DIY soft chair repair

In detail: DIY repair of an upholstered chair from a real master for the site my.housecope.com.

Time passes, and even good-quality things wear out, lose their former gloss and just break. But do not rush to send a shabby stool to the landfill, it can still become a stylish and functional piece of furniture. Stool restoration will take a lot of time and effort, but the result will exceed all expectations.

Before deciding how to restore an old chair with your own hands, you need to take care of its stability. With prolonged use, the furniture looses: the wood dries up, and the glued spike joints cease to fulfill their function.

A stunning effect can be achieved simply by painting the chairs in different colors.

First, the nodal connection is disassembled. Be careful not to damage it. The thorn is swung and at the same time tapped with a hammer on the knot.
The place of the groove is cleaned of old glue and dust. It is convenient to do this with a chisel or a knife.
Then the spike and socket are evenly and thinly coated with glue with a viscosity of 200.
After the knot is assembled and clamped in clamps. The product must be in the clamping device for at least three hours. The residues of the dispersion are removed with a damp cloth.

Important! If a bolted connection needs to be repaired, place metal or plastic washers under the nuts and tighten the nuts.

If the wooden elements do not adhere to the lugs, you can increase the missing volume with a thin piece of wood. Use casein or skin glue. The adhesive is left pressed in for 8-10 hours in a warm room. Professional craftsmen use a belt tie, which allows you to achieve the desired gluing force.
If a spike breaks, it is better to replace the defective part with a new one. The leg is processed with a hacksaw and the nest is cut out with a chisel to a depth of 50 mm. After that, an insert of the required size is cut out and hammered into it with a hammer.

Video (click to play).

Advice. Use a PVA dispersion, it is non-toxic and not prone to degradation. Epoxy glue "Master" or "EDP" is also suitable.

You can securely fix the legs with wooden scarves. You will also need studs with nuts and washers.

Use sandpaper to get rid of the old coating. It is not necessary to completely remove the entire top, it is important to create a smooth and even surface. Do-it-yourself chair restorations won't feel overwhelming if you use a sander.

Advice. The varnish can be removed with technical acetone. They moisten a napkin with it and wipe the product well. This leaves the natural color of the wood.

The grinding machine will speed up the process of removing the old layer

Since the wood absorbs liquid well enough, the surface must be primed before finishing, this will reduce the consumption of material. A colorless primer is suitable if the wood will only be varnished. Otherwise, choose a white primer. Chairs in white or black look great with contrasting upholstery.

Important! Put on a respirator and gloves before work.

Apply 1-2 coats of primer. When the chair is dry, use a fine-grained sandpaper to run over it.
Now use a wax balm, it will give the surface a special shine. Then polish everything with a brush.
Paint the chair twice. The second layer is applied to a dry surface.
Apply a thin layer of varnish along the grain of the wood.

Advice. Use a water-based paint, it is easy to apply and dries quickly. You will also need a stencil if you want to decorate the chair with an original pattern.

Polishing and painting is best done outdoors.

You will need: a furniture stapler, staples, a screwdriver with attachments, foam rubber 5 cm thick (or two pieces 2-3 cm thick), thick fabric for the backing and upholstery fabric for the top. The filling for the seats can be synthetic winterizer, batting, foam rubber.

Remove the seat and upholstery first. Do not throw away the solid wood base.
Turn the chair over and remove all fasteners holding the seat. Remove the factory brackets.
Pull out the frame with the spring. Free it from any remaining filler.
Cut a rectangle out of thick fabric to fit the seat, cut out the upholstery with a margin. The allowance should be 6-8 cm.
Place a thick fabric backing on the spring. Use a furniture stapler to attach the fabric to the frame.
Lay a layer of filler on top. The optimum seat thickness is 4-5 cm.
Then install the upholstery material, it is most convenient to do this with an assistant. The upholstery can be a special textile material, as well as linen and leather.

The fabric at the corners can be fixed in this way.

First, the chair is painted with two different colors of paints, for example turquoise (1st layer) and white (2nd layer). Then the surface of the back and legs is carefully treated with a fine-grained sandpaper so that the “scuffed” effect appears. The color of the upholstery material should be in harmony with the color of the painted part.
To give the chairs a vintage flair, they are painted in cream, blue, pink. After that, the whole chair or only part of it is decorated with painting. Then separate details are selected with gold paint or a craquelure varnish is applied to the entire surface. Small cracks will create an antique effect.

If you want to recreate the Empire style, choose a milky satin with a floral print. Cover the frame with "gold" paint.
Make a chair cover, it will not only keep the furniture from getting dirty, but also change its design.

Sewing a cover will take a couple of hours of time, and a novice seamstress can also cope with such work

The seat upholstery can be made up of 30 different colored leather belts. They are intertwined with each other according to the "basket" principle and are fixed from below with self-tapping screws.

Seat upholstery with belts

Often there are things in the closet that have not been worn for a long time. An old shirt and frayed jeans will do just fine as raw materials for the upholstery of country chairs. If you find suitable shreds, you need to choose shades and cut out the constituent elements.

Tip: Do not use stretch materials. At first, choose simple, uncomplicated drawing schemes.

Do all the preparatory work first.

Patchwork upholstery - a fashionable touch of a cozy interior

Bright accents will dilute strict monotony

Would you like to renovate your kitchen in an inexpensive way? Decoupage is able to make the most ordinary-looking furniture original and attractive. You will need napkins or fabric with a suitable pattern, leather appliqués are also suitable.

On sale you can find special cards for decoupage

After sandpapering, the cracks are sealed with a putty, the product is primed and covered with a water emulsion.
Then a suitable picture is cut out from a napkin, the surface of the chair is smeared with glue and the drawing is carefully applied. Moving from the center to the edges, smooth it out.
The completely dry surface is varnished.

You can decorate the seat, back or legs in this way. Decoupage is ideal for furniture in a nursery or kitchen

A great solution for transforming an old stool

An unstable chair irritates with its creak and carries a potential danger - at any moment it can collapse under the weight of a person sitting on it. If you have experience, you can strengthen the structure, repaint the base and re-tighten the seat yourself. But if you do not know the secrets of carpentry, it is worth contacting professionals who know how to restore an old chair, and therefore will carry out the repair efficiently and quickly.

Drywall is a fashionable and modern building material.With it, you can bring to life the most daring architectural solutions. For example, various types of arches,.

In modern kitchens, the microwave is one of the simplest but important gadgets. Fast heating and the ability to cook a variety of foods suit everyone. ...

You can equip the kitchen-living room on your own or together with a designer. In the first case, you need to be well versed in finishing materials, to be able to do it correctly.

Old wooden furniture in the house takes on a shabby appearance after many years of use. Frayed or scratched surface, loose connections. Products made of natural wood, after many years of use, retain the quality of individual parts. Inside a dry room, the tree remains for a long time. It is mainly the joints that are destroyed.

Diy chair repair scheme.

Do-it-yourself repair of an old chair allows you to bring a comfortable and beloved piece of furniture back to life and home use.

In addition, it is economically justified - to get a new beautiful piece of furniture with minimal costs.

As a rule, restoration of chairs consists of two steps. The first is to restore the connections, the second is to restore the appearance of the surface. Sometimes repairing an old chair requires replacing some parts. Repair of upholstered chairs is carried out with the replacement (constriction) of the soft fabric part.

Let us consider in more detail the sequence of actions in carrying out the repair of an old chair with our own hands.

Diy folding chair scheme.

chair restoration begins with its disassembly. At the same time, all the parts and joints of the old chair are marked with small notches so that after repair it can be easily assembled. Nuts and screws are unscrewed, screws and bolts are removed. Rusted joints are treated with technical oil or anti-rust. A wet cloth soaked in hot water is placed on the glued joints. After the epoxy glue has soaked, the glue bow is disassembled and the remaining glue is scraped off. The pressed joints are carefully disassembled with a flat screwdriver or chisel, without too much force. You can lightly tap with a hammer on too tight old connections. Controlling the force applied to the furniture is necessary to prevent breakage of parts, after all, they are wooden, not metal. Those connections that have retained the indestructible strength and reliability can not be dismantled. After disassembling the surface, the parts are cleaned of debris and remnants of the old coating;
surface restoration - cleaning the wooden surface of the chair with your own hands from dust and dirt, from drops of paint (if the chair was in the room being repaired), old varnish and a layer of old paint is done first with a rag, then scraped off with a sharp object (for example, a knife) and sanded with sandpaper or grinder. When sanding, use sanding paper, first with a larger grain size, then with a smaller one, to obtain an even and smooth surface. Old paint can be removed with a special solvent;
repair of individual parts. Existing cracks are sealed, primed and left to dry for two days. After drying, another sanding of the surface is performed, finally preparing it for painting.

Do-it-yourself restoration of the joints and joints of the chair is carried out in different ways, their choice depends on the nature of the joints:

Diy chair restoration scheme.

for chairs in which the legs are inserted into the seat with an interference fit (pressed in), the characteristic destruction is loosening of the joints. Driving a small peg into the upper end of the leg will help to increase the density and strength of the connection. For this, a gap is preliminarily sawn at the end. As a result, the size of the butt end expands slightly, and the docking points in the old chair acquire sufficient density.The ends (pins), erased along the outer surface, are restored by winding a bandage soaked in PVA glue. Before final assembly, the recesses in the seat are coated with glue;
chairs that had crossbars in the design for connecting between the legs are loosened not only at the joints of the legs to the seat, but also in the joints of the crossbars to the legs. Most often, you can not disassemble them, but screw in the screws and additionally glue them. For gluing, a narrow hole is drilled through which drops of glue are injected into the joint using a syringe. You can increase the closure density by hammering in small narrow wedges;
when restoring chairs with loose screw connections, a match is inserted into the too wide diameter of the connection (as a wedge) and then the screw is screwed in;
any connections can be securely reinforced with metal corners.

Diagram of the design and dimensions of the chair.

after assembly, the structure is primed and covered with a coating - varnish or paint. Variants of the original cover - decoupage or painting, inscription on chairs or one drawing in parts for two seats;
the new upholstery of the old chair will be made with the fabric you like when the chair is painted and dried. Old fabric and padding are removed completely and without regret. Foam rubber and outer fabric are cut to fit the seat. They are then applied to the seat, aligned and tensioned. Folds are made in the corners, the fabric is tucked up and fastened with paper clips and a special stapler or studs with a wide head;
adding original details, decorations. For example, you can make additional details in the form of deer antlers, donkey ears or a highchair with a soft back in the form of an animal.

An interesting thought: the fastest restoration measure will be the sewing of the cover. Such a measure will allow in a limited time to decorate the interior with a restored piece of furniture.

There are many ideas for the restoration and further use of old chairs. From the parts of your old chair, you can make a garden swing with a back, a flower garden, a hanger, a coat hanger or a dog feeder, all these items can be made in the original design from an old chair with your own hands. But the most correct decision would be to give a second life to the old piece of furniture and create a new chic piece of furniture on its basis.Over time, any furniture loses its original appearance and quality. To solve this problem, it is necessary to carry out restoration work, independently or with the help of specialists. Most often, chairs are restored with their own hands. A master class and a step-by-step photo will help you do it correctly and with the highest quality.Before starting work, it is necessary to assess the condition of the furniture and identify problem areas - damage to the elements of the case, deterioration of the paintwork or the unsuitability of the connecting components. After that, you need to draw up a restoration plan - repair or replacement of parts of the chair, restore the protective layer or improve the fasteners. Usually these works are performed in a complex.Depending on the type of restoration measures, the optimal set of tools and consumables is selected. The minimum package must include the following components:

screwdriver or screwdriver;

furniture stapler;

hammer, jigsaw, sander;

a sheet of plywood, preferably four-layer;

varnish and stain;

set of brushes;

clamps for fastening chair elements;

screws, self-tapping screws.

For a better connection of the parts, it is recommended to purchase a special joiner's glue. Image - DIY upholstered chair repair

You need to be prepared that the entire work on the restoration of the chair can take from one to five days. Such a long period is due to the drying time of the paintwork. If you connect the parts right away, the likelihood of an uneven distribution of the protective layer will increase.

Removal of the casing is performed if it makes it difficult to access the screws. The staples are removed using a slotted screwdriver and pliers. Then it is necessary to dismantle all fasteners. For this, a screwdriver or screwdriver is used. If there are wooden pins in the structure, they are drilled out without damaging the bearing parts.

At this stage, you need to adhere to the following rules:

each part is numbered according to the location on a previously prepared drawing;
inspection for cracks or other mechanical damage;
if necessary, take photographs of the disassembly process.

Then you can start the main part of the repair.

To restore damaged parts, use wood glue. If there is no permanent work on wood, it is recommended to buy a small amount of adhesive. Most often used "PVA-furniture" in aluminum tubes of 50 ml. Average consumption is 100 g / m², price - from 45 rubles.

After applying the composition, you must wait 5-10 minutes.
With the help of clamps, the parts are connected and remain in this state for 1-2 hours.
Excess glue is removed with a rag.
After final drying, the protruding composition is removed with a grinder or fine-grained emery paper.

The adhesive can be used as a filler for deep cracks. It must first be mixed with wood dust. Then the resulting mass is filled with a cleavage.

The most common damage occurs in the seat structure. If they are irreversible, it is necessary to make a new one from plywood in size. Then the foam rubber is cut to the same dimensions and placed on the upper part of the seat.

Your best bet is to buy a new fabric base. Its dimensions should be 7-10 cm larger than the seat size.Then the following actions should be performed:

Foam rubber does not need to be rigidly attached to the glue. It is important that it covers the entire area of the workpiece.
A tapestry (fabric) is laid on a flat surface, foam rubber is placed on top of it, and then a seat.
The edges of the fabric are fixed on the back of the wooden board with a furniture stapler.

Some chair designs have wooden side elements. They are dismantled prior to the upholstery process and then reinstalled.

To prevent the appearance of fungus or mold, as well as to update the appearance, a paint and varnish composition is applied to the surface of the parts. First, each element is treated with a stain, and then, after a day, with varnish. The latter must be applied in 3-4 layers.

Alternatively, you can consider painting the chair. After the final drying of all layers, the structure is assembled. In the process, it is recommended to check with the previously drawn up diagram.

How to make a professional restoration of chairs with your own hands using available tools? It's not difficult at all!

The appearance of furniture can become unpresentable over time. In addition, it sometimes breaks down and requires repair. Restoring a chair that can last for years is not difficult at all. Sometimes you just need to refresh the surface - change the upholstery or make the seat more durable. For restoration, many materials are in the house - a piece of dense fabric, foam rubber, etc. The updated chair, covered with a beautiful varnish, looks no less neat than when purchased.

The appearance of furniture can become unpresentable over time.

A chair that is refurbished at home can be decorated better than it looked before. The restoration requires a minimum of materials and tools. Changing a leaky or worn upholstery is a matter of one hour.

If the chair is antique, then you need to restore it very carefully.

You can independently clean the wooden surface of old furniture and cover it with a transparent or tinted composition, add new elements to the decor. For example, a chair is made with carved legs or a back, reinforcing the seat so that it can be used for its intended purpose for a long time.

For restoration, many materials are in the house - a piece of dense fabric, foam rubber, etc.

The cost of home restoration is minimal. Before buying a new chair, think about whether you can restore the old one and save a lot at the same time. Restoration of antique furniture is especially expensive as it requires great care and exclusive materials. Updating furniture on your own will be much cheaper.

The updated chair, covered with a beautiful varnish, looks no less neat than when purchased.

If the "native" bolts connecting the supporting structure are loosened, then they are strengthened with an additional washer. For greater security, you can add some all-purpose glue to the grooves.

Replace old seagrass and horsehair fillers with foam rubber.

The leaky seat is renewed by replacing the base with sipes and / or completely restoring the upholstery. The worn-out surface is freed from old material. The chair is being prepared for further restoration:

cut a piece of plywood to fit the seat;
foam rubber is glued onto the base (width - 3-4 cm);
fix the plywood around the perimeter;
pull the upholstery fabric onto the finished base;
fix the material with a stapler and staples.

A chair that is refurbished at home can be decorated better than it looked before.

You can completely replace the back with a curly one, if the design allows.

You do not have to run the fabric on the outside of the seat. Then the upholstery is tucked inward around the perimeter. The seat frame will then be visible.

The fabric is selected to be resistant to abrasion and mechanical stress, sufficiently dense.

The restored chair can be additionally decorated - to make the wooden surface lighter or darker, to arrange the back or legs in a different way.

Changing a leaky or worn upholstery is a matter of one hour.

You can use a wide variety of materials when upgrading. With good carpentry skills, the restored chair takes on a personal touch. This takes into account the material - wood species, density, texture.

You can independently clean the wooden surface of old furniture and cover it with a transparent or tinted composition, add new elements to the decor.

The chairs included in the kit must be decorated in the same style.

If the chair is antique, then you need to restore it very carefully. Be sure to give time to dry the applied composition.

For an antique chair, choose a decorative material with embroidery.

For your information... Antique chairs often come with springs in the seat area, so you will need to find the same or similar ones, and remove old, rusted and lost elasticity. Replace old seagrass and horsehair fillers with foam rubber.

The cost of home restoration is minimal.

Round off the edges using a jigsaw and sand the edges with sandpaper.

To restore the chairs, you will need the following:

quick-drying varnish (transparent or tinted);
dye;
upholstery fabric;
foam rubber;
plywood;
sandpaper;
metal washers and bolts (screws);
springs (for a specific type of chair).

Sandpaper is required in order to clean the surface of the furniture from irregularities, chips and cracks in the varnish.

The fabric is selected to be resistant to abrasion and mechanical stress, sufficiently dense. Tapestry, flock, matting, etc. will do. For an antique chair, choose a decorative material with embroidery.

Updating furniture on your own will be much cheaper.

Select a wooden base according to density and texture in advance, cut it to size and use a template to draw up the desired pattern.

Sandpaper is required in order to clean the surface of the furniture from irregularities, chips and cracks in the varnish. The chair (wood structure) must be completely sanded for smooth application of the laminate.

For major repairs, the chair can be disassembled, the broken parts can be replaced with new ones and fastened with bolts or screws.

To upgrade a chair, you need tools:

scissors;
roulette;
a hacksaw for wood (cut off the excess plywood under the seat);
screwdriver;
screwdriver.

For greater security, you can add some all-purpose glue to the grooves.

For major repairs, the chair can be disassembled, the broken parts can be replaced with new ones and fastened with bolts or screws. Seat frames also often require restoration.

Seat frames also often require restoration.

A Viennese chair or whatever looks best in this design.

Important! It is necessary to use wood species that are close in density and texture to make the chair functional and presentable.

The leaky seat is renewed by replacing the base with sipes and / or completely restoring the upholstery.

There are several options for decorating the appearance of furniture. The chair can be refurbished in the following ways:

It is necessary to use wood species that are close in density and texture to make the chair functional and presentable.

As a decor, you can use both the upholstery itself, picking up fabric of interesting colors like a tapestry, and the rest of the furniture, making them carved, curly.

You do not have to run the fabric on the outside of the seat.

The plain seat is decorated with smooth embroidery or appliqué. This must be done before starting the sheathing.

The plain seat is decorated with smooth embroidery or appliqué.

The wooden surface of the support structure and the back are laminated, that is, they are coated with a resistant varnish in several layers. The tone of the coating is selected closer to the natural shade of the wood (light, dark or moderate). A Viennese chair or whatever looks best in this design.

The restored chair can be additionally decorated - to make the wooden surface lighter or darker, or to arrange the back or legs in a different way.

You can completely replace the back with a curly one, if the design allows. Select a wooden base according to density and texture in advance, cut it to size and use a template to draw up the desired pattern. Round off the edges using a jigsaw and sand the edges with sandpaper.

The wooden surface of the support structure and the back are laminated, that is, they are coated with a resistant varnish in several layers.

The chairs included in the kit must be decorated in the same style so that they do not stand out from the general picture - "different-sized" furniture may look good in different rooms, but at a common table, for example, when celebrating a family celebration, it looks casual.

You can use a wide variety of materials when upgrading.

VIDEO: Chair restoration: How to make a chair with your own hands. Master class from Katerina Sanina: design, interior

Many things lose their attractive appearance over time, so they need to be updated. You can put some effort into refurbishing the furniture and giving it an amazing look. Especially often people remodel old chairs. There are many ways to restore them.

To independently renew an old chair, you need to decide on the type of restoration. There are several ways to help you restore outdated furniture. The following methods can be used to renovate wood or chipboard surfaces:

Decoupage - this is the ability to decorate furniture by gluing some motifs or pictures cut from paper on it. To preserve the renewed surface of the object, a special varnish is used that protects the paper from external influences. Decoupage allows you to choose an interesting pattern and transfer it to old furniture, thereby updating the interior.

Adhesive tape or film helps to renovate old furniture without much effort. The self-adhesive decorative foil can be designed to simulate natural stone, wood, leather and ceramics.She is not afraid of water, temperature extremes and direct sunlight. With its help, you can completely transform faded stools.

Art painting Is a way of decorating objects with different colors. There are several types of artistic painting: Khokhloma, Zhostovo, Gzhel and Mezen painting. But restoration with this method requires skill and care.

Craquelure - the technique of creating a visually aged wood. Cracks form on the coating, through which the main tone is visible. To get this result, use a special plaster, varnish or paint.

The technique itself does not require serious preparation and accuracy of application.

Painting - the lightest type of restoration, for which it is only necessary to clean the product well. The paintwork will keep the chair attractive for a long time.

Lamination - A method using decorated paper that is glued to the surface of the chair using a synthetically melted resin.

Veneering - represents the renovation of furniture with a thin layer of wood, which is glued to the surface with a one- or two-component composition. And to give the veneer aesthetics, you can cover it with varnish or wax.

In addition to updating the aesthetic appearance of the chair, sometimes more serious intervention may be required - it may be necessary to replace or repair a broken part of the structure. In some cases, it is enough just to restore the connecting parts, and in others - to completely replace the part.

To restore a wooden or metal highchair, it may be necessary to replace the old upholstery. For this, it is necessary to prepare materials that will help restore the product. Upholstery requires neatness and precision, combined with a mastery of tools.

It is not difficult to disassemble a chair with your own hands, since its design is known to almost everyone. First you need to unscrew the back, and then the legs. And the product is assembled in the reverse order so that all the grooves take their places. If the chair is fixed with glued spikes, the attachment points are moistened with hot water or sprayed with steam from a steam generator.

If there are cracks on the wooden structure, then they are filled with a mixture of glue and sawdust or glued and clamped until they are completely fixed. In case of damage to the spike fasteners, the old plugs are replaced, and the side joints are glued together. To do this, you need to make a small hole, pour glue into it and wait until it dries.

If the old chair is wobbling, then it is necessary to remove the legs from the special grooves and wedge their upper part. Due to this, they increase and hold better in the grooves.

Upgrading a highchair follows the same principle as an adult, but sometimes hinges or a swivel mechanism need to be replaced in it. Usually, children's designs consist of many parts that are designed to secure the position of the child. For greater strength, all connecting places need to be glued.

To disassemble a folding chair, it is enough to remove the axial pins that connect the back and the seat, and then remove the seat. Structures on a metal base are easier to disassemble - you need to unscrew the seat and the soft part of the back.

If the chair seat is installed on a spring block, it must be replaced with new springs. It is not necessary to remove the entire block for this.

After disassembling the structure and restoring damaged parts, it is necessary to remove the old paintwork. After this, the main stage of the restoration begins.

First, a primer is applied to the cleaned surface of the chair, which completely matches the color of the product. After waiting for complete drying, the primer is cleaned with sandpaper to obtain a thin layer of coverage. After that, the product is coated with paint or varnish, wait for it to dry and apply another layer.

Each material is colored in a special way.For example, an anticorrosive agent is first applied to a metal frame, after complete drying, it is covered with a basic color. Transparent varnish is applied in several stages, and if a coloring composition is used, then it is better to resort to enamel for metal.

The wooden frame is first treated with wax, carefully distributing it over all areas. Instead of wax, you can use an oily primer that is applied with a brush. Then the product is covered with several layers of acrylic paint. These recovery steps allow you to quickly and easily renew your stool without the need for special face masks or gloves.

It is highly undesirable to paint plastic chairs, since plastic is prone to bending, and this will lead to cracking and peeling of paint. Therefore, it is a priority for them to sew covers or pillows.

The last stage of renovation consists of creating beautiful upholstery. Having removed the old upholstery, the seat base is cut out of the foam cushion, which is then attached to the surface using glue. For additional fixation, you can use paper clips. Having pulled the fabric well throughout the seat, secure it with furniture clips from below. Depending on personal preference, the fabric may have a bright pattern or no pattern at all.

To remake a seat with springs, first fix the batting, and then a layer of foam rubber sheet. The fabric is attached according to the same principle as with a single layer of foam rubber, but it is pulled with a large emphasis to smooth out the spring relief.

Many people think about which paint is best for painting in order to maintain the effect for a long time. For wooden products, you can use a stain or paint and varnish, and for iron structures, you can use enamel specially designed for metal.

To repair Viennese chairs yourself, you first need to assess their general condition. The amount of damage may vary depending on the operating conditions.

The most important damage that can be assessed at home is instability. This is due to the weakening of the spike joints. To bring the product back to its normal state, it is necessary to increase the size of the spike, put seals on the drawers and replace the power bars. After that, the paintwork is replaced and the seat is restored.

To restore an obsolete structure, you need to prepare the basic materials and tools. To work, you need to get a hammer, furniture stapler, self-tapping screw, paints and varnishes, solvent, brushes, glue, scissors, cloth and sandpaper.

Video (click to play).

The renovation process begins with cleaning all surfaces of the product from dirt and dust. After that, the analysis of the chair begins. First, remove the seat and back, which are usually held in place by screws. Then, step by step, the rest of the details are removed. It is important to check the strength of all joints. If some attachment point does not hold well, then you should not disassemble it.

Rate the article:

Grade 3.2 who voted: 82