In detail: do-it-yourself repair of floor cleaning machines from a real master for the site my.housecope.com.
REPAIR OF WASHING MACHINES IN OMSK
Of course, buying new floor cleaning machines is a way out of a situation when working equipment is required. But, as we have seen from our own long-term experience, the resource of the scrubber is not fully developed. But there just comes a moment when it mistakenly seems that it is cheaper to buy a new one than to continue repairing an old scrubber drier.
According to our experts, any scrubber drier loves care and attention, which has a very beneficial effect on its performance.
Therefore, our Company, which itself has an extensive fleet of professional cleaning equipment, including those scrubber driers that have a solid service life (at least 5 years), decided to offer the services of its after-sales service for companies interested in extending the service life of their machines, and promptly repairing them. , and not "put on a joke".
REPAIR OF VACUUM CLEANERS AND DUCT PUMPS
REPAIR OF DISC (ROTARY) MACHINES
COST OF WORK FOR REPAIR OF WASHING MACHINES
The specialists of our company, as soon as possible, will carry out diagnostics and repairs of any complexity of all types of floor cleaning equipment. We will perform ANY REPAIR OF ANY WASHING MACHINE.
If necessary, the transportation of equipment to the service center and back is carried out by our masters on our transport.
A scrubber drier is a large piece of equipment, so there may be more breakdowns in it.
Quite often, a vacuum engine fails in such equipment, since it is flooded with water if it is used carelessly.
Also, if you do not take care of valves, gaskets, taps, they rot and fail.
 |
Video (click to play). |
As a rule, most often in vacuum cleaners and vacuum cleaners the vacuum motor fails.
In a vacuum cleaner, the engine can be flooded with water and it will burn out. In a vacuum cleaner, the engine burns out from a large amount of dust.
To prevent breakdowns, it is necessary to regularly service the equipment. Clean filters in vacuum cleaners, change dust bags more often.
Vacuum pumps must be washed after each use to prevent corrosion and decay.
In order for your rotary machine to serve you for a long time, you need to regularly look after it and follow certain rules.
Most often, in rotary machines, the engine breaks down due to improper maintenance. Firstly, it cannot be washed or wetted at all. If water gets into it, it will immediately burn. But, nevertheless, the rotor itself must be washed after each use. Since if you do not remove the remnants of the aggressive chemistry with which the rotary machine worked, corrosion will begin, which has a very detrimental effect on the equipment.
Price per normal hour ** service equipment maintenance within the city - 1,000 rubles. (without VAT)
** NORMO HOUR - A fee is charged for each hour of service for each specific unit of equipment based on the tariffs for this type of equipment. If the duration of work is more than one hour, all subsequent used time should be considered a multiple of 0.5 hour, if the work lasts less than an hour or even less than 0.5 hour, then 1 hour should be counted.
*** If the client serviced several units of equipment during one trip, then in the Reports on the work performed, it is necessary to indicate the specific time spent on each unit.
The cost of work in this case is calculated as the sum of the total time spent specified in the Reports, keeping the principle of multiplicity of 0.5 hours, and if the total duration of work is less than an hour or even less than 0.5 hours, then 1 hour should be counted
Scrubber drier Is a modern cleaning technique that frees a person from hard manual labor, providing high-quality and quick wet cleaning of the floor of varying complexity, regardless of the type and degree of pollution and the layout of the room.
For a cleaning company buy a scrubber - this means giving up manual labor and increasing your productivity by an order of magnitude. Scrubber dryers Hako are designed for cleaning premises for various purposes and are able to provide cleanliness that meets the highest sanitary requirements.
State-of-the-art technology developed by engineers Hako, provide the scrubber drier with unique qualities that affect the cleaning efficiency, as well as the saving of detergents.
Company Hako offers a wide range of scrubber dryers from small hand-operated models, where the operator works while accompanying the machine on foot, to high-performance riders, self-propelled machines with an operator's seat, designed for very large areas.
In the manual version of floor cleaning machines, there is a limitation on the pressing force of the brushes. On powerful machines with an operator's seat, there is no pressure limit. The clamp is determined by the power of the engine, the type of shield used and the type of surface to be treated.
In addition to the models described, there are options for floor cleaning machines with a sweeping function - combined scrubber driers (Scrubmaster B310 (Hakomatic B310), Scrubmaster B140 (Hakomatic B 910), Hakomatic 1800).
All types of scrubber driers are driven by either electric motors or internal combustion engines (ICEs). In turn, electric motors are divided into those that are powered from the mains and those that are powered by batteries. Internal combustion engines can be both gasoline and gas. The type of the installed engine is reflected in the marking of the machine: E - mains power supply, B - power supply from ACV (storage batteries), V - gasoline engines, LPG gas - gas engines.
When choosing floor cleaning machines, it is worth considering that cars with internal combustion engines have an increased noise level, emission of combustion products when the engine is running. Considering such negative factors, cars with internal combustion engines can only be used in well-ventilated rooms with a large volume of air and with not constantly working personnel. In all other cases, it is recommended to use more environmentally friendly machines with electric motors.
All types of scrubber dryers include the following mandatory elements:
1. Tanks for clean and dirty water
2. Brush drive motor
3. Vacuum pump
4. Brush
5. Support roller
6. Drainage scraper
The main purpose of floor cleaning machines is wet cleaning of the floor, as their name implies.
The principle of operation of scrubber driers is as follows: the rotating brushes, driven by the motor, are supplied with water with detergent, which comes from the clean water tank. Rotating brushes not only distribute the cleaning solution over the floor, but provide mechanical cleaning of the surface to be cleaned, thoroughly scrub the floor surface. During the operation of the brushes, the machine moves progressively, the brushes move to the next section of the surface to be cleaned, and the previous section is processed by a water-collecting scraper that collects dirty water.
The design of the water-collecting scraper allows for its tight uniform adhesion to the surface to be treated, which allows water to be removed from the joints and seams on the floor and provides collection of water to the center of the greatest vacuum created by the vacuum pump. The design of the scraper includes several liners: front, rear and rubber sealing,which together ensures the machine's performance on various types of treated floors with any irregularities and at the same time ensures the ideal quality of cleaning. The dirty solution collected by the scraper is sucked from the floor by a vacuum pump and fed into a special tank for waste solution.
It is worth considering the design and operation of the tanks. Clean water with detergent is poured into the clean water tank, from where the detergent solution is dosed to the brush to the treated area. There is another container for the waste solution, which structurally can be in the same body with a tank for clean water, but the tanks are separated from each other by an impermeable wall. At the beginning of work, only the tank with clean water is filled, during operation it is emptied, and the waste dirty solution enters the dirty water tank. The clean water tanks are easy to empty, have a dosing system, and are easy to refill thanks to the large filler opening with a filter. Tank overflow protection is provided. The dirty water tanks are also easy to maintain.
The machine, moving with rotating brushes, leaves behind an absolutely clean and practically dry surface. Scrubber dryers perform several operations simultaneously in one pass: they wash, polish and dry floor coverings, fully justifying their English name - scrubber-drier, which literally means "brush dryer". The company produces a large number of brushes - cylindrical (roller) or flat (disc), which makes it possible to choose the type of brushes that best suits the client's conditions. The brushes used have different purposes and different hardness depending on the purpose.
Modern scrubber driers allow you to consistently maintain a high quality of cleaning. The machines are equipped with a system for automatically adjusting the pressure of the brushes on the floor surface. The gap between the brushes and the floor is adjusted using a support roller, which has a certain degree of freedom and regulates the pressure of the brushes on the surface to be cleaned. Scrubber dryers are also equipped with an automatic dosage of the detergent solution.
No physical effort or special training is required from the operator to operate the scrubber, which makes it possible to use low-paid personnel without compromising the productivity and quality of cleaning.
Scrubber dryers are industrial cleaning equipment. Scrubber dryers have high performance and power. They are used for wet cleaning of large areas.
There are two types of scrubber driers: battery-powered and networked. Cordless scrubber dryers operate on a rechargeable battery and offer excellent mobility. Such machines are used in large-scale premises (warehouses, hangars, etc.). Networked scrubber driers work by connecting them to the AC mains via a power cable. Such machines can move a distance of the cable length, so it is advisable to use them in relatively small rooms with a sufficient number of outlets.
Scrubber dryers are exposed to moisture, chemicals and other factors during operation. In this regard, some malfunctions often occur in scrubber driers.
The most common breakdowns of scrubber driers:
- the brushes of the scrubber do not function. The cause of this problem may be damage to the drive mechanism. The problem is solved by replacing the mechanism.
- interruptions or complete interruption of the supply of cleaning solution may be an indicator of heavy dirt in the hose. To eliminate this type of malfunction, a thorough cleaning of the supply hose is required.
- low suction power indicates a malfunction of the suction motor. In case of minor breakdowns, the engine is repaired, in case of more serious malfunctions (if the engine is burned out), it is replaced.
- the suction and brush motors are not switched off. In this case, the problem may be hidden in the electrical part of the scrubber, therefore it is necessary to turn off the equipment and send it to the service center for repair.
- batteries are not fully charged (or they are not charged at all). In this case, if the batteries are used for more than 20-30 charges, but the batteries are not fully charged, you should contact the service center for the repair of floor cleaning machines.
Our company recommends not to engage in self-repair of such complex electrical equipment as floor cleaning machines. Here you can order services for the diagnosis and repair of any electrical equipment at low prices. And thanks to our own warehouse of original and analog spare parts, our service center will save you time searching for replacement parts. Our service center for the repair of floor cleaning machines offers services for those who value their time and nerves. Our company carries out professional repair of any electrical equipment.
Rewinding and repair: electric motors, cleaning equipment, power tools, industrial equipment.
Thanks to our rich experience accumulated in the market of professional floor cleaning machines, we decided to share with you the accumulated knowledge on the operation and repair of floor cleaning equipment. Modern scrubber driers are high-quality and reliable equipment that regularly solves the tasks assigned to it. However, even the most perfect mechanism is subject to wear and tear, therefore, after several years of operation, breakdown may occur. We decided to share with you the most common problems with floor cleaning machines and help you solve these problems. Below is a list of the most common problems and their solutions:
CAR IS NOT WORKING
1.1 The ignition key is not fully inserted or not turned.
1.2 Insert and turn the ignition key.
2.1 Batteries are not connected to the machine cables.
2.2 Connect the batteries to the cables of the machine.
3.1 The machine is being recharged.
4.1 Batteries are not charged.
4.2 Recharge the batteries.
CAR DOES NOT GO
1.1 Drive select lever in neutral.
1.2 Choose the direction of travel.
2.1 Too high degree of inclination of the surface.
2.2 Mechanically drag the machine to a smoother surface.
3.1 The machine is braked.
3.2 Release the machine from the brake.
4.1 Thermal protection activated.
4.2 Stop the car for 5 minutes.
5.1 Batteries are discharged.
5.2 Recharge the batteries.
BRUSHES DO NOT WORK
1.1 Brush switch not turned on.
1.2 Switch on the brush switch.
2.1 Thermal protection of the brush motor is switched on or the motor is overheated.
2.2 Clarify the reason (wires, debris preventing the normal operation of the brushes, excessively uneven surface), eliminate it if possible and start over.
3.1 The drive belt is damaged.
3.2 Replace the drive belt.
NO WASHING SOLUTION SUPPLIED
1.1 The solution tank is empty.
1.2 Empty the waste water tank, then fill the solution tank with the solution.
2.1. The solution flow control valve is closed.
3.1 The hose for the cleaning solution is dirty.
INSUFFICIENT SUCTION POWER
1.1 The suction hose is not connected to the suction bar.
1.2 Correctly connect the hose to the suction bar.
2.1 Suction hose and / or suction bar tube dirty.
2.2 Clean from contamination.
3.1 The suction motor is switched off.
3.2 Switch on the suction motor.
4.1 Waste water tank full.
4.2 Empty the waste water tank.
5.1 The suction motor is not powered by batteries or the suction motor in the bedrooms.
5.2 Check connections; in the second case, replace the suction motor.
6.1 The lid of the waste water tank is not closed.
7.1 The drain plug of the waste water tank is not closed.
BRUSH MOTOR OR SUCTION MOTOR WON'T STOP
1.1 Disconnect the machine from the power supply and contact the service center.
SUCTION BAR INSUFFICIENTLY CLEANING AND DRYING THE SURFACE
1.1 The suction bar fins are dirty.
1.2 Clean or replace the plates.
2.1 The position of the suction bar is incorrectly adjusted.
2.2 Correctly adjust the position of the suction bar.
3.1 Suction hose / suction bar tube dirty.
3.2 Clean the suction hose / suction bar tube.
BATTERIES DO NOT CHARGE OR DISCHARGE VERY FAST
1.1 At the end of the recharging process, the batteries are not charged correctly.
1.2 Check the charging data on the display.
2.1 Batteries are new but not 100% charged.
2.2 Batteries will be charged 100% after 20-30 recharges.
3.2 Contact the service center.
4.1 Different density of different elements.
4.2 Replace damaged battery.
It is important to note that in the overwhelming majority of cases, scrubber driers do not immediately fail, but "warn" the operator with uncharacteristic sounds, uneven movement, etc. If you notice any changes in the operation of equipment, it is recommended to perform a professional diagnosis of the main units and parts. This will save the car from permanent damage. If the repair could not be avoided, it is worth entrusting it to specialists, since independent intervention can cause even greater damage to the mechanism.
Agree, not always a cleaning company can afford to have its own service center. After all, this will require the presence of its own repair base equipped with modern technology. We need trained and highly qualified personnel who can quickly diagnose and fix a breakdown. To quickly fix problems, it is important to have spare parts, microcircuits and components. Therefore, the creation of your own repair base is not always possible, and in fact is not profitable for the cleaning company.
Optimal-Center is the official dealer of IPC cleaning equipment in Russia. We have established fast deliveries of components for the professional repair of cleaning equipment. Always in stock spare parts for the prompt repair of scrubber driers
- will quickly help you identify and solve in the shortest possible time the problem of breakdown of floor cleaning equipment,
- will select and replace failed elements and technical units,
- choose exactly the right parts and install them correctly,
- make repairs at the customer's site or at our center,
- diagnose batteries
- and much more
In addition, we will offer you a replacement scrubber for the period of repair, so that your business does not stand idle.
Details can be found by phone: (495) 589-55-22
What does a customer want when they leave a broken scrubber drier to be repaired? Low cost of repair, guarantee of reliability and short terms! All this will be provided by our specialists, but this is not the only reason why it is worth contacting us. Each stage of work on the restoration of equipment from self-respecting craftsmen must be carried out in good faith. This means that after finding out the causes of the breakdown, the problems are mercilessly eliminated, and in the future a similar problem will not arise soon.
- Diagnostics - the cause of the hardware failure is established.
- Repair and restoration of damaged parts of the machine or replacement with original spare parts.
- Test launches and tests.
Points 2 and 3 sometimes have to be repeated if the machine does not work as it should when starting. This will affect the completion time of the repair very insignificantly, but as a result you will receive equipment that is debugged to the point of failure-free operation.
If it seems to you that the scrubber-cleaning equipment is junk, makes uncharacteristic sounds, gets stuck while driving, then you don't have to wait for the final breakdown, but immediately send the device for diagnosis.
In their practice, our specialists have learned to cope with damage of any nature, including:
- wheel surface wear;
- breakage of brushes and drainage beams;
- electronics malfunctions;
- failure of the battery;
- damage to the motor or exhaustion of its resource.
It is especially difficult to solve problems with electronics, because its replacement is expensive, but the masters of their craft will even cope with this.
Repair of scrubber driers is a necessity for any cleaning company, and the more reliable the restoration of broken equipment is, the faster it will cope with cleaning the area, the greater the benefit from using serviceable equipment. So why not order diagnostics for damaged or under-performing devices right now? Knowing that our specialists use the best equipment to identify the cause of the breakdown and repair, you can be sure of the most fruitful cooperation.
The advantages of networked machines include a low price, the ability to work continuously, and there is no need to regularly service the battery, which costs a lot of money. The disadvantage of this type is the presence of a network cable - it is inconvenient to work with it, and sometimes it is simply impossible, for example, when there are many people in the room. In addition, the condition of the cable must be constantly monitored so that an electric shock does not occur due to its wear. And the room must be necessarily equipped with sockets.
But battery models, for example, a tennant scrubber, come without a network cable, that is, their movement is not limited by anything. This technique is already more expensive and can work for a limited time, then you need to charge the batteries. This disadvantage can be easily solved by purchasing additional batteries. In terms of reliability, both types of the listed machines are the same.
For large rooms that need to be cleaned often and thoroughly, it is advisable to use riders - scrubber driers with an operator's seat. They are easy to operate, have good visibility, and the operator will be comfortable and easy to clean the floor covering for a long time. Riders are usually equipped with good high-capacity batteries, the machine can run continuously for about seven hours without requiring a recharge. The device can be equipped with a standing platform or a seat.
This equipment also differs in the type of brushes. For carpets or uneven surfaces such as tiles and mosaics, cylindrical and roller brushes are suitable. Such cleaning equipment collects debris and performs wet cleaning of the floor. Disc brushes are designed for smooth surfaces. They come from different materials, different rigidity, and the density of their adherence to the floor is also regulated.
Model range of Karcher scrubber driers accepted for repair
- Karcher Scrubber Models
- repair karcher B 140 R
- repair karcher B 150 R
- repair karcher B 250 R
- repair karcher B 300 R
- repair karcher B 60 W
- repair karcher B 80 W
- repair karcher B 90 R
- repair karcher B 95 RS
- repair karcher BD 100/250 R
- repair karcher BD 30/4 C
- repair karcher BD 38/12 C
- repair karcher BD 40/12 C
- repair karcher BD 40/25 C
- repair karcher BD 43/25 C
- repair karcher BD 45/40 C
- repair karcher BD 50/40 RS
- repair karcher BD 50/50 C
- repair karcher BD 50/70 R
- repair karcher BD 530
- repair karcher BD 55/60 W
- repair karcher BD 550 BAT
- repair karcher BD 60/95 RS
- repair karcher BD 65/80 W
- repair karcher BD 75/140 R
- repair karcher BD 80/120 W
- repair karcher BD 90/140 R
- repair karcher BR 100/250 R
- repair karcher BR 120/250 R
- repair karcher BR 30/4
- repair karcher BR 35/12
- repair karcher BR 40 / 25C
- repair karcher BR 400
- repair karcher BR 45/22 C
- repair karcher BR 45/40 C
- repair karcher BR 530
- repair karcher BR 55/40 C
- repair karcher BR 55/40 RS
- repair karcher BR 55/60 W
- repair karcher BR 550
- repair karcher BR 65/80 W
- repair karcher BR 75/140 R
- repair karcher BR 90/140 R
- repair karcher BRS 40/1000 C
- repair karcher BRS 40/600 C
- repair karcher B 60/10 C
- Models of single-disc machines Karcher
- repair karcher BD 44-450
- repair karcher BD 53 1100
- repair karcher BDP 43/1500
- repair karcher BDP 50/1500 C
- repair karcher BDP 55/1900 W
- repair karcher BDS 33/190
- repair karcher BDS 43/150 C
- repair karcher BDS 43/180 C
- repair karcher BDS 43 / Duo
- repair karcher BDS 51/180
- Karcher polishing machine models
- repair karcher BDP 50/2000 RS
- Models of machines for cleaning and cleaning of escalators and stairs Karcher
- repair karcher BR 40/10 C
* If you did not find your model of Karcher scrubber in the above list, do not worry, we repair almost all models. Just leave a request for repair on the website or call us By phone - our Servi specialists will answer any of your questions.
According to Servy statistics, the main faults* when working with Karcher scrubber driers are:
- The Karcher scrubber does not collect water, reasons: wear on the suction bars, wear on the suction hose, damage to the suction turbine;
- The scrubber does not start, the main reasons: breakdown of the switch, microswitch, electronic board, battery, engine, electrical wiring;
- Cleaning brushes do not rotate: brush drive (wear of the electric motor, belt, graphite brushes, gears, pulleys), wear of the brushes;
- Malfunction of the electronic control board.
Such breakdowns are frequent in Karcher scrubber driers and sweepers: some are more common, others less common. However, all breakdowns with the correct and professional approach can be quickly corrected by Our engineers. Just leave a request for repair on the site or call us by phone.
Professional cleaning uses special machines for washing and sweeping floors. They are designed for serious loads and differ significantly from household cleaning equipment not only in functional characteristics, but also in price.
Cleaning equipment is designed for tough operating conditions - because sometimes the area that needs to be cleaned with its help exceeds a thousand square meters. In the process of operation, these machines, like ordinary vacuum cleaners, wear out, and components - brushes and shafts - are the first to suffer.
The quality of work of scrubber driers and sweepers directly depends on the quality of the bristles of the brushes. But due to friction, sooner or later the brushes become unusable. How quickly will the brush need to be replaced? It depends on the life of the brush, the type of flooring and the pressure used when cleaning, the degree of surface contamination, and the quality of the bristle of the brush - it is obvious that the life of cheap brushes is shorter than that of expensive ones. It is impossible to say in advance when the brush will fail. However, on average, the brushes should be replaced after 300 hours of operation to ensure good cleaning performance, although this may vary. Scrubber brushes can work normally as long as the bristles are longer than 6mm. However, once this length is reached, the harvesting performance will be noticeably reduced and the machine itself will not be affected.
If the equipment fails due to wear of the brushes, there are two options for solving the problem: buy new shafts and discs for machines from equipment suppliers or contact a company that provides brush restoration services. Both options have their pros and cons.
You need to think about the possibility of replacing brushes at the stage of buying a car. Many manufacturers use unique brush attachment systems, that is, they can only be replaced with branded accessories. This can be associated with certain inconveniences, especially if your city does not have a service center of the company from which you purchased the scrubber drier. In this case, brushes for cleaning equipment will have to be ordered in the online store of this very company. The delivery process can be delayed (especially if the required model is not available in the warehouse, and this happens quite often), and the machine will be idle, which will not benefit your business in any way. In addition, it should be noted that a new brush is not a cheap purchase.
Restoration of brushes will cost 30-50% less than buying new components, while the result will be almost the same. On average, it takes no more than three hours to restore one brush, but taking into account the possible “queue” and time costs for delivery, this period for the client will be from 3 to 12 days.Refurbishing brushes also saves on logistics - you don't have to pay for shipping a new set ordered online. But this service can be a full-fledged alternative to buying a new brush only if you contact a bona fide company that guarantees the quality of services.
The quality of the equipment. Only those companies that use European and American equipment, similar to that used by manufacturers of branded brushes, are worthy of trust. If the technology of introducing the bristles into the brush is similar to the original technology, the quality will not suffer and the restored brush will not differ from the new one except for the price. High-quality equipment allows for the restoration of brushes of various configurations - disc, cylindrical, brush-belts.
Pile quality. For the production of durable brushes, a modern polymer fiber is used, which is resistant to wear and the effects of detergents. Like equipment, the pile must be of good quality and of "noble" origin - from the USA or Europe, not from China. It is desirable that the company be able to provide a choice of several types of bristles to restore brushes of any hardness and purpose. When placing an order for the repair of a brush, you can change the length and degree of hardness of the bristles, corresponding to the original products.
Service price. The cost of repairing a sweeper brush depends on the quality of the bristles and the size and type of the brush itself. On average, the price of replacing a pile ranges from 1,500 to 5,000 rubles per brush.
You are faced with the choice of which brush head to choose for your scrubber drier: disc or roller?
To choose a brush head, you need to have a clear idea of what the task is before you.
First of all, we need to know that there are different types of cleaning: maintenance, intermediate, basic.
Supportive cleaning is a daily cleaning, characterized by the minimum consumption of cleaning agent, the minimum consumption of water and the minimum force of pressing the brushes to the surface.
Serves to eliminate easily removable dirt particles (street dirt, dust ...).
Intermediate cleaning carried out less frequently than maintenance cleaning and serves to remove stubborn dirt that is not removed during maintenance cleaning.
Intermediate cleaning can be done once a week, monthly or quarterly. The frequency of intermediate cleaning depends on the object to be cleaned and, accordingly, the nature of the contamination.General cleaning or, as many say, general cleaning carried out less frequently than intermediate cleaning, once every six months or a year.
It is carried out with the aim of eliminating all stains that form over time, even with optimal maintenance cleaning. This type of cleaning is characterized by high labor and cleaning costs.
The disc brush assembly is used for maintenance cleaning, that is, during daily cleaning. The specific pressure of a disk brush per unit surface is 7 times lower than that of a roller brush.
We know that there is no need for a strong brush pressure for daily cleaning. This is why a disc brush head is used for daily cleaning.But there are objects, first of all, warehouse complexes, the nature of the pollution of which is such that not only washing, but also sweeping of the surface is required.
For example, groats, pieces of paper packaging, small food waste, etc .; on the floors of vegetable warehouses, there may be pulp of crushed vegetables, grains, pieces of packaging, chips of pallets; in warehouse complexes of industrial goods, it is necessary to remove various dry small garbage. In such cases, a roller brush head is more commonly used.How to choose the sealing strips?
Along with the type of suction bar, the correct set of sealing strips must be selected. And here the choice also depends on the type of coverage.
There are three types of sealing strips: profiled (standard); slotted (slotted) and solid.
When working on elastic (for example, self-leveling floor) or hard (concrete floor) seamless coatings, it is necessary to use slotted strips.
They are also great for cleaning tiled floors, although standard strips can also be used for this purpose.
As standard, the machines are equipped with suction bars with polyurethane oil-resistant standard sealing strips, as they are 80% suitable for cleaning modern coatings used. When it comes to a structured coating, only continuous strips should be used, since the depressions in the coating already create the necessary vacuum to suck in the liquid, which means that there is no need for any slots in the strips.What happens if I use standard strips or slotted strips when cleaning structured floors?
Due to the presence of depressions in the surface and slots in the strips, the vacuum will be very small and not enough to collect dirt. How to choose a working speed?
The maximum speed of the scrubber is 6 km / h (7 km / h for BR 100/250). But this does not mean that running behind the machine at that speed can increase harvesting performance.
Of course, by setting the speed to maximum, you can shorten the harvesting time for a given area, but what happens to the quality?
It is likely that the operator will have to re-walk contaminated areas with the machine, which means that no time savings can be achieved.Why? Recall that one of the most important factors in effective cleaning is the exposure time of the cleaning agent to dirt.
Let's see how the scrubber drier works.
First, the cleaning agent is supplied to the brush unit, then it must be collected together with the dirt in the suction bar.
The distance between the brushes and the beam is about one meter. That is, we must give a certain time for the cleaning agent to act on the contaminated coating over a length of one meter.
If we recalculate the speed of 6 km / h into comparable units, we get about 1.67 meters per second. Naturally, with such a speed indicator, it is impossible to effectively separate the dirt.
So what is the optimal cleaning speed? It is equal to 2.5-3.5 km / h. First of all, it depends on the object of cleaning and the time of cleaning (night or day).
When the room is very crowded, the working speed will be lower, since the operator will need to maneuver more often and, thus, reduce the cleaning speed.
If cleaning is done in shopping malls during the day, the working speed will be lower if the same cleaning is done at night. An important aspect here is the safety of the machine in conditions of high traffic of visitors.
In order to avoid setting the wrong speed mode, it is recommended to immediately limit the maximum speed in the menu settings (on the model B 80) or using the rotary control (on machines T 40 and T 60).Video (click to play). So, we got acquainted with the basic rules that you need to know in order to make the most of the possibilities of the scrubber drier and keep the equipment in good working order for a long time. If you still have questions, the specialists of the Clean Company of the official distributor of Karcher equipment since 1998 will be happy to answer them, help you choose the model and accessories that best suit a specific task, and also conduct staff training.
You can also visit section floor cleaning machines on our website.
