In detail: do-it-yourself chaise lounge repair from a real master for the site my.housecope.com.
We have already told you how make garden furniture do it yourself, including a chaise longue from an old cot and wooden slats. The base of a chaise longue made of wooden slats can serve for a long time. Unfortunately, the sun lounger seat is made of canvas or strong coarse calico and is not durable. Of course, the fabric on a chaise longue may not wear out, but it fade enough in the sun, so over time it has to be changed.
How to replace the fabric of the sun lounger?
To do this, it is enough to pick up a durable fabric. Remove old seat and measure dimensions. Cut a new one according to these dimensions and attach it to the chaise lounge after processing the edges.
The sun lounger seat can be replaced with a more durable one; you can make a durable and beautiful seat for this with your own hands. The most durable seat can be made from a corsage tape, which is used when sewing skirts and trousers to strengthen the belt.
To create a new seat for a chaise longue, you need to measure its dimensions with anchorage allowances. Then cut the corsage tape into pieces of the required length according to the width and length of the chaise longue. Then fold the long strips close to each other and intertwine them with short strips of corsage ribbon. Slide the intertwined strips tightly together and pin them together at the weaving points around the perimeter of the seat. Then sew each outer strip to the edge.
The seat is ready, but now it is necessary to cut another one of exactly the same size from strong coarse calico with allowances for seams around the perimeter of 2-3 cm. Wrap the free ends of the corsage tape on the wrong side and secure with pins.
After that, fold the wicker part of the seat and the coarse calico lining from the wrong side to the wrong side and sew the longitudinal sides. Then fasten the seat to the chaise longue using a stapler with large staples.
You can leave a response, or trackback from your own site.
A folding chaise longue chair is a pleasant accessory for a summer residence. Nowadays there are many types of sun lounger chairs that transform into sun loungers, but many still have inexpensive simple products with a fabric seat on an aluminum frame.
 |
Video (click to play). |
The first thing that does not stand the test of time is the fabric bed. It breaks from old age or under the considerable weight of a vacationer. This also happens, and it's as easy as shelling pears to fix it. For a while, the torn fabric can be sewn up, and for a major repair, you can buy a new material and replace it by removing the old one. Such renovation takes a little time, and now you are lying in an updated sun lounger, dreaming of a trip to the south and wondering what the cost of apartments in Yalta in this season.
If the folding mechanism of the chaise longue "sticks", it is possible that it is simply rusted. Try to smear it with technical oil without disassembling it. This helps in many cases. It happens that screws and screws are broken from time to time. In such cases, the chair must be unscrewed, and the old fasteners must be replaced with a new one.
Plastic sun loungers are quite durable, but they can crack too. You can glue them together, but not easy. If this place is under constant load, sooner or later the gluing will still crack. You can try to buy special adhesives for polystyrene, construction adhesive for plastic panels, fill in the crack and let the glue dry according to the instructions. They also use Poxipol and Supermoment glue - you just need to degrease the cracked place.
This method is more reliable. Warm up a sore spot with a thermal gun or a hair dryer, apply a thin reinforcing strip (if you can buy it) or finely chopped pieces of the same plastic. Heat until the plastic melts into a single mass.Instead of a reinforcing strip, you can use metal wire or staples from a furniture stapler that is always available in a summer cottage. The operation can also be performed using an electric soldering iron. This method is used by scooter owners to repair plastic bumpers.
After cooling, the appearance of the repaired place will not be very attractive: the scar cannot be made invisible. You can paint over it or stick on a cute sticker. If the seat is cracked, place a decorative pillow or cushion. Such a chaise longue can serve for a long time in the country if the gluing-soldering is done carefully.
To prevent cracks, you need to remove garden furniture in the house for the winter. It is designed for summer temperatures and does not withstand frost.
Repair of garden furniture made of wood Details of wooden furniture are best painted with durable and environmentally friendly, harmless materials, which include acrylic varnish, natural oil varnish, water-based coatings. In the form of additional protection of wood, it is recommended to use impregnations with a biologically active substance, which will protect the product from mold and rot. All these coatings should only be applied to dry and clean wood.
As a preventive measure, wooden parts can be periodically rubbed with wax, which creates a protective water-repellent film on the surface. Materials made of fabric (chaise lounges and similar furniture) are always exposed to the greatest mechanical wear. After conducting an audit and determining that worn-out fabric parts cannot be repaired due to many tears, it is better to replace them with new ones by cutting and stitching them out of teak or dense twill. It is necessary to choose the correct fabric width and it should be slightly less than the distance between the side bars.
Before installing a new covering, it is necessary to analyze the condition of the wooden structure and existing fittings. Re-tighten the screws and rivets and only then carefully remove the old canvas, which will have to be applied in the form of a pattern.
I draw your attention to the fact that this article is about the repair of sun loungers and folding furniture, as the most common garden furniture. So that's it. Before installing a new cover, for convenient work, it is necessary to turn the chaise lounge. Furniture nails for fastening the fabric or staples (installed with a stapler) are hammered from below on the transverse parts. The fixation of the fabric must be started from the middle of the transverse bar, then the outer ends of the fabric are attached at the ends of the bar, and the rest are attached from the middle to the edges after 6 - 8 cm.
More information on furniture renovation can be viewed on this blog page.
For repairing the seat and backs of folding chairs, it is better to use a more durable fabric - canvas. When cutting fabric, do not forget to take into account such detail as the fold and stitching of the fabric from all sides.The new cover is attached to the seat bars along the outer edges, but on the back, the cover is put on vertical bars and only then is fastened with nails or staples using a stapler
The new cover is attached to the transverse bars of the structure with nails or staples using a stapler at intervals of 6 - 8 cm.
Repair of folding metal furniture Metal folding furniture is usually made from tubes and does not require special care. Well tolerates the effects of precipitation and frost. Often there is metal furniture, the tubes of which have a plastic coating. Maintenance of this furniture is generally very simple and consists only in wiping it with a damp cloth. True, this furniture also has vulnerabilities - these are folding and unfolding mechanisms. Furniture structures that do not have protection on metal tubes after a while can be susceptible to rust, and in order to avoid this, it is better to periodically treat them with a protective wax composition, which is used for car cosmetics. The appeared rust must be removed with sandpaper, and these places must be primed and painted over with auto enamel of a suitable color.
Most metal garden furniture is made from aluminum tubes. Structures made of this material have much fewer problems and the main attention should be paid only to pivot joints, hinges and clamps, which are periodically lubricated with grease.
Canvas-covered metal furniture is sometimes fastened with cords on the underside, which perform the function of fastening and distributing the load. They are more susceptible to wear and tear and are more likely to be replaced than the canvas cover itself. Replacing the cord is done by threading it through rings called eyelets. The cord is stretched and the ends are secured. It is not recommended to tie knots at the ends of the cord. You just need to fold them in half and sew them with ordinary threads. To do this job easily enough, you need to use a simple rubber band device with hooks, which can be used to fix the canvas in the desired position. By this action, we will free our hands for comfortable work.
Replacing worn-out fabric elements is done in the same way as for wooden furniture. The fabric details are cut out and the edges are folded. Then the fabric is placed on a metal structure in the right place, the tubes are bent around and the fabric is temporarily fixed with pins. Using chalk it is necessary to mark the seam line along which to sew the fabric with harsh threads. For security, you can apply a double suture.
A thin layer of wax from car care products reliably protects the surface of metal tubes from rust.
The appeared rust is carefully removed with emery paper, and the stripping places are treated with a primer.
Replacing the cord is done by tightening it through the eyelets and then tightening it.
It is recommended to sew on the end of the cord and not to tie it in a knot.
Minor repairs Sometimes it is necessary to carry out minor repairs even on new furniture in the event of a rupture of the fabric. Do not despair, since such gaps can be repaired, only this must be done immediately without allowing an increase in the gap, which can lead to serious repairs. You can make repairs without removing the cover. You just need to fold the furniture to release the tension on the fabric and to work with it comfortably. In this way, it is possible to repair the fabric in places where the fabric does not bear heavy loads.In all other cases, the upholstery must be removed for a quality repair, which will have to be done with harsh threads using a needle with a large eye. The fabric will have to be sewn up with overcasting stitches, having previously folded the edges of the gap with each other. The first stitches must be made 10-12mm before the start of the break, and the seam must be finished by extending it behind the break and tying the thread in a knot. More information about furniture renovation can be found on my blog page here. Here is such a simple repair of garden furniture you can do it yourself.
here such “chips” need to be repaired on both sides 
Andrey there is not this plastic. I have the same chair a week ago. I will repair it myself. The plasmask is there to the ass, there is a bent metal tube that rests against this tube, which is screwed to the plastic. That tube should be straight. I think on the weekend to repair
Added after 3 minutes
On the 2nd photo you can see this tube. It is screwed to the pipe on which there is a plastic bracket and should be flat.
The chaise longue was invented in the 1920s in France and means "long chair". Since then, sun loungers have come a long way. Until now, no type of garden furniture can match them in style, mobility and ease of installation. Let us consider in more detail the types of designs of garden sun loungers and the technology for their manufacture.
A chaise longue is a simple, functional, mobile and indispensable attribute for a summer vacation. It is convenient to relax in the shade of garden trees near an artificial reservoir or to accommodate unexpected guests. Their design allows, if necessary, to quickly assemble them, while they take up little space. In addition, a correctly chosen sun lounger allows emphasize style garden plot, it harmoniously fits into the backyard interior. For example, wooden sun loungers blend harmoniously with the natural environment to complement your garden landscape.
For the manufacture of garden sun loungers, natural wood, plastic and aluminum are used. Each of these types of sun loungers has its own advantages.
Thanks to their distinctive characteristics and design, garden sun loungers made of different materials have a number of undeniable advantages:
- the ability to be in a half-sitting or reclining position, which provides maximum relaxation;
- due to the lightness of the material for making the chaise lounge (aluminum, plastic, wood) and the simplicity of the design, they are enough mobile and make it easy to move them from place to place;
- when folded, they have small dimensions, which greatly facilitates their storage;
- folding sun loungers can be used as rest benches;
- provide the ability to sunbathe;
- modern garden sun loungers have durability and a long period of operation;
- are distinguished by high aesthetic characteristics;
- not afraid of moisture and temperature extremes;
- not affected microorganisms;
- can be of various shapes and include armrests, footrests and water supports;
- high strength (can easily support a person weighing more than 100 kg).
Depending on the design, there are several types of garden sun loungers:
monolithic. This is a design where all the elements are rigidly connected to each other. These sun loungers are characterized by high strength and ability to withstand heavy loads. However, they also have significant disadvantages: the inability to change the angle of inclination of the back, it does not fold and is difficult to move from place to place;
The most common material for making a sun lounger on your own is natural wood. To make it, you need the following tools and materials:
- electric drill and a set of drills for wood;
- disk power saw;
- roulette;
- marker;
- square;
- screwdriver;
- rasp;
- sandpaper;
- wood putty;
- planed boards;
- wooden blocks;
- screws or self-tapping screws made of brass;
- bolts, washers and nuts for fastening.
Any person who has certain skills in handling carpentry tools is capable of building a sun lounger, since its design is not much different from a garden bench. Most often, a chaise longue is made from natural wood.
Work begins with building strong frame, which will require two longitudinal boards 190-220 cm long and two transverse boards 50-70 cm wide. The boards are carefully sanded and covered with a protective layer (varnish or stain), which will further protect it from the effects of external conditions.
To give the structure the required rigidity, the longitudinal and transverse boards are rigidly connected to each other. A so-called chaise longue frame is formed.
For the manufacture of seating the board is cut into uniform bars 50 - 70 cm long (10 - 14 pcs.) and with the help of self-tapping screws is attached to the chaise longue frame with a step of 1 cm.
Sun lounger back is made so that it can enter the inside of the chaise longue frame and at the same time there should still be small gaps between the frame and the back. Planks on the back frame are fixed with self-tapping screws along its entire length. To make the back aesthetically pleasing, it is advisable to round the upper edge of the planks.
To fix the back of the chaise lounge to its frame, holes are used located at a distance of 8-10 cm from the edge of the seat. The backrest is fixed with studs to both sides of the frame, and the level of its inclination is adjusted using special support bar... This bar with one end rests against the head of the backrest, and with the other it is inserted into the grooves of a special rail attached to the frame of the chaise longue. There should be about four such grooves (they determine a different angle of inclination of the back).
Finally, the entire structure is sanded sandpaper and covered with appropriate paint.
The second method of making a sun lounger is based on the use aluminum frame and sturdy fabric (tarp). To do this, two trapeziums are connected using crossbars 60 cm long. One of them connects the two upper corners of the trapeziums (where the top of the seat fabric is attached), the other - the two lower corners (the back of the chaise longue). The third crossbar connects the uppermost corners of the small part of the trapezoid and the bottom of the seat is attached to it. The seat is usually a piece of sturdy fabric 150 cm long and 60 cm wide. metal corners or spikes.
If you wish, you can build an awning canopy over the head of a seated person, which is attached to the back of the chaise lounge. The geometry of the canopy can have a variety of sizes, depending on the desire.
Do-it-yourself sun lounger - country and beach options. Ideas for the implementation of simple and stylish designs (110 photos)
A chaise longue is a comfortable and lightweight chair design that is used in recreation areas: on the beaches, by the pools, an integral part of the dacha decoration. It can be used to relax after a hard day at work, caress yourself in the sun or take a nap under the shade of the local trees, away from the prying eyes of the inhabitants.
In this article, we will talk with you about how you can make an ordinary wooden deck chair, we will give examples of photos, videos and instructions.
Brief content of the article:
First, we choose the appropriate type and modification of the sun lounger. The main material can be plastic, wood, synthetic fabric and aluminum. We have chosen the most affordable version of a sun lounger made of wood.
The choice of a tree is based on the following principles:
- material opportunities;
- preferences of the future owner:
- garden style;
- available materials at hand.
Choosing the future wood for your sun lounger, you pay attention to the mechanical properties of a particular wood species. For example, the most durable wood species are: ash, oak, larch and beech. With them, the design will delight you for many years. Wood is distinguished not only by the durability of its service, but also by its aesthetic component.
In turn, finished products from noble wood species are not the cheapest pleasure for the buyer. Such a thing is not always available to the average consumer who is trying to save any extra penny, because money is not superfluous. Before assembling the sun lounger with your own hands, look at the blueprints for the sun lounger.
A hand-made chaise longue will not only be an example of prudent spending of the family budget, but will also add a zest to the appearance of your fabulous summer cottage garden.
In magazines and newspapers, countless drawings, designs and ready-made solutions for wooden sun loungers have accumulated. The sizes of the homemade sun loungers are identical to the industrial models.
A folding sun lounger is much more comfortable than a regular one. It is easy to move around the territory, and in winter it can be folded and removed, even cloudy weather will not create any obstacles.
Parts purchased in advance for the structures of the future sun lounger must be processed, we impregnate the wood with an antiseptic and an anti-corrosion compound. We grind the surface to a perfectly smooth state. We put the resulting details aside and proceed to study the drawing.
If you turn to the latter, you will notice that the crossbars are fixed to the lower part of the legs. They allow you to fix the back in the desired position. When installing only one strip, it is first necessary to make cuts in the places where the strips are installed with a step of 5 cm, starting from 20 centimeters.
The backrest frame should have bolt attachment points, we retreat from the edge on each side by 41 centimeters, and at the very base of the seat - 43 centimeters indent from above.
First you need to assemble the backrest frame. The main load will be transferred to the bar 20 x 60 x 610 mm, so pay special attention to securing it. It should be recorded as efficiently as possible. It is customary to leave a distance of 1 centimeter between the slats. It will be needed to secure the fabric in the future.
Using the instructions described above, we assemble the main frame. Then, we connect 2 frames together - the back and the seat. Pay attention to the backrest frame, it is necessary to drill a hole on it from 2 sides, the distance is 41 centimeters for the backrest and 43 centimeters for the seat. Screw the two pieces together using nuts and bolts.
Attention! During regular use of the chair, the nuts may gradually loosen and loosen. To avoid this trouble completely, tighten the locknuts. For better fixing of the nuts, "Moment" or ordinary paint can be used.
To determine the degree of free play, first tighten the nut firmly, and then gradually loosen it. We give the paint and glue to finally set.
The next step is to mount the back support. The planks are secured with bolts and washers. Choose only thick fabric for the seats; tarpaulin, canvas and jeans are the best choices.
The fabric blank is folded in 2 times and stitched with an indent of 1.5 centimeters. After that, it must be turned out.We bend a piece of fabric on one side so that you can insert the rod and stitch it. We do it in a similar way on the other side.
We push each of the ends of the folded fabric between the planks and insert a rod into it. We will get a tightly fixed seat, and at the same time it will not cause any problems to dismantle it to wash it.
- Cooking (713)
- Bakery (128)
- Snacks (102)
- To my meat eaters (82)
- Salads (81)
- pantry (76)
- Desserts (70)
- Oven Cooking (51)
- SUMMER: every day (49)
- Fish (43)
- Borscht, soups, hot (38)
- Bread (29)
- FALL: every day (17)
- WINTER: every day (7)
- drinks, tea (6)
- Shot glass (4)
- Proper nutrition (4)
- Tips (4)
- Handicraft (637)
- little things for home (151)
- textile toys (99)
- Salvage on remake (92)
- weave + gazette (79)
- Beads, beads, bijoux (73)
- boxes and boxes (63)
- sculpt (60)
- Kanzashi, textile flowers (46)
- My wants (8)
- Amulets and their meanings (6)
- Masterclasses (2)
- My works (1)
- Kids (590)
- playing (167)
- Teddies (81)
- learning (72)
- knitted new clothes (63)
- educational program for a young mother (60)
- food (57)
- Reading Room (36)
- we sew (26)
- hats and other accessories (24)
- Early development (13)
- bed-roll (13)
- First dowry (11)
- order in the nursery (9)
- toppers for lapul (7)
- For Faith (5)
- 5-6 learning is not boring (4)
- Usefulness. (510)
- health (135)
- for yourself (126)
- I am a sculptor of my body (93)
- Traditional medicine (51)
- Relationship (35)
- soapy (32)
- Hairstyles (14)
- all for hair (1)
- Libraries, abstracts (462)
- Bookshelf (210)
- Scans, photos, drawings (171)
- Embroidery (408)
- Schemes (346)
- Decoration (36)
- rules, signs, lessons (14)
- helpers (10)
- Sewing & Fitting (351)
- clothing (136)
- for home, blankets, pillows-toys (81)
- bags, accessories (58)
- Curtains (29)
- Pechwork (22)
- Knitting (320)
- Dachnoe (255)
- DIY crafts (66)
- Piggy bank of ideas for future summer cottages (49)
- growing rules (46)
- Sharing Secrets (41)
- Pests (25)
- My pets (13)
- Design & Decor (176)
- ideas (79)
- all about plaster, putty (48)
- Interior (26)
- Furniture (14)
- Crochet (131)
- Knitting (97)
- Lessons (25)
- mohair (12)
- Home Renovation (87)
- e (74)
- Experienced Tips (44)
- KotoDom (9)
- Fashion & Style (9)
- Things to Do (8)
- Everyday matters (6)
- ..grandson (3)
- .. done (1)
- Irish, Burgess, Romanian. (6)
- Orthodoxy (3)
- ... for dummies (3)
- Household appliances (2)
Sun lounger (in English - "longish armchair") is often what is associated with the southern sea and palm trees, yet in Russian conditions it is pleasant to sit in the summer cottage in the sun in a soft armchair. Yes, it is difficult to exclusively buy a comfortable, portable, strong and light chaise lounge in the salons. At the same time, it is quite easy to develop a simple chair that also has all the advantages listed above.
To make such a sun lounger you will need:
* bar 35x35 mm (larch or birch) - about 6 running meters;
* bar 35x18 mm - 0.75 m;
* bar 12x12 mm - 2.2 m;
* "Cheerful" linen fabric 500 x 1250 mm;
* "Furniture" bolts with a semicircular head M12 85 mm long, washers and nuts for them.
We round off the ties (pos. 2), as shown in the drawing, and cut into the sidewalls on countersunk spikes. When assembling the frame, we glue all the joints and additionally fasten them with wooden pins (the inner frame and the footboard are assembled in the same way).
Rice. 1. Chaise longue assembly (the seat sheet is conventionally not shown).
1 - outer frame; 2 - inner frame; 3 - footboard; 4 - bolt M12 x 85 mm;
5 - washer; 6 - nut М12.
Rice. 2. The frame is external.
1 - sidewall, bar 35 x 35 mm (2 pcs.); 2 - screed, bar 35 x 35 mm (3 pcs.).
Rice. 3. The frame is internal.
1 - sidewall, bar 35 x 35 mm (2 pcs.); 2 - screed, bar 35 x 35 mm (3 pcs.).
Before assembly, all elements of the chaise longue must be well sanded (it is best to do this with an angle grinder (“grinder”) with a multi-lobed nozzle, primed and painted with bright nitro enamel.
Rice. 4. Footrest.
1 - sidewall, bar 35 x 35 mm (2 pcs.); 2 - screed, bar 35 x 35 mm (1 pc.).
Now we start cutting and sewing the seat fabric. On the short sides of a piece of fabric, on both sides, we make bends of 50 mm and sew them on a sewing machine. We insert one end of the canvas into the upper 8 mm gap of the outer frame and insert a piece of timber 12 x 12 mm from the back into the loop formed by the bend. We fix the other end in the same way in the slot of the inner frame.
The sun lounger is ready. Enjoy your stay!
A popular and uncomplicated way of making a do-it-yourself chaise lounge is a chaise longue made of material on the frame. This is a light and convenient summer cottage option that can be turned from a lounger into a chair and back with one movement of your hand.
You will need the following materials and tools:
- two slats made of wood 0.25 × 0.6 cm of different lengths (120 cm, 110 cm, 620 cm);
- wooden slats 2 × 2 cm (65 cm - 1 pc., 2 pcs. 60 cm and 50 cm);
- high-quality dense material 2 × 0.5m;
- drill;
- bolts and nuts of a suitable diameter;
- PVA glue;
- abrasive paper "zero";
- round file.
Choose a fabric that is durable and resistant to sunlight and moisture. Jeans, canvas or tarpaulin are ideal. It is better to take slats from oak, birch or beech (they have increased hardness and strength).
To make light sun loungers for a summer residence with your own hands, you need to prepare the slats of the required length and grind them.
Next, you need to collect the parts according to the diagram below. Note that marks "A" and "B" represent the main frame and "B" is the stop.
- you need to drill holes suitable for the selected bolts on each long rail, always retreating 7-10 cm from their edges; all irregularities should be immediately sanded with a needle file until smooth surfaces are formed;
- several holes should be drilled at the head of the frame (indicated in the figure "B") for the subsequent adjustment of the inclination of the seat back;
- to create a seat, you need to make two more holes at the ends of the long slats; their diameter must match the diameter of the prepared round strips (in this case - 2 cm); in order for the slats to hold tight, their ends should be greased with PVA glue;
- combine the structure "A" and "B" using the screws passing through the upper holes, then in the same way combine the resulting module with the element "B";
- stretch the fabric by wrapping the edges on the rungs and making several seams with strong threads (this procedure can be done even before the final assembly of the product, then the material can be sewn using a conventional sewing machine).
1. 
2.
3.
|
Video (click to play). |
Quoted 492 times
Liked: 18 users
