How much does it cost to repair an apartment with your own hands?

Nowadays, before you start repairing an apartment with your own hands, just one desire is not enough, you need to calculate not only your physical, but also material capabilities. It is always difficult to take the first step to start repairs, and now, finally, the cup of patience is overflowing, we succumb to an impulse - with a resolute hand we tear off the old boring wallpaper. Hooray! The renovation has begun. We usually do this before we come to the store and see the prices for building materials.

Many have heard more than once from friends they say: "I do the repairs myself and therefore I can always find a cheaper option." Or someone offers recipes for budget repair solutions. Personally, I don't know how they do it. When I come with my wife, for example, to a women's clothing store, and if my wife asks me “which blouse is better,” I manage to poke at the most expensive one. So with building materials, in order not to go broke on the price tags, you have to look first.

The price of building materials usually depends on two factors: quality + manufacturing technology of the material, and the greed of the seller + the number of dealers. You have to choose from the well-known "price-quality" ratio. The choice here is simple: either cheaper for the short term, or more expensive for a longer period. The pros and cons are obvious.

Choosing an inexpensive repair, you get undoubted advantages:

• saving money;
• freedom in the choice of materials and technologies, you can try everything, and if you don’t like it, remake it in a couple of years;
• with a limited budget, you buy all building materials at once, and the repair time becomes manageable.

I do not want to darken the rosy picture, but when using inexpensive building materials, their early aging is possible with all the ensuing consequences.

If you choose to renovate without budget restrictions, you will be able to:

• permanently solve the problem of repair;
• master new repair technologies, successfully do what previously seemed available only to professional builders;
• and also get the aesthetic pleasure of unearthly beauty in your apartment and the opportunity to boast and surprise many.
• but also a fly in the ointment in the form of wasteful spending for the family budget on building materials.

And one more important detail. With decreasing funding, especially in the last stages, the repair is delayed and becomes simply unbearable.

Go to a building materials store, make a list, taking into account the consumption per square meter or running meter, calculate the price and multiply the resulting number by two! If you chose to repair without hesitation in funds, then multiply by three!

Shocking mathematics. But that's usually how it works out. If you use the help of professionals, then the price for the work is approximately equal to the cost of materials. In addition, it is never possible to take into account all the necessary details and buy everything you need in one go. If you think professional hired builders don't forget to buy something, then I dare to disappoint you. They do it even more often than mere mortals, only they don’t tell you about it.

As you know, price tags in stores are designed to artificially lower the price of a product. You yourself will not understand why it turned out more expensive: discount cards may not apply to some goods, you can make mistakes with material consumption, and other pitfalls. Often, even during the usual cosmetic repairs of an apartment, plans have to be changed, and the price of a new technical solution only becomes more expensive.

The usual everyday business: the apartment clearly needs repair, but there is little money.How to make an inexpensive do-it-yourself apartment renovation? It seems to be the simplest, obvious way: superficial cosmetic repairs. That is, plywood wallpaper, ceiling whitewash, painting, fixing squeaky floors; possibly - replacement of windows.

However, if we calculate the labor costs and the consumption of materials, it turns out that by increasing the labor costs by half, and the expenditure of money by a quarter, you can give the apartment a completely different look, and for a long time. How much you need to invest specifically depends on the prices in the region, but the general methods by which you can make an apartment cozy and elegant inexpensively are the same.

Saving money when repairing an apartment with your own hands costs, like the Earth in ancient legends, on three whales and a slowly hurrying turtle under them:

1. We are not afraid of work. Nothing happens out of nothing. Or money or labor.
2. Wherever possible, we do not change the old, which has lost its appearance, but renew it.
3. We attribute the maximum savings to the place where it will not affect the quality of work and will not be visible.
4. We distribute the costs of labor and money in time: having conceived repairs in the summer or autumn, we spend a year on preparation, and then we pile up and quickly do everything. To lay out 200-300 thousand rubles at once is a problem, but breaking them up in parts for a year is quite possible. In addition, there will be time for seven times measure - cut once.

The only area where you will have to invite a specialist is alteration and strengthening of electrical wiring, if it is old and weak. Here, the only way to save money is to negotiate with the DEZ electrician. He will do the work in pieces, in his free time, but the likelihood of hack-work will be even less than that of "branded" specialists: after all, he will then serve all this.

It is better not to save on electrics and wiring, but some points, such as installing sockets, can be done independently.

A good specialized tool makes the job much easier and cheaper. But buying it is expensive. Therefore, it is better to rent a tool as needed. In terms of costs, it will come out a little if you decide in advance on the design and draw up an approximate plan for the production of work for yourself.

The best time of the year for self-repairing an apartment is early and mid-autumn. It's still warm, you can do outdoor work, and indoor work with open windows. And at the same time, prices for building materials will already fall significantly on the eve of the winter calm. Savings without loss of quality can be up to 15% in the sale of summer illiquid assets. If, for example, 200 thousand are postponed for repairs, then the savings will amount to 30 thousand, and this - a hallway or a bathroom - "candy".

Special mention should be made of non-liquid assets. A significant share of the cost of repairs will be spent on finishing materials: plaster, putty, floor leveler, assembly glue, sealant. All of them have a limited shelf life, so construction companies, which clearly do not have leftovers from the season to spring, are selling them at a bargain price. Therefore, look everywhere in advance for advertisements on the sale of building materials. Professionals do not need 50 kg of Aquaslay for leveling the walls, which expires in a month, but they will be enough for two rooms for you. The savings will be 70-80 rubles. everything, but the hen pecks by the grain.

Find more ideas on how to save on building materials here.

A sore point for cheap self-repair is the replacement of plumbing. If it is still "alive", only filthy, then it can be cleaned and painted. How to do this will be described below. But if there are chips and cracks, then whether you want it or not, you need to change it.

For such a case, here is information for you: new settlers, especially in houses above the budget category, often immediately start major repairs at the entrance, and excellent, completely new faience and cast-iron plumbing ends up in a landfill. Landfill operators (simply landfill scavengers) have long turned this circumstance into a profitable business.

They do not make direct contact with strangers by office phone, but it is quite possible to reach them using word of mouth methods. The rate is from one third to one half of the factory price for a household item. And do not think that you will be taken to the dump and shown where it lies. In the back room you will be offered a choice of clean, carefully washed products, which you can sit on even right away.

The next sore point is the removal of construction waste. The operation is not cheap and requires a lot of paperwork. Exit: a basement, a barn, a summer residence or a closet and a few used bags of plastic sackcloth, bought for a penny. Construction waste does not sour and does not rot, it can then be poured into a container in a house trash can. There is nothing illegal in this.

For lathing, various ancillary work and sewing large surfaces, you will need wooden battens and plywood. You can buy slats not planed, but a slab - waste from sawing industrial wood. The croaker is on sale raw, but if it is purchased in advance, in March-April, and kept in a dry room until autumn, it will not be inferior to edged timber in terms of the quality of wood.

As for plywood, waste packaging plywood from disassembled used containers can be turned into water-resistant in the following way:

• We buy a 10 l canister or two PVA putties; it looks like a very liquid PVA glue and is cheap.
• We cover the floor in the country house, in the shed, in the attic or in some other non-residential premises with plastic wrap. The air temperature is not lower than +13 degrees.
• We lay a sheet of plywood on the floor, pour a puddle of putty on the center of it and disperse it with a brush.
• We cover the plywood with plastic, lay the next sheet, putty in the same way, etc.
• We put heavier oppression on the plywood soaked in PVA; better - dispersed over the area: bricks, pieces of metal, concrete, old TV, etc.
• After a week, we repeat the procedure, turning each sheet over.
• After another two weeks, the smooth, waterproof plywood is ready for use. Additional exposure under pressure will improve its quality.

Boards and large pieces of thick timber can also be obtained from used containers - pallets for cargo. Advertisements for their sale are not uncommon.

A very economical repair option - sheathing the walls and ceiling of living rooms with laminate; for thrifty owners richer - MDF. When cladding on a wooden lathing from a slab, in 80% of cases, alignment of walls and ceilings is not required, which already excludes large expenditures of labor and money.

You can save even more by sheathing the walls up to your waist or up to your chest, and pasting them up to the ceiling with non-woven wallpaper. The work is simplified and cheaper, and the bottom of the walls, which breaks and gets dirty the most, will be reliably protected by resistant material.

The most economical flooring option is marmoleum. Floor preparation for it is not required in 90% of cases. But marmoleum is not suitable for a bathroom and toilet; here you will have to fork out for tiles, especially since you will need a little of it.

If you want to have a plank-like floor in the rooms, then laminate flooring will not be much more expensive, but the floor may need to be leveled.

The walls in the bathroom can be covered with laminated hardboard instead of tiles - it is hygroscopic and does not require surface preparation.

If you intend to glaze and insulate the balcony, then it is better to do it separately from everything else and in advance: from the end of March to the beginning of May. Outside, the balcony is decorated with siding, but inside it, instead of traditional MDF or lining, you can sew it up with plywood, pasting it with self-adhesive film.

When deciding how to make an apartment renovation economically, you need to pay special attention to windows and doors: they account for a significant share of the costs. As for windows, here is the most economical option: self-installation of wooden window frames. It is more expedient to buy them in March-April, when prices for commercial timber fall, and to put them in late spring - in early summer, when the tree dries out and shrinks properly.The technology of installing wooden windows into openings is quite affordable for an average home craftsman.

It would be better to update the doors. Remember your homemade waterproof plywood? Here it is sheathed both sides of the door, on mounting glue, laying the door removed from the hinges on a plastic mat and under oppression. At the same time, at the same time, you can cover the window in the interior door, if it is not needed.

This will make the door thicker. Two options are possible here:

1. Reinstalling the hinges is not the best way for the lazy.
2. Remove the old lining from the door; it is most often made of building cardboard or thin fiberboard, and put on a new, plywood frame. In this case, the chipped corners immediately "go away".

In both cases, the new door is pasted over with self-adhesive wood or with a different texture and varnished. And you will be surprised (pleasantly, of course) with her new look. And the hard plywood cheeks will ensure the door's durability. It is better to cover the slopes of the doorway with doborks from the same plywood: it will come out cheaper and more beautiful than re-plastering.

Dirty plumbing, if intact, needs to be cleaned. The rather expensive active detergents recommended for this can be replaced with much cheaper table vinegar - after all, it is also a weak acid - followed by washing off the sagging deposits with the most common washing powder. Just do not use abrasive detergents - they will scratch the glaze and objects, especially the toilet, will get dirty very quickly.

For cleaning with vinegar, make kvash - a knob made of a rag on a stick. Vinegar is poured where it does not leak, or sour milk is dipped in it, and the drips are cleaned with circular motions with pressure. Particularly "stubborn" spots in the grooves are removed with small kvash and technical hydrochloric acid. All this, of course, is done with latex household gloves, a plastic apron and with doors and windows open. It is also advisable to wear a respirator, at least a cheap "petal".

Tiles that are not chipped or cracked can be restored using a method well known to motorists; they renew the worn-out plastic spoilers and bumpers in this way:

• The entire lined surface with my pemolux; it is impossible to use active acid detergents! For a bathroom in "Khrushchev", 1 liter is enough; on a larger - respectively more.
• After pemolux, we wipe it with a rag, abundantly moistened with the same table vinegar: pemolux is alkaline, and the vinegar neutralizes its residues.
• We wipe it several times with a wet cloth "to a clean cloth"; now we got rid of the dirt stuck into the surface.
• We glue the edges of the tiles with masking tape ("paper tape"), except for the seams.
• We paint the seams from a spray bottle with nitro paint in two layers; the second - after the first is completely dry.
• We remove the tape; we remove splashes and drips of paint on the tiles with a cotton swab moistened with solvent 646 or 647.
• We buy a can of liquid silicone grease at the car market or in a car shop, and properly spray the tiles with seams.
• If the grease is absorbed immediately, you will need to spray it again.
• If after 2-3 days silicone is still "taken" on the tile, wipe the surface with a rag moistened with vinegar.

The meaning of this treatment is that the silicone tightens microcracks and pores in which dirt accumulates. Processing is enough for 3-5 years, and then it can be repeated.

The cast iron capital bath can be repaired with epoxy or acrylic resin. Complaints about its fragility arise from a violation of the technology for preparing the coloring composition and its application. With strict adherence to the technology, the restored bath will serve for another 10-15 years.

It is not at all necessary to change it to an expensive stainless steel or brass and make a bypass (bypass) for it. The heated towel rail is cleaned to metal after cleaning the bathtub for painting with the same cord-brush in the drill chuck. If no fistula is found, it is painted with the remains of the compound from the bath painting.The look will be no worse than modern branded ones, and the durability is like a bathtub.

On fasteners during repairs, you can save up to 1000 rubles by using not galvanized or cadmium plated (shiny), but phosphated (black). The heads of self-tapping screws and dowel-nails still have to be repaired, and in the apartment there is no rain or frost.

To make cheap repairs, you first need to know what and how to do, how the apartment should look after renovation. Do not be lazy to confer with the whole family several times, see more pictures of ready-made apartments. Design is not something incomprehensibly sublime; artistic taste is endowed with most people. The professionalism of a designer in most cases comes down to understanding the client's taste and guessing what he wants. And you, since you are doing for yourself, you need to understand what you want. Up to 50% of the costs for self-repairs arise due to the fact that they start at random and then correct and redo along the way.

And, finally, carrying out the work in the correct sequence contributes to the savings on repairs: we start from a distance from the front door, and in the course of work we gradually approach it. The living room, bedroom and nursery can be renovated in any order. Then comes the turn of the kitchen. We make the hallway the penultimate one, and complete the renovation with a bathroom. Savings are obtained on the amount of construction waste (and, after all, half of it is waste of materials for which it was paid) and on the alteration of the soiled and beaten with unreasonable organization of work.

Guided by the above, you can make a comprehensive renovation of an apartment with an original design, spending little more than a cosmetic repair.