In detail: do-it-yourself starter repair Honda stream from a real master for the site my.housecope.com.
I have the same bullshit. Such a grinding, crunching, I do not know how to describe this sound at the plant. it hurts to listen. At home, artisanal conditions, how difficult is it to clean the starter? Or is it better to go to the service station to the specialists?
What is the best way to lubricate the starter? malt?
Better with a maslopul, if it's serious, I bought Shell grease in a yellow tube and I smear everything with it.
by 1.7 too. took off the battery, completely inlet, disassembled the starter (an hour and a half of fiddling) and then I had a plastic pin in my hands, on the cat. the contact washer is holding broken off, how it was holding, I don’t understand 
I came znachitstsa from the morning in the special. an office called Bendix. Showed a plastic mask. Well, there is no such new one, only if you remove it from the old one. - go to the shop and take a look. I came to the shop. showed - right now we will pick up the grill. is there a starter? - Yes. here it is. -Stream? - yeah. pull out the box into the cat. PC. There are 10 such starters. and they ask, why did you get into it? - yes scrolled gru.
- well listen to tady. there are 2 options. you can disassemble it, replace the rollers there with a little more (you need to flare something there), only we will not give you a guarantee for repairs, tk. half of the starters are then brought back to us under warranty. unsuccessful design initially. how much mileage - 81 t.km. gru.
and the second option - on parsing for 8-9 tr. gru? - No. answer. on parsing, but only from the CRV take (3 thousand worth). Will stand up as a native and reliable design.
these are the pies with kittens.
I came znachitstsa from the morning in the special. an office called Bendix. Showed a plastic mask. Well, there is no such new one, only if you remove it from the old one. - go to the shop and take a look. I came to the shop. showed - right now we will pick up the grill. is there a starter? - Yes. here it is. -Stream? - yeah. pull out the box into the cat. PC. There are 10 such starters. and they ask, why did you get into it? - yes scrolled gru.
- well listen to tady. there are 2 options. you can disassemble it, replace the rollers there with a little more (you need to flare something there), only we will not give you a guarantee for repairs, tk. half of the starters are then brought back to us under warranty. unsuccessful design initially. how much mileage - 81 t.km. gru.
and the second option - on parsing for 8-9 tr. gru? - No. answer. on parsing, but only from the CRV take (3 thousand worth). Will stand up as a native and reliable design.
 |
Video (click to play). |
04/02/2017 06:21 2017-04-02T03: 21: 49.000Z
Does the starter not turn the engine? Why does not the starter turn the reasons, the starter clicks but does not turn, repair the starter with your own hands. In what cases will the replacement of the starter brushes help, or we put the complete brush assembly on the starter. Let's consider the example of repairing a Honda Stream starter with our own hands.
All the answers to your questions in the garage
Thanks for the real help
How to independently determine the malfunction of car systems and make repairs yourself. Suspension, steering, fuel system and ignition, lubrication and cooling system, brake, transmission and electrical equipment of your vehicle. How to make repairs with your own hands and with a simple tool, how to change oil and fluids, how to install repair kits and much more, not complicated, but interesting and useful in "Garage No. 6".
Does not Twist Starter Honda Stream. "Garage number 6". DIY Starter Repair
Does the starter not turn the engine? Why does not the starter turn the reasons, the starter clicks but does not turn, repair the starter with your own hands. In what cases will the replacement of the starter brushes help, or we put the complete brush assembly on the starter. Let's consider the example of repairing a Honda Stream starter with our own hands.
All the answers to your questions in the garage
How to independently determine the malfunction of car systems and make repairs yourself.Suspension, steering, fuel system and ignition, lubrication and cooling system, brake, transmission and electrical equipment of your vehicle. How to make repairs with your own hands and with a simple tool, how to change oil and fluids, how to install repair kits and much more, not complicated, but interesting and useful in "Garage No. 6".
Hello! Toyota ist. In cold weather, at the first start, the solenoid relay is disconnected with a delay of 1, 2 seconds
If you give your number, I will call, there was another problem, there is no charging
Maybe I misunderstood. Which of the two is yours? You hold the key at the start, and the relay turns off by itself (after 1-2 seconds), slightly twisting the starter, preventing the engine from starting. Or, the bendix does not disengage for a while (1-2 seconds), after releasing the key
Went through and smeared. Maybe the coil itself?
Go over with flushing and lubrication.
Timur Magomedov Hace 3 meses
Thank you, man, you are handsome. Take a video with the relay problem, how to identify, if not difficult
Dmitry Vtorikh Hace 3 meses
after last winter, my startel also began to emit such a sonorous noise at startup or after I immediately release the ignition key
Engineer Wind skidded Hace 4 meses
Why was “CV joint” selected as a lubricant?
Designed for high mechanical stress in a wide temperature range.
Eric Akhmatov Hace 7 meses
Replace the starter from srv rd1 fits one to one even better
Sergey Kazakov Hace 7 meses
good afternoon. I have a honda civic 2003 7 the problem is that sometimes the starter turns but does not turn the engine. just idling the starter turns. What is the problem and how to solve it? HELLO FROM BAKU
If the starter motor works, but does not turn the engine, then the problem is in the bendix. It is on sale and it is not difficult to change.
The video is wonderful, everything is clear. During the first installation, there was a problem, the starter buzzes, but does not twist. I took it off, wanted to disassemble it, but saw that the starter gear was sunk into the depths. He moved it towards the engine, put it on - everything is fine, it starts. Maybe I did something wrong? If you can tell me
According to the tape thread on the shaft of this starter, the gear itself should engage without jamming when the shaft is rotated during start-up. On the removed starter, it should slide without effort. If the starter is with a traction relay, then the gear moves along the shaft with a fork.
Zhanybek Asanaliev Hace 8 meses
+ Zhanybek Asanaliev The relay for interrupting the current to the starter is located in the unit under the dashboard. Contact between red and white wires.
Azamat Mamatsabyr Hace 9 meses
And what is the name of the kit that was replaced, that is, what should I look for? Thank you.
Azamat Mamatsabyr Hace 9 meses
Original number 04312-PSA-305
Azamat Mamatsabyr Hace 9 meses
Gevorg Andreasyan Hace 9 meses
eısevər aılşov Hace 9 meses
Thank you very much for your help, God bless you.
Come to me. Let's talk and do everything.
+ Ibragim Halimov Error p2413? Unscrew the sensor (12 thin key). Saw the ring and cut the halves. Clean it up. The stem should move easily and the resistor track should not be rustled. If anything, gently press the brushes to the track. Then you will put on the ring, it will fit well.
+ Ibragim Halimov On the EGR valve sensor, if the track is worn out, then there is no way to restore it. Check the smooth regulation of the track resistance.
eısevər aılşov Hace 9 meses
Garage No. 6 how can the valve lift sensor be removed and repaired if there is a voltage?
+ Ibrahim Halimov Glad that I helped 🙂
Mikhail Krotov Hace 10 meses
Young people! Everything is intelligible and smart. There was exactly the same reason, thanks to your video, I got off with rather modest expenses. Thank you.
Ediko Sadabaev Hace 10 meses
Vitalya Olegych Hace 10 meses
why change the rod? You didn't even break it when parsing it.
Vitalya Olegych Hace 10 meses
Garage No. 6, well, also the right to life) And you can also use the metal crank extension when putting on the stator, but for example the handle of a hammer, it is conveniently not magnetised and there is always
Was it necessary? A plastic part, in high temperature modes, with a disassembled starter, is available. And not to change?
Sergey Skorokhod Hace 10 meses
He gets over within 5-9 minutes
Is there an article for a repair kit?
Garage number 6 brushes price 800r, went through greased twists perfectly. Thank you!
Alexey Ilyushin Hace 11 meses
In the summer I washed the engine (maybe coincidentally, xs). The starter stopped turning: the turn would be done and everything, as if there was not enough strength. Then the problem went away (4 times it was like this, but it started later). Cold came, at -15 did not start. The new Akum put the same garbage, the turnover will do everything. I didn’t start. Can brushes too?
Alexey Ilyushin Hace 11 meses
Garage # 6 solved the problem. The brushes on the plus are worn out. The price of a brush holder in Krasnoyarsk is 800 rubles. Thank you very much for the video!
+ Alexey Ilyushin Clean up and lubricate all the masses under the hood.
Vitya Pavlovich Hace un año
Can you please tell me I have a 1996 Honda Civic 1.4 on the move Clem disappeared corrected this matter and started clicking the starter what is the reason ??
You can now buy another starter, because you don't have to hammer on starters with fixed magnets, as these magnets crack just fine.
+ Vitya Pavlovich Shoot, disassemble and everything will be immediately visible. It is not difficult and not long.
Vitya Pavlovich Hace un año
Garage number 6 do not go away knocking)
+ Vitya Pavlovich Hit him with a hammer. If there are brushes, they will come closer to the rotor blades from vibration and the starter will come to life.
Vitya Pavlovich Hace un año
Garage number 6 when I turn it click with the ignition key, the retractor works but does not penetrate!
Evgeny Balyazin Hace un año
Akb has nothing to do with most likely wiring!
Evgeny Balyazin Hace un año
Can you please tell me my honda stream k20a starter silks but does not twist changed a new retractor serovno all the same brushes normal 3 starter contracted in sometimes 30-40 minutes it starts working again what could be the problem?
If the retractor relay clicks, but the starter does not turn, while the lamps on the dashboard go out, the culprit is the battery. After a while, it restores its capacity, but the current is enough to twist it once, although there is enough force to pull it in. Also check the wiring and contacts from the battery to the starter and ground.
Thank you, man. This is exactly the kind of breakdown that happened. Everything works perfectly.
Alexey Losev Hace un año
Show me how to COLLECT in the (wilderness) of the brushes?
+ Alexey Losev Dolbanul on the starter, started and went to the store. Bought any and sit and grind to size. And if you find any brushes, then the soldering iron is definitely there.
Roman Abdurahmanov Hace un año
on the Honda step RG body K 24 And the same starter? SECOND when you start it rumbles knocking what could be the problem
Vitalya Olegych Hace 10 meses
Garage No. 6 on k24 has the same starter design as on your stream. And the retractor is built in. With a remote control, it is certainly safer.
+ Roman Abdurahmanov Restore the pressure planes of contact pairs
Roman Abdurahmanov Hace un año
to grind with a file is it like?
+ Roman Abdurahmanov On k24a starter with retraction. Here the contacts burned in it. Disassemble, file with a file and let it work further 🙂
Arina28 Bogdanova Hace un año
On the d17a engine, the starter is a disease, therefore, a dear road. We throw out the native starter and set it from crv.
from the central control panel and from the step it is suitable, only the wires do not fit a little and you have to remove them from the fasteners
Arina28 Bogdanova Hace un año
Alexey Losev Hace un año
Arina28 Bogdanova He's with a retractor! fit?
Yes, I agree, its design is still that flight of thoughts. You can also have another one, if you have one. We have a town 50 kilometers from civilization, therefore, the repair option is always considered first of all 🙂
Often the starter bushing is loose and it drains the battery a lot. It is necessary to press in a new one.
Alexey Ilyin Hace un año
Changing the screensaver to a short one was good!) And the video is clear, everything is simple and clear
Arkady Badareev Hace un año
Now about the retractor relay video is necessary. To generally appreciate the instructiveness of the video. It's not very clear to me why the author immediately decided that it was the starter that was faulty, and not the relay or something else.
+ Arkady Badareev If the starter does not show signs of life, then we check the relay and “something else” 🙂
Honda Stream does not turn the starter. "Garage number 6".DIY starter repair.
[music] hello guys today drove the car to a row of 2 ties, or rather a tie, the reason for which will grow gradually
did not behave well, and the starter at startup, well, understand how he did not relate to this very adequately
that's why I'm learning what to do in the yard next to the house they are somewhere on the road at gas stations in cities then in the summer he knocks everywhere and from the cards
therefore, we will now consider the reasons why we have a slide of thousands of starters and how to check this first, we check
the operation of the battery can be checked even and opens the hood as you are sitting behind the wheel a key to start it into something
misunderstandings, therefore, first we pay attention to the dashboard light, now I will show you how it looks
while driving and try and start your car, we look carefully at the light bulbs with the key to start, the stacker does not want to start
maybe, but the light bulb did not write us down much, so our battery is quite healthy and holds this current now it's time to go out
out of the car and see what we have under the hood means introduce yourself to us, the panel light bulbs begin to fade out the culprit in this or
the battery or cream we are poorly planted are oxidized, and it can also minus the cable we have goes to the mass of the body
here there is a boat under this terminal it often happens a pencil dirt damp everything else needs to be unscrewed cleaned lubricate it to plant well because
the starter needs a lot of current, therefore, through some point contacts to it, there is simply no current through these points
will pass, therefore, the power cables here, you need to check everything up to 6, we have a starter at all, the retractor does not click does not spin in
this will be the fault of the relay relay is checked separately here we will not consider it because
and without any devices and skills, but in some cases, if someone needs it, I will shoot a video of how to check we were digging the rest of the defects
toilets can be punched and only removed from the engine, this is only a stream 17 engine and removes the interior easily and great if you
clean up the city air filter title on top of the engine many some have tried to remove and mount it through the pro brand
it will absorb where it seems to me it knows and is incredibly difficult and probably for a very long time.
this is where you want to howl and sleep. no need to invent anything or listen to those wrong it was the strength to carry it right
well, no more than two minutes have passed, which means we unscrew the battery, unscrew the five bolts, these are
fastening our air vent 5 a boat, this is here, it fixes the branch pipe itself, it just then we remove it to make it easier
the starter itself is underneath, we will see here it is great to get the nut, contacts and all to its fasteners, therefore
now I'm taking it off then we'll see what's wrong with it, just in case, I'll show it, remove the cap, unscrew the nut, then this little thing
with the brotherhood, there is just a contact and two bolts that fasten the engine casing by 14 I will unscrew it all badly in it
add water [music] leave it in our hands now let's see what he lacked [music] there is still such a defect
when the winding burned out, it’s just by the smell it will be very good to feel it is not necessary no measurements have smelled anything everything
normally nothing stinks will be very unpleasant smells of burnt insulation an unpleasant smell you will immediately feel
guns, which is wonderful then the condition of the flamel and contact here are private, three small ones will be cleaned
fine sandpaper like this in a circle you can clean up here there are no burnouts any this is very good everything is ok still here
these are the places between the rollers to chew them, but also walk well with some kind of sharp little com-type tool
a screwdriver just to remove a little from there this dirt, it can also only be about water and these small paths are only about
water, if they are useless, well, that's the reason for our defect, the brushes are very short and worn out and here on the upper
it can be seen that they almost never come out of their nest, so there is especially no contact with the rotor blades and there is no
gradually wears off, the starter worked worse and worse, so we will change the brushes, we will install new ones how to do it
I'll show you now if you are caught by this failure somewhere far from home or in the wilderness, then I cut the brushes leaving the ends
small to these ends, you can attach any brushes that you find in a store in any village.
AvtoVAZ brushes, but they will have to be processed with a file so that they fit with us our landing nests if we are
among people among shops when we buy a brush assembly assembled here what goes well with you
pieces with a contact washer new fluff new detailed washer that puts on the stem and of course completely new
a set of brushes and our springs glasses already tucked into place conceal only to put the rotor and press them there, they issue accounting with us
and will be assembled to get rid of this brush assembly, we remove the release step further, the spring contact washer and take out
[music] [music] hiring the main gear it needs to be tidied up small and also
in order for us to change this our plastic rod, washing the vd-40, I will continue with compressed air now both purity and beauty
now you can start collecting everything that was pulled out everything in place we put this thing this way is put here do not forget 3
springs glasses like this, if you have not yet lost on which they should rest against, these mustaches are lubricated all along the way, we collect in the reverse order
here you can put the uterus CV joint put 6 roses in place we bring cleanliness and put on the brush unit I put it on the rod
we need to dress him well to the end, so lift the elastic band to the end with such a click, because here we need to dress
shoble the side with pimples put down the side of the contacts on top of the pressure spring and the crimp
a washer a crimp washer is best worn, you can take a head for 10 to put it on pieces so that it is easier in the loss not to rest against
our brush, we first introduce them in this way so that they hide away from the brush someone will
it's easier to go very well and the second interesting moment, I think it's unlikely to stand up the first time a photo to cope with that fellow that's it
our 100 throne magnetic magnet is strong when we put on the rotor let it strive to be magnetized the kitten will be
jump out so just take it, but it won't work; the rotor jumps out, your springs now we'll go in
the springs push the brushes out and in short everything turns out randomly the company of the brushes is pulled out the springs are out all start
reassemble, therefore, when the spring is cocked, we press the brushes, and then you will need to put on an extension cord for the wrench here
and through take a look to put on the necessary ones with an extension cord we will press the rotor so that it does not pull out from us, but with these strong
magnets cocking the springs pushes until they click, especially look at the side closest to the rotor, it is better to recheck several times so that
it seemed so that the spring did not come out of the upper position until the end of the brush will not be pressed now we take
We put the extension cord so we put on these squares, but it is necessary to strongly restrict everything now to the light, here they are magnets he
magnetize contains on top we put on the stator is magnetized to our extension cord pressing like this
Russian forces are now putting on the stator, we need to press the stator to the very end as it should sit here, you can let go
nothing everything everything sits holding magnets if you pull a little it pops out magnets will start it there
pushing out this cover did not wipe it off did not grease everything I can let it go okay [music] the entire rack assembly
you can put in place [music] so in front of the alice birds will now serve for a long time and
happily if something is wrong, guys, you can give it once because he will read the comments so far.
Does the starter not turn the engine? Why does not the starter turn the reasons, the starter clicks but does not turn, repair the starter with your own hands.In what cases will the replacement of the starter brushes help, or we put the complete brush assembly on the starter. Let's consider the example of repairing a Honda Stream starter with our own hands.
All the answers to your questions in
Thanks for the real help
How to independently determine the malfunction of car systems and make repairs yourself. Suspension, steering, fuel system and ignition, lubrication and cooling system, brake, transmission and electrical equipment of your vehicle. How to make repairs with your own hands and with a simple tool, how to change oil and fluids, how to install repair kits and much more, not complicated, but interesting and useful in "Garage No. 6".
The starter does not turn. A common reason.
Eternal brake pads OWN HANDS
Which wheel bearing is buzzing. "Garage number 6"
Clicks, does not turn the starter Maxus LDV Maxus
Plumbers in shock. What can be made from a tee!
Opening used oil filters, found what kills motors
Who Has A LONG LANGUAGE? CHAMELEON CHALLENGE What Went Wrong? For children From Family Box
SLEEPLESSNESS // WHAT HAPPENS IF YOU ARE NOT SLEEPING FOR 4 DAYS
TV series Fitness. Season 1 Episode 2
How much does an item cost? A coat for 100,000 rubles and a grandson of a millionaire! Balenciaga! Gucci! Colored!
THE FUNNY VIDEO IN THE WORLD LAUGHED LOST MENTAL TEST CHALLENGE
10 stupid questions to the obstetrician-gynecologist
Chacha - Santa Barbara, Russia, America / vDud
800 MILLION YEARS GIRL HAS BEEN UNDER THE EARTH IN AN UNKNOWN LIQUID. THE DISCOVERY OF THE SARCOPHAGUS AMAZED EVERYONE!
MARIANA RO RELEASED A NEW SONG | MORGENSTERN SAID FAREWELL TO SUBSCRIBERS
Guys Try COSPLAY: Venom, The Witcher and Krang conquer the COMICCON
Hello! Toyota ist. In cold weather, at the first start, the solenoid relay is disconnected with a delay of 1, 2 seconds
If you give your number, I will call, there was another problem, there is no charging
Maybe I misunderstood. Which of the two is yours? You hold the key at the start, and the relay turns off by itself (after 1-2 seconds), slightly twisting the starter, preventing the engine from starting. Or, the bendix does not come out of the engagement for some time (1-2 seconds), after releasing the key
Went through and smeared. Maybe the coil itself?
Go over with flushing and lubrication.
Thank you, man, you are handsome. Take a video with the relay problem, how to identify, if not difficult
after last winter, my startel also began to emit such a sonorous noise at startup or after I immediately release the ignition key
Why was “CV joint” selected as a lubricant?
Designed for high mechanical stress in a wide temperature range.
Replace the starter from srv rd1 fits one to one even better
good afternoon. I have a honda civic 2003 7 the problem is that sometimes the starter turns but does not turn the engine. just idling the starter turns. What is the problem and how to solve it? HELLO FROM BAKU
If the starter motor works, but does not turn the engine, then the problem is in the bendix. It is on sale and it is not difficult to change.
The video is wonderful, everything is clear. During the first installation, there was a problem, the starter buzzes, but does not twist. I took it off, wanted to disassemble it, but saw that the starter gear was sunk into the depths. He moved it towards the engine, put it on - everything is fine, it starts. Maybe I did something wrong? If you can tell me
According to the tape thread on the shaft of this starter, the gear itself should engage without jamming when the shaft is rotated during start-up. On the removed starter, it should slide without effort. If the starter is with a traction relay, then the gear moves along the shaft with a fork.
+ Zhanybek Asanaliev The relay for interrupting the current to the starter is located in the unit under the dashboard. Contact between red and white wires.
And what is the name of the kit that was replaced, that is, what should I look for? Thank you.
Original number 04312-PSA-305
Thank you very much for your help, God bless you.
Come to me. Let's talk and do everything.
+ Ibragim Halimov Error p2413? Unscrew the sensor (12 thin key). Saw the ring and cut the halves. Clean it up. The stem should move easily and the resistor track should not be rustled. If anything, gently press the brushes to the track. Then you will put on the ring, it will fit well.
+ Ibragim Halimov On the EGR valve sensor, if the track is worn out, then there is no way to restore it.Check the smooth regulation of the track resistance.
Garage No. 6 how can the valve lift sensor be removed and repaired if there is a voltage?
+ Ibrahim Halimov Glad to help 🙂
Young people! Everything is intelligible and smart. There was exactly the same reason, thanks to your video, I got off with rather modest expenses. Thank you.
why change the rod? You didn't even break it when parsing it.
Garage No. 6, well, also the right to life) And you can also use the metal crank extension when putting on the stator, but for example the handle of a hammer, it is conveniently not magnetised and there is always
Was it necessary? A plastic part, in high temperature modes, with a disassembled starter, is available. And not to change?
He gets over within 5-9 minutes
Is there an article for a repair kit?
Garage number 6 brushes price 800r, went through greased twists perfectly. Thank you!
In the summer I washed the engine (maybe coincidentally, xs). The starter stopped turning: the turn would be done and everything, as if there was not enough strength. Then the problem went away (4 times it was like this, but it started later). Cold came, at -15 did not start. The new Akum put the same garbage, the turnover will do everything. I didn’t start. Can brushes too?
Garage # 6 solved the problem. The brushes on the plus are worn out. The price of a brush holder in Krasnoyarsk is 800 rubles. Thank you very much for the video!
+ Alexey Ilyushin Clean up and lubricate all the masses under the hood.
Can you please tell me I have a 1996 Honda Civic 1.4 on the move Clem disappeared corrected this matter and started clicking the starter what is the reason ??
You can now buy another starter, because you don't have to hammer on starters with fixed magnets, as these magnets crack just fine.
+ Vitya Pavlovich Shoot, disassemble and everything will be immediately visible. It is not difficult and not long.
Garage number 6 do not go away knocking)
+ Vitya Pavlovich Hit him with a hammer. If there are brushes, they will come closer to the rotor blades from vibration and the starter will come to life.
Garage number 6 when I turn it click with the ignition key, the retractor works but does not penetrate!
Akb has nothing to do with most likely wiring!
Can you please tell me my honda stream k20a starter silks but does not twist changed a new retractor serovno all the same brushes normal 3 starter contracted in sometimes 30-40 minutes it starts working again what could be the problem?
If the retractor relay clicks, but the starter does not turn, while the lamps on the dashboard go out, the culprit is the battery. After a while, it restores its capacity, but the current is enough to twist it once, although there is enough force to pull it in. Also check the wiring and contacts from the battery to the starter and ground.
Thank you, man. This is exactly the kind of breakdown that happened. Everything works perfectly.
Show me how to COLLECT in the (wilderness) of the brushes?
+ Alexey Losev Dolbanul on the starter, started and went to the store. Bought any and sit and grind to size. And if you find any brushes, then the soldering iron is definitely there.
on the Honda step RG body K 24 And the same starter? SECOND when you start it rumbles knocking what could be the problem
Garage No. 6 on k24 has the same starter design as on your stream. And the retractor is built in. With a remote control, it is certainly safer.
+ Roman Abdurahmanov Restore the pressure planes of contact pairs
to grind with a file is it like?
+ Roman Abdurahmanov On k24a starter with retraction. Here the contacts burned in it. Disassemble, file with a file and let it work further 🙂
On the d17a engine, the starter is a disease, therefore, a dear road. We throw out the native starter and set it from crv.
from the central control panel and from the step it is suitable, only the wires do not fit a little and you have to remove them from the fasteners
Arina28 Bogdanova He's with a retractor! fit?
Yes, I agree, its design is still that flight of thoughts. You can also have another one, if you have one. We have a town 50 kilometers from civilization, therefore, the repair option is always considered first of all 🙂
Often the starter bushing is loose and it drains the battery a lot. It is necessary to press in a new one.
Changing the screensaver to a short one was good!) And the video is clear, everything is simple and clear
Now about the retractor relay video is necessary. To generally appreciate the instructiveness of the video.It's not very clear to me why the author immediately decided that it was the starter that was faulty, and not the relay or something else.
+ Arkady Badareev If the starter does not show signs of life, then we check the relay and “something else” 🙂
Hello! Toyota ist. In cold weather, at the first start, the solenoid relay is disconnected with a delay of 1, 2 seconds
If you give your number, I will call, there was another problem, there is no charging
Maybe I misunderstood. Which of the two is yours? You hold the key at the start, and the relay turns off by itself (after 1-2 seconds), slightly twisting the starter, preventing the engine from starting. Or, the bendix does not come out of the engagement for some time (1-2 seconds), after releasing the key
Went through and smeared. Maybe the coil itself?
Go over with flushing and lubrication.
Thank you, man, you are handsome. Take a video with the relay problem, how to identify, if not difficult
after last winter, my startel also began to emit such a sonorous noise at startup or after I immediately release the ignition key
Why was “CV joint” selected as a lubricant?
Designed for high mechanical stress in a wide temperature range.
Replace the starter from srv rd1 fits one to one even better
good afternoon. I have a honda civic 2003 7 the problem is that sometimes the starter turns but does not turn the engine. just idling the starter turns. What is the problem and how to solve it? HELLO FROM BAKU
If the starter motor works, but does not turn the engine, then the problem is in the bendix. It is on sale and it is not difficult to change.
The video is wonderful, everything is clear. During the first installation, there was a problem, the starter buzzes, but does not twist. I took it off, wanted to disassemble it, but saw that the starter gear was sunk into the depths. He moved it towards the engine, put it on - everything is fine, it starts. Maybe I did something wrong? If you can tell me
According to the tape thread on the shaft of this starter, the gear itself should engage without jamming when the shaft is rotated during start-up. On the removed starter, it should slide without effort. If the starter is with a traction relay, then the gear moves along the shaft with a fork.
Does the starter not turn the engine? Why does not the starter turn the reasons, the starter clicks but does not turn, repair the starter with your own hands. In what cases will the replacement of the starter brushes help, or we put the complete brush assembly on the starter. Let's consider the example of repairing a Honda Stream starter with our own hands.
How to independently determine the malfunction of car systems and make repairs yourself. Suspension, steering, fuel system and ignition, lubrication and cooling system, brake, transmission and electrical equipment of your vehicle. How to make repairs with your own hands and with a simple tool, how to change oil and fluids, how to install repair kits and much more, not complicated, but interesting and useful in "Garage No. 6".
A car starter can be a surprise. An inoperative starter is a common problem when there is no starting. The video shows a common reason when the starter does not turn. Video author: Valery Chkalov. ________________________________________________________________ Visual and detailed recommendations for self-service maintenance and repair of cars. With an equipped place, a set of tools and hands, a car enthusiast can perform most of the maintenance operations on his car. Car repair is a certain order of not complicated operations. The channel contains technically competent service reviews from various authors. The channel is not planning commercial monetization. The main task of the collection is to promote the ARBIX trademark. ARBIX is an online car platform, a guide to car services. The site is a marketplace with simple and convenient mechanisms. The system offers advanced communication schemes and foresees the future of the automotive industry
Side sliding door does not open well. Regular maintenance of the rollers is required to avoid the need to replace the rollers or the entire sliding door drive.
When checking, no backlash is felt, how can you determine which wheel bearing to change. Which side is the wheel bearing humming and what does the wheel bearing hum look like.
Fuel system Honda.Where is the fuel pump and fuel filter for Honda Stream 4wd, Civic 1.7, and other similar systems. How to change the fuel filter on a Honda yourself.
This is not really a “how-to” because of bad camera angles and non specific pictures but, it might help. The reason we put a new starter in was because the old one was making a funny noise after the truck first started and sometimes while turning over as the engine was firing. I assumed it was probably the return spring to pull the small gear back in after releasing the key from start mode.
