Do-it-yourself portech washer repair

In detail: do-it-yourself repair of a portech washer from a real master for the site my.housecope.com.

Pressure washers require regular maintenance.

For all models, except for the lowest class of household systems, the manufacturer provides a schedule for checking and replacing various elements. In general, the maintenance of a pressure washer can be broken down into several parts:

Maintenance of the plunger or crank pump.
Maintenance of a powered electric or gasoline engine.
Maintenance of the AED control system and installed control sensors.
Maintenance of the heating or vaporization system, if any.
Replacing consumables and cleaning filters.

Make THAT high pressure apparatus It is not difficult for yourself, but this requires experience in the repair of electrical equipment and mechanical parts. Let's start our examination of TO with the simplest operations.

The first thing every AED owner has to do is to clean the filters. Depending on the model of the device, this may require partial or complete disassembly of the case. In more "advanced" models, the filter can be easily removed from the housing and cleaned by rinsing with water.

All AED models of semi-professional and professional class require regular oil changes in the piston group. The exact replacement time and type of oil are indicated in the service book of the AED, usually 300-500 hours of operation.

To perform an oil change, you must

You can buy professional car wash equipment from us at the lowest prices in Moscow. We offer a full range of car wash essentials, including water purification systems, foam generators, dry cleaning devices and pivoting consoles. Also widely presented are cleaning equipment, scrubber driers and vacuum cleaners, which are successfully used in their work by cleaning companies and large enterprises.

The special pride of our company is its own production of cleaning systems for car wash. "Cleaning plants for a car wash" are selected according to the following parameters: the number of washing stations at your car wash, the power of the high-pressure apparatus, the required degree of wastewater treatment, the need for disinfection. Buying treatment facilities for a car wash from us, you can get them as soon as possible. We organize free delivery even in the suburbs.

The Portekhnika service center has a number of undeniable advantages over competitors. Firstly, the period for troubleshooting equipment is minimal and does not exceed 2 working days. Secondly, the warehouse of Portekhnika spare parts is so large that there will always be the necessary spare parts for your high-pressure apparatus or vacuum cleaner. On request, we will send a detailing of the Portekhnika equipment for self-repair and maintenance.

Delivery of professional equipment Portekhnika in Moscow is carried out by our forces free of charge. When sending to the regions, you need to agree on a transport company with the most convenient location. We work with all leading carriers in the country. We ship Portotecnica car wash equipment every day from 11-00 to 23-00 and even on weekends.

8 (495) 772-09-55
8 (495) 772-91-61
8 (495) 642-54-84

Or log in through one of these services

Comments can be posted only by registered users

Video (click to play).

Washing a car, cleaning a garage or tidying up a summer cottage - all these works are greatly facilitated by a mini-wash.Some models are quite suitable for flushing pipes or concrete mixers. Unattractive and difficult work like cleaning stables or washing agricultural machinery is greatly simplified with the help of this miracle device. The topic of today's publication is the repair of a pressure washer with your own hands, because any technique tends to fail after a particular period of operation.

In order for the mini-sink to serve as long as possible, it is necessary to follow the not very complicated rules for the safe operation of the device specified in the instructions for use:

Remember to ensure that there is sufficient water in the sink. If this rule is neglected, the pump can quickly fail.
Take care not to bend the hose. Otherwise, the device will fail due to the excess of the water level. It will not be superfluous to make sure that you do not step on the hose or run over it with the wheel of the device.
Choose a mini-sink in such a way that it is equipped with a hose reel. In this case, the working life of the device will be much longer.
Remember to drain the water after you have finished using the appliance. Especially if you have operated your sink at low temperatures. Water, turning into ice, will provoke a breakdown of the device.

Important! It is equally important to release pressure from the pump.

Use your mini-sink very carefully. Water is supplied at high pressure, so even small dents may appear on the surface of the car if used carelessly. Therefore, you do not need to bring the device too close to the surface to be treated.

Important! It is strictly forbidden to point the device at people or animals, as this may cause injury.

If you need to take a short break from work, never leave the device turned on.
Make sure that the water used is free of foreign matter.
Change the oil in time.

back to content ↑

These preventive measures will protect the worker and those around him. But this does not mean at all that the sink will work forever. Even with the most careful operation, breakdowns cannot be avoided. Consider the rules for repairing a broken Karcher car wash.

Most often, bearings fail over time, which serve as a support for the washer acting on the valve.

The symptoms of bearing failure are as follows:

Unstable wash operation. In this case, the engine often does not start; a knock is heard inside the device.
It also happens that the engine does not start at all, it gets very hot when turned on.

Do-it-yourself mini-high-pressure washer repair is the following set of manipulations:

Remove the hose from the device together with the “gun”.
Disassemble the case, remove the motor.
Unscrew the 6 self-tapping screws located with an "asterisk" from the motor.
Open the box with the switch, remove the capacitor and power terminals that come from the switch.

Important! Watch carefully so that the details are not lost: it will not be possible to purchase something similar in the store.

Place the sink carefully on a horizontal surface, motor downward.
Prepare a container to drain the oil.
Unscrew the bolts by 13 (there are 4 in total).
Drain the oil into a previously prepared container, put the rubber seal aside.
Unscrew the bolt located in the center, having previously clamped the shaft with a wrench on the other side.
Replace worn bearing.
Assemble the mini-sink in the reverse order, remembering to fill in new oil.

Important! The original oil is difficult to find, so use a suitable analogue.

In addition to bearing failure, the following failures also occur:

Reducing the pressure. The performance of the device decreases, the time for performing washing procedures increases dramatically. The cause of this trouble is damage to the oil seals.Oil seals fail due to prolonged operation of the sink and the presence of impurities in the water. You can solve the problem by replacing the oil seals.
Valve defective. It is hardly possible to make an independent repair, therefore it is much wiser to contact a service center.

back to content ↑

The main condition for a long service life of a mini-sink is prevention. Follow the simple rules for using the device, and you will not have to think about repairing it often.From the author: Hello, friends! The development and implementation of innovative technologies in almost all industries contributes to the emergence of more and more devices, materials, services that greatly facilitate our life and everyday life. The car service sector is also not bypassed; for this, high pressure washers are successfully used. Image - Do-it-yourself portotech car wash repair

Today we will talk not only about the repair technology, but also tell you how to use this device correctly so that it will serve you for a long time and become an indispensable assistant in household chores!

Before proceeding to consider the types of malfunctions and repair methods, it is necessary to outline a number of rules that will significantly increase the service life of your device, as well as avoid elementary breakdowns.The most important thing is to carefully study the operating manual before using the device, it contains basic tips for the careful use of the device. In addition to the standard requirements, the following should be highlighted: Image - Do-it-yourself portotech car wash repair

Decrease in pressure in the apparatus. When this problem occurs, the machine may not be able to take full advantage of all the functions. This is one of the most common problems with these devices. As a result, productivity drops dramatically, leading to a significant increase in cleaning time.Most often, the reason for this is failed oil seals. Their breakdown can be caused both by the duration of their use without replacement, and by the presence of harmful impurities. This problem must be solved immediately and the defective part replaced. After all, this can lead to even more serious problems. Replacing parts is not a complicated operation, so you can do it yourself.Loss of performance can also result in the failure of one of the valves. This breakdown is much more complicated, and it is difficult for a non-specialist to fix it, so in this case it is better to contact a service center for such equipment.So, the sink began to work intermittently and the pressure dropped significantly. How to repair? In this case, we recommend doing the following work.The sequence of disassembling the apparatus is as follows.

We dismantle the casing from the sink disconnected from the network.

We turn the device upside down and remove the plastic pipe, usually it is fixed on three bolts, so here we need a hex wrench.

We remove the valve using pliers.

We inspect, wipe and disassemble for components.

We lubricate the parts and assemble them in reverse order. Do not forget to check the strainer, it is located on the pipe. It may be torn, and therefore contamination ends up on the valve. In this case, it must be replaced.

Read also: DIY Lancer 9 engine repair

In order for your sink to serve you much longer without breakdowns, we advise you to adhere to the following operating rules:

monitor the quality of the water used, do not use dirty water, with impurities;
use filters, this will extend the service life of the device several times;
preventive monthly inspection will help to avoid unexpected breakdowns;
do not disregard the supply voltage and change the oil in a timely manner.

Today on the market of goods for car maintenance there is a wide selection of pressure washers, which differ in their functionality, quality and, of course, cost.Of the variety of manufacturers of such devices, the following, in our opinion, are the most worthy and high-quality ones:

"Champion" - is distinguished by its reliability and ease of use;

"Karcher" - a high-quality and reliable device, a wonderful and well-organized service anywhere in large cities;

"Calm" - compact and reliable sinks;

"Hooter" is a universal high pressure washer that can be successfully used not only for cars, but also for household work;

Interskol - the unit shows good performance and affordability.

In accordance with current legislation, the Administration disclaims any representations and warranties, the provision of which may otherwise be implied, and disclaims responsibility in relation to the Site, the Content and its use.
More details: https://my.housecope.com/wp-content/uploads/ext/1473/info/otkaz.html

Was this article helpful? Tell your friends

Our company offers repair services for equipment of the Portotecnica trademark (Portotekhnika) - warranty and service maintenance, troubleshooting, replacement of consumables, etc. entrust only to real professionals.

The company does not use counterfeit products as spare parts and parts, we only offer original branded parts made in Germany and Italy.

For the repair and maintenance of equipment of the Portekhnika trademark, we have everything you need: qualified personnel with extensive experience, our own workshop, reliable suppliers of spare parts and components.
Therefore, we offer any repair of Portotechnics:

free warranty repair of equipment purchased from us;
post-warranty maintenance - adjustment, flushing, lubrication, cleaning, diagnostics;
free equipment diagnostics when carrying out repairs in our service center;
installation and commissioning of equipment at the customer's facilities;
Service maintenance - a range of services to maintain a constant working condition of your equipment;
Preventive maintenance - preliminary replacement of worn-out units to prevent breakdowns;
Repair - services for the elimination of malfunctions resulting from a breakdown.

Qualified engineers are ready to advise you on any issues related to the purchase, operation, maintenance and repair of equipment.

At your request, we can on-site repair the Portekhnika, install it, test it, teach personnel the correct operation techniques. Repair of Portotechnics by specialists of our company can be carried out on site with a visit of a specialist with the necessary equipment or in our service center using a diagnostic stand.

Today, there are very few equipment that can be called irreplaceable. However, pressure washers may well fall into this category. Tidying up the yard and garage, washing the car or the warehouse - Portotecnica pressure washers are the best suited for all this. In addition to the standard functions, this sink also has such an option as water heating, and can work for a long time without interruption.

Therefore, if such a sink fails, then it becomes very unpleasant news for its owner. In this case, you have to urgently look for a service in which you can conduct a quick repair of high pressure washer Portotecnica in Moscow, and, of course, for a reasonable price.

You should not waste your time on long searches, or try to carry out an independent high pressure washer repair Portotecnica without special skills. Call the company "CMT-service" immediately, and we will quickly relieve you of this problem.

Our service center has been operating for many years, so all our craftsmen have specialized skills and great practical experience. Any repairs, and especially of such delicate equipment as pressure washers, we carry out only after accurate high pressure washer diagnostics Portotecnica, carried out on the most modern equipment. Only after establishing the exact cause of the breakdown, we tell you the cost of the repair, its terms and give guarantees for the work carried out.

Realizing that breakdowns of the pressure washer can occur in the future, our company invites you to conclude an agreement on continuous maintenance of your equipment. Thus, you will be insured against accidental breakdowns and will not waste time on repairs.

If you need a quick, high-quality and reliable repair of a pressure washer, then just call the SMT-Service company!

Tell the portotechnician repairs I need piston gasket kits

In the video I gave the number of the whale, I don't have them for now. We must order.

why is the lucrative foam the place of lather wada enters

I don’t know, I’m in Saratov, I’m 300 km from the border with Kazakhstan.

Detailed and understandable vidos! Thank you! And I have a Chinese sink, I need to replace the repair kit and
assemble the high pressure pump.

silku mjno na rem komplekt?

If the ceramics are intact, then about 2.5 tr. the rubber bands come out.

I order at the service center, if the same device can be sent by mail. The price is about 7 tr. now.

Hello, have the cracked ceramic pistons been replaced, or is it normal to crackle?

Replace cracked ceramics immediately. Otherwise, you will kill the pump drive and it is no longer 7 tr. (like ceramics) worth it.

Hello. I have a question, if I put an engine with the power that I need to the same pump, and the speed is 2 times less. What is the threat? Will the pressure drop strongly with the flow rate?

Thanks for the clarification, I assumed so. now I don’t know what to do with this pump.

Hello. Firstly, the water performance will drop (by half), secondly, the pressure will also decrease, in addition, the filling of the pump drive will be poorly lubricated. The usual revolutions of such sinks are 2800, but there are 1400 motors for them already have a plunger with a large diameter.

Tell me, and with what means they washed the pump to such a clean state. I hope this is not a commercial secret?)))

Pistons or ceramics separately? Ceramics may not be delivered by mail.

In general, the capital is clear. There is an offer for an already otkapitalny avd Ipc elite 2840 1 month warranty. The motor did not run in excellent condition 34 tons.

repairing pressure washer 5.20 here is a link to a cool universal nozzle with different nozzles.

Hello everyone, friends! Today, visiting the master of the house, the wash is calm 108. After my neighbor washed his.

Stihl RE 128 Plus car wash repair.

Do-it-yourself repair of a Stihl RE 163 high pressure washer on a budget, choosing consumables by size. Replacing the spring.

Small repair of a good mini-sink Nilfisk Alto C 110.2-5 X-TRA replacement of the start-stop valve. Inspection of the condition of the pump.

Repair of the Karcher K 5.20 Black mini-sink. Repair of car wash equipment in Saratov +79276252791, +79042440438, +79873321740 st. Olympi.

In this video I will show you how to disassemble a single-lever flag mix on your own, without the help of a plumber.

In this video we will see how to disassemble a pressure washer, if the pressure drops, change the oil in the pump.

ENGINE REPAIR. HOW TO DO THE MAIN REPAIR OF THE ENGINE with your own hands. # OWN_HANDS_Handmade_DIY # Capital.

The winding of the electric motor, high pressure car wash burned out. Nobody undertook to rewind. We decided to do it.

Posted by admin in Repair 04.24.2018 0 142 Views

Cleaning the garage, warehouse, car cleaning, and even your own summer cottage, becomes simple and easy if you purchase special equipment for this - a pressure washer. It is difficult to imagine a car service without a car wash; it can also be used to wash concrete mixers, pipes and other equipment well. Everyone knows very well how convenient pressure washers are for farmers - cleaning of stables and agricultural machinery turns into a quick procedure that even a beginner can master.

The cost of the device varies from 4,000 to 20,000 rubles, depending on the material used in the manufacture of the body and other important parts of the tool. Experts note the excellent quality of brass products, the pistons of which are made of cermet. The correct choice of a pressure washer is not complete without due attention directed to the supplied attachments, it is good if the following components are included:

cutters designed for working with dirt
sandblasting and suction tip
various brushes
corner nozzles.

For a high pressure washer to show a long service life, use a water filter, which protects the inner structure of the hoses from contaminated fluid flow. At the end of each work, unused water must be drained from the equipment and pressure must be relieved.

Such preventive measures will save the equipment from sudden breakdown, but this does not mean at all that a situation will not come when a full repair of the device is required. You can do it yourself, for this you just need to know some of the subtleties of modifying the instance.

The main malfunction that can manifest itself after several years of active operation of the equipment is the bearing, which serves as a support for the swash plate pressing on the valve.

How does a breakdown manifest itself in Karcher:

The pressure washer runs jerkily, the engine regularly refuses to start, and a knock is heard from inside the structure.
The engine does not work at all, hums very much and heats up, literally plows with heat.

In this case, do-it-yourself Karcher sink bearing repair is the following sequence of manipulations:

Remove the hose with the gun.
Carefully disassemble the housing base, take out the electric motor equipped with the cylinder head.
Unscrew 6 self-tapping screws from the electric motor, the caps of which are made in the form of stars.
Open the box where the breaker is located and dispose of the capacitor along with the 2 power terminals coming from the breaker. Put the spring in a secluded place, if you lose it, it will be almost impossible to find the exact same part in stores.
Using a vertical stand, fix it firmly to the floor.
Place the pressure washer on this support with the electric motor pointing downwards.
Unscrew the 4 screws carefully by 13.
Oil will start to spill from the equipment, be careful.
Drain the oil into a container and set aside the rubber seal.
Inspect the condition of the clip with balls.
Armed with a screwdriver that allows you to remove the sprocket head mounts, remove the center bolt. To do this, clamp the shaft on the other side using a gas wrench.
Replace the bearing that is now visible.
The assembly of the equipment is carried out in the reverse order.
Do not forget to add new oil to the inside of the Karcher pressure washer.

Read also: DIY speaker repair

Video instructions for eliminating possible breakdowns of Karcher equipment can be viewed below:

Before determining the method of how to repair the sink with your own hands, you need to determine the exact cause of the breakdown. The list of main faults includes:

Reducing the pressure supply. In this case, there can be no question of any performance, the time of the procedure immediately increases. Repair consists in eliminating damage to the oil seals. Why do the oil seals break? Long-term use and low-quality impurities, substances in the water used spoil and quickly wear out the material. Nothing can be done here, except how to replace the oil seals with your own hands.
One of the valves is defective. It is unlikely that you will be able to do it yourself, repair is most likely impossible without diagnostics with special equipment in the service center.

So that you do not have to face the listed malfunctions in the operation of the Shtil and Champion sink, you should adhere to important rules and requirements:

Pay attention to the quality of the water used, the liquid must not be contaminated.
Repair of the pressure washer is not necessary if you make it a rule to carry out regular preventive maintenance of the product.
Pay attention to proper voltage and change oil on time

Do-it-yourself sink repair is, of course, a useful and developmental business, but it's better to never face this need. The correct choice of a high-quality installation will help to avoid unexpected and premature breakdowns. On this issue, experts give several practical recommendations:

The champion will appeal to those who appreciate the reliability and ease of use of technology.
Calm is an amazingly compact pressure washer, no less durable than the first.
The hooter is universal, it makes it possible to use it in different jobs, however, experienced clients already know that the Chinese hooter often requires do-it-yourself repairs.

Finally, it is worth noting that Interskol is highly productive, but, despite this, it costs moderately, which is very pleasing for people who are strapped for funds or do not want to spend a lot on a pressure washer.

The company does not use counterfeit products as spare parts and parts, we only offer original branded parts made in Germany and Italy.

free warranty repair of equipment purchased from us;
post-warranty maintenance - adjustment, flushing, lubrication, cleaning, diagnostics;
free equipment diagnostics when carrying out repairs in our service center;
installation and commissioning of equipment at the customer's facilities;
Service maintenance - a range of services to maintain a constant working condition of your equipment;
Preventive maintenance - preliminary replacement of worn-out units to prevent breakdowns;
Repair - services for the elimination of malfunctions resulting from a breakdown.

Qualified engineers are ready to advise you on any issues related to the purchase, operation, maintenance and repair of equipment.

It often happens that devices that have become habitual fail. The equipment will have to be handed over for repair, bought a new one, or try to repair it on your own. It may well turn out that self-repair will not cause difficulties.

The low-cost high-pressure car wash (HPH) Elitech 1500 PC has served several seasons, having repeatedly paid for itself. One fine day, my favorite car wash refused to work. The required pressure was absent, and water flowed from the body.

After removing the plastic cover, the problem was identified. Due to the fact that the AED was left to winter at the dacha with water inside, the manometric shut-off valve was damaged. The water inside froze, and the ice damaged the plastic case.

An attempt to fill the crack with glue did not help, a fountain gushed out from under the plastic pusher, water got into the case with a microswitch (photo 1). It was decided to replace the faulty part.

Finding a spare part caused the greatest difficulty. Substitutes available on the Internet were offered for several thousand rubles, which is almost half the price of a new AVD. The market did not help either, the sellers could not even identify the valve. Oddly enough, the necessary spare part was found in an official service center.

The valve article (0901081280) was found on the Internet. It turned out that it is offered complete with a switch and a set of wires (photo 2), and the price is less than 300 rubles. Well, such a renovation is economically justified.

It is most convenient to unscrew the faulty valve with a head by 24 (photo 3, 4, 5). A serviceable part is carefully inserted (photo 6) and screwed into place. The switch body is connected to the valve. It is necessary to press down with effort on the body (photo 7). Without collecting the casing, water is connected to the mini-sink and the operability is checked. Everything, the repair is over.

For reassurance, you can also replace the switch body at the same time, because water got into it. This is also easy to do. First you need to open the black block that contains the wires. You need to unscrew two screws (photo 8 and 9). It is better to remember the position of the wires in the block right away, otherwise you will have to tinker with their reverse laying (photo 10).

Next, the wires are disconnected from the old switch body and new ones are connected. Assembly is carried out upside-down. Now the repair is over for sure.

Andrey Filatov

Any professional equipment works with the specified characteristics for a long time only on condition of a timely, high-quality and rational approach to its maintenance. If the manufacturer recommends replacing any parts or consumables, for example, on a quarterly basis, then you should not squander and delay this moment for five years: saving a penny on spare parts, you can lose much more if the equipment fails due to breakdown ... Even the most advanced equipment of the best manufacturers is not able to work forever with the same productivity: the factor of physical wear of parts and fatigue of materials has not yet been overcome by technical science.

Many of us are so confident in our abilities that we are ready to take on any work on the repair of professional equipment. But before you get down to this business, think, is it worth it?

If you refused to repair yourself, then when choosing a service center, be extremely careful. Perhaps only the lazy one does not offer to repair Karcher today, this is due to the enormous popularity of this brand in Russia. However, you should not trust good equipment to amateurs, newcomers to the service market: the risk is too high.

Contacting "VipTechnika Service" LLC has a number of advantages, both over self-repair and over working with private craftsmen. Several factors determine them:

the presence of a large stock of various original spare parts, as well as the ability, if necessary, to quickly pick up non-original ones;
availability of a full range of necessary special tools and devices;
the availability of conditions for carrying out repair work;
human factor - competent, technically savvy mechanics with many years of positive practical experience in this area.

VipTechnika Service provides services for the maintenance and repair of automatic car washes, professional high-pressure apparatus (AHP), sweeping and scrubber-driers, professional vacuum cleaners.

We are ready to help you with the repair or maintenance of the following equipment:

automatic gantry and tunnel type washers Istobal, Karcher, Aquarama, WashTec, Christ, Tammermatic;
professional high-pressure apparatuses (AHP) Karcher, Delvir, Portotecnica, IPC, Hawk, etc .;
professional vacuum cleaners Karcher, Soteco, Delvir, Ghibli, ELSEA and others;
equipment for applying foam;
water purification and recirculation systems for car washes (cleaning) Vector, Karcher et al.

Combining a high-quality approach to business with a desire to please every client, VipTechnika Service LLC will promptly carry out any repair and maintenance of professional equipment from a vacuum cleaner to a car wash. We value our clients and try to save their time and money.

Video (click to play).

Professional equipment requires professional maintenance and repair. This is an axiom, no need to try to prove it.

Rate the article:

Grade 3.2 who voted: 82