DIY Roman blind repair

In detail: do-it-yourself Roman shade repair from a real master for the site my.housecope.com.

We can safely say that the Roman blind has become one of the most popular window decoration options today. Due to its simplicity and functionality, it simultaneously provides both protection from bright sunlight and gives the interior a cozy and comfortable feeling. Stylistically, Roman blinds are suitable for most solutions from classic to minimalism, they are perfectly combined with straight curtains, with light tulle and even with ordinary blinds.

The device of such curtains is quite simple, a rectangular fabric is taken and weights are sewn into it at regular intervals, which provide uniform folds. On the reverse side, special rings are sewn through which the lifting cords pass, and a Velcro tape (in other words, Velcro) is sewn into the upper part, with which the canvas is attached to the cornice. A weighting agent is sewn into the lower part of the curtain, thanks to which the fabric rises evenly and forms correct folds.

As a rule, the curtain itself does not require repair, with the exception, perhaps, of plastic rings for cords, they come off or break over time. This is due to the fact that they are very hot in the sun, the plastic from which the rings are made becomes brittle and after a while begins to crack. For repairs, it is enough to rip off the old rings and sew new ones to the curtain.

The main problems requiring repair roman blinds, connected with the cornice on which it is installed. Eaves of this type are called lifting and are divided into two types - open and closed. It should be said right away that closed Roman cornices are more reliable and durable. They, in turn, are also manufactured in two versions: a regular curtain rod for light and medium curtains and a reinforced curtain rod for medium and heavy curtains. Open curtain rods are for medium and light curtains only.

The main problems of Roman blinds are the following:

Uneven raising and lowering of the curtain. The reason for such a breakdown is the failure of the lifting block, which will result in entanglement or even breakage of the lifting cord (cord). The repair consists either in bulkheading the eaves and eliminating the cause of tangled cords, or in replacing the lifting unit. Such a nuisance is typical for open cornices, the block itself has a latch design, which can open when the load increases or with a sharp jerk. This is not immediately noticeable and the curtain works as it should for some time, but as soon as the cord stops winding evenly, the skew of the canvas becomes immediately visible. In this situation, people begin to raise and lower the curtain even more in the hope that everything will unravel by itself, but everything turns out exactly the opposite - the cords become even more tangled. In closed eaves, this happens less often and in some cases it is enough to simply untangle the cord.

Video (click to play).

The fabric does not rise or fall, the control chain scrolls or, on the contrary, does not move. The control mechanism is clearly out of order and needs to be replaced. Likewise, this kind of malfunction is more common on a Roman blind with an open cornice, especially in the case of thick and heavy fabrics. The repair of the Roman cornice will consist in replacing the mechanism, we recommend that you immediately install a reinforced one, even if it will be more expensive, but it will last longer than usual.

The curtain rod control ball chain has broken. Usually, Roman blinds use either plastic or metal control chains.With metal, something rarely happens, but plastic over the years of regular use can break. As a rule, solid-soldered ring chains without a lock are used, in which case the cornice will require disassembly and installation of a new chain in the control mechanism. If a detachable chain with a lock was used, then all the actions are the same, but in addition the chain will need to be fixed in the lock. The simplest case is when the lock has opened, but the chain has not yet fully come out of the cornice, then it will be enough either to snap it into the old lock, or simply replace the chain lock with a new one.

For wide and heavy Roman blinds, we recommend using a single curtain rod with two reinforced controls on both sides. Such a cornice can also be called split if the shaft consists of two pieces, each of which is controlled separately.

From time to time we encounter the so-called lightweight fabric problem. When the curtain fabric is made of a very light, almost transparent tulle fabric, when the curtain is raised, folds may form in the wrong places where it was intended by the design. The tulle begins to gather in arbitrary places, and not from the bottom up. This effect is caused by the fabric "sticking" to the lifting cords due to its insufficient weight. A solution is to install an additional lower weighting agent.

Our company will gladly carry out the repair of a Roman shade, to call the master, just call us on the phone 8 (495) 508-17-20 or send a letter to the mail: with a description of the problem and photos. A repair specialist will contact you and arrange an arrival time!

Read also:
Blinds repair
Repair of horizontal blinds
Repair of vertical blinds
Repair of wooden blinds
Repair of pleats
Repair of blinds with an electric drive
Repair of light filters
Repair of roller blinds
Repair of French and Austrian curtains
Repair of cornices
Repair of eaves with an electric drive
Repair of awnings
Roller shutter repair

Curtains play an important role in the interior of any room. In addition to the fact that they protect the inhabitants of the apartment from the sun and dust, their main purpose is to decorate our lives. Since curtains usually occupy a large area - usually an entire wall - their role in creating atmosphere and style is invaluable. Today we will tell you how to make Roman and Japanese curtains with your own hands - two especially original and elegant options for window draperies.

This version of curtains for windows has been very popular lately. Roman blinds require a small amount of fabric, take up little space and fit perfectly into many interiors. It is quite possible to do it yourself, it is not difficult, but you need to know some secrets. For example, how to achieve a beautiful distribution of folds, or how to properly fasten the lace that lowers and lifts the drapery.

Read also: DIY garden wheel repair

It is very important to choose the right fabric. It should keep its shape and be tight. Therefore, you should use high quality fabrics that will not deteriorate after washing. As for the colors and patterns, it is better if they are sustained in the general color scheme of the room. But there are nuances here too: for example, the cage hides all the controversial aspects of sewing, but the strip gives them away.
How to calculate the amount of fabric? Depending on the width and height of the window, plus seam allowances, which are 2-5 cm on all sides. It is also important how the curtain is attached - on a cornice, a bar or in another way. By the way, now on sale you can find special curtain rods specifically for Roman blinds.

The search for material for a product is not all. In addition, you will need wooden or metal rods like twigs. They are needed to maintain the shape of the top and bottom edges of our curtain, as well as the transverse folds. Also, a strong cord and rings with a diameter of 1-1.5 cm are useful for the opening and closing mechanism, and a special weighting agent is used to fix the shape of the curtain.

Now you can start cutting with a light heart. Often, Roman shades are made on a lining, which is sewn immediately, tucking and hiding all the cuts. Then, from the inside out, folds are marked and covered with folds for inserting rods that set the rigidity of the product. The distance between the folds is usually at least 30 cm.

The rings are sewn on the basis of three pieces for each fold for the twig (both top and bottom curtains: right, left and middle. Cords are pulled into the rings, the end of each cord is attached to the lower ring, then the cord goes up and along the uppermost rings A total of 3 lengths of cord are needed All 3 laces should come out of one loop at the top of the curtain.

Their tails are tied together. For greater convenience, the resulting triple cord can be equipped with a retainer - an acorn, then the curtain will not go down by itself. Now you know how to sew roman shades yourself.

DIY Japanese curtains.

Only in the event that someone does not like the arrangement of the interior in the classic Western style, then he will surely like the oriental exotic version of home decoration. An interesting experience in this case will be to try to make Japanese curtains with your own hands. Its design consists of even fabrics that can be moved like the doors of a wardrobe - compartment. At night or when the bright sun hits the eyes, all the canvases can move, and in a cloudy sky, on the contrary, move apart.

Japanese curtains, or, as they are also called, Japanese panels, can be made from both light transparent and dense fabrics. Soft pastel colors - beige, pale green combined with refined white - will be preferred. Monochrome fabrics of shades of the elements of the earth from Japanese mythology are also possible - brown, blue, green. For greater authenticity, you can use fabric with traditional Japanese images - cherry blossoms, Japanese-style flowers, willow branches. Images of hieroglyphs are appropriate - painted with a special paint for fabric, printed on a machine or sewn with a cord or braid.

What is the most important thing to know if you decide to make traditional Japanese curtains with your own hands? The first point is that Japanese panels are narrow canvases 60 cm wide. This width is a prerequisite, since a special cornice is used to hang them. Now on sale there are cornices for Japanese curtains of various types. Usually they are hung on three to five-string runners, which allow the canvases to be moved either separately from each other, or simultaneously. The so-called "Connector" helps to move the canvases all together, and at the bottom they are equipped with a metal weighting agent. The second point is that there are no assemblies along the upper edge of the curtains. And the third is the ultimate brevity of the product. Accessories and any grips are missing.

First, straight strips of fabric 60 cm wide are cut out. Allowances for processing and shrinkage are added, the side seams and the bottom are processed. At the bottom, the canvas is finished with a drawstring, the allowance on the sides is not overstretched. Then the curtains are ironed, the upper edge is made up. We calculate the length of the curtain when setting up as follows: add an allowance for a special Velcro tape 1, 0-2, 0 cm to the length of the finished curtain.

So, our new curtain is ready! Now you can admire the new interior, enjoy the soft dim light and invite guests.

Thanks to its unusual appearance and unpretentious care, Roman shades have become quite popular recently.

Installation diagram of roller blinds.

Basically, they are hung on the kitchen windows, since the design of such curtains fits perfectly into the kitchen interior.

Since these are not quite ordinary curtains, but a constructive product with a certain mechanism, then, like any design, Roman shades can break.

Do not rush to immediately use emotions in this case and throw away Roman shades in the heat. Better to have them repaired.Moreover, this must be done in a timely manner, if you do not want to stay for a long time without your favorite curtains in the apartment.

So, if repairs are required, then you can do this: either send the curtains to the workshop and the master will quickly fix the curtains without any problems, or learn how to do it yourself, so as not to overpay money every time. In addition, if you know how they work, it will not be difficult to do this.

What is the fastest way to understand how Roman blinds are arranged? Of course, try to make them yourself at least once. Or at least imagine all the described technology mentally. Let's try to figure out how they are made and from what.

Sewing and assembling process of Roman blinds

What is used for sewing?

dense fabric;
lining material;
wooden twigs;
small plastic rings (2 rings for each drawstring);
nylon cord.

What is used for assembly and hanging?

a wooden strip, the length of which is equal to the length of the curtains;
hooks with screw legs;
fasteners, screws.

Please note that the width of curtains made in this style cannot be wider than 220 centimeters, otherwise the twigs in the folds will bend. Additional elements that are used to manufacture the product are prepared in advance. This is a round strong cord, Velcro, thin metal or wooden rods (twigs), a rail for fastening the curtain, rings with a diameter of one and a half centimeters and a clip to the cord.

First, the dimensions of the fabric are calculated according to the rules: they carefully measure the length and width of the existing window. 10 centimeters are added to the width of the future product, and 20 centimeters to the planned length. Then they start sewing. Velcro with loops along the entire length is sewn to the front side at the top of the canvas.

Along the entire length of the canvas, the places where the twigs will be placed are marked. They are inserted approximately every 20 centimeters of the length of the curtain. Leave 4 centimeters at the folds of the twigs. There is no margin for the hem below.

Then the fabric is folded right side inward. They are stitching along. Sew on three rings from the seamy side on each fold. Do so that three rows with rings are located along the length of the product parallel to each other.

Diagram of Roman curtains with your own hands.

The second part of the Velcro is nailed gently with small nails to the rail.

Instead of studs, a construction stapler is sometimes used. The product is applied to the mount. Thread the cord through the clip and rings. Then the rods are inserted into the folds.

Using the screws, fasten the holder for the curtain. A self-made Roman blind is hung on it.

Video (click to play).

To prevent the curtains from falling:

A triple cord is passed through a ring at the bottom of the curtains, which is sewn specifically for this purpose. The cord is fixed with clothing clips. Press down on the latch while lifting the curtain. They are released when they are brought to the desired height. The curtain is thus obtained securely in place.

For a secure fit, curtain hooks are sometimes used, on which the remaining ends of the cord are wound.

Absolutely any fabric is suitable for sewing: both thin and denser. However, it is much easier to work with densely textured material.

It is not advised to purchase material with large ornaments for Roman blinds, since the deformed pattern on the assembled product will look ugly.

A fabric with stripes for such a curtain is perfect. In the open state, the folds formed on the curtains will not create any deformation.

So, knowing how to sew and assemble curtains, repairing them will not cause panic.

The structure of an adjustable mechanism in such a product does not break so often, because it is simple in itself.

Much more often, repairs are required by moving elements that make up the lowering-lifting system and on which the curtain cloth is attached - these are rods or cables. If only the cords are damaged, then replacing such a system is easy. What should be done? Buy in the store the element that needs to be replaced in advance and change it. Failed fixing elements - a lace or a chain can also be replaced with your own hands.

Please note that parts made from unreliable plastic break down more often and will require much more repair, so buy longer-term samples immediately if possible.

Sometimes more serious repairs are required when the breakdowns are of a different nature. If you are not absolutely sure that you will be able to fix them at home, then it is better to seek help from a specialist. The repairs will be made with high quality and much faster: your favorite kitchen curtains can be hung back to where they hung, in a very short time, as if they did not break at all.

And finally: if something is wrong with the Roman shades, do not despair. Try to figure out how they work. Study all the information on this issue. Try to repair it yourself. To do this, you will have to buy broken parts from the store. Do not save on spare parts, it is better to choose durable and reliable ones. If something does not work out, you can always resort to the services of a master. And have a nice renovation!

Thanks to its unusual appearance and unpretentious care, Roman shades have become quite popular recently.

Installation diagram of roller blinds.

Basically, they are hung on the kitchen windows, since the design of such curtains fits perfectly into the kitchen interior.

Since these are not quite ordinary curtains, but a constructive product with a certain mechanism, then, like any design, Roman shades can break.

Do not rush to immediately use emotions in this case and throw away Roman shades in the heat. Better to have them repaired. Moreover, this must be done in a timely manner, if you do not want to stay for a long time without your favorite curtains in the apartment.

What is used for sewing?

dense fabric;
lining material;
wooden twigs;
small plastic rings (2 rings for each drawstring);
nylon cord.

What is used for assembly and hanging?

a wooden strip, the length of which is equal to the length of the curtains;
hooks with screw legs;
fasteners, screws.

Diagram of Roman curtains with your own hands.

The second part of the Velcro is nailed gently with small nails to the rail.

Instead of studs, a construction stapler is sometimes used. The product is applied to the mount. Thread the cord through the clip and rings. Then the rods are inserted into the folds.

Using the screws, fasten the holder for the curtain. A self-made Roman blind is hung on it.

To prevent the curtains from falling:

A triple cord is passed through a ring at the bottom of the curtains, which is sewn specifically for this purpose. The cord is fixed with clothing clips. Press down on the latch while lifting the curtain. They are released when they are brought to the desired height. The curtain is thus obtained securely in place.
For a secure fit, curtain hooks are sometimes used, on which the remaining ends of the cord are wound.

Absolutely any fabric is suitable for sewing: both thin and denser. However, it is much easier to work with densely textured material.

It is not advised to purchase material with large ornaments for Roman blinds, since the deformed pattern on the assembled product will look ugly.

A fabric with stripes for such a curtain is perfect. In the open state, the folds formed on the curtains will not create any deformation.

So, knowing how to sew and assemble curtains, repairing them will not cause panic.

The structure of an adjustable mechanism in such a product does not break so often, because it is simple in itself.

Please note that parts made from unreliable plastic break down more often and will require much more repair, so buy longer-term samples immediately if possible.

DIY roman blinds

Roman shades will be a chic decoration for any room, from the kitchen to the living room. Simplicity, elegance, gracefulness, laconic and compact design will fit, for example, into the interior of the kitchen, where everything must be convenient and as functional as possible. Surely many people wanted to sew Roman blinds with their own hands, but did not dare. Yes, the Romans are really not as simple as they seem, they have small but important secrets. To sew high-quality roman blinds with your own hands, you need to know a few tricks.

Rimki can be sewn from a variety of fabrics.For sewing Roman curtains with your own hands, both light transparent tulle and heavy curtain fabric are suitable. But still, it is better to sew rims from a hard, dense material that keeps its shape and emphasizes the beauty of the folds. Since the size of the curtains is small and the consumption of fabric is accordingly minimal, you can pamper yourself and purchase exclusive designer textiles. It is better to choose something special that will please the eye every day.

If you want the curtain to let in more sunlight and at the same time protect it from prying eyes, then you need to choose translucent fabrics. And if, on the contrary, you want a minimum of sunlight, then you should purchase an opaque fabric treated with a special impregnation. The opaque fabric does not fade, but, on the contrary, protects wallpaper, furniture and other interior items from fading.

If they are needed for the kitchen, then the choice of fabric must be approached very responsibly. since even the strongest hood will not help protect yourself from soot and steam. Such curtains should be dirt-repellent, absorb as little odors as possible, be easy to clean and be suitable for very frequent washings. Synthetic fabrics have such qualities. Those who love naturalness in everything should pay attention to combined fabrics, which, due to the addition of synthetics, do not require careful maintenance.

It is important to take into account the fact that Roman sewing methods are double and single. The first option is appropriate for light fabrics with a print or translucent organza, while the second option is suitable for denser colored fabrics. When choosing fabric for Roman blinds, you need to pay attention to the correspondence of color, texture and pattern to the general style of the interior. For Provence, country and simple rustic styles, gastronomic and floral motifs are perfect. In the avant-garde kitchen, abstractions and geometric shapes will look chic and harmonious.

The rimka should perfectly "sit" on the window and have ideal proportions. In order to cope with this task, it is necessary to accurately measure and correctly calculate the consumption of fabric. Therefore, the first step is to choose a method of attaching the curtain.

In the window opening. The curtain is near the glass. This option is suitable if the window has a large window sill - in this case, even if the curtain is lowered, it remains accessible. When placing the curtains in the opening, its dimensions must fully coincide with the dimensions of the window opening.

On the wall. The canvas is attached to the outside of the opening. This method of fastening is suitable if there are opening sashes, vents, or when the window opens into the room. In this case, the curtain should be 10 cm wider than the opening and 15 cm longer at both ends.

The rims are solid and can consist of several canvases. If there are several canvases, then each curtain is attached to a separate cornice.

Roman blinds are a legacy that we have inherited from ancient times. Thanks to their functionality and beauty, they not only have not passed into the status of "old and unfashionable", but are also actively gaining new positions. They look very expensive and sophisticated, but it turns out that sewing Roman shades with your own hands is very simple and inexpensive.

Roman shades can be translucent, designed to protect from prying eyes, but not from sunlight. Or completely blocking access to the sun's rays, lined with black out-fabric (opaque). Which one you need - decide for yourself. Also, there are two types of fastening for them: either above the window opening, or on the window frame. The first method is necessary if you often put the window sash "for ventilation". The dimensions in this case are determined by the width and height of the window opening, taking into account the window sill, plus another 10 cm to the width. The second method is suitable if Roman shades are combined with curtains, and also so that they do not interfere with the use of the window sill as an additional shelf.Then the size of the canvas is determined by the dimensions of the window frame, plus 5 cm to the width and 12 cm to the height of the frame.

Depending on the above options, it is necessary to choose the fabric and determine the size of the material cut. If the fabric is too thin, it is better to sew a double-layer Roman shade or add a solid lining. In addition to the fabric, you will need a finishing canvas (or braid), Velcro (Velcro tape), plastic rings, decorative cords, a weighting bar, rail for guides, a cornice bar, screws with an eyelet, a wall hook for fixing a cord, a sewing machine, a jigsaw, furniture stapler, hot glue, screwdriver, ruler, pencil.

1. Choosing the fabric and the method of fastening. Suppose we are going to make a two-layer roman blind, adjacent to the glass. So that after the first wash it does not shrink, the selected fabric must be washed and ironed before opening.

2. We make two identical patterns (remember the same direction of the pattern). When attaching it to the glass, you will need to add 2.5 cm to the sides, 2 cm from the top and 10 cm from the bottom to the size of the window frame on the hem (pocket for the weighting bar).

3. Calculate the number of folds and the distance between the transverse guides (slats). Usually, with a window height of 145-225 cm, 7 folds are required, with 230-250 cm - 8. The following are the recommended distances between the slats for a beautiful drapery at a certain window height: 145 cm / 19.3 cm; 150/20; 155 / 20.7; 160 / 21.3; 165/22; 170 / 22.7; 175 / 23.3; 180/24; 185 / 24.7; 190 / 25.3; 195/26; 200 / 26.7; 205 / 27.3; 210/28; 215 / 28.7; 220 / 29.3; 225/30; 230/27; 235 / 27.6; 240 / 28.2; 245 / 28.8; 250 / 29.4.

4. Sew two patterns on the seamy side, one line, 1 cm indent. Leave only the upper part of the curtain open. If you have a single-layer curtain, then we just make a double hem and a line with an indentation of 0.5-1 cm.Projects of Z500 houses - in Moscow

5. We turn out the "bag", iron it, make two lines: right along the edge and with an indent of 1 cm.

6. We carry out a pocket for a weighting agent. We bend the bottom of the curtain to the width of the plank, plus 1.5 cm for free sliding. Iron on the hem, make a line over the seam.

7. On the wrong side, mark the lines corresponding to the placement of the guides. We put a finishing canvas on top of the lines and make two lines so that a rail can be placed between them. It is better to indent 0.3 cm from the edge of the tape and the step between the lines is equal to the width of the strap, plus 1 cm.

8. Bend the upper edge of the product so that the curtain is of the specified length. We iron the bend. We put a Velcro tape on it and make two lines with an indent from the edge of the tape by 0.4 cm. With the help of this Velcro, it will be attached to the cornice, and you can remove and hang it very easily.

9. Sew on 3 plastic rings for each row of braid with strips. One - in the middle, and two - retreating 2.5 cm from the right and left edges.

10. Cut out a suitable piece of fabric for the cornice strip and wrap the strip in the material using hot glue and a furniture stapler. From the front side of the cornice we put the second part of the Velcro tape on the glue, and from the inside - we fasten two fasteners with which the cornice will be attached to the window frame. We screw 4 screws with an eyelet into the lower part of the bar: three opposite the rings, and the fourth - stepping back 1.5 cm of the edge on the side where the wall hook will be located for fixing the cord.

11. We pass the weighting agent and slats from the curtain hole, fasten the cornice bar.

12. We fix three cords well on the lower rings. Prepare the cords with a length equal to twice the length and one width of the Roman shade. We pass the cords from the bottom up through the rings, including those on the bar. There should be 3 cords in the outermost fourth eye of the screw. We straighten the cords and, stepping back 1.5 cm from the extreme screw, we make bright points on them - "beacons".

13. We pull evenly all the cords, achieving the correct fold and beautiful drapery.

14. We lay out the product on a flat surface, pull out all the cords exactly and tighten a single knot in the area of the "beacons".Below this knot, for convenience, you can tie a pigtail.

15. Fasten the cornice, hang the curtain on it, fix the cord on the fixing hook and enjoy the result.

Once you understand how to sew Roman shades with your own hands, you will not be able to stop anymore. After all, they are suitable for all interior styles and for all rooms. And what ample opportunities open up for decoration. Take, for example, the effect of a completely matching pattern on furniture textiles and curtains.

Yes, now no one will call the interior of your apartment boring and unfashionable!

Roman blinds, which have a special construction and extraordinary design, have gained immense popularity recently.

The unusual look and ease of maintenance have made Roman blinds quite popular today. They are great for complementing the interior of the kitchen, however, by choosing the appropriate model of Roman curtains, it is quite possible to include them in the design of the living room.

Due to the fact that Roman blinds differ from ordinary curtains in a peculiar design with a special mechanism, the rules for their operation may have their own characteristics. And during the service they can break. But this is not a reason to be upset, because they can be repaired with your own hands, the main thing is to do it on time.

There are two ways to fix the curtains: invite a specialist or do it yourself. However, in order not to spend extra money, it is enough to understand the design of Roman blinds and establish the cause of the breakdown.

To understand the device of such curtains, you can try to do it yourself. To create them, they use dense fabric, lining, wooden rods, drawstring rings and nylon cord.

To assemble the curtains and hang them on the window, you will need a curtain-width wooden strip, hooks with screw legs, screws and fasteners. At the same time, it is worth remembering that there are no Roman curtains wider than 220 cm, otherwise the twigs will bend in the folds and create a not very pleasant appearance.

First of all, focusing on the width of the window, prepare the fabric. 20 cm is added to the planned length and Velcro with loops is sewn onto the upper part of the canvas. Further along the length of the canvas, the places where the twigs will be attached are marked. The distance between the rods should be 20 cm. After that, three rings are sewn on the seamy side of each fold, and the second part of the Velcro is nailed to the rail.

The resulting structure is applied to the mount and the cord is threaded through the clamp and rings. Next, the rods are inserted into the folds and the fastener is screwed to the curtain with screws.

Knowing how Roman blinds are made, you can figure out how to repair them. Very often, moving parts need to be repaired. If the cords in the curtains are damaged, they can be replaced with new ones. To do this, you should buy the appropriate cords in the store.

If the plastic part of the curtain breaks, it will be difficult to replace it, therefore, when choosing curtains, you should pay attention to the quality of the plastic used. If you see that you will not be able to fix the problem at home, it is better to contact a specialist. They will quickly and efficiently eliminate any problems.

Repairing a children's room is an extremely responsible matter, because here the child will grow and develop, play, engage, etc.

Stained-glass glazing is used today quite often in the design of various large objects for various purposes. Order this type of finishing.

Storeroom - a utility room that is necessary for storing things, blanks for the winter or tools.

Work permit is a document (certificate) issued by specialized self-regulatory organizations in the field of design, construction, engineering.

Some people refer to humidifiers as useless purchases just because they have never tried them in action.

The filling process seems complicated only at first glance. Getting a flat wall is a matter of experience.

When planning the construction of a new home, we think not only about the layout or the number of floors, we choose not only the design.

Recently, natural materials have been increasingly used in interior design. One of these is bamboo.

Any construction work is a rather difficult task that only professionals can cope with. Many experts believe.

Renovation in the bathroom has its own characteristics that should be taken into account in time.

Basement ventilation can be natural or forced.

Anyone, when planning to buy an apartment, is faced with a difficult task - to buy.

Siding is a relatively new material for cladding facades of buildings in Russia.

Do you want to breed poultry on your garden plot? Then the first thing.

On the market of construction equipment, mortar pumps are increasingly found, the main function of which is.

Nowadays, concepts such as "clay" and "binder" do not seem to be incompatible. That.

Roman blinds are a popular trend that is gaining more and more fans every day. Why are they so attractive? Those that look stylish, are compact and do not clutter up the interior, and they are also easy to care for.

So, if you dream of Roman blinds, then it's time to pick up a roulette wheel and fulfill your desires, and today we will tell you how to do it right.

Curtain fabric and lining
Metal or wooden pins (in length 3 cm shorter than the width of the curtain itself), 7-8 pcs.
Velcro tape (across the width of the curtain).
Drill and screws.
Chalk or soap for marks.
Threads and a needle.
Sewing machine.
Three cord cuts, each of them should be twice as long as the curtain, and its width should be greater based on one curtain length.
Plastic rings.
Weight bar and wooden curtain bar.
Studs and hooks.

The first step is to measure the window opening, add another 12-15 centimeters to the results obtained for the allowances from the bottom and top of the Roman shade, as well as five centimeters to the side seams.

Now, on the seamy side, using chalk or a piece of dry soap, you need to mark the installation locations of the rings, fold lines and folds.

Make sure that the distance between the folds is identical, otherwise you risk getting roman shades with ugly draperies.

Now you can safely start the process of sewing curtains. Here you cannot do without a sewing machine. It doesn't matter if it is electrical or mechanical, the main thing is your skills in handling it. If you do not know how to sew, then it is better to contact a friend or familiar seamstress. In the absence of skills, you can simply ruin the fabric and mood.

We decided to start sewing curtains ourselves - be extremely careful and attentive. First, process the side edges and top cut of the fabric or textile that is intended for curtains.

It is necessary to sew a Velcro-Velcro to the upper cut, on which, in fact, our curtain will be attached. Velcro is the most convenient care option. So, it is easy to remove the curtains for washing and hang them back, and if you get tired of it at all, then you can replace it with another one or even remove it altogether.

Rate the article:

Grade 3.2 who voted: 85