Do-it-yourself juicer repair phillips in pyatigorsk

Service centers and workshops for the repair of juicers

Pyatigorsk, st. Ermolova, 12 view on the map

• Repair of kitchen appliances: juicers, blenders, aero grills, multicooker, mixers, bread makers, meat grinders

Warranty repair of ELECT, LUMME, Hisense

• - delivery of the juicer for repair by the service center
• - on-site repair of the juicer at home or in the office
• - service of replacement of consumables
• - services for the installation and configuration of equipment
• - sale of spare parts for juicer repair.

To install or configure the purchased equipment, you can use the services of specialists from authorized organizations (authorized service center), who will carry out all the necessary work for the further operation of the juicer. The addresses of all service centers on the map of Pyatigorsk are given at the beginning of the page. If there is no service center at the indicated address or is located at a different address, please let us know.

Looking for where to buy spare parts for Philips brand equipment or hand it over for repair under warranty or at affordable prices? Philips service centers in Pyatigorsk - 6 objects!

Philips service centers (Philips) in Pyatigorsk - ask opinions and reviews, addresses and phone numbers!

Pyatigorsk, Kalinina prospect, 19

Repair of juicers, household pumps, hoods, built-in ovens, blenders, coolers (for water).

Manufacturers: Philips, Blomberg, GASTRORAG, CATA, Fagor, Polaris.

Pyatigorsk, Nezhnova st., 21K3

Repair of juicers, meat grinders, microwave ovens, crepe makers, aero grills, tumble dryers, dryers.

Manufacturers: Philips, Asus, Acer, Candy, HP, Akai.

A juicer is a must-have equipment for all lovers of fresh juices. Autumn is harvest time. Fresh apples in the gardens of summer residents are pleasing to the eye. At first, it’s not clear how to deal with such volumes. Juicers come to the rescue. But, like any technique, sooner or later they break down. To make your life easier, you can repair a broken apparatus. Today there are many types of juicers, such as: Bosch (Bosch), Moulinex (Moulinex), Scarllet (Scarlet), Philips (Philips), SVA, Zhuravinka, Cameron (Cameron), First Austria (First Austria). The good news is that on the Internet you can find various videos on the topic of repairing juicers with your own hands.

Each juicer comes with instructions and an assembly diagram. But if you have been using the device for several years, the instructions could be lost. Even in this case, it will not be difficult to disassemble the device.

Having carried out repairs with your own hands, difficulties can arise only during the first disassembly.

The main thing is not to overdo it with efforts when disassembling. Otherwise, there is a risk of damage to the juicer body.

The juicer can be disassembled in several steps.

1. Make sure the power cord is unplugged.
2. We remove the product pusher from the loading compartment.
3. Remove the cover, having previously disconnected the mount.
4. Further, from under the lid, we take out the container that accumulates the already squeezed products.
5. We take out the chopper.
6. Disconnect the juice jug.

After disassembling the juicer body, then you need to remove the pulley. Usually, it is twisted off the shaft in the opposite direction from the working rotation.

To get to the bottom juicer motor, you need to:

1. Unscrew the screws securing the protective cover.
2. Remove engine guard, if fitted.
3. Remove the motor mount and remove it from the juicer housing.

There is an exception for auger juicers, which are similar in design to a meat grinder.

To disassemble them you need:

1. Remove the attachment.
2. Detach the receiving device with auger from the main body.
3. Remove the auger itself.
4. The engine itself can also be reached from below.

A breakdown of the juicer can be caused by both natural wear of materials and engine damage.

Remember that before disassembling the appliance, you should not just set the switch (lever) on the case to the Off position, but also completely disconnect the power cord from the power outlet.

The juicer motor can fail for several reasons:

1. Power supply voltage drops.
2. Due to prolonged operation and excessive stress on the juicer.
3. Due to liquid entering the juicer body.

If you do not have enough experience in repairing, it is better to seek help from a specialist.

Engine problems can be reported by:

1. Sparking and heating. This is the result of the abrasion of the brushes from the collector motors. The problem is solved by replacement.
2. The rotation of the armature shaft is impeded. The bearings should probably be replaced as they may have failed or become dirty. To prevent such damage, the juicer should be cleaned and the motor lubricated in good time.
3. If you smell burning and blackening is visible, the winding is most likely burnt out. This problem can be solved only by replacing the engine.

These are the main problems with juicers. And only one of them is serious. The first two can be solved quickly enough.

It would seem that everything has already been considered. How to disassemble the juicer is clear. What is the peculiarity of the Zhuravinka juicer? The peculiarity is that when you get to the engine compartment, you will not see any more mounts that would allow you to access the engine compartment.
Don't worry about this. All compartments are very tightly covered with a plastic disc, to which a grater-shredder was attached. It takes a lot of effort to remove it.

Independent repair of all types of juicers, including "Zhuravinka", is reduced to replacing broken parts, such as: wires, switch, bearings or electrical plug

To remove it, it is desirable:

1. Place the juicer on the floor and, holding it with your feet, pull the disc towards you.
2. If possible, you can ask someone to hold the case and carefully remove the disc yourself.

It is important to keep track of the effort you make so you don't break anything.

After removing the disc, four screws will be available to you, removing which you can get the engine and eliminate the cause of the breakdown. The Zhuravinka juicer is assembled tightly and quite simply. Unlike the First Austria juicer, which, according to numerous reviews, causes difficulties in disassembly, in disassembling the Zhuravinka juicer, additional efforts require only a disk that closes access to the engine.

Currently, Bosch juicers (bosch) with a capacity of 380w and 700w are gaining popularity on the market.
Assembling a Bosch juicer (bosch):

Bosch products continue to be associated with build quality, functionality and reliability

1. Insert the cake container into the engine block.
2. First insert the strainer insert with the spout into the hole in the motor block.
3. Now you need to insert the strainer. Check it for damage.
4. Next, you should install the cover, and press it so that it snaps into place. The switch must be in the Off position.
5. To trap the resulting foam, place a juice container with a large opening under the juicer drain.

To get juice, you need:

1. Place the juicer on a clean and smooth surface. Turn it on.
2. While the engine is running, put vegetables and fruits in the loading barrel. Use the pusher pushing down as gently as possible to avoid stress on the juicer motor.
3. Turn off the juicer only after all the juice has drained off.

Wait until the motor has come to a complete stop before opening the juicer. To open the lid of the juicer, you must first move the switch to the "open" position.

The pomace container must be emptied before the pomace rises to the top of the container, which should be grasped with your hands to remove it.

It is recommended to clean the strainer if:

1. The engine speed decreases.
2. The resulting juice became thicker.
3. The juicer vibrates significantly.

It is recommended to clean the cake container and strainer at the same time.

Whether it's spring, summer, autumn or winter, the body will always need juice. And it doesn't matter what kind of juicer you have: Bosch or Scarlett, Philips or Moulinex, the main thing is to understand the basic principles of assembly / disassembly of this device. So that, if necessary, replace the failed element. Let your juicer serve you long and productive. Make yourself and your loved ones happy every day.

Do-it-yourself juicer repair is not something fantastic. The device is quite simple and practically indistinguishable in different models. Whether it is a domestic juicer Dachnitsa or an imported one Bosch, they all work on the same principle, and are arranged in approximately the same way... With some knowledge in mechanics and electrics in stock, you can safely pick up a tool.

Juicer breakage is a common occurrence. This is not surprising, because such dacha paraphernalia experiences enormous stress during the harvest season. At the heart of every fruit and vegetable juice device is ordinary press... It doesn't matter in what form it is presented. The manual citrus juicer works by pressing and turning the fruit. The mechanical juicer is supplemented with units that allow to reduce physical efforts of a person and ensure greater productivity.

In any case, a decent load falls on the devices, and the increase in parts raises the percentage of breakdowns of the devices used. Even a manual juicer, presented as a press, where the pressure on the piston is produced by the rotation of the screw - and it is not always able to work reliably for a long time.

Repairing manual juicers is not that difficult. If we talk about electrical models, then the range of breakdowns is significantly expanded here. The search for a breakdown must be done in two directions: mechanics and electrical.

If your electric juicer shows no signs of life, makes a lot of noise or vibrates, do not start disassembling it right away. The reason is often very commonplace. The main thing is to make a thorough external examination.

1. It is necessary to check the presence of power in the network, the reliability of the plug-to-socket connection and the integrity of the power cord. The latter, quite often fails due to bends or exposure to sharp objects. If damage is found on the cord, it must be replaced. As a last resort, splice repair is possible. In this case, special attention should be paid to the insulation of the wires.
2. The noise and vibration of the juicer are the result of improper assembly of the device or foreign objects falling into the drum.
3. The hum of the motor when the drum is standing indicates that the adapter coupling is overtightened. Usually the problem is corrected by loosening this part.

Other malfunctions will most likely require disassembly of the device.

The device of any electric juicer is not complicated. An obligatory attribute is an electric motor, which supplies the lion's share of malfunctions. This household appliance uses motors collector type and asynchronous... Each of them has its own disadvantages and advantages.

The former allow to reduce the size and weight of the product, but are not designed for long-term operation and require cooling, which is provided by the impellers mounted on the shaft. Asynchronous electric motors are more efficient, but take up more space and, accordingly, are distinguished by increased mass.

The motors mate with the centrifuge drum or rotate the auger. Depending on the type of juicer (centrifugal or screw), the connection is carried out by couplings or gears. These parts are usually made of plastic and are the cause of malfunctioning juicers. As a rule, manufacturers always provide a stock of these parts by including them with the juicer they sell.

The juicer motor is very finicky and fails when:

• voltage drops in the network;
• long-term work under heavy load;
• moisture penetration into the engine compartment.

Damage can be caused by normal wear and tear.

For preliminary disassembly of the juicer, use the instructions attached to it. If one is not at hand, then you need to use logic.

Attention! You should never use excessive force when disassembling household appliances. This leads to the destruction of the case and mountings and is fraught with further problems. Manufacturers usually take care of customers and make this procedure as easy as possible.

After separating the remaining units from the engine compartment, they begin to disassemble it. A Phillips screwdriver is usually sufficient for this. After disassembling the compartment, the engine is freed from the couplings.

The speed switch and radio components included in the electric motor circuit are pre-checked. This operation is performed by the tester.

Even a superficial inspection of the motor can tell a lot about a malfunction:

1. Motor arcing and heat build-up are the result of abrasion or destruction of brushes (for collector motors). Replacing them will correct the situation.
2. Obstructed rotation of the armature shaft signals a failure or contamination of bearings... To remove them, you will need to disassemble the engine and use a puller. When assembling, pay special attention to the cleanliness of rubbing and rotating parts, as well as their lubrication. Regular cleaning and lubrication will help prevent this malfunction.
3. The smell of burnt insulation and blackening indicates burnt winding... Such a breakdown cannot be eliminated at home and requires the replacement of the entire unit.

Of all the points, only the last one is critical. All the rest are restored on their own, even with relative knowledge of electrical engineering.

Given the wide variety of juicers produced and produced today, it is difficult to describe all possible malfunctions of these units. Each of them may have their own specific case. But if you study the reviews of the owners of both domestic and foreign models, we can say that the main breakdowns are very similar.

Some useful information about the repair and maintenance of mechanical and electric juicers can be found in the video.