Do-it-yourself steering sable repair

In detail: do-it-yourself steering sable repair from a real master for the site my.housecope.com.

Gazelle Sable. Power steering adjustment

Adjustment includes two operations: adjustment of the propeller thrust bearings and adjustment of the gearing.

Screw Thrust Bearing Adjustment

In order to determine the need for adjustment, set the steering wheel to the middle position.

We disconnect the longitudinal steering rod from the bipod (see "Replacing the steering rods and their hinges", p. 108).

. while constantly shaking the bipod, we control the backlash until it is completely eliminated.
We lock the adjusting nut with a beard, upsetting sections of its shoulder into the grooves of the crankcase.

Gear adjustment

The gearing is adjustable only after the play in the propeller bearings has been eliminated.
On a vise-mounted mechanism.
. holding the key "16" input shaft.
. we swing the bipod. The backlash should not be felt by hand (exceed 0.3 mm at the end of the bipod).

Otherwise, remove the bipod from the sector shaft. We process the connection with a penetrating liquid.

Repair gur with sable part 7

Image - Do-it-yourself steering sable repair