DIY oysters tablet repair

In detail: do-it-yourself oysters tablet repair from a real master for the site my.housecope.com.

Tablet does not turn on - do it yourself tablet repair

Topic of the article - the tablet does not turn on and do-it-yourself tablet repair... The reasons may vary. A number of reasons may be associated with the "iron" filling of the apparatus. Also, the reasons may be hidden in the OS failure. Either way, there are some actions that users can take to fix the problem on their own.

It's important to remember when the tablet was last charged. When fully discharged, sometimes ten minutes of charging is sufficient for the device to turn on. During charging, press the power button with short interruptions for a minute to turn the device back on. Of course, the charger must be in good working order.

If the charging option did not help solve the problem, then it is recommended to carefully examine the tablet for mechanical damage. The presence of chips on the screen or dents on the case may indicate that the device has been dropped. As a result, the reason is obvious. If there is a guarantee, you should go to the service center.

Tablet does not turn on - do it yourself tablet repair

In this case, the reason lies in a software failure. For example, the backlight may turn on, and then the inscription "АNDROID" or a picture of an idle green robot appears. Here the reasons are as follows - incorrect installation of applications and forced termination of system processes. As a result, suffered tablet firmware.

You can restore the device using the Hard-Reset or Hard-Reset program. By the way, the program can be found on the Internet. So, with the help of Hard-Reset, you can reset the factory settings of the tablet. The principle of action in this case for most models, especially Chinese ones, remains unchanged:

Video (click to play).

You need to turn off the tablet.
Now you need to remove the SIM card and micro card.
It is necessary to hold down the volume up button for ten seconds - while the vibration of the tablet is felt.
Using the volume and power buttons, you need to select the "Setting" settings in the menu, and then - "Format System".
Now you need to select "Reset Android".
At this point, the tablet will reboot.

The specified procedure will lead to the fact that the data will be erased. If it's clear how to flash a tablet, then you can repeat the procedure in case of failure the first time. Nuance - sometimes the result can be negative. In this case, it is recommended to think about a complete flashing of the device. On the site you can find information about how to flash Android do it yourself.

There are several reasons why the tablet power button might not respond. However, the device can be turned on. In this case, you can turn on the device when it is completely discharged:

First you need to connect the charger.
You need to simultaneously press the volume down and power buttons.
Using the volume down button, in the “bootloader” menu, select the “powder off device” section.
The option should be selected with the power button.
After turning off the tablet, you need to disconnect the charger.
Now the tablet needs to be connected again - the charge indicator should appear on the screen.

In principle, that's all. If now the tablet does not turn on and does not want to charge, then the charger and power supply should be checked. As for the power button, mechanical damage is also possible. In this case, you should disassemble the device and restore the button (replace, restore paths, eliminate broken contacts, etc.).

Replacement of the touchscreen (sensor) Oysters T72HM 3G (replacement of the oysters t72hm 3g sensor)
Changing the touchscreen on the Oysters T72HM 3G tablet.

To replace you will need:
Phillips screwdriver, pick, long flat blade, tweezers

In this case, it was not necessary to heat up the old touchscreen with a hairdryer before replacing it, it was easily removed without heating with the help of a pick

and tweezers.
Perhaps, in your case, you need to slightly heat it with a hairdryer, because the touchscreen may be glued more strongly than in this

Take your time and everything will work out.

Subscribe to keep abreast of updates, like.

Replace touchscreen (sensor) Oysters T72HM 3G
Disassemble Oysters T72HM 3G

Video Disassembly assembly Oysters T72HM 3G Touchscreen replacement oysters t72hm 3G channel dok19 dok19ti

The page contains a list of articles published on the site on the maintenance and repair of tablets with your own hands. To go to the page with the publication, just click on the photo or "More".

If the tablet does not turn on, what should I do? The tablet may not turn on for one of the following reasons: the battery is discharged, the power adapter is faulty, the software does not work correctly, the Power button, battery and other components are out of order. How to disassemble a tablet and disconnect connectors and flat cables without damaging them. More details.

How to check the performance of the tablet using the mouse. Where to buy a touchscreen. An example of replacing the touchscreen in the MonsterPad tablet. How to check the touchscreen before installing, remove the cracked one, prepare the frame and install a new one. More details.

The display is the most vulnerable part of any gadget. Despite the first-class protection, durable glass, shockproof cover, the display is easily damaged. Most often this happens due to the fault of careless users. The strength of the screen is broken after impact with solid objects. The display matrix does not tolerate contact with water and dust.

The result of this use is a decrease in the technical characteristics of the screen. They can show up in the form of low backlighting, spectral bands, black spots, problems with sensor response. The most unpleasant consequences - the display completely refuses to work. In this case, you can feel the return of the vibration sensor or sound speaker, but there will be no picture on the display.

It is quite easy for owners of equipment to solve this problem. Replacement of the display for the Oasters tablet is carried out at the Remobi service center.

This procedure is performed after complete dismantling and diagnostics of the integrity of the device. After that, the master needs to select an original display with similar characteristics, dimensions, and a connecting cable. When removing the faulty module, precise tools are used to avoid damaging the motherboard and touchscreen. The installation of a new component is carried out by the engineer with extreme care. Having connected the display to the board, the device is assembled in reverse order.

Read also: DIY repair

Trust our service center to replace your Oysters tablet display. We will quickly select the original component, install it, and then send the rehabilitated device by courier to anywhere in the city. You will be pleasantly surprised by our pricing policy, speed of work and professional approach to business.

The other day they brought an Oysters tablet with a diagnosis "Does not charge".

As you probably already understood, this is what we'll talk about, about repairing the Oysters tablet.

Usually, problems with a lack of charge in the tablet are directly related to either the charger itself or the socket.

But in our case, everything is somewhat more interesting. When you repair tablets like Oysters, i.e. The Chinese always need to be prepared for surprises.

So in this case, looking at the microUSB socket, I realized that it, as usual, is not torn off. I even checked it under a microscope, all contacts are in place. I connected the charger, checked the voltage on the board supplied from the microUSB socket, 5 Volt power is supplied successfully.

But whatever the twist, the tablet still does not charge.

And those. it shows a charge indication, the screen lights up telling me the same information, but it refuses to start, tk. discharged to zero.

To begin with, I unsoldered my native battery from the motherboard and connected the test one, and voila! The tablet started up.

Moreover, he also began to charge!

What's the problem? The devil, as usual, this happens is covered in the details of what is happening. The battery itself has a built-in small board that controls the power supply in both directions. It was on it that the control microcircuit thereof failed.

After replacing it, the tablet began to charge again.

Well, in short, it was the Oysters tablet repair.

Is your tablet crashing? Are you making no tricky calculations in your head about paying for a breakdown? You should not rush things and immediately run to the master of electronic equipment repair. Spare parts for tablets in Moscow.

Perhaps your problem is not so global and you can fix it yourself. In fact, making a tablet repair with your own hands is not so difficult, because it all depends on the scale of the breakdown. And in order to find out the cause, it is necessary to conduct a small self-diagnosis. So, here is a list of problems that you can fix without resorting to third-party help:

There are several reasons that you can fix yourself:

It's all about the operating system, you just need to press the power button and do not let go for 15 seconds, or press the RESET hole with a thin object, and then try to turn it on.

Failed charger. Connect the charger to the tablet and try to turn it on, if it does not work, then try again after 10 minutes. Then wiggle the plug at the base of the tablet socket, it should move freely enough, but if the plug does not hold, then you need to change the charger, and this is already part of problem number 2.

In addition to the fact that a power failure can occur due to a breakdown of the charger plug, there are a number of other reasons:

If the tablet works only with the help of a charger, then most likely the reason for the breakdown is charging, because it does not conduct enough power for the tablet to charge, and its power is only enough for the operation of equipment. But before buying a new charger, check the old one on other electronics.

Another possible option is battery breakage. It is likely that the board with part of the power circuit is out of order, so you need to change the battery.

A battery, just like a charger or spare parts for tablets in Moscow, or in your city.

A fairly popular reason for the sudden disappearance of an image is the matrix. Try connecting your tablet to your TV using an HDMI cable. If there is a picture, then it is guaranteed that you need to either change the matrix, or watch the cable connecting the matrix to the motherboard.

If the tablet works properly, but there is no sound, then the reason is probably hidden in the device's settings or in the headset jack.

First, check the settings in the sound menu, then move all the volume sliders to maximum, restart the tablet and check for sound. If there is still no sound, then the reason is most likely in the headset jack. And the connector is designed so that when headphones are connected, it switches the sound from the speakers to the headset. And two contacts in the connector are responsible for this, if they are shorted or broken, then, perhaps, the sound will disappear.

This entry was posted on Friday, February 27th, 2015 at 11:50 and is filled under: MISCELLANEOUS

We are repairing the tablet. Doing Charging.

Replacing the charging connector on the tablet.

Replacement of the touchscreen (touch glass) of the Oysters T72ER 3G tablet. Repair of the micro-USB connector. You can buy a touchscreen at.

Once again: I am not a professional, I repair as much as I can.

Changing the next killed USB party 100pcs USB connectors: https://ali.pub/27w2o4 Tracks used: Cold Fact - Chicola,.

Replacing the charging socket of a Chinese tablet with your own hands using a partner soldering iron

We change the charging connector on the tablet.

During repair, the Oysters tablet does not charge. Our site is masterfox.org Our group is in contact.

When you try to charge, the tablet tries but the battery is not working, it works when you replace the battery. Accumulatively.

Links to the touchscreen: 1. 2. More touchscreens: Double-sided.

The video shows the recovery of the loop on the Oysters t72M 3g tablet. The tablet was disassembled and damaged during disassembly.

We are all accustomed to mobile technologies and it's hard to imagine how we would live without mobile phones, tablets and other familiar gadgets. However, sooner or later they fail. There are many reasons for breakdowns and breakdowns themselves, and they are all different. And now your tablet is broken. In order not to part with it for a few days, giving it to a service center for repairs, there comes a desire to repair it on its own. Where to begin?

You need to start with diagnostics, i.e. understand the cause of the breakdown. There are breakdowns that are visible to the naked eye, such as a broken touchscreen, a broken connector, a wheezing speaker. But determining why the tablet turned off and does not turn on is much more difficult. Here the Internet comes to the rescue, where you can find special diagnostic programs. And now, having identified the cause of the breakdown of the tablet, it was decided to repair it on our own. To do this, we need a minimum set of tools (if you need to disassemble the tablet):

1. A set of magnetic screwdrivers;

3. A blade for disassembling the body;

4. Thin double-sided tape;

5. Video instruction or step-by-step guide with photos for disassembling your tablet.

Let's describe those types of tablet repairs that are quite possible to do at home:

1. Re-flashing the tablet. It is needed if programs close themselves or constantly give errors, the tablet restarts or freezes. Many tablets have a reset button or a combination of buttons by pressing which you can reset all parameters and return to factory settings. If this does not help, you can reflash the tablet through the official website. Z We go to the official website of our device and look for our model. If new firmware is present, it will most often be archived. After downloading the firmware in .zip, .rar, .7zip format, launch a special program for Windows, which will automatically update your device.

Replacing the battery. The battery on the tablet has stopped holding a charge or is not charging correctly, which means it needs to be replaced. The back cover is removed from the tablet, you find out what dimensions the old battery has, you can choose a larger capacity. Remove the battery and install a new one on double-sided tape. Solder the wires: red to red, black to black. That's all, the battery replacement is complete, the main thing to remember is that it is strictly forbidden to close plus and minus.

Replacing the touchscreen. The glass is broken or the sensor stops responding to touch. In order to replace the sensor on the tablet, you need to disassemble the tablet and look at the markings on the touchscreen cable. By marking, you are looking for a new touchscreen (if there is no marking, then by the name of the tablet). Having bought a new touchscreen, disconnect the old one and connect the new one and check the functionality. If the sensor works, disconnect the old touchscreen by warming up with a hairdryer. Use double-sided tape to glue a new one. Collect the tablet.

The rest of the repairs are strongly discouraged at home. Self-repair is advisable only for minor breakdowns. The replacement of parts that are soldered to the device, and not by cables or connectors, should be entrusted to professionals.

The advantage of having a repair done at a service center:

professional equipment for repair;

experience of craftsmen;

guarantee for the work performed;

availability of branded original spare parts.

If you want to save time and not put your device at risk, tablet repairs in Odessa are outsourced to an IT service center.

Press CTRL + D to add the page to the bookmarks.
Press CTRL + D to bookmark the page.

ELEMENTARY. Oysters T72ER 3G tablet battery swell

Repair of the Oysters T7V 3G tablet. Spontaneous shutdown.

Tablet repair Oysters T72 3g. Replacing the charging socket.

We are repairing the tablet. Doing Charging.

Oysters tablet repair in Rezh

The oysters tablet does not turn on, the volume button does not charge, this is the reason.We are here for you! Phone repair.

Oysters T72ER 3G Tablet Repair

The touchscreen glass is broken. Oysters T72HRi 3G tablet. Replacing the touchscreen

Repair of the Oysters T72ER 3G tablet, replacement of the touchscreen (touch glass). Repair of the micro-USB connector.

Replacement of the touchscreen (touch glass) of the Oysters T72ER 3G tablet. Repair of the micro-USB connector. You can buy a touchscreen at.

Replacing the display (screen) on the OYSTERS T72HM 3G tablet (tablet repair) or how to repair the tablet with your own hands using the example of the OYSTERS T72HM 3G tablet - video (Doesn't work, the tablet is broken). This tablet is a complete copy of the Digma 7.77 3G, Explay, and other cheap tablets. The most important thing during the process is not to break the new screen! The video provides an overview, disassembly, replacement of an element (display), diagnostics, tablet assembly. The cost of the repair is 900 rubles. Time spent on disassembly, assembly, installation and diagnostics 25 minutes.

Tablet repair - disassembly Digma Optima E7.1 3G TT7071MG / Repair tablet - disassembly Digma Optima E7.1 3G TT7071MG The sensor can be bought here: Is a child growing up in your family? Naturally, the kid enjoys decorating the flowers on the wallpaper, tearing them off the wall. You have to periodically wash the wall covering, glue the wallpaper. When the child grows up, you can repair the tablet with your own hands oysters, which will return the apartment to its original appearance. Modern materials make it possible to bring to life the most interesting solutions, to completely renovate the home.Life goes by rapidly, one day is similar to another. Do you want variety, a change of scenery? The continuous work schedule provides for constant employment in the service, you have to be at home only in the evenings. An excellent solution would be to repair bicycles in an apartment in Izhevsk, allowing you to bring a new note of pleasure into your life. You can contact a specialized company that offers a turnkey service.How to renovate your apartment or house if there is no time at all? At the moment, the opportunity to contact professionals who are ready to completely revitalize your premises is quite popular. Qualified designers develop projects, companies offer the opportunity to perform turnkey repairs of perov laptops. You do not have to buy materials yourself, hire workers, control the process.Diagnostics and repair of the Oysters T72 tablet is carried out by professional engineers of our service as soon as possible. A guarantee is issued for all types of work. You pay only for the completed repairs.The prices in the table are for repair work, excluding the cost of spare parts.All information provided is for reference only and is not a public offer. Check the terms and the actual cost of repairs with our specialists by phone +7 (495) 363-78-55The Tech-Profi service center is always happy to help in solving problems that have arisen with your tablet. Our engineers carry out repair of tablet computers of any complexity. From replacing the display and touch glass, repairing the charger and SIM holder, to complex electrical repair of the motherboard. Our service technicians will restore the Oysters T72 tablet after flooding or severe mechanical damage at the lowest prices in Moscow.The addresses of our service centers:* Discount is provided for the work of the master. Specify the exact cost by phone.

The tablet fell unsuccessfully to the tiled floor. As a result, the touchscreen cracked and stopped working. I AM.Channel `China in SHOPe`: I bought it here ➤ ➤ Discounts up to 20% when ordering in online stores. Replacing the touchscreen on the "Chinese" tablet. We buy touch-skins here https://ali.pub/ch3si The cost of a subscription to our club.The touchscreen for qysters T72 3G is here https://ali.pub/e8kwd Any product from China “Aliexpress.com” https://ali.pub/uo612 Any product from China “Gearbest.co.Replacement of the touchscreen (touch glass) of the Oysters T72ER 3G tablet. Repair of the micro-USB connector. You can buy a touchscreen at.Tablet repair.Replacement of the touch screen. Replacing the touchscreen. Ordered in China. He warmed it up with a hairdryer, took it off, put it on.Hello. My channel is dedicated to electronics, (computer technology, radio electronics, reviews of all kinds.Replacing the display (screen) on the OYSTERS T72HM 3G tablet (tablet repair) or how to repair the tablet with your own hands.Replacing the Screen on the Tablet is not a complicated procedure, but it requires some knowledge and accuracy. In this video.orion tp 711 a analysis of how to change the sensor touchscreen glass screen chinese tablet If the video turned out to be useful.My affiliate program VSP Group Get connected! : https: //youpartnerwsp.com/join? 59947 Link to buy a touchscreenThey brought a tablet for repair. We will change the touchscreen. The touchscreen is here: Toolbox:I bought here https://ali.pub/v4kcj ○ From other sellers https://ali.pub/fezm8 ○ Tweezers https://ali.pub/wzv4a ———————————————— —–.Replacing the touchscreen (sensor) Oysters T72HM 3G (replacing the oysters t72hm 3g sensor) Change the touchscreen on the Oysters T72HM 3G tablet. For.We are learning to repair the irbis tx18 tablet by replacing the touchscreen Touch Screen from China with AliExpress. How to change the touchscreen to a plan.PMT3038 3G touchscreens: The same touchscreens, but cheaper (cheaper, since we are looking not by tablet model, but by.In this video, we will disassemble and change the touchscreen on the Oysters T72X 3G tablet ordered from AliExpress. The touch came from the transpo.There are more and more tablet owners. The tablet has become an integral part of the sphere of children's entertainment, and this device is very useful for adults as well. It's no secret that all mobile devices are quite fragile, and a tablet computer also has a huge screen, which is very vulnerable. The gadget can suffer from shaking in route vehicles, from the crush in shopping malls, and the device is not immune from falls. The "filling" can suffer from many types of influences. Sounds creepy, doesn't it? How to fix a tablet if something is wrong? Let's look for answers to these questions together.To be honest, it is not always possible to carry out repairs at home. The most common user can easily replace the battery if it has reached its end of life. But even here there is one snag: is it the battery? There are cases when the device uses up its charge very quickly, and also heats the wall of the case in the place where the battery is located. The problem, most likely, is not at all in it, but in the closure.

Repairing a tablet is a rather complicated matter, so we recommend that you take it to a technical center. But if you are enthusiastic and eager to fix it, then read on.Important! If the problem arose in the form of a cracked screen, then information from our separate article "Tablet glass cracked - what to do?" Will help you.Screen breakage is one of the most common problems. You can also take the initiative here, for this you will need:

Disassemble the tablet using a set of screwdrivers. It is advisable to get a model disassembly diagram on the Internet.

Now that you see all the insides in front of you, you need to carefully remove a few bolts and carefully disconnect all the cables, removing the damaged assembly.

We insert a new component, fix it and assemble the device in reverse order.

Important! There are often times when gadgets fall into the toilet, bath, sink, pool. If you take the necessary measures in a timely manner and react with lightning speed, then it is likely that your beloved smartphone or tablet will live a very long life. But in any case, you will need to restore the insides. How this happens and how realistic it is in a given situation, read our special article "Repair of drowned gadgets".How do I fix my tablet if it won't turn on? Let's look at a few cases.It so happens that there is no visible damage, and the mobile device is not going to turn on.What to do in such cases? The fact is that there can be many reasons for a breakdown: internal defects, incorrect operation of the operating system, a damaged charger module. It is best to sort it out in order.How long have you charged your device? If the tablet is completely discharged, then at least 10 minutes must pass before turning it on. Therefore, we advise you to wait a little and try again.Important! If nothing has changed, then look for any external damage on the case, because the device could have been dropped and not told you anything.Is it possible to carry out repairs if the problem is a software failure? Here you already need to understand at least a little software. Often, when turned on, the backlight turns on, and then an idle android appears on the screen. This means that the work of some software was completed incorrectly, which is why the firmware suffers. It is definitely easy to manage here at home, and there is no need for the help of specialists.Important! Before proceeding with the steps below, try to install and run a good antivirus. It is possible that the problem will be resolved immediately.For resuscitation, we do the following:

From the switched off device, you need to get a SIM card and a memory card.

Now we turn on the device, hold down the volume up button and the power button.

You will see a context menu in which you need to go to “Setting” and “Format system”.

Now looking for and choosing “Reset”? Then the device will return to factory settings.

Important! This method will destroy all data on the internal memory of the device. If you don't have a backup, then think a few times before returning your tablet to factory settings.How to repair a tablet at home if a button stops working?Such cases also happen quite often, because we press this button a hundred times a day. It is imperative to know exactly how to act in this situation:

Find and download the disassembly instructions for your particular model.

Disassemble the power button and look at the contacts.

If visible defects are found, then it is necessary to clean the contact pad and return the key to its place.

If these steps did not help, then it is worth installing a new component instead of the old one.

If nothing happened in this case, you will have to contact the service center.

If everything is clear here, then how to fix a broken tablet screen at home? Let's say right away that this is a very difficult task, but you can try.

First you need to remove the broken screen. To do this, it would be nice to get a hairdryer.

Now, with a clerical knife, detach the screen from the case itself.

Remove all debris from the surface with a lint-free cloth.

We unpack the new component, put it on the tablet frame, iron it with our hands.

Important! It is not always necessary to take such drastic measures. Sometimes it is possible to leave everything as it is for quite a long time, if the cracks are not solid, but superficial and have not affected the matrix. You can recognize this by the response of the display. If it is there and everything functions in principle, go the simplest way - fix the cracks in the position that they are. To do this, stick a protective film or glass onto the tablet.