Do-it-yourself BMW ball joint repair

You can download movies, clips, episodes, trailers for free, and you do not need to visit the Youtube site itself.

Download and watch the ocean of endless videos in high quality. Everything is free and without registration!

In this video, I'll show you how to prepare the support for remodeling for collapsible. And also how to make the necessary.

In this video, I'll show you how to disassemble and convert the ball joint into a collapsible one.

Restoration of steering rods, ball bearings, stabilizer struts E34.

In this video, I explain in detail whether it is possible to restore worn ball joints and ball ends.

everything can be done with your own hands, look at the channel.

how to restore and than a ball joint quickly and no worse than a new one.

Removal and visual inspection of the condition of ball joints, steering tips and stabilizer struts.

We produce silent blocks and stabilizers. T

Restoring a ball joint using a tricky device Lifehack for repairing a ball joint.

This technology has many advantages and disadvantages. So there is no need to swear right away. In my opinion, this technology

do-it-yourself replacement of front levers do-it-yourself replacement of silent blocks of front levers In this series.

I will restore whether yak (steel) rails. (Ukraine) principle + - like on video

The idea has a place to live! Can I order a repair kit for ball e30?

can you make me a set for 4 levers e34

Well done. Great idea, keep it up

Pretty boy. muddled up nicely.

Alexander, can I order repair kits from you?

Any Toyota if you are not satisfied with the comfort then the Lexus has no such problems there

Well, to each his own. But there are no such cars in the world in which there are eternal parts, regardless of the brand and model. And the video talks about how to make the part cheaper to maintain.

Sell ​​this fucking bmw buy a normal car and drive without problems

And other cars without problems? Buy what? Credit mobile?

+ Alexander Laguta well, he probably wanted to fuck Toyota about shit) don’t listen to him like the boomer ride it I myself save up for e34 this is a dream and all these lovers of Japanese women let them go through the forest

Is it possible to do this on aluminum arms?

Can. But the technology is slightly different there. The thread is cut in the arm itself, not in the welding nut.

Well done, great refurbishment. He explained well, however, it would be nice to show the production of crackers. Thank you for the video. Keep making good vids

Thanks for the feedback. I will try to make more and more videos like this.

So is it possible to order such a kit or not?

A man should know everything. Alexandr Laguta

A man should know everything. Alexandr Laguta 89118838722 Valentine.

Write your phone number, let's discuss

A man should know everything. Alexandr Laguta, do you work to order? if yes, ready to discuss. need repair kits.

Brad, there is a concept of metal fatigue, fix it, don’t fix it, suspension parts are not designed for repair, this method is purely for sale, guys, don’t take $500 to repair the suspension and you will be happy

+ Sergiy Prokopchuk and another down who doesn’t understand in principle what it’s all about

Obi Van Kinobi and fatigue here 🙂 .

Thanks for your expert opinion. Your definition clearly says that you are a high-class expert in the automotive industry. First of all, I recommend that you study the device and the principle of operation of this node. And you will immediately understand that “metal fatigue” is a completely different opera. If it’s clear, then when an oil leak is detected on the crankshaft oil seal, you need to replace the engine, and even better the car.Let me explain - it is not profitable for the manufacturer to sell crackers for 100 rubles, it is profitable for him to sell the whole support and put polyethylene crackers in it, which is enough for half a year at a cost of 2500 rubles. But this is everyone's business. I do not consider it profitable to throw out 10,000 per set once every half a year. I personally go for 2 years and pulled up once. Learn the device of the car.

culturally, I liked it. I didn’t come up with money for the set?

Published 8 months ago

Well done. Great idea, keep it up

If there is no nichrome, then this is more or less normal. I ADVISE in this case to make a tolotnitsa in a bolt,
I also advise: mill, dig or scratch diagonal grooves in relation to the axis from the inside of the cracker to improve lubrication of the entire finger ball.
Long life to your car and good luck on the road.

How can I order this kit from you?

The idea has a place to live! Can I order a repair kit for ball e30?

can you make me a set for 4 levers e34

culturally, I liked it. I didn’t come up with money for the set?

Well done, great refurbishment. Well explained, however, it would be nice to show the production of crackers. Thank you for the video. Keep making good vids

Any Toyota if you are not satisfied with the comfort then the Lexus has no such problems there

Is it possible to do this on aluminum arms?

Brad, there is a concept of metal fatigue, fix it, don’t fix it, suspension parts are not designed for repair, this method is purely for sale, guys, don’t take $500 to repair the suspension and you will be happy

So is it possible to order such a kit or not?

Well done) cool done) the idea has the right to life

Sell ​​this fucking bmw buy a normal car and drive without problems

Own your own car and follow car companies all the time? Do you like to dig into engines and drives, disassemble and repair cars? Or do you do it out of necessity, because your "trough" is unable to work properly? Then this section is especially for you, here the content is completely dedicated to car lovers. Review of new cars, as well as the news of the automotive world.

The main automotive content consists of various reviews of modern cars. Certain people buy certain cars, or rent them, and then demonstrate to their viewers the abilities of this or that car. Such reviews are suitable for those who love hardware very much and are going to buy a decent car for themselves, and therefore are in the process of choosing. However, most of these reviews represent a rather subjective view, and such a view is often not worth adopting as the ultimate truth.

The next line of videos in this topic is occupied by various automotive news. Here you can easily find out about the novelties of this year. View beautiful and exciting test drives arranged by the creators, and carefully read the technical specifications. Such content is quite pleasant and very informative. Sometimes it helps in choosing a car much better than reviews from rather dubious faces. Although most often these are commercials that praise their product, but do you have a head on your shoulders? Technical characteristics can't be hidden from you anyway.

However, the most spectacular and interesting test drive can only be a race. And this goodness is in abundance in this category, because transport and racing are literally inseparable things. Even cars that seem unsuitable for racing conditions manage to take part in street races. And sometimes videos with recordings of such races end up on the Internet and, accordingly, on our page. Drive, speed, dashing and risky drivers will surprise you with their ingenuity, virtuosity and skill. However, here you can find videos with official races.

Also, do not forget about life hacks for drivers, and various secrets that will help either repair a part of the car or prevent a breakdown.Looking through such content, you can emphasize a lot of new and useful things for yourself. There are even various shows for car enthusiasts such as Pimp Your Car. Where real masters turn a terrible car into an excellent means of transportation. In general, there is a lot of interesting content for motorists.

You can also note automotive humor, interesting situations on the roads, accidents and other interesting things that fell into the lens of an amateur camera, and now flaunt in the form of videos on our website. These kinds of videos are perfect for defusing and raising your spirits.

In this section, every motorist will find for himself what he likes. This section contains really high-quality videos, not only in terms of pictures, but also in terms of the information component. We wish you a pleasant viewing.

Tampilkan control pemutar

• Dipublikasikan tanggal 2 Mar 2018
• In this video, I'll show you how to disassemble and convert the ball joint into a collapsible one.
• Mobil & Automotif
• Do-it-yourself BMW e34 ball joint repair. part 1.bmwBMW e34BMWbmwBMW e34e34 DIY BMW ball joint repairbmw ball joint restorationBmw suspension repairsuspension restorationhow to repair a ball jointhow to restore a BMW ball joint

This tie road end is very expensive?

Cool, thanks for your videos. It really saves a lot of money. If you do not crooked hands will hold. On the Nissan Maxima, a retaining ring is put in place of your support washer, and nothing keeps flying out

And what to do if the ball vomited out of the support? Can this case be restored?

Good day. When pulling out the ball pin, it is advisable to replace the support. If there is no replacement, then you need to make a repair glass.

Anthers are mostly rubber, and rubber tends to dry out and burst. The lubricant from the hinge practically does not completely cover the boot inside, and when applied to the inside of the boot, a hydro-repellent property is also added. When small cracks appear in the anther, the lubricant will keep water from getting inside for some time. And it will also work as an indicator of a violation of the integrity of the anther.

Can I have diagrams? They will be universal. Particularly interested in the tool for grinding crackers

In this video, I'll show you how to prepare the support for remodeling for collapsible. And also how to make the necessary parts and tools needed for this repair.

I will restore whether yak (steel) rails. (Ukraine) principle + - like on video

Anton Golub 16 giorni fa

The idea has a place to live! Can I order a repair kit for ball e30?

Vladimir Kamenkin 25 giorni fa

can you make me a set for 4 levers e34

Well done. Great idea, keep it up

Valentin Efremenko Mese fa

Pretty boy. muddled up nicely.

Valentin Efremenko Mese fa

Alexander, can I order repair kits from you?

Any Toyota if you are not satisfied with the comfort then the Lexus has no such problems there

Alexandr Laguta 2 mesi fa

Well, to each his own. But there are no such cars in the world in which there are eternal parts, regardless of the brand and model. And the video talks about how to make the part cheaper to maintain.

Sell ​​this fucking bmw buy a normal car and drive without problems

Konstantin Efimov 14 giorni fa

And other cars without problems? Buy what? Credit mobile?

+ Alexander Laguta well, he probably wanted to fuck Toyota about shit) don’t listen to him like the boomer ride it I myself save up for e34 this is a dream and all these lovers of Japanese women let them go through the forest

Alexandr Laguta 2 mesi fa

Is it possible to do this on aluminum arms?

Alexandr Laguta 2 mesi fa

Can. But the technology is slightly different there. The thread is cut in the arm itself, not in the welding nut.

Vadim Zadorozhny 2 mesi fa

Well done, great refurbishment. He explained well, however, it would be nice to show the production of crackers. Thank you for the video. Keep making good vids

Alexandr Laguta 2 mesi fa

Thanks for the feedback. I will try to make more and more videos like this.

Anatoly Aleksandrovich 3 mesi fa

So is it possible to order such a kit or not?

Valentin Efremenko Mese fa

A man should know everything. Alexandr Laguta

Valentin Efremenko Mese fa

A man should know everything. Alexandr Laguta 89118838722 Valentine.

Write your phone number, let's discuss

Valentin Efremenko Mese fa

A man should know everything. Alexandr Laguta, do you work to order? if yes, ready to discuss. need repair kits.

Anatoly Aleksandrovich 3 mesi fa

Brad, there is a concept of metal fatigue, fix it, don’t fix it, suspension parts are not designed for repair, this method is purely for sale, guys, don’t take $500 to repair the suspension and you will be happy

+ Sergiy Prokopchuk and another down who doesn’t understand in principle what it’s all about

Sergiy Prokopchuk 2 mesi fa

Obi Van Kinobi and fatigue here 🙂 .

Alexandr Laguta 3 mesi fa

Thanks for your expert opinion. Your definition clearly says that you are a high-class expert in the automotive industry. First of all, I recommend that you study the device and the principle of operation of this node. And you will immediately understand that “metal fatigue” is a completely different opera. If it’s clear, then when an oil leak is detected on the crankshaft oil seal, you need to replace the engine, and even better the car. Let me explain - it is not profitable for the manufacturer to sell crackers for 100 rubles, it is profitable for him to sell the whole support and put polyethylene crackers in it, which is enough for half a year at a cost of 2500 rubles. But this is everyone's business. I do not consider it profitable to throw out 10,000 per set once every half a year. I personally go for 2 years and pulled up once. Learn the device of the car.

culturally, I liked it. I didn’t come up with money for the set?

If there is no nichrome, then this is more or less normal. I ADVISE in this case to make a tolotnitsa in a bolt, I also advise: mill, dig or scratch diagonal grooves in relation to the axis from the inside of the cracker to improve lubrication of the entire finger ball. Long life to your car and good luck on the road.

Alexandr Laguta 5 mesi fa

Vitaly thanks for the addition. You can also make a shtaferka for lubrication in the lid, but it’s risky to sort out with the amount of lubricant, which will lead to a rupture of the anther.

How can I order this kit from you?

Alexander Shkarlet 28 giorni fa

But what about the e39 suspension? There are aluminum levers

Alexander Shkarlet 28 giorni fa

4 pieces if of course the price is adequate

Alexander Shkarlet 28 giorni fa

Valentin Efremenko Mese fa

A man should know everything. Alexandr Laguta, in terms of demand, I'm also ready to order a couple of repair kits)

Well done) did a great job) the idea has the right to life👍😊

I will restore whether yak (steel) rails. (Ukraine) principle + - like on video

The idea has a place to live! Can I order a repair kit for ball e30?

can you make me a set for 4 levers e34

Well done. Great idea, keep it up

Pretty boy. muddled up nicely.

Any Toyota if you are not satisfied with the comfort then the Lexus has no such problems there

Sell ​​this fucking bmw buy a normal car and drive without problems

Is it possible to do this on aluminum arms?

Well done, great refurbishment. He explained well, however, it would be nice to show the production of crackers. Thank you for the video. Keep making good vids

So is it possible to order such a kit or not?

Brad, there is a concept of metal fatigue, fix it, don’t fix it, suspension parts are not designed for repair, this method is purely for sale, guys, don’t take $500 to repair the suspension and you will be happy

culturally, I liked it. I didn’t come up with money for the set?

If there is no nichrome, then this is more or less normal. I ADVISE in this case to make a tolotnitsa in a bolt,
I also advise: mill, dig or scratch diagonal grooves in relation to the axis from the inside of the cracker to improve lubrication of the entire finger ball.
Long life to your car and good luck on the road.

How can I order this kit from you?

Well done) did a great job) the idea has the right to life👍😊

This tie road end is very expensive?

Cool, thanks for your videos. It really saves a lot of money. If you do not crooked hands will hold.On the Nissan Maxima, a retaining ring is put in place of your support washer, and nothing keeps flying out

And what to do if the ball vomited out of the support? Can this case be restored?

Good day. When pulling out the ball pin, it is advisable to replace the support. If there is no replacement, then you need to make a repair glass.

Anthers are mostly rubber, and rubber tends to dry out and burst. The lubricant from the hinge practically does not completely cover the boot inside, and when applied to the inside of the boot, a hydro-repellent property is also added. When small cracks appear in the anther, the lubricant will keep water from getting inside for some time. And it will also work as an indicator of a violation of the integrity of the anther.

Can I have diagrams? They will be universal. Particularly interested in the tool for grinding crackers

A bolt with edges must be grasped with a key. Great idea, but at a speed of 200 a good bump will not break the weld?

+ Alexander Nichik Yes, this technology is still coming from the USSR. Bate turners used this technology to make knots on the field back in the early 90s. The cracker was true of two parts and was sharpened from capralon.

Well, yes, horseradish radish is not sweeter as they say !!

Or conversion kits. The main thing is that manufacturers think about the quality of their parts and price. After all, it’s not a problem to buy a new one, but the problem is that not everyone can afford 7-10 tr per set twice a year.

Well, since the technology can be said to be fresh, it can still be refined and refined, and the thought is actually alive and it may even fit into the mass, in a couple of years such levers may appear on sale !!

Good day. I myself have been using it for more than one year (it was also done on a 4x4 field), there the load on the suspension is many times greater and there are no problems. The main thing is that there are no gaps in the welding. And the most important thing is that the tearing load goes to the part where the finger comes out.

In this video, I'll show you how to prepare the support for remodeling for collapsible. And also how to make the necessary parts and tools needed for this repair.

Nazar Dzyuban 13 horas atrás

I will restore whether yak (steel) rails. (Ukraine) principle + - like on video

Anton Golub 16 dias atrás

The idea has a place to live! Can I order a repair kit for ball e30?

Vladimir Kamenkin 25 dias atrás

can you make me a set for 4 levers e34

Well done. Great idea, keep it up

Valentin Efremenko Mês atrás

Pretty boy. muddled up nicely.

Valentin Efremenko Mês atrás

Alexander, can I order repair kits from you?

Alexandr Laguta Mês atrás

Alexey Ivanov 2 meses atrás

Any Toyota if you are not satisfied with the comfort then the Lexus has no such problems there

Alexandr Laguta 2 meses atras

Well, to each his own. But there are no such cars in the world in which there are eternal parts, regardless of the brand and model. And the video talks about how to make the part cheaper to maintain.

Alexey Ivanov 2 meses atrás

Sell ​​this fucking bmw buy a normal car and drive without problems

Konstantin Efimov 14 dias atrás

And other cars without problems? Buy what? Credit mobile?

+ Alexander Laguta well, he probably wanted to fuck Toyota about shit) don’t listen to him like the boomer ride it I myself save up for e34 this is a dream and all these lovers of Japanese women let them go through the forest

Alexandr Laguta 2 meses atras

igor ivanov 2 meses atrás

Is it possible to do this on aluminum arms?

Alexandr Laguta 2 meses atras

Can. But the technology is slightly different there. The thread is cut in the arm itself, not in the welding nut.

Vadim Zadorozhny 2 meses atrás

Well done, great refurbishment. He explained well, however, it would be nice to show the production of crackers. Thank you for the video. Keep making good vids

Alexandr Laguta 2 meses atras

Thanks for the feedback. I will try to make more and more videos like this.

Anatoly Aleksandrovich 3 meses atrás

So is it possible to order such a kit or not?

Valentin Efremenko Mês atrás

A man should know everything. Alexandr Laguta

Valentin Efremenko Mês atrás

A man should know everything. Alexandr Laguta 89118838722 Valentine.

Alexandr Laguta Mês atrás

Write your phone number, let's discuss

Valentin Efremenko Mês atrás

A man should know everything. Alexandr Laguta, do you work to order? if yes, ready to discuss. need repair kits.

Anatoly Aleksandrovich 3 meses atrás

Obi Van Kinobi 3 meses atras

Brad, there is a concept of metal fatigue, fix it, don’t fix it, suspension parts are not designed for repair, this method is purely for sale, guys, don’t take $500 to repair the suspension and you will be happy

+ Sergiy Prokopchuk and another down who doesn’t understand in principle what it’s all about

Sergei Prokopchuk 2 meses atrás

Obi Van Kinobi and fatigue here 🙂 .

Alexandr Laguta 3 meses atras

Thanks for your expert opinion. Your definition clearly says that you are a high-class expert in the automotive industry. First of all, I recommend that you study the device and the principle of operation of this node. And you will immediately understand that “metal fatigue” is a completely different opera. If it’s clear, then when an oil leak is detected on the crankshaft oil seal, you need to replace the engine, and even better the car. Let me explain - it is not profitable for the manufacturer to sell crackers for 100 rubles, it is profitable for him to sell the whole support and put polyethylene crackers in it, which is enough for half a year at a cost of 2500 rubles. But this is everyone's business. I do not consider it profitable to throw out 10,000 per set once every half a year. I personally go for 2 years and pulled up once. Learn the device of the car.

culturally, I liked it. I didn’t come up with money for the set?

Vitaly auto 5 meses atrás

If there is no nichrome, then this is more or less normal. I ADVISE in this case to make a tolotnitsa in a bolt, I also advise: mill, dig or scratch diagonal grooves in relation to the axis from the inside of the cracker to improve lubrication of the entire finger ball. Long life to your car and good luck on the road.

Alexandr Laguta 5 meses atras

Vitaly thanks for the addition. You can also make a shtaferka for lubrication in the lid, but it’s risky to sort out with the amount of lubricant, which will lead to a rupture of the anther.

How can I order this kit from you?

Alexander Shkarlet 28 dias atrás

But what about the e39 suspension? There are aluminum levers

Alexander Shkarlet 28 dias atrás

4 pieces if of course the price is adequate

Alexander Shkarlet 28 dias atrás

Valentin Efremenko Mês atrás

A man should know everything. Alexandr Laguta, in terms of demand, I'm also ready to order a couple of repair kits)

Well done) cool done) the idea has the right to life

إظهار عناصر التحكم بالمشغّل

• 2018/02/26
• In this video, I'll show you how to prepare the support for remodeling for collapsible. And also how to make the necessary parts and tools needed for this repair.
• السيارات والمركبات
• bmwbmw e34BMWbmwBMW e34e34BMW ball joint repairbmw do-it-yourselfbmw ball joint repairBmw suspension repairbmw suspension restorationhow to repair a ball jointhow to restore a BMW ball joint

I will restore whether yak (steel) rails. (Ukraine) principle + - like on video

The idea has a place to live! Can I order a repair kit for ball e30?

can you make me a set for 4 levers e34

Well done. Great idea, keep it up

Pretty boy. muddled up nicely.

Alexander, can I order repair kits from you?

Any Toyota if you are not satisfied with the comfort then the Lexus has no such problems there

Well, to each his own. But there are no such cars in the world in which there are eternal parts, regardless of the brand and model. And the video talks about how to make the part cheaper to maintain.

Sell ​​this fucking bmw buy a normal car and drive without problems

And other cars without problems? Buy what? Credit mobile?

+ Alexander Laguta well, he probably wanted to fuck Toyota about shit) don’t listen to him like the boomer ride it I myself save up for e34 this is a dream and all these lovers of Japanese women let them go through the forest

Is it possible to do this on aluminum arms?

Can. But the technology is slightly different there. The thread is cut in the arm itself, not in the welding nut.

Well done, great refurbishment. He explained well, however, it would be nice to show the production of crackers. Thank you for the video. Keep making good vids

Thanks for the feedback. I will try to make more and more videos like this.

So is it possible to order such a kit or not?

A man should know everything. Alexandr Laguta

A man should know everything.Alexandr Laguta 89118838722 Valentine.

Write your phone number, let's discuss

A man should know everything. Alexandr Laguta, do you work to order? if yes, ready to discuss. need repair kits.

Brad, there is a concept of metal fatigue, fix it, don’t fix it, suspension parts are not designed for repair, this method is purely for sale, guys, don’t take $500 to repair the suspension and you will be happy

+ Sergiy Prokopchuk and another down who doesn’t understand in principle what it’s all about

Obi Van Kinobi and fatigue here 🙂 .

Thanks for your expert opinion. Your definition clearly says that you are a high-class expert in the automotive industry. First of all, I recommend that you study the device and the principle of operation of this node. And you will immediately understand that “metal fatigue” is a completely different opera. If it’s clear, then when an oil leak is detected on the crankshaft oil seal, you need to replace the engine, and even better the car. Let me explain - it is not profitable for the manufacturer to sell crackers for 100 rubles, it is profitable for him to sell the whole support and put polyethylene crackers in it, which is enough for half a year at a cost of 2500 rubles. But this is everyone's business. I do not consider it profitable to throw out 10,000 per set once every half a year. I personally go for 2 years and pulled up once. Learn the device of the car.

culturally, I liked it. I didn’t come up with money for the set?

If there is no nichrome, then this is more or less normal. I ADVISE in this case to make a tolotnitsa in a bolt,
I also advise: mill, dig or scratch diagonal grooves in relation to the axis from the inside of the cracker to improve lubrication of the entire finger ball.
Long life to your car and good luck on the road.

Vitaly thanks for the addition. You can also make a shtaferka for lubrication in the lid, but it’s risky to sort out with the amount of lubricant, which will lead to a rupture of the anther.

In this video, I'll show you how to prepare the support for remodeling for collapsible. And also how to make the necessary parts and tools needed for this repair.

I will restore whether yak (steel) rails. (Ukraine) principle + - like on video

The idea has a place to live! Can I order a repair kit for ball e30?

can you make me a set for 4 levers e34

Well done. Great idea, keep it up

Pretty boy. muddled up nicely.

Alexander, can I order repair kits from you?

Any Toyota if you are not satisfied with the comfort then the Lexus has no such problems there

Well, to each his own. But there are no such cars in the world in which there are eternal parts, regardless of the brand and model. And the video talks about how to make the part cheaper to maintain.

Sell ​​this fucking bmw buy a normal car and drive without problems

And other cars without problems? Buy what? Credit mobile?

+ Alexander Laguta well, he probably wanted to fuck Toyota about shit) don’t listen to him like the boomer ride it I myself save up for e34 this is a dream and all these lovers of Japanese women let them go through the forest

Is it possible to do this on aluminum arms?

Can. But the technology is slightly different there. The thread is cut in the arm itself, not in the welding nut.

Well done, great refurbishment. He explained well, however, it would be nice to show the production of crackers. Thank you for the video. Keep making good vids

Thanks for the feedback. I will try to make more and more videos like this.

Anatoly Aleksandrovich 3 개월 전

So is it possible to order such a kit or not?

A man should know everything. Alexandr Laguta

A man should know everything. Alexandr Laguta 89118838722 Valentine.

Write your phone number, let's discuss

A man should know everything. Alexandr Laguta, do you work to order? if yes, ready to discuss. need repair kits.

Anatoly Aleksandrovich 3 개월 전

Brad, there is a concept of metal fatigue, fix it, don’t fix it, suspension parts are not designed for repair, this method is purely for sale, guys, don’t take $500 to repair the suspension and you will be happy

+ Sergiy Prokopchuk and another down who doesn’t understand in principle what it’s all about

Obi Van Kinobi and fatigue here 🙂 .

Thanks for your expert opinion. Your definition clearly says that you are a high-class expert in the automotive industry. First of all, I recommend that you study the device and the principle of operation of this node. And you will immediately understand that “metal fatigue” is a completely different opera. If it’s clear, then when an oil leak is detected on the crankshaft oil seal, you need to replace the engine, and even better the car. Let me explain - it is not profitable for the manufacturer to sell crackers for 100 rubles, it is profitable for him to sell the whole support and put polyethylene crackers in it, which is enough for half a year at a cost of 2500 rubles. But this is everyone's business. I do not consider it profitable to throw out 10,000 per set once every half a year. I personally go for 2 years and pulled up once. Learn the device of the car.

culturally, I liked it. I didn’t come up with money for the set?

If there is no nichrome, then this is more or less normal. I ADVISE in this case to make a tolotnitsa in a bolt, I also advise: mill, dig or scratch diagonal grooves in relation to the axis from the inside of the cracker to improve lubrication of the entire finger ball. Long life to your car and good luck on the road.

Vitaly thanks for the addition. You can also make a shtaferka for lubrication in the lid, but it’s risky to sort out with the amount of lubricant, which will lead to a rupture of the anther.

How can I order this kit from you?

But what about the e39 suspension? There are aluminum levers

4 pieces if of course the price is adequate

A man should know everything. Alexandr Laguta, in terms of demand, I'm also ready to order a couple of repair kits)

Well done) cool done) the idea has the right to life