Do-it-yourself apartment renovation where to start secondary housing

In detail: do-it-yourself apartment renovation where to start secondary housing from a real master for the site my.housecope.com.

Have you finally made a decision to renew the interior of your home? Then the knowledge of what stages of apartment renovation await us and how to observe their sequence will come in handy. So many, at first glance, imperceptible nuances can arise.

If you determine the sequence of actions in advance, the result will only please.

This is a chance to significantly save your budget, since you don't have to redo anything and buy in a hurry, while overpaying.
The duration of the work will be reduced. Self-organization always contributes to a faster completion of the case.

The first mistake of the owner, who decided to start construction work, is the thoughtless purchase of building materials. Often, due to haste, he buys a lot of excess, but what is actually needed, on the contrary, remains on the shelves. After all, even for groceries, it is better to go with a well-thought-out list.
Read how to start repairs in our article.
It all starts with an estimate. In this case, it is advisable to invite a specialist for consultation, even if only independent work is planned in the future.

Before starting the repair, it is necessary to develop a project and draw up an estimate
With a well-defined plan and a competent list of everything you need, you can start.

We draw your attention once again: to avoid mistakes, alterations and downtime during the repair process, be sure to adhere to the ready-made plan.

Step-by-step repair steps

It all starts with total preparation. Such jobs include:

removing old wallpaper;
dismantling of plaster;
destruction of walls and partitions not provided for in the new project;
removal of floors;
dismantling of surfaces intended for replacement.

Repair stages in a new building skip the dismantling stage, proceeding directly to the next step.

Dismantling the interior

First of all, they carry out work on the installation of communications. Before making repairs, you need to do all the operations that can destroy new coatings: installation of windows, doors, wiring and ventilation. Also, pipe wiring can be attributed to this stage.
Read more about this in our articles:

Video (click to play).

All old electrical wiring is removed and a new one is installed. The safety instructions for the placement of outlets will help you to position the electrical components correctly and use wires with a sufficient cross-section. For example, you should take care of the presence of thick wiring and grounding at the point to which the washing machine will be connected.

At this stage, you can change the entire layout of the apartment, bringing novelty and additional comfort to the interior.

With the help of partitions (especially if the extra walls are removed), you can create an office, a nursery, divide a bathroom.
Most often, bricks or foam blocks are used for such purposes, less often drywall. By covering the new wall with soundproof plaster, you can achieve more comfort. When creating partitions, it is important to take into account the squaring of the premises, sometimes it is better to leave one large room than to make five small ones. In addition, the creation of unnecessary partitions can lead to a violation of the natural ventilation of the apartment. So when erecting additional walls, be sure to consult with professionals.
Articles on our site on the topic:

For plastering work, it is recommended to use a ready-made cement-sand mixture (DSP) or gypsum plaster, which will eliminate possible mistakes in self-mixing the proportions of sand and cement. If there is not enough experience in such work, it is still better to hire specialists.Firstly, it saves time, and secondly, you do not have to redo unsuccessful work.
More details:

Pouring concrete, equalize the floor. The quality of these works will affect the subsequent placement of furniture in the room. Probably more than once faced with the problem of leveling a table, chest of drawers, armchairs and, more significantly, a washing machine. A good screed will help avoid such difficulties in the future.
More: leveling wood and concrete floors.

At least a week should pass between the screed and the installation of drywall for the room to dry out.
We install the iron sectional base, leveling the surface of the ceiling. Then we mount the drywall sheets.
More detailed articles on this topic:

If you have not encountered such work before, then it is better to invite a specialist. The cost of fixing a marriage is much higher than paying a professional. After all, the tile itself is not cheap, and any possible flaws will be visible from the outside: this is usually the most beautiful and conspicuous part of the interior.

Moreover, the complexity of the work directly depends on the complexity of the pattern on the tile.
More details in our articles:

The stages of bathroom renovation are slightly different from those in other rooms:

design;
dismantling;
installation of pipes;
finishing work on the ceiling;
installation of electrical wires;
finishing work on walls and floors;
installation of lamps;
installation of ventilation and heating equipment;
door assembly.

The stages of repairing a bathroom are shown in the video:

So, whether the walls are painted or wallpaper is glued, this is already starting to give the room a complete look. We have come to the finish line!
Details in the following articles:

Experts were divided about the sequence of actions at the last stage. Some believe that wallpaper should be glued after laying the floor covering, others - on the contrary. But most still prefer to finish the renovation activities with flooring.
Read also:

With the wall covering sorted out, the floor looks as it was intended. The repair is over!

Careful planning of the course of renovation works greatly simplifies the matter and saves the budget. Do not be lazy to calculate everything in advance (preferably, together with a specialist).

It should be noted that the stages of bathroom renovation are slightly different due to the increased complexity. But the right approach to work makes any difficulties insignificant and easily surmountable. We wish you successful installation work!

How to start repairs in a new building from scratch. The sequence of stages of repair in a new apartment.

Wall design with wallpaper. How to correctly combine different types of wallpaper, interior photos. Tips for choosing colors and patterns.

What to look for when buying a screwdriver. Performance instructions and tips for choosing. Battery type and capacity, power.

Most of the happy owners of apartments on the secondary market are concerned about the arrangement of their real estate. Before starting repairs, you need to decide on its scale. Some secondary housing only needs a cosmetic update.

But it happens that a major overhaul of secondary housing is required with the replacement of all communications. If you do all the work yourself, you get a good economy. Before proceeding with the alteration, it is necessary to decide what work will be performed and where to start the repair.

Overhaul

There are usually stages such as:

Coordination of redevelopment of premises.
Replacement of electrical wiring, sockets, additional lighting. Change of water supply and drainage pipes, as well as plumbing fixtures. Renovation of the heating system.
Replacement of window frames, interior and exterior doors.
Performing the necessary additional work before finishing walls, floors, ceilings.
Change of old finishing materials.
Installation of built-in furniture and appliances, if provided.

Redecorating

It can be limited only by changing the finishing materials on the walls, floor and ceiling, relying on a ready-made design project. But before such a replacement, it is necessary to thoroughly prepare the surfaces.

There are three reasons for this.:

To prevent new decorative coatings from falling off along with old putty or plaster.
So that new finishing materials do not deteriorate while working with them.
So that the chosen finish looks right.

So that the work does not end ahead of time, due to the lack of material support, it is necessary to correctly calculate the forthcoming costs. Depending on what you are going to repair, the necessary measurements of the room are made.

Knowing the size of the room, you can make any calculation. Then, in specialized stores, the prices of the building materials of interest are monitored. It is worth making a separate expense column for kitchen repairs if built-in appliances are installed.

Upgrading multiple rooms is best done in stages, starting with the farthest. This will help to avoid excess dirt that is formed from construction debris. Still, such a sequence will help solve the problem associated with the release of the renovated room from furniture.

Where to start renovating the kitchen - with drawing up a design project. He will show you exactly where to place the sockets with switches, where to lead the pipes, at what height it is necessary to lay the apron of the working area. Therefore, it is better to repair the kitchen step by step, relying on the design.

In order for the repairs in the apartment to proceed systematically, it is necessary to follow a certain sequence.

Dismantling work

The beginning of the overhaul begins with dismantling work. Old finishing materials are removed from walls, floors, ceilings. If necessary, openings are changed and unnecessary partitions are demolished.
When repairing a one-room apartment, it is better to dismantle it in all rooms at once - in the room, in the kitchen, in the bathroom with a toilet and in the corridor.

This will save money on garbage disposal. If the repair of a two-room apartment is or more, then the dismantling can be done one by one, in the sequence which premises will be repaired.

Surface preparation

After the dismantling, it turned out to be an unfinished apartment. In the empty "box" the power supply system is replaced, all openings are prepared, new additional partitions are erected and the walls are plastered. Water supply and sewerage pipes, heated towel rails and heating radiators are being changed.

You need to carefully consider the water supply and power supply systems when making repairs to the kitchen and bathroom.

Aligning walls and ceilings

As soon as all electrical wires and pipes are hidden in special grooves, the walls are aligned with the ceiling by plastering and puttying. It's worth starting from the ceiling. The evenness of the surfaces is checked by the level.

Ceiling repair

The leveled ceiling can be painted, wallpaper or stretched. It all depends on what kind of design the room has.

The kitchen ceiling or in the bathroom must be made in such a way that large condensation does not form on it. Otherwise, mold will form in the future.

Replacement of windows and doors

When replacing windows, all cracks must be carefully insulated or filled with polyurethane foam. Then the window sill, slopes are installed, and outside - the ebb. During the entire process, it is necessary to monitor the evenness of the installation. This is necessary so that the window does not warp during operation.

It is better not to remove the protective film from the windows until the end of the repair work. Door frames are usually easy to install. The main thing is that everything should be set according to the level.

After completing the work on the ceiling and walls, you can proceed to the floor. When making repairs to a three-room apartment, furniture and things can be transferred to the new floor only then the skirting boards will be installed.

The old coating is removed from the floor, a leveling screed is made. Only after the floor is level over the entire surface can you start laying decorative materials.

Bathroom and toilet renovation

When repairing a bathroom with a toilet, you should pay special attention to the tightness of the installed pipes and water supply to the plumbing.

In such rooms, decorative coatings are chosen that are not afraid of moisture. A new bath, shower, toilet and bidet are being installed. In rare cases, the restoration of the bath enamel is done.

When purchasing materials, it is necessary to make a small stock in order to avoid a shortage of it during repairs.
So that the work does not get up, it is worth preparing all the necessary tools in advance.
Dust will settle much faster if water is sprayed with a spray gun during dismantling or chipping.
Partitions to be demolished should not be classified as load-bearing walls, as their dismantling is strictly prohibited. Especially if it is a panel house.

How to make repairs in an apartment

Where to start repairing an apartment so that the repair work does not stretch out for an indefinite period, and the end result undoubtedly pleases you, this is what will be discussed in today's article. Renovation of the apartment requires serious preliminary preparation. The most important point is drawing up a detailed plan for future repairs, taking into account the smallest nuances. Consider, point by point, the advice of professionals on the correct organization of repair work in houses and apartments. Image - Do-it-yourself apartment renovation where to start secondary housing

First of all, you need to decide on the complexity and volume of future repairs. To make the apartment bright and clean, sometimes it is enough to carry out cosmetic, superficial repairs: replacing the wallpaper, whitewashing the ceiling, changing the old linoleum, painting the walls, etc.

If you want to completely get rid of everything that is boring and old, decide on a major overhaul with the replacement of windows, leveling the walls, installing new floors, modern ceilings. Your home will be transformed and become new and beautiful.

You should not refuse the help of experienced specialists when carrying out major repairs. This is especially true for the creation of a modern design for your apartment, including redevelopment and the demolition of some walls and partitions.

Plan renovations based on your financial capabilities.

First, decide on the interior and design of each individual room that you plan to change in your apartment. You can seek advice from a professional designer, which will slightly increase your total financial expenses for repairs. For rooms where renovation will be carried out, it is necessary to complete detailed drawings of the successive stages of repair work.

We recommend that you complete five detailed renovation sketches for each individual room. In the first drawing, display the top view of the room, and in the other four, each wall. Complete each drawing with a detailed description and a plan for the sequential implementation of repair work, which will avoid omissions and inaccuracies in the work.

When drawing up a repair sketch, it is recommended to indicate:

Think over the location of the furniture. Those walls that will be most conspicuous need to be given special attention and use the highest quality finishes.
Think about where it would be best to place lamps and chandeliers so that the light illuminates the room as much as possible.
Given the location of the household appliances, indicate the locations for the outlets. To then correctly design the installation of electrical wiring in all rooms.
Consider the location of the main decorative elements: paintings, mosaics, brick walls.

In the repair plan, you need to indicate the desired finishing option: wallpapering the walls, painting, etc. To divide a room into separate zones, designers recommend painting one of the walls in a different color in order to focus on it and visually divide the room. These moments also need to be reflected in the plan.

According to the advice of experienced professionals, in order to avoid unnecessary dirt and dust when carrying out repair work, it is recommended to first of all carry out repairs in the rooms farthest from the front door. The final stage of the repair, it is advisable to choose passage rooms and a corridor through which building materials and tools are constantly sweeping. This is necessary in order not to stain or scratch the finish of the already repaired wall, not to damage the new floor.

An additional protection of the repaired room can be a cellophane film (fixed on the outside of the door), which will reliably protect the room from construction dirt, dust, plaster, paint, and accidental damage.

Do not carry out all repairs yourself. At your request, the execution of all repair work or only the performance of particularly complex repair operations can be entrusted to qualified specialists. Firstly, experience and knowledge will allow them to carry out repair work quickly and efficiently. Secondly, you do not have to additionally buy expensive tools, with the help of which the screed is ideally poured onto the floor or the tiles are laid out.

Even if the installation of an interior door seems easy to you, the slightest inaccuracy is unacceptable here. Of course, you can hang and arrange kitchen furniture, level the walls and paint a little yourself. But entrust more complex repair work to specialists so that you do not have to redo it, which can significantly increase your financial costs for repairs.

#one. After the final choice of the design of the appearance of the rooms, furniture and interior, it is necessary to draw up a complete list of the necessary building materials. Their number and total cost depends on the amount of repair work and how they are carried out. If the budget allows you, you need to purchase building materials with a small supply.

# 2. Make a separate list of decor items: holders, shelves, mirrors, paintings, etc. Start your purchases with the selected decor elements. If the planned decor element is not available, you can quickly change or create a new design version of the apartment renovation.

# 3. Make a list of the building tools you need to carry out the renovation work. To do this, you can use the advice of a sales assistant in hardware stores or qualified repairmen.

When the preparatory work has been carried out: plans and sketches of the repair have been drawn up, lists of the necessary materials and tools have been prepared, a decision has been made about the possibility of self-repair or with the help of repair specialists, you will be able to calculate the approximate total cost of the planned repair.

You should not rush to purchase all the materials when you visit your first store. In the compiled lists of materials and tools, put down the prices of different stores, which will allow you to make purchases at a minimum cost. Carefully consider the choice of repair crew services. Pay special attention not only to the proposed cost of repair work, but also to the feedback from your friends about the quality of repair services.

To protect furniture from damage, construction dirt and dust, collect it in a central area of the room. Then carefully cover with plastic wrap. This will free up access to the walls and ceiling. Move expensive equipment and clothes to other rooms.

Repair work should start with the most dusty ones: replacing window blocks, window slopes and installing new window sills. This will avoid dirt and dust during painting work, when it is forbidden to open windows in order to avoid temperature extremes and an increase in humidity. When windows, slopes and sills are installed, cover them with plastic wrap or hardboard to avoid accidental mechanical damage and contamination.

Mark the installation locations of additional outlets, make the electrical wiring. Do not install sockets or plug them into the enclosure at this point.

In the case of welding work (for example, when replacing heating radiators), do them at the same time in different places of the apartment in order to quickly complete this dusty and difficult stage of work, sometimes including breaking down walls.

Before repairing walls, floors, ceilings, you must check their condition with a laser or water level. Begin by applying the thickest layers of mortar. As they dry out, you can carry out other minor repairs without downtime.

After completing this preparatory stage, proceed with the repair work, performing them in the following sequence: repair of the ceiling, walls, floor. Initially, work is carried out using putty, cement, gypsum mixtures. Then they begin to work on the installation of the floor, doors, slopes.

Final repairs:

Pasting or painting the ceiling.
Wallpapering or painting the walls.
Installation of flooring.
Installation of skirting boards, sills, platbands.

Where should you start repairing an apartment or a separate room in order to do everything in the best possible time, not overpay and get exactly the result you expect?> I put everything on the shelves so that your repair turns from a state into a process. Image - Do-it-yourself apartment renovation where to start secondary housing

We will tell you about the main nuances that should be taken into account during various transformations in apartments, including in "Stalin", "Khrushchev" and "Brezhnev" houses.

We have prepared a list of questions that you should ask yourself and the construction team before starting the renovation. Answers will help you finish work faster and spend less money and nerves.

Without a well thought out plan, the renovation will turn into a natural disaster. We tell you what nuances you should definitely pay attention to, as well as list the procedure and terms of work in order to make your task as easy as possible.

Any repair and construction work involves an important stage - the execution of documentation: design, estimate, contract and executive. He is often overlooked. Dealing with official paperwork is quite troublesome, but it will help you to protect yourself from problems in the future.

When arranging a home, it is important to provide for convenient access to hidden elements of engineering equipment - valves and pressure reducers, siphons and filters, meters and regulators. This means that you cannot do without inspection hatches. Here's how to choose the perfect one.

Before starting repairs, it is worth deciding on the complexity and volume of work to be done. Sometimes superficial transformations are enough to make the apartment look fresh and cozy again. New wall decoration, replacement of flooring, reinstallation of doors - all these are parts of cosmetic repairs, faster, more economical, but at the same time not solving serious problems in the apartment.

When more global changes are required, major repairs begin. It includes redevelopment of space, demolition and construction of new partitions, replacement of pipes, electrical wiring and heating elements. Such repairs are an order of magnitude more expensive than cosmetic ones and lasts longer - but after them you get an absolutely renewed home.

Any type of repair can be done independently or with the help of specialists. The first option is less expensive, but does not guarantee a 100% result. If he is closer to you, check out our useful instructions and master classes - they will help you complete the work no worse than an experienced craftsman.

Repairing with a contractor seems like a safer choice, but there are pitfalls here as well. How to choose a good specialist? How to draw up a construction contract correctly? Comprehensive answers to these questions are collected below.

Features of drawing up a contract for construction or repair work: specifics, main points, estimate and design documentation.

When repairing, the question certainly arises: who should be entrusted with the work - a large company or private craftsmen? We compare both options and talk about the pros and cons of each.

We will tell you about all the intricacies of agreeing on the redevelopment of an apartment, including the one already done, so that you do not drown in bureaucratic delays.

We tell you about the main stages of the repair and the approximate time required for their implementation, as well as offer several life hacks on how to speed up the process.

The most burning aspect of the future renovation is the financial one. First of all, you need to decide how much the selected work will cost and what the money will be enough for; what and how you can save money, and what it is better not to skimp on.

Another important aspect is the preparation of a repair estimate, on the basis of which its approximate cost is estimated. There are other questions regarding the budget: for example, is it worth the investment on repair insurance?

Our tips will help you deal with all the financial nuances. And with the help of simple and understandable calculators, in just a couple of clicks you can calculate the approximate cost of renovating an apartment or a separate room and the cost of building materials.

To prevent home or apartment renovation from emptying your wallet, you need to properly optimize your spending. We will tell you how to do this at the planning stage and during the process itself.

In addition to the previous article in this section, we will allow ourselves, dear readers, to tell you one short story that happened last summer with one gentleman, and show you a certain table, which the performer called an estimate.
Why it is so significant, you will very soon understand.

When starting a renovation, a zealous owner first of all picks up a calculator. However, he will receive expenses close to the real ones only if he takes into account various factors and nuances, including those that are not obvious.

Indicate the main parameters of the apartment, select the type and cost of work and materials and find out how much it will cost to renovate your apartment.

The harmonious and modern interior of a small Moscow apartment in an old building combines tranquility and emotionality, openness and introversion.

A married couple with a teenage son dreamed of an interior in which the loft style would be combined with the traditional layout. Under this condition, it was extremely important to keep the "light breath" of this apartment near Moscow.

The design of the first floor has an original interpretation of the aviation theme. On the second level, the advantages of high ceilings are used and a mezzanine floor is arranged.

The design of this St. Petersburg apartment combines laconic forms and elegant details.

So that the repair does not stretch indefinitely, it is necessary to correctly plan it. To do this, it is necessary to take into account the procedure and terms of repair work, familiarize yourself with the legal framework, find out what documents will be needed for the transformations and how to draw them up. And that's not all. It is important to understand whether it is worth seeking help from a designer and how to think over the redevelopment so as not to drown in a series of approvals.

Knowing all these details, you will save time, money and nerves, but, most importantly, you can be in your new apartment as soon as possible.

Do you want to be surrounded by a modern interior, but can't articulate how it should look? Something you like about friends' apartments, something attracted you in magazines, something is difficult to decide on. Is it much easier to say what you don't want categorically? Only a professional will help you to understand your preferences and make the best decision.

We will tell you about repair and civil liability insurance, the features of insurance products, insurance risks and the cost of the policy.

On the forums of potential new settlers, battles over finishing from the developer have not subsided for many years. Is it worth spending additional funds on a ready-made standard repair, or is it still cheaper to buy an apartment and do the finishing yourself?

What can and cannot be done during redevelopment? What types of work do not apply to it? In what cases can you attach a balcony or loggia to a room? We answer the main questions about the global change of the apartment.

The amount of work that has to be done during the renovation is truly enormous, and in order not to drown in the sea of construction and finishing problems, competent and precise planning is necessary.

Choosing a new apartment design is a very important task that takes a lot of time and effort. And it's not only about creating a beautiful interior: with the help of a thoughtful design, you can change the geometry of the space, visually increase the size of the room, create a suitable atmosphere and mood. Take on board the best design options, interior trends and design life hacks - they will help you quickly decide on the future look of your apartment.

We have prepared a detailed overview of the most famous interior design trends. With its help, you can easily create the desired atmosphere in the apartment.

In our selection - only those styles that look organically in the interiors of small apartments, make the rooms light and airy and visually expand the space.

Let's talk about the 60-30-10 rule and five more important nuances of choosing an interior palette in a question-and-answer format.

Do you think Porsche is only a car brand, and the backstage exists exclusively on the set? No - all these are also the names of current interior styles. These and other fashion trends are in our selection.

These tips will help you visually enlarge the apartment and find a place where it seems to be practically nonexistent.

A modern interior is often built on a mixture of styles, and everything must be done so that it does not represent a random set of things, but looks whole and harmonious. Our simple and straightforward tips will help you cope with this task perfectly.

From timeless classics to relaxing Mediterranean style, we have selected for you the most relevant directions for a modern interior.

Where to start repairing an apartment so that the repair work does not stretch for an indefinite period, and the end result is sure to you

You are professional
architect or
designer?

Site> - the leading Internet project dedicated to the reconstruction and interior design of residential premises. The main content of the site is made by the archive of the magazine Ideas for Your Home - exclusive author's articles, high-quality illustrations, practical advice and lessons. A team of professionals is working on the project in close cooperation with renowned designers, architects and leading experts of the publishing house.

On our site you can find complex design solutions; view detailed reviews of the market for building and finishing materials, furniture, machinery and equipment; compare your own ideas with the design projects of leading architects; communicate directly with other readers and editors on the forum.

Are you a professional architect or designer?

Sooner or later everyone will spend DIY repair in an apartment or house ... Therefore, the question is: "How to start repairs correctly?" - is very relevant, and you need to approach its decision seriously.

We are starting repairs. We plan and think about the upcoming work

Photo 1 - Stages of repairing an apartment with your own hands

Before proceeding with the independent repair of the apartment, you must first draw up a plan of all the premises, indicating the location of furniture and equipment. Thus, it will be possible to determine where the sockets, ceiling lights, etc. will be located. This must be done in order to properly design the piping and wiring.The convenience of using the premises in the future will depend on how competently it will be performed.

If you do not like the existing layout of the apartment, then the repair should be started with the demolition of the walls or with their construction.

No less important is the style of the future room, which may be the same for all rooms or have cardinal differences. If it is difficult to decide on this issue, then you can resort to the services of a designer who will take into account your preferences and features of the apartment.

After thinking well and weighing all the points, you can start calculating the amount of necessary materials and purchasing them. It is better to divide the repair work into stages, which will give the process a certain planning.

It is impractical to start repairs from a walk-through room or corridor, because work in other rooms can negatively affect their appearance.

The repair begins with the so-called dirty work:

Photo 2 - The first stage of the repair - remove the old wallpaper from the walls

It is necessary to remove old wallpaper, whitewash, tiles and other finishing materials. If the floor has not become completely unusable, then it should not be touched yet. In the event that replacement is not provided, it should be carefully covered with plastic wrap, and its edges should be securely fixed with masking tape. To protect the floor from mechanical damage, it is better to use cardboard, it is much more reliable than paper.

To prevent dust from settling on doors and windows, it is better to leave the dismantling of old doors for later. You only need to remove the cashiers.

Photo 3 - The second stage of the repair - we cut the walls for wiring and pipes

This work is the dirtiest, but at the same time responsible... It will be very difficult, and sometimes impossible, to redo such works later without carrying out a new major overhaul.

It is not wise to save on plumbing, as well as on electrics. Wires and pipes hidden in the wall cannot be repaired.
The walls should be channeled according to the scheme, which will need to be saved, so that later you do not accidentally drive a nail in a dangerous place.

It remains to lay the wires of the required cross-section and pipes, it is better to use propylene and neatly close up the grooves.

photo 4 - The third stage of apartment renovation - we dismantle old windows and doors

It is distinguished by its laboriousness, since right now it is necessary to dismantle the old windows and install new ones.

To protect new windows from dust and accidental splashes, they can be protected by covering them with foil. There is another way - to use pleated paper curtains, which looks more aesthetically pleasing and is inexpensive.

Next, you need to perform a rough finish, that is, prepare the floor and ceiling for finishing. Such jobs include:

The material for roughing is selected depending on the type of finishing. Experts do not recommend saving on these materials.

Photo 5 - The fourth stage of apartment renovation - priming of all surfaces

Applying a primer allows you to make the wall or ceiling is much stronger... The primer contains elements that have the ability to penetrate deep into the surface to be treated and connect small particles. Now you need to wait until it is completely dry and you can start painting the ceiling.

Photo 6 - Do-it-yourself apartment renovation. Floor leveling stage

If the floor remains old, you can skip this step. Otherwise, you need to fill the base from a modern self-leveling solution, or work on the screed. Only after complete drying can you move on to other work.

Photo 7 - The sixth stage of the renovation - finishing the walls in the apartment

Depending on your preferences and financial capabilities, material is purchased for wall decoration. You can glue wallpapers, the choice of which is extensive not only in color, but also in material, texture, size. For example non-woven wallpaper. Many options include painting, as well as decorative plaster. There are more exotic finishes, it all depends on your desire and the overall style of the room.

Popular wisdom says: the leftovers are sweet.This means that you can buy leftover wallpaper, the price of which will be lower, and create an original combination.

It's time to start laying the floor covering. For this purpose, you can use: linoleum, laminate, carpet, block parquet or a more modern version - parquet board and other materials. If a decision is made to lay the floor tiles, then they begin to install it only after all work on the ceiling has been completed.

Photo 7 - The last stage of the repair - the installation of interior doors

Door frames, thresholds, skirting boards, etc. are installed. At the same time, wardrobes are assembled, furniture is arranged, and decorative elements are added.

Video (click to play).

Now you need to thoroughly clean all the rooms and you can enjoy the result.

Rate the article:

Grade 3.2 who voted: 84