The cost of a windshield chip repair kit is several times less than the amount you hear in the service. And the choice, of course, is yours. But there may be several chips during the season, then it is probably easier to change the car right away. Windshield chip repair is within your power. Do not doubt.
Repair of chips on the windshield is preferably done in the garage and in appropriate sunny weather. Although this is not an axiom. There is no weather - there is a wife's hair dryer or a neighbor's building hair dryer. There is always a way out.
In the kit there is a special metal bracket for fixing the syringe to the "nipple" of the injector. After creating pressure in the syringe, the design is left for the time specified in the instructions. Typically 4-6 hours.
Everything. The windshield chip has been repaired, it is possible to polish the repair site or, once you have taken it, the entire windshield. The goal is achieved, the chip is eliminated, the risk of a crack on the windshield is minimized. Let's hit the road. Let as little as possible you have to repair chips on the windshield.
VIDEO
Good luck to you car lovers.
Repair glass yourself!
Guaranteed to hide damage on the windshield by 99%!
What kind of chips are we talking about? What type of glass is suitable for repair? What damage diameter is acceptable to restore the integrity of the glass? These are the first questions that come to the mind of drivers before deciding to buy a windshield chip repair kit.In order to make a decision as soon as possible and put the goods in the "Basket", the Meleon online store answers questions.
What kind of chips can a professional glass repair kit handle?
Anything happens on the road, and chipping even on a new foreign car is a common occurrence. A do-it-yourself windshield repair product involves hiding cracks and dents that appeared due to the rebound of gravel, pebbles or any other hard material from under the wheels of the car in front - usually gravel flies out from trucks and vans. Also, the kit easily hides cracks and gouges in the glass resulting from a bird hitting the windshield. Unfortunately, it happens that a bird crashes into the windshield of a fast-moving car, and a chip is formed from a strong blow with its beak.
The next type of damage is the intentional scratching of keys on the glass. Alas, in life there are ill-wishers who may well scratch the body or glass of the car at night. Don't worry, the windshield repair kit fix scratches with ease!
Which glass is suitable for repair?
Cars from the 90s and younger have not just glass, but a film sealed in the middle, framed by sheets of glass inside and out. When the glass is damaged, it does not fall out, as happens with Soviet car models, but a gossamer goes along it. However, the glass stays in place by being held in place by the film. It is for such a structure that the “rescue” set for glasses is intended.
Soviet vehicles have ordinary glass, and the set will not be able to hide severe damage. Glass Chip Masking Gel restores normal visibility on both tinted and non-tinted windows.
Does the kit mask a large area of damage?
One set is enough for a chip on glass with a diameter of up to 3-4 centimeters, since the amount of polymer that seals the damage is 2 ml. If you are masking a long crack, then 1 tube is enough for the entire windshield. If the chip is through, it is better to buy 2 packs of the product, so that it is probably enough to patch the hole.
Dosing syringe - 1 pc.
Windshield Repair Resin - 2 ml
Sucker with pedestal - 1 pc.
Protective film - 3 pcs.
Adhesive disc - 1 pc.
Blade - 1 pc.
User manual
Replacing a car windshield is an expensive procedure that every driver tends to delay as much as possible, waiting for the “critical” moment, that is, broken glass. BUT if you take repair actions before the cracks themselves appear, you can save a lot and extend the “life” period of the car windshield.
In the first variant, cracks appear immediately after the physical contact of any object with glass. Simply put, a crack is formed when a stone, bottle or other solid object "flies" into the glass. In such a situation, it is necessary to change the entire glass.
A long-term option for the formation of cracks involves their direct "development" on the windshield of the car. Cracks appear from small chips that form on each glass. Such chips appear after sand, stones and other things get into the glass.
Since car glass is multi-layered (triplex), it can be repaired, and it is possible to eliminate the chip before it transforms into a crack.
The driver must carefully monitor the windshield of the car if he does not want to allow the formation of cracks on it. Chips are not always visible from the inside of the car, and therefore experts recommend regularly (at least once a month) checking the windshield for their presence.
Please note: Most of the chips on the windshield can still be seen from the inside of the car. They are especially noticeable at night, when artificial lighting is created around the car. At such moments, even minor chips glare strongly, refract light and create difficulties in viewing.
Do-it-yourself windshield repair is not the easiest procedure in car maintenance, and it is recommended to resort to it only if you are confident in your abilities and have all the necessary equipment. In other situations, it is often more profitable to contact a service center where specialists will remove chips from the windshield.
The first step is to decide what is required to repair the chips on the windshield. The list of tools and consumables is solid, but there is nothing exotic among them, and everything you need can be purchased at the nearest hardware and automotive stores.
The following tools will be required for self-repair:
Please note: Another tool that is good to get before starting work is an ultraviolet lamp. It allows you to speed up the process of solidification of the polymer.
It is recommended to carry out work on repairing chips on the windshield in a garage box. This is due to the fact that it is necessary to minimize the likelihood of dirt and moisture getting on the repaired fragment during operation. On the street, there is a possibility that sand, pollen, leaves, etc. will get into the polymer, and the possibility of rain is also possible.
Before starting work, it is necessary to prepare the place of the chip. If the chip is an inconvenient shape to repair, use a scriber to expand and level it. A mirror and a flashlight can help determine the boundaries of the chip. Next, the chip should be thoroughly cleaned, for this:
First, using wet wipes, remove glass, dust and dirt from the chip, as well as from the nearby area;
Next, wipe the place with dry wipes;
Use compresses or a pump to blow out the chipped area. You can also use a hair dryer to dry the defect, if required.
Important: Use for wiping should be wet wipes treated with alcohol, but without special detergents. Excess "chemistry" can settle on the surface of the defect, as a result of which the polymer "seizes" worse.
When the chip is prepared, go directly to the repair. Do the following:
Install the injector in place of the damage. Most often this is done using suction cups, but, depending on the model, the installation method may vary. Read the instructions for the device to install it correctly;
Pour the selected polymer into the syringe. Please note: If you purchased a two-component polymer, that is, it contains two tubes, read the instructions for it in order to mix it correctly and fill the syringe ;
Next, pour the polymer through the nipple of the injector into the chip on the windshield of the car. Repeat the polymer injection operation two times in a row;
Leave the polymer to dry completely, which may take up to 24 hours. Please note that you can speed up this process if you use an ultraviolet lamp;
When the polymer is completely dry in the chip, it is necessary to remove its remaining excess;
The final step is polishing the repair site or the entire windshield.
On this, the process of repairing a chipped windshield can be considered complete. Please note that if you find a chip on your windshield, you need to start repairing it as soon as possible. When driving, significant pressure is exerted on the glass of the car, which can lead to the formation of a crack from the chip and the need to replace the entire windshield.
Consultant hours of operation:
+7 (812) 988-29-29
+7 (812) 988-29-29
Consultant hours of operation:
We provide an extended warranty on AGC windshields, with the right to free chip repair or glass replacement, paying only for the cost of installation.
"AutoTriplex" - the official dealer of JSC "AGC Borsky glass factory"
Dosing syringe for polymer supply - 1 pc.
Glass chip and crack repair polymer – 2 ml
Sucker mini-injector - 1 pc.
Protective thermoplate for polymer drying – 5 pcs.
Adhesive disc - 2 pcs.
Scraper blade - 1 pc.
Instructions for use
Prices for the repair of chips and cracks in our centers here.
The principle of windshield repair using this DIY kit is as follows:
Hello dear readers of the my.housecope.com/wp-content/uploads/ext/2102 blog!
In this article, we will look at how to repair a chipped windshield.
Minor damage to the windshield can develop into a crack at any time. It usually happens when you least expect it. When the glass cracks, it will be more difficult, expensive, and sometimes impossible to return it to its previous appearance. A chipped windshield needs to be repaired. Before repairing the damage, it is advisable to close it immediately with adhesive tape. This will prevent dirt and moisture from getting inside the chip.
Windshields consist of several layers. Two thin glasses are glued together with a polymer layer. The outer parts of the glass are hardened. The polymer center layer is elastic and acts as a damper, reducing the possibility of glass damage from small stones flying from the road. If, nevertheless, the stone damages the glass, then the outer glass is damaged.
Chips and cracks are two of the most common windshield damage. Some damages are more complex and have a configuration of several types of damages. There are ROLAGS standards (Repair of Laminated Automotive Glass Standard - Automotive Windshield Repair Standard), which define the shape (by which the names described below are given) and maintainability, depending on the size of the damage.
Star damage. It has a central damage, from which several cracks extend. It usually has an X-shaped appearance. Such damage is repairable if it does not exceed 6–7 cm in diameter. Teschinki extending from the center of damage require drilling to stop their spread.
Bull's eye damage has a primary chip surrounded by a secondary non-cracked fracture. Such damage is considered suitable for repair if its size does not exceed 2.5 cm.
A Crescent lesion is defined as a partial, incomplete bull's eye. In English it is called Half moon (half moon, crescent). To be repaired if it does not exceed 2.5 centimeters.
Combined damage is defined as damage with multiple characteristics. That is, it has the characteristics of "Star", "Bull's Eye" damage, as well as cracks of various sizes coming from the epicenter of the damage. Such combined damage is considered repairable if its diameter (excluding cracks) does not exceed 4–5 cm.
The windshield consists of several layers. The layers are interconnected by a polymer. If the middle layer of glass is damaged or the glass is damaged through and through, then the glass cannot be repaired and must be replaced.
Damage with recesses and a missing part of the glass are repairable if the diameter of the recess does not exceed 3 mm.
Long cracks cannot be repaired (at least not cost-effectively). Therefore, it is important to have time to repair the chip before it develops into a crack.
All types of windshield damage are repaired in the same way. The damaged area is cleaned and dried. Next, the air is pumped out of the damage and the polymer is injected under pressure. The polymer that is injected into the damage cavity is transparent and has the same refractive index as glass. Thus, after a properly carried out repair, the damage becomes almost invisible from any angle.
The area to be repaired is then illuminated with ultraviolet light for 5 minutes to activate the polymer. The next step is to cut off the polymer residues from the glass surface and polish the repaired segment.
It is necessary that the glass be clean and dry before repair. Do not use detergents or glass cleaners before repairing the windshield. It is better to use the cleaner and degreaser that come with the repair kit. If the glass is damp, you can use a hair dryer to dry it. When repairing, it should be approximately room temperature.
There are different types of repair kits. Most inexpensive repair kits are simplified versions of professional chip repair equipment. The procedure for repair using different kits may vary, but the main principle is the same.
Professional kits are designed for use in specialized workshops. Their cost is from 500 US dollars and above. They are sold in convenient cases, which contain all the necessary tools and consumables for repairing damaged windshields. Such sets include:
injector holder (bridge)
mirror for installation on the back of the glass. It helps to control the installation of repair fixtures and the repair process.
portable cordless drill. It is used to drill the ends of cracks to stop their propagation.
UV lamp. Used to quickly activate the polymer after injection.
A set of polymers for injection into the damage cavity.
Degreasing wipes, adhesive tapes, glass polishes, etc.
Professional kits allow you to repair any repairable damage, including some types of cracks.
Some professional kits may include several identical tools to repair several chips at the same time.
As mentioned above, most inexpensive windshield chip repair kits are simplified versions of professional kits. They are much cheaper and do not contain some of the tools and fixtures that are in professional kits. Next, we will look at repairing a chipped windshield using an inexpensive 3M repair kit.
To repair a chipped windshield yourself, you can purchase a relatively inexpensive chip repair kit. In our example, not the cheapest, but not the most expensive non-professional kit is given.
3M offers a special kit designed to repair small chips, "stars" and cracks in automotive glass. Some small chips can be repaired so that they are almost invisible. Larger lesions can be stopped from spreading further and made less noticeable.
This set can be used in your own garage. No special conditions are needed for this.
So, let's look at the repair process using the example of a small chip step by step:
To begin the process of repairing a chipped windshield, you need to remove any remaining pieces of glass. In the kit for this there is a special rod. You can also use a blade.
Care must be taken to clean the damage itself and the surface of the glass around the chip to ensure good adhesion for the suction cups of the device included in the kit. It is important to check that no particles and dirt remain in the recesses and cracks of the damage.
Next, you need to assemble the fixture and install it on the glass so that its central part is above the center of damage. The adapter must be positioned perpendicular to the surface.
You need to check the location of the “bridge” from the inside again before moving on to the next step. Note that a paper towel has been placed near the center of the device to prevent the resin from flowing onto the glass.
The next step is to use the special injector included in the kit to fill the chamber with a special polymer.
Screw the injector into the cavity. It is necessary to inject the polymer into the damage cavity and pump it out again to remove air bubbles. Next, the polymer again needs to be injected with pressure.
Next, you need the whole structure to stand for 30 minutes, preferably under the sun, after which you can dismantle the device.
Next, the leaked polymer residues are removed. And the repair area is wiped with a cleaner.
In the photo you can see that the chip has become invisible.
No need to repair the windshield in the sun. The sun's rays will accelerate the curing of the polymer before it spreads, which will degrade the quality of the repair. After injection and spreading into the polymer cleavage cavity, you need to apply an ultraviolet lamp or leave the repair area under the sun.
Some kits contain an adhesive film and require it to be applied to the area to be repaired some time after the resin has been injected. With some types of damage, it helps to keep the polymer from flowing out at the initial stage of hardening.
Small cracks must be stopped from further spread by drilling a small non-through hole at the end of it.
When driving behind another car on the highway, it is easy to get hit by a small stone in the windshield, body or optics. First of all, these are chips and cracks on the windshield. In this article, we will analyze the main types of damage, find out which defects we can fix on our own, and which ones are better to contact a specialized service station.
The windshield can be safely called the most vulnerable point of the car. Various defects appear on its surface during operation. They can be divided into the following:
Scratch. This defect occurs upon contact with a sharp object, the hardness of which exceeds the strength of glass. The depth of the scratch does not allow a crack to form. Superficial scratches occur due to sand particles that fall on the car.
Round chip "bull's eye". This is the most common defect, the chip has the shape of a circle without cracking.
Crack. Such a defect is the most dangerous.In addition to worsening visibility, the crack tends to grow while driving.
Combined defects. They are complex in structure.
Next, we will consider in more detail how to remove some defects from the windshield with our own hands. Find out what consumables and special tools are needed.
Remember that imperfections in the windshield not only make your vehicle look worse, but can also cause an accident. Don't put off windshield repair!
The main reason for the appearance of small scratches on the glass is ordinary sand. It settles on glass, wiper rubber bands, seals and on a rag that you wipe your car with. Sand particles constantly scratch the surface. Therefore, visibility decreases over time. Polishing will help restore transparency to the windshield. Sanding is not recommended. Most likely, it will not be possible to carry out such processing independently.
For polishing the windshield, you can use folk remedies and professional materials. Before you start repairing scratches, wash your windshield thoroughly. Wipe it with a dry, clean cloth or a special glass cloth. Don't use newspaper.
To eliminate small scratches with improvised means, use toothpaste or GOI paste. The best effect is achieved when using GOI paste. A small portion of the paste is applied to a clean cotton swab or a piece of felt. Then rub in a circular motion on the problem area.
Reapply the paste and rub in circles in the opposite direction. To speed up the process, you can use a grinder with a felt nozzle.
Various types of polishes are available for polishing windshields in automotive supply stores. Before using pastes, we recommend doing a trial polishing on a small area of glass. The composition of polishes includes various kinds of reagents and it is not known how they will act on the glass surface.
Wash the glass thoroughly after polishing.
Removing deeper scratches is difficult. In this case, there are two options: you must come to terms with this state of affairs, or act drastically and replace the windshield.
VIDEO
After a slight blow to the windshield, a small chip remains on it. Such a defect most often occurs when driving on a freeway, where a higher speed is allowed. And even a small pebble from under the wheels of a car in front can cause damage. As soon as you find this kind of defect, try to quickly take measures to protect the chipped area from contamination. This will help the usual transparent adhesive tape. Stick it on the outside of the defect. Such protection will further facilitate the repair of the windshield and make it less noticeable.
Do not delay with the repair. A chip, or as experts call it a "bull's eye", with a probability of 80% can cause a crack to form over the entire surface.
To carry out high-quality windshield repair, it is necessary to prepare the following tools and materials:
injector for uniform supply of photopolymer to the cleavage site;
applicator or bridge for precise positioning of the injector over the chip;
small mirror;
photopolymer for glass surface repair;
protective film;
ultraviolet lamp to speed up the repair. If there is no lamp, then the photopolymer will harden in the sun, but it will take 24 hours for complete polymerization.
For self-repair of chips and cracks, special kits are produced:
pump for creating a vacuum;
injector or syringe for photopolymer;
blade;
glue.
If you want to get rid of chips and cracks with your own hands, then pay attention to the windshield repair kits from DoneDeal, HANDY-MAN.
Carry out repairs in the shade.The adhesive is UV sensitive.
Before starting the repair, clean the defect area with plenty of water and dry it with a stream of air.
Position the applicator or injector bridge exactly over the center of the defect. Check the accuracy of the installation from inside the car or using a small mirror.
Apply photopolymer adhesive to the chip using an injector.
Apply protective film. It will not allow the photopolymer to spread on the glass.
Illuminate the repair area with a UV lamp. The ultraviolet helps speed up the curing of the photopolymer. Usually 2 to 4 minutes is enough.
Carefully remove the protective film and adhesive residue with a sharp, thin blade.
Polish the repair area with felt.
VIDEO
Every driver needs to know that any crack in the windshield weakens the rigidity of the body. If such a car gets into an accident, the consequences will be much sadder than with a vehicle whose glass is intact.
Cracks up to 10 centimeters can be repaired with your own hands. To fix the defect, you need a tool:
small drill with a thin diamond drill;
adhesive photopolymer;
injector for glue-photopolymer;
flashlight;
UV lamp.
Rinse the crack thoroughly and dry well. Do not use detergents, they impair the adhesion of the adhesive.
Determine the size of the crack.
Relieve tension at the site of the defect. To do this, it is necessary to make through holes at the edges of the crack. This will stop the propagation process.
Launch the photopolymer into the crack using the injector.
Illuminate the defect area with ultraviolet light for 2-5 minutes.
Polish glass.
If a complex defect has appeared on the windshield, for example, a chip with cracks radiating from it, then it is better to use the services of car glass repair specialists. Do not repair cracks larger than 20 cm and chips larger than 3 cm in diameter by yourself. Entrust such defects to the masters, because their elimination requires special equipment and certain skills.
The cost of windshield repair depends on the condition of the damage, the extent of the defect, and the materials used. But in any case, such repairs will cost less than replacing the windshield.
Video (click to play).
Chips and cracks can be repaired both from the outside and from the inside. The strength of the glass is restored completely, transparency - up to 90%. The eliminated defect is noticeable only at a certain angle. Repair will take from 30 minutes to 3-4 hours. An article and a video on the topic will help you correctly assess the forces and make the right decision. Happy repair!
