Do-it-yourself vitek juicer repair

In detail: do-it-yourself repair of a Vitek juicer from a real master for the site my.housecope.com.

Juicer repair: how to disassemble with your own hands, instructions for Bosch 700 w, Zhuravinka and Moulinex, Autumn and Scarlet

A juicer is a must-have equipment for all lovers of fresh juices. Autumn is harvest time. Fresh apples in the gardens of summer residents are pleasing to the eye. At first, it’s not clear how to deal with such volumes. Juicers come to the rescue. But, like any technique, sooner or later they break down. To make your life easier, you can repair a broken apparatus. Today there are many types of juicers, such as: Bosch (Bosch), Moulinex (Moulinex), Scarllet (Scarlet), Philips (Philips), SVA, Zhuravinka, Cameron (Cameron), First Austria (First Austria). The good news is that on the Internet you can find various videos on the topic of repairing juicers with your own hands.

Each juicer comes with instructions and an assembly diagram. But if you have been using the device for several years, the instructions could be lost. Even in this case, it will not be difficult to disassemble the device.

Having carried out repairs with your own hands, difficulties can arise only during the first disassembly.

The main thing is not to overdo it with efforts when disassembling. Otherwise, there is a risk of damage to the juicer body.

The juicer can be disassembled in several steps.

Make sure the power cord is unplugged.
We remove the product pusher from the loading compartment.
Remove the cover, having previously disconnected the mount.
Further, from under the lid, we take out the container that accumulates the already squeezed products.
We take out the chopper.
Disconnect the juice jug.

Video (click to play).

After disassembling the juicer body, then you need to remove the pulley. Usually, it is twisted off the shaft in the opposite direction from the working rotation.

To get to the bottom juicer motor, you need to:

Unscrew the screws securing the protective cover.
Remove engine guard, if fitted.
Remove the motor mount and remove it from the juicer housing.

There is an exception for auger juicers, which are similar in design to a meat grinder.

To disassemble them you need:

Remove the attachment.
Detach the receiving device with auger from the main body.
Remove the auger itself.
The engine itself can also be reached from below.

A breakdown of the juicer can be caused by both natural wear of materials and engine damage.

Remember that before disassembling the appliance, you should not just set the switch (lever) on the case to the Off position, but also completely disconnect the power cord from the power outlet.

The juicer motor can fail for several reasons:

Power supply voltage drops.
Due to prolonged operation and excessive stress on the juicer.
Due to liquid entering the juicer body.

If you do not have enough experience in repairing, it is better to seek help from a specialist.

Engine problems can be reported by:

Sparking and heating. This is the result of the abrasion of the brushes from the collector motors. The problem is solved by replacement.
The rotation of the armature shaft is impeded. The bearings should probably be replaced as they may have failed or become dirty. To prevent such damage, the juicer should be cleaned and the motor lubricated in good time.
If you smell burning and blackening is visible, the winding is most likely burnt out. This problem can be solved only by replacing the engine.

These are the main problems with juicers. And only one of them is serious.The first two can be solved quickly enough.

Don't worry about this. All compartments are very tightly covered with a plastic disc, to which a grater-shredder was attached. It takes a lot of effort to remove it.

Self-repair of all types of juicers, including "Zhuravinka", is reduced to replacing broken parts, such as: wires, switch, bearings or electrical plug

To remove it, it is desirable:

Place the juicer on the floor and, holding it with your feet, pull the disc towards you.
If possible, you can ask someone to hold the case and carefully remove the disc yourself.

It is important to keep track of the effort you make so you don't break anything.

After removing the disc, four screws will be available to you, removing which you can get the engine and eliminate the cause of the breakdown. The Zhuravinka juicer is assembled tightly and quite simply. Unlike the First Austria juicer, which, according to numerous reviews, causes difficulties with disassembly, in disassembling the Zhuravinka juicer, additional efforts require only a disk that closes access to the engine.

Currently, Bosch juicers (bosch) with a capacity of 380w and 700w are gaining popularity on the market.

Assembling a Bosch juicer (bosch):

Bosch products continue to be associated with build quality, functionality and reliability

Insert the cake container into the engine block.
First insert the strainer insert with the spout into the hole in the motor block.
Now you need to insert the strainer. Check it for damage.
Next, you should install the cover, and press it so that it snaps into place. The switch must be in the Off position.
To trap the resulting foam, place a juice container with a large opening under the juicer drain.

To get juice, you need:

Place the juicer on a clean and smooth surface. Turn it on.
While the engine is running, put vegetables and fruits in the loading barrel. Use the pusher pushing down as gently as possible to avoid stress on the juicer motor.
Turn off the juicer only after all the juice has drained off.

Wait until the motor has come to a complete stop before opening the juicer. To open the lid of the juicer, you must first move the switch to the "open" position.

The pomace container must be emptied before the pomace rises to the top of the container, which should be grasped with your hands to remove it.

It is recommended to clean the strainer if:

The engine speed decreases.
The resulting juice became thicker.
The juicer vibrates significantly.

It is recommended to clean the cake container and strainer at the same time.

Whether it's spring, summer, autumn or winter, the body will always need juice. And it doesn't matter what kind of juicer you have: Bosch or Scarlett, Philips or Moulinex, the main thing is to understand the basic principles of assembly / disassembly of this device. So that, if necessary, replace the failed element. Let your juicer serve you long and productive. Make yourself and your loved ones happy every day.

The basis of the juicer is the engine. Today, asynchronous, collector electric motors are used. No wonder - the technician knows no other. Actually, repairing juicers with your own hands of frequencies is faced with the situation of a failed engine. It is almost impossible to replace the mechanical part, devices operating on the basis of meat grinders break couplings, plastic bushings when a bone hits, hydraulic presses have a lot of fiddling with the oil system.Let's consider the questions, do not wait for a detailed guide, but we will consider the main types of faults in sufficient volume.

We hope that reading the review will help our readers to fix the juicer of their choice on their own. Nothing complicated inside. Don't be intimidated by the upcoming renovation of Scarlet's juicer.

Repair of the Rossoshanka, Santos juicer - the difference in the price of the product is 30 times - there is a motor inside. Rossoshanka does not work for long, noisy, the essence is the same. The properties of the juicer are determined by the design of the mechanical part.

The advantages of induction motors are considered to be simplicity of design, maintenance, high efficiency. Less noisy than collector ones, however, when powered with a voltage of 50 Hz, it is difficult to get rpm above 3000 rpm. Juicers consider this a serious limitation, Santos has a fairly large centrifuge diameter. Let's describe Rossoshanka, Neptune, and other domestic high-performance juicers in a similar way.

Collector ones are devoid of restrictions, they turn out to be smaller in size. Lose in other important professional juicers:

Noise level.
Short period of continuous operation.

On the shaft of electric motors, we see impellers blowing over the stator coils. It is made to cool the windings during operation. If, when disassembling the juicer, it was found: there are no elements inside, it is possible to supplement the design by wisely choosing the shape of the blades. Will soften the thermal modes of operation of the electric motor. From the above it follows: asynchronous motors are preferable for the manufacture of high-quality juicers, it remains to solve the problem of speed.

In the case of centrifugal models, the issue is leveled by an increase in the diameter of the working chamber. As a result, with increasing distance from the axis, the centrifugal force increases. It is permissible to reduce the speed of the juicer motor without loss of quality.

Each device is supplied with a set of speeds. In asynchronous motors, it is realized by proper separation of the stator coils. Not all work at the same time, the result is a variation in speed. The scheme is often implemented, it consists in the correct commutation of the electrical circuit with buttons. The technical solution has great reliability, durability, and fault tolerance. A positive point. As for the speed, you can increase it using an inverter in the circuit. It is clear that it will lead to an increase in the price of the device at times. Smooth speed control can be achieved.

As for asynchronous motors, it is easy to do. Amenable to adjustment, avoiding complex circuits. Losses are reduced if the windings are supplied with direct current. Inductive resistances have little effect. The minus is small: a complex power supply is required, which reduces the efficiency of the juicer. The listed key points must be clearly understood if there is a desire to replace the engine. Readers can insure against winding burnout by bothering to include a thermal fuse at 135 degrees Celsius in the circuit. The element must fit snugly against the winding. Ideally, the thermal fuse is recessed between the turns of the wire. Provides heat exchange.

Forced cooling will not interfere. How it is done in the case of juicers, any devices, have already been told. You can borrow an induction motor starter relay from the refrigerator, along with the motor. There are two subtleties here:

In juicers, a starting winding is rarely used; a scheme with dividing the stator coils is used.
The motor type must match the relay, the overheating protection will not work.

There is a weak point in cheap juicer models: they are not protected against engine burnout. Why not put a relay like a companion for refrigerators. A difficult question, we leave it to the readers to decide on their own. The cost of other freezers is an order of magnitude (!) Lower than top-end juicers.The refrigerator works day and night, avoiding begging for the required break, does not turn off in summer. The power of the device is considerable.

For our reasons, reliable technology is closer to nature, figuratively speaking. This is directly confirmed by the design of the Norwalk juicer. So in a refrigerator, often all sensors have nothing to do with electrics, much less electronics. We need more bimetallic plates, thermocouples and other reliable and simple equipment. By the way, gas water heaters do just that, even ignition on a piezoelectric element. In this case, the technique works for a long time, is reliable and efficient. Overheating of the windings is easy to assess by the temperature of the magnetic circuit. Why isn't it done in juicers? Unable to answer this question.

What about Norwalk? Do-it-yourself juicer repair in this case is closely related to hydraulics, which was already mentioned at the beginning. Design:

There is a high-speed engine inside.
The auger is put on the shaft according to the principle of action of a meat grinder.
The ground cake is put into a bag and placed on the table of the hydraulic press.
The oil cylinder is driven by a belt drive, as in washing machines.

Thanks to a clever solution, the compressor is devoid of electrical parts. Steel block with spacers. The motor, on the other hand, is made in the best traditions of the machine. One glance is enough to understand: in 5 minutes it will not ask for rest, imitating Zelmer. In light of the above, we believe that it is enough to find a Norwalk screw juicer attachment instead of a meat grinder, having received an excellent device for a long-term operation. According to domestic GOST, it means that the equipment can withstand merciless operation during a work shift (8 hours).

The hydraulic unit will need to be filled with new oil periodically. The old is merged first. After removing the cylinder cover, it is supposed to remove the internal mechanism with a return spring, scoop out the oil. Keeping the position, the compressor drive starts. Gradually the oil will be in the cylinder. The new is poured three-quarters of an inch below the lid. Will the air gap interfere with the work? Masters say: powerless to harm. You will need to track fittings, compressor, cylinder leaks. Add, the return of the table to its original position is carried out by a spring after pressing the handle of the release valve.

If it comes to attachments for meat grinders, you will have to change plastic gears and couplings. They come in a quantity of 2-8 in a set, sometimes you have to buy new ones. Steel gears of meat grinders-juicers are rare, there is a chance of failure of a precious engine. You wonder how industrial units work ...It is clear to readers that the main types of faults relate to the engine. First check the power supply, then the continuity of the windings begins. Having localized the malfunction, they try to rewind the coils. In the case of a collector motor, doable, the stator is a dull choke strung on a magnetic circuit. The manifold motors are called for each position of the section until the drum completes a full revolution. The rotor of the squirrel-cage induction motor is incapable of burning. The current is small, copper wire is often inseparable from the base of the "squirrel cage" by insulation. The device of the juicer is so primitive, the mechanics (bearings, oil seals, gears) and the drive break down.They talked about the repair of power supplies more than once. Impulse sources are found in expensive models equipped with the rudiments of intelligence.Fans of freshly squeezed juice and happy owners of devices for its extraction inevitably face the problem of how to disassemble their favorite juicer without fatal consequences for its functionality. There are many such household appliances on the market under different brands.They can be made in four versions:

centrifugal type,

with auger wringing,

combined,

machines for citrus fruits.

Regardless of the model, device, brand and quality of workmanship, they all require regular maintenance. During the squeezing process, cake accumulates inside the machine, juice residues, which must be removed after each use. Delaying with this can adversely affect the functionality of the device, lead to its premature inoperability. Despite the reliability of the design, most branded devices may fail. Depending on the nature of the breakdown, repairs can be difficult, which will require special knowledge and the participation of an expert, or simple. In the latter case, you can do it on your own, for which you will need to dismantle the structural elements of the juicer.To disassemble / assemble the device, you must have at least a general idea of its design. Devices for squeezing can have different designs and design features. But in general terms, their structure is about the same. Each juicer is equipped with:

housing for mounting structural elements;

metal (less often plastic) basket with a grater, where the product is chopped;

container for the accumulation of cake;

removable container for collecting juice;

lid with a hopper for loading vegetables or fruits;

pusher;

motor unit with power cable;

control unit with switch.

How to fix a juicer with your own hands, types of engines.

To fix a juicer yourself, you need to know the type of device and what kind of motor is inside. If the breakdown is associated with the engine, then you can repair the product yourself, depending on the complexity of the problem. But in some situations, every housewife can independently repair the juicer.

What types of electric motors are there?

Regardless of the cost of a juicer, if there is a motor inside, then its structure is very similar. The only difference is that cheaper models are noisy, while products of higher cost emit less noise. The specific properties of the juicer, with the exception of the noise level, depend on the mechanical design.

In juicers of cheaper models, the motors are most often asynchronous. They are distinguished by simplicity of design and maintenance, and have high efficiency. Such motors make a lot of noise and require a sick-diameter centrifuge. There are brushed motors that have no restrictions. The juicer with these motors is smaller.

The electric motor shaft includes impellers that blow the stator coils. This is necessary in order to cool the winding during the operation of the devices. Some people disassemble juicers and see that there are no described elements inside. In such a situation, if courage allows, the design can be supplemented with them yourself. It is important to choose the correct shape of the blades and such an addition will soften the thermal conditions of the engine.

Some modern juicers have a centrifuge. Due to its presence, the diameter of the working chamber must be increased. This causes the centrifugal force to increase, reducing the engine speed. Juice quality will be slightly lower.

What can break in a juicer?

The easiest way is to fix the attachment yourself. Replacement of the plastic gear or clutch is often required. The set of these elements can be from two to eight, if necessary, you should purchase new parts. Steel gears in juicers are rare. If they fail, then buying new products will cost more than buying a new household appliance. Typically, steel gears are found on large industrial units.

The main malfunctions will relate to the engine, it is for this reason that so much attention has been paid to its design in this article. First, the power is checked, then the winding. If there are problems with the winding, then you must try to wind the coils again.

Brush motor problems are easier to troubleshoot. After all, the starts in such models is an ordinary choke strung on a wire with a magnet. For each section position, these motors are started separately. Therefore, until the drum completes a full revolution, it will be possible to diagnose the malfunction. In an induction motor, the rotor cannot burn out due to the fact that a current of sufficient strength does not pass through it. But the copper wire may separate from the base.The juicer looks quite solid and dimensional, but its design is so primitive that in most cases only the mechanics or the drive breaks down.

It is possible that a hostess without experience in disassembling and assembling household appliances will find it difficult to deal with the mechanics of a juicer. In such a situation, you need to turn to one of the men, because, the basics that are described in this article, they are taught at school at work. If it is difficult to fix the malfunction on your own, then it is better to go to a service center.

At the heart of any juicer model is a built-in motor, which is responsible for the operation of the entire device. Today, juicers use either commutator or asynchronous motors. Just, juicer repair most often required from a broken motor. It is almost impossible to change the mechanical part of the device. Let's take a closer look at typical juicer malfunctions.

The advantages of asynchronous juicer motors are that their design is very simple, they are highly efficient and easy to maintain. Such engines are not very noisy during operation, compared to collector engines. But, unfortunately, at a frequency of 50 Hz, one cannot get more than 3000 rpm. This is a significant limitation for juicers. Brush type motors do not have such restrictions. Also, their dimensions are smaller than asynchronous motors. Their disadvantages are in the increased noise level during operation, and in a short service life.

On the shaft of any type of engine, impellers are installed, which serve to blow off the stator coil. This is necessary so that during the operation of the device the windings did not overheat and cooled. If you disassemble the device and find that there are no such parts in it, then you can pick them up yourself. Thus, you can improve the functioning of the electric motor. Typically, a juicer has several speeds. In asynchronous types of motors, this is done by a section of the stator coils. Not all coils can be used at the same time, due to which the speed of the juicer is switched. A similar scheme is used very often in juicers, its effectiveness depends on the correct installation of the electrical circuit.

Basically, in juicers, a starting winding is not used, but a circuit with dividing coils is used. In order for the motor protection to work, it must be fully consistent with the installed relay.

So, as you already understood, most of the serious breakdowns of juicers concern their engine. To find out the cause of the malfunction and eliminate it, you must first disconnect the device from the mains. Next, you need to ring the windings. Try winding the coils around the stator again. Note that the rotor never burns out, since the current that passes through it is very small. The mechanism of the juicer is so simple that only gears, oil seals or bearings can be damaged in it.

If you have not bought such a device yet, and you will have selection of juicer, then pay attention to the type of its engine and the parts that are installed in it.

Each juicer comes with instructions and an assembly diagram.But if you have been using the device for several years, the instructions could be lost. Even in this case, it will not be difficult to disassemble the device.

Having carried out repairs with your own hands, difficulties can arise only during the first disassembly.

The main thing is not to overdo it with efforts when disassembling. Otherwise, there is a risk of damage to the juicer body.

The juicer can be disassembled in several steps.

Make sure the power cord is unplugged.
We remove the product pusher from the loading compartment.
Remove the cover, having previously disconnected the mount.
Further, from under the lid, we take out the container, which accumulates the already squeezed products.
We take out the chopper.
Disconnect the juice jug.

After disassembling the juicer body, then you need to remove the pulley. Usually, it is twisted off the shaft in the opposite direction from the working rotation.

To get to the bottom juicer motor, you need to:

Unscrew the screws securing the protective cover.
Remove engine guard, if fitted.
Remove the motor mount and remove it from the juicer housing.

There is an exception for auger juicers, which are similar in design to a meat grinder.

To disassemble them you need:

Remove the attachment.
Detach the receiving device with auger from the main body.
Remove the auger itself.
The engine itself can also be reached from below.

A breakdown of the juicer can be caused by both natural wear of materials and engine damage.

Remember that before disassembling the appliance, you should not just set the switch (lever) on the case to the Off position, but also completely disconnect the power cord from the power outlet.

The juicer motor can fail for several reasons:

Power supply voltage drops.
Due to prolonged operation and excessive stress on the juicer.
Due to liquid entering the juicer body.

If you do not have enough experience in repairing, it is better to seek help from a specialist.

Engine problems can be reported by:

Sparking and heating. This is the result of the abrasion of the brushes from the collector motors. The problem is solved by replacement.
The rotation of the armature shaft is impeded. The bearings should probably be replaced as they may have failed or become dirty. To prevent such damage, the juicer should be cleaned and the motor lubricated in good time.
If you smell burning and blackening is visible, the winding is most likely burnt out. This problem can be solved only by replacing the engine.

These are the main problems with juicers. And only one of them is serious. The first two can be solved quickly enough.

It would seem that everything has already been considered. How to disassemble the juicer is clear. What is the peculiarity of the Zhuravinka juicer? The peculiarity is that when you get to the engine compartment, you will not see any more mounts that would allow you to access the engine compartment.
Don't worry about this. All compartments are very tightly covered with a plastic disc, to which a grater-shredder was attached. It takes a lot of effort to remove it.

Independent repair of all types of juicers, including "Zhuravinka", is reduced to replacing broken parts, such as: wires, switch, bearings or electrical plug

To remove it, it is desirable:

Place the juicer on the floor and, holding it with your feet, pull the disc towards you.
If possible, you can ask someone to hold the case and carefully remove the disc yourself.

It is important to keep track of the effort you make so you don't break anything.

After removing the disc, four screws will be available to you, removing which you can get the engine and eliminate the cause of the breakdown. The Zhuravinka juicer is assembled tightly and quite simply.Unlike the First Austria juicer, which, according to numerous reviews, causes difficulties in disassembly, in disassembling the Zhuravinka juicer, additional efforts require only a disk that closes access to the engine.

Currently, Bosch juicers (bosch) with a capacity of 380w and 700w are gaining popularity on the market.
Assembling a Bosch juicer (bosch):

Bosch products continue to be associated with build quality, functionality and reliability

Insert the cake container into the engine block.
First insert the strainer insert with the spout into the hole in the motor block.
Now you need to insert the strainer. Check it for damage.
Next, you should install the cover, and press it so that it snaps into place. The switch must be in the Off position.
To trap the resulting foam, place a juice container with a large opening under the juicer drain.

To get juice, you need:

Place the juicer on a clean and smooth surface. Turn it on.
While the engine is running, put vegetables and fruits in the loading barrel. Use the pusher pushing down as gently as possible to avoid stress on the juicer motor.
Turn off the juicer only after all the juice has drained off.

Wait until the motor has come to a complete stop before opening the juicer. To open the lid of the juicer, you must first move the switch to the "open" position.

The pomace container must be emptied before the pomace rises to the top of the container, which should be grasped with your hands to remove it.

It is recommended to clean the strainer if:

The engine speed decreases.
The resulting juice became thicker.
The juicer vibrates significantly.

It is recommended to clean the cake container and strainer at the same time.

Do-it-yourself juicer repair is not something fantastic. The device is quite simple and practically indistinguishable in different models. Whether it is a domestic juicer Dachnitsa or an imported one Bosch, they all work on the same principle, and are arranged in approximately the same way... With some knowledge in mechanics and electrics in stock, you can safely pick up a tool.

Juicer breakage is a common occurrence. This is not surprising, because such dacha paraphernalia experiences enormous stress during the harvest season. At the heart of every fruit and vegetable juice device is ordinary press... It doesn't matter in what form it is presented. The manual citrus juicer works by pressing and turning the fruit. The mechanical juicer is supplemented with units that allow to reduce physical efforts of a person and ensure greater productivity.

In any case, a decent load falls on the devices, and the increase in parts raises the percentage of breakdowns of the devices used. Even a manual juicer, presented as a press, where the pressure on the piston is produced by the rotation of the screw - and it is not always able to work reliably for a long time.

Repairing manual juicers is not that difficult. If we talk about electrical models, then the range of breakdowns is significantly expanded here. The search for a breakdown must be done in two directions: mechanics and electrical.

If the electric juicer shows no signs of life, makes a lot of noise or vibrates, do not start disassembling it right away. The reason is often very commonplace. The main thing is to make a thorough external examination.

It is necessary to check the presence of power in the network, the reliability of the plug-to-socket connection and the integrity of the power cord. The latter, quite often fails due to bends or exposure to sharp objects. If damage is found on the cord, it must be replaced. As a last resort, splice repair is possible. In this case, special attention should be paid to the insulation of the wires.
The noise and vibration of the juicer are the result of improper assembly of the device or foreign objects falling into the drum.
The hum of the motor when the drum is standing indicates that the adapter coupling is overtightened. Usually the problem is corrected by loosening this part.

Other malfunctions will most likely require disassembly of the device.

The device of any electric juicer is not complicated. An obligatory attribute is an electric motor, which supplies the lion's share of malfunctions. This household appliance uses motors collector type and asynchronous... Each of them has its own disadvantages and advantages.

The former allow to reduce the size and weight of the product, but are not designed for long-term operation and require cooling, which is provided by the impellers mounted on the shaft. Asynchronous electric motors are more efficient, but take up more space and, accordingly, are distinguished by increased mass.

The motors mate with the centrifuge drum or rotate the auger. Depending on the type of juicer (centrifugal or screw), the connection is carried out by couplings or gears. These parts are usually made of plastic and are the cause of malfunctioning juicers. As a rule, manufacturers always provide a stock of these parts by including them with the juicer they sell.

The juicer motor is very finicky and fails when:

voltage drops in the network;
long-term work under heavy load;
moisture penetration into the engine compartment.

Damage can be caused by normal wear and tear.

For preliminary disassembly of the juicer, use the instructions attached to it. If one is not at hand, then you need to use logic.

Attention! You should never use excessive force when disassembling household appliances. This leads to the destruction of the case and mountings and is fraught with further problems. Manufacturers usually take care of customers and make this procedure as easy as possible.

After separating the remaining units from the engine compartment, they begin to disassemble it. A Phillips screwdriver is usually sufficient for this. After disassembling the compartment, the engine is freed from the couplings.

The speed switch and radio components included in the electric motor circuit are pre-checked. This operation is performed by the tester.

Even a superficial inspection of the motor can tell a lot about a malfunction:

Motor arcing and heat build-up are the result of abrasion or destruction of brushes (for collector motors). Replacing them will correct the situation.
Obstructed rotation of the armature shaft signals a failure or contamination of bearings... To remove them, you will need to disassemble the engine and use a puller. When assembling, pay special attention to the cleanliness of rubbing and rotating parts, as well as their lubrication. Regular cleaning and lubrication will help prevent this malfunction.
The smell of burnt insulation and blackening indicates burnt winding... Such a breakdown cannot be eliminated at home and requires the replacement of the entire unit.

Of all the points, only the last one is critical. All the rest are restored on their own, even with relative knowledge of electrical engineering.

Given the wide variety of juicers produced and produced today, it is difficult to describe all possible malfunctions of these units. Each of them may have their own specific case.But if you study the reviews of the owners of both domestic and foreign models, we can say that the main breakdowns are very similar.

Some useful information about the repair and maintenance of mechanical and electric juicers can be found in the video.