Do-it-yourself repair of Vitek vacuum cleaners

Repairing vacuum cleaners, like other household appliances, is a common practice, since all appliances tend to break. The cause of breakdown is most often the wear of parts and the destruction of mechanisms. However, a breakdown of a vacuum cleaner does not always mean that you need to buy a new one, since it is quite possible to repair such equipment with your own hands.

The vacuum cleaner is rightfully considered the most popular piece of household appliances. Most housewives today can no longer imagine their life without a vacuum cleaner, since it significantly saves time and helps to keep the house clean and tidy.

See also - How Do I Pick a Good Vacuum Cleaner at an Affordable Price?

In most cases, the motor is the cause of the vacuum cleaner's failure. Such a breakdown occurs with almost all brands and models of the device, regardless of the manufacturer. By the characteristic signs and features of the device, you can diagnose a problem and try to repair the vacuum cleaner with your own hands.

• The first sign of a malfunctioning engine is a hum and the appearance of a dusty cloud during the operation of the device.
• Insufficient suction power or its complete absence indicates that the hose is out of order. Another sign that the tightness of the hose is broken is the quiet operation of the device. In addition to breakdown in the corrugation, the receiving brush can be damaged.
• Slow suction speed and a drop in operating speed can be the result of bearing failure. Proof of failure of these particular components is the periodic restoration of normal operation.
• Excessive hum during proper operation indicates that the engine is out of order. In most cases, malfunctions in the motor directly affect the suction power of the air.

See also - DIY microwave oven repair at home

Regardless of what is the cause of the malfunction, you need to know how to disassemble the vacuum cleaner in order to repair it yourself.

Repairing a vacuum cleaner with a wet cleaning function will be a little more difficult, since you will also have to work with a water pump. The main task of the pump is to supply water to the dust collector, for this reason the pump is installed at its inlet. When repairing a washing vacuum cleaner, you must pay attention to disconnecting the pump.

See also - Do-it-yourself multicooker repair

When repairing a vacuum cleaner from companies: Hoover, Vitek, Samsung, Rowenta - it is recommended to check the power cord is working properly. You can check the integrity of the cord using a multimeter. The reason for the failure of the cable most often lies in the active use of the vacuum cleaner, in which the cable is frayed, twisted and broken. If such a breakdown is confirmed, it is enough just to shorten the cable to the required length or replace it.

Vacuum cleaners of the Dyson, Miele brand have a distinctive feature that manifests itself in the frequent failure of the filter. Low suction power is a sign of dirty filters.

It is very important to periodically clean and rinse not only the dust container, but also the filter. Timely maintenance of the filtration system of the vacuum cleaner is the key to its long-term and high-quality operation, which primarily depends on the serviceability of the engine.

See also - How to repair an electric kettle yourself

I have a problem. I urgently need to disassemble the Vitek vacuum cleaner because it began to work poorly, and sometimes it does not work at all. Tell me how to disassemble it correctly.

I can help you with this problem.In order to disassemble it, you first need to remove the cover. To do this, you need to unhook it on both sides, it is not very difficult. After that, there are 8 screws that need to be unscrewed. After that, see what is wrong there, because you took it apart.

My Samsung vacuum cleaner started to work poorly. Tell me how to do it right ...

... the cord and hose of the vacuum cleaner is unscrewed, the metal is disassembled ...

How to disassemble the vitek vt-1829r vacuum cleaner

I will describe how I disassembled A vacuum cleaner Vitek VT-1825 Storm 2000W ... I must say right away that it was not easy to do. Obviously, the first thing I did was to remove the transparent plastic dust container with a filter. Then he unscrewed all the screws that he saw. Next (the most difficult thing) took off the lid. The cover is the part on which the power switch of the vacuum cleaner is. To remove this cover, you need to remove the on / off buttons for the vacuum cleaner and the cord winding. You will need two thin and sturdy screwdrivers here. The button has four latches, like the button, they are plastic, so there is a high probability that when removed, several latches may break off. The button is much easier to put on during assembly than to remove later. After the buttons were removed, unscrew the screws that were hidden under them. The case was almost removed, but something was still holding it. There is a small cover in the body, which opens completely when the cover of the vacuum cleaner is removed) I forged this cover with a screwdriver and found a screw. You need a fairly long Phillips screwdriver to remove this screw. He unscrewed the screw, removed the case.

I also have a vacuum cleaner Vitek VT-1825 Storm 2000W vacuum cleaner, I disassembled it, but did not understand where the small square rubber band fell out from, no one knows where it came from?

how to disassemble a telescopic tube of a vacuum cleaner

The house has a digital 2000w vacuum cleaner, how to disassemble it and make repairs?

Hello. The digital 2000w vacuum cleaner can be disassembled with a screwdriver, and repaired, first it will be determined what has broken, then only act.

Whoever repairs a vacuum cleaner like Vitek, it broke down, something doesn't pull anything.

how to disassemble the electric motor of the VITEK Storm 2000w vacuum cleaner

It is not easy to disassemble the electric motor of the VITEK Storm 2000w vacuum cleaner, I completely agree with you. Try to find a thin screwdriver and detach the case, most likely there is a sealant. See the diagram, if there is one.

the main thing is for the engine to work, and then it's all a matter of skill. By the way, thanks to the person who prompted him to write above how to disassemble it. I didn't break the latches on the buttons. But it was hard. Sorry for the mistakes in the text. Who will understand that fellow.

The vacuum cleaner is excellent, I blow out the filter at work 10 atm, sometimes I wash it. Everything is spoiled only by the rear wheels, for a long time I could not understand where the small pieces of plastic came from during cleaning, later the rubber bands from the wheels began to slip and the source of this crumb became visible. , while lying down, push through a six-seven-centimeter piece of two-millimeter aluminum wire, it will squeeze the latches on the other side, and on the other, squeeze it with a flat screwdriver, five seconds is business and that's it.

• 21 December 2014 18:30:46
• Reviews: 0
• Views: 3745
• 

Vacuum cleaner Vitek VT1826 - full cleaning

Troubleshooting: the suction power of the Vitek VT1826 vacuum cleaner has disappeared

1. Disable power cord the Vitek VT1826 vacuum cleaner from the power supply.

2. Remove cyclone filter

3. Unscrew top cover on the filter of the Vitek VT1826 vacuum cleaner and remove top filter .

4. Open the bottom cover, turn out the screws and remove the internal filter from the dust collection housing.

6. Wash and blow out all parts of the filter of the Vitek VT1826 vacuum cleaner looks like this:

7. When the cyclone filter of the Vitek VT1826 vacuum cleaner has been cleaned, proceed to further cleaning.

8. Inspect the body of the vacuum cleaner where engine electronic module network cord etc.

9. Find fasteners connecting frame and unscrew it.

10. Remove the top cover.

11. Under the plastic case is engine the Vitek VT1826 vacuum cleaner, which must be cleaned.

12. Unscrew the motor guard. Take it off. Take out the engine.

13. Thoroughly blow out the engine and the lower case of the Vitek VT1826 vacuum cleaner, check its operation and reassemble the Vitek VT1826 vacuum cleaner in the reverse order.All spare parts you are interested in can be purchased in our specialized home appliance repair center ... And also, if necessary, you can hand over the equipment to repair ... For the repair of large household appliances, call the master at home. All information can be provided to you by our specialists .

Regardless of the manufacturer and type of vacuum cleaner, the main difference lies in quality, power and design.

The most important thing in a vacuum cleaner is the electric motor, which creates a vacuum and, as a result, sucks dust and various particles through special filters through which only air passes.
In different types of such devices, these filters are different, and flasks and just bags and cyclone-type vacuum cleaners.

But it is the engine and, occasionally, the electronic power (rpm) control circuit that requires the most attention in this whole device.

Do-it-yourself engine repair is not difficult to carry out if the breakdown is simple and the engine is still running but you can hear a heavy engine stroke (when turned off) or the engine starts to rattle or buzz strongly, it happens that the vacuum cleaner gets very hot in a short period of time.

The heart of the vacuum cleaner, as we have already figured out, is the engine and, as a rule, the collector.
What is such an engine?
The motor is housed in a housing where the fan impeller blades are hidden. It is of the tangential type, where air is drawn in at the center and exits through the periphery and already exits through the rear filter.
The brushes in the engine are placed in special shafts made of brass, as a rule, this is ordinary carbon in the form of graphite. Over time, the brushes rub against the collector roller, their middle is ground down and they become slightly semicircular, due to which the contact area with the collector pads increases. The brushes in their shafts are pressed by springs, creating the necessary pressure of the graphite, in the process, by the robots, to the collector. The brush will work until it wears off and the spring cannot properly contact the graphite with the manifold.
It is necessary to monitor the cleanliness of the collector shaft itself, clean it from carbon deposits if necessary and remove the oxide layer to a copper sheen.

The shaft is attached to the stator by two bearings of different sizes, as a rule, this is done in order to make it easier to disassemble it. The front is usually large, and the back is smaller.

The shaft is carefully knocked out of the stator using any suitable tools. Then we look at the course of the bearings, because of the dusty robots they get clogged despite the presence of anthers. If necessary, the anthers are carefully removed with a thin screwdriver or an awl, washed with a jet of WD-pulleys, after which the balls must be lubricated, for example, with grease such as Litol-24 or EP-2, after which the boot is put in place and snaps into its grooves in the bearing itself.

To start some kind of repair or maintenance of the vacuum cleaner, you need to remove the case. Each model has its own methods.
First of all, all filters that impede access to the motor are removed, the housing screws are unscrewed, including secret ones (under the buttons, for example). Having unscrewed all the screws, you need to carefully try to disassemble the case, if this fails, take a closer look where there may still be latches or additional screws, if you do not pay attention to this, you can break the case.

Then the entire electrical installation is disconnected, as a rule, the connections are made on the connectors.
The plastic motor housing is unscrewed from the bed and the motor is then removed from its plastic housing.
In some models, it is simpler and the motor itself is fixed in the body of the vacuum cleaner in special rubber grooves-seals or screwed tightly to the general body of the vacuum cleaner.

To disassemble the engine and remove the fan impeller first of all, we will remove the front part of the casing (above the impeller).We take a thin metal object, you can use a screwdriver and gently bend it off the side of the casing so that the screwdriver goes a little into the middle, then gently push the upper part of the casing out, as a result of which the entire impeller becomes available to us.

The nut on the impeller usually has a left-hand thread (but there are exceptions) We try to unscrew it by holding the impeller with our hand, if it scrolls and in this way it is impossible to unscrew the nut, there is one great way
So .. we take a good stranded wire with a cross section of more than 1.5mm in dense rubber insulation (to prevent slipping). We push in such a wiring and wrap the collector shaft 2-3 times, turn to turn and stretch it in different directions, thereby fixing the shaft motionless.

It is most convenient to do this together, one person fixes the collector with the ends of the wire stretched to the sides, and the second unscrews the nut on the fan disk.
The method is very convenient and safe for fixing the anchor. In the same way, when reassembling, tighten the nut.

After removing the fan impeller, unscrew the housing screws; by this time, the brushes should already be removed.

Then carefully pull out the anchor, twisting the upper part slightly if necessary.

If necessary, the bearings are removed using a commercially available tool or special thread pullers. In especially severe cases, the bearing sometimes “sticks” tightly to the sleeve; a special hydraulic press is used to remove the bearings.

• bearings
• brushes
• fuse
• network wire
• no contact in the switch
• motor winding, breakage or burnout of the winding (stator or rotor)
• capacitor failure
• breakdown of the electronic circuit of the power regulator

Drop in power and suction power.
The most common cause is either a clogged filter or a defective bearing.
It is necessary to clean the filter and check the operation again, also check the operation (draft) of the vacuum cleaner without filters, since it happens that the usual cleaning of the filter does not help and it already needs to be replaced.
If the draft without filters does not give the same working draft, you will have to disassemble the vacuum cleaner, the impeller on it should easily turn with your finger without much effort. Additionally, we remove and inspect the brushes and clean the collector from carbon deposits using zero sandpaper or a piece of ordinary cloth.

In some cases, the tightness of the hose is broken, this can be both a violation of the integrity of the hose itself and the connecting pipes at the ends of the hose, the hose simply slips out of them a little.

The vacuum cleaner does not turn on.
If everything is fine with the voltage in the outlet, disassemble the vacuum cleaner and first of all inspect the fuse and the power cord, especially at the very end of the cord on the winding drum in the soldering points.
If there is a tester, we call for a contact.
The power button could break or the contact is simply broken in it, it sometimes gets clogged, again, with the help of the tester, we make sure that the button is working properly.
If all the elements have been called by the tester and the voltage comes to the engine brushes without problems, and the brushes themselves are not erased, then most likely you will have to repair the engine expensively or simply replace it, since in most cases it is more expedient to install a new motor than to repair a tired old one by rewinding.

If the vacuum cleaner worked for a long time and does not turn on then it is quite possible that the protective thermostat on the engine itself has worked as a result of overheating - in this case, there is nothing to repair, it will be enough to leave the vacuum cleaner to cool the engine.

The speed of the vacuum cleaner motor is not regulated.
The most common cause of such a malfunction is the breakdown of the triac, in which the voltage through it is not regulated but freely passes through it without any control. It is possible that this element fails, and it is possible that contact is lost on one of the legs of this element on the board.
By slightly pressing down on the speed regulator knob, you can make sure whether the regulator itself is in good working order or the contact may be broken in it and the regulator slider does not contact its site.

The vacuum cleaner emits a foreign smell and hot air.
First of all, you need to make sure that the suction inlet is not clogged, inspect the hose, check the retraction force at the inlet and whether the sound of the engine changes when you plug the inlet with your palm. In case of satisfactory operation on the part of the suction system, we can assume that the engine is malfunctioning, but most likely the brushes.

The vacuum cleaner hums and rumbles - the reason for this action is the engine, and in particular its bearings. Most likely they need additional lubrication or, if there is a large shaft around their axis, they need to be replaced with new ones.

The cord does not tighten when the button is pressed or is constantly tightened during operation - malfunction of the winding drum, perhaps the spring has burst, is weakened or, on the contrary, is too tight.
We inspect the pressure roller of the button and, if necessary, having removed the drum, we wind up or unwind the wire on the drum - changing the tension of the drum itself to the one we need.

As a rule, it is not complicated and is quite standard in most models.

Why can't a person find the videos they want on Youtube? The thing is that a person cannot come up with something new and look for it. He was out of fantasy. He has already watched a lot of various channels, and he no longer wants to watch anything (from what he watched earlier), but what to do in this situation?
In order to find a Youtube video that suits your needs, it is imperative to keep searching. The harder your search is, the better your search result will be.
Remember that you only need to find a few channels (interesting), and you can watch them for a whole week or even a month. Therefore, in the absence of imagination and unwillingness to search, you can ask your friends and acquaintances what they are looking at on Youtube. Perhaps they will suggest original vloggers that they like. You, too, may like them, and you will become their subscriber!

Online mp3 cutting is convenient
and a simple service to help you
create a musical ringtone yourself.

YouTube video converter Our online video
the converter allows you to download videos from
YouTube website in webm, mp4, 3gpp, flv, mp3 formats.

These are radio stations to choose from by country, style
and quality. Radio stations all over the world
over 1000 popular radio stations.

Live broadcast from webcams is made
absolutely free in real
time - broadcast online.

Our Online Television is more than 300 popular
TV channels to choose from, by country
and genres. Broadcasting of TV channels is free.

A great opportunity to start a new relationship
with a continuation in real life. Random video
chat (chat roulette), the audience is people from all over the world.

Do-it-yourself vacuum cleaner repair - possible breakdowns, is it worth disassembling?

All breakdowns associated with a vacuum cleaner most often relate to the operation of the engine. Regardless of the model, the motor has a blade and helps to draw in air. The filter protects the moving parts from dust, but the engine simply has no protection against vacuum. When a vacuum cleaner breaks down, many people think about fixing it on their own. This is advisable in situations where the engine is working properly, but there are problems with brushes and bearings. The motors inside the vacuum cleaner are similar to each other. Vacuum cleaners differ only in mechanical parts, devices for collecting dust, filters, hoses and housing, and the design of the brushes.

To repair, you need to disassemble

Possible problems in the operation of the vacuum cleaner, which you can fix yourself, are described in detail below in this article. But the repair begins with the fact that the vacuum cleaner should be disassembled. Initially, the case is removed: depending on the models, the methods will differ, but they are clear and simple.When the case is open, it is necessary to remove the filters that will block access to the engine.

The vacuum cleaner must be unplugged from the socket! Disconnect the electrical installation and unscrew the motor from the frame. The motor is then removed from the casing, then the fan is removed. The nut usually has a left-hand thread. The collector-cover will be located behind the fan, and under it is the electrical part.

Possible typical breakdowns:

- Brushes and bearings;
- Motor winding;
- Power wire;
- Fuse;

Sometimes a vacuum cleaner has two motors. The second is located directly on the brush, due to which the villi move. Moving air does the same job in turbo models. When cleaning the brushes, which have an additional motor, do not press hard, because the weight of the device itself is already decent.

Important! The washing vacuum cleaner, in addition to all the components described above, also has a pump that supplies water to the hose. Very often, such vacuum cleaners, due to their high cost, have a self-diagnosis system, which suggests that there is a problem. You can read about the possibility of their self-elimination in the instructions for the household appliance.

When the vacuum cleaner does not work when turned on

In such a situation, the malfunction is related to the availability of electrical power. The outlet, plug, or power cord may be defective. In rare cases, this situation indicates engine failure. To understand what caused the malfunction, it is necessary to check all the elements of the circuit: inspect them well. Wire damage can most often be seen near a plug or at the entrance to a vacuum cleaner.

If the engine is out of order, then it will be quite difficult to repair the device with your own hands. Often, even in service centers, they cannot help solve problems, and if they offer a possible repair, then it’s worth working like buying a new vacuum cleaner.

Not every housewife will be able to disassemble the vacuum cleaner even using the detailed instructions written in this article. But the husband or father, the eldest son will be able to cope with the task. Having disassembled the case and component parts of the device, you can judge how serious the problem is and whether it is possible to fix it yourself or you will have to contact a service center.

A large number of electrical appliances are used in any living space. You can easily repair vacuum cleaners with your own hands, just having a standard set of tools with you.

Regardless of the model or design of vacuum cleaners, most often any problems with this technique are associated with engine malfunctions. If the device is humming, dusty, or makes intermittent sounds during operation, this is the engine junk. At the same time, if the vacuum cleaner does not suck in debris or the pressure is insufficient for normal operation, then most likely this is a hose malfunction.

Troubleshooting:

1. When the speed and suction power drop, the most common cause is bearing failure. In this case, you can also observe a periodic restoration of the functionality of the device, that is, a temporary drop in its efficiency does not affect continuous operation; Photo - broken hose
2. If the vacuum cleaner hums, but at the same time it normally sucks up debris and dust, then the cause is a malfunction of the engine. Basically, all failures associated with weakening of power relate to the motor device;
3. If there are no loud sounds during operation, but at the same time, the vacuum cleaner does not suck in the usual amount of debris, then the tightness of the hose is broken. We draw your attention to the fact that the problem may lie both in the violation of the integrity of the corrugation, and in the breakdown of the receiving brush.

You can disassemble a standard Electrolux, Philips, Thomas or any other vacuum cleaner for repair using the following instructions:

At the same time, the maintenance of washing vacuum cleaners (Karcher - Karcher, Zelmer - Zelmer, Bork - Bork and others) is significantly complicated by the presence of a water pump.It supplies water to the dust collector and is installed on its course, therefore, in addition to the steps described above, you will also need to unscrew it.

Video: how to repair a vacuum cleaner yourself <>

Before disassembling models of Hoover, Vitek, Samsung, Rowenta (Roventa) vacuum cleaners and others for spare parts in order to get to the engine and repair it, you need to check the power cable. Due to the fact that the cord is constantly in an active state (it is pulled from room to room, is under constant tension), it wears out quickly. To check its performance, you can use the most common multimeter. After finding the place of fiber fracture, replace the faulty section or cut the cable to the required length.

If the pressure in a Dyson or Miele vacuum cleaner starts to drop noticeably during operation, the first thing to do is to check the filters. They get dirty after each use of this cleaning technique, but not every housewife cleans them as often and as thoroughly as dust collectors. Once every few months, you need not only to knock out, but also to wash from the villi. Otherwise, with each use, the vacuum cleaner will suck in less debris, and over time, quite serious engine repairs will be required due to deterioration in performance.

Photo - washing option

The operation of a standard "dry" vacuum cleaner is a tandem of two motors. One is the motor and the other is the motor that makes the brushes of the first motor work. It should be noted that in addition to the motor inside the vacuum cleaner, these same brushes and bearings can also wear out. In some models of vacuum cleaners (for example, Siemens - Siemens, Vax, Vao, Dyson), you can repair them yourself, in most others it is better to immediately take them to a service center.

After proper disassembly, replacing any broken internal part with a working one is easy. The main thing is to take into account the brand and size of the previous one. In particular, always pay attention to the material and size of old bearings.

Very interesting to read:

Hello! In this article, I will consider repairing a vacuum cleaner with my own hands. In the meantime, a little theoretical information. How does a vacuum cleaner work? And the principle is pretty simple. The vacuum cleaner has a powerful electric motor, on the shaft of which a fan is mounted. As it rotates, it creates a powerful air flow, which carries away dust and small particles. The polluted air flow enters the filter and is purified, and the purified air is returned to the room. Now there are many different vacuum cleaners for a particular task. Vacuum cleaners are divided into vertical, cylinder and combined.

In a vertical vacuum cleaner, a fan attached to one end of the motor shaft creates a stream of air that draws in dust.

The second end of the shaft is used to drive the brush roller through the belt. The bristles on the roller picks up dust from the surface to be cleaned and directs it inward following the intake air. The distance between the brush roller and the floor is adjustable, which allows cleaning various surfaces. Contaminated air passes through the fan and then enters the dust bag. It is made of breathable paper. It does not allow dust to pass through, but allows air to pass through. The efficiency of the system is high, but it has one drawback. All particles come into contact with the fan, which often leads to fan breakdown and combustion of the electric motor if it gets jammed when stones and metal objects get inside the fan.

Cylinder vacuum cleaners have a different device.

In them, the dust bag is located in front of the fan. The sucked-in air enters the bag and particles are retained in it, and the cleaned air enters the fan, passes through the electric motor housing, thereby cooling it well and then is thrown out into the outlets on the device housing.A flexible hose is attached to the air intake opening, which is supplied with a wide variety of nozzles. In case of damage to the dust bag in a vacuum cleaner of this design, an additional filter is provided, which is installed between the dust bag and the fan.

Combined vacuum cleaners were created by designers with the expectation of avoiding the disadvantages of the two types of vacuum cleaners. In these vacuum cleaners, air and dust are drawn into the brush roller compartment and further into the dust bag.

All modern vacuum cleaners are constantly being improved and equipped with various functions. Let's consider them in order.

The adjustment allows you to decrease and increase the performance of the vacuum cleaner. This is ensured by smooth regulation of the voltage on the fan motor using a small circuit on the seven-story.

When carpet or furniture is cleaned, the dust control system turns on an indicator when the dust in the air drops below a threshold.

Automatic cord rewind

The power cord of a modern vacuum cleaner is quite long, so they are equipped with a spring-loaded drum, which, when you press the cord rewind button, pulls the cord into the body of the device.

These vacuum cleaners are powered by a battery that powers the vacuum cleaner's fan motor.

This concludes the review of functions and proceeds directly to the repair of vacuum cleaners.

Poor absorption

1. Incorrect power setting ... In this case, check the position of the power control. It can stand in reduced power mode.

2. Dust bag is full ... Empty dust bag. Also remove and check the engine dust filter. If it is clogged, knock it out or wash it with soap and water and dry on a flat surface. Replace with a new one if necessary.

3. Clogged hose... Remove the hose and visually check for foreign objects accidentally caught in it during cleaning.

4. Air leaking from a semi-hermetic system ... Check the quality of the connection of the suction hose to the body of the vacuum cleaner, as well as the hose for integrity (it must not have cracks). Remove the cover and panel and check if the gaskets and seals are intact. Replace those that are torn or out of shape.

Good suction, but poor collection of debris (in upright vacuums).

1. Incorrect roller position ... Check if the height of the brush roller is set correctly to the surface to be cleaned.

2. Brush wear ... Check the length of the bristles on the roller. If the wear exceeds the norm, then replace the brush roller with a new one.

Brush roller does not rotate.

1. Torn belt ... Disassemble the vacuum cleaner and replace the belt with a new one that matches your model.

2. Seized roller bearings ... Remove the brush roller and remove the end caps. At each end, check for thread or hair on the bearings.

The smell of burnt rubber.

Belt slippage ... Check the belt tension. If it is loose, replace it with a new one. Check the bearings for ease of rotation of the brush roller. If it does not rotate smoothly, check the bearings and replace or lubricate if necessary.

The vacuum cleaner does not turn on.

1. The plug is not included in the socket ... Check if the plug is well inserted into the outlet. When working with the cord fully extended, this is often the case. Also, make sure there is voltage at the outlet.

2. No power supply ... Check the power board, you can often find a knocked out circuit breaker or blown fuses there.

3. Defective plug or fuse ... Check that the plug is connected correctly, as well as the built-in fuse, if any.

4. Open in the power cord ... It is necessary to check the power cord, for this it is necessary to disassemble the vacuum cleaner, find the place of the electrical connection of the end of the power cord and ring its veins for an open. Replace if necessary.

5. Motor overheating protection tripped ... Some models of vacuum cleaners have built-in protection against overheating of the drive.It is called a thermal fuse. The operation of this protection can be caused by clogging of the dust bag, filters, due to clogging in the air ducts. Let the vacuum cleaner cool down for half an hour, then plug it back in and check its operation. If it does not work, then the reason lies elsewhere.

6. Faulty switch ... Remove the cover from the vacuum cleaner along with the switch and carefully disconnect the wires from it. Check the switch with a tester. To each contact of the switch, attach the probe of the device in the resistance measurement mode and turn the switch on and off. If the tester does not show anything, this indicates that the switch is faulty.

7. Defective motor ... Carefully disassemble the vacuum cleaner, find and remove the electric motor with a fan. If you have not read the article on checking the motor windings, then I advise you to read it. Check the condition of the brushes on the motor. If they are badly worn, replace them with new ones. Perhaps there may be a break in the motor windings.

To check the presence of an electrical circuit in the electric motor circuit, attach the tester probes to each brush in the resistance measurement mode. If the device shows infinity, then perhaps the brushes do not adhere well to the armature collector and it is necessary to replace them with new ones. If there is a resistance tester reading of several ohms, it is necessary to make sure that the stator windings of the electric motor are in good condition. To do this, find the ends of the windings and call them with a tester. If they have an open circuit, then the electric motor needs repair. Very often the electric motor of the vacuum cleaner burns out from overheating or its winding is damaged.

Repairing the electric motor of a vacuum cleaner is quite complicated and must be carried out by a specialist. In the future, I will write an article about checking and step-by-step overhaul of collector electric motors. If you have a washing machine, you may need to repair your washing machines. So we read. I also recommend reading the posts on quartz watch repair, electric shaver repair and blender repair. Good luck with your vacuum cleaner repair! Till!