In detail: do-it-yourself window blinds repair from a real master for the site my.housecope.com.
Vertical blinds are a simple device consisting of the following parts: cornice, connecting and turning chains, control cord, slats, "shoulders", lower weights. If you wish, you can fix some malfunctions that arise during the use of these curtains with your own hands.
The design of the blinds is simple, however, during operation, several common breakdowns of device parts occur:
breaking the chain connecting the lamellas;
a break in the cord moving the strips along the eaves;
damage to the "shoulders" (plastic parts located in the upper part of the curtain structure and connecting the fabric with the cornice);
breakage of the runners on which the lamellae are attached.
A very significant advantage of the product is the simplicity of the mechanism and the availability of spare parts presented by manufacturers in the markets and in stores, the ability to disassemble it independently.
You can repair the curtains with your own hands, the main thing is to carefully disassemble the product, and then assemble it, adhering to all stages.
Quite often, the integrity of the chain is violated (with careless handling of the product), connecting the lamellas at the bottom. You can buy a new part from a specialist store.
The length of the chain is determined: the width of one strip is measured and the total number of elements is calculated;
The defective part is replaced with a new one.
It is enough to insert the ball into the groove on the lower plastic strip of the lamella
Such a gap does not happen often (as a rule, as a result of sudden movements). The main requirement for this type of DIY repair is that the runners should be open.
Video (click to play).
The length of the lamellas is measured to determine the required parameter of the new chain;
The blinds must be disassembled - remove the side cover on the cornice and take out the plastic gear;
Removing the gear
The damaged chain is replaced with a new one;
The gear is put in place and the side cover is put on the cornice.
This element in the design of curtains is quite difficult to spoil. A common phenomenon is a decrease in the quality of the cord and, as a result, a part jumping out of the control mechanism.
The parameters of the blinds are measured: height and width. Using these figures, the professional at the point of sale will calculate the required length of the new cord. If you wish, you can independently determine the size of the part: the height of the blinds, multiplied by a factor of 1.5, is added to the double width of the cornice;
The ends of the new cord are sequentially passed through the side cover on the cornice and runners;
One end is secured in the fixing device, and the other is pulled through a roller (located in the side cover on the opposite side of the eaves). The cord is returned to the retainer and secured in a loop. A special tool is screwed on from the top.
The failure of this element can be corrected with your own hands quite simply. A new part of the corresponding size (according to the width of the lamella) is purchased at the hardware store.
The broken "shoulder" is carefully removed from the canvas.
The whole piece is inserted into the lamella.
Replacing the lamella hanger
Repairing such a violation requires attention and dexterity. It is necessary to carefully disassemble the mechanism and assemble it in the same sequence.
Eliminate the cord;
Disassemble the control device - unscrew and carefully remove from the cornice;
All sliders are carefully pulled out and released from the cord;
The damaged element is highlighted and, compressing the distance from both sides, pull it out of the broken slider;
A distance is inserted into the new slider until it clicks and fixed in place of the damaged element;
A cord is threaded;
The runners are gently inserted into the cornice;
The control mechanism is installed. In addition to the standard care of the structure (as for any curtains, they require dry cleaning or wiping of fine dirt with wet wipes), it is necessary to follow the basic rules of careful handling of the product and then no repair of vertical blinds is required.
if the lamella traveller is jammed or the strips do not unfold, do not use force. In the absence of an apparent cause of the malfunction, it is better not to disassemble the mechanism with your own hands, but to seek help from specialists;
requirements for operation - slats can be moved along the eaves only in a position perpendicular to the window;
due to the fact that the mechanism is equipped with plastic components, better control - smooth, free movements;
since the fabric of these curtains loses color over time, then when replacing one canvas, it is advisable to update several neighboring ones, so that the shade of the new element does not catch the eye too much.
Do not rush to write off damaged blinds, it is advisable to first consult with professionals. If, nevertheless, the mechanism of your curtains is damaged, you should get rid of such blinds, or disassemble them into parts.
By clicking on the link, you can find out in detail the reasons for the write-off of your lifting device.
It may happen that it will be cheaper to repair the curtains than installing a new product, even if there is damage to various elements.
Blinds are one of the best options for replacing curtains. The design perfectly copes with the penetration of unnecessarily annoying sunlight, has many other positive qualities and, with proper care, can last for many years. But sometimes even such a strong and durable thing breaks. What causes structural breakdowns most often, is it possible to repair the blinds with your own hands and can they be repaired?
Vertical structures are found in houses much less often than horizontal ones, but they are also popular, since they have all the positive properties of blinds. Here are the most common breakdowns.
Break in the connecting chain.
Breaking the chain with which the blinds are regulated.
Breakage of the connection between the lamella and the cornice.
Breakage of runners.
Deformation of the control cord.
You can deal with all these shortcomings on your own, without seeking help from specialists. Below we will tell you exactly how.
Vertical blinds
Do you want something special in your interior? Find out where to buy multi-texture blinds and at what price.
Wooden blinds are also comfortable and suitable for any style. Read our material on the website "Wooden blinds in the interior".
So, if you are thinking of repairing blinds with your own hands, then you need to know how you can fix the breakdowns described above.
If you have a broken chain that holds the lamellas together, then just buy a new one in the store, having previously measured the width of the structure. Then insert the new chain instead of the old one.
If the breakdown is that the control chain is worn out, then you need to open the side cover of the eaves, remove the plastic gear. Remove the broken chain, put a new one on the gear. Put it back in place, close the cover.
A breaking shoulder connecting the slats and the cornice can be repaired in the following way. Measure the lamella size and buy a new item from the store. Remove the broken shoulder and sew a new one onto the thread, or glue it, if provided by the design.
Breakage of sliders is perhaps the most annoying problem that can occur. First, remove the control cord to get to the mechanism without interference.Unscrew the control mechanism and take out the broken slider, pushing back the distances. Set the distance to the new slider, then insert it into the curtain rod, stringing it onto the shaft. Close the mechanism and hang the cord back. Repair of beggars in vertical blinds
Now you know how to fix vertical blinds if one of the troubles described above occurs and deal with the breakdown with your own hands. And what to do if the elements of horizontal blinds have become unusable?
VIDEO Horizontal blinds are the most popular type of construction, but, unfortunately, they also break sometimes. And here is what the most frequent breakdowns of blinds look like.
Broken hooks.
The need to replace the lower clips.
Replacing the control cord.
Blinds lifting mechanism repair.
Replacement of strips.
The reasons why these elements fail are not so important - maybe the service life is expiring, or the structure has been damaged by careless movements. It doesn't matter, it's only important to know how to fix blinds qualitatively and quickly replace the destroyed element.
Horizontal blinds
If you are the owner of a horizontal type of structure, then you need to know how you can repair horizontal blinds with your own hands if one of the breakdowns described above is found.
If such small elements as hooks or clamps are out of order, then you need to buy new missing elements, remove the old ones and fix the new ones.
If the cord is torn, then go to the store for a new one, after having measured your blinds. Remove the old cord, thread the new one in its place, through the cylinder and rollers. Pass the rope through the ladder attachment.
Replacing the lift-and-turn mechanism
VIDEO Now the question of how to repair the blinds does not cause any difficulties for you and, if necessary, you can repair it yourself.
VIDEO How to install horizontal blinds, read the instructions for installing horizontal blinds on a window on our website.
What materials are horizontal blinds made of, read our article "Horizontal blinds from different materials: which are better?"
Roller blinds stand out a bit on this list. Do-it-yourself repair of roller blinds is possible, but if the canvas itself is damaged, then there is nothing left to do but change it completely or, more preferably, buy a new structure.
If the curtain does not fit snugly against the window, then it is necessary to check the installation of the guides and the presence of a load in the lower part of the structure. When the curtain is poorly fixed to the frame, it is best to replace the mount, choosing the one that is most suitable for you. If the control cord breaks, it must be removed and replaced with a new one. Do not tie the torn cord!
Roller blinds repair: creampie replacement
In general, repairing blinds with your own hands does not cause any particular difficulties, and if you have minimal skills, you can deal with breakdowns yourself. You can always find many videos on the Internet that demonstrate the main faults and how to fix them.
VIDEO
Do-it-yourself blinds repair is quite possible at home. To do this, you need to have tool skills and a creative mind. Without these qualities, it is more expedient not to try to fix the problem, but to call an experienced specialist. If you have skillful hands, the remaining components and parts missing for repairing blinds with your own hands can be easily purchased in specialized stores.
Window blinds are a stylish and functional accessory for any interior - be it an office of a reputable company or a living room of a private house. As a convenient and modern alternative to classic curtains, blinds have one drawback: they tend to break from time to time.
In order not to aggravate the situation, before you repair the blinds, you must familiarize yourself with their device. All blinds, depending on their design, are divided into two main types: vertical and horizontal. The main difference between the two designs is the vertical or horizontal arrangement of the adjustable sash panels.
If you are not sure of your technical skills, before you fix the blinds, record the location of parts and accessories in all details on the phone camera. It will also be useful to record each stage of the repair work on the camera - so you will not have any problems during reassembly.
Due to the different structure and order of the device, the malfunctions of these two varieties are also different. Therefore, repairing horizontal blinds will be different from repairing vertical blinds.
Horizontal structures are strong enough, and with careful use they can serve you for ten years without a single breakdown. But with careless use or as a result of poor-quality assembly, certain parts may fail. Let's take a closer look at how to repair horizontal blinds. The list of major faults includes:
The lamellas (sash) do not rotate around their axis.
Break in the cord.
Breakdown of the lifting and slewing mechanism.
Breakage of the horizontal bar.
If the horizontal slats have ceased to rotate around their axis, then the point here is in broken hooks and lower clamps
If the horizontal slats have ceased to rotate around their axis, then the point here is in broken hooks and lower clamps. To replace broken plastic parts, you will have to buy new parts from a specialist store.
In this case, you should pay attention to their size - the purchased parts may differ from their relatives. Therefore, when going to the store, take the broken part with you for a sample.
Replacement is done as follows:
We remove the old hook or retainer.
With one hand we firmly hold the swivel mechanism, preventing it from rotating, and with the other, we insert a new hook into the corresponding hole.
We insert a vertical cane into the installed hook.
The lower retainer is replaced in the same way. After this procedure, the lamellas will begin to rotate around their axis, regulating the flow of light.
If the cord breaks, it should be replaced with a new one. Before buying a new lace, you should remove the dimensions of the blind structure. Knowing these dimensions, the sales assistant will be able to choose the lace length you need. To work you will need scissors, a needle and tweezers. The procedure for replacing the cord will look like this:
We remove the remnants of the old torn cord.
We pass the new cord through the lifting mechanism so that it passes between the iron cylinder and the plastic roller.
We pass the cord into the lower hole of the plastic basket at the point where the ladder is attached. At the same time, the lace is also threaded between the ladder.
We pass the second piece of cord, just like the first. We just pass it into the near punching of the horizontal lamellas.
Next, take a large needle and insert the cord into it. Using a needle, thread the lace through the holes in the lamellas, bypassing the ladder from the right, then the left. Thus, the cord wraps around the ladder in the form of a snake.
At the bottom of the blinds, we pass the needle with the cord through the plug and tie it to a knot. We perform a similar operation with the second cord.
Replacing the lifting and slewing mechanism is a rather difficult task.
If the blinds do not want to work in the desired mode, then perhaps the whole problem is in the breakdown of the lifting and turning mechanism. Before taking on this work, you need to soberly assess your capabilities: can you fix horizontal blinds with your own hands? The fact is that replacing the lifting-and-turning mechanism is a rather difficult task.First of all, you need to remember the location of all structural parts, after which we proceed directly to replacing the damaged mechanism.
First of all, remove the plugs from the sides of the cornice.
We unclench the edges of the cornice and with the help of pliers we pull out the shaft on which the rotation mechanism is fixed.
Disconnect the shaft and swing mechanism.
We take out the cord from the lifting and turning mechanism, having untied its lower ends.
We insert the ends of the lace into the new mechanism, passing them between the roller and the cylinder.
We attach the new swivel mechanism to the shaft and assemble the structure in the reverse order.
This procedure should be carried out strictly in the suggested sequence, since an incorrect procedure can lead to damage.
Replace bent lamellas with new ones
Very often, under mechanical stress, horizontal strips - lamellas - suffer. At the same time, it is almost impossible to repair damaged strips - it is completely inappropriate to straighten them. It is easier to replace the bent lamellas with new ones. This process is carried out as follows:
We squeeze out the plugs from the bottom of the strip, untie and remove the cord.
We remove bent or broken planks, replacing them with new ones.
We pass the cord into the corresponding holes of the new lamellas, the lower bar and the plug.
The ends of the cord are tied in a knot and the plug is inserted back into the bottom bar.
As you can see, it is not so difficult to repair horizontal blinds - you just need to show enough diligence and ingenuity. For information on how to repair horizontal blinds yourself, see this video:
VIDEO Repairing vertical blinds is somewhat different from repairing horizontal structures. The most common failures of this system:
break in the connecting chain;
open control chain;
replacement of the hanger;
break in the cord.
In order to repair vertical blinds, in which the chain connecting the lamellas has broken, the old chain must be removed. Then a whole chain is mounted in its place, to which the vertical petals of the lamellas are attached.
Remove the side cover and disassemble the plastic gear that the chain is wound around
Replacing the control chain will require a fairly large investment of time and effort. First of all, you need to remove the side cover and dismantle the plastic gear on which the chain is wound. After removing a piece of the old chain from the gear, we put a new one on it. Place the gear in its original place and close the side cover.
A common problem with vertical structures is plastic breakage. The most vulnerable part is the shoulder of the lamella. The shoulder is a plastic plate with which the vertical petal is attached to the cornice. It is not difficult to replace it - the shoulder is attached to the fabric lamella by means of an ordinary fishing line or thread. To the plastic lamella, the shoulder is attached to the nibs with a composition. But there is a nuance here - the width of the lamella, which means that the hanger for different blinds can be of different sizes.
Before buying a new spare part, measure the size of the lamella.
The control cord is rarely torn. But even if this misfortune befell you, it is not so difficult to fix it. You need to purchase a new cord of the required length from the store. You can find out by making small measurements. Take the width of the blind and multiply it by two. To the resulting product, we add the height of the structure, multiplied by 1.5. As a result, we get the required length of the cord. How to replace the control mechanism on the blinds, see this video:
VIDEO To install a new lace, we pass its two ends through the side cover of the cornice. Then we pass the lace through the runners to which the slats are attached. Further, one end of the cord is fastened in the latch, and the other is passed through a special roller located at the end opposite from the control mechanism.
This is just a small part of the many possible malfunctions and breakdowns of blinds.But, using simple tools and ingenuity, it is quite possible to fix any malfunction at home. At the same time, do-it-yourself repairs can be in no way inferior to repairs made in a professional workshop.
The design of the blinds is simple and quite reliable; under the correct operating conditions and proper care, they will faithfully serve for a long time. But with a careless attitude, breakdowns still occur, in such situations, diagnostics should be carried out and, if necessary, the blinds should be repaired.
To start repairing blinds, you need to imagine how they work. The designs differ in the type of curtain opening and can be vertical or horizontal. We will also single out separately roller blinds, which have their own distinctive features.
Most often, pets and children disable blinds.
Despite the rather simple appearance, horizontal blinds are made up of a large number of parts. To get them repaired, it is important to know where each part is. It is not difficult to disassemble the structure, but in order not to get confused, it is recommended to consistently lay out all the components for the blinds on the table, and assemble them in the reverse order. Below is a diagram of a typical horizontal design, in fact they all consist of:
the upper eaves - a bar on which the entire structure is suspended - 1;
balance - this is the front cover of the cornice - 2;
lower cornice - a plank at the very bottom of the canvas - 3;
pivot axis - metal pin in the upper box - 4;
left and right strips of mechanisms - 5 and 6;
left and right balance plugs - 7 and 8.
the body of the mechanism into which the rotary axis is inserted - 9;
mechanism wheels - 10;
left and right chain covers - 11 and 12;
support - 13;
caliper adapter - 14;
special insert in the caliper - 15;
caps for the bottom bar - 16;
correctors for glazing beads: left, right and center - 17 and 22;
side covers for the lower cornice - 18;
line clamps located at the bottom from each edge - 19;
control circuit connector - clamp - 20;
clamps for the control circuit - 21;
clips for the ladder from each side - 23;
clips for braid - 24;
control circuits - 25;
braids - 26;
fishing line - 27;
ladders - 28;
screws - 29-33;
C-shaped clips put on the pin near the calipers - 34.
Schematic design of standard horizontal blinds
Horizontal interframe blinds have several differences:
flexible wire - 1;
special bracket - 2;
adapter - 3;
rope and handle retainer - 4 and 5, respectively;
the control handle can be of different lengths - 6;
side covers for the upper cornice - 7.
Interframe blinds are unpretentious during operation, and due to a rather simple design they rarely break
Vertical light protection systems for windows have their own design features, the complete set of blinds is shown in the diagram:
cornice - 1;
rotary rod - 2;
slider - 3;
distance - 4;
lamella holder - 5;
plumb line for lamellas - 6;
plumb line for the control cord - 7;
control mechanism - 8;
C-clip - slider stopper - 9;
an asterisk - 10;
insert - 11;
sleeve - 12;
chain connector - 13;
carriage with a screw, put on a lanyard - 14;
ordinary plastic stopper - 15;
magnetic stopper and corner to it - 16 and 17;
control circuit - 18;
lower connecting chain - 19;
control cord - 20;
a latch for brackets, a bracket and an extension - a holder that is screwed to the surface and the cornice is installed on it - 21, 22, 23;
screws and nuts - fasteners for brackets - 24;
hook for the runner, required for the inclined track - 25;
remote adapter - 26;
vertical groover, bracket and corner for it - 27, 28, 29.
In order for the vertical blinds to look beautiful and even on the window, special weights are mounted from the bottom of the light fabric strips.
Components for vertical blinds, as well as for horizontal ones, can be purchased from manufacturers or in large stores selling these products. When choosing accessories, do not forget that not all spare parts are equilateral, for example, you cannot put the left plug on the right side.
The diagram shows in detail what components the vertical blinds consist of.
Roller blinds are much simpler than horizontal and vertical counterparts:
box - cassette, left and right lids, parts may not be available for inexpensive products - 1 and 11, 12, 13, respectively, some optionally with a hole for the cord;
guides - rails, fastened to the side parts of the frame, the canvas moves along them, fits snugly to the window, may not be provided with a complete set - 2;
lower bar - 3;
mounting profile, with the help of which the blinds are attached - 4;
pipe and shaft, usually with a diameter of 18 or 25 mm - 5 and 6;
control mechanism and punk to it - 7, 8;
pipe adapters - 9;
plug for the bottom bar and for guides - 14 and 15;
chain connector - 16;
retainer - 17;
proofreader - 18;
chain - 19;
fasteners - 20;
pile schlegel - 21;
double-sided tape for gluing guides, textiles and mounting profile - 22, 23, 24;
plastic strip with adhesive strip - 25.
Detailed diagram of the components that make up the roller blinds
Breakdowns usually occur due to debris and dust that have fallen into the grooves of the structure, they impede the movement of the blinds, plastic parts burst from this, cords, fishing lines and chains are torn. In this case, it is required to disassemble the structure and replace the fittings. Also, improper installation and fastening of blinds lead to distortions of the entire system and is one of the main causes of malfunctions.
Careless handling is the cause of damage to the lamellas, as a rule this happens due to the fault of animals and children, they hang on the canvas, the strips bend and break. Replacing damaged parts will help here; during the repair process, it is important to completely repeat the algorithm of the complex interweaving of ladders, cords and fishing line.
Often, the repair of horizontal blinds comes down to replacing the lower clamps and hooks, which are responsible for the rotation of the slats. Before starting work, purchase new accessories for the blinds, be sure to check that they are identical, for example, the clips can be with a smaller or larger diameter. Try to purchase parts from the same production as the blinds themselves.
First dismantle the broken hook, pull it out with pliers to install a new one:
hold the swivel mechanism with your hand to prevent rotation;
insert the hook into the hole;
Insert the other end into the strip.
The old clips are simply unscrewed and new ones are fixed in their place.
Be sure to watch the master class on how to repair a broken control mechanism.
VIDEO
Replacing the cord is the main stage, you can hardly do without it. To change it, remove the curtain from the window, measure the length and width of the blinds, inform the seller about the parameters when buying, he will calculate how many centimeters of rope are needed for repair:
pull out the old rope;
start threading a new one, first put it on the lifting mechanism so that it passes between the roller and the cylinder;
then pass the end from the bottom of the basket at the attachment point of the ladder and at the same time push the rope between the ladder;
pull to the basket, at the same time it should go along the bottom, and in the cells of the ladder;
run the end into the hole in the cornice;
the second rope is pulled according to the same algorithm, but it is threaded into the near punching of the planks;
with a crochet or needle, first on one side, then on the other, pull the rope through all the strips, grabbing the ladder;
insert the ends into the plug and tie a strong knot.
Watch a video with detailed instructions on how to repair blinds with your own hands, which clearly shows how to change the control mechanism and a torn ladder, as well as shorten the curtain.
VIDEO
To repair lamellas, you should:
remove the plug, cut the knots, pull out the rope;
set new levels;
a new rope is threaded, the process is described above;
when the canvas is assembled, tie the ends of the rope into a knot and put on the retainer.
Repair of a torn ladder is performed as follows:
pull the ladder out of the support;
detach the curtain from the eaves, remove the rope;
pull the old ladder over the edge;
install the retainer on the new one;
thread strips into each cell;
then pass the rope according to the instructions above, alternate the jumper of the ladder to the right and left of it;
when you get to the bottom strip, tie a knot and install the clamps.
Watch a helpful video tutorial in which the wizard explains common problems and shows you how to fix them.
VIDEO
Repair of vertical blinds, basically, comes down to replacing the chain:
remove the protective box, if any;
unscrew the cover from the sides of the cornice, pull out the plastic gear that connects the runners with the chain;
put the gear lock in a hanging position, all sliders must be open, otherwise the mechanism will jam;
run the new chain through all the parts;
reassemble the blinds in the reverse order.
If the slider breaks down, repairing vertical blinds is much more difficult than changing gears or a chain:
measure the width of the strips, in accordance with the dimensions, purchase new parts;
open the cornice, remove the control chain;
unscrew the control mechanism from the shaft, remove the runners until it is broken;
put on new ones, be sure to insert until you click;
pull the control chain through all the elements, stringing it onto the shaft;
when we have reached the last detail, we insert the shaft into the control mechanism, screw it to the cornice and assemble the box.
When repairing the blinds, you can remove all the fabric strips and wash them. Often, old curtains no longer suit us: they have lost their color, the wrong design or are heavily dirty, or just want to update the interior, in these situations you can buy new fabric, multi-lamella or plastic slats and hang them on the old cornice.
The next video shows step-by-step instructions on how to assemble the runners on the cornice.
VIDEO
It is better to entrust the repair of wooden blinds, as well as metal roller shutters and sun blinds to specialists. These are expensive and rather heavy products. Of course, with the proper level of preparation and a set of tools, you can disassemble and assemble such structures with your own hands. But it should be understood that these are quite strong, durable and reliable products, they could not simply fail, therefore, first of all, it is important to carry out diagnostics and find out the reason. In the production of external metal blinds, each manufacturer has its own secrets and makes changes to the design, so if you have any problems with the operation of such systems, it is better to immediately contact the professionals.
Do-it-yourself blinds repair is quite possible at home. To do this, you need to have tool skills and a creative mind. Without these qualities, it is more expedient not to try to fix the problem, but to call an experienced specialist. If you have skillful hands, the remaining components and parts missing for repairing blinds with your own hands can be easily purchased in specialized stores.
Window blinds are a stylish and functional accessory for any interior - be it an office of a reputable company or a living room of a private house. As a convenient and modern alternative to classic curtains, blinds have one drawback: they tend to break from time to time.
In order not to aggravate the situation, before you repair the blinds, you must familiarize yourself with their device. All blinds, depending on their design, are divided into two main types: vertical and horizontal. The main difference between the two designs is the vertical or horizontal arrangement of the adjustable sash panels.
If you are not sure of your technical skills, before you fix the blinds, record the location of parts and accessories in all details on the phone camera. It will also be useful to record each stage of the repair work on the camera - so you will not have any problems during reassembly.
Horizontal structures are strong enough, and with careful use they can serve you for ten years without a single breakdown. But with careless use or as a result of poor-quality assembly, certain parts may fail. Let's take a closer look at how to repair horizontal blinds. The list of major faults includes:
The lamellas (sash) do not rotate around their axis.
Break in the cord.
Breakdown of the lifting and slewing mechanism.
Breakage of the horizontal bar.
If the horizontal slats have ceased to rotate around their axis, then the point here is in broken hooks and lower clamps. To replace broken plastic parts, you will have to buy new parts from a specialist store.
In this case, you should pay attention to their size - the purchased parts may differ from their relatives. Therefore, when going to the store, take the broken part with you for a sample.
Replacement is done as follows:
We remove the old hook or retainer.
With one hand we firmly hold the swivel mechanism, preventing it from rotating, and with the other, we insert a new hook into the corresponding hole.
We insert a vertical cane into the installed hook.
The lower retainer is replaced in the same way. After this procedure, the lamellas will begin to rotate around their axis, regulating the flow of light.
We remove the remnants of the old torn cord.
We pass the new cord through the lifting mechanism so that it passes between the iron cylinder and the plastic roller.
We pass the cord into the lower hole of the plastic basket at the point where the ladder is attached. At the same time, the lace is also threaded between the ladder.
We pass the second piece of cord, just like the first. We just pass it into the near punching of the horizontal lamellas.
Next, take a large needle and insert the cord into it. Using a needle, thread the lace through the holes in the lamellas, bypassing the ladder from the right, then the left. Thus, the cord wraps around the ladder in the form of a snake.
At the bottom of the blinds, we pass the needle with the cord through the plug and tie it to a knot. We perform a similar operation with the second cord.
If the blinds do not want to work in the desired mode, then perhaps the whole problem is in the breakdown of the lifting and turning mechanism. Before taking on this work, you need to soberly assess your capabilities: can you fix horizontal blinds with your own hands? The fact is that replacing the lifting-and-turning mechanism is a rather difficult task. First of all, you need to remember the location of all structural parts, after which we proceed directly to replacing the damaged mechanism.
First of all, remove the plugs from the sides of the cornice.
We unclench the edges of the cornice and with the help of pliers we pull out the shaft on which the rotation mechanism is fixed.
Disconnect the shaft and swing mechanism.
We take out the cord from the lifting and turning mechanism, having untied its lower ends.
We insert the ends of the lace into the new mechanism, passing them between the roller and the cylinder.
We attach the new swivel mechanism to the shaft and assemble the structure in the reverse order.
This procedure should be carried out strictly in the suggested sequence, since an incorrect procedure can lead to damage.
Very often, under mechanical stress, horizontal strips - lamellas - suffer. At the same time, it is almost impossible to repair damaged strips - it is completely inappropriate to straighten them. It is easier to replace the bent lamellas with new ones. This process is carried out as follows:
We squeeze out the plugs from the bottom of the strip, untie and remove the cord.
We remove bent or broken planks, replacing them with new ones.
We pass the cord into the corresponding holes of the new lamellas, the lower bar and the plug.
The ends of the cord are tied in a knot and the plug is inserted back into the bottom bar.
As you can see, it is not so difficult to repair horizontal blinds - you just need to show enough diligence and ingenuity. For information on how to repair horizontal blinds yourself, see this video:
VIDEO
break in the connecting chain;
open control chain;
replacement of the hanger;
break in the cord.
In order to repair vertical blinds, in which the chain connecting the lamellas has broken, the old chain must be removed. Then a whole chain is mounted in its place, to which the vertical petals of the lamellas are attached.
Replacing the control chain will require a fairly large investment of time and effort. First of all, you need to remove the side cover and dismantle the plastic gear on which the chain is wound. After removing a piece of the old chain from the gear, we put a new one on it. Place the gear in its original place and close the side cover.
A common problem with vertical structures is plastic breakage. The most vulnerable part is the shoulder of the lamella. The shoulder is a plastic plate with which the vertical petal is attached to the cornice. It is not difficult to replace it - the shoulder is attached to the fabric lamella by means of an ordinary fishing line or thread. To the plastic lamella, the shoulder is attached to the nibs with a composition. But there is a nuance here - the width of the lamella, which means that the hanger for different blinds can be of different sizes.
Before buying a new spare part, measure the size of the lamella.
The control cord is rarely torn. But even if this misfortune befell you, it is not so difficult to fix it. You need to purchase a new cord of the required length from the store. You can find out by making small measurements. Take the width of the blind and multiply it by two. To the resulting product, we add the height of the structure, multiplied by 1.5. As a result, we get the required length of the cord. How to replace the control mechanism on the blinds, see this video:
VIDEO To install a new lace, we pass its two ends through the side cover of the cornice. Then we pass the lace through the runners to which the slats are attached. Further, one end of the cord is fastened in the latch, and the other is passed through a special roller located at the end opposite from the control mechanism.
Video (click to play).
This is just a small part of the many possible malfunctions and breakdowns of blinds. But, using simple tools and ingenuity, it is quite possible to fix any malfunction at home. At the same time, do-it-yourself repairs can be in no way inferior to repairs made in a professional workshop.
Unscrew the lid
Unscrew the lid
