugs.
The second hinge plate is installed in a similar slot in the side of the cabinet and secured with two screws through the holes in the lugs.
Two screws are screwed into the corresponding holes. With their help, the position of the door is adjusted relative to the cabinet body and the second sash (if provided).

A common cause of spontaneous door opening is damage to the magnetic latch. The fact of damage is established visually, and if it is found, a new magnet should be installed. In this case, one should not forget about the presence of a reverse element, a metal plate on the sash, which must exactly match the magnets.

The reason for the skewing of the door may be the loss of the vertical position of the cabinet. Pedestals are characterized by subsidence of the legs under their own weight. In this case, place a solid support under the leg and adjust the cabinet installation. Hanging cabinets are characterized by loosening of the hinge hinge. To eliminate the defect, the cabinet will have to be removed from the wall and the hinge should be reinforced, for which more powerful screws are screwed in.

If the door is damaged, sometimes it becomes necessary to replace it. The new sash is made of chipboard with a thickness of about 20 mm, exactly according to the dimensions of the sheet to be replaced. In the workpiece, using a 35 mm cutter, 2 sockets with a depth of 12-13 mm are drilled according to the previous dimensions. The design of the outer and inner surfaces is carried out in the same way as the part being replaced. If the identity cannot be achieved, then the entire facade of the headset will have to be changed.

How are cabinets repaired?During long-term use of furniture, problems with the cabinet body may arise: loss of geometry, shaky state of the structure, etc. Repair will be simple if the cause of the problem lies in the fasteners. Usually, it is enough to tighten the nuts of the furniture screws or change the screws in the mounting angles, strengthening the joints of the cabinet panels. If such measures are not enough, then the cabinet is removed and inspected in order to find out the reason.Damage to the back wall can be one of the reasons. In this case, it should be removed, and a similar fiberboard sheet should be installed in this place. Fastening is done with small screws.For reliability, the joints of the cabinet panels are coated with glue (carpentry or silicone).

DIY wooden door repair

Contents of step-by-step instructions:

Electric drill.
Hacksaw.
Building hair dryer or special paint remover.
Sandpaper.
Putty.
Matt white enamel.
Paint in the desired color.
Brushes.

The most popular option for repairing doors from the material in question is the restoration of the canvas, which includes removing the old paintwork, eliminating existing defects and applying new paint or other finishing material.

Remove the fabric from the hinges and place it on a flat surface. Remove old upholstery if present.

Discard existing paintwork. The most convenient way to do this is with an ordinary building hair dryer or at least a liquid for quickly dissolving the paint.

In the case of using a hair dryer, be extremely careful - it heats the product to extremely high temperatures, so do not get too close to the surface to be treated.

Heat the coated area and remove it with a spatula. After about every 20 minutes, the hairdryer should be allowed some time to rest. You will find recommendations on this in the instructions for your instrument.

In the corners of the curtain and in other difficult places, work extremely carefully so as not to damage the material of the door with a spatula.

Get rid of all paint.

Start to roughly sand the door. Your goal is to remove any residual paint that has not been removed with a spatula.

You can sand it by hand or use a special sanding tool.

At this stage, you will need a wood-working putty. Apply it thoroughly to the surface of the product in an even layer. Allow the putty to dry, and then gently sand the canvas with a medium-grained sandpaper that can be nailed to a block of wood - this will make the work easier and faster.

Sand in accordance with the direction of the wood grain, excluding diagonal sanding and lateral movements so that no sanding marks will remain on the surface of the material.

If in the future you are going to varnish your wooden door, grind it as efficiently as possible, because even the smallest defects will be visible through the varnish.

After finishing sanding, dampen the surface of the canvas with clean water, and then additionally walk over the door with fine-grained sandpaper.

Before applying paint, the surface of the door must be cleaned of dust. To do this, it is enough to wipe the wood with a damp cloth.

Start painting the product. In this guide, the door will be painted in two stages. You can apply the paint with an ordinary brush. Apply the coating in the direction of the wood grain. One finishing coat will be enough.

Cover the canvas with white enamel. Apply paint of another desired shade to the dried coating. Matte enamel should not be very liquid.

How to paint a wooden door

Let the paint dry (you will find the specific drying time in the instructions for your paint and varnish composition), and then sand the surface with fine-grained sandpaper. This will level the coating and remove fine dust.

How to paint a solid wood door

Performed at the request of the owner. Usually, very liquid paint is used for toning, so the performer needs to be extremely careful and accurate, otherwise ugly smudges will appear.

You can use an ordinary brush to apply paint. Select the number of layers individually in accordance with the required saturation of the coating. Typically, two coats are sufficient to achieve an even and rich color.

How to paint a wooden door

Tinting paints dry on average within 6-12 hours (check in the instructions). After the paint has dried, sand the door with zero sandpaper.

In conclusion, you will need to reinstall the removed handles and return the door to its place.

Other finishing techniques can be used instead of staining. Check out the features of popular options and, if you wish, choose the best method from the list provided.

Self-adhesive photomurals on the Doorfix door

Wooden doors, pasted over with photo wallpapers specially designed for such decoration, look great. There is a huge selection of photowall-paper on sale, originally made in accordance with the standard dimensions of wooden doors. You can also order the production of wallpaper according to an individual pattern.

Vinyl glue-backed photomurals on the door

Self-adhesive photo wallpaper on the door

Instead of photo wallpaper, you can use other finishing materials. In general, focus on the purpose and design features of the room.

The door can even be pasted over with clippings from various magazines.

The door can even be pasted over with clippings from various magazines

If you plan to decorate your door with paper, soak it in cold water for a while beforehand, then cover each sheet with a thin layer of PVA and apply the paper to the surface of the door.

Smooth each sheet thoroughly to remove any air bubbles. Let the glue and paper dry, then cover the surface with clear varnish. It will protect the finish from fading and other damage.

Various types of fabrics can be used for pasting the door. In this moment, everything is limited solely by your imagination and preferences.

Stained glass methods can be used to decorate a wooden door with glass inserts. A large assortment of stained glass paints is available for sale, so there will be no problems with decorating the door.

Prepare stencils for applying the desired images to the door inserts. Draw the outline of the drawing, let the paint dry, and then fill in the planned areas with paints of the chosen colors.

Interior door finishing

With easy-to-use vinyl decals, you can give your wooden door any look you want. Before such decoration, it is not necessary to remove the old coating. You don't even have to remove the door from its hinges.

Vinyl stickers allow you to hide various minor defects in the door leaf.

Vinyl stickers allow you to hide various minor defects in the door leaf

To apply such a sticker, it is enough to carefully separate the backing from it, and then glue the material to the previously cleaned door surface.

Make sure the sticker is securely in place and remove the outer protective film from the sticker. If in some places the film is difficult to remove, warm it up a little with an ordinary hair dryer.

A variety of unusual decor techniques can be used to update the look of an old door. For example, some owners use a variety of bulk materials such as rice, buckwheat and other cereals.

Picture of cereals on the door

Buckwheat allows you to create quite beautiful and very original drawings. PVA glue is well suited for gluing loose material.

Apply glue to the surface of the door, sprinkle the grits in accordance with the selected pattern, let the glue dry, and then cover the surface with several coats of varnish.

You can not worry about the durability and safety of the finish - the cereal does not deteriorate and does not rot, and the varnish will provide it with additional protection from the harmful effects of moisture and will not allow it to swell.

In practice, repair work is not limited to only one restoration of the door. During the operation of a wooden door, a variety of breakdowns can occur. Some of them can be eliminated without any problems with their own hands, while others cannot be dealt with on their own.

We offer you short instructions on how to fix simple problems with doors of different types on your own.

The most common problem with laminated doors is flaking. This defect is especially common in the case of low-quality products of dubious production. Therefore, it is better to try to avoid excessive savings initially and buy high quality wooden doors.

Repair of laminated doors

If the problem does arise, the only possible solution is to completely replace the decorative edge. The edgebanding itself can be purchased from your specialist door and cover store.

Dismantle the old edge and attach the new trim in its place. It is recommended to use the same method for fixing the new edge as the old finish was fixed.

A traditional problem with all sliding doors is that the top rollers pop off the guide rails. The videos can pop out for the following reasons:

due to loosening of the bar to which the upper guide rail is attached;
due to the weakening of the adjustment mechanism of the carriages.

Sliding door mechanisms

In the first case, for repair, it will be enough to re-fix the upper bar. Remove the old fasteners and fix the product again using new dowels and self-tapping screws. The bar can be shifted or fixed in the same places - be guided by the situation.

To solve the second problem mentioned, it is necessary to re-adjust the door and place the locknuts under the adjusting bolts.

The importance of a door stop is often underestimated, and in vain. The presence of this simplest element can significantly extend the service life of a wooden door, especially its handles, hinges and other fittings. Therefore, you should not refuse to install the limiter.

If the door stop is broken, it is enough to simply dismantle the old product and install a new one instead.

Often the wooden doors are warped. This may be due to the following reasons:

loosening of loops;
swelling of wood.

In the first case, all repairs are reduced to adjusting the hinges to a normal state. In the second situation, you will have to make much more effort. You will need to remove the door from its hinges, remove excess wood with a planer, and then re-grind and paint the treated areas or the entire door, depending on the location of the treated areas and their size.

Thus, with very little effort and creativity, you can fix your wooden doors and update their appearance without any problems. Follow the recommendations received and everything will definitely work out.

Video (click to play).