Do-it-yourself pleated curtain repair

In detail: do-it-yourself pleated curtain repair from a real master for the site my.housecope.com.

A widespread problem that we often encounter at work is the breakage of pleated blinds, and in this article we will look in more detail at the options and situations in which it is possible pleated repair.

So, the main types of breakdowns:

Frayed blind cords
Broken brackets or accessories for pleated blinds
Pleated control problems (with electric drive)
Fabric torn on pleated

The first and most common problem in our practice is the breakage of cords (cables, cords) passing inside the product. Simply put, over time, the cord passing through the folds of the fabric is frayed, and the curtain simply hangs on the window. If the product is more than five years old and is used every day, then this can be considered quite natural wear and tear. If a similar problem occurs much earlier, one or two years after installation, then this is either the result of improper installation of the pleated pleats (too strong or, on the contrary, insufficient stretch), or simply a factory defect. What to do in this case? Everything is quite simple, if the fabric and accessories are in good condition, then it is quite possible to limit yourself to constricting the pleated, i.e. replacing cords. Otherwise, it may be better to order a new product.

Problems of this kind are more characteristic of day-night pleated systems, large-sized products, or when using Black Out dense fabrics in products. Pleated curtain repair will consist of replacing the cords with new ones and adjusting the tension during re-installation on the windows. In inclined and ceiling models, there is a situation when metal support cables break, which look like ordinary cords. In this case, it is also possible to repair the pleated by replacing the cables with new ones. In general, we can say that this is the least difficult problem of all listed.

In order to repair the pleated blinds, you need to correctly measure the product, dismantle and transfer the broken blinds to us, after which disassembly, troubleshooting, cord hauling and replacement of accessories, if necessary, are carried out. Next, we hang the curtain on special equipment, pre-adjust it to the required dimensions and check its operation, then we can re-install it.

The third group of problems belongs to the category of “repair of electric pleated blinds”. Here, specific problems are added to the above breakdowns - the remote control does not work, the signal receiver is faulty, the power supply is burned out, programming of the curtain operation algorithm is required, etc., up to the replacement of the electric drive. Main difficulty

lies in the fact that, as a rule, there is no documentation with which you can draw conclusions about the method of connection, the scheme of operation and other features of the operation of electric pleated blinds. The most important thing in such a situation is to make a detailed diagnosis of problems, on the basis of which conclusions are already drawn about the replacement of certain nodes. A small plus can be the fact that almost all electric pleated blinds are made on the basis of Somfy's electrics, have an LW 25 drive and remote controls and receivers from the standard line, which means there should be no problems with spare parts.

The fourth least common pleated blind repair task is fabric replacement. The reasons can be very different - the fabric is torn, burned out, dirty, and even just tired of it in a few years. Here we are forced to disappoint - it will be problematic to repair the pleated, instead of replacing the fabric on the old product, it is better to order just a new curtain, and then, if there is such an opportunity.Why doesn't the fabric change? The thing is that the complex of works on replacing the fabric (disassembling the product, installing a new fabric, hauling and assembling) will cost 1.5-2 times more than making a new curtain with a new fabric, and this is simply not economically profitable. Moreover, when replacing fabric on an old product, there will still be differences - the fabric on neighboring windows is more burnt out, fabrics from different batches may differ slightly in tone, the fabric may be removed from the collection and many other reasons, so we we do not produce.

Video (click to play).

How to order pleated curtain repair? The general algorithm of actions is quite simple, firstly, you need to take a photo of the broken curtain and send it to us by e-mail along with a description of the problem and contact details. After that, after a while, it is advisable to call us at the number 8 (495) 508-17-20 and clarify whether your request was passed to the repairman. Further, our employee contacts you, clarifies the details of the repair, discusses the preliminary cost, terms and comes to pick up the product to pick it up for repair. After the product is repaired, the master brings it back and installs it. Also, if you wish, you can independently bring the product to us for repair and pick it up after repair, but be sure to remember to take measurements.

We hope you found this short article helpful!

Equipping your home, every hostess wants to bring something special and stylish to the interior. Something that will not only decorate her house, but also emphasize her exquisite taste. Curtains are one of the ways to express your individuality, display a touch of home comfort and beauty in the interior. In this case, pleated curtains will look the best on the windows. They can be the highlight of any interior. Do-it-yourself pleated curtains made by yourself will also be a testament to your skill. And this is not so difficult to do (Fig. 1).

Figure 1. Pleated curtains can be made of paper or fabric, and also be vertical or horizontal.

Pleated draperies are made of fabric or paper, and according to the arrangement of the stripes, they can be horizontal and vertical. You can independently choose the material for work.

However, paper curtains are an unusual solution for those who like frequent design changes and do not want to spend money on expensive fabric.

Figure 2. Scheme of pleated curtains.

In addition to being cheap, curtain paper has a number of other advantages:

Style. Now there are a lot of blanks for home interiors with a variety of patterns, embossing and appliqués on sale.
Versatility. From paper, you can even without the ability to cut any shape - vertical or horizontal, fan-like or other non-standard curtains.
different density. This allows you to make pleated blinds light for the kitchen, living room and blackout for the bedroom or nursery.
Availability. You can even use wallpaper to create your own pleated pleats.

In order to make paper curtains, you will need:

paper along the width of the window opening and approximately 1.5-2 times its height (length);
two wooden planks of the same width;
glue;
threads (preferably thick silk or nylon);
awl or gypsy needle.

Figure 3. Attaching pleated curtains.

When making pleated blinds at home, follow the instructions:

We take two wooden planks along the width of the window opening.
We fold the paper and iron it in small folds to the width of the bar.
We glue the upper edge of the paper web with glue to the bar, press it and let it dry. For fixing, you can use double-sided tape.
We make even holes along the edge of the paper with an awl or a needle and stretch the threads, fixing them on the top bar. If the curtain is too wide, you can stretch the threads every 40-50 cm of the curtain.For high-quality fastening, it is necessary to make holes in the wooden planks, fixing the threads with knots from above and gluing them.
We calculate the height of the window and the straightened blinds. We cut the paper canvas according to the required parameters.
We glue the paper to the bar below and fix the threads there.
We let the structures dry, and the pleated paper curtains are ready (Fig. 2).

There are several types of window curtains. One of the most economical will be the purchase of hooks on an adhesive basis. After you pass the threads through both wooden planks, fix their knots and make a loop. We fasten the hooks to the window, and hang the curtain on them. You can decorate the loops with beads, tassels or other decorative elements.

Another type of fastening can be considered special plastic structures that are attached to the window frame with self-tapping screws. Due to the peculiarity of the shape, you can pass the fixing threads through this design, firmly fixing the paper curtain.

Homemade pleated curtains are a great pride for any hostess, sewing them yourself, you can be proud of your talents and brag about this design decision to guests (Fig. 3).

Any window needs additional decoration, since in itself it is just a piece of a glazed wall opening. That is why curtains are so necessary. They will give the window not only beauty, but also a certain style, provide a certain mood not only for the room, but also for its owner. Pleated blinds are one of the most popular types of curtains. True, due to their specific shape and style, such curtains are not suitable for every room, due to their laconic severity. But you can make such pleated curtains with your own hands and choose the best design just for your taste.

With the help of pleated blinds in summer, you can save yourself from the scorching sun that penetrates the room.

Pleated blinds resemble blinds, but, unlike the latter, they are made from natural materials, that is, based on paper or specially prepared fabric.

The most common homemade options are pleated paper curtains. And although they represent an extremely temporary creation, such curtains can decorate any room if you have the taste and mood to create them. Paper curtains, unlike fabric ones, will not last long, since the slightest movement harms them, but what scope for creativity they open up. The surface of the curtains can be decorated with various patterns, including the creativity of your children.

Pleated blinds can be either vertical or horizontal. When choosing an option for your room, keep in mind that vertical stripes visually raise the ceilings, and horizontal ones expand the walls of the room. Create the right perception of your space.

Types of pleated blinds that will fit any type of window.

It will take about half an hour to make pleated paper curtains, if you are not puzzled by drawing a picture, but the result of the work will certainly please both the master and his loved ones.

For the manufacture you will need some material:

a roll of paper of sufficient width and favorite color;
large rulers;
strong threads;
glue;
awl;
buttons;
two hooks.

Preparing paper. Its width should be similar to the width of the window, or you will have to make two curtains. The length of the paper should be twice the height of the window. After the piece of paper is prepared, one of its edges is glued to the ruler, and the paper is folded into folds according to the accordion method. Having folded the entire roll, glue the second edge to another ruler. Fold the future curtain like an accordion, with two rulers at the top and bottom. Let the glue dry.

Then, with an awl, make two holes along the edges of the accordion, while both paper and rulers are pierced.Pass a strong thread through the holes, making two loops at one end, and fasten the ends of the threads to the buttons at the other. The design will be hung on the upper loops, and the buttons below will hold the curtain from below, preventing it from falling apart.

Then we take self-adhesive hooks, which have an adhesive back, and attach them exactly to the window frame. It is on them that you need to hang the curtains on the hinges made.

The lower ends of the threads can be decorated with various materials (colored threads, beads, bells, tassels, etc.). The fabric of the curtains itself can also be decorated, it will work especially well if you entrust this work to children. They already have enough imagination and energy for the most original curtains that you have ever seen.

Scheme of the device for pleated curtains.

The very simplicity of making curtains hints that such decorations can be made often, especially on the eve of any holidays or just significant days. In just half an hour you can transform a room from a golden autumn into a bright New Year's forest, with the help of young artists you can display various memorable events that happened to them over the summer. And how surprised your guests will be if for each visit they will expect new thematically painted curtains that transform the room unrecognizably.

Such curtains are perfect for so many rooms, while they can carry a different load. Somewhere this is a pure decoration, and somewhere - protection from the sun. The latter is quite in demand in such buildings as summer houses, gazebos, attics, terraces, and other premises. The very design of the curtains implies good protection from the sun's rays, besides, with the right choice of quality and color of paper, you can achieve a pleasant soft twilight of your favorite color or just diffused light that gives comfort to the whole room.

Plisse makes it possible not only to wake up in a pleasant twilight, but also to see a wonderful drawing on the window, created by oneself or by the hands of children. And these drawings will never get bored, because you already know how to make new curtains, which means that nothing will stop you from creating a new masterpiece today that will delight you in the coming days.

In case you don’t have children or talent as an artist and you can’t create something original and beautiful, you can turn to specialized companies for help. You just need to show them the desired pattern and material for the curtains, and soon you will be able to enjoy the beautiful curtains on your windows.Pleated paper curtains are also suitable for a strict office, lecture halls - where you need to focus on something important. But only such options must be done without drawings, because in such rooms one cannot be distracted.Making your own pleated blinds is quite simple, all the costs cannot be compared with the satisfaction that you will receive by watching the result of the work on your windows.

We wish you good luck! Make the mood with your own hands!

Being engaged in home improvement, every hostess tries to give the interior something stylish and special: something that will not only decorate her home, but also emphasize refined taste. One of the ways to express your individuality is curtains, which reflect a touch of homely beauty and comfort in the interior. In this case, pleated curtains, which can be made from paper with your own hands, will look best on the windows. They can become the highlight of the whole interior.

Pleated draperies are made of paper or fabric, and according to the arrangement of the stripes, they can be vertical and horizontal. You can choose the right material for your work. But paper curtains are original solutions for those who prefer frequent design changes and do not plan to spend too much money on expensive fabric.

In addition to low cost, curtain paper is characterized by the following advantages:

style. Today, a lot of blanks for the interior are sold with different embossings, drawings and applications.
different density.This indicator allows you to make pleated curtains opaque for a nursery or bedroom and light for the kitchen.
Versatility. From paper, you can cut a variety of shapes - horizontal or vertical, various non-standard curtains.
Availability. In order to create a pleated do-it-yourself, you can even use wallpaper.

In order to make curtains, you will need:

glue;

paper along the width of the window and approximately 1.5-2 times its length (height);

two wooden planks of exactly the same width;

threads (it is desirable to use thick nylon or silk);

gypsy needle or awl.

Pleated curtains are made at home, following the instructions.

We take two identical wooden planks along the width of the window opening.
We fold the paper and iron it to the width of the bar in small folds.
We glue the upper edge of the paper to the bar with glue, press it and let it dry. For high-quality fixation, it is better to use double-sided tape.
We make even holes along the edge of the paper using a needle or an awl, after which we stretch the threads, fixing them on the top bar. In the event that your curtain is very wide, you can stretch the threads through 40-50 cm of the canvas. For high-quality fastening, you will have to make holes in the wooden planks themselves, fixing the threads on top with knots and gluing them.
Accurately calculate the height of the straightened blinds and windows. Cut the paper sheet according to the desired parameters.
Glue the paper to the bar below, then fasten the threads there.
We are waiting for the design to dry, and your paper pleated curtains are ready.

As you can see, making pleated curtains with your own hands is not difficult and does not involve serious costs.

How to fix pleated blinds correctly?

It should be said right away that the fastening of pleated curtains can take place in different ways. One of the most budgetary options is to buy hooks on an adhesive basis. As soon as you pass the threads through two wooden planks, you need to fix their knots, and then make a loop. Attach the hooks to the window and then hang the curtain. You can also decorate the loops with tassels, beads and other decorative elements.

What is the best way to fix pleated blinds on a window?Such structures can be fixed both above the window and in the frame of each window, since the curtains are quite light. Mounting on the frame provides more freedom in opening windows, but an open window can let the sun's rays into the room.Mounting above the window can be done to the ceiling or wall. Ceiling attachment will be preferred as it creates a holistic impression of the interior of the room. Mounting on the frame will not allow you to use the window sill, grow flowers on it, since with closed curtains they will sorely lack light.There are several ways of fastening, and each person chooses them taking into account his own convenience. An economical way to attach a paper curtain to a window is to buy self-adhesive hooks. The threads are passed through the lower and upper wooden planks, then they are fixed into a loop. Hooks are attached to the window, and then a curtain is hung on them. Loops that remain in sight can be decorated with thread tassels, ribbons, beads, or in any other way you like.Another method of attaching paper pleated curtains involves the use of a ready-made plastic structure, which must be fixed to the window frame using self-tapping screws. The threads are passed through this design and fixed, as stated in the instructions.

Such curtains can become a source of pride for the owner of the apartment, since not everyone comes up with such a simple solution. The disadvantage of the design can be considered the fact that such curtains cannot be used in sloping window openings. Therefore, they are not suitable for decorating attics and attics.

If the purchase of new blinds does not fit into your plans or budget, but you have one free evening and a charge of creative inspiration, then we suggest you make the blinds yourself from improvised means.

We have compiled 2 step-by-step master classes on how to make blinds with your own hands and 1 master class on how to update and beautifully decorate horizontal blinds.

You can make such paper blinds in just a couple of hours, and if you still have wallpaper after repair, then you don’t even have to go to the store. Pleated blinds will last for about a year, and then you can just make new ones, because that way is so simple, beautiful and economical. And paper blinds are great for decorating the windows of country houses and co-creating with children.

To make blinds from wallpaper as in the photo above, you will need:

A roll of paper wallpaper (only paper wallpapers are suitable, since vinyl and non-woven will not be able to assemble into an accordion);
Auxiliary materials: scissors or stationery cutter, ruler, pencil;
Awl or hole punch (better awl);
A rope longer than the height of the window and 5-7 mm thick or a thin satin ribbon;
Retainer with end cap of suitable color;
If desired, two more tapes of any width and length 2.5 times the height of the window. These ribbons are only for decoration;
Double-sided tape (or glue) and Velcro to match the wallpaper, if you want to make curtains with a swag around the edge.

If you want to make horizontal blinds without a swag, then you need to make through holes in two places, as shown in the picture on the right. And, of course, in this case, either two ropes or one long one will be required.And to make horizontal blinds more interesting, you can decorate them with ribbons, which, in addition, will hide the ropes and fix the curtains at the desired level. An example of such a decor, see the photo below.

Instead of a retainer, you can use a button of a suitable size with two or three holes, as shown in the photo below.

Of course, each accordion blank can be cut to width. But, as a rule, wallpapers with a standard width of 53-55 cm are quite suitable for a standard window. But if you need more blinds, then you can choose a wallpaper with a width of 1 m.

And here is a selection of photos of different ideas for your inspiration.

If you prefer ethnic or eco-style, then you can make paper blinds from newspapers, or rather from newspaper tubes. This method will require a little more time and effort from you, but such blinds will last longer.

Tip: If you prefer, you can use wooden twigs, plastic straws, or reeds instead of newspaper straws.

To make blinds from newspaper tubes, you will need:

For one window with a height of 1 m, you need to prepare about 200 painted and dried newspaper tubes with a length slightly more than the width of the window;
Auxiliary materials: scissors and PVA glue;
A coil of rope to match the tubes, for example, jute twine or just nylon twine is suitable for ethnic or eco-style blinds;
Rings for curtains (2 pcs.);
If desired, a latch with a limit switch in order to make a lifting mechanism.

How to twist newspaper tubes and lengthen them, see this video tutorial from an experienced craftswoman Elena Tishchenko:

And here is a useful video on how to paint newspaper tubes also from Elena Tishchenko:

We lay out the newspaper tubes in a row on the floor and align;
We begin to tie the tubes with each other: we fold a long rope in half, attach a ring to it for attaching to the window, tie one or two knots, then tie the first tube and make 1-2 knots in the same way, take the second one and repeat the steps until all the tubes are contact. Then we proceed to tying the tubes from the opposite edge, but this can also be done in parallel with the first row.

Tip: you can connect the tubes with a chain of air loops as shown in the photo on the right.

Now we need to align the edges of the blinds. To do this, mark the cutting line of newspaper twigs with a ruler (along the entire curtain fabric) and carefully cut off the excess with scissors, moving from bottom to top.
And finally, we proceed to the manufacture of the lifting mechanism. To do this, you just need to tie one loop each to the upper and lower edges of the curtains (in the middle), thread and fasten the rope to the bottom loop from the back of the blinds, and then stretch it into the top loop. At the end of the rope, you need to put on a retainer with a limit switch so that by pulling the rope, you can easily raise the curtain halfway and secure it in this position.

Boring "office" plastic, bamboo or wooden blinds can be updated and decorated with your own hands specifically for the color scheme and style of the interior of the room.

To decorate the blinds as in the photo above you will need:

Wallpaper or any colored paper;
Plastic, wooden or bamboo blinds;
PVA glue and brush;
Scissors;
Ruler, pencil.

We measure the width, length and number of lamellas;
On a roll of wallpaper we draw strips in the same quantity and the same width and length as the lamellas;
Then we mark on the markup the places of the holes into which the ropes are threaded - here the strips will need to be cut into three parts so that in the future we can bypass these places in the process of pasting the lamellas;

Video (click to play).

We cut the strips along the marked lines and, as already mentioned, cut each strip into three parts.If you need to save a drawing or wallpaper pattern, then you need to cut the paper in strict sequence, and in order not to get confused, you can make notes on the reverse side;
Finally, glue the paper strips onto the slats. It's not scary if the strips do not lie down quite evenly, as a result, the flaws will not be very noticeable.

Rate this article:

Grade 3.2 voters: 82