Do-it-yourself jeans button repair

In detail: do-it-yourself repair of a button on jeans from a real master for the site my.housecope.com.

Buttons on jeans are usually made in the form of a metal rivet. This, of course, protects such a button from quick detachment, however, if such a rivet has come off, this sometimes constitutes a real problem. Not only can you not sew such a button with a needle and thread, but they often do not just come off, but literally “with meat”, which, of course, also complicates the process of repairing a denim fastener.

Learn how to return the button to its place and repair the damage to your favorite trousers - in this article!

If the button that has come off is not lost, it's already good, you can take it with you to the store to show it to the consultant and buy exactly the same one. If the button is lost, you need to measure the length and height of the buttonhole: such measurements will give you at least an approximate understanding of which button, what diameter and height you will need to acquire.

If the rivet button just flew off, without damaging the fabric of the jeans, and both parts of the button are available and not damaged, take the button leg, insert it into the button hole on the jeans waist (the place where it fell out). After that, you need to attach its metal hat to the leg of the button, then turn the jeans over, pressing the button hat to a horizontal hard surface, and hit the leg with a hammer, hammering it into the hat. The blow should be clearly directed, but not strong, so as not to deform or damage the button.

If the button flew off "with meat" and the fabric of the jeans belt itself is damaged, then first you need to put a patch "on the wound". Using a patch cut from a piece of denim (preferably the same as your jeans), completely cover the damaged section of the belt on both sides and sew several times on a typewriter or by hand. Then we do the manipulation with the installation of buttons-rivets on the leg on the belt.

In the event that you are unlucky with these metal buttons or you just don’t like them, you can try matching your jeans with a regular button. Correctly sewn, they hold for a rather long time, are easier to fasten and in case of an "accident" they are easy to replace. My only wish: be careful about the size when buying such a button - it must be precisely matched to the size of the buttonhole. Buttons that are too small will not keep the jeans buttoned up, especially if the model is not loose at the waist. A button that is too large will cause daily discomfort.

Good day, dear blog readers!

Despite the fact that the denim buttons themselves, and their attachment to the finished garment, are very durable, nevertheless sometimes such buttons "fail".

Video (click to play).

Most often this happens with buttons that are located on the waist line and are subject to increased stress there.

How to change a button on jeans?

1. The button is about to "break out with the meat" and fall off. And it also keeps, as they say, on parole.

2. From a button on a fixed leg, the interior of which is filled with shock-resistant plastic, a carnation fell out of its own accord from the "hard life".

4. The main part of the floating leg of the denim button has come off the additional movable part.

Here are the main types of breakage that happen with denim buttons.

5. Yeah, here's another thing! By chance, in a fabric store, you caught the eye of the unearthly beauty of a denim button. And you immediately realized that her presence on your jeans will make them more fashionable, brighter and, in general, they will become like new. But, on jeans there is an old button and is clearly not going to "retire".

However, it doesn't matter.Knowing the rules for installing jeans buttons, described in several previous articles, jeans buttons that have become unusable or unloved can be easily replaced with new ones.

I want to remind you that the easiest way is to install denim buttons with a fixed leg, on a stud with a circular notch, by hand, at home.

Therefore, when choosing a new denim button, it would be good to take this into account.

If the button does not fall out completely, and its parts that are firmly seated remain in the material, then you can remove them with side cutters.

Farther. We look at the state of the hole for the button. If it is not very broken, then you can install a new button in the same place. You can read how to install a denim button on a double stud here. Read about installing other types of denim buttons here.

If the hole, as they say, is torn apart, the insides stick out from it, then you need to patch it up a little with threads that match the color. And the place for the button must be moved a little further, at least 5 mm towards the narrowing of the belt volume, and a new button must be installed (as in this or this article).

But, alas, in the overwhelming majority of cases, there is no way to transfer the button to another place, although it is located very close by. Pants and so back to back.

You can, of course, use a denim button with a stud in the form of a tube. Such carnations are somewhat wider than their counterparts, all-metal, smooth and notched.

And they should fit tightly into the hole on the product left over from the previous carnation.

But what about a situation when you could not buy this kind of denim button?

This means that the hole in the material needs to be properly sewn up, leaving, all the same, a small hole for a new stud.

And install a new button in the same place. But before that, from a piece of leather, plastic or some other dense material, cut out the round pieces twice as wide as the head of the carnation and place it on the wrong side under the head of the carnation.

Thus, the head of the carnation will have additional areas to cling to the material more tightly.

Well, here, and they learned to put jeans buttons at home, and to replace those that have fallen into disrepair.

I hope that a small series of articles on denim buttons will be useful for those who "surf" the "waves" of the Internet in search of just this information.

Do you know how to cover a button with fabric? Not? Come read about it in the next article.

Bye everyone! Best regards, Milla Sidelnikova!

Figuring out how to fix a button on jeans is not as difficult as it seems at first glance. Denim trousers are usually fitted with durable metal rivets. They are able not to come off for a long time, but if the trouble still occurs, do not rush to get upset. You can repair the product at home.

First you need to assess the damage. It happens that a rivet button does not just fly off, but breaks out "with meat". As a result, a hole remains on the belt, which will need to be sewn up. To do this, cut out a small patch from a patch of denim similar in color to your trousers. We close the damaged area on both sides and sew it well. This can be done manually or on a typewriter.

If the metal rivet from the jeans is not lost and both parts are preserved, you can reuse the product. Otherwise, you will have to buy a new button to fix your pants. They are inexpensive and are sold in any sewing store - consultants will always help you to find a suitable copy. The kit itself consists of a cap and a leg. The hat of the button can be one-piece or one-piece. As practice shows, the first option is preferable, since it breaks less often.

If you don't want to put rivets on your jeans, you can use a regular button that is sewn with threads. This simple option will help you fix your pants quickly and save time.But for reliability, it is still recommended to purchase a special metal rivet for jeans.

To fix a button on jeans, you will need: pliers, a hammer, a patch, a block of wood, and an awl. All manipulations should be carried out in a well-lit room. If you want to alter the button to another place, making the belt looser or tighter, cut the leg with pliers and remove it from the inside out. If there is a hole in the fabric, sew a patch there or darn it neatly.

Then follow these steps:

⦁ Determine on the waistband where the new metal button will be located. Mark it with chalk or a bar of soap.
⦁ At the attachment point, make a puncture with an awl, placing a block of wood under the material.
⦁ Stick the leg into the back of the denim.
⦁ Place the head of the button on the leg and tap it gently with a hammer.
⦁ Pull the button on the cap and make sure that it is firmly connected to the leg.

If the new metal button is too large, you will need to trim the buttonhole slightly. This can be done with a regular knife or scissors. If the button is too small, the buttonhole can be narrowed by hemming it on one side.

To remake a button on jeans, we recommend choosing a flat head rivet. There are also rounded options in stores, including those decorated with rhinestones. However, they can fall apart when tapped with a hammer, and work will have to start over. If you do not want to repair pants yourself or you do not have the necessary tools at hand in your arsenal, you can entrust this business to professionals. In the atelier, specialists will quickly mend a hole in the fabric and easily install a new metal button.

Square bag. It is better to sew bags with a so-called stitch, that is, a machine with a high.

We sew a new backpack from old jeans. I have accumulated a certain amount of those that have gone out of upo.

Super potatoes in 5 minutes! An ingenious recipe for potatoes! Only 5-10 minutes of cooking.

We sew the bag ourselves We sew the bag ourselves

BAGS (751)
Bags 3+ Patterns (16)
Cosmetic Bags (13)
Children's bags and backpacks (5)
Backpacks (4)
Wallets (29)
Bags (407)
Bags (Knitted) (33)
Bags (Ideas) (58)
Bags - 2 (139)
Jeans Bags (57)
ALL ABOUT REPAIR (142)
Home Improvement (25)
We make furniture (41)
Designs (56)
Floors (1)
Various little things (28)
VIDEO (1)
ALL ABOUT NEEDLEWORK (2063)
Applications, stencils (149)
Metal fittings (35)
Cord (3)
Beads (3)
Video master classes (105)
Everything for the kitchen (33)
Second life of old things (61)
Embroidery (28)
Ribbon embroidery (7)
We knit (techniques) (145)
Knit (patterns) (33)
We knit things (74)
We knit for home (24)
Decoupage (13)
Making flowers (145)
For luxury ladies (100)
Animals - toys (126)
Ideas for needlewomen without master classes (22)
Handicraft History (12)
Books, magazines on needlework (100)
Car mats (51)
Leather (59)
Patchwork (35)
Modeling (56)
Soap and everything related to it (8)
Total Splicing (96)
Pillows, throws, blankets (149)
Handicraft software (21)
Patchwork - Blocks (108)
Patchwork Techniques (28)
TO THE NEEDLEMAN. Pictures (1)
Handicraft trivia (160)
Craft Sites (54)
Handicraft Tricks (23)
Sewing Techniques (75)
Transformers - ideas, MK, etc. (32)
We sew for home (36)
We sew clothes (150)
We sew covers and organizers (29)
We sew, knit shoes and socks (96)
FOR US FAVORITES (669)
Hair (147)
Cosmetology (117)
Make Up (36)
Masks (93)
Our body. and its attractive parts (106)
Fito (72)
Notes to the hostess (122)
EARN? CAN! (105)
business on the internet (34)
Blogosphere (26)
how to make money on needlework (25)
About copywriting (16)
Own business (14)
COOKERY (392)
“Easy and Simple” (138)
Bakery (107)
Preservation (2)
Cooking Secrets (133)
Cakes, pastries (36)
LITERARY REVIEW (356)
Libraries and Search Engines (43)
Hooked! (Interesting articles) (87)
Music (40)
Proverbs (32)
Sites for watching movies online (44)
Poems by my sister (49)
Poems, prose. love (75)
DIARY DESIGN (567)
HTML (9)
Animashki (11)
Everything for creating pages (168)
For computer user (91)
Picture + code and Avatars (138)
Useful and interesting on the Internet (104)
Just Pictures (3)
Spacers (15)
Frames (42)
Simpashki and Komenty (20)
Diary Design Diagrams (20)
File sharing (4)
Backgrounds (8)
PRO AUTO (9)
PSYCHOLOGY (173)
Career guidance (6)
Relationship Psychology (86)
Theory (27)
Esotericism (53)
MISCELLANEOUS (38)
Online shops, auctions (20)
About Dogs (3)
PHOTOS (72)
My Sister's Works (3)
Photoshop and other programs (66)

I'm a photographerPlugin for posting photos in the user's diary. Minimum system requirements: Internet Explorer 6, Fire Fox 1.5, Opera 9.5, Safari 3.1.1 with JavaScript enabled. Maybe it will work
PostcardsA reborn catalog of postcards for all occasions
Always at handno analogues ^ _ ^ Allows to insert a panel with arbitrary Html-code into a profile. You can place banners, counters, etc. there

Nothing lasts forever under the moon, including denim buttons. The button itself is safe and sound, but the attachment point has come apart or the fastening stud has broken off, and the button has fallen out. It's good that I didn't get lost. Let's help your favorite denim button to return to its place.

Professional installation of metal fittings
Workshop addresses, professional advice and advice

Installing denim buttons manually at home using improvised means. Types of buttons for jeans

How to manually install a denim button on jeans? How to remove a button on jeans ?

Sizes (diameter) of denim buttons: 14mm, 17mm, 19mm, 20mm, 22mm, 25mm, 26mm, 30mm, 40mm. (It matters when selecting a button for a buttonhole on a product)
Depending on the type of denim button, it is installed on a special denim stud:
a) with a circular notch,

b) smooth all-metal,

c) metal smooth tubular

Denim nails made of aluminum are more suitable for manual installation, try to use only them. They are easy to process and are not much inferior in strength to steel ones.

- Types of denim buttons and how to install them.

The installation is made from the front side of the button on a metal surface.

3. Denim buttons on a broken leg

4. Denim buttons on a broken leg with a hole:

5. Buttons on a double stud:

A distinctive feature is the solid bottom of the button leg.

Which is then pierced with a double denim stud.

The carnation antennae are then folded towards each other.
The main disadvantage of this type of buttons is that one of the antennae-studs of the fastening often breaks off.
It is not difficult to install manually: With an awl we punch two holes on the back of the button.

We pierce the fabric with a nail, put a button on it and bend the tips of the nails with a narrow screwdriver inside the button.

Removing the remnants of a denim button:

A typical case. On jeans with a broken button on a broken leg.
The property of this type of buttons is to jump off the core under increased load.

Removing the remnants of a button. We remove with a side cutter or pliers in one motion.

Attention: fittings can be installed qualitatively only in an atelier or workshop on the appropriate professional equipment.

Have questions. Write, we will answer.

So, your jeans have lost on the idea of \ u200b \ u200bthe most necessary part, or rather buttons, which is called differently rivet button... Without which you simply cannot put on jeans, as they will fly off you instantly. Unless you wear suspenders in addition to jeans.

So what do you do with your favorite jeans? Throw out and take others?

But they are still wow, and you are used to them, and you are comfortable in them. So do not rush to part with them, but take your jeans to your regular Clothing repair, where you will quickly and inexpensively put a button rivet to your own delight. And if you can fix this little nuisance yourself, then the flag is in your hands.

So then read a small manual for repairing a button rivet on jeans.

By themselves, rivet buttons on jeans rarely come off. There may be several reasons for this. Either you have become thicker, or the button is of poor quality.

So, we start repairing the rivet button. For this we need three things. The rivet itself, the hammer and not crooked hands.

We take with us a torn off button and go, for example, to a store where they sell accessories and consumables for repairing clothes. There you buy the same rivet button or similar. I hope your man has a hammer at home, so you won't buy it.

Yes, and there is still a moment. If button rivet flew off without damaging the fabric on the jeans, then there will be no problems with the repair. Just take a new rivet button you bought, it consists of a leg and a hat. Insert this leg into the hole from where the old rivet button flew out. Insert the hat into it, turn over the jeans and lay the hat on a hard surface. Then you hit the leg with a hammer, thereby hammering the leg into the cap. And voila. Your favorite jeans are back in service.

Well, what if an old rivet button flew out with a piece of denim? And who ruffled you so?

Then in this case, insert only the leg for now and darn the fabric around it.

Next, do the same as described above. You can also watch the video.

That's all the repairs to restore the riveted buttons on jeans. Good luck and success in repairing your clothes.

Hello, dear readers of the cutting and sewing site my.housecope.com/wp-content/uploads/ext/1941 - "Sewing circle". The question of how to change a button on jeans is generally not worth it. Although, if you know how to remove a button from jeans, then the material in question will be relevant in this case. By the way, buttons are removed from jeans with ordinary pliers, or, more correctly, with side cutters. Moreover, it is not at all necessary to resort to brute male power. In the example, the old button is not removed from the jeans. So why and how to put a button on jeans?

The question "why" is simple. Then, so as not to suture jeans while reducing the volume of the belt and hips. It is assumed that the weight loss happened, but did not take on a frightening form. In this case, another button on the belt will not help. A radical change in the size of jeans will help. And then there is the option of voluminous hips and a narrow waist. Rather, their ratio. In this case, jeans often bulge sadly at the back at the waist. The second button will solve this problem too. Bulky hips in themselves also mean that jeans will stretch faster after washing, and will begin to slip after a couple of days.

Of course, a belt can be used when wearing jeans. But he can only make it worse, only by emphasizing this bulge, which everyone will stare at;). Many belts are found very uncomfortable and are looking for other solutions.

The proposed solution to the problem of jeans, which bulge at the waist at the back, is also as economical as possible.