DIY payment terminal repair

In detail: do-it-yourself payment terminal repair from a real wizard for the site my.housecope.com.

Share "How to open the terminal?"

Everyone knows that payment terminals in stock can have material resources in no small amount. Therefore, the protection of these objects is an important issue that organizations responsible for their security try not to leave unresolved.

1. Among the options when you can extract money illegally, there will be such types as mechanical, as well as software hacking. To get a good understanding of each of the procedures, we will consider them in order.

2. As for mechanical hacking, the fact of stealing money from the payment terminal will be obvious. Since in this case the scammers do not intend to open the terminal unnoticed. So, in order to carry out this procedure, we will read as much information about this as possible.

3. Next, you need to start the process of implementing an insidious and criminal case. Today, whole groups have formed that are trying to cash in by robbing payment terminals.

4. Therefore, terminal security is a major topic for organizations wishing to protect their funds. However, all the same, the reliability of these objects is much lower than, for example, in bank safes. Therefore, using a circular saw, you can easily get to the banknote exchanger, and then to the banknotes that are stored in a special container.

5. Then it is very easy to open the terminal, which will solve your question, at the end we take bills of different denominations from the payment terminal.

1. Opening the terminal is possible in a more civilized way, so let's get acquainted with all the nuances. They can even be found on the Internet, but these tips should be applied with caution, since not all are effective. Therefore, we expand our informational horizons.

Video (click to play).

2. Then we get acquainted with the main points, we select a set of programs that will allow us to solve the idea of a criminal case that has arisen.

3. Thus, by cracking the software, or with the help of a special program, the confidentiality of the password will be revealed, then it became possible to get to the necessary funds. Therefore, at the last stage, we apply this option and the fraudulent scheme ended in a positive direction.

Repair of terminals and their components

Payment terminals are one of the most important components of the business of many companies. The key to success in this business directly depends on the efficiency of the terminals. Therefore, only experienced specialists who have sufficient experience in working with such devices are selected to service these terminals. Our company specializes in this area.

Indemit will offer you an excellent service for repairing payment terminals, we have everything you need for this, namely:

Good specialists who know their business and have extensive experience behind their backs will take care of eliminating any problem with your device.
Only high quality materials are used in the work, our service will help not only to power your device, but also to ensure long-term operation without further breakdowns.
We work in the shortest possible time, it won't take long to eliminate even the most difficult breakdown with us.

Bill acceptor - this element in the payment terminal is responsible for accepting bills, and the number of payments received depends on its work. He needs constant care and regular maintenance, without doing this, the device will become unusable, and therefore incur a loss of customers and money.

Service includes:

Detailed diagnostics
Small cleaning with blowing or deep cleaning of all elements.
Firmware upgrade, customer customization and full technical service.
Equipment performance testing.

We also carry out a complete replacement of motors, electronic boards, rubber lenses and rings, in addition, we repair complex modules and control boards.

Large companies analyze and plan the repair of their bill acceptors in advance, thereby gaining an edge over competitors. Our company will provide a full preventive procedure and, having found any malfunctions, will immediately eliminate them.

One of the main conditions for the provision of payment terminal services is a thermal printer. It is required to provide and print a check to the client, which in turn indicates a successful payment.

Our services for the repair of thermoporinters

In our company, you will be provided not only with a complete diagnosis of a device malfunction, but will also bring it back to life, the functionality of the device will be restored until it is fully operational. Also, thanks to our specialists and their experience in this area, the repair will be carried out quickly and reliably.

Our specialization is extensive, here is just a small list of those thermal printer problems that we will repair:

Full technical service.
Replacement of various boards, such as: controller board, presenter board, control board.
Complex cleaning and flushing.
Replacement of components: gears, check output sensors, thermal mechanism and motor.
Troubleshooting the power supply.

You can feel free to contact Indemit, reasonable prices, speed of order fulfillment and service of devices - this is our strong point.

The banknote dispenser is responsible for dispensing and accepting money at the terminals. The difference between this mechanism is its maintenance complexity. Such a mechanism is serviced only in centers specialized for this.

Our employees have sufficient skills to carry out a quick, high-quality check and restore the equipment to work. No matter what model you use, we have spare parts for every model. Indemit will fix all possible problems with your device.

Indemit provides you with all guarantees that all types of repairs to your devices will be performed as soon as possible, with full responsibility and detailed diagnostics, with high-quality replacement of parts.

Foreign practice of cashless payments is gradually entering the everyday life of the Russian man in the street. Any legal entity or individual can install a terminal for payment by bank cards. If, until recently, cashless payments were carried out only between legal entities, now payment by plastic cards for services and goods is not surprising.

Each bank has its own characteristics and tariffs. Before signing the contract, you need to figure out which terminals are most beneficial to the entrepreneur.

Acquiring is a bank service that allows sellers and buyers to carry out the process of paying for purchases by bank transfer. You can find out how the money is returned to the buyer by bank transfer in the article by the link.

Read also: DIY bumper scratch repair

Practice shows that the appearance of calculator-sized terminals at the checkout actually increases the level of sales. The only thing you need to think about is which bank to choose.

You can find out how to install the Qiwi payment terminal correctly in this video:

There are different buildings. In addition to the lock, which can be seen in the photo, you can install a padlock. Boxes with banknotes and coins are also closed with locks, but small.The locks are generally quite reliable.Hello colleague, a couple of years ago I had a chance to work with payment terminals. A couple of clarifications.1. Usually, not just a thermal printer is installed on the terminal, but a thermal printer + fiscalization software, these are legal requirements, all payments through the terminal must be fiscal
2. For good, the terminal must have a UPS
3. I don’t use full-fledged touch screens on the terminals, it’s expensive, so a bundle of 17 ″ Monitor (matrix from it) + touch glass + controller is used
4. a numeric keypad and a card reader can be added to the terminal, which will allow accepting plastic cards for payment, on the streets such crap is rare, but in mobile shops it is easy
5. SOFTWARE: SQL + special software and believe me this is not a small piece of software.In general, the approximate cost of the terminal is 70 - 100 thousand, for example: a bill acceptor costs 15k + a cash drawer, a 10k printer + PTK + registration with a tax office, computer hardware 10-15k, a monitor + sensor + a controller 10-15k1 terminal is able to generate net profit of about 1 lem per month, it all depends on the location and uptimewhen I worked this printer was used everywhere because it is cheap enough, now I don’t know, but we see that nothing has changed.on your problem, first look at the status of the printer, on the left side there is a light with the inscription STATUS, the printer can show its status to it, look for documentation here: page 4.of the possible options: the sensor is clogged, try to blow it corny, the cover of the receipt printer is not completely closed, the cutter is covered, the most worthless option is to change the printer.what you can try to do quickly:
1.open the printer, take out the paper
2.blowing
3.You look if there is any jam
4.close the printer until it clicks
5.fill the paper from behind, it should be dragged through and cut, the Status light should be greenRegarding software, in general, this is not one softinka, but a software package that includes 2 parts: server software and terminal software.For the terminal to work adequately, it must be able not only to accept payments, but also to charge them to the subscriber's account, just for this work they use server software. In turn, it is also divided into 2 types: automated payment management and monitoring, with the first I unfortunately did not work, but with the second I have worked out enough.Monitoring allows you to track the terminal malfunction remotely, understand how much money is in it at a given time, how much was the payment, what uptime, etc., as well as update the terminal, reboot, check the status of devices, block, turn off.Only SQL + specially terminal software is installed on the terminal itself, what you showed in the photo is just a service engineer menu.Terminal software allows you to add / remove / redefine / transfer to another port / equipment + transfers information to monitoring, but this is not the most basic. Most importantly, it will be able to transmit information about the fact of making a payment to the automated payment management center, which in turn will inform the recipient that money has arrived at them. all the data that the terminal transmits is encrypted with a pair of certificates, one for the terminal and the other for the center, without these certificates the terminal will not be able to transfer anything to the center at all.how to make a payment:
the subscriber chooses the service and enters the number - the terminal asks the center if such a service is available and is it active, in fact the number will not be checked by the terminal, - the subscriber deposits money, the bill acceptor will check them and counts - then the terminal reports how much money was received and to which number they need to be credited to the center - the center transmits information about the payment to the recipient of the money, they make the transfer if such a number is valid, otherwise the payment remains unsuccessful, - the terminal prints the check, the subscriber leaves.You can assemble the terminal yourself - it is not as difficult as it might seem at first glance (although you will most likely have to tinker with the first copy).For example, let's try to talk about the types of components and their usefulness:The payment terminal body is the foundation of your future terminal. The case should be chosen depending on the needs and goals of your business.The cases differ among themselves in functionality:

standard or ready-made, with an additional hole for a coin acceptor

you can choose a standard one, but you may need to refine it with a hammer and grinder

The terminals equipped with coin acceptors take these technologies to another level, making life easier for the payer - he does not have to run around and exchange coins for paper bills, thereby attracting customers and increasing your profit.

hinged enclosures (wall-mounted) - have minimal dimensions, which allows you to use in the most original places

outdoor enclosures - such enclosures provide a high degree of burglary resistance, which allows them to be installed in unprotected places

lottery cases or photo kiosks - have an unusual design that attracts a lot of attention, thereby increasing the flow of the curious - and it is a great power to satisfy curiosity.

Bill acceptor - a device designed to accept paper money. He completely organizes the system "from hand to hand" and the profit of your payment terminal mainly depends on the quality of your bill acceptor.Principle of operation:

With the help of sensor systems, the bill acceptor determines the denomination of the bill and verifies its authenticity using comparisons of the optical and magnetic characteristics of the bill with the reference images stored in the built-in flash memory.

Accepted bills are stored in a stacker (metal box, safe) or in a special bag.The main differences between bill acceptors:

accepting banknotes of different currencies

accepting banknotes of different widths

note recognition level

anti-phishing system (prevents you from pulling the banknote back)

and the most important is the life cycle (it also includes the ease of maintenance of the bill acceptor).

A thermal printer is a device for issuing information on a receipt tape, about the operations performed by the terminal.

Principle of operation:

Thermal printers work on the principle of thermal printing, which consists in the use of special thermal paper that darkens under the influence of heat. Thermal paper is an ordinary paper sheet covered with a very thin, several microns, heat-sensitive film. Heat melts the film, and the dye and reagent, which was in the solid state, react.

The main differences between thermal printers:

matching of the mount in the case of your choice

the presence of an auto cutter

reception of thermal paper of different sizes (width, length)

the ability to carry legal reporting in the fiscal registrar mode.

The system unit is the brain of your payment terminal. It is he who unites all the components of the terminal, processes all operations and displays visual information on the screen.The main parts of the system unit

Motherboard

CPU

RAM

Video card (usually built into the motherboard, but if a terminal with a large screen or two conventional ones is planned, then it is better to purchase a separate video card)

Hard disk (hard drive)

Power supply unit

COM-ports board (for terminal accessories).

Monitor assembly - is actually a disassembled monitor inserted into a frame for mounting in a payment terminal.It is worth considering the choice of the size of a conventional monitor, depending on the possibility of installation in your chosen case.To build a monitor assembly, you will need:

Remove the plastic case of a conventional monitor

Fasten in the frame that comes with the case

Establish wiring and insert the assembly into the body of the payment terminal.

Touch screen - for simplicity and convenience.Purpose:

So that the user can enter information, for example, a phone number to which you need to put money or pay for services, and this could be done as quickly and intuitively as possible, a touch screen is introduced into the terminal.

Differences between touch screens:

resistive - react to pressing

capacitive - responsive to touch

GPRS modem is your combat radio operator and irreplaceable companion.Why is it needed:

Provides communication with the payment system

Monitors - you can control it remotely

Keeping statistics.

When money arrives at the payment terminal, it is the modem that sends information to the payment system, where the selected balance is replenished.Watchdog timer - from the word "guard", and it guards your money! By making the payment terminal more stable.Purpose:

Reboot the modem in case of freeze / loss of connection

If the connection is not restored within 30 minutes, restart the terminal.

You don't have to go to the outlet every time to fix system problems, the payment terminal will be able to “recover” itself faster than you arrive. Thus, it will greatly simplify the maintenance of the terminal.You can order all components from our managers.In addition to them, you will need wires to connect devices inside the payment terminal and software OSMP.Payment terminals have become part of the life of modern people. They can be found in educational institutions, shopping centers, on the street, that is, in all passageways. Many businessmen make good money on such devices. In this article, we will consider the reviews of the owners about payment terminals as a business and see how beneficial this line of business is for aspiring entrepreneurs.These machines are designed to accept various payments.Such a device works independently, without the participation of an operator. The payment device consists of the following elements:

Modem that accepts payments;

Bill acceptor;

Screen;

Printer for printing receipts.

With this device, the subscriber can quickly pay bills anywhere in the city.If you are interested in the payment terminal as a business, in order for it to bring a decent income, you need to create a whole system of instant payments. Experts believe that at least 10 devices should be purchased for a successful launch. Entrepreneurs who do not have a large start-up capital on hand for the purchase of equipment can lease the devices. Over time, when the business starts to bring a good profit, you can purchase the equipment in your property.Before you install a payment terminal, you need to officially register your activity. First of all, you need to open an LLC in order to be able to conclude agreements with operators of vending payment systems. In addition, it is necessary to register with the tax office, so that in the future there will be no problems on the part of the regulatory authorities.The next factor is the average bill. For example, you have chosen a place with high traffic, but here the device is used mainly to make payments for an apartment. Since the rent rates are too low, you will make a small profit. On the other hand, you can get 30-40% of your income on the minimum payments in some educational institution.If you cannot decide where to install a payment terminal, a ready-made business will be the best option to start. In this case, you will receive a payment terminal installed in a good place and completely ready for work.

Find an equipment supplier and order devices from him. Experienced entrepreneurs who have been working in this field for a long time recommend buying used equipment from your hands at the start. Thanks to this, you can significantly save money and open more retail outlets. Before purchasing equipment, check consumer reviews for specific models. Thanks to this, you can avoid problems in the future;

Choosing a place. In order for your business to generate good income, you need to choose the right place for the installation of equipment. In this case, you should be guided by patency. The more people pass by, the better;

Installation and configuration. After you choose a location and conclude a lease, you can start installing the equipment. This work can be done independently, following the instructions, or you can turn to professionals for help.

Payment terminal operation scheme

When drawing up a business plan for payment terminals, you must first calculate all costs. First of all, this is the rent. The amount of monthly payments largely depends on the ability to negotiate with the owners of the premises, as well as on an individual approach. If you can convince the management of a shopping center or hypermarket that installing a payment device will help them attract more customers, they will offer you a minimum rent. In addition, you need to find out how much the payment terminal costs, and to which payment system you will connect it.