As you can see, making a ceiling from plastic panels is not particularly difficult, even for a beginner in repair. And the aesthetic effect will surpass all your expectations.
Today there are many ways to decorate ceilings.
They can be painted, pasted with wallpaper, sewn up with drywall, installed suspended or suspended ceilings, sheathed with wood.
In fact, there are a lot of options. One of them is PVC surface finishing.
Moreover, almost everyone can sheathe the ceiling with plastic panels - this requires a minimum set of tools and the right hands.
Perhaps this is the most economical and simple way of finishing that you can do yourself.
Of course, for living rooms, this option is hardly suitable, it will all look too cheap. But for a corridor, balcony or bathroom - this is one of the most optimal solutions.
Like any other building material, plastic panels have their pros and cons.
Significant advantages over other types of finishes are the cheapness of this material and the ease of its installation.
And also the fact that the installation of plastic on the frame makes it easy to hide all surface imperfections.
Unfortunately, there are no ideal building materials. Plastic panels are not without them either.
At the very beginning, you need to purchase plastic panels.
And for this you need to decide on their appearance.
Today, on the building materials market, there are several types of panels that differ both in shape and design, as well as in technical characteristics.
First, there are wall and ceiling panels.
Their main difference is in the lesser thickness and weight. For the ceiling, thinner and lighter panels are intended, for the walls, on the contrary, they are more rigid.
The length of the ceiling strips can be 6 m and 12 m, and the length of the wall strips - 3 and 6 meters. The thickness of the wall panels is 10 mm, and the thickness of the ceiling panels is 5-7 mm.
According to the method of installation, they are divided into seam and seamless. Seamless panels allow you to get a perfectly flat surface, but they are more difficult to install. Seamless ones are easier to install, and if defects are formed at the joints of the strips, they can be hidden with special inserts.
Plastic panels can be plain, have different textures or imitate natural surfaces. Thanks to this, there are never any problems with the choice of design.
For example, if you need to sheathe the ceiling in a wooden house with plastic panels, you can choose a panel that imitates a tree pattern.
In order for the ceiling to last a long time and at the same time not cause problems, you need to carefully approach the process of buying it. In fact, there are several points by which you can determine the quality of the panel.
So, first, you need to carefully inspect the plastic. There should be no irregularities, roughness or blotches on the panel. Also, there should be no chipping or chipping.
If the plastic has a texture, then it should be clear, without distortion and defects, uniform over the entire plane. If there are white stripes at the edges, this indicates poor quality material.
Also, the panel should have everything in order with the form. No pinches, waviness or distortions. Those. a high-quality product should have a perfectly flat and smooth surface with a uniform pattern.
You can also pay attention to the stiffeners. The stronger and better the panel, the more there will be. It makes sense to count the ribs for different planks. It is worth choosing those panels in which there will be more of them. By the way, the slats to be compared must be of the same width.
As for the front part of the panel, it should be firm to the touch, not punctured or see through. The joining grooves should be wide and tight, and the joining of the panels to each other should be effortless.
You can try bending the bar, thereby checking its elasticity. If the plastic cracks, this is evidence of the extremely disgusting quality of the material.
Another check that it is advisable to do before buying is to squeeze the panel with your hands. No traces will remain on high-quality plastic. If there are dents, then it is better to refrain from buying this material.
You can learn about the installation of plastic panels on the ceiling from the video:
VIDEO
First of all, you need to purchase plastic panels. The choice of color schemes here is simply huge. Although, for the ceiling, plain, light-colored plastic panels are best suited. In this case, the room will be lighter and more spacious.
Of course, you should not buy the cheapest products - plastic can quickly crumble, and also suffer during the installation process.
It is best to buy panels from trusted manufacturers. It also makes sense not to buy the thinnest white plastic - it can show through.
In addition to the panels themselves, it is necessary to purchase a fastening strip, plinth and corners for connecting it at the corners. Also, it is worth thinking about lighting. To do this, you should purchase recessed lights and wiring.
In addition, you will need fasteners. These are anchors for fixing the frame, screws or staples for plastic, as well as glue or silicone sealant for the skirting board.
It is quite possible that at this stage it is worth purchasing a heater - the room will become warmer and the noise will decrease.
To make a frame, you can use two options:
Antiseptic treated timber.
Galvanized metal profile used for plasterboard installation.
In the second case, it will be more difficult to mount plastic panels and for this you will need a screwdriver. Also, this option will be more expensive, but also more durable.
To calculate the number of PVC panels, it is necessary to calculate the ceiling area and divide it by the area of the panel itself. In this way, the required number of strips will be obtained. To calculate the ceiling plinth, you need to calculate the perimeter of the walls.
To find out the number of profiles or timber for the manufacture of lathing, it is advisable to draw a diagram. It must be remembered that the recommended distance between the guides is 50 cm. It is also worth considering that in the places where the lamps are installed, additional reinforcement of the frame is made.
It is better to take fasteners for plastic panels with a margin. It is calculated at the rate of 1 self-tapping screw for half a meter.Anchor bolts for fastening the battens are installed with the same pitch.
For normal operation, you need the following tool:
A hammer drill, but you can also do with a hammer drill
Screwdriver
Construction stapler
Hammer
Water level
Roulette
Hacksaw for PVC or metal
Gon
Measuring cord or line
Personal protective equipment: gloves, goggles
In order for the final result to be satisfactory and pleasing to the eye, it is necessary to carry out preparatory work. So, how to properly sheathe the ceiling:
On this, the crate can be considered complete.
Installation of panels on the ceiling
After installing the frame, you can start covering it with plastic panels.
Before that, it is worthwhile to make sure once again that the mounted lathing is horizontal.
Since even small deviations in the guides can lead to significant defects.
It is also worth considering that it is undesirable to carry out installation work at a room temperature below 10 degrees.
If the plastic panels were stored at a temperature significantly lower or higher than in the room where they will be mounted, they must first be brought into this room and left for at least one day for acclimatization. Then:
This completes the process of covering the ceiling with plastic panels. From the instructions above, you can understand that there is nothing difficult in this matter. The most important thing is to carefully level the walls to avoid distortions.
Plastic panels are very unpretentious to operating conditions. Due to its composition, this material is resistant to chemicals, so any household detergent can be used to clean the plastic.
The anti-static cover of the panel prevents dust from forming on the ceiling, so it only needs to be washed a few times a year.
It is worth remembering that plastic is afraid of mechanical stress. And even if it is heavily soiled, it is better not to use metal brushes and scrapers to clean it. A soft sponge is great for these purposes.
As you can see from the described sequence of actions, the installation of plastic panels is quite a simple task. And the low cost and high practicality of this material make it a very good choice for ceiling sheathing in non-residential rooms.
Have you noticed a mistake? Highlight it and press Ctrl + Enter to let us know.
If there is a desire to update the interior in the living room, in the bathroom, hallway or in the kitchen, then you cannot do without the reconstruction of the ceiling. And one of the options could be the installation of a plastic lining on it. Today, the assortment of building stores includes a lot of polymer panels made in different colors or with patterns imitating natural finishing materials - stone or wood of various species. Therefore, this cladding can be selected for any, the most sophisticated interior, made in the style you like.
How to sheathe the ceiling with plastic
How to sheathe the ceiling with plastic yourself, so that the final result looks "professional" and becomes an integral part of the design of the entire room? This question arises for everyone who starts repairing residential premises, and you need to try to answer it within the framework of this article.
Finishing polymer panels, as a rule, consist of two thin plates spaced at a certain distance, between which there are stiffeners that connect the outer and inner sides and at the same time make the material more durable. On the lateral sides of the panels there are elements for connecting individual parts to each other, arranged according to the "tongue-and-groove" principle. They facilitate the installation of panels and securely hold them in any position strictly in the same plane.
Several samples of plastic ceiling panels
PVC lining, intended for installation on the ceiling, can have dimensions in length from 2400 to 6000 mm, and the width of the strips varies from 100 to 500 mm, thickness - from 5 to 12 mm.
The panels are produced with a wide variety of surfaces - they can be glossy or matte, ideally white or colored, in the form of tiles and strips, with or without a textured pattern.
For high-quality finishing, PVC panels are completed with the necessary assortment of fittings profile elements, which help to give a finished look to any of the surfaces lined with this material.
Fitting profiles required for the neatness and completeness of the cladding.
- The outer corner covers the joint of the panels at the outer corners. Its design allows you to hide the joints of cut unsightly edges.
- The F-profile is used to decorate the edges of the finishing structure. You cannot do without it, for example, when facing window slopes, or when finishing a ceiling that has several tiers.
- Docking profile is used in cases when the lining changes its direction. For example, panels are first installed on the ceiling along and then across, which helps to divide the surface into different design zones.
- The inner corner is installed at the junction of the ceiling and walls, in the event that it is not planned to install a ceiling plinth in this place.
- The starting profile can be installed in different places of the structure, where it is required to close the edge of the plastic panel.
- The ceiling plinth is installed along the perimeter of the ceiling before installing the lining panels, giving the structure a neatness and completeness. To connect the skirting board at the corners, you will need special connecting corners, under which the cut edges of the skirting board are hidden.
The material from which the panels are made is environmentally friendly, recognized by the Ministry of Health as safe for the human body.
The surface, decorated with plastic panels, is easy to clean, it lends itself to both wet and dry cleaning.
The service life of this material, with proper installation and maintenance, can be 10 ÷ 12 years, without losing its original appearance.
Ease of installation allows, even in the absence of experience in this work, to carry out the process of installing the material on the desired surface independently, without the involvement of specialists.
The price for plastic lining is not too high, so if one or more panels are damaged, they can be replaced with new ones, without damaging the rest of the surface.
When buying PVC panels, you need to rely on several selection criteria:
Panel size: width, thickness and length.
The length of the water must be said separately - it must be chosen in such a way that as little waste as possible remains. For example, with a room width of 2400 mm, it is worth purchasing a lining with a length of 2500 or 5000 mm.
It is worth carefully calculating the length of the room, choosing, if possible, the width of the panel, a multiple of this parameter of the room.
Since the panels can be of different quality, their price also varies significantly. You should not buy cheap finishing materials, as they will last a shorter period of time than high-quality ones. Determining the quality of the panels is not so difficult, paying attention to the following points:
- Appearance: the correct geometry of the panels, the quality of the surface, its evenness and the uniformity of the pattern distribution. Stiffeners installed inside the lining should not appear on its surface.
In high-quality panels, the thickness of the outer walls should be at least 1.5–2 mm, the same applies to the stiffeners - the more stable they are, the longer the material will last. If, when pressed with fingers, the ribs bend, this indicates a low quality of the material, since they should not react to such an impact.
The panel should not deform from such a point effect.
- To the touch, the surface should be uniform and perfectly flat, longitudinal and lateral distortions are unacceptable on it.
- It is also necessary to check the ease of joining the two panels. To do this, you need to connect them and see if a single plane is obtained without gaps, or if the surface has unintended gaps. High-quality panels should be easy to join, the spike should completely go into the groove, without leaving clearly visible traces of assembly on the surface.
Checking the quality of the material - when bending, the plastic should not break
- Another quality criterion is the bending test of the plastic. To do this, it is necessary to bend and unbend the corner of the protruding mounting strip several times near the panel groove. If after these manipulations there are no traces left on its surface, and it remains intact, it means that the material for the manufacture was of high quality, and the molding technology of the parts was fully observed.
In order to calculate the required number of lining to decorate the ceiling in a particular room, you need to carry out the following calculations:
Determine the area of the ceiling and one panel.
Then the resulting size of the surface must be divided by the area of the panel - as a result, the number of elements required for installation will be obtained.
It is recommended to add 15% to the result obtained, and then this number is rounded up to the nearest whole.
To determine the length of the hardware starting profile and the ceiling cornice, two lengths and two widths of the ceiling surface are added, and then 15% of the resulting total perimeter is also added to it.
To know how many metal profiles or wooden beams are required for the installation of the frame, which will be installed around the perimeter of the ceiling and on its surface, you need to carry out the following calculation:
- You can determine the length of the frame elements installed along the perimeter in the same way as when calculating the required number of the starting profile.
- Then the size of the ceiling surface between the walls must be divided into equal lengths from 400 to 600 mm. Lines will later pass through them, along which the middle guides of the crate will be fixed - this will determine the amount of timber (metal profile), and its length will be equal to the width or length of the room, depending on the planned orientation of the finishing material.
If a timber is selected for the frame, its cross-section should be 20 × 50 mm.
In the event that a metal profile is chosen for the lathing, you can use the table to calculate the number of parts that may be required for mounting the frame:
Repairing the ceiling in the kitchen with plastic panels is a budget option for creating a practical and quite attractive exterior interior in a room where each person spends a considerable part of his life.
A kitchen is a room in which materials with specific properties must be used for finishing the ceiling surface. In particular, they must be resistant to fluctuations (and, note, constant) humidity and temperature, not to change their appearance under the influence of these negative factors, be easy to care for and safe for health. Polyvinyl chloride (PVC) panels meet the specified requirements. They make it possible to obtain an aesthetic ceiling covering with minimal installation and materials costs.
Plastic kitchen ceilings
Plastic panels differ from each other in shape, geometric dimensions and color shades. This allows you to create truly individual kitchen interiors. The most popular are products made in the format of strips 10 mm wide. This form of panels is called clapboard. It is very convenient to work with such strips. They are equipped with either the so-called polka lock or European latches (the latter are considered more reliable in operation).Soot, grease deposits and other dirt deposited on the ceiling from the plastic panels can be easily removed with soapy water. PVC-coating is allowed to be cleaned with the help of special agents produced by the modern chemical industry.
But there is one caveat. A kitchen ceiling made of mirrored or glossy PVC products cannot be washed with abrasive compounds, as there is a high risk of damage to the coating. The panels we are interested in are not afraid of water. If you get flooded by the neighbors from above, the plastic cover won't deteriorate. An important advantage of PVC finishing is the ability to hide various household communications under the ceiling, from water pipes to electrical wiring. And home craftsmen, who are accustomed to repairing their home on their own, greatly appreciate the fact that for the installation of PVC panels it is not necessary to perform laborious operations to level the ceiling. PVC products are mounted on a pre-built frame and mask even significant flaws in the ceiling surface.
High-quality finishing of the kitchen ceiling is possible only if you correctly select plastic products for this operation. It is important to know that not all PVC panels on the construction market are allowed to be used in kitchens and in living quarters in general. Some careless manufacturers strive to reduce the cost of their products as much as possible. For these purposes, they use low-quality raw materials for the manufacture of plastic lining.
The results of this pursuit of profit are deplorable. Cheap products are short-lived - their appearance deteriorates literally after a couple of years of operation. In addition, such poor quality coatings can harm your health. Getting really good PVC products is not difficult at all. Stick to two main rules:
Never buy panels that have a strong, unpleasant odor. Sellers will assure you that over time it will wear off and everything will be fine. But this is not the case. Believe me, such products are initially of poor quality and potentially unsafe.
Purchase lining with certificates of quality and compliance with Sannorms adopted in our country. In this case, the risk of buying harmful materials is reduced to zero.
Also, when choosing a plastic, other important points should be considered. Do not take canvases that have inclusions and an unevenly colored surface: color transitions within one panel must be very smooth - not striking. It is undesirable to install too soft and thin PVC products in the kitchen. Be sure to pay attention to the edges of the lining. They should not have roughness (even very small ones). The presence of such significantly complicates the process of installing the ceiling and does not allow the creation of integral structures.
If you want to check the quality of the plastic, simply squeeze the panel offered to you with two fingers of your hand (press hard enough). The durable material should not break or crack. Only slight deformation may appear on its surface. We will not give special recommendations regarding the choice of the appearance of plastic panels. It seems that you yourself can decide what kind of ceiling made of PVC panels you want to see in your kitchen. There will be no real problems here. The shops have canvases for every taste. If you wish, it is easy to purchase any lining - leather, natural wood, ceramics, steel, bamboo.
Fans of original interiors can be advised to pay special attention to the increasingly popular translucent and mirror coatings. With their help, it will be very easy to radically transform your kitchen. When choosing a plastic lining, do not forget about the main thing - your ceiling should be in harmony with the general style of the kitchen. Another little tip. Many experts say that dark ceiling surfaces in kitchens do not look their best.It is much wiser to use light and light panels - beige, dark blue, pastel, to decorate this room. These shades expand (visually) the room and create a positive atmosphere in it.
VIDEO
To decorate the ceiling with plastic, you need to purchase PVC panels in the right amount. Standard products have a length of 2.7–3, m, a width of 0.25–0.5 m and a thickness of 5 to 10 mm (remember that it is advisable to choose wider and thicker products). It is not difficult to determine the required amount of material. Measure the area of the ceiling surface and divide it by the area of one PVC sheet (the last value is on the packaging of the panels). And then add another 15 percent of the material to the resulting number. The surplus will be used for trimming and scrap at work.
We will install the panels on the frame. For its manufacture, you will need rigid metal (marking - UD), which are mounted around the perimeter of the room, and light (CD) profiles, which function as transverse load-bearing elements. Their number is calculated as follows. Draw on a scale a diagram of the ceiling surface (use a checkered notebook sheet), put all the necessary profiles on the drawing (take the distance between the transverse strips about 0.6 m). Count how many profiles you need in total. Immediately, you should calculate the number of self-tapping screws with which PVC products will be fixed, as well as dowels (they are needed to install rigid frame elements).
For every 0.5 m of the length of the plastic product, take 1 self-tapping screw, and for the same length of the profile - 1 dowel. If you want to make a skeleton for plastic from wood, it is better to use 6 mm staples instead of universal screws. Then decide on the required number of skirting boards (they are produced in lengths of 3 meters), purchase materials for the construction of a metal frame (mounting angles and parts), prepare the simplest working tool (electric drill, hacksaw for metal, screwdriver, square, level, pliers, knife, hammer, stapler and staples). You are all set to get started.
Let's figure it out directly with how to make a plastic ceiling in the kitchen. First you need to build a skeleton for a PVC ceiling covering. Let's say right away that we recommend making a frame from metal elements. The wooden lathing in the kitchen will not last long. No matter what special means you process the wood, it will deteriorate quite quickly due to the high humidity in the room where you prepare food every day. And then you have to do all the installation work again.
Installation of the frame for the installation of panels
The frame is made according to the following scheme:
Mark with a building level (water tubular device) the position of the lower part of the skeleton. In the middle of the kitchen and in its corners, place marks according to the standard method, using a chokline or a cord rolled in blue.
Mount the lower part of the UD profiles according to the mark. Maintain the distance between the lower level of the batten and the main ceiling surface at least 25 cm. If the distance is made less, you will not be able to install profiles without additional undercutting of the ceiling.
Fix the CD profiles to the U-shaped mounts. The distance between the crossbars, as you remember, should be about 60–70 cm. You can put profiles more often. Then the structure will be much more reliable and durable. Fasten the metal strips with flea beetles - special metal self-tapping screws. If using wood blocks, use 2.5 cm wood screws.
After installing all the profiles, you need to level them. This is easy to do using a strong thread. Just pull it between the profiles, and you will see whether the installation work has been done well or not. Align the structure if necessary.
There are mere trifles left - to install a plastic sheet.You need to cut the panels so that their length is 5 mm less than the distance between the kitchen walls, and then follow these steps. First, fix the fastening strips to the profiles, insert the skirting boards, cut to a predetermined length, into the existing grooves. Then slide the very first plastic panel into the gap between the fastener and the skirting board, attach it to the profiles with screws. And insert all subsequent PVC products into the groove of the previous ones and fix them with a crate with self-tapping screws.
VIDEO
Sections on the ceiling where heating pipes or other communications are laid are easy to get around. Cut out the required cross-section holes in the PVC panels and continue the installation further. Before installation, the last piece of the canvas should be cut to the required size from the side of their mounting part. And then push it into place (between the profile and the strip) and fix it in the groove of the penultimate PVC product. You just have to mount the last skirting board and cover the mounting strips with a plastic baguette. Finishing completed!
When the renovation of the kitchen begins, the question arises of the equipment of the ceiling. Many people prefer to finish it with plastic. Let's consider what the advantages and disadvantages of a plastic ceiling are, and whether it is possible to install it yourself without involving specialists.
The ceiling made of plastic panels in the kitchen looks quite aesthetically pleasing.
Plastic ceiling in white looks unobtrusive, without attracting too much attention
1 Features of plastic panels
1.1 Advantages of panels
1.2 Material disadvantages
2 How to choose panels
2.1 Quality comes first!
2.2 Calculation of the required amount of material
3 How to make the correct ceiling decoration with plastic panels
4 Photos and videos of kitchens with ceilings made of plastic panels
4.1 Photo gallery
4.2 How to make a ceiling from PVC panels
Plastic panels are a specific material that has many advantages, but also has a number of significant disadvantages. That is why it evokes so many reviews that are completely opposite to each other.
This is what standard PVC panels look like.
Example of finishing the ceiling with plastic panels
The advantages of plastic panels include:
low price. Finishing the ceiling with plastic panels will be much cheaper than tiled or stretch counterparts. But at the same time, cheapness does not mean that the panels have a cheap appearance. Having correctly selected the panels, it will be possible to decorate any kitchen;
ease of installation. It takes a professional no more than 3 hours to install panels in a kitchen in a small house with an area of 6 m2. Of course, if you are a beginner in the field of construction, then it will take more time, but in any case, you will have time to complete the installation in 1 day;
moisture resistance. Plastic is not afraid of water, so this material is ideal for installation in places where the air humidity is constantly high: in the kitchen, in the bathroom;
ease of care. The plastic can be wiped off with a regular damp cloth. True, soot quickly accumulates on the surface, so cleaning should be done constantly.
For better protection of the ceiling from soot and grease, install a high-quality hood
The modern building materials market offers a wide selection of ceiling panels
As for the shortcomings, they are also present:
not very cozy appearance. Plastic is usually sheathed in offices, so it is associated with the office character of the premises;
over time, colored panels will fade and whites will turn yellow. Replacing the ceiling will be required in about 5 years;
after a few years, seams appear on the surface of the ceiling. This is due to the constant changes in temperature and humidity, from which the plastic gradually deforms.
Over the years, the ceiling may turn a little yellow
So, plastic on the ceiling may be present, but as a fairly budget option.
Not all plastic panels are created equal. They differ not only in color, but also in quality, therefore, when making a purchase, it is important not to make a mistake.
The range of plastic panels is wide enough
Low-quality panels will not only last much less, but also delay the process of their installation. Choosing panels:
Video (click to play).
Inspect the evenness of the panels and the quality of their staining. The color must be uniform and the panels from the same batch must be the same. The slightest difference in tones on the ceiling will become very noticeable and spoil the whole impression of it;
Each panel should be smooth. On the inside there are stiffeners, which should be invisible from the outside;
The outer wall should be as thick and stiff as possible;
Check the quality of the connection between the panels. To do this, combine several pieces into a single whole. See if gaps have formed, how easy it was to connect them;
Press down on the plastic with your fingers. There should be no dents on it;
Check the panel for bending. Bend it several times. The material should not crack and bend marks should not remain on it. Choose quality materials - and the ceiling will serve you for many years
When choosing panels, keep in mind that they differ in production technology:
the simplest option is pure white material;
the most popular are panels on which the image is applied using thermal film;
the presence of complex ornaments indicates that it was applied not on a special machine using the direct printing method. This is the most expensive option.
Before starting work, it is necessary not only to choose the material, but also to determine its quantity. Panels usually have the following parameters:
width 25-59 cm;
length 2.7 - 3 m;
thickness - up to 1 cm.
First you need to calculate the thickness of the profile. Draw the future design on paper. When calculating, adhere to the rule that the distance between the profiles should be approximately 60 cm.
As for the quality of the profile, a more reliable UD profile is needed around the perimeter, the rest of the profile can be of the CD brand.
The UD profile is more powerful and reliable than the CD profile
Now count the total number of screws and add 10% to the stock.
The skirting board is 3 m long. For the number of skirting boards measure the perimeter of the ceiling and divide it by 3. As a result, you will get the required quantity.
Sometimes, in order to speed up the process of assembling a structure, some builders use brackets instead of self-tapping screws and replace the profile with bars. Keep in mind that wood reduces the quality of the structure, in addition, it must be treated with a special antiseptic.
Calculate the amount of materials you need in advance
The technology of finishing the ceiling with plastic panels includes six main stages:
First, a frame should be made, on which the panels will subsequently be attached.
The wiring for future luminaires must be removed even before the installation of the ceiling.
Attach one panel to the other as tightly as possible and very carefully so as not to damage the material
The skirting board should be trimmed straight.
After finishing work, remove any glue remaining
So, plastic ceilings are often used to decorate the ceiling in the kitchen. They are very easy to install, and therefore everyone can carry out the installation work. If installed correctly, they will serve you for years to come. In addition, in the event of a need to restore individual parts, replacing individual panels is a snap.
The color of the panels makes the seams on the ceiling almost invisible
Multi-colored panels create a unique ceiling design
With a little imagination, you can create an interesting design.
It may seem that we have a stretch ceiling in front of us, since the seams between the panels are almost invisible
Seams become more visible if they are perpendicular to the window
