DIY flying fairy repair

What could be the reasons that the toy The flying fairy brokeand how to fix them?

They write that a spring often flies inside, and it is not difficult to put it in place by disassembling the doll. I also met a description that it will fly even if you remove one of the pairs of wings. It is unlikely that you can cope with the rest of the breakdowns on your own. If the warranty has expired or was not there, it is unlikely that the fairy can be returned.

If it broke not for your reason, then the best option is to return it to where you bought it, but this will be very problematic. They break very quickly, since they have very weak gears inside and, having taken off several times, the fairy may no longer take off. Perhaps this video will help you cope with this problem.

Is registered: 20.03.
Posts: 758

Is registered: 24.08.2009
Posts: 1449
Location: Okskaya d1.korp1

Is registered: 20.03.
Posts: 758

Is registered: 26.09.
Posts: 125

Is registered: 24.08.2009
Posts: 1449
Location: Okskaya d1.korp1

Is registered: 18.10.
Posts: 738
Location: Okskaya 1-1

Is registered: 05.04.2007
Posts: 3945
Location: Vasilstan 5-1

Is registered: 18.11.
Posts: 3869

Is registered: 15.04.2006
Posts: 3969
Location: office 14

Is registered: 30.01.2009
Posts: 8016

Is registered: 15.02.
Posts: 1467
Location: Okskaya 3-2

Is registered: 20.03.
Posts: 758

Is registered: 27.03.
Posts: 5261
Location: Moscow

Some of my comrades, working exclusively via the Internet, refused to refund money for air tickets, which I decided to refuse. The issue price was 82,000 rubles.
I went to court. Bottom line: 190,000 rubles were collected from them - in addition to the principal debt, about 40,000 notary expenses, and the rest - a forfeit and a fine. One of these days, I hope, money will come from the bank.

In disputes about consumer protection, there are very heavy penalties against the seller, so do not be afraid to butt with them.

Is registered: 30.01.2009
Posts: 8016

Uff. I didn’t expect so many people to respond! Now in order

I immediately put the battery on charge for the night, now it has Uхх = 4.24 V, under a load of 4.22 V. When the USB cable is connected, the voltage rises to 4.26 V

I looked under a magnifying glass, the output is soldered, and in general, the soldering is good. At the expense of experience - I used to be, but now I have forgotten everything, I have not studied for a long time. Now the need has forced) The transistor is soldered, checked. I used this method https://my.housecope.com/wp-content/uploads/ext/2200/article/kmop-transistor.php C-I resistance in both directions 7-8 kOhm. Breakdown, I suppose? How can you replace it?

I don’t know about the cost, but the day before yesterday I saw such a “fairy” on the Mitinsk radio market.

_________________
The rescue of drowning people is the work of the drowning themselves.

Faced the need to repair a similar toy, but for boys. Externally made in the form of a spaceship. The toy board and base are similar to fairy boards.

My 4 year old son figured out with the toy very quickly, she began to blink lamps and refuse to fly. As a humanist teapot, at first he sinned on the motor or transistors in the motor control circuit. The transistors have replaced the benefit, they are penny, the motor checked, it works - the toy does not fly. Then he turned his attention to the base. The command to start the motor is given by the base, issuing a sequence of signals through the IR LED. I looked at the LED, through the phone camera - it does not work. Replaced the transistor in the LED control circuit, did not work. Replaced the LED by uprooting it from an unnecessary remote control. And it all worked.

I can give you a couple more practical tips on the toy. Wings broken in half can be glued with tape and they perfectly hold the toy in the air.
The broken wing mount can be glued with any cyanoacrylate second glue.
1. Lubricate the place of breakage with glue.
2. Fold and fix the debris, for example, on a piece of plasticine (because plastic does not grasp the glue nifiga).
3. We smear with glue around the place of the break.
4. Put soda on the glue.

Grips immediately and firmly, + forms a strong crust. The excess can then be removed with a file.

We were presented with this, at first glance, a wonderful flying fairy daughter, 5 years old. The daughter was delighted and jumped with joy from such a gift.

The bright, beautiful Fairy is a plastic doll with two main wings, three additional wings and a propeller. The fairy is standing on a musical stand.
The fairy itself has a bright multi-colored backlight.
The fairy is launched by pressing a button on the stand. She begins to rotate her wings very quickly and takes off upward from the stand, somewhat reminiscent of a helicopter flight.

In theory, the fairy is equipped with a touch sensor, which, when the fairy approaches the floor or other objects, controls the fairy's flight and should not let her fall, but rather raise her back into the air. So, for example, you can substitute your palm under a flying fairy and it will not have to fall on it.

We unpacked it carefully, read the instructions, inserted 6 batteries, charged the fairy and. sent on the first flight.

The children's impression was mixed.
Firstly, the youngest child is 2.5 years old, she was frightened when she buzzed and flew into the air. The eldest daughter watched with interest, but she herself was afraid to control her.

Secondly, the very touch sensor that corrects the fairy's flight is either positioned incorrectly or working incorrectly. In any case, when we put our hand under it, instead of pushing off the hand and flying up, it began to dive abruptly somewhere to the side and, accordingly, fell to the floor or hit against nearby objects.

And after the third flight, and her next unsuccessful landing, one wing of her two main wings broke off. And without him, she no longer took off. On this, the joy of the gift ended and some frustration and grief in the children began.

The husband carefully examined it, it turned out that both the wing itself and the bracket on which it was attached were made of thin plastic. You can't glue it back, so the contact surface is only a couple of millimeters.

So it turned out that she flew with us for a very short time. And I had to put it on the shelf until better times.

In addition, we noticed that a lot of small cracks appeared on the three additional wings, which in no way correlated with what the manufacturer wrote on the box: Material - high quality plastic. I think that this is not so, otherwise the doll would not have broken on the very first day.

After some time, we still managed to fix it.
The broken wing was taken apart and a new metal rod was put in place of the broken plastic bracket. But after such a reconstruction, one wing turned out to be a little heavier than the second wing and the fairy outweighed it greatly during flight and it flew sideways. And the touch sensor did not work from the very beginning and did not work afterwards.

As a result, after an unsuccessful landing, the fairy's wing broke off again with a new bracket.
But my husband again invented and made some kind of mechanism that holds the wing in the desired position, but this time from soft plastic.

Now, of course, our fairy flies, either from the stand or letting go (holding by the head), but it flies only in this way: it flies up a little and then immediately starts to go down, and since the touch sensor does not work, it falls on the floor if you do not catch it by the head in time and again launch it towards the ceiling.

Children, of course, like it anyway and bring joy. Its charge is not enough for a long time, for about 10 minutes, then we put it on charge again. Charges for 20-25 minutes. When it is charged, a red light comes on on it. The cracks in the wings have become even larger and already solid.

Here is such a toy.
In the end, a short summary. The toy is not cheap. But not durable. Very fragile. Poor quality plastic and non-functional touch sensor. Therefore, despite its beauty, originality and the gift of joy to children, I do not recommend buying it. In addition, small children (under 3 years old) will definitely be afraid of her.

You can BUY A QUALITY TOY THE FLYING FAIRY WITH A 50% DISCOUNT here -
https://my.housecope.com/wp-content/uploads/ext/3184/feyan.

Flying Fairy Master Alexei will give you a couple of tips on how to repair a Flying Fairy with your own hands. It happens, the Fairy does not work, and you need to disassemble the toy to make repairs.

To make your Flying Fairy work for a long time and stably - order a quality toy for your child on this website -
https://my.housecope.com/wp-content/uploads/ext/3184/feyan.

Flying Fairy, Flying Fairy Flying Fairy, Fairy Doll, Flying Fairy Doll Reviews, Flying Fairy Toy, Flying Fairy Toy, Flying Fairy Repair, Flying Fairy Repair

Thank you for your purchase!

For the correct and effective use of the flying fairy, we recommend that you first read the instructions for use and save it in case of malfunction and damage to the doll.

• Fairy - 3.7V, 150 mAh. Radio transmitter 1.5V

• When fully charged, it can float in the air for 7-9 minutes

1. Read the instructions before use. Launch the toy in accordance with the specified rules.

2. Keep small parts out of the reach of children.

3. Do not place the platform with batteries near heaters or sources of fire.

4. When launching several flying fairies at once, the distance between them should be at least 1-2 m.

5. Do not disassemble the toy yourself, as this may cause malfunction.

6. During the flight, the Fairy must be in the induction zone of the electromagnetic field.

7. Do not leave children unattended with a toy.

Transmitter - transmitter (stand)

USB (Optional) - cord for recharging

1. Wipe the doll with a damp cloth after use.

2.Do not expose the device to direct sunlight.

3.Do not immerse the flying fairy in water to avoid damaging the electronic components of the device.

4. When storing, disconnect the charger (on the stand) and the start button on the toy itself.

5.Remove the batteries from the charger if you are not using the toy for a long time.

6. When using alkaline batteries (for the charger), the flying fairy gains the highest possible height.

7. Periodically check the plug and other parts of the device for faults. If there is damage, disconnect the device from the mains and contact a specialist for assistance.

8. The device is made of plastic and metal and contains electronic components.Do not immerse the product in water or use it for a long time in rooms with high humidity.

1.Unscrew the stand cover with a screwdriver counterclockwise (see image 1).

2.Remove the cover and insert 6 AA batteries into the charger, observing the polarity as indicated in the battery compartment (see image 2).

3.Close the stand cover and screw it tightly clockwise with a screwdriver (see image 3).

1. Make sure the Start button on the toy is disabled during recharging (see image 4).

2. Turn on the transmitter on the cradle and connect the charging plug to the toy. (see image 5).

3. When the device is charging, the green indicator will light up. The indicator will turn off after fully charged (at least 50 minutes).

1.If the device is not fully charged, or the batteries are not in the battery compartment, - DO NOT connect the toy to the stand using the charging cable.

2. Do not connect the charging cord to the flying fairy for a long time, if the toy is fully charged

Disconnect the Flying Fairy, connect the USB cable to the toy, then connect the cable to a computer or other charger. The charging indicator will turn red when the battery is fully charged. Charge for at least 25 minutes.

1. Enclosed spaces with moderate air conditioning. When flying a fairy, do not allow direct air flow from air conditioning systems.

2. It is recommended to use the toy in spacious rooms 3х5х3 m.

3.Safe area: It is recommended to run the fairy in a windless room, away from the fan, table lamp and air conditioner. When playing with a fairy, clear the space of objects that interfere with the flight of the flying fairy. Do not bring the fairy propeller to your face.

1. With a weak electrical charge of the transmitter, the control distance of the device decreases.

2. The fairy may not take off or gain insufficient altitude when the toy is low on charge.

3. If the wings and other parts of the fairy are damaged or deformed, the flight path of the toy is disrupted. Stop using.

(If the fairy propeller is damaged, discontinue use immediately as it may cause malfunction or hazardous situations.)

Power switch - Power switch

Balance Bar - Stabilizer

Main Blade - Main wing

1. Place the fairy on the stand (charger). Set the ON / OFF switch on the fairy and charger to ON position. Press the button on the charger and the fairy will take off.

When launched, the fairy wings will slowly spin. Having typed the required rotation speed, the fairy will take off.

Having gained a certain height, the fairy will descend. At this point, bring your hand to the base of the fairy so that your hand is between the fairy and the stand. The fairy will fly up again.

2. Set the ON / OFF switch on the fairy to ON (see image 4) and hold the fairy by the base. With your other hand, press the button on the stand. The fairy wings will start spinning, release the toy and it will take off.

1. Observe the polarity when installing or replacing batteries.

2.Use only rechargeable batteries.

3. Rechargeable batteries should only be charged under adult supervision.

4. Do not mix old and new batteries or batteries of different types.

5. It is recommended to replace the batteries in a timely manner.

6.Avoid short-circuiting power supplies and do not immerse batteries in water.

7. Remove the batteries if the charger is not used for a long time.

This manual contains important information about the product. Retain instructions in case of malfunction of the toy.

BUY A QUALITY TOY THE FLYING FAIRY WITH A 50% DISCOUNT here - https://my.housecope.com/wp-content/uploads/ext/3184/feyanew.php

Flying Fairy Master Alexei will give you a couple of tips on how to repair a Flying Fairy with your own hands. It happens, the Fairy does not work, and you need to disassemble the toy to make repairs.

To make your Flying Fairy work long and stable - order a quality toy for your child on this site - https://my.housecope.com/wp-content/uploads/ext/3184/feyanew.php

Flying Fairy, Flying Fairy Flying Fairy, Fairy Doll, Flying Fairy Doll Reviews, Flying Fairy Toy, Flying Fairy Toy, Flying Fairy Repair, Flying Fairy Repair

Lovely fairytale fairies fluttering on flowers are the favorite characters of almost all girls. They like popular fairy tales and cartoons so much that little ones dress up for masquerades in fairy costumes and even ask their parents how to become a fairy. And, of course, they beg for a fairy toy.

Flying Fairies are a real hit. These are dolls with a built-in motor and propellers (stylized as a fairy outfit). There are also motion sensors that allow the fairy to flutter over any surface (for example, over the palm) at a height of 5-10 cm. Thus, the movement of the original flying fairy can be controlled! Raise your palm higher - the fairy will also fly higher. There is also a "free flight" mode, in which this wonderful toy will flutter through the air no worse than fairies from famous cartoons and fairy tales.

The toy is designed for children from 5 years old, but it can please even a younger child (the fairy must be "under the control" of the parents, of course). This amazing flying fairy will be a great favorite toy for your child.

Set:
- Toy "Flying Fairy";
- USB cable for charging the fairy;
- Charger (powered by 6 AAA batteries, not included);

You can buy a Flying Fairy toy in Saratov by contacting us in any way convenient for you - we will bring the goods directly to your house within 24 hours and completely free of charge! If you want to order a Flying Fairy toy. but you are in another city, then we will send you the goods by mail.

Did you have a question or something remained unclear? Use the feedback form or call our manager by phone +7 927 152 97 22, we will always be happy to help you!

TROUBLESHOOTING:
What if the Flying Fairy is flying too high?
1. Power off and back on Flying Fairy and charger.
2. If this does not help, turn off Flying Fairy... then turn it on and perform a floor launch.

What if the Flying Fairy hits the ceiling?
1. Press the LAUNCH button once to Flying Fairy began to descend slowly. Press the LAUNCH button twice to Flying Fairy stopped immediately.
2. Turn off Flying Fairy and turn it back on.

What if Flying Fairy won't charge?
1. Make sure the batteries in the charger are inserted correctly. Try to use only new batteries. If the batteries are running low, the indicator on the charger will flash green.
2. Flying Fairy it will fly better if it is fully charged. To fully charge Flying Fairy... 30 minutes is enough.

What if the Flying Fairy does not rise or flies unevenly?
1. Make sure that Flying Fairy fully charged.
2. Make sure the wings Flying Fairy rotate freely.
3. Make sure that Flying Fairy stands flat on the stand and that the pin on which it is mounted is not tilted.

What if the Flying Fairy hits the walls?
1. In this case Flying Fairy may fall to the floor. To start the toy again, take it by the legs near the shoes, make sure the wings Flying Fairy not damaged and rotate freely, then start.

What if the wings fell off?
1. Pass the hook on the skirt into the upper wing cylinder.
2. Gently fold the wing and thread the hook on the wing into the cylinder on the skirt.

How to charge the Flying Fairy?
1. Turn the charger ON.
2. Make sure Flying Fairy is in the OFF position. The switch is on the skirt.
3. Plug the charging cord into the skirt Flying Fairy (in a special entrance). but myself Flying Fairy place on the cradle / charger.

How long does it take to charge the Flying Fairy?
30 minutes.

How do I know the Flying Fairy is charging?
When Flying Fairy charging, the indicator flashes red.

Where can I launch the Flying Fairy?
1. Flying Fairy not intended for outdoor play. It is recommended to play in a spacious room away from objects that interfere with your flight Flying Fairy.
2. Don't run Flying Fairy near light sources, infrared devices and fans, because they can interfere with management Flying Fairy.
3. ATTENTION... Never run Flying Fairy next to the face. Keep your fingers, hair, eyes, and other body parts away from the blades.

How to launch Flying Fairy?
1. Disconnect the charging cord from Flying Fairy.
2. Put the switch on the skirt Flying Fairy and on the charger to the ON position. The indicator on the charger will turn red and on the skirt Flying Fairy the red light will flash.
3. Take Flying Fairy by the legs (closer to the shoes) and hold it vertically up.
4. Press the start button on the charger to Flying Fairy took off.

How can I stop the Flying Fairy?
1. Press the large start button once to Flying Fairy began to descend slowly.
2. Press the large start button twice to Flying Fairy stopped immediately.

How long can Flying Fairy fly on a single charge?
Usually Flying Fairy flies 5 - 6 minutes, sometimes longer.

Where / how should the Flying Fairy be stored?
After playing, slide the ON / OFF SWITCH on the CHARGER and on the skirt Flying Fairy to the OFF position. Always put Flying Fairy on the stand. Remove batteries if CHARGER is not used for a long time.

MANAGE SKILLED AND HAPPY MAGIC 🙂

1) Remove the fairy from the package. Unscrew the 2 plastic screws holding the stand to the inner box, release the fairy from the fasteners, the USB cable for charging the fairy battery is at the bottom of the package.

2) Place the batteries in the stand. Unscrew 1 bolt at the bottom of the stand, open the battery compartment and install 6 good AA size AA batteries. A Phillips screwdriver is required, the compartment cover must be pry off with a fingernail or a thin sharp object.

3) Charge the fairy battery with the USB cable. The fairy must be turned off - the red LED in the fairy body must not be on or blinking! Connect the USB cable to the fairy, into the special connector on the bottom of the doll's skirt. Connect the other end of the standard USB cable to your source. You can charge both from the stand (from batteries!), For this there is a USB connector on the back, and from any device with a USB output with power supply - a laptop, computer, mains charger.
When charging is complete from the cradle, the green LED on the cradle will turn on. If you charge from another source, then there will be no indication of whether charging is complete or not, so just keep track of the time. A full charge takes only 30 minutes. No need to charge for 12 hours. )

4) Turn on the fairy. There is a switch slider on the bottom edge of the doll's skirt. The red LED inside the fairy body should flash.

5) Turn on the stand. There is a switch on the back next to the USB connector. The red LED on the front of the stand will turn on.

6) Place the fairy on the stand. There is a socket with a steel pin in the center of the stand - place the fairy feet on this pin. Make sure the fairy comes out of the nest freely! Everything is ready to fly!

7) Let's start! Press the start button on the front of the stand and enjoy the magic of flying! The flight time of the fairy after the battery is fully charged is from 5 to 8 minutes.

8) We control the flight. The fairy flies herself. There is no radio remote control and it is not needed. The fairy has infrared sensors that tell her how far below the surface is. If the surface is close, the fairy takes off, if it is far away, it descends. By substituting your hand, you can control the flight of the fairy, by changing the inclination of the palms, you can direct the fairy in the desired direction. You can blow on her and she will fly wherever you want. Or you can let it fly free and it will fly around the room on its own until the battery runs out.

9) We finish. Press the start button on the front of the stand again. Or just pick up a fairy whose battery is dead or who automatically turned off after a fall.

10) We park. Turn off the stand and turn off the fairy to save battery and battery power.

11) We teach the child! If your child has not yet played with such a toy with friends, be sure to teach her how to use a fairy, demonstrate all the stages of working with a toy - how to charge, how to activate, how to start and how to stop, how to completely turn it off for storage. Consider the helpful advice from the previous paragraph!

12) We rest and rejoice together with the child! This is a mandatory item. )

We are not currently selling this toy.This article was left on our site as it is popular with those who have already bought such a toy or are planning to do so. You can buy this toy from other online stores.

Look at other products in the catalog of our store.

Thank you for purchasing our toy, in order to make it easier for you and to control it, we recommend that you carefully study this flying fairy instruction. Retain this manual at the link above for future reference.

1. When the fairy is flying, it is forbidden to touch the rotating propeller.

2. Do not put your hands close to the petals of the toy in flight.

3. During use, the toy should be directed away from children.

4. Our product is highly resistant to drops.

5. Full battery flight is # 8212; 8-10 minutes.

6. Flying Fairy has 3.7V lithium battery, remote control, 6 pcs batteries. 1,5V type AA finger-type.

1. Before using, read this manual and follow its directions.
2. Do not allow small particles to fall on the toy in flight to avoid accident.
3. Avoid contact with high temperature.
4. Remember that the flight of the toy should be at a distance of 1-2 meters from people. Avoid planting fairies on people.
5. Do not disassemble this device. This could lead to damage.
6. You must control the toy while flying.
7. Adults are obliged to watch their children play with a toy.

1. Use a damp cloth.
2. Avoid direct sunlight.
3. Avoid getting water inside the toy, otherwise the electronic components will be damaged.
4. When the toy is not in use, the control panel and power supply must be covered.
5. When the device is not used for a long time, the batteries should be removed from the power supply.
6. We advise you to use new alkaline batteries in the power supply for a good flying fairy effect.
7. Check the plug and other accessories regularly if you find damaged parts # 8212; don't use them.
8. This product is made of plastic with electronic components. Do not immerse it in hot and cold water or chemical environment.

• Unscrew the battery compartment cover using a screwdriver.
• Install six batteries into the power supply.
• Install the battery cover, tighten the screw clockwise.

1. When charging, the switch must be in the OFF position.
2. Take the USB plug into the power supply.
3. Insert the power switch into the USB socket.
4. When charging is in progress, the indicator is green. After charging, when the indicator turns off, disconnect the USB. Charging time # 8212; 25 minutes. The flight time is 8-10 minutes.

5. Connect the flying fairy to the USB port of the computer. When is charged # 8212; Reach USB, the charging indicator will light up red, the charging time is 25 minutes, the flight of the flying fairy is about 8 minutes.

• Do not install low-quality or low-quality batteries.
• During a long flight, the battery may run out.

1. Closed room, windless. Do not turn on the air conditioner when the toy is flying.
2. Use the fairy in empty space without interference. It is assumed that the area should be more than 3 m. In width, 5 m. In length and 3 m. In height.
3.A safe place, no air conditioner, no table lamp or other items that could interfere with the flight of the toy.
4. Do not use in direct sunlight, it may affect the flight of the toy.

# 171; Flying Fairy # 187; the first doll that can fly.