Do-it-yourself repair of the dishwasher krona bdx 60126 ht

Thanks to the electronic control board, the dishwashers have a self-diagnosis system. When a malfunction occurs, the module transmits a malfunction code to the PMM display. If you notice that the Krona dishwasher displays an E1 error on the display, then water does not enter the bunker.

Error code E 1 in Krona models indicates that the waiting time for water intake has expired - it has not been drawn into the tank. For what reasons this happens:

• Blockage in the inlet hose, filter, valve.
• Intake valve defective.

• Actuation of protection against leaks "Aquastop" (in such cases, the code E15 may appear).
• Open circuit.

First, rule out a possible network outage, try to reset the error:

• Unplug the machine.
• Wait 15-20 minutes.
• Try starting again. Are the icons on the screen? You need to look for a problem.

You have loaded the dishes, started the washing cycle. Water began to flow through the pipes, but did not get inside, or a very small amount accumulated. What to do, how to fix the problem?

Small debris and rust penetrate from the sewer into the system, which clog the parts. Start by checking the hose:

• Shut off the water supply.
• Unscrew the hose from the PMM body.
• Take a look inside. If there is a blockage, flush it under pressure from the tap.
• Then inspect the mesh filter. Wash it too, and in case of stubborn dirt, soak it in a citric acid solution.

If no blockage is found, proceed to check the functionality of the element.

Additionally, you need to check its wiring. The control board sends a signal to the valve about water intake, its membrane opens and allows the flow. But if the wiring is broken, then the signal will not reach its destination. How to fix the situation? The train needs to be replaced.

To test the valve, apply an operating voltage of 220 volts to its coil. Does the membrane open? This means that the element is working.

The electronic part can be checked with a multimeter. Apply the test leads to the pins of the part. The working element should show from 2 to 4 kΩ. If broken, install a new part.

The inlet hoses are often equipped with a mechanical Aquastop. Inside there is an absorbent sponge, which, if it leaks, absorbs water and shuts off the supply. In this case, only the replacement of the part will help.

Now you know why the Krona dishwasher can show the E1 icons on the screen. Use our instructions, do it yourself.

Krona dishwashers were among the first to appear on the household appliance market. The attitude towards dishwashers of this model among consumers is different: someone speaks positively about their work, and someone does not like them. Still, the Krona dishwasher does not disappear from the shelves, finding its customers.

Dishwasher Krona

Krona manufactures dishwashers in two versions, differing in size, weight and load volume:

• dishwasher Krona BDE 4507 EU;
• assembly model BDE 6007 EU.

Both options have similar performance characteristics.

The Krona BDE 4507 dishwasher will be a good purchase for a small kitchen. The dimensions of the BDE 4507 EU unit are 44.5x55x82.5 cm, the weight is 33 kg, which significantly saves the usable area of ​​a small kitchen. The dimensions of the BDE 4507 EU dishwasher allow you to simultaneously load 8 full dish sets into it, which is quite enough for a small family.

Due to its relatively large size, it is worth installing the Krona BDE 6007 EU dishwasher in kitchens where there is enough free space.The dimensions of the BDE 6007 EU unit are: 59.5x53.5x82.5 cm, weight 39 kg. At the same time, it is possible to wash a set of dishes for 12 persons.

Dishwashers of the Krona model are easy to install by yourself, following the attached instructions, they are highly efficient, easy to operate, but not very economical. Electricity consumption is 1760 W for the entire dishwashing cycle.

In order for the Krona dishwasher to work for a long time and efficiently, the instructions for using the appliance recommend:

• Position the kitchen utensils so that they do not move under the running water.
• Place sharp objects (knives, forks) away from the rubber seals of the machine.
• Plastic, in order to avoid melting, do not place near heating elements.
• Monitor the power cord for good condition. If damage is suspected, do not use the device, but contact the service center for repair.

It happens that the machine stops working correctly, the self-diagnosis system displays an error code. Depending on the code, the Krona dishwashers may need to be repaired at a service center, and some problems can be rectified by yourself. The instructions for the dishwasher tell in detail what errors in the operation of the Krona unit occur most often, and indicate how to solve the problem.

The most common Krona dishwasher error codes are:

• E1 indicates that the dishwasher is not getting water well. This can occur due to insufficient water pressure, problems with the filter or water filling valve. If the E1 error is caused by a malfunction of the kapan or filter, it is not necessary to contact the service center - such minor repairs can be done on your own by clearing the clogged places or installing a new spare part, as indicated in the instructions.
• E2 - slow drainage of water after washing dishes, the causes of the problem and the methods of elimination are similar to those of E1.

• E3 - insufficient water heating to start the program. An error in the operation of E3 can be caused by power surges or a malfunction in the heating elements. Do-it-yourself repairs with the E3 code are undesirable; it is better to contact the service center to diagnose the problem.
• E4 is caused by the Krona being overflowing with water. The solution to the problem will be to check the water level sensors and the outlet valve with the subsequent installation of a spare part instead of the damaged one.
• E5-E7 are associated with a disruption in the supply of electricity to heating systems. Repair of such damage is possible only in specialized workshops, where they will carry out a full diagnosis and install new parts to replace the damaged ones.

Despite the fact that many modern, economical dishwashers have appeared on the home appliance market, Krona kitchen units are still in demand due to their robustness and ease of use.

Repair of PMM KRONA BDE 4507EU, Does not heat water
Good day, dear colleagues! Please tell me this topic.

Repair PMM Krona BDE 4507LP Error E3, Gives error E3 at the end of the wash
Gives an error E3 at the end of the wash The error says that insufficient heating in.

Repair I ask for advice PMM Krona BDE 4507 EU, PMM Krona BDE 4507 EU Error E3 disappeared after cleaning
Hello, masters, this is the case, a dishwasher arrived 3 months ago.

Repair PMM Ariston LSF 7237 s / n 306055155, Pours through the labyrinth window (cheeks, shirts)
I wish you good health! When filling, water is sprayed into the cheek cavity, flows over.

A beginner master. You face every problem for the first time. And why such leading questions, you, too, were not born with a tester in your hands and did some breakdowns for the first time. Really, instead of suggesting the essence of the problem, you must humiliate a person and revel in your own superiority ? I can't throw in the new pressure switch, there is no such thing in terms of characteristics.

There is a tester, but the pressure switch can only be reached through a hatch in the bottom of the car (putting the PMM on its side). Therefore, when the machine is running with the tester probes, I cannot get to the press connectors.

Do not judge strictly, as I understand the problem is in the module?

Is there no information on errors for this device?

If you come to study at the institute, not knowing how to read and write, would you expect to be taught to read and write right in the lectures?

If you already have a tester, then why do you need it if you determine the serviceability of the pressure switch by ear (clicks / does not click)? What information does it give you in terms of repairs?

If you come to study at the institute, not knowing how to read and write, would you expect to be taught to read and write right in the lectures?

If you already have a tester, then why do you need it if you determine the serviceability of the pressure switch by ear (clicks / does not click)? What information does it give you in terms of repairs?

The press is on the back wall in the middle from the bottom.
It is matched by three separate chips, one contact each.

Forgive me, but I asked for advice or information on errors for this model (or how to determine the error code on this device), if you can, then share the information, but no, no.
There is little information about Krone, there are only one, two and all official services even in Moscow. And they have very little information on errors.

Repair of dishwashers KRONA (KRONA), which our company offers, is based on a favorable price / quality ratio of customer service. Our advantages:

1. Professional engineers-craftsmen.
2. Correct selection of replaceable blocks and parts from direct manufacturers.
3. Use of specialized equipment and tools for troubleshooting and repair.
4. Attentive attitude to the customer and his needs during repairs in the workshop and at home.
5. Fulfillment and adherence to the terms of service, both when working in the workshop and when the master goes home.
6. The cost of services including discounts with a special pricing policy.
7. Warranty obligations and their implementation.

But before you want to use the services of our organization, we will focus on some of the operational parameters of the models of this brand and the malfunctions of this household appliance. Type: compact, full-size, narrow; installation type: built-in fully or partially, free-standing; capacity, energy saving class, washing class, drying class, control type, drying type, child protection, leakage protection, express program, programs for fragile dishes and pots, bio program - these are the main characteristics. We repair dishwashers KRONA BDE 4507 LP, BDE 6007 EU, BDE 4507 EU, BDX 60126 HT, BDX 45096 HT and others.

.

The foreman draws up a warranty card for the services rendered.

Dishwasher Powder Dispenser

Poor dishwashing quality is the main complaint of users. Often this happens due to the actions of the user himself, because he loads his equipment with dishes with large and burnt food residues or overloads it with a large amount of dishes. Also, sometimes the user selects the pre-wash function instead of the full cycle mode or forgets to use the detergent.

Breakage of heating elements, delay unit, timers, power circuits, temperature sensors, level switch, thermal relay, engine, pressure switch, inlet valve, indicator lights, pump, solenoid valve, drain hose, engine control unit can cause many problems for users.

Clean the dishwasher filter

Below we move on to considering certain types of breakdowns. Consider the causes of breakdowns and actions to eliminate them.

• does not drain water. Recommendations: cleaning the filter, checking the drain hose, replacing the drain pump, checking the control unit.
• does not collect water. Advice: check that the water supply valve is closed. Recommendations: check the clogging of the inlet valve filter, check the water level sensor for a problem, check the control unit.
• does not heat the water.Recommendations: check the heating element, find an open circuit in the heating element power supply circuit, check the water level switch, check the health of the thermal relay, ring the electric motor.
• does not wash the dishes well. Advice: there is not enough detergent in the detergent dispenser, the dishes are loaded incorrectly (there are many dishes in the chamber), an error when choosing a program.
• does not take the pill. Tip: The door of the detergent container will not open.
• stops during washing. Recommendations: the pre-wash mode is selected, but you need a full cycle mode, remove the clogging of the working pump, check the thermal relay, check the control unit is working properly.
• does not turn on. Recommendations: measure the supply voltage in the outlet, check the power button, check the chamber door, ring the power supply filter, check the shut-off of the water supply valve.
• makes noise when working. Inspection recommendations: if the noise of the impeller bearings - it is necessary to replace the impeller assembly, if the noise from the bearings of the working and drain pumps - it is necessary to replace the pumps.
• does not dry dishes well. Advice: if drying occurs, but not good enough - the machine was turned off or opened too early, it is also possible that the pre-wash mode was mistakenly selected instead of the full cycle mode.
• water leaks. Recommendations: check the door seal, check for leaks in the hoses and their connections.
• flows strongly. Tip: The drain or supply hose is disconnected.
• a lot of foam in the car. Tip: If necessary, reduce the amount of rinse aid (adjustment in the dosing unit).
• the dishes are cloudy after washing. Tip: If necessary, add salt to the dispenser and add rinse aid (adjusting the amount of rinse aid dispensed).
• the door does not close. Tip: The door springs are loose.
• slowly fills in water. Recommendations: remove the blockage or pinching of the water supply hose, remove the blockage of the inlet valve filter.
• shocks. Recommendation: it is necessary to check the electrical insulation of the wiring of the machine.

The workshop also provides services - installation and connection of the Krona dishwasher at home.

Prices are for typical services. The exact cost of the work is determined after the diagnosis.

DEPARTURE OF THE MASTER AND DIAGNOSTICS FREE OF CHARGE UNDER THE CONDITION OF PERFORMANCE OF THE SERVICE IN THE WORKSHOP.

KRONA is a German trade mark, under which products are manufactured with an eye to the "golden mean" - good quality at a low cost. Household appliances Krona, including dishwashers, belong to class A in terms of washing quality and meet increased requirements for efficiency. They have all the necessary functionality, look aesthetically pleasing, and work quietly. At the same time, prices for them are on average lower than market prices for dishwashers of a similar level.

Since we, as a service center, deal with household appliances, usually in a negative way, when they fail, our technicians are well aware of the vulnerabilities of products from various manufacturers. And it should be noted that the repair of KRONA dishwashers is quite consistent with the frequency of calls and the causes of breakdowns with the average values ​​for other brands. So to say that the "budgetary" Krona is worse than its more expensive "colleagues in the shop" is not necessary.

However, with KRONA dishwashers periodically:

• The pump (pump) breaks down, as a rule, due to blockages in the drain hole;
• A strong scale is formed on the heating element, which degrades its performance and further disables it;
• Hoses and pipes wear out, leaks begin.

"RemBytTech" specializes in eliminating such and any other problems with household appliances. Our workshops are equipped with special equipment, and the craftsmen have received the necessary training, as well as training with manufacturers. We know how to repair the Krona dishwasher quickly, efficiently and for a long time, therefore we give a guarantee for all types of our work.

In the same way, just as no doctor before examining the patient will talk about the diagnosis, in the event of a breakdown of household appliances, there is no point in discussing the price of restoring its performance before the diagnosis is performed. But for convenience, we suggest that you independently "estimate" the costs according to our price list. As you can see, this is not overly expensive anyway:

To read the instructions, select the file in the list that you want to download, click on the “Download” button and you will be redirected to the page where you will need to enter the code from the picture. If the answer is correct, a button will appear in place of the picture to receive the file.

If there is a “View” button in the field with the file, it means that you can view the instruction online without having to download it to your computer.

If your material is not complete or you need additional information on this device, for example a driver, additional files such as firmware or firmware, then you can ask a question to the moderators and members of our community, who will try to promptly respond to your question.

You can also view the instructions on your Android device.

At home or at a service center
departure of the master on the day of treatment
repair warranty up to 12 months

• Departure and diagnostics of the master (in case of repair)

• Departure and diagnostics (in case of refusal to repair)

The specialist arrives at a convenient time for you. Possible urgent call and arrival of the master in 60 minutes

No overpayments and "hidden" payments - in 90% of cases you will find out the cost of repairs by phone

Discounts for seniors and people with disabilities 5% -10%

We have a quality control department. Consultations are available to you on the toll-free line +7 (800) 700-73-70

Departure of a specialist is possible at any address in the city, in districts and dachas and the nearest settlements

During our work, it has already been completed over 150 thousand applications.
Daily we process about 300 requests

Notice a problem with your Krona dishwasher? Contact the company "Our Master", and we will help you find the cause of the breakdown. Qualified specialists will quickly arrive at the site, carry out free diagnostics and repair the dishwasher at a favorable cost - from 300 rubles.

Krona dishwashers are distinguished by their ergonomic design, reliable construction and long working life. Household appliances usually break down due to non-observance of operating rules. Malfunctions can occur due to hard water and power surges. Correct installation and connection of equipment is of great importance.

The German brand Krona was founded relatively recently - in 2000. Most of the production facilities are located in Italy. The main specialization of the company is the production of cooker hoods, but dishwashers are also very popular among European consumers. The first models of Krona household appliances went on sale in Russia in 2001. Buyers quickly appreciated the advantages of the equipment and the relatively low cost.

The products of German manufacturers have always been famous for their impeccable build quality and long service life. Krona household appliances are no exception, but they still need periodic repairs. The greatest difficulty in troubleshooting is finding and selecting the right spare parts. However, the warehouse of the "Our Master" company always has the necessary components, so repairs are carried out without delay.

Typical faults in Krona dishwashers:

• failure of the temperature sensor;
• violation of the tightness of the case;
• overheating of the working heating element;
• violation of the integrity of the safety thermostat;
• cessation of the functioning of the circulation pump;
• problems with draining water;
• clogging of the pressure switch tube;
• breakdown of the control module;
• violation of the power circuit.

• High level of training of masters.
• Low prices for all types of work.
• Free diagnostics of dishwashers.
• Efficiency of troubleshooting of various levels of complexity.
• Quality assurance.

To place an order, you need to call.

General info for Kronasteel BDX 60126 HT

Energy class: A

Washing class: A

A type: full-size

Drying class: A

Installation: fully built-in

Display: No

Capacity: 12 sets

Child protection: there is

Control type: electronic

Specifications Kronasteel BDX 60126 HT

Water consumption: 12 l

Instantaneous water heater: there is

Noise level during operation: 49 dBA

Washing times for normal program: 175 minutes

Maximum power consumption: 1760 Wt

Power consumption per cycle: 1.02 kWh

Washing programs and modes Kronasteel BDX 60126 HT

Number of programs: 6

Number of temperature modes: 5

Half load mode: there is

Drying dishes: condensation

Standard washing programs: normal program for daily washing, intensive program for heavily soiled dishes, express program (fast cycle)

Special programs: “Delicate” program for delicate dishes, economical program for lightly soiled dishes

Other functions and features of Kronasteel BDX 60126 HT

Weight: 42 kg

Salt / rinse aid indicator: is / is

Leakage protection: yes, complete

Features of the working chamber: inner surface made of stainless steel steel, height-adjustable basket for dishes

Hot water connection: there is

Dimensions (WxDxH): 60x55x82 cm

Automatic setting of water hardness: No

Delay Start Timer: yes, from 3 to 12 hours

Water purity sensor: there is

Using 3 in 1 products: there is

Sound signal: there is

Beam on Floor Indicator: No

Krona is a German brand for the production of household appliances, which was founded in the town of Forheim, which was famous for its craftsmen in the Middle Ages. It has been present on the Russian market since 2001 and has already won recognition among buyers. Last but not least, this was played by the fact that the repair of Krona dishwashers, as well as other built-in and free-standing household appliances produced at the enterprises of this company, have to be ordered much less often than the repair of problems of analogues of other brands. In addition, buyers are attracted by the relatively low price.

• As experts point out, Crohn's dishwashers most often fail:

1. pump, which occurs due to a clogged drain hole;
2. Heating element, on which scale was formed, which brought it out of order;
3. hoses and nozzles, which is observed as a result of their deterioration and leads to the need to make urgent repairs.

• Some of these problems are the result of improper use, such as overloading the machine with dishes or placing dishes, bowls, etc., along with large pieces of food in it.

• Before ordering the repair of Krona dishwashers at home in Abakan, you should make sure that it is impossible to repair them yourself.
• For example, contacting a service workshop is not necessary if:

1. Water is poured slowly. In this case, you can independently remove the clogging of the filter in the inlet valve or pinching the hose through which water is supplied to the dishwasher.
2. The Krona dishwashing machine does not dry dishes well. Select full cycle mode and do not turn off the machine too early.
3. The dishes will become cloudy after washing. You can add salt to the dispenser or adjust the amount of rinse aid dispensed.
4. Poor washing quality. Make sure that the amount of detergent in the dispenser is correct and that the dishes are loaded correctly.

In other cases, especially if the machine "shocks", makes unusual sounds or does not turn on at all, you need to contact the professionals.As experience shows, an attempt to independently repair household appliances, especially if such a procedure involves the replacement of some parts and assemblies, often ends up with more serious malfunctions.

In Abakan, it is possible to repair, among other things, Kron's built-in household appliances inexpensively in a workshop. The cost of such a service will depend on the complexity and urgency of the work that needs to be done. A master from our service center will go to the address you specified as soon as possible and fix the problems using professional equipment and original spare parts.

KRONA BDX 60126 HT manual contains pages in Russian

Go to the download page for the file of this instruction: Download PDF

Installation and operating instructions

Installation and operating instructions

To avoid breakage, before connecting
turning on the equipment in the cold
the season must be
press it unpacked when
room temperature not less
2 hours.

When using the device
Observe the following precautions
precautions:

Under some conditions, Hydrogen can

can be formed in gas supply systems
hot water that has not been used
more than two weeks.

If hot water has not been used

more than two weeks, then before using
use a dishwasher
turn off all hot water taps on
A couple of minutes. This will remove
any accumulated hydrogen. Insofar as
gas is volatile, do not smoke or use
those open flames during this period. Our
the company is constantly striving to use
the use of such technologies and means that
rye allow to reduce the consumption of electricity
energy and conserve natural resources.
This is how we contribute to
environmental protection.

This device must be grounded.

but. In the event of a malfunction or breakdown
ki, grounding will reduce the risk of damage
electricity. This device
equipped with a cord with a grounding conductor
water and a grounded plug. Fork
should be included in the relevant

the outlet to be installed
lena and earthed in accordance with the valid
rules.

Incorrect connection for

ground wire can lead
electric shock.
Check with a qualified
electrician or representative
service if in doubt
you are in the correct grounding
niya. Do not remodel electrical
supplied plug
with the device; if she doesn't fit
dit to the outlet - change the outlet
with the help of a qualified
electrician.

Do not break, do not sit down and do not stand-

on the door or the rack.

Do not touch heating elements

during or immediately after use.

Do not wash plastic dishes if they are

there is no special marking that
it is dishwasher safe
noah car. For unmarked po
courts refer to the recommendations of her
manufacturer.

Use only those products for

washing and rinsing dishes that
specially designed for car
tic dishwashers. Nikog-
yes, do not use soap, products for
detergents or hand washing products.

Keep children away from detergents

to the open door of the dishwasher
noah machine, inside can remain
detergent.

The company "Mosremusluzhba" will carry out professional repair of the Krona dishwasher at home in the capital region and the near Moscow region. Experts with engineering education and extensive experience with German Krona equipment will eliminate malfunctions of any complexity with a quality guarantee.

Registration of the application implies mandatory consent to the Agreement on the processing of personal data

Our company has some of the lowest prices in the region for the repair of the Krona dishwasher in Moscow. Discounts are provided when ordering through the website and presenting a social card. We periodically hold promotions that allow us to order repair work of varying complexity inexpensively without compromising their quality.

* The price is indicated only for the work of the master, excluding the cost of spare parts. The full cost will become known only after the diagnosis.

** Payment for diagnostics will not be required if you agree to be repaired by a Mosremosluzhba specialist.

The line of these dishwashers is produced under a well-known German brand and is aimed at the optimal combination of price and quality. The equipment is available to a wide range of buyers, it is distinguished by economical consumption of electricity and water, reliability and durability.

To increase the service life of the machines, it is recommended to observe the conditions of their operation (indicated in the instructions). It will not hurt to periodically clean and flush the rocker arms, water intake and drain systems.

Complex repairs are recommended to be carried out only with the involvement of a qualified technician with experience.

Kron's products, like everyone else's, rarely fail electronic circuits - they are of a fairly high quality and reliability. Much more often you have to deal with all sorts of blockages, the impact of hard or poor-quality tap water.

Blockages can (and even should) be systematically removed by yourself. If, due to the formation of scale, the heating element of the dishwasher is out of order, you will have to contact a workshop to replace it. The same should be done in case of problems with the circulation pump, water or temperature sensors.

The built-in dishwasher Krona is a great option for those who value elegance and functionality.

For more models of Krona kitchen appliances, follow the link:

The loading volume of the machine is 12 sets. For the convenience of placing dishes in the machine, the plate racks can be folded, and the height of the upper basket can be adjusted. From the programs here only the most necessary. It is worth paying attention to the intensive mode, it will help not only to wash heavily soiled dishes, but also return the previous shine to pots and pans. Use the “half load” mode to avoid wasting water and energy.

There is a delayed start function here. It will also help you save money with a two-tariff meter and add convenience. we started the sink and remembered about one more plate - you can add it if the detergent has not been used yet.

Even a non-specialist understands that a dishwasher of any brand can theoretically have any breakdown. If you start listing this so-called list of typical breakdowns, and even talk about how to fix them, you can write a whole book. While writing this article, we decided to take a different approach.

The world's leading service centers keep statistics on dishwasher malfunctions. We decided to describe the most common malfunctions that occur with specific brands of dishwashers, based on the data of these statistics, not forgetting to touch on the repair of professional dishwashers, and that's what came of it.

According to statistics from leading service centers, the main "sore" of Hansa dishwashers is the water level sensor. Why this particular sensor breaks down more often in cars of this brand is difficult to say, maybe the machine design or poor-quality parts is to blame, but the fact remains. In most cases, an electrician burns at the pressure switch, so it cannot be repaired, it needs to be changed.

How do you know if it is the pressure switch of the Hansa dishwasher that is out of order? What are the symptoms of the problem?

• Water is constantly poured and drained into the dishwasher.
• Less water is poured into the dishwasher tank.
• More water is being poured into the dishwasher tank.
• The dishwasher stops abruptly and stops without pumping out the water.

How to repair Hansa dishwashers in this case? It is necessary to check the pressure switch with your own hands, and then, depending on the result, replace it with a new one. How to do this is described in sufficient detail in the article Replacing the pressure switch in the dishwasher.This publication tells not only how to repair Hansa dishwashers, aimed at replacing the water level sensor, but also how to properly check this element.

For your information! Hansa dishwashers are mainly assembled in China, but surprisingly, their quality is far from the worst.

Experts say that the most frequent breakdowns of various AEG dishwashers are malfunctions of the drain pump. In general, the situation is quite surprising when you consider the truly German quality of this part and the impeccable installation, but as they say, the statistics are relentless. How to understand that the pump has broken down? In fact, according to external symptoms, this cannot be done 100%, although some of their manifestations need to be taken into account.

1. The pump emits irregular noises of varying strength, while the dirty water in the wash chamber continues to stand.
2. At the moment when, according to the washing program, the dirty water should be drained, the dishwasher freezes and stops working.
3. After starting the washing program, the dishwasher freezes, giving an I 20 error.

If one of the above signs of breakdown makes itself felt, this is a reason to check the pump with a multimeter. How to check and repair AEG dishwashers? We do the following.

• Disconnect the dishwasher from the network, turn off the water and disconnect the inlet and outlet hoses.
• We take out the dishwasher to an empty place, after placing a rag there.
• We take out the car and put it on the back wall.

Important! When you tilt the dishwasher, a little water will pour out of it onto the floor.

• Carefully remove the pallet, find the pump (a branch pipe with a drain hose is connected to it) and connect the multimeter probes to the contacts. Based on the results of the check, we decide to change the pump or look for the cause of the malfunction further.

You can replace the pump in the AEG dishwasher with your own hands, for how best to do this, read the article How to replace the pump in the dishwasher, although of course it is better to entrust this work to the master, because the dishwasher is expensive.

A specific breakdown of Neff dishwashers is the frequent operation of the leakage protection system. Users who first encountered this problem are very worried and run to call the master as soon as possible, the master arrives in 30 seconds. fixes the cause of the problem, gets paid, and leaves. It seems to us that this is not too fair, so now we will tell you how to repair Neff dishwashers in a couple of minutes with your own hands, and most importantly, absolutely free.

First, let's figure out how and why the leakage protection system of these machines works. The fact is that at the bottom of the washing chamber of the Neff dishwasher there is a rather large float, more precisely the upper part of the float mechanism of the anti-leakage system. When water enters the sump, the float rises, a sensor is triggered and the machine stops working. This is the case under normal conditions.

Unfortunately, this is more often the case. Food residues and dirt get under the movable cover of the float mechanism, from this it rises and the protection is triggered. Of course, in this case, there is no water in the pan and it is useless to look for it there. What need to do?

• Switch off the dishwasher using the on / off button.
• Open the wash chamber door.
• Grasp the anti-leakage float cover with your hands (the float is next to the debris filter).
• Raise and lower the float several times, you can immediately gently remove the dirt that has accumulated under it with a cotton swab.
• Next, turn on the machine and check how it will work.

Believe it or not, the repair of Neff dishwashers can be completed on this, unless, of course, we are talking about this most frequent malfunction.

Note! Often, foreign objects (chicken bone, a fragment of a broken plate, etc.) get stuck in the hole under the upper part of the float, interfering with its normal operation. If the foreign object is not removed, the protection will not work.

In whirlpool dishwashers, according to all the same statistics, the inlet valve most often fails. In order to carry out the repair of Whirlpool dishwashers in this case, it is necessary to understand exactly whether its electrical part is broken - the coil or the mechanical part. If the electrician is out of order, then the valve must be replaced; if the mechanical part is broken, there is a chance to revive the part. What actions need to be taken?

1. Turn off the machine, and then unscrew the front panel located immediately under the door.
2. On the front left side of the machine, you will see a filling valve with a hose connected to it.
3. We disconnect the wires from the coil of this valve and install the ohmmeter probes on the contacts. We set the minimum resistance value on the device and start the measurement. If the device shows a value from 500 to 1500 Ohm, the electrical of the inlet valve is fully functional, if the resistance is much greater than these values ​​or less, the valve is broken.
4. If the electrician is in good working order, but the valve still does not work, most likely it is clogged with lime deposits, you need to unscrew its body and clean the mechanism.

If, after the above manipulations, the operation of the valve is not restored, you need to change it. As you can see, repairing Whirlpool dishwashers, at least in relation to this malfunction, is not difficult. Any good owner will make it with his own hands without any problems.

The main weak point of Krona dishwashers is generally recognized as the control module. If the other parts of this dishwasher are quite reliable, then problems often occur with the control unit. In 99% of cases, there is a factory defect, then the tracks are poorly soldered, then the elements of the board are poorly contacted. Some experts are of the opinion that the manufacturer has begun to purchase control modules for its machines in the PRC, but it is not possible to verify this information.

Important! If you suspect that the control module is out of order, and the dishwasher is under warranty, immediately call the technician and send the machine to the service center for repair.

How to repair Krona dishwashers? In this case, we can unequivocally say that it is not worth doing repairs with your own hands. The control module is an expensive part, unqualified repairs can completely ruin it and you will have to buy a new module, spending about 10,000 rubles. Better immediately contact a specialist - it will be cheaper. Craftsmen repair Krona dishwashers quickly and professionally, saving you time and hassle.

If the control module breaks down in Crohn's dishwashers more often, then there is not even statistics for frequent breakdowns of Kuppersbusch dishwashers. Does this mean that the repair of Kuppersbusch dishwashers is required so rarely that it makes no sense to keep such statistics, or does the manufacturer make efforts so that such information does not reach the consumer? With great difficulty, we managed to get some information from several masters who claim that more often the repair of Kuppersbusch dishwashers is required when their on / off button breaks.

The symptoms of a breakdown in this case are simple - the dishwasher stops turning on and off from the button. How to repair Kuppersbusch dishwashers in this case?

• We open the door of the dishwasher.
• Take a Phillips screwdriver and unscrew the inner wall of its door.
• We unscrew the control panel and clean the contacts of the on / off button. Very often, moisture contacts oxidize and stop functioning. Cleaning up for a while helps, but the problem may recur later.
• We screw the control panel into place, assemble the door and check the operation of the dishwasher.

Summing up, we note the repair of industrial dishwashers, as well as household repairs, it is far from always possible to do it yourself. Of course, a lot depends on the skills and aspirations of the user, but more often than not it is better to entrust the repair to a professional, because the health of your iron assistant is at stake. Good luck!