Do-it-yourself shower drain repair

In detail: do-it-yourself shower drain repair from a real master for the site my.housecope.com.

Beautiful plastic booths quickly filled the world market and quietly moved into the apartments of the townspeople and the houses of the rural residents. They are loved for their practicality and functionality.

Over time, some elements of the boxes fail, others wear out, but skilled owners repair the shower cabin and restore or replace parts on their own.

Economical shower cabins with a minimum of functions or expensive hydromassage boxes are designed for daily hygiene - taking a shower.

Some of them can be used as a bath. These are complex devices, consisting of many parts. There are a lot of modifications of the boxes: from open, resembling an ordinary shower with protective partitions, to closed, sealed and stuffed with electronics.

Both simple hand-assembled models and complex factory modifications break down, while some of the problems are common. For example, any of the presented cabins may crack the protective screen or fail the mixer.

List of breakdowns that users of shower boxes most often encounter:

wear of the ladder or water seal installed under the bottom;
deformation of the pallet or the appearance of cracks on its surface;
mechanical damage to doors or protective screens;
breakage of door rollers or hinges responsible for opening;
failure of shower equipment - watering can, hose, mixer.

For complex electronically controlled models, electrical parts may fail or software may fail.

Only specialists are able to deal with electronics on their own, it is better to replace broken glass or a deformed pallet, however, minor breakdowns can be eliminated on their own.

Video (click to play).

For example, repairing rollers, restoring a pallet, cleaning a plumbing filter or cleaning scratches on a plastic screen is something even an amateur can do.

Professional repairs are another waste of the household budget, and sometimes urgent restoration of parts is required. Therefore, we will find out how to fix a broken shower cabin on our own, without the involvement of qualified craftsmen. Consider only those situations in which special skills are not needed.

The structure of the built-in shower faucet differs from the traditional type, installed on the sink or above the bath.

It consists of a control unit - two handles and working communications - a system of thin tubes. The first ceramic cartridge with holes is responsible for switching hot / cold water, the second regulates the flow of water in the right direction.

It is possible to understand that the cartridge is faulty or the housing element is cracked by the leakage that has appeared. Water starts to leak either when the tap is turned on, or constantly. In the first case, the wear of the seal is likely, in the second - a crack on the cartridge.

The opposite is also possible - water does not enter the shower well. This is due to blockage: over time, the holes become clogged with lime or corrosive deposits.

To deal with the problem, it is necessary to dismantle the entire mixer unit. To work, you will need a set of screwdrivers, pliers with narrow paws. Purpose: to disassemble the mixer, find the cause of the leak, repair or replace the part, install the unit in place.

Gluing cracks is a temporary solution to the problem. In order for the mixer to continue to perform all available functions, it is necessary to replace the cartridge with a new one.

However, preventive cleaning of metal and plastic parts does not hurt. To reduce lime scale, we recommend using filters both special for shower cabins and general filters installed on water supply pipes.

Cast iron and even steel pallets are not used in shower cabins. New models are made of acrylic - durable, "warm", lightweight material.

But the acrylic bottom has a huge disadvantage - frequent breakdowns due to the heavy weight of the person taking a shower, or due to mechanical damage. In both cases, cracks form through which water flows out.

If water began to flow from under the base of the cabin, the bottom was significantly deformed or cracks became visible - this is a signal for urgent repairs.

A small abrasion can be restored without removing the pallet from its place, but for a thorough repair it is necessary to disassemble the booth and dismantle the base.

spatula, chisel, stationery knife, sandpaper - to remove the acrylic layer;
a drill with nozzles and an engraver - for cleaning the base and cracks;
brushes for applying glue and acrylic filling.

To completely renew the pallet, you first need to remove the old acrylic layer, clean all surfaces, make a patch of fiberglass on the outside and acrylic filling on the inside.

In order for a fiberglass patch to serve for a long time, you need to choose a quality adhesive. An example of a reliable composition is a two-component EDP adhesive. It does not react to water and retains the quality of bonding for many years.

The advantage of the imported analogue Plexus MA 420 is its excellent adhesion even with an unpolished surface. But the alternative costs more than 2 thousand rubles, while the domestic EAF costs 140-160 rubles.

If you have a choice before replacing and repairing, you can safely experiment with restoration with your own hands. It won’t work - you can always buy a replacement, but if everything works out, you will get an almost new pallet and useful skills.

Small, inconspicuous rollers are hidden under decorative trims at the bottom of glass or plastic doors.

They are tightly covered, however, water penetrates through the cracks even into the bearings. As a result, the internal metal elements of the rollers become rusty and clogged with dirt - a sediment of tap water that is not ideal in composition.

You will notice the need for cleaning or replacement when the door begins to open with effort, strange sounds appear during movement and partial blockage.

The problem is solved simply: you will need an anti-rust solution, kerosene, grease, a screwdriver and pliers.

The final touch is the installation of a decorative overlay. We check the quality of work by opening and closing the booth door. After cleaning, it should move freely, without squeaking and delays.

The sooner you notice the problem and clean the rollers, the easier the procedure will be. In advanced cases, the balls inside the body are tightly “welded”, it becomes extremely difficult to restore their work.

In some situations, it is easier to buy new parts, but it is not always possible to find the right size.

We do not recommend repairing cabin electronics. If the equipment has ceased to execute commands correctly, you need to call the wizard. Warranty repairs are free of charge, so be sure to keep receipts and documents.

For post-warranty service, you can contact a company specializing in the repair of plumbing.

To replace the glass, pallet or complete disassembly / assembly of the booth, you can also contact the master. If you do not have the experience of such work and free time, then you can save more than one day by spending a small amount.

Before starting repairs, it is useful to familiarize yourself with the prices of parts.It also happens that replacing a shower tray or shower unit costs a little more than restoration work, so it makes sense not to waste time and just install new structural elements.

Videos shot by craftsmen and amateurs contain many useful tips and recommendations for repair work.

How to repair a sump or prevent a leak:

How to avoid buying a new door roller:

Assembly instructions - useful for replacing parts:

The pipes are hidden in the space under the pallet

Note! In the case of installing ultra-low pallets, you need to pay attention to the throughput of the siphon, and there may be more problems with clogging than in the case of conventional pallets.

if the pallet is not used, then shower drains and channels are used to drain the water - the scope of work in this case is somewhat different.

The tile ladder is a simple device with a water seal, the main part of which is hidden directly in the screed. Due to this, the shower floor does not rise above the bathroom floor, which is especially convenient if there are people in the family who find it difficult to step over the high edge of the shower tray.

The main difference between a ladder and a channel is the shape. The channel is narrow and elongated, and the ladder has a square or round drain grate. If we compare the laboriousness of a do-it-yourself shower drain device with and without a pallet, then, of course, it is much easier to connect a shower with a pallet to the sewer - just install the pallet itself on a stand and close the gap with decorative overlays.

Drainage using a ladder

The drain for the shower tray should be selected both taking into account the flow of water, and taking into account ease of use. On average, for a shower, a normal flow rate can be considered approximately 50 l / min, this allows you to take a shower without flow restrictions.

It will also be useful to understand the design of the drain, in particular, attention should be paid to which shutter is used.

Such devices, without exception, are all produced with a shutter, but here's a way to prevent odors from entering the sewer into the shower can vary greatly depending on the model:

a water seal is the simplest option, in this case, a water plug in the siphon becomes an obstacle to the entry of air from the sewer into the room, and an S-shaped bend is attached to the pipe to form it. A bottle water seal can also be distinguished, but it is more often used in kitchens, where it is important to be able to remove the bottom cover at any time and clean it;

dry shutter, a shower stall drain device using this design makes sense when the shower is used infrequently and there is a risk that the water plug will simply dry out;

Note! If the "warm floor" system is used, then the water seal cannot be recommended for installation. The fact is that the water jumper will constantly evaporate.

Recently, devices with a plug on the drain hole, which can tightly block the pipe, are gaining popularity, often such designs are called “click-clack”.

In order for the drain to open, just press the button

The price of a drain with a plug is small and fluctuates around 1000 rubles (although you can find a simpler option). In order to close the drain, simply press the button with your foot once, to open the drain, you will need to press it again. In such devices, the plug acts as a barrier to the smell from the sewer into the room.

Also, even before installing the drain, you need to think about the need for an overflow device. This may simply be necessary if a shower stall with a high tray is planned. Water can be drawn into the pan and the overflow will be used as insurance against overfilling it and splashing water on the floor.

Overflow does not greatly complicate the design of the drain. Outwardly, it looks like an additional hole closer to the upper side of the pallet, through which excess water will be sent to the sewer. This is useful if the person left the pallet to fill and forgot about it.

In principle, installing a pallet and connecting it to the sewer is not particularly difficult. It is necessary to solve 2 tasks - to ensure the horizontality of the pallet itself and compliance with the minimum gaps and slopes when it is connected to the sewer.

Installation of a shower cabin drain begins with its fitting and marking on the floor of the design position.

In the future, it is recommended to adhere to the following procedure:

the siphon will be connected to the sewerage using a sewer corrugation (although ordinary plastic pipes can also be used), therefore, knowing the approximate location of the drain hole, you can estimate how long the corrugation will be needed;
for ease of assembly, a frame made of a metal profile is assembled at the bottom of the pallet from the wrong side;

The pallet will rest on the frame

Note! The height of the drain for the shower cabin should be such that after installing the siphon, the distance from it to the floor is at least 5-7 cm. This is necessary to create the required slope and unhindered flow of water into the sewer.

to the sewer you need to connect the corrugation and siphon. A plastic union nut is used to connect the siphon and the corrugation; in addition, the joint can be smeared with sealant for greater reliability;
then the pan is turned over on its side, a metal mesh is inserted into the drain hole (it retains large debris), a ring;

Everything you need to connect

the siphon is connected from the inside - first, a sealant is applied to the part that will be in contact with the pallet, then a rubber ring is applied to it, and only after that it is connected to the part installed on the front side of the pallet.

Note! If an overflow drain is used for a shower cabin, then the main difference is that 2 pipes are connected to the siphon - one from the drain hole, the other from the overflow.

After that, the pallet is turned over and installed in place. The legs are usually made with height adjustment, so that you can easily achieve the levelness of the shower tray. The skew is checked by the usual building level.

Connected correctly

The installation instructions allow for additional strengthening of the structure.If the factory frame is not rigid enough and the bottom still bends strongly, then a simple brick can be laid on the base or an elevation made of cement-sand mortar so that the pallet rests on it.

No matter how carefully the installation is carried out, it is still often necessary to repair the shower drain. The reason for this is simple - blockage and the impossibility of draining water, hence the stagnation of water in the pan, and an unpleasant smell in the booth.

Anyone can face such a picture.

The main problems that people face are bad smell and drainage problems, all of which are the result of the same problem. As for the repair, or rather cleaning the pipes, it can be done in several ways, and in the question of how to clean the drain at the shower cabin, a lot depends on the way the pallet is connected to the sewer.

If not corrugation was used, but ordinary plastic pipes, then cleaning options such as:

mechanical - an ordinary plunger or a plumbing cable can cope with a blockage of almost any complexity;

Clog Cleaning Tool Set

various cleaning products can also deal with clogs. If you want to know how to clean a shower drain with them, beware of too aggressive substances that can simply corrode the plastic. It is better to give preference to gel products, rather than powders;
you can try folk remedies, for example, a mixture of soda, vinegar and salt does a good job with weak blockages, you just need to leave it in the pipe for a couple of hours.

Ingredients for folk cleanser

In order to eliminate the smell in the shower, the drain must work perfectly. But in the case of connecting a drain through a corrugation, it can be difficult to cope with a blockage, the cable will simply break the pipe, the plunger is also unsafe, and aggressive gels can simply burn through the wall of the corrugation. Sometimes it comes to the point that it's easier to just disconnect the siphon and clean it separately.

Installing a shower stall in the house is a simple task. Particular attention should be paid to connecting the pallet to the sewer, the communications will be hidden, so it’s better to do everything right right away than to correct minor flaws later. The proposed material will allow you to properly connect the pallet to the sewer.The video in this article shows the collection of a shower cabin with its connection to the sewer. Image - Do-it-yourself shower drain repair

Everyone understands perfectly well that nothing lasts forever. In everyday life, there are also various breakdowns and defects. Today we will tell you about the most common malfunctions of shower stalls and how to deal with them.

If you did not make any mistakes when installing the shower cabin, then you can be sure that your hygiene corner will not bring you any problems for many years. However, if you have not learned any of the nuances, then you can get ready to repair the booth. Most often, the problematic part of the shower stall is the control panel, which is responsible for the timely operation of the shower button panel. One mistake during installation and the buttons will not work.

Other breakdowns are mechanical in nature. These include:

cracks in the pallet;
defect of the rollers responsible for opening and closing the cabin doors;
poor quality faucets and hoses.

As soon as you notice the appearance of some kind of defect, you should immediately start repairing, because if one malfunction is not stopped in time, it will “bring” a second, third, and so on.

In most cases, pallets are made of acrylic. Of course, it will be easiest to simply replace the old pallet with a new one, but not everyone has the opportunity to do this due to various circumstances. You can solve this problem yourself. If you have a crack on the pallet, then you can cover it up yourself. In this case, you will only have to spend money on acrylic and hardener and renew the coating, which will last you for many years.

If you decide to deal with the problem on your own, then the entire amount of work should be divided into stages:

The pallet should be separated from the rest of the structure and checked for other damage.
Have you checked? Now thoroughly wash the pan and dry it.
Next, you need to expand the crack. The crack is embroidered with a drill and a special nozzle. Please note that the depth should be no more than 2 mm.
In the same way, the edges of the crack itself should be embroidered. Due to this, the crack will not grow.
The next step is to degrease the surface of the crack. To do this, you will have to find a solvent specifically designed for alcohol-based acrylic surfaces.

We proceed to mixing the solution. In the correct proportions, which are indicated in the instructions for the use of acrylic and hardener, we mix these components.
The resulting mixture first treats the crack. It should be applied so that a small tubercle remains on top of the place where the crack was. After the solution hardens, this tubercle is combed off with ordinary emery.
If the hole turned out to be through, then in this case you will have to seal the crack with fiberglass and epoxy. Remember that you should start the process of closing the hole from the outside.
When everything is ready, it remains only to dry the pallet. Where you will do this is entirely up to you. Just do not forget that drying should be carried out in a well-ventilated place, a balcony will do just fine.

The drain system that allows water to escape from the shower stall can also be repaired. There is only one problem here - blockages. When they are not strong, that is, the water drains, but it can be seen that slowly, an ordinary plunger or some kind of chemical agent for cleaning blockages is enough for you. They will help you deal with this little problem.

But, if the blockage is serious, then the above remedies will not help you, but, on the contrary, may worsen the situation. Often, to solve the problem, you have to disassemble the so-called "sump" and rinse it. However, if the blockage is very bad, then you may have to disassemble the entire drain system that is located under your bathtub and thoroughly rinse and clean it. Experts note that sometimes the reason for the slow draining of water is far from blockages, but the wrong location of the pipes, because when they are tilted at an insufficient angle, the water drains more slowly.

In showers, the faucet is the most fragile place and most often breaks. We will tell you in which cases you can independently repair one or another part of the mixer, and when you have to make a complete replacement of this design.

You can repair in the following cases:

Gasket wear. Basically, problems with the mixer begin due to the most common gaskets. No matter what they are made of, faucet gaskets wear out very quickly, the reason for this can be water quality, mechanical stress or poor material quality. Anyone can make a replacement.
Cartridge failure. If there is a problem with the cartridge, you will be able to understand if the water does not mix well and does not completely overlap. There is nothing wrong with the breakdown of this part, it is relatively inexpensive, and it is very easy to replace it. It will not be difficult for you to replace the cartridge yourself.
The mixer leaks at the joints. There can be only two reasons for the defect: loosening in the fasteners or wear of the seal. In the first case, it will be enough for you to tighten the mounting bolts to understand if this is the problem. If the mixer has not stopped leaking, then you should grease the seals.

Before you start repairing a shower cabin, you should determine the very cause of the breakdown. Many of us, once taking a shower in a shower cabin, appreciated all its charms. That is why shower cabins are being installed so rapidly in their houses and apartments by their owners, and the demand for ready-made shower cabins has grown significantly in recent years. This is not smart. Freshen up in the morning after sleep under a jet of not a hot shower is so nice. Even better - quickly wash off the dust and noise of a bustling city after work in the summer. And you do not need to take a bath, waste time and extra cubic meters of water. And when the shower cabin we love so much breaks down, we start to panic, and are lost in ignorance of where to start repairing. Do not panic. We'll figure out.

Oddly enough, it sounds, but repairing shower stalls can be avoided if you properly care for them and use them carefully. In addition, you need to think about repairs even before you install your shower cabin in your home. Choose high-quality materials for its installation if you make a shower with your own hands, and purchase only a high-quality device if you install a ready-made one from the manufacturer.

Repair of shower cabins can be emergency and planned. The more often you conduct scheduled inspections of the shower cabin, the less it will be subject to sudden breakdowns.

Emergency repair of the shower box can be avoided if the product is inspected and tested during

Try to inspect the appearance of the cabin from time to time, wipe clogged places, sort out the mixer and clean the watering can. In addition, if you have an acrylic or plastic pallet, then it is better to immediately strengthen it and plant it on the base.

What can break in the shower:

Flexible hose. It can crack at the attachment points, or even just along the body.
Drain. It may become clogged or leak.
Mixer. The cartridge may fail, or the gaskets may wear out.
The watering can or aerator may become clogged.
The roller system or hinges can also fail.
The pallet, if any, may crack or break.
Possible depressurization of the walls.

Polycarbonate shower enclosures may develop cracks in the door or outer panel.

Many of us, if not all of us, are familiar with the situation when the water in the bath or shower does not drain, and you are standing in a foamy, not pleasant liquid. This is not a drain. Such malfunctions are not uncommon. They have two repair options.

The drain in the shower cabin can become clogged, which happens more often, or it can break, which, fortunately, happens much less often.

Repairing a drain that is clogged is not difficult to make.

In order to eliminate a serious blockage in the shower, it is better to call a plumber

How to clear a clogged drain siphon:

Try to get by with small sacrifices and clean the mesh with any thin object. It is often clogged with hair and soap suds, which can be easily removed.
Use a plunger. Contrary to the opinion of skeptics, he does an excellent job of his job;
If this does not help, pour a special product from a set of household chemicals sold in the store into the drain.

If the mole or "Mr. Cleaner" did not give any results, then proceed to drastic measures - remove the pan and disassemble the siphon.

If the drain is just clogged - this, as they say, is not so bad. Much worse is the situation when, when taking a shower, we realize that a puddle is spreading from under the pallet around the room. And it's good if your apartment is not on the ninth or fourteenth floor. What to do in this case?

It is necessary to change the drain in the shower cabin, as well as in the bathroom, as soon as you find a leak. The faster you do this, the less harm you will do to your neighbors.

There are not many drain replacement options. If you determine the location of the leak, you can only change the component of the drain design.

If the drain leak in the shower cabin is not installed, then you will have to change the entire set

How to replace a shower tray drain:

Shut off the water supply to the mixer;
Removed the old siphon;
Install a new drain structure.

The situation is much worse with handmade pallets or in showers where there are no pallets at all.

The most minor damage to the shower cabin is the failure of the shower hose. Eliminating it is not very difficult.

Broken shower hose? No problem. The worst thing that can happen in this situation is that you will not be able to take a shower until it is fixed.

Sometimes it takes no more than ten minutes to eliminate this trouble. In some cases, you have to go to the store for a new hose. The type of repair depends on the material your shower hose is made of. This is usually a flexible rubber hose with or without a metal braid.

If the leak is not at the end of the shower hose, but in the middle, then it is better to completely change the hose to a new one.

How to fix a broken shower hose:

Finding a leak. This usually happens at the exit of the mixer, or at the entrance to the watering can.
Turn off the water in the mixer.
We unscrew the hose from the mixer or watering can.
We move aside the metal braid and nut.
Cut the flexible hose with a sharp knife or scissors.
We release the fitting from the cut rubber.
Insert the fitting into the remaining section of the hose.
We put the gasket in place and fasten the hose to the product.

Modern shower cabins are far from the ones that my grandmother had in a garden plot, or in the courtyard of a country house. In some homes, the showering area is more like a spa, where dreams come true with a wave of a magic wand. And this wand is a remote control.

The control panel of a shower cabin equipped with many functions is a device that ensures its vital activity. The failure of this device completely blocks the operation of some models.

A major repair of the shower remote control requires the master to have special knowledge and skills

In some cases, it is even difficult to determine what exactly is out of order: the electronics control panel, or the cabin's electrical system itself. If you are not an electrician, then it is better not to risk the health of your family members and call a specialist.

What you can try to do yourself:

Replace the battery in the remote control;
Disassemble the remote control and clean the device inside;
Clear button.

If you do not know how to fix the remote control, it is better to take the device to the workshop. If the problem is in the remote, then let them just fix it for you, or replace it with a new one. If your remote control is in order, then urgently call a qualified technician to repair the electrical part of your shower stall.

Timely preventive measures have never harmed anyone. To ensure that the failure of the shower stall does not catch you headless and naked in the morning before work, carry out a preventive inspection of its details in a timely manner. Try to treat your shower stall with love, take care of it and take care of it, and it will thank you with gentle care for you and your health.Even the most expensive and high-quality plumbing can break down over time, not to mention budget options, but this is not a reason to panic, especially when it comes to a shower stall. Its design really has weak points that are vulnerable during operation, so it is advisable to perform simple steps to strengthen it even at the installation and connection stage. But what if the problem has already arisen? The first thing that comes to mind is replacing the old booth with a new one. It is easier to do this, but more expensive, besides, sometimes completely new products break. It is much cheaper to repair the structure yourself, for which you first need to deal with the cause of the breakdown.There are not so many reasons: either incorrect assembly and connection, or too large loads on structural elements. The reasons also include the use of low-quality products, for example, mixers, which often fail.The main and most “large-scale” breakdowns include:

broken glass;

cracked pallet;

leakage of connections of individual structural elements;

leakage in water supply or sewerage systems.

There are other malfunctions: breakage of wheels, handles, etc., but they are small and easy to deal with without outside help. Do-it-yourself repair of shower cabins is within the power of everyone, because even serious breakdowns are repaired quite simply, which is easy to see by reading this article.Repair depends on the type of breakdown, as well as on the causes of its occurrence. It is not enough just to fix or replace a damaged part, you also need to eliminate the root cause of the malfunction, otherwise repairs will have to be done regularly. Let us consider in more detail possible breakdowns, the causes of their occurrence and ways to deal with them.Broken glass is a common problem for those using regular, non-tempered glass. Replacing them with new ones will not be a problem, especially if the instructions for assembling the booth have been preserved, or if it was originally assembled without the help of specialists. At the same time, you need to pay attention that only the front compartments and sliding doors can be locally replaced, while replacing the rear panel will require dismantling the top of the structure, and this is a more responsible and difficult task.Cabin windows can be equipped with or without aluminum edging, but at the same time, all of them are fixed in the frame with rubber seals, which are responsible for the tightness and reliability of the connection. To replace the glass sheet, one or more racks are dismantled, the seal is removed, and fragments are removed. To install a new glass, you need to do the same steps in reverse order.Transparent impact-resistant films are often used to strengthen glass surfaces and increase their strength. They glue the entire surface, after which the canvases are not afraid of even strong blows, and in terms of characteristics they are close to hardened ones. Given the cost of glass, it is much cheaper to purchase a film once than to periodically change certain cracked walls of the booth. In addition, fragments can cause damage to health, so using glass "in its pure form" is also unsafe. Thus, do-it-yourself repair of a shower cabin in case of cracked or broken glass consists in replacing it.A cracked pallet made of acrylic is a common phenomenon, and the point here is not even the quality of the product, but the features of its design and correct installation. The acrylic pallet is not reinforced in the center, where it takes the maximum load, as a result of which its surface gradually sags. Sometimes cracks appear when used carelessly or when exposed to mechanical shocks, but these are special cases. Do-it-yourself repair of an acrylic shower tray is carried out using liquid acrylic, which is poured into cracks, provided that their length does not exceed 35 cm. If there are holes on the surface, their dimensions should be within 100x100 mm. The repair material - liquid acrylic - is sold as a repair kit - a kit that includes all the necessary components. It consists of liquid acrylic itself, as well as a special hardener and abrasive skins for grouting the seam.

Sealing cracks in the shower tray is carried out according to the following technology:

the crack is slightly expanded with the help of a grinder so that chamfers are obtained along the edges, forming a “bowl” for pouring;

the surface of the edges is cleaned of dust and debris, treated with alcohol;

liquid acrylic is mixed with a hardener in accordance with the instructions;

the crack is filled with the finished mixture, its excess is removed with a rubber spatula;

the place of filling is sealed with adhesive tape;

after complete drying, the time of which is indicated in the repair kit instructions, the adhesive tape is removed, and the surface is polished with abrasive skins.

The technology is really very simple, but its effectiveness will be reduced to zero if measures are not taken to strengthen the structure of the pallet. Otherwise, new cracks will not keep you waiting. To strengthen the pallet, you will need bricks and polyurethane foam. The sequence is as follows:

the front screen is dismantled;

a “pillow” of bricks is laid out under the pallet, which are simply stacked on top of each other without the use of mortar;

the distance between the bricks and the bottom is filled with Macroflex 65 mounting foam or another, which has a low expansion coefficient.

This simple procedure will allow you to get a reliable “foundation” for the pallet and prevent it from sinking in the center, where cracks usually appear.Repair of a bathroom with a shower cabin, photo examples of which can be viewed on our website, often involves the replacement of plumbing. Also, in some cases, the shower tray is already so broken that it makes no sense to repair it - it's easier to just throw it away and install a new one in its place.In any case, you can do it yourself, considering the following recommendations:

the pallet must be level. Its horizontal position will ensure an effective flow of water into the sewer hole from the entire surface. If the horizontal position is broken, puddles will remain in the corners;

the pallet should be placed so that free access to the sewerage system is provided for periodic cleaning of pipes. For this, a mounting clearance is provided.

This is just the case when you can’t do without dismantling the shower cabin, otherwise the result of the repair will be temporary, and after a week the traces of smudges will again make themselves felt. The first and main cause of leaks is improper assembly of the structure, leakage of its connections.The essence of the repair is the disassembly and reassembly of the shower cabin in compliance with the basic rules:

the pallet should fit as tightly as possible to the wall, which ensures its rigid fixation. To do this, hooks are attached to it from below, which press it against the walls. After their installation, the pallet is slightly moved away from the walls, silicone is pumped into the resulting gap, and then the pallet is pressed tightly against the walls with the help of hooks. At the same stage, it is filled with water, which allows you to control its tightness. The final touch is the installation of decorative corners that can be fixed immediately;

leaks can also appear at the joints of the walls with the cabin screen, and at the junctions of the screen with the pallet. To eliminate traces of leakage, the screen is removed, the joints with it are thoroughly cleaned of the remnants of the old silicone and filled with new, after which the screen is installed in its original place. All fasteners are securely clamped, and the structure is left until the sealant is completely dry (6-8 hours).

If you follow the basic rules of repair and use high-quality materials, you can forget about leaks for a long time. Your shower enclosure will now look and function like new.Plumbing equipment is faucets, nozzles, as well as water and sewer pipes hidden behind the shower. Leaks are associated not so much with the equipment itself, but with the places of its connection and connection. It is here that the tightness is most often violated for one reason or another, and the consequences of this violation can be deplorable. Therefore, it is necessary to solve the problem at the first sign of its appearance, but it is better to take preventive measures so that it does not appear at all.If leaks are detected, you will have to dismantle the cab in order to get to the place of connection to communications. As a rule, the hose fails.To repair it, it is tightly crimped with a metal clamp or completely replaced with a new one.Faucets in showers are different, and not all of them are repairable. Non-separable models cannot be repaired - they can only be replaced with serviceable ones. Collapsible joystick mixers are equipped with a cartridge, the replacement of which is a repair.Other types of shower stall failures - replacement of handles or rollers, etc. - can be repaired by yourself by replacing broken parts. In these cases, it is not necessary to completely dismantle the structure or carry out other complex actions.Often the reason for replacing plumbing is not its malfunction, but the repair in the bathroom. Photos with a shower cabin, with a bathtub or with their joint installation can be evaluated on our website.