In detail: do-it-yourself repair of the engine mount with a sealant from a real master for the site my.housecope.com.
Do-it-yourself engine cushion restoration using weight polyurethane.
Contact page
I tried this. lasted for 2 weeks + also vibration
Vladimir Doroshenko Tháng trước
Then try glass glue. I left on it for 2 years.
Lasha Kekelidze 2 tháng trước
zdrstvuyte pomenyal padushki i nachilos vibracia padushki novie zakazival s ameriki radnie i poivilas vibracia chto skajite chto delat mnogie govoryat chto nada podojdat i vibracia uidot
Anders Hoel 4 tháng trước
Polyurethane is different, and it costs a lot. In Stogolm, if ordered with translations into rubles at the rate of 1 to 5. 1kg of polyurethane costs about 5,000 rubles. Fuck expensive plastic.
Anders Hoel 4 tháng trước
In Sweden, they have practically stopped selling spare parts for all Vases except for the cornfield. It is necessary to look for polyurethane.
KZ_01 Baigutov 5 tháng trước
The case when another pillow of the same type is easier to find than pouleritan))
Peace to all of the world ice cream 7 tháng trước
Vladimir Morozov 7 tháng trước
Usually, the pillows (supports) of the engine and gearbox are changed when new ones are on hand. But a great idea for sat down pillows, if they have not torn yet, but the rubber is tired and sagging. I think this repair will be enough for a year and a half.
good afternoon, please tell me what density you need polyurethane for the engine cushion
Vladimir Doroshenko Năm trước
dima onischuk I did not delve into the density of polyurethane.
Collective farm, but as a temporary phenomenon is suitable.
Konstantin Danilov Năm trước
Be sure to degrease the rubber and file it with a file.
Konstantin Danilov Năm trước
There is no vibration, and after the sealant you have to wait 2 days.
 |
Video (click to play). |
Konstantin Danilov Năm trước
Thanks! Hairdryer only, do not melt the polyurethane in the container
Konstantin Danilov Năm trước
Thanks! Hairdryer only, do not melt the polyurethane in the container
Where are these rods sold?
great! what i need thanks)
Tony four fingers Năm trước
and a fucking vibration is provided for you
Vladimir Doroshenko Năm trước
+ Tony four fingers Apparently from the first time it is not clear how he wrote it. Okay, I'll repeat. I have been driving for six months with such a pillow and everything is fine and no vibration, and before that I drove a Volvo with the same design and there were no problems.
Tony four fingers Năm trước
what to try. Voids do not just do that. I tried to insert an oxygen hose.
Vladimir Doroshenko Năm trước
Well, yes, of course)))) I have been driving for half a year and it is unclear whether the engine is running at all or not in the cabin))) you can understand only by the tachometer arrow. And before you fart something, try it first.
Alexander Ivanov Năm trước
I would like a video that captures the operation of the engine with such a pillow. Are the vibrations increasing?
There is also a polyurethane glass sealant, I will try to apply it under pressure by closing the pillow on the sides
I bought it at the car market, filled the pillow. I poured only the bottom half completely, since the polyurethane is slightly softer along the Shore. Vibration has disappeared, I will watch the separation in the summer. By the way, it glues shoes perfectly.
+ Vladimir Doroshenko and where to buy such a polyurethane ??
I agree, he is nuno for a couple of days
Vladimir Doroshenko Năm trước
There is one nuance with him. It dries for several days. In this way, I restored the pillow on the Volvo.
Petr Ovsyannikov 2 năm trước
How long did you leave on this pillow?
Vladimir Doroshenko 2 năm trước
On the one in the video I only go for a week, but in the same way I restored the automatic transmission pillow on the Volvo. For a year, nothing happened to her.
This section is intended only for reports on independently (or not independently) repairs carried out, etc., as well as for their discussion and additions.
All previously created topics with questions have been moved to the section “Service and. "
Newly created themes do not correspond to the profile of the “Repair. ”Will be deleted. Be careful.
Group: Users
Posts: 395
Registration: 17.9.2008
Town: Tambov
Auto: Mazda Demio (2002-2007)
Gender: Male
Has thanked: 13 times
Group: Users
Posts: 1951
Registration: 2.9.2008
Town: Moscow
Auto: Mazda Demio (2002-2007)
Gender: Male
Has thanked: 42 times
all this is good guys, BUT.
But this is only good temporarily.
I think that because of the strong vibration and gravity of the engine, this winding will not withstand at some point and will let you down, God forbid, ugh ugh ugh
and the consequences will not be joyful
DY3W 1,3L CASUAL Color 24V
Nissan Cube body BZ11 2008
Group: Users
Posts: 8
Registration: 15.7.2009
Town: Ulan-Ude
Auto: other
Been thanked: 0 times
Group: Users
Posts: 101
Registration: 9.2.2009
Town: Novosibirsk
Auto: Mazda Demio (2002-2007)
Gender: Male
Been thanked: 1 time (s)
As a temporary option, why not! People need to drive, so in my opinion it is reasonable, or at least MUCH wiser than driving on a broken pillow with a wild vibration on the body.
OUR person will always find a way out of any situation.
In general, of course, as soon as the pillow has flowed, you need to immediately order it and do not wait until it is torn to shreds.
Exchange of experience in the operation, maintenance and repair of a car ...
kom-777 Fri, 04 Jul 2014, 12:18
Wodilich Sat, 05 Jul 2014, 22:00
Wodilich Movement Veteran Messages: 5652 Acknowledgments: 179 pcs. Registration: Fri, 04 Nov 2011 Where: From there Car: Airbus A380-800
- Site
vorobey-ru Sat, 05 Jul 2014, 22:40
Pichalka, but this is nonsense .. Almost all modern cars with hydraulic supports drive.
And such alterations are a pitiful rogue collective farm. Does it make sense to buy a foreign car if you can't keep it? Buy a Zhiguli, go and fix it for a penny.
vorobey-ru Honorary Mazdavod Messages: 1801 Acknowledgments: 78 Item (s) Registration: Sun, 05 Jan 2014 Where: Moscow
kom-777 Sun, 06 Jul 2014, 20:06
Pichalka, but this is nonsense .. Almost all modern cars with hydraulic supports drive.
And such alterations are a pitiful rogue collective farm. Does it make sense to buy a foreign car if you can't keep it? Buy a Zhiguli, go and fix it for a penny.
vorobey-ru Sun, 06 Jul 2014, 21:05
Nu-nu .. Straight hey of design thought.
shl
but in general, it's funny to see how verbal diarrhea begins in response to the truth about the "collective farm" in your address ..
vorobey-ru Honorary Mazdavod Messages: 1801 Acknowledgments: 78 Item (s) Registration: Sun, 05 Jan 2014 Where: Moscow
kom-777 Mon, 07 Jul 2014, 03:36
kom-777 Mon, 07 Jul 2014, 08:22
Nu-nu .. Straight hey of design thought.
shl
but in general, it's funny to see how verbal diarrhea begins in response to the truth about the "collective farm" in your address ..
Vladimir199 Mon, 07 Jul 2014, 08:37
Do you want to wash your car? Ask me correctly how)))
Vladimir199 Maniac flood Messages: 27577 Acknowledgments: 663 pcs. Registration: Wed, 27 May 2009 Where: MOSCOW Car: mazda 6 sedan
vorobey-ru Mon, 07 Jul 2014, 12:47
Note, I spoke fairly about your "collective farm", and in response you began to vilify about my mental abilities. This is a very revealing example of WHO NEEDS to shop here for brains and who has no other arguments ..
Practice has shown that Chinese pillows, made of much better quality than this rogue collective farm, but also made from a single piece of rubber, do not cope with the task. Therefore, it makes no sense to put such shit on the car. Just like putting Zhiguli candles on a Mazda ..
vorobey-ru Honorary Mazdavod Messages: 1801 Acknowledgments: 78 Item (s) Registration: Sun, 05 Jan 2014 Where: Moscow
Vladimir199 Mon, 07 Jul 2014, 13:52
Do you want to wash your car? Ask me correctly how)))
Vladimir199 Maniac flood Messages: 27577 Acknowledgments: 663 pcs. Registration: Wed, 27 May 2009 Where: MOSCOW Car: mazda 6 sedan
kom-777 Mon, 07 Jul 2014, 18:32
Note, I spoke fairly about your "collective farm", and in response you began to vilify about my mental abilities. This is a very revealing example of WHO NEEDS to shop here for brains and who has no other arguments ..
Practice has shown that Chinese pillows, made of much better quality than this rogue collective farm, but also made from a single piece of rubber, do not cope with the task. Therefore, it makes no sense to put such shit on the car. Just like putting Zhiguli candles on a Mazda ..
kom-777 Mon, 07 Jul 2014, 18:37
vorobey-ru Mon, 07 Jul 2014, 18:38
What do you disagree with? Do you generally read the posts of others, or do you just write your own?
I kind of clearly wrote that there is no point in putting such shit on the car at all. ... Neither Chinese crafts, nor a rogue collective farm with a pillow from Niva.
vorobey-ru Honorary Mazdavod Messages: 1801 Acknowledgments: 78 Item (s) Registration: Sun, 05 Jan 2014 Where: Moscow
Wodilich Mon, 07 Jul 2014, 22:30
Wodilich Movement Veteran Messages: 5652 Acknowledgments: 179 pcs. Registration: Fri, 04 Nov 2011 Where: From there Car: Airbus A380-800
- Site
kom-777 Tue, 08 Jul 2014, 04:38
What do you disagree with? Do you generally read the posts of others, or do you just write your own?
I kind of clearly wrote that there is no point in putting such shit on the car at all. ... Neither Chinese crafts, nor a rogue collective farm with a pillow from Niva.
kom-777 Tue, 08 Jul 2014, 04:51
kom-777 Tue, 08 Jul 2014, 04:52
Kostya827 Tue, 08 Jul 2014, 07:15
Kostya827 Veteran of the movement Messages: 9772 Acknowledgments: 131 pcs. Registration: Mon, 22 Aug 2011 Where: Khimki
- ICQ
Wodilich Tue, 08 Jul 2014, 08:10
Wodilich Movement Veteran Messages: 5652 Acknowledgments: 179 pcs. Registration: Fri, 04 Nov 2011 Where: From there Car: Airbus A380-800
- Site
kom-777 Tue, 08 Jul 2014, 08:58
I tried this. lasted for 2 weeks + also vibration
Then try glass glue. I left on it for 2 years.
zdrstvuyte pomenyal padushki i nachilos vibracia padushki novie zakazival s ameriki radnie i poivilas vibracia chto skajite chto delat mnogie govoryat chto nada podojdat i vibracia uidot
Polyurethane is different, and it costs a lot. In Stogolm, if ordered with translations into rubles at the rate of 1 to 5. 1kg of polyurethane costs about 5,000 rubles. Fuck expensive plastic.
In Sweden, they have practically stopped selling spare parts for all Vases except for the cornfield. It is necessary to look for polyurethane.
The case when another pillow of the same type is easier to find than pouleritan))
Usually, the pillows (supports) of the engine and gearbox are changed when new ones are on hand. But a great idea for sat down pillows, if they have not torn yet, but the rubber is tired and sagging. I think this repair will be enough for a year and a half.
good afternoon, please tell me what density you need polyurethane for the engine cushion
dima onischuk I did not delve into the density of polyurethane.
Collective farm, but as a temporary phenomenon is suitable.
Be sure to degrease the rubber and file it with a file.
There is no vibration, and after the sealant you have to wait 2 days.
Thanks! Hairdryer only, do not melt the polyurethane in the container
Thanks! Hairdryer only, do not melt the polyurethane in the container
Where are these rods sold?
great! what i need thanks)
and a fucking vibration is provided for you
+ Tony four fingers Apparently from the first time it is not clear how he wrote it. Okay, I'll repeat. I have been driving for six months with such a pillow and everything is fine and no vibration, and before that I drove a Volvo with the same design and there were no problems.
what to try. Voids do not just do that. I tried to insert an oxygen hose.
Well, yes, of course)))) I have been driving for half a year and it is unclear whether the engine is running at all or not in the cabin))) you can understand only by the tachometer arrow. And before you fart something, try it first.
I would like a video that captures the operation of the engine with such a pillow. Are the vibrations increasing?
There is also a polyurethane glass sealant, I will try to apply it under pressure by closing the pillow on the sides
I bought it at the car market, filled the pillow. I poured only the bottom half completely, since the polyurethane is slightly softer along the Shore. Vibration has disappeared, I will watch the separation in the summer. By the way, it glues shoes perfectly.
+ Vladimir Doroshenko and where to buy such a polyurethane ??
I agree, he is nuno for a couple of days
There is one nuance with him. It dries for several days. In this way, I restored the pillow on the Volvo.
How long did you leave on this pillow?
On the one in the video I only go for a week, but in the same way I restored the automatic transmission pillow on the Volvo. For a year, nothing happened to her.
Do-it-yourself engine cushion restoration using weight polyurethane.
Contact page
I tried this. lasted for 2 weeks + also vibration
Then try glass glue. I left on it for 2 years.
zdrstvuyte pomenyal padushki i nachilos vibracia padushki novie zakazival s ameriki radnie i poivilas vibracia chto skajite chto delat mnogie govoryat chto nada podojdat i vibracia uidot
Polyurethane is different, and it costs a lot. In Stogolm, if ordered with translations into rubles at the rate of 1 to 5. 1kg of polyurethane costs about 5,000 rubles. Fuck expensive plastic.
In Sweden, they have practically stopped selling spare parts for all Vases except for the cornfield. It is necessary to look for polyurethane.
The case when another pillow of the same type is easier to find than pouleritan))
Usually, the pillows (supports) of the engine and gearbox are changed when new ones are on hand. But a great idea for sat down pillows, if they have not torn yet, but the rubber is tired and sagging. I think this repair will be enough for a year and a half.
good afternoon, please tell me what density you need polyurethane for the engine cushion
dima onischuk I did not delve into the density of polyurethane.
Collective farm, but as a temporary phenomenon is suitable.
Be sure to degrease the rubber and file it with a file.
There is no vibration, and after the sealant you have to wait 2 days.
Thanks! Hairdryer only, do not melt the polyurethane in the container
Thanks! Hairdryer only, do not melt the polyurethane in the container
Where are these rods sold?
great! what i need thanks)
and a fucking vibration is provided for you
+ Tony four fingers Apparently from the first time it is not clear how he wrote it. Okay, I'll repeat. I have been driving for six months with such a pillow and everything is fine and no vibration, and before that I drove a Volvo with the same design and there were no problems.
what to try. Voids do not just do that. I tried to insert an oxygen hose.
Well, yes, of course)))) I have been driving for half a year and it is unclear whether the engine is running at all or not in the cabin))) you can understand only by the tachometer arrow. And before you fart something, try it first.
I would like a video that captures the operation of the engine with such a pillow. Are the vibrations increasing?
There is also a polyurethane glass sealant, I will try to apply it under pressure by closing the pillow on the sides
I bought it at the car market, filled the pillow. I poured only the bottom half completely, since the polyurethane is slightly softer along the Shore. Vibration has disappeared, I will watch the separation in the summer. By the way, it glues shoes perfectly.
+ Vladimir Doroshenko and where to buy such a polyurethane ??
I agree, he is nuno for a couple of days
There is one nuance with him. It dries for several days. In this way, I restored the pillow on the Volvo.
How long did you leave on this pillow?
On the one in the video I only go for a week, but in the same way I restored the automatic transmission pillow on the Volvo. For a year, nothing happened to her.
Off-road competitions and events
Unread message -77 »16 Sep 2016, 11:37
Unread message sema »16 Sep 2016, 14:21
Unread message -77 »16 Sep 2016, 17:06
Unread message -77 »17 Sep 2016, 19:58
Unread message -77 »18 Sep 2016, 14:47
Our company carries out repairs, diagnostics, tuning, installation of additional equipment and maintenance of ATVs.
Are you here »Subaru TRAVIQ» Spare parts and consumables »Rubber-metal engine mounts - repair and restoration.
new support CORTECO in the village. Sorry, but there is no way to take pictures today. better pick up the hose! )))
Published by admin in Auto repair and tuning 17.04.2018 0 127 Views
The presence of any kind of bitches in the car should alert any driver. If, in addition to sounds, vibration is also added, then urgent diagnostics are required. You need to start with visual control in the inspection pit.
Such vibrations can most often occur when the engine mountings are torn. Such a part cannot be repaired, therefore, most likely, replacement of the engine mountings will be required.
In the engine compartment, the main element is the cylinder block. All other parts are attached, mounted around it. It itself is installed on special supports that help reduce vibration from the motor, and not transmit it to the car body. Such supports are made using rubber, which dampens unnecessary vibrations. For those who do not know what an engine mount is, we explain: these supports are “pillows”.
The lower supports are made from a pair of steel sheets. Rubber is embedded between them, which reduces vibration.
The upper cushions are made in the form of levers and equipped with silent blocks. Attachment to the car body is carried out on one side, and the other side is fixed on the cylinder block. Such an arrangement of supports is quite durable and inexpensive to perform.
It is not always possible to immediately navigate which side the vibration is felt in the car, because the reason may be in poor-quality road surface or loose fasteners of some engine parts.
The difference between worn and new
One sign of a broken mount may be slight vibration when starting the motor.
But not all car owners attribute such a "sin" to engine cushions.... It is believed that a cold engine can sometimes behave this way. Therefore, it is not uncommon for a driver to find out about this kind of breakdown only after the engine mount has completely come off and a metal grinding sound has appeared. With such a malfunction, you can drive to the nearest service station.
But it is necessary to observe the speed limit in order to ensure safety while driving. It is advisable not to accelerate more than 60 km / h.
A common breakdown is a ruptured back or left cushion. Those who do not know how to check the engine mountings can be advised to use a viewing pit or overpass. Access to the inspection of these parts from below is more convenient, since they can be seen entirely and in the desired angle.
For replacement, it is necessary to choose a warm room, since the work will be carried out with rubberized elements. And they behave "unfriendly" at low temperatures. It is preferable to carry out the replacement in the inspection pit.
It is necessary to disconnect the battery to avoid accidentally short-circuiting. Most often, they begin to inspect from the left front side. This is due to the fact that it is subject to the greatest stress, and access to it is not so difficult.
A torn mount can be repaired. In the event of a breakdown in the rubber block, only a complete replacement is required.
The issue price for passenger cars is 2,000 rubles, and for oversized crossovers and SUVs - about 4,000 rubles.
The cost of such work at the station will cost from 300-500 rubles for the front or side and seven hundred for the back. But you can save money by replacing yourself.
For those who do not know how to replace the engine mountings, we will give a step-by-step algorithm. The first step will be to remove all engine protections. Support the motor with a jack. If the work is carried out on a viewing pit, then a powerful wooden board can be used as a lining. You need one that can withstand the weight of the engine after disconnecting it from all supports.
The layout of the fasteners of the supports
Raise the motor as much as possible in order to unscrew the mount and remove the broken part. We put a new one in its place, and fasten it with fixing bolts. After that, we move on to the rear support. Not everything is so simple here.
Along the longitudinal axis of the vehicle, it receives the strongest load.
Due to this, deformation occurs not only of the mating fasteners of the pillow and the car body, but also the bolts bend. The motor must be raised. It is either suspended from glasses or raised with a jack from below to relieve the load on the fasteners.
If it is not possible to align the bolt, then you can cut it with a grinder.
In some engines, structural elements of the exhaust system interfere. These parts can be removed for better access to the support.
The support can be removed from the seat using oil or WD-40. They are poured over a part that is rusted and does not "break". For the correct installation of the rear cushion, an arrow is shown on the part, indicating the direction of movement of the car. You need to navigate by it.
When dismantling the right engine mount, problems are often created by a generator or air conditioning compressor, which is not advisable to remove.
This leads to depressurization of the cooling system. And replacing freon will cost much more than working with pillows.
Access to the right pillow in most foreign cars can be achieved by removing the right headlight and radiator grill. Well, here you cannot solve the problem with deformed fasteners with the help of a grinder. Parts of the vehicle that are vulnerable to abrasive sparks are located around this area.
A long but safe way is to cut the bent bolts with a metal hacksaw.
Having freed from the old broken engine mount, you can put a new one in this place. The order of assembly is the reverse of the order of disassembly. When reinstalling the radiator grill, you need to protect your hands from cuts.
To ensure safe operation when replacing bearings, the engine must be well secured. Alone, it is rarely possible to accomplish this. We have to use the help of partners.
As a preventive measure, it is advisable to regularly check the tightening torque of the mounting bolts on the pillows. Clean the rubber bases of the supports from oil and other contamination in order to avoid material destruction. This maintenance will extend the life of the parts.
This section is intended only for reports on independently (or not independently) repairs carried out, etc., as well as for their discussion and additions.
All previously created topics with questions have been moved to the section “Service and. "
Newly created themes do not correspond to the profile of the “Repair. ”Will be deleted. Be careful.Group: Users
Posts: 395
Registration: 17.9.2008
Town: Tambov
Auto: Mazda Demio (2002-2007)
Gender: Male
Has thanked: 13 timesGroup: Users
Posts: 1951
Registration: 2.9.2008
Town: Moscow
Auto: Mazda Demio (2002-2007)
Gender: Male
Has thanked: 42 timesall this is good guys, BUT.
But this is only good temporarily.
I think that because of the strong vibration and gravity of the engine, this winding will not withstand at some point and will let you down, God forbid, ugh ugh ugh
and the consequences will not be joyfulDY3W 1,3L CASUAL Color 24V
Nissan Cube body BZ11 2008Group: Users
Posts: 8
Registration: 15.7.2009
Town: Ulan-Ude
Auto: other
Been thanked: 0 timesGroup: Users
Posts: 101
Registration: 9.2.2009
Town: Novosibirsk
Auto: Mazda Demio (2002-2007)
Gender: Male
Been thanked: 1 time (s)As a temporary option, why not! People need to drive, so in my opinion it is reasonable, or at least MUCH wiser than driving on a broken pillow with a wild vibration on the body.
OUR person will always find a way out of any situation.
In general, of course, as soon as the pillow has flowed, you need to immediately order it and do not wait until it is torn to shreds.Exchange of experience in the operation, maintenance and repair of a car ...
kom-777 Fri, 04 Jul 2014, 12:18
Wodilich Sat, 05 Jul 2014, 22:00
Wodilich Movement Veteran Messages: 5652 Acknowledgments: 179 pcs. Registration: Fri, 04 Nov 2011 Where: From there Car: Airbus A380-800
- Site
vorobey-ru Sat, 05 Jul 2014, 22:40
Pichalka, but this is nonsense .. Almost all modern cars with hydraulic supports drive.
And such alterations are a pitiful rogue collective farm. Does it make sense to buy a foreign car if you can't keep it? Buy a Zhiguli, go and fix it for a penny.
vorobey-ru Honorary Mazdavod Messages: 1801 Acknowledgments: 78 Item (s) Registration: Sun, 05 Jan 2014 Where: Moscow
kom-777 Sun, 06 Jul 2014, 20:06
Pichalka, but this is nonsense .. Almost all modern cars with hydraulic supports drive.
And such alterations are a pitiful rogue collective farm. Does it make sense to buy a foreign car if you can't keep it? Buy a Zhiguli, go and fix it for a penny.
vorobey-ru Sun, 06 Jul 2014, 21:05
Nu-nu .. Straight hey of design thought.
shl
but in general, it's funny to see how verbal diarrhea begins in response to the truth about the "collective farm" in your address ..vorobey-ru Honorary Mazdavod Messages: 1801 Acknowledgments: 78 Item (s) Registration: Sun, 05 Jan 2014 Where: Moscow
kom-777 Mon, 07 Jul 2014, 03:36
kom-777 Mon, 07 Jul 2014, 08:22
Nu-nu .. Straight hey of design thought.
shl
but in general, it's funny to see how verbal diarrhea begins in response to the truth about the "collective farm" in your address ..Vladimir199 Mon, 07 Jul 2014, 08:37
Do you want to wash your car? Ask me correctly how)))
Vladimir199 Maniac flood Messages: 27577 Acknowledgments: 663 pcs. Registration: Wed, 27 May 2009 Where: MOSCOW Car: mazda 6 sedan
vorobey-ru Mon, 07 Jul 2014, 12:47
Note, I spoke fairly about your "collective farm", and in response you began to vilify about my mental abilities. This is a very revealing example of WHO NEEDS to shop here for brains and who has no other arguments ..
Practice has shown that Chinese pillows, made of much better quality than this rogue collective farm, but also made from a single piece of rubber, do not cope with the task. Therefore, it makes no sense to put such shit on the car. Just like putting Zhiguli candles on a Mazda ..
vorobey-ru Honorary Mazdavod Messages: 1801 Acknowledgments: 78 Item (s) Registration: Sun, 05 Jan 2014 Where: Moscow
Vladimir199 Mon, 07 Jul 2014, 13:52
Do you want to wash your car? Ask me correctly how)))
Vladimir199 Maniac flood Messages: 27577 Acknowledgments: 663 pcs. Registration: Wed, 27 May 2009 Where: MOSCOW Car: mazda 6 sedan
kom-777 Mon, 07 Jul 2014, 18:32
Note, I spoke fairly about your "collective farm", and in response you began to vilify about my mental abilities. This is a very revealing example of WHO NEEDS to shop here for brains and who has no other arguments ..
Practice has shown that Chinese pillows, made of much better quality than this rogue collective farm, but also made from a single piece of rubber, do not cope with the task. Therefore, it makes no sense to put such shit on the car. Just like putting Zhiguli candles on a Mazda ..
kom-777 Mon, 07 Jul 2014, 18:37
vorobey-ru Mon, 07 Jul 2014, 18:38
What do you disagree with? Do you generally read the posts of others, or do you just write your own?
I kind of clearly wrote that there is no point in putting such shit on the car at all. ... Neither Chinese crafts, nor a rogue collective farm with a pillow from Niva.vorobey-ru Honorary Mazdavod Messages: 1801 Acknowledgments: 78 Item (s) Registration: Sun, 05 Jan 2014 Where: Moscow
Wodilich Mon, 07 Jul 2014, 22:30
Wodilich Movement Veteran Messages: 5652 Acknowledgments: 179 pcs. Registration: Fri, 04 Nov 2011 Where: From there Car: Airbus A380-800
- Site
kom-777 Tue, 08 Jul 2014, 04:38
What do you disagree with? Do you generally read the posts of others, or do you just write your own?
I kind of clearly wrote that there is no point in putting such shit on the car at all. ... Neither Chinese crafts, nor a rogue collective farm with a pillow from Niva.kom-777 Tue, 08 Jul 2014, 04:51
kom-777 Tue, 08 Jul 2014, 04:52
Kostya827 Tue, 08 Jul 2014, 07:15
Kostya827 Veteran of the movement Messages: 9772 Acknowledgments: 131 pcs. Registration: Mon, 22 Aug 2011 Where: Khimki
- ICQ
Wodilich Tue, 08 Jul 2014, 08:10
Wodilich Movement Veteran Messages: 5652 Acknowledgments: 179 pcs. Registration: Fri, 04 Nov 2011 Where: From there Car: Airbus A380-800
- Site
kom-777 Tue, 08 Jul 2014, 08:58
Pokaż elementy sterujące odtwarzacza
- Opublikowany 16 paź 2016
- Do-it-yourself engine cushion restoration using weight polyurethane.
Contact page Motoryzacja
- Repair
I tried this. lasted for 2 weeks + also vibration
Then try glass glue. I left on it for 2 years.
zdrstvuyte pomenyal padushki i nachilos vibracia padushki novie zakazival s ameriki radnie i poivilas vibracia chto skajite chto delat mnogie govoryat chto nada podojdat i vibracia uidot
Polyurethane is different, and it costs a lot.
In Stogolm, if ordered with transfers into rubles at the rate of 1 to 5.
1kg of polyurethane costs about 5,000 rubles.
Fuck expensive plastic.In Sweden, they have practically stopped selling spare parts for all Vases except for the cornfield.
It is necessary to look for polyurethane.The case when another pillow of the same type is easier to find than pouleritan))
Usually, the pillows (supports) of the engine and gearbox are changed when new ones are on hand. But a great idea for sat down pillows, if they have not torn yet, but the rubber is tired and sagging. I think this repair will be enough for a year and a half.
good afternoon, please tell me what density you need polyurethane for the engine cushion
dima onishchuk
I have not delved into the density of polyurethane.Collective farm, but as a temporary phenomenon is suitable.
Be sure to degrease the rubber and file it with a file.
There is no vibration, and after the sealant you have to wait 2 days.
Thanks! Hairdryer only, do not melt the polyurethane in the container
Thanks! Hairdryer only, do not melt the polyurethane in the container
Where are these rods sold?
great! what i need thanks)
and a fucking vibration is provided for you
+ Tony four fingers
Apparently from the first time it is not clear how he wrote it. Okay, I'll repeat. I have been driving for six months with such a pillow and everything is fine and no vibration, and before that I drove a Volvo with the same design and there were no problems.what to try. Voids do not just do that. I tried to insert an oxygen hose.
Well, yes, of course)))) I have been driving for half a year and it is unclear whether the engine is running at all or not in the cabin))) you can understand only by the tachometer arrow. And before you fart something, try it first.
I would like a video that captures the operation of the engine with such a pillow. Are the vibrations increasing?
There is also a polyurethane glass sealant, I will try to apply it under pressure by closing the pillow on the sides
I bought it at the car market, filled the pillow.I poured only the bottom half completely, since the polyurethane is slightly softer along the Shore. Vibration has disappeared, I will watch the separation in the summer. By the way, it glues shoes perfectly.
+ Vladimir Doroshenko and where to buy such a polyurethane ??
I agree, he is nuno for a couple of days
Video (click to play). There is one nuance with him. It dries for several days. In this way, I restored the pillow on the Volvo.
