Do-it-yourself car glass chip repair

In detail: do-it-yourself car glass chip repair from a real master for the site my.housecope.com.

Now there are various offers on the market to protect glasses from damage. One of the most popular options is to stick a protective film on the glass, which protects an expensive part from damage, and many car owners prefer not to wait for the next stone in the glass with the subsequent repair or replacement of this glass.

But what about the situation if the windshield of the car was nevertheless damaged, and small cracks and chips already appeared on it? Go to a car service for an expensive repair or try to fix this problem yourself?

If you decide to repair cracks on the windshield with your own hands, we will tell you what materials and tools you will need and how to do it in accordance with all the rules.

To begin with, we will determine what minor damages can be easily and simply repaired on our own, without replacing the windshield.

Glass chips in any part of it. Chips should be repaired immediately before they turn into deep cracks, otherwise you will not be able to avoid glass replacement.
Simple cracks. Often they appear as a result of a sharp and constant temperature drop due to improper warming up of the car, non-compliance with the temperature inside the cabin and outside.
Branched cracks. Unlike simple ones, branched cracks are quite difficult to remove. Untimely elimination of a simple crack can lead not only to the appearance of deep branched cracks, but also to the forced replacement of the windshield.
Jagged. The reason for their appearance is a rough mechanical effect.

Video (click to play).

So, in order to repair cracks in glass yourself, you need to prepare the following kit:

photopolymer adhesive. This adhesive is intended for the repair of automotive and other glass. The adhesive has a sufficiently high coefficient of transparency and reflection of sunlight, so after application it remains completely invisible on the glass. The hardening of the photopolymer occurs due to the action of directed ultraviolet radiation. Curing time - 15 minutes (when using a UV lamp) and 45 minutes (when drying naturally).
Glue injector. Using an injector, the polymer is applied to a crack or chip in the glass. Injectors can be either plastic (disposable) or metal (reusable). We recommend purchasing a reusable injector.
Electric drill. It allows you to remove excess stress from the glass by drilling the edges of the crack to prevent its possible increase. Thin diamond drills are used to process cracks.
UV lamp for drying glue.
Scriber. It is used for accurate cleaning of the edges of the crack, as well as the working area around it.
Applicators. Allows you to mount the injector on the windshield.
Liquid and wipes to remove excess dirt and moisture.
Pump for cleaning the edges of the crack from dirt and dust.

Having prepared the necessary set of materials and tools, we proceed to the repair.

Watch a video that shows in detail the entire windshield repair process:

If you want to get a high result of windshield repair, we recommend that you take this process seriously and scrupulously. Read also about how to fix cracks in the bumper.

When driving behind another car on the highway, it is easy to get hit by a small stone in the windshield, body or optics. First of all, these are chips and cracks on the windshield.In this article, we will analyze the main types of damage, find out which defects we can fix on our own, and which ones are better to contact a specialized service station.

The windshield can be safely called the most vulnerable point of the car. Various defects appear on its surface during operation. They can be divided into the following:

Scratch. This defect occurs upon contact with a sharp object, the hardness of which exceeds the strength of glass. The depth of the scratch does not allow a crack to form. Shallow scratches are caused by sand particles that fall on the car.
Round chip "bull's eye". This is the most common defect, the chip has the shape of a circle without cracking.
Crack. Such a defect is the most dangerous. In addition to worsening visibility, the crack tends to grow while driving.
Combined defects. They are complex in structure.

Next, we will consider in more detail how to remove some defects from the windshield with our own hands. Find out what consumables and special tools are needed.

Remember that imperfections in the windshield not only make your vehicle look worse, but can also cause an accident. Don't put off windshield repair!

The main reason for the appearance of small scratches on the glass is ordinary sand. It settles on glass, wiper rubber bands, seals and on a rag that you wipe your car with. Sand particles constantly scratch the surface. Therefore, visibility decreases over time. Polishing will help restore transparency to the windshield. Sanding is not recommended. Most likely, it will not be possible to carry out such processing independently.

For polishing the windshield, you can use folk remedies and professional materials. Before you start repairing scratches, wash your windshield thoroughly. Wipe it with a dry, clean cloth or a special glass cloth. Don't use newspaper.

GOI paste will help get rid of small defects on glass

To eliminate small scratches with improvised means, use toothpaste or GOI paste. The best effect is achieved when using GOI paste. A small portion of the paste is applied to a clean cotton swab or a piece of felt. Then rub in a circular motion on the problem area.

Windshield polishing helps eliminate small, superficial scratches

Reapply the paste and rub in circles in the opposite direction. To speed up the process, you can use a grinder with a felt nozzle.

Various types of polishes are available for polishing windshields in automotive supply stores. Before using pastes, we recommend doing a trial polishing on a small area of glass. The composition of polishes includes various kinds of reagents and it is not known how they will act on the glass surface.

Wash the glass thoroughly after polishing.

Removing deeper scratches is difficult. In this case, there are two options: you must come to terms with this state of affairs, or act drastically and replace the windshield.

After a slight blow to the windshield, a small chip remains on it. Such a defect most often occurs when driving on a freeway, where a higher speed is allowed. And even a small pebble from under the wheels of a car in front can cause damage. As soon as you find this kind of defect, try to quickly take measures to protect the chipped area from contamination. This will help the usual transparent adhesive tape. Stick it on the outside of the defect. Such protection will further facilitate the repair of the windshield and make it less noticeable.Do not delay with the repair. A chip, or as experts call it a "bull's eye", with a probability of 80% can cause a crack to form over the entire surface.To carry out high-quality windshield repair, it is necessary to prepare the following tools and materials:

injector for uniform supply of photopolymer to the cleavage site;

Image - Do-it-yourself car glass chip repair

A special bridge is placed above the center of the cleavage, on which an injector is attached to supply the adhesive-photopolymer

applicator or bridge for precise positioning of the injector over the chip;

small mirror;

photopolymer for glass surface repair;

The adhesive photopolymer is sensitive to ultraviolet light. It is better to work with him in the shade

protective film;

ultraviolet lamp to speed up the repair. If there is no lamp, then the photopolymer will harden in the sun, but it will take 24 hours for complete polymerization.

For self-repair of chips and cracks, special kits are produced:

pump for creating a vacuum;
injector or syringe for photopolymer;
blade;
glue.

If you want to get rid of chips and cracks with your own hands, then pay attention to the windshield repair kits from DoneDeal, HANDY-MAN.

Carry out repairs in the shade. The adhesive is UV sensitive.
Before starting the repair, clean the defect area with plenty of water and dry it with a stream of air.
Position the applicator or injector bridge exactly over the center of the defect. Check the accuracy of the installation from inside the car or using a small mirror.
Apply photopolymer adhesive to the chip using an injector.
Apply protective film. It will not allow the photopolymer to spread on the glass. We apply a protective film. It will not allow the glue to spread on the surface.
Illuminate the repair area with a UV lamp. The ultraviolet helps speed up the curing of the photopolymer. Usually 2 to 4 minutes is enough.
Carefully remove the protective film and adhesive residue with a sharp, thin blade.
Polish the repair area with felt.

Every driver needs to know that any crack in the windshield weakens the rigidity of the body. If such a car gets into an accident, the consequences will be much sadder than with a vehicle whose glass is intact.Cracks up to 10 centimeters can be repaired with your own hands. To fix the defect, you need a tool:

small drill with a thin diamond drill;

A small drill is a great help when fixing cracks in the windshield

Fine diamond drill is applied to glass drilling

adhesive photopolymer;

injector for glue-photopolymer;

flashlight;

UV lamp.

Rinse the crack thoroughly and dry well. Do not use detergents, they impair the adhesion of the adhesive.
Determine the size of the crack.
Relieve tension at the site of the defect. To do this, it is necessary to make through holes at the edges of the crack. This will stop the propagation process. Holes at the edge of the defect help relieve stress and stop the crack
Launch the photopolymer into the crack using the injector.
Illuminate the defect area with ultraviolet light for 2-5 minutes.
Polish glass.

If a complex defect has appeared on the windshield, for example, a chip with cracks radiating from it, then it is better to use the services of car glass repair specialists. Do not repair cracks larger than 20 cm and chips larger than 3 cm in diameter by yourself. Entrust such defects to the masters, because their elimination requires special equipment and certain skills.

The cost of windshield repair depends on the condition of the damage, the extent of the defect, and the materials used. But in any case, such repairs will cost less than replacing the windshield.

Chips and cracks can be repaired both from the outside and from the inside. The strength of the glass is restored completely, transparency - up to 90%. The eliminated defect is noticeable only at a certain angle. Repair will take from 30 minutes to 3-4 hours. An article and a video on the topic will help you correctly assess the forces and make the right decision. Happy repair!

What to do if there is a chip on the windshield? Try to repair the glass as soon as possible, because. due to vibrations and temperature changes, even a slight chip can turn into a large crack. You can remove a crack or chip on the windshield at a service station or using a special kit.

You can buy a special set at a price of 300 rubles. It should include: a syringe with a repair compound, an applicator for filling chips and rings with a sticky surface for installing the applicator on glass. Additionally you will need: a blade and a film for food products. With the help of the kit, you can repair a crack on the windshield up to 20 cm long.

The windshield must be clean, dry and cool (not exposed to sunlight).

Procedure:

Remove glass fragments from the chip (with a vacuum cleaner or a pin).
Remove the protective film from the ring from the set and stick the ring on the chip (the protrusion should be directed upwards).
Remove the protective film from the other side of the ring and install the appilator on the ring (the protrusions are aligned).
Insert the syringe into the appilator opening.
Pull the syringe plunger to the mark and turn it to fix it with a stopper (wait 30 seconds for air to escape from the chip).
Release the piston from the stopper (the piston will lower).
Gently press the piston until resistance appears.
The procedure for removing air (points 5-7) is repeated 3-4 times.

Release the plunger of the syringe and leave it in the down position for 15 minutes.
Check the filling of the cleavage with a repair compound (on the inside of the glass). If there are voids, repeat the air removal procedure (points 5-7).
Remove applicator and ring residue with a blade.
Cover the chip with cling film.
Put the car in the sun for 20 minutes to polymerize the composition (on a cloudy day for 1 hour).

The windshield must be clean, dry and cool (not exposed to sunlight).Procedure:

Firmly attach the syringe to the edge of the crack.

Squeeze out the repair compound by moving the syringe (from the end of the crack to the beginning) slowly and smoothly along the crack. In order for the repair compound to completely fill the crack, lightly press on the glass under the crack.

Cover the crack with cling film.

Put the car in the sun for 20 minutes to polymerize the composition (on a cloudy day for 1 hour).

To stop a crack on the windshield, you will need to drill glass, for this, seek help from specialists. If the number of cracks on the glass is large and they cannot be repaired, then the windshield should be replaced (instruction).

If the crack is in the line of sight of the driver, then such operation of the car will not be safe. By the way, do you know which washer nozzles do their job better?

Today we are going to talk about car windshield repair. The procedure is simple, already known to many, but requires compliance with a number of sequences, the violation of which can affect the final result or even make repairs meaningless and short-lived.

The question is relevant, since winter is just around the corner and soon our beloved public utilities will take to the roads to scatter pebbles and other reagents, which will immediately lead to an increase in the risk of getting one of these pebbles on glass, thereby earning a chip.

However, this is already clear, let's move from words to deeds.
What to do if at one such “beautiful” moment a stone nevertheless flew to you and left a chip behind?

For starters, don't get upset. The event, though unpleasant, but very fixable. Of course, it will not be possible to completely get rid of the chip trace, but it is quite realistic to avoid its further propagation in the form of cracks and reduce its visibility to a minimum.
To avoid the ingress of dirt, it is advisable not to delay the repair, but it is even better to seal the chip, for example, with adhesive tape. To prevent the adhesive from the adhesive tape from getting on the chip, you need to put a piece of paper in the center.

After the first urgent events, you can relax. Now the most important thing is to choose a car service in which you will repair this chip with high quality, in compliance with the technology. If there is no desire to experiment by example, then you can simply come to local repair center PDR-Masters, but if for some reason this cannot be done, then I will describe the entire repair process so that you can control this procedure, trying to minimize the consequences of poor-quality repairs.

So: the chip is sealed, the car is in the service - let's get started!

In order to discharge the tension of the glass in the places of cleavage, as well as to facilitate the penetration of polymers, it is necessary to drill.

With sufficient experience, this procedure is not particularly difficult, it will take literally 2-3 minutes.

This is how a processed, drilled chip of our glass looks like.

After that, we proceed directly to the most important repair procedure - filling the chip with polymer solutions. To do this, we install special equipment - injector.

Such a device will help us apply polymers under pressure, which will lead to the complete filling of the chip and save us from traces of cracks as much as possible. As you may have guessed, the next step is to fill the chip with resin:

When the required amount of polymer is in the injector, it is necessary to create pressure, after which the polymer will completely fill all the branches of the cleavage.

It looks like a filled chip from the side of the cabin.

We remove the injector and apply a sealing layer of polymer to the chip, after which we cover it with a plastic plate for uniform filling.

This completes the preparatory part of the repair.

Let's move on to the next step - polymer drying. Drying occurs only under the influence of ultraviolet light.
To do this, set the lamp over the place of damage and leave for 10-15 minutes.

Then we remove the remains of the polymer with a special blade and apply polishing paste.

If the instructions are followed correctly, then only an inconspicuous point will remain from the chip - the place of drilling.

The cost of the work was 700 rubles and 15 minutes of time, which is much cheaper than new glass.

That's all for me, do not delay the repair, as before, I will answer all your questions in the comments.
Good luck on the roads and less stones on the windows =)

Thank you Andrew for a job well done.
PDR-Masters: Solntsevo.

It seems that there is no need to explain the importance of maintaining the windshield of the car in good condition, through which the driver receives the maximum amount of information in the process of movement. Even the slightest scratches on the glass can distract attention, distort the image, and generally interfere with the driver's view, to say nothing of cracks and other more serious damage.

Replacing a car windshield is an expensive procedure that every driver tends to delay as much as possible, waiting for the “critical” moment, that is, broken glass. BUT if you take repair actions before the cracks themselves appear, you can save a lot and extend the “life” period of the car windshield.

There are two scenarios for crack formation: short-term and long-term.

In the first variant, cracks appear immediately after the physical contact of any object with glass. Simply put, a crack is formed when a stone, bottle or other solid object "flies" into the glass. In such a situation, it is necessary to change the entire glass.

A long-term option for the formation of cracks involves their direct "development" on the windshield of the car. Cracks appear from small chips that form on each glass. Such chips appear after sand, stones and other things get into the glass.

Since car glass is multi-layered (triplex), it can be repaired, and it is possible to eliminate the chip before it transforms into a crack.

The driver must carefully monitor the windshield of the car if he does not want to allow the formation of cracks on it. Chips are not always visible from the inside of the car, and therefore experts recommend regularly (at least once a month) checking the windshield for their presence.

Please note: Most of the chips on the windshield can still be seen from the inside of the car. They are especially noticeable at night, when artificial lighting is created around the car. At such moments, even minor chips glare strongly, refract light and create difficulties in viewing.

Do-it-yourself windshield repair is not the easiest procedure in car maintenance, and it is recommended to resort to it only if you are confident in your abilities and have all the necessary equipment. In other situations, it is often more profitable to contact a service center where specialists will remove chips from the windshield.

The first step is to decide what is required to repair the chips on the windshield. The list of tools and consumables is solid, but there is nothing exotic among them, and everything you need can be purchased at the nearest hardware and automotive stores.

The following tools will be required for self-repair:

Please note: Another tool that is good to get before starting work is an ultraviolet lamp. It allows you to speed up the process of solidification of the polymer.

It is recommended to carry out work on repairing chips on the windshield in a garage box. This is due to the fact that it is necessary to minimize the likelihood of dirt and moisture getting on the repaired fragment during operation. On the street, there is a possibility that sand, pollen, leaves, etc. will get into the polymer, and the possibility of rain is also possible.

Before starting work, it is necessary to prepare the place of the chip. If the chip is an inconvenient shape to repair, use a scriber to expand and level it. A mirror and a flashlight can help determine the boundaries of the chip. Next, the chip should be thoroughly cleaned, for this:

First, using wet wipes, remove glass, dust and dirt from the chip, as well as from the nearby area;
Next, wipe the place with dry wipes;
Use compresses or a pump to blow out the chipped area. You can also use a hair dryer to dry the defect, if required.

Important: Use for wiping should be wet wipes treated with alcohol, but without special detergents. Excess "chemistry" can settle on the surface of the defect, as a result of which the polymer "seizes" worse.

When the chip is prepared, go directly to the repair. Do the following:

Install the injector in place of the damage. Most often this is done using suction cups, but, depending on the model, the installation method may vary. Read the instructions for the device to install it correctly;
Pour the selected polymer into the syringe. Please note: If you purchased a two-component polymer, that is, it contains two tubes, read the instructions for it in order to mix it correctly and fill the syringe;
Next, pour the polymer through the nipple of the injector into the chip on the windshield of the car. Repeat the polymer injection operation two times in a row;
Leave the polymer to dry completely, which may take up to 24 hours. Please note that you can speed up this process if you use an ultraviolet lamp;
When the polymer is completely dry in the chip, it is necessary to remove its remaining excess;
The final step is polishing the repair site or the entire windshield.

On this, the process of repairing a chipped windshield can be considered complete.Please note that if you find a chip on your windshield, you need to start repairing it as soon as possible. When driving, significant pressure is exerted on the glass of the car, which can lead to the formation of a crack from the chip and the need to replace the entire windshield.

Hello dear readers of the my.housecope.com/wp-content/uploads/ext/2102 blog!

In this article, we will look at how to repair a chipped windshield.

Minor damage to the windshield can develop into a crack at any time. It usually happens when you least expect it. When the glass cracks, it will be more difficult, expensive, and sometimes impossible to return it to its previous appearance. A chipped windshield needs to be repaired. Before repairing the damage, it is advisable to close it immediately with adhesive tape. This will prevent dirt and moisture from getting inside the chip.

Windshields consist of several layers. Two thin glasses are glued together with a polymer layer. The outer parts of the glass are hardened. The polymer center layer is elastic and acts as a damper, reducing the possibility of glass damage from small stones flying from the road. If, nevertheless, the stone damages the glass, then the outer glass is damaged.

Chips and cracks are two of the most common windshield damage. Some damages are more complex and have a configuration of several types of damages. There are ROLAGS standards (Repair of Laminated Automotive Glass Standard - Automotive Windshield Repair Standard), which define the shape (by which the names described below are given) and maintainability, depending on the size of the damage.

Star damage. It has a central damage, from which several cracks extend. It usually has an X-shaped appearance. Such damage is repairable if it does not exceed 6–7 cm in diameter. Teschinki extending from the center of damage require drilling to stop their spread.

Bull's eye damage has a primary chip surrounded by a secondary non-cracked fracture. Such damage is considered suitable for repair if its size does not exceed 2.5 cm.

A Crescent lesion is defined as a partial, incomplete bull's eye. In English it is called Half moon (half moon, crescent). To be repaired if it does not exceed 2.5 centimeters.

Combined damage is defined as damage with multiple characteristics. That is, it has the characteristics of "Star", "Bull's Eye" damage, as well as cracks of various sizes coming from the epicenter of the damage. Such combined damage is considered repairable if its diameter (excluding cracks) does not exceed 4–5 cm.

The windshield consists of several layers. The layers are interconnected by a polymer. If the middle layer of glass is damaged or the glass is damaged through and through, then the glass cannot be repaired and must be replaced.

Damage with recesses and a missing part of the glass are repairable if the diameter of the recess does not exceed 3 mm.

Long cracks cannot be repaired (at least not cost-effectively). Therefore, it is important to have time to repair the chip before it develops into a crack.

All types of windshield damage are repaired in the same way. The damaged area is cleaned and dried. Next, the air is pumped out of the damage and the polymer is injected under pressure.The polymer that is injected into the damage cavity is transparent and has the same refractive index as glass. Thus, after a properly carried out repair, the damage becomes almost invisible from any angle.

The area to be repaired is then illuminated with ultraviolet light for 5 minutes to activate the polymer. The next step is to cut off the polymer residues from the glass surface and polish the repaired segment.

It is necessary that the glass be clean and dry before repair. Do not use detergents or glass cleaners before repairing the windshield. It is better to use the cleaner and degreaser that come with the repair kit. If the glass is damp, you can use a hair dryer to dry it. When repairing, it should be approximately room temperature.

There are different types of repair kits. Most inexpensive repair kits are simplified versions of professional chip repair equipment. The procedure for repair using different kits may vary, but the main principle is the same.

Professional kits are designed for use in specialized workshops. Their cost is from 500 US dollars and above. They are sold in convenient cases, which contain all the necessary tools and consumables for repairing damaged windshields. Such sets include:

injector holder (bridge)
mirror for installation on the back of the glass. It helps to control the installation of repair fixtures and the repair process.
portable cordless drill. It is used to drill the ends of cracks to stop their propagation.
UV lamp. Used to quickly activate the polymer after injection.
A set of polymers for injection into the damage cavity.
Degreasing wipes, adhesive tapes, glass polishes, etc.

Professional kits allow you to repair any repairable damage, including some types of cracks.

Some professional kits may include several identical tools to repair several chips at the same time.

As mentioned above, most inexpensive windshield chip repair kits are simplified versions of professional kits. They are much cheaper and do not contain some of the tools and fixtures that are in professional kits. Next, we will look at repairing a chipped windshield using an inexpensive 3M repair kit.

To repair a chipped windshield yourself, you can purchase a relatively inexpensive chip repair kit. In our example, not the cheapest, but not the most expensive non-professional kit is given.

3M offers a special kit designed to repair small chips, "stars" and cracks in automotive glass. Some small chips can be repaired so that they are almost invisible. Larger lesions can be stopped from spreading further and made less noticeable.

This set can be used in your own garage. No special conditions are needed for this.

So, let's look at the repair process using the example of a small chip step by step:

To begin the process of repairing a chipped windshield, you need to remove any remaining pieces of glass. In the kit for this there is a special rod. You can also use a blade.

Care must be taken to clean the damage itself and the surface of the glass around the chip to ensure good adhesion for the suction cups of the device included in the kit. It is important to check that no particles and dirt remain in the recesses and cracks of the damage.

Next, you need to assemble the fixture and install it on the glass so that its central part is above the center of damage. The adapter must be positioned perpendicular to the surface.

You need to check the location of the “bridge” from the inside again before moving on to the next step. Note that a paper towel has been placed near the center of the device to prevent the resin from flowing onto the glass.

The next step is to use the special injector included in the kit to fill the chamber with a special polymer.

Screw the injector into the cavity. It is necessary to inject the polymer into the damage cavity and pump it out again to remove air bubbles. Next, the polymer again needs to be injected with pressure.

Next, you need the whole structure to stand for 30 minutes, preferably under the sun, after which you can dismantle the device.

Next, the leaked polymer residues are removed. And the repair area is wiped with a cleaner.

In the photo you can see that the chip has become invisible.

No need to repair the windshield in the sun. The sun's rays will accelerate the curing of the polymer before it spreads, which will degrade the quality of the repair. After injection and spreading into the polymer cleavage cavity, you need to apply an ultraviolet lamp or leave the repair area under the sun.

Some kits contain an adhesive film and require it to be applied to the area to be repaired some time after the resin has been injected. With some types of damage, it helps to keep the polymer from flowing out at the initial stage of hardening.

Small cracks must be stopped from further spread by drilling a small non-through hole at the end of it.

The trouble happened: a pebble flying out from under the wheels or a spike from the tread of a passing car hit the windshield of your car. But, there is no reason to despair yet. Stop for a second and assess the situation.

Glass chip. And this has its own plus. A chip is not a crack. Repairing a chipped windshield is less of a problem than repairing a cracked windshield.

What for? At least in order to take preventive measures that will help you cope with the windshield chip repair procedure in the future. Do not be lazy, seal the chipped area with transparent tape - this will then reduce the process of cleaning the defect from dirt.

Why so much attention to the chip on the glass? Elementarily simple. Timely repair of windshield chips allows you to stop the process of turning a chip into a crack, and avoid a more costly procedure - repairing cracks on the windshield of your car. Choose, you are a practical and sane person.

Repair of chips on the windshield does not require special professionalism and deep knowledge of the device of the internal combustion engine. All you need is your desire, a “field” ambulance kit for glass in the form, for example, of an Abro windshield chip repair kit, and time.

Why Abro? Not necessary. The set can be of any manufacturer that you choose in the auto shop. The main thing is that it is completed and the expiration date corresponds.Otherwise, the polymer applied to the chip will either not “take” or will have a low transparency coefficient, and even glass polishing will not help you.

The cost of a windshield chip repair kit is several times less than the amount you hear in the service. And the choice, of course, is yours. But there may be several chips during the season, then it is probably easier to change the car right away. Windshield chip repair is within your power. Do not doubt. Image - Do-it-yourself car glass chip repair

Repair of chips on the windshield is preferably done in the garage and in appropriate sunny weather. Although this is not an axiom. There is no weather - there is a wife's hair dryer or a neighbor's building hair dryer. There is always a way out.

Assessment of the degree of defect. Using a flashlight, evaluate the area of the chip, and maybe microcracks have already gone from it, which are invisible to the naked eye. If yes, then the edges of the cracks must be drilled to prevent crack propagation. For this you need: an electric drill and a diamond drill.

Preparing a chip for repair. If there are no cracks, then we will continue to repair the windshield chip using a kit. Thoroughly clean the defect area: remove, rinse dust, dirt, glass micro-fragments from the cleavage cavity. Dry the area thoroughly with a hair dryer. It is not recommended to wash the repair site with chemicals - a film is formed that will prevent the polymer from doing its job. Just water and a brush or needle from the kit. Degrease the chipped area with alcohol.

Installing the Mini Injector. The repair kit has a self-adhesive "circle" and a plastic "nipple" for the syringe. This is an impromptu one-time injector. We install it according to the instructions.

Resin preparation. We fill the syringe from the set from two containers (if the polymer is one-component, then it is even easier, no need to mix).

polymerization process. We install the syringe in the "nipple" and make several pumps: vacuum - 4-6 minutes, excess pressure - 8-10 minutes, vacuum again. How these procedures are carried out by the manufacturer of the chip repair kit is described in detail in the instructions.

In the kit there is a special metal bracket for fixing the syringe to the "nipple" of the injector. After creating pressure in the syringe, the design is left for the time specified in the instructions. Typically 4-6 hours.

The final stage – cleaning the repair site from excess polymer. We remove the injector and use a blade or a construction knife to remove excess glue. But, finally, the polymer will harden within 8-10 hours.

Everything. The windshield chip has been repaired, it is possible to polish the repair site or, once you have taken it, the entire windshield. The goal is achieved, the chip is eliminated, the risk of a crack on the windshield is minimized. Let's hit the road. Let as little as possible you have to repair chips on the windshield.