Do-it-yourself cobra fishing reel repair

The mechanism of the coils is constantly subjected to tests caused by the conditions in which they are operated. The presence of sand, dust, water can contribute to various kinds of breakdowns. Incorrect use, transportation, untimely repair and maintenance of fishing reels can also lead to their malfunction. Sometimes breakdowns can occur against the background of their device features or quality. Repair of fishing reels in most cases is done by hand.

If repairing a fishing reel with your own hands is carried out for the first time, then you must strictly follow the sequence of actions and lay out the spare parts in the order they were removed. This condition is necessary for its correct collection after repair or preventive measures.

Before disassembling, it is necessary to thoroughly wipe the outer part of the product from contamination with a cotton swab dipped in plain water or using liquid soap. If the dirt does not wash off, you can use more effective agents (gasoline or alcohol).

First of all, easily accessible external parts are removed:

• clutch nut, followed by a spool;
• small washers and gears. The main thing is not to mix them during the shooting process and lay them out in the order in which they were shot;
• mechanism handle.

Next, the mechanism itself is analyzed:

• it is necessary to unscrew the clamping nut and remove it together with the lining;
• the rotor is removed, then the shackle and the latch mechanism is disassembled. The line laying roller also needs to be disassembled.

The body of the spinning reel is disassembled:

• the lever bolt responsible for switching to reverse is unscrewed, and the toggle switch is removed;
• the plug is removed and the bolt is removed with a screwdriver;
• the wall of the coil is removed. Since this will require effort, to simplify the process, you can take tweezers and pick it up with it.

Analysis of the main mechanism, including two gears and a slider. If the reason for parsing is prevention, then it is better not to disassemble the contents, but to properly clean the spinning reel and lubricate it with a cotton swab. If the parts are heavily soiled, then it is still better to remove them and rinse well.

The assembly of the fishing reel after repair or cleaning is carried out in the reverse order in which the parts are folded. But at the same time, you need to check the correct installation of each part.

Depending on the quality and type of the coil, as well as its design features, breakdowns periodically occur that can be fixed at home. How to repair a spinning reel and what problems there are, we will consider in more detail.

An important element of the reel is the handle folding system. The simplest mechanism consists of a handle and a hexagon that holds it, and a fastening screw is screwed into it from the back. A handle with a push-button folding mechanism is more convenient. Such handles are more durable and break less often.

The most common problem with spinning handles is losing them. Handles are lost during improper transportation, inaccurate operation of the spinning rod. Sometimes the main mistake of fishermen is to screw in a plastic part, thereby losing the lock nut to the device.

• it is necessary to insert a new handle, screwing it onto an iron pin, and fix it with a screw;
• to prevent loss of the handle, it is recommended to purchase models with additional fasteners, in the form of washers or bushings.

Do-it-yourself repair of the spinning reel line laying machine.The reason for the failure of this part may be its contamination or improper casting technique. If there is a problem with the line layer, more serious damage can occur, such as rod breakage or poor casting accuracy.

• all fasteners must be carefully inspected and, if necessary, tightened. In most cases this is sufficient;
• if the result remains the same, it is necessary to look for the cause in the tension spring. To detect and repair it, it is necessary to remove the coil cover and, having found it, carefully replace it or insert it into place if it pops out;
• in order to prevent it from popping out in the future and to prolong its service life, it is recommended to place a rubber gasket under it. Such a gasket will also add elasticity to the spring;
• repair of the fishing reel laying line can be done right on the spot, in the process of fishing, and instead of a spring, use a homemade pin.

Line breaks are one of the most common reel failures.

• breaks are mainly due to the locking nut, which in most reel designs is 2 mm larger than the spool. When casting the fishing line, it, clinging, falls under the nut, where it breaks. But it is worth noting that only braided line breaks, monofilament line is not prone to break;
• the next reason may be the premature closing of the bail of the line holder;
• when using inertial reels, line breakage occurs due to the wear and tear of bearings during unwinding of the line.

• in case of jamming of the bearings, they should be replaced with new ones, while the coil must be disassembled;
• in case of premature closing of the shackle, it is necessary to replace the latch and its body, if they are commercially available for this brand;
• if the problem is a protruding retaining nut, replace the felt pad with a thinner pad, such as plastic. This will allow the washer to drop down a little and align it with the edge of the spool.

Important! In order to prevent breakages, it is also necessary to monitor the fishing line itself, and when knots appear, they must be eliminated.

In case of coil malfunctions, the line feeds in a spiral.

The main reason for the supply of fishing line in a wave is its pollution. When dirt gets into the bearing, it becomes clogged, ceases to function normally and feeds the fishing line incorrectly.

Repair of spinning reels in this case consists in its disassembly and cleaning. If cleaning does not work, it is recommended to disassemble the coil to the bearings, remove the old grease from them and apply a new one.

Noise inside the reel indicates a failure of the bearings or one of its parts. The cause of noise can also be the usual contamination of the mechanism. It is necessary to immediately stop its operation and repair the spinning reel with your own hands, for this you need:

• disassemble the coil according to the technology described above;
• if contamination is found, clean;
• carefully inspect all parts for their integrity and replace them in case of breakage;
• assemble the coil back.

It happens that uneven winding of fishing line on the spool occurs, it occurs along an oblique line, thereby forming a cone. On the main axis there are washers having different thicknesses. If the fishing line is wound with a cone down, you need to remove one washer. And, accordingly, when the cone is directed upwards, the washer is added.

Parts must be laid out in the order they were removed.

To prevent damage to the coils, it is recommended to take timely preventive measures that will save you from repairs and spending additional money on the purchase of spare parts.

The first step to long-term operation of the product is a careful attitude to it. What is needed for this:

• spinning can not be dropped or thrown anywhere;
• often rearrange the reel from one fishing rod to another;
• the coil must not be wetted, and if this happens, it must be dried and preferably lubricated;
• during transportation, the fishing rod should not lie among the tools that can damage the reel when the machine is shaken. There must be a special shockproof case for the fishing rod;
• after the trip, it is necessary to check all the mounting bolts that could unwind or fly off during the shaking;
• do not store fishing rods in the sun, as ultraviolet radiation has a destructive effect on the lubrication of the device;
• it is necessary to constantly maintain the level of lubricant on the bearings, since in the event of a breakdown, repairs will cost more;
• after the end of the fishing season, if it is not possible to carry out repairs and preventive maintenance with your own efforts, it is recommended to contact the service center. This is especially true for expensive models, such as, for example, the Ambassador 5600 fishing reel, which is not so easy to repair with your own hands.

Important! Do not throw away the instruction manual for the coil that came with the purchase of the product. It tells you how to care for a particular model.

The next step is timely care. What is needed for this:

• each fisherman in his arsenal of fishing accessories should have the following tools and tools: a screwdriver, cotton wool, tweezers, alcohol, lubricant, liquid soap;
• every six months, regardless of the number of days the coil is used, it is necessary to clean and lubricate the entire mechanism;
• when lubricating the mechanism, it is imperative to remove the remnants of the old grease, which will begin to coke over time if it is not removed in time. Hardened grease residues affect the operation of the coil and have a destructive effect on aluminum, from which most of the product is made;
• if the coil has a one-piece design, it is better to use a lubricant with a silicone base or a spray (also based on it). This is necessary in order to protect the mechanism from getting wet and lubricate the most inaccessible places, it is silicone grease that allows you to do this.

Having considered how to fix a spinning reel, you understand that any problem can be solved. The main thing is to follow the sequence when disassembling the coil, carefully laying out its elements and the availability of spare parts. But if preventive measures are taken in time, consisting in cleaning and lubricating the parts of the coil, it is possible to prevent its breakdown altogether. Careful attitude and care of the product will extend the service life for a long time.

Greetings dear anglers. Today we will talk about disassembling the Cobra CB 640 coil. Any gear needs to be monitored and cared for, and this applies to coils in the first place, because an unlubricated coil will make unnecessary noise, scare away fish, and eventually break.

Of course, the model in question is budgetary, and someone will think why fix and disassemble something when you can buy a new one, but you must agree that it is much better to spend this money on various little things.

So, let's figure out why you need to disassemble the coil. Firstly, this is elementary maintenance, lubrication, adjustment, broach, etc. Secondly, repair or replacement of any parts.

Let's start, perhaps, with the simplest, disassembly of the friction brake. The clutch is disassembled for cleaning from dirt and flushing the discs. Finding out that it is time to clean the clutch is quite simple, just twist the spool. If the spool spins jerkily, then it's time for cleaning. For all the work we need: a flat screwdriver, a Phillips screwdriver, and small pliers.

First, unscrew the bolt at the end of the coil:

Unscrew and remove the adjusting knob:

We pry off the spring, which fixes the gear and, in combination, cracks when we adjust the friction:

After that, we take out the gear and the clamping spring:

The brake disc itself is pulled out quite tightly, so you need to lightly hit the end of the coil so that it falls out:

After flushing or replacing parts of the friction brake, everything is put back together, I think this will not be a problem even for the younger generation of anglers.

This node is the most important in the reel, and requires constant lubrication, since this is where most of the moisture enters. In this article, we will not consider the removal of the entire bracket and the removal of the roller, since the roller can be lubricated without disassembly with ordinary silicone grease and then wipe the working surface with a napkin, and the entire bracket is removed quite rarely.

We unscrew the bolt of the cover of the mechanism:

There should be a spring here, but I don't have it because it broke. To prevent this from happening to you, lubricate this assembly regularly. Weakening or breakage of the spring will result in incomplete closing of the bracket, the fishing line will not slip onto the roller, and as a result will be twisted.

Next, unscrew the bolt of the bracket holder itself, and remove the bracket to the side:

From here we can remove the spring (which I don’t have) to stretch it a little and a small wire that serves to snap the bracket into place if you suddenly forgot to close it and started to rotate the coil handle:

By the way: I do not advise you to use this mechanism, it is better to close the bracket with your own hands, since this mechanism severely damages parts of the coil and shortens its service life.

Now we move on to the most difficult step compared to the previous ones, disassembling the reel rotation mechanism and controlling the spool stroke. I think you can remove the spool and unscrew the handle without a detailed description.

This mechanism is disassembled to lubricate parts or replace any parts, if any.

Immediately make a reservation, do you see this pin?

You don’t need to try to pull it out, you don’t need it, it is pressed in, and pulling it out once, it will constantly rattle and fall out at the most inopportune moment.

We unscrew the cover of the mechanism. It is held on by three screws, after unscrewing them, pry off the cover with a flat screwdriver and remove it:

Now lift up the main gear, and slightly tilting it down the coils:

Now unscrew this screw:

By the way, this photo clearly shows where to lubricate the coil mechanisms.

We hook this part and remove it from the shaft:

Now you can pull out the shaft, just take it by the part where the spool was and pull it out:

Now you can get the part that is responsible for the movement of the spool:

Now you can start removing the rotating part of the coil. Please note that the nut has a left-hand thread, that is, it is unscrewed clockwise and twisted against:

Having unscrewed the nut, the rotating part can be easily removed, and we will see the backstop mechanism, under which there is a bearing, fixed with 2 screws, by unscrewing which we can remove the worm gear and the bearing itself:

I do not recommend touching these two screws unless absolutely necessary, since they are the main load.

The whole thing is going in the reverse order, but do not forget that this coil is budgetary, and all the screws are twisted into plastic, so try to tighten them along the thread.

Similar models of coils are disassembled in the same way, I hope the article was useful to you.

If you have any questions, I will be happy to answer them in the comments. No tail for you, no scales.

Most of the problems that arise during the operation of the reel and interfere with comfortable fishing, enjoying fishing, can be quite easily fix it yourself.

Another way out is to trust the professionals by contacting a special workshop. Both the first and the second option will allow you to avoid spending on the purchase of a new reel, continuing to fish with the old, familiar and beloved model.

Consider how to disassemble a spinning reel, how to assemble, repair inertialess reels with your own hands, and also analyze the basic rules for caring for these rather complex devices.

And if you are also interested in knowing the device of inertial coils or the choice of a multiplier coil, then read our articles!

Choosing a spinning reel important point for successful fishing and it becomes a pity if the reel quickly becomes unusable, but you should not give up, because in most cases it can be repaired.

Before disassembling the coil, it is better to wipe it with cotton wool soaked in water to remove dirt, sand and fish slime.

When disassembling the coil mechanism, all the details of the mechanisms are put in order right to left or left to right. This will allow you to assemble the inertialess coil without any problems.
The coil is disassembled in this order:

1. first of all it is necessary remove the nut friction brake and spool;
2. then washers and gearslocated under the spool;
3. the next step is to unscrew the handle;
4. then disassemble the reel mechanism: unscrew the clamping nut with pliers or a wrench, remove the rotor;
5. then remove the shackle and the mechanism that snaps it, disassemble the roller through which the fishing line passes;
6. unscrew the stop bolt reverse and remove the switch, unscrew the bolt of the plug and remove it;
7. remove coil wall (as a rule, this requires a fairly large effort);
8. removing the wall, you will see a slider and two gears - this is the main mechanism of the coilIf everything is in order with them, you should not remove them.

As for the assembly of the coil, it is carried out in the reverse order.

The appearance of internal noise can be caused both by the ingress of dirt into the mechanism, and by the breakdown of bearings or other parts. If noise occurs, the use of inertialess is necessary immediately stopso as not to exacerbate the problem. The coil should be disassembled and, depending on the specific cause of the problem, either cleaned or replaced with new parts.

If during the reeling of the fishing line there is a rumble and knock, periodically the mechanism sticks, and under load (when playing) the reel wedges, this means that there is serious problems in the main gear. In this case, the drive and driven gear must be replaced with a new pair.

If the line bail spontaneously switches from the "cast" position to the "reel" position, this can lead to various problems - from shooting the bait to breaking the rod.

To troubleshoot the problem, you must first tighten boltswith which the bow is attached. In the event that this was not enough, you should remove the cover under which the spring is located, and add elasticity to itby installing a gasket on the rod, or change the spring to a stiffer one.

When this problem occurs, the spool handle rotates freely both forward and backward even with the backstop on. In modern models, the stopper is made on the basis of an overrunning clutch, and the cause of the problem is dirt getting on it and thickening of the lubricant. The coupling must be disassembled and lubricated with liquid oil. It is worth noting that the overrunning clutch repair is a rather complicated procedure that is best left to professionals.

The appearance of dents, scratches and other defects on the side of the spool leads to a decrease in the casting distance. In addition, the line is significantly injured by the unevenness of the spool, and its service life is significantly reduced. How to fix? When such defects appear, they must be grind thoroughly, and polish the surface of the spool rim. At the same time, it is necessary to try not to remove the hard metal coating from the side, which is present on good modern coils.

On coils with a front friction brake, the clutch lock nut is located 1-2 mm above the edge of the spool. As a result, the fishing line clings to it and falls under the edge, gets confused and breaks. To fix the problem, you should disassemble the mechanism: remove the fixing nut and clutch washers, and then replace the felt gasket with a thin plastic one.After that, the fixing nut will be aligned with the edge of the spool.

If a creak appears, this means that the coil needs to be lubricated. At the same time, it can be difficult to determine which specific parts creak, so the best option when this problem occurs is to disassemble, clean and lubricate the entire coil. If you have a certain skill, this will not be a problem and will not take much time.

If the line comes off in a tight spiral during casting, the reason is dirt ingress into the mechanism of the line laying roller. The bearing located there rubs, and the fishing line twists. Accordingly, in order to troubleshoot, it is necessary to disassemble, clean and lubricate the roller.

If the line is wound on the spool unevenly, resulting in a front or rear cone, this not necessarily a disadvantage. However, you should know that the situation can be easily corrected in the right direction. On the main shaft of the coil there are several washers of various thicknesses. To eliminate line winding cone down, one washer should be removed, and in the event that cone pointing up, the washer must be added.

Self-tightening of the friction clutch when the fishing line is bled - serious malfunction, which may be present on coils of not the highest quality. It leads to a break in the fishing line when playing fish and in a more severe case - to breakage of the coil itself.
Unfortunately, it is almost impossible to eliminate this defect, the only way out is be careful while fishing.

There are many ways to increase your fish catch, but the most effective ones are the ones. Below, the editors of the site share with you the 3 most effective ways to increase your catch:

1. Cool activator. This is a pheromone-based supplement that activates receptors in fish. ATTENTION! Rybnadzor wants to ban this bait!
2. Less effectively work out any other bait with flavors, it is better if they contain pheromones. But it's best to use novelty 2016 — DYNAMITE EFFECT!
3. Learning different fishing techniques. For example, here it is written about spinning postings.

In some cases, such as the overrunning clutch repair mentioned above, the process is complex and painstaking, so it is better to entrust the repair of this part to a professional. This will fix the problem in a short time and with a professional guarantee.

In addition, do not forget that attempts to repair a spinning reel with your own hands can be very difficultMoreover, there is a risk of exacerbating the problem.

So, let's take a closer look the benefits of having a repair done by a specialist. Spinning reel repairman:

• can make a quick and high-quality repair of spinning reels;
• has a wide range of spare parts for coils of any class;
• can carry out high-precision adjustment of the main pair;
• uses special lubricating oils.

You can find such a master in any major city.

To prevent breakdowns and malfunctions, first of all, you should carefully transport the coil and handle it carefully enough on the pond to avoid shocks that can lead to damage to the mechanism, try not to dip it into water and not put it on the sand.

Cleaning. If sand gets into the mechanism, moving parts, such as the drive and driven gears, can wear out fairly quickly. To avoid this trouble, it is necessary to regularly disassemble the coil and clean it from the inside.

Lubricant. The operation of the mechanism "dry" is another reason for its rapid wear. Lubrication must be carried out immediately after cleaning the coil from sand that has got into it. Which oil to use - the question is not as simple as it might seem at first glance.

If this is not possible, you can use any oil of suitable consistency, but you need to be sure that it does not contain unnecessary additives and will not destroy the plastic parts that are widely used in the production of modern spinning reels.In other words, oil designed to soften the friction of metal on metal - not the best option.

Careful handling of the coil and regular maintenance will help to avoid serious problems. All problems show up in one way or another. at an early stage, it is on it that these malfunctions are easiest to eliminate. Timely care and repair will maximize the life of the reel, and it will delight the angler with flawless performance for many years.

And if you want to gain knowledge on how to install and set up a spinning reel? Read this article.

At the end of the video - the elimination of the self-resetting of the line stacker on an inertialess reel. Happy viewing!

Fishing gives pleasure in its process - each of us knows about it. But after all, besides this, we always want to get results from fishing - to catch not three perches, but a dozen kilogram pikes - this will be a catch! Each of us dreams of this, but not everyone knows how.

A good catch can be achieved (and we know this) thanks to good bait. It can be prepared at home, you can buy it in fishing stores. But it is expensive in stores, and to prepare bait at home, you need to spend a lot of time, and, to be honest, homemade bait does not always work well.

Do you know that disappointment when you bought bait or cooked it at home, and caught three or four bass? Certainly familiar. So maybe it's time to use a really working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?

There is such bait and it's not a myth – TWITCHING LURE. Yes, yes, it is her. Many people know it, many love it, but only a few know how to use it, which is why there are so many angry reviews about it on the Internet. Some people just don't know how to read instructions.

Of course, it is better to try once than to hear a thousand times. Especially now - the season! A 50% discount on your order is a great bonus!

Hurry up and order TWITCHING LURE!

Those problems that may occur in fishing reels either completely disable the product or prevent you from enjoying the fishing process, creating discomfort during operation. In this article, we will analyze the question of how to repair fishing reels of different types - inertial and inertialess.

Of course, there is an opportunity to turn to specialized workshops for help, or you can try to repair fishing reels with your own hands. This will not only save money, but also experience the joy of doing the work yourself.

Choosing this attribute of fishing, each fisherman carefully considers the options and conditions for fishing, and only then acquires a product that is suitable for its characteristics. And it becomes a pity if suddenly it becomes unusable. Where to start repairing a spinning reel? The answer is unequivocal - from the disassembly of the product.

To begin with, we will study the phased disassembly of the product, and then we will consider the signs and main causes of breakdowns that make it necessary to carry out both the repair of inertial coils and the repair of the inertial coil with our own hands.

Regardless of whether you are going to repair inertialess fishing reels or repair multiplier reels that combine the principle of inertial operation, it is very important to properly prepare and carefully disassemble the product. When disassembling it, lay out each removed element and part in order of priority. Such an approach later, after you have repaired the spinning reel, will greatly facilitate the assembly procedure.

To clean the product, use cotton wool or a cotton pad previously moistened with warm water. If you need to remove dirt in hard-to-reach corners, then use either tweezers or cotton swabs. It is strictly not recommended to use aggressive household cleaners to remove dirt.When repairing spinning reels, it is better to use gasoline or alcohol for cleaning.

Let's consider the disassembly of the inertialess coil using the example of Shimano Catana 2500 FB:

To repair the inertialess coil with your own hands, you must first disassemble it. And we will begin this process by removing the handle.

The next step is to remove the plastic washers and the asterisk under them.

We unscrew the nut after unscrewing the bolt that holds it.

We unscrew all the fastening bolts and remove the decorative trim.

To remove the main gear, you must first unscrew the bolt that secures the rod. Then you need to pull out the stem, and then remove the gear.

Remove the remaining gears.

Let's take a look at the disassembly using the ABU GARCIA REVO POWER CRANK 6-L REEL as an example:

Loosen the locknut that secures the reel handle.

We disassemble the body of the multiplier in order to get the spool. To do this, unscrew the locknut,

turn the “cheek” of the multiplier and remove it.

Remove the spool from the multiplier body.

To get to the main mechanism of the multiplier, remove the part from the axis

and gaskets installed underneath.

Remove the axle brake cover.

We unscrew all the fastening bolts that hold the cover that closes the main mechanism and remove it.

Let's take a look at the main mechanism. The largest gear is the main gear, it contains the pressure plates of the clutch.

Carefully remove the decorative overlay (http://prntscr.com/giaynv) and remove the slider guide.

We remove the worm stopper, unscrew the cover and take out the “tooth”, and then remove the “worm”.

The product is completely disassembled, wash it, diagnose the damage and repair the inertial coil.

In order to carry out a competent repair of inertialess coils with your own hands, as well as inertial coils, you must first determine the cause of the breakdown, and do it right. Of course, after disassembling the product, you can clearly see the part that is out of order. However, the manifestation of certain symptoms of malfunctions will most likely help to identify the failed part before the coil is disassembled.

Types of malfunctions and their manifestation:

1. Internal noise. If any abnormal sounds occur in the product during use, stop using it immediately. It is not necessary that the noise is caused by a damaged part, it can also be caused by dirt that has entered the mechanism. However, if the cause is not contamination of the product, then the bearings are most likely out of order. Then, in order to repair the fishing reel, it will be enough to replace worn parts.
2. Squeal in the coil. The constant creaking inside the body signals the fisherman only one thing - it's time to disassemble the reel, clean it of old grease and process it with new one. It is rather problematic to determine which part or assembly is the source of the creak. Therefore, it is better to carry out a complete maintenance of the product.
3. The line is wound unevenly on the spool. Sometimes the following situation begins to occur - the fishing line is unevenly laid on the spool forming a front or rear cone. Fixing this is easy enough. If winding takes place with a cone down, then it is necessary to remove one washer from the main shaft of the reel. In the case of the formation of a cone upwards, the washer must be added.

In order for the product to serve you in the long term, it must be properly and carefully used, carried out periodic maintenance and promptly respond to any signs of deviation from the normal operation of the coil.

Do not put off the repair of spinning reels indefinitely - delay will only aggravate the situation and accelerate the destruction of not only damaged parts, but also those that are in contact with them. This will lead to an increase in the cost of repairs or even failure of the product!

Let's look at a video repairing fishing reels with our own hands with a few tricks: