In detail: do-it-yourself seat burn-through repair from a real master for the site my.housecope.com.
Repairing the car upholstery in the event of interior restoration work is almost a priority task, since driving a car on a faulty seat threatens not only with lower back pain, but also with a potential accident. Changing upholstery with your own hands can save you a lot of money. True, in some cases you will have to tinker.
The vehicle interior is constantly exposed to various influences. Drivers often smoke while driving, which often results in cigarettes or their coals falling on the upholstery. Passengers can be children with a special talent for dirtying everything around. In addition, the upholstery can be damaged when transporting bulky items.
Car seat upholstery repair is not considered the most difficult type of vehicle maintenance work, so most motorists prefer to solve this problem on their own.
The car interior is subject to regular maintenance, since, in fact, it is the face of its interior decoration. If it was decided to restore the upholstery with your own hands, first of all, you need to be patient and try to increase your level of responsibility. For repair work of this type, certain tools and materials will be required. The material is selected depending on the fabric with which the seats in the vehicle are upholstered. The main tool will be a screwdriver, used to unscrew most of the fasteners on which the trim is installed in the cabin.
Close attention should be paid to the repair of the driver's seat, because it is the most important thing in the car. The more comfortable the driver feels, the safer he is on the road.
Video (click to play).
Repair of burn-throughs on car seats, first of all, means dismantling the seats. First, the car seat is disassembled by unscrewing the bolts that secure the seat to the floor. After that, the electrical connectors are disconnected.
The second step is to remove the old upholstery. To make it easier for yourself, bend the fasteners on the back of the chair and free the edge from the internal structures.
After removing the fastening structures, the cover is removed from the seat. It is worth noting that this process requires some effort, as the inner cushions can make it difficult to pull the cover down.
Car upholstery repair can be started following the successful dismantling of the structure. When restoring the upholstery, the manufacturer's instructions must be followed. During the repair, it is recommended to use exactly those materials that make up the vehicle interior. Here it is better not to save on the price - the avaricious pays twice.
Repairing leather car seats is rightfully considered the most difficult type of work, since it requires the greatest amount of materials and efforts. The materials used are:
First of all, the irregularities are sanded with a sandpaper, after which a thin plastic mesh is applied in an even layer, filled with liquid skin. After completing these steps, you must wait until the repair material dries up, and only then put the car into operation. Car seat leather repairs may take longer than cloth repairs, but the exterior will be pleasing to the eye for a long time.
Note that if it becomes necessary to restore a chair equipped with a heating system, then after disconnecting the loops, the on-board computer will give an error that cannot be eliminated with your own hands. In such cases, it is recommended to contact a specialist.
The repair of the fabric upholstery of the car seats is carried out in two stages, the first of which is the application of the patch. Before repairing, special attention must be paid to the choice of fabric - it must match the color of the car interior. It is also recommended to stock up on a repair kit. To restore the seat, a patch is cut out in the shape of the affected area, and a thin layer of special glue is applied to the gluing site, on which a cut piece of cloth is applied.
The second stage - heat treatment will help to eliminate irregularities at the edges. A heat-resistant film is fixed on the restored area, which is ironed with a heated iron. The result of these operations, as a rule, is a perfectly flat upholstery, which, with careful use, will last for many years.
If a rubbed hole has formed on the seat, then repair the fabric car seats as follows. First, you need to carefully trim the loose edges of the upholstery, and also clean and degrease the surface to be repaired. Next, you should moisten the upholstery and let it dry a little. This is followed by the process of preparing the repair material - it must be clean and free of foreign particles. Then the patch is glued and heat treated.
One of the most important points in the restoration of a car seat is to keep clean those areas of the seat that have a satisfactory appearance. To ensure that the repaired part does not differ from the original material, the adhesive should be applied as carefully as possible. In addition, the adhesive must not be allowed to extend beyond the repair area by more than one millimeter. For this, a piece is usually used, along the edges of which a border is drawn with chalk, due to which there are no difficulties with the exact application of glue.
Read here how to repair the trunk lock of a car with your own hands. The principles of bumper repair without special tools can be found here.
Repair of burned-out car seats is carried out using a specific chemical composition. The cleaned surface is filled in layers until the flaw is completely closed. This mixture can be purchased at many auto parts stores. It is worth noting that special attention should be paid to the color and structure of the composition, so that the subsequently restored area does not catch the eye. If velor seats are installed in the car, then the top layer of the mixture should be covered with fibers that imitate pile.
When repairing burn-throughs on leather seats of a car, the hole should also be filled with a chemical composition, and for shine, a special gel should be applied on top, thanks to which the chair will regain its former gloss. The final stage is painting over the restored surface.
VIDEO
Smoking in the car is not a good idea, but sometimes it is difficult to resist this addiction.
Firstly, smoking in the car is simply dangerous due to the fact that it is distracting, a person relaxes, acrid cigarette smoke can get into the eyes and at a critical moment a cigarette can lead to disastrous consequences. The second unpleasant moment is the side effects of the well-known addiction - not very pleasant residual smell of tobacco in the car, ash lying everywhere and, most unpleasant, burnt places.
A coal of tobacco can fall on the seat upholstery, you can accidentally wave your hand and put out your cigarette on the front pillar, some particularly lucky comrades even burn the ceiling!
What to do in this case? After all, a burned-out seat is not at all aesthetically pleasing.For many people, the interior of a car is a kind of visiting card. In addition to the appearance of the car, the second thing that almost any person draws on is the neatness of the car's interior.
The burnt hole must be repaired. There are three ways. The first - high-quality, but costly - will turn to specialized services offering services for restoring the original type of car.
The second is less costly, but much more complicated, to purchase a kit for upholstery repair.
This path is different in that it will send you to a professional car service with a probability of 80%. Without certain skills, it will not be easy to make high-quality repairs on your own with the help.
Fortunately, there is a third option. It only requires accuracy, a minimal set of tools that you can find at home and a minimum of time. Nevertheless, the result will pleasantly surprise you!
Required tool:
Restoring the burnt upholstery of the seat
In an inconspicuous place, for example, at the bottom of the seat, take a razor and shave off the required amount of upholstery fibers.
Collect the fibers in a small container. The fibers of the upholstery material will look like plain fluff.
Fill the cigarette burn hole halfway with glue
Using tweezers, scribble the extracted material onto the glue. Don't tamp it!
Reapply a thin layer of adhesive over the fibers. More accurate! Do not drop into undamaged areas.
Using tweezers, lay in some more fibers until the hole is completely filled with them.
VIDEO
Take a piece of any thick fabric. We will use it as a substrate. Cut out a rectangular patch. Round the edges. This will make it easier to push it into the hole and straighten it under the upholstery.
We take fabric glue and a needle. Apply glue to the needle and process the patch as shown in the video (43 seconds). Gently apply glue so that the scarf does not move from its place.
Apply glue to the resulting backing. You can also use an external patch, as shown in the video. This does not change the essence.
The most crucial moment. Gluing a piece of fabric onto the seat upholstery. Where can I get the material for the patch? It can usually be cut from the bottom of the seat.
For a quality repair, it is very important that the pattern of the outer patch matches the overall pattern of the seat. Here you have to measure seven times, cut once. You will succeed, we believe in you!
We press the supplied scarf. We are waiting for a couple of minutes.
Ready! Your seat is like new! Congratulations!
The network of auto-repair shops "Auto-scratch" carries out repairs of burn-throughs in the interior of a car using high-quality materials. A flexible system of discounts and bonuses makes prices for services even more affordable. For your convenience, our service stations operate in different districts of Moscow and St. Petersburg. We undertake the repair of burn-throughs in the upholstery of the ceiling, seats and other surfaces of the car interior. The craftsmen will do everything necessary to remove the damage without leaving a trace.
VIDEO
Even a short contact with a red-hot object does not leave a trace for the upholstery. In addition, such damage, if not repaired in time, can grow as the car is used. The salon is becoming unusable faster and faster. The car loses its presentation and ceases to give pleasure from travel.
If you or one of your passengers burns a car seat with a cigarette, it can be expensive. If you leave the defect unattended, then over time you will have to pay for the hauling of the cabin or the manufacture of covers. To prevent this from happening, you can contact the Autoscratch company. Our specialists quickly and very accurately restore damaged areas of the cabin after a burn-through.
The technical centers located in Moscow and St. Petersburg are equipped with everything necessary to repair burn-through of car seats. A high level of service is guaranteed by:
the use of high-quality degreasing, adhesive, coloring compositions;
professional tools for stripping, gluing, heat treatment, complete restoration of upholstery. Repair of burned-out seats is carried out in such a way as to restore aesthetics to the damaged area and make it sufficiently durable. All work is done manually;
craftsmen with extensive experience in eliminating burn-throughs on the seats of SUVs, minivans, minibuses, cars of various brands;
exceptionally careful and delicate handling of vehicles left with us;
attractive prices, discounts.
To get advice on eliminating burn-throughs on seats in other parts of the car, order a free call or call us at 8 (800) 301-31-43.
During operation, not only the technical parts and mechanisms of the car wear out. The interior of the car is also exhausting its resource. Like any detail, the car interior experiences some stresses associated with the driver, passengers, transportation of various goods, which can not only cause a mechanical defect, but also often simply contaminate the interior, from which the upholstery also deteriorates.
Almost everyone can restore damaged upholstery
Almost any car owner, and even more so car enthusiasts, will clearly be upset by the appearance of any damage in the interior of their favorite car. The defect will constantly be conspicuous, as a result of which the owner will experience discomfort, passengers will begin to ask questions reminiscent of wear and tear. And in the case of the sale of the car, the buyer will have a significant opportunity to reduce the price and will be right in some way, which will not please the seller in any way.
There are several ways to solve this problem. The first method is the easiest, but also the most expensive. In this case, the owner will have to give his vehicle to a workshop for the repair and hauling of the car interior. In this case, you will have to pay for materials that are sold with a wrap, as well as for the work of a master, which can turn out to be a tidy sum.
How much is the service life of the car and how to increase it - find out here.
Also here you will learn what to do if the car engine gets very hot.
The second way is to do it yourself. All that is required in this case is materials, tools and the main condition for success is accuracy and care. Before starting the repair, it is worth rhinestone to assess the severity of the defect, as well as assess the very condition of the interior as a whole, because is it worth repairing one small hole when the entire interior is in a deplorable state.
If the owner cares about cleanliness and tidiness and nevertheless the repair makes sense, then the following procedures must be performed:
First you need to figure out the material of the upholstery. If you use leather, then it is not so easy to burn off, there will be no hole, but a trace may remain, which can be cleaned up at a sink or dry-cleaner. If the usual fabric or velor, then the situation is more complicated. First of all, you will need to clean the entire interior from dirt and dust. This procedure can be carried out on your own, if you do not want, then you can go to the car wash, where they will do everything for you. Why is it so important to wash everything first? This is due to the fact that you will need to see the color of the interior, and the place of the patched hole, and it is desirable that the color does not diverge.
To estimate the size of the hole based on the size, we will understand how much material will have to be obtained, and how difficult the repair procedure will be.
When you have decided on the size, you need to carefully cut the adhered thread along the perimeter of the hole. Accuracy and confidence of movements is very important here. Do not cut too much, this will once again increase the hole diameter. Only the burnt part needs to be cut off.This step is done so that after the repair the patched hole does not continue to cling to anything, which can cause a hole to re-form in the old place.
This step is optional, but if you suddenly do not have time to finish the repair, or there are no materials, then carefully sew up the hole with a needle and thread to avoid further growth in the diameter of the flaw. Or, this method of solving the problem is also suitable for those who do not make sense to restore one hole, because the interior is in poor condition. And to patch up, in this way, the hole will also be useful, at least now nothing will cling to the burnt tissue, and in which case the further development of the hole will be prevented.
In the case of buying a fabric, you need to choose a new fabric very accurately in terms of composition and color, if there is an opportunity to make such an acquisition, then it is excellent. If not, then you will have to extract the material and fibers of the fabric with your own hands. To do this, you need a fairly sharp tool, old machine razors or straight razors are ideal. After you have acquired a cutting tool, you need to carefully collect the fibers of the fabric, this is done on an inconspicuous part of the seat somewhere below, the main thing to remember is not to cut the fabric, but simply to collect small threads, that is, the structure itself.
If you have temporarily stitched up your defect, then it's time to expose it. Next, we take an ordinary fabric of a simple color, or white or black does not play a role here. We also purchase special glue for joining fabrics. It can be purchased at textile stores. And we glue our extracted fabric to the upholstery of the car interior from the inside of the hole. Filling the entire chair with glue is not worth it, it can ruin all efforts, you need to glue strictly the part where the hole is. You need to glue it carefully, perhaps once it will not be enough, then you will have to repeat the procedure. Now it remains to wait until everything is dry.
Now you need to cut off a piece of purchased fabric, or collect all the fibers obtained earlier. Then fill our hole and the fabric glued to it from the inside with the same glue. Then carefully insert a new cloth, or use fibers to fill the hole. In the case of using the extracted material, you need to fill in all the problems so that the pasted fabric is not visible. Then we wait until everything dries up, and repeat the procedures again, only if we used fiber from the salon.
In general, the burn-through repair can be considered complete. This method of eliminating the "burn" is suitable not only for restoring seats, but also for removing cuts and holes in the ceiling of the car, door cards and various items treated with fabric. The procedure itself is simple, such manipulations can be performed by every neat and attentive person.
There are many more ways to rehabilitate the appearance of the salon, but perhaps they will be more difficult. Such methods include the use of more special glue or solution, as well as the use of paint, the tone of which will have to be tormented to match the main color. Such methods are more used by professionals, so it is better they, thus, repair flaws.
Repairing a burned-out car seat is not particularly difficult. Almost everyone can do it.
VIDEO
As you can see, everything is quite simple. If you care about your car, then this article will be very useful to you. Using the advice above, you can easily eliminate some minor defects without the help of specialists on your own. Also, after the repair, if you want to additionally save the state of your interior, you can purchase special covers for your seats, this will additionally protect them from outside influences, thereby prolonging their life and good condition.
Today, the car is no longer just a means of transportation and has become perhaps the only place where we can feel complete freedom: listen to our favorite music at full volume, chat with friends without witnesses, calmly smoke a cigarette without fear of being fined for smoking in a public place. But as they say, you have to pay for the pleasure and the payback catches up with us in the form of burned seats. Therefore, in this article, we decided to share a way to restore the trim of the passenger compartment seats with our own hands.
We repair burn-throughs on car seats
For this purpose, we need a special kit, otherwise called a repair kit, but in Russia, the restoration of seat upholstery by a local method is not yet very common. Such a procedure can most likely be ordered in specialized workshops, but if you want to do the repair yourself, then you will most likely have to order the repair kit from abroad. The local planking repair kit includes the following items:
- colored, sheared microfiber, imitating pile;
Work description
- we clean the edges of the burn-through with a fine sandpaper, then with miniature scissors from the set, carefully and slowly cut the edge around it;
- then we lift the edges of the fabric around the burn-through with tweezers so that you can put a special patch from the material included in the kit under them (cut out the patch of the required size and place it under the edges of the burn-through with tweezers);
The jewelry work is over, now it's time for color. In our case, the burn-through is on the velor upholstery, so we need a sheared microfiber, which is in the set, in different jars and has different colors.
We select a microfiber that matches the color of the surface to be repaired, if the set lacks the desired color, we try to get it by mixing villi of different shades, but so that the color of the villi is a little darker, because after adding glue, the mixture will become a little lighter.
The next step is to add special glue to the microfiber fibers. We do all this on a special tray. The proportion is about 70 to 30. Stir everything with a spatula until a homogeneous mass is obtained and spread this mass on the prepared patch in an even layer.
Advice: try not to disturb the proportions, because if the glue is more than the required amount, the restored surface will shine and shine, but if there is not enough glue, the composition will not adhere well.
We warm up the iron to a temperature of 170 degrees, sprinkle the burn-through with clean microfiber without glue, put on top of a special cloth from the set and iron our construction through it with an iron for several seconds.
After heat treatment, the repair mixture may sag somewhat, therefore, if necessary, the entire procedure described above should be repeated. At the end of the work, we leave everything to dry for several hours, after which we will treat this place with a special protective spray from the kit and go over it with a slightly special brush.
The burn-through repair work is over, the result is beyond praise.
VIDEO
P.S. It turned out superb. I don't know how I guessed with the color, but you can only see the repair from a certain angle. Not striking.
Forum>
Has anyone tried to get rid of the hole himself in relation to the bright interior of a right-handed Colt?
Hurry, the time of the action is limited, please call:
Techservice Leader Car has been restoring seat upholstery for over 15 years. We use high-quality modern equipment, so we can guarantee you a high-quality service. Restoration of burned-out seats from 500 rubles.
Our company offers a car seat and interior repair service. Car seats are heavily loaded and can be damaged by a cigarette, or contaminated with food or drinks at any time. Of course, it is best to alter the seats, but it is often much cheaper to fix a local defect, this will help save money. We can change the upholstery of crumpled seats or fix holes in the upholstery. The cost of repair work depends on the amount of work required.
Saving time. Repair of seats can be done in a few days or even hours, when it can take weeks to wait for new seats or covers.
Saving finance. When repairing the upholstery, it is not possible to replace the entire cover, but only its individual segments. At the same time, neither the quality nor the type of upholstery material after restoration is inferior to the original analogue, and the repair itself is several times cheaper than a new purchase.
You can order a car seat repair service in our company. Our craftsmen will efficiently and promptly eliminate any damage to the seats of your car at quite reasonable prices.
Appreciate the professionalism of the specialists of the AMD plus network of detailing centers and the result of their work on the repair of burn-throughs. We have prepared a large portfolio for you, in which we have collected photos of the upholstery of the car's interior before and after removing burn-throughs ↓
Burns and traces of cigarettes inside a car are a common defect. Fortunately, thanks to modern technologies in the field of repair and restoration in the network of AMD plus detailing centers in Moscow, it is possible to quickly and inexpensively eliminate this annoying shortcoming in the leather, fabric and plastic elements of your salon.
Experienced specialists of one of the “AMD plus” studios will repair burn-throughs and eliminate cigarette marks quickly and professionally. All repair and restoration work is carried out using proven high quality equipment and materials. We guarantee accurate order fulfillment and excellent results!
For you, we have compiled a popular and useful video on removing burns on skin and fabric, which was prepared by the specialists of the AMD plus detailing centers network in Moscow! Now you can watch all the brightest thematic videos of the studios at once from the service page ↓
Smoking in the car is not a good idea, but sometimes it is difficult to resist. Firstly, smoking in the car is simply dangerous due to the fact that it is distracting, a person relaxes, acrid cigarette smoke can get into the eyes and at a critical moment a cigarette can lead to disastrous consequences. The second unpleasant moment is the side effects of a well-known bad habit - not a very pleasant residual smell of tobacco in the car, ash lying everywhere and, most unpleasant, burnt places.
A coal of tobacco can fall on the seat upholstery, you can accidentally wave your hand and put out your cigarette on the front pillar, some particularly lucky comrades even burn the ceiling!
What to do in this case? After all, a burned-out seat is not at all aesthetically pleasing. For many people, the interior of a car is a kind of visiting card. In addition to the appearance of the car, the second thing that almost any person draws on is the neatness of the car's interior.
The burnt hole must be repaired. There are three ways. The first - high-quality, but costly - will turn to specialized services offering services for restoring the original type of car.
The second is less costly, but much more complicated, to purchase a kit for upholstery repair.
This path is different in that it will send you to a professional car service with a probability of 80%. Without certain skills, it will not be easy to make high-quality repairs on your own with the help.
Fortunately, there is a third option. It only requires accuracy, a minimal set of tools that you can find at home and a minimum of time. Nevertheless, the result will pleasantly surprise you!
Required tool:
Restoring the burnt upholstery of the seat
In an inconspicuous place, for example, at the bottom of the seat, take a razor and shave off the required amount of upholstery fibers.
Collect the fibers in a small container. The fibers of the upholstery material will look like plain fluff.
Fill the cigarette burn hole halfway with glue
Using tweezers, scribble the extracted material onto the glue. Don't tamp it!
Reapply a thin layer of adhesive over the fibers. More accurate! Do not drop into undamaged areas.
Using tweezers, lay in some more fibers until the hole is completely filled with them.
VIDEO
Take a piece of any thick fabric. We will use it as a substrate. Cut out a rectangular patch. Round the edges. This will make it easier to push it into the hole and straighten it under the upholstery.
We take fabric glue and a needle. Apply glue to the needle and process the patch as shown in the video (43 seconds). Gently apply glue so that the scarf does not move from its place.
Apply glue to the resulting backing. You can also use an external patch, as shown in the video. This does not change the essence.
The most crucial moment. Gluing a piece of fabric onto the seat upholstery. Where can I get the material for the patch? It can usually be cut from the bottom of the seat.
For a quality repair, it is very important that the pattern of the outer patch matches the overall pattern of the seat. Here you have to measure seven times, cut once. You will succeed, we believe in you!
We press the supplied scarf. We are waiting for a couple of minutes.
Ready! Your seat is like new! Congratulations!
The authorities began an implacable fight against smokers. The editorial board of the "GAI" magazine turned out to be much more tolerant. In our opinion, a car is not only a means of transportation. The car, as a rule, is also a place of our freedom, where we can indulge in vicious passions in full: listen to our favorite music at full volume, chat with friends and girlfriends without extra ears, smoke a cigarette, and everything else ... Therefore, we decided to fight not with smoking, but with its consequences. Olga Medvedeva, Sales Director of the GAI magazine, mastered the technology of reanimating the upholstery with a burnt cigarette in one of the city's car wash complexes.
Smoke break before work
This lesson turned out to be the most unusual one we have ever been taught. Firstly, the co-founder of the car wash complex Semyon Syskov, who personally supervised the process, gave me maximum freedom of action. Secondly, at all stages of training, he gave extremely positive assessments, accompanying my actions with the words "excellent", "excellent result", "I like it." And he also allowed experimenting, convinced that any technology gives only a general theory, and every master has the right to look for suitable methods of work. And although the experiment was unsuccessful, this did not affect the final result in any way.Looking ahead, I will say that such a pedagogical approach seemed ideal to me: from the first time I managed to close up the prosecutor so that not a trace remained of it. There was only a great mood in which I stayed until the end of the working day. And this lesson began in an unusual way.
- Hello, are there any smokers? Bring a cigarette and a lighter, - Semyon greeted us, stroking the gray headrest, which he had prepared in advance for work. - We'll have a smoke before work, and at the same time we will make a burn-through in the upholstery, with which we will fight. Quite often, headrests and seats burn in cars.
The headrest was a "working material" taken from an old car, so I dealt with it mercilessly. Generally, non-combustible materials are used in cars: they are poorly flammable, but they melt well. Boldly shaking off the ash, I made a decent and rather deep hole in the headrest.
For our city (I think, for Russia as well), the technology of reanimation of burn-throughs is a relatively new service, although it has existed in the West for a long time. Maybe that's why a special set for this operation, including colored cut microfiber, pencils, scissors, tweezers, spatula, iron, spray gun, liquid and powder glue, has to be bought abroad. The domestic auto industry has nothing to be proud of yet: the production of such art sets for a motorist has not yet been established in the country.
The clock was 11:05. We timed the time to know the timing of the procedure, and got down to work.
My arts
First of all, I sand the edges of the hole. Then I carefully cut the edge with nail scissors.
After that, I lift the edges of the fabric with tweezers to tuck the patch under them. I also take the material for her from the "magic suitcase". I cut out a small square and use a pair of tweezers to tuck it under the edges of the upholstery to close the hole.
- There is nothing difficult in patching holes, - Semyon oversees the work. - Anyone can handle it, any prosecutor, in principle, can be repaired by himself, if he had pens and a desire. This is where the work of the jeweler and seamstress ends, and we begin to work as a colorist.
I take out jars of cut microfiber from the suitcase to match the color of the headrest material. There are dozens of shades and colors of them, but there is no ready-made one. Therefore, I begin to select the right one. I take a gray close to the main one as a basis and use tweezers to put the villi into a glass jar. I add a little dark gray to it, then more black. I close the jar and mix with a spray bottle. The color turned out to be close, but something is missing in it.
- In the native fabric there is a little blue, if we add a little gray with a bluish tint, it will be just right, - Semyon unobtrusively prompts, but he does not touch the jars himself. Today I am given complete independence.
All this resembles the work of a master in the selection of car enamel - once I was already mastering this profession. By the way, in the car wash complex, this is exactly what professional colorists are doing. Only in the computerized selection of paint are specially developed color formulas used, paint is added by grams, but here you have to mix everything by eye.
But my eyes did not seem to fail me. I pour the mixture onto a plastic tray, still add liquid glue in a ratio of 70 to 30 by eye, mix until smooth and spread the mixture on a patch. And only then it becomes clear that I made two mistakes. First, after adding the glue, the mixture became lighter than the main fabric of the upholstery. And I also saved - I have no material left for the second layer, which is prepared from a mixture of sheared pile and powder glue.
Repetition is the mother of learning
- So, we will have to do the coloring again and make another portion. Not scary, repetition is the mother of learning.While according to the technology the first layer will dry for 15 minutes, we will just do everything.
Again I start mixing the villi. Taking into account the mistakes, I add more dark color. Of course, I'm not a professional colorist who finds the right combination at a moment's notice. But soon another portion is ready. It must be thoroughly mixed with powder glue in the same proportion. There are subtleties here. If you overdo it with glue, the surface will start to shine, if you don't report it, it won't hold well.
The villi do not mix well with the powder, and Semyon and I decide to move away from the technology and experiment: I put everything in a jar and mix it with a spray bottle. But the experiment failed: it turns out that the powder glue settles on the glass. Therefore, I add a little more glue, mix with a spatula and spread it in an even layer in the place of the prosecutor. I take on an iron heated to 170 degrees, which needs to "smooth" the surface, but Semyon stops. It turns out that on top of the second layer, you also need to spray a clean microfiber mixture without glue.
Finally, through a special cloth I iron the place of the prosecutor. Here, too, there are secrets - how many times and for how many seconds you need to hold the iron, but let it remain my little secret.
When everything was ready, I already called to evaluate the quality of the work of the main critic - our photographer, a graduate of an art school and an architectural institute. But then it turned out that under the iron the mixture thickened and settled. Therefore, I had to repeat this procedure again. Ready. I got into the color perfectly. But the place of the prosecutor's office shines a little.
- Glue shifted?
The clock was 12:05. The entire procedure for resuscitation of the headrest, which now looked like new, took exactly an hour, together with the correction of errors. Fast and efficient.
Video (click to play).
The material was prepared by the "GAI" magazine.
