Do-it-yourself candy washing machine repair tips control electronics

In detail: do-it-yourself candy washing machine repair tips control electronics from a real master for the site my.housecope.com.

Italian Candy washing machines are popular among consumers due to their good quality / price ratio. Despite the excellent performance and reliability, the cars sometimes break down. It always happens suddenly.

But do not be very upset, most of the breakdowns can be solved on your own. Experts from the Kandy service center are sure that many errors occur due to incorrect handling.

Experts from the Kandy service center are sure that many errors occur due to incorrect handling. By the way, I recommend contacting EuroBytService if you need a really high-quality and quick repair of a washing machine of this brand.

It is good if the machine is equipped with a self-diagnosis function. Then the built-in controller itself will determine what the malfunction is and will report it to the display with an alphanumeric code.

Common faults include:

The machine does not start.
There is water in the drum.
The water does not heat up.
There is no drainage of water or it is not collected at all.
An incomprehensible noise or strong vibration is heard during operation.
Failure of the electronic module. With this problem, the machine will not work, even if it is connected to the network, the programs are not configured, the indicators blink chaotically.

The sandy machine does not turn on

What should be done in this case?

Try unplugging and reinserting. Now you can try turning on the power button.
Didn't point 1 help? Maybe the socket is not working? Try plugging another electrical appliance into it.
The cause of a breakdown may be oxidation of contacts or burnout in the power button. You can check this with a tester. If a problem is identified, the part is changed to a new one.

The reason for the absence of warm or hot water during washing lies in a malfunction of the heating element. In this case, the self-diagnostic function will inform the user about the E05 error or blink the indicator 16 times after 5 seconds.

There are many reasons for the breakdown of the heating element. The most common is wear or a thick layer of scale on the heating element due to hard water.

How to check its performance and, if necessary, repair the candy washing machine with your own hands?

Video (click to play).

The back wall of the washing machine is removed.
The heater shank with two wires will be visible at the bottom.
Using a multimeter, you need to determine the resistance of the device. If it is 20-30 ohms, then it is in working order.
If the heating element is faulty, you need to get it. To do this, unscrew the bolt between the wires, and the part is pulled out of the machine. Teng can get stuck, then it is difficult to reach it without the help of a rubber mallet.
When installing a new heating element, the hole must first be descaled.
The operability of the heating element is checked by turning the machine into heating mode.

Another reason why the water may not heat up is the breakdown of the temperature sensor. In this case, the machine generates error 05 or 5 flashes.

Door malfunction

A breakdown of the hatch blocking device is indicated by the E01 code or the indicator blinks only 1 time. The reason may be

electronics, then it is advisable to use qualified help, or try to repair the door of the candy washing machine yourself.

To dismantle the lock, you will need to remove the hatch seal. To do this, use a screwdriver to pry on the clamp holding it.After removing the elastic, the two screws that secure the lock are unscrewed. The part changes and the machine is assembled in reverse order.

Drainage problem

In this case, the machine cannot drain the used water and displays the message E03 or flashes the indicators three times. What can be done?

Remove the front panel at the bottom.
Find the filter and substitute a low container, unscrew it counterclockwise.
Clean and rinse with water.
The filter is attached to the tank with a pipe. It also needs to be checked, since it is often clogged with various deposits. This can be done with a screwdriver. But, carefully without damaging the pipe.
Now turn on the machine to drain mode and see if the pump impeller turns. You will see it through the filter hole - this is a part with blades. Hair, threads, wool are often wound around the impeller. If it is spinning, the pump is working. If it rotates, but at the same time the pump hums strongly and the impeller itself is shaking, then the problem is in it and jamming occurs due to its looseness. Here you will have to change the pump. Access to the pump of the Kandy washing machine is open through the bottom or pallet, which can be easily removed.

The inlet hose also needs to be cleaned. To do this, it is detached and cleaned with a cable with a brush.

An inlet filter is installed on it, in which sand and rust are often found. The problem in this part is accompanied by the highlighted error E02 on the display or two flashes of the indicators.

The pressure switch located under the top cover may fail.

This sensor stops functioning if the tube attached to it becomes clogged.

After cleaning it from dirt, blow it. If you hear a click, then the device is in working order.

Bearing failure

If the bearings are broken or worn out, the machine emits a loud hum during operation. To get to them in the candy washing machine, you need to remove the top cover and pull out the tank. Kandy machines are compact, so the elements inside the equipment are located tightly to each other.

The algorithm of actions is as follows:

Hoses are connected to the tank, which must be all disconnected.
The powder receptacle is pulled out.
The counterweight is unscrewed.
The belt is removed from the drum pulley.
The wires are detached from the heating element.
The engine gets out along the guides. All wires coming from it are pre-disconnected.
The hatch is removed. For this, screws are unscrewed under the cuff, and the fixing clamp is pushed off with a screwdriver.
The tank is disassembled into 2 parts.
The pulley is removed from the drum shaft.
Light tapping knocks out the bearing. You can't hit the shaft! For these purposes, a wooden block is used.

Read also: DIY car ECU repair

11.The drum bearing is also knocked out.

New bearings are installed in place of old ones using a washer, nuts and a rod.

These instructions apply to machines with a split tank. Some models have one-piece tanks, then the process becomes much more complicated and it becomes problematic to replace bearings at home.

It is easier to repair the candy aquamatic washing machine, as it is equipped with a self-diagnosis system. To decipher the error code, you need to pay attention to the left indicator. After reading the instructions and finding out how many flashes are characteristic of a certain error code, you can repair the car with your own hands.

– Code 1 means the hatch is blocked. In this case, you need to check whether the hatch is tightly closed. This code also means there is a problem with the controller.

– Code 2 gives an error of water entering the tank - either it is not enough, or not at all. The reasons may be in the valve, controller, water tap, blockage.

– Code 3 characterizes problems with the drain. The pump, drain hose, or filter and siphon may have broken.

If there is water in the drum after the washing program, it first shuts off the water supply, the panel in the lower part of the case is removed and the water is drained using the drain pump filter. After that, you can understand the problem.The pump is being checked.

SMA made in Italy are popular among Russian consumers for the convenience of the management system and a large number of programs. They are small, not very expensive, but break more often than LG or BOSH. If you have skills in the device of household appliances, then you can try to repair Candy washing machines yourself.

Breakdowns can range from simple to complex ones that can lead to costly repairs. To determine the reasons for the failure, it is necessary to diagnose, which is quite possible to carry out on your own. Experienced craftsmen put the following faults in the first place:

Blockage or technical malfunction in the drain system. The machine stops draining water, stops after washing, without going to spin. If the tightness is broken, then a leak may occur during the wringing of things. A signal to a problem that has arisen may be a characteristic noise during the descent of water. It is usually audible if the pump is clogged.
Wear of the moving parts of the washing machine. Oil seals, engine, shock-absorbing elements, bearings - all this is under constant load. If any of the elements fails, vibration appears in the machine, especially during the spinning process. If you listen, you can distinguish light tapping or grinding in the drum.
Failure of the water heating element. This problem is typical for older models. The water stops heating up, or the machine doesn't wash at all.
Problems with electrical and electronics. The wiring and the points of its connection to the sensors cause the washing machine to stop working. In most cases, due to high humidity, oxidation appears on the terminals, but sometimes the wiring "burns". Voltage drops cause the failure of the sensors and the control module. The failure of the pressure switch is accompanied by problems with draining and drawing water, poor spinning indicates that the tachometer has broken.

To fix the problem with your own hands, careful preparation is necessary. You will need a spacious work area, tools and accessories.

Eliminate blockage and drain problems.

This breakdown can be easily repaired on its own. The problem, as a rule, manifests itself in those situations when the rules for operating the machine and caring for it are violated. Cleaning the drain begins with checking the filter. In Kandy, it is located on the lower left side, hidden by a small door or panel. To clean it, carefully unscrew it counterclockwise, pull it towards you. First, spread a rag on the floor to collect the flowing water. The removed filter is washed with water, cleaned of debris, and installed in place.

To clean the hose, pipe and pump, you will have to raise the washer or lay it on its side. The power supply is disconnected beforehand, the drain hose is disconnected from the sewer system. You will have to get to the pump in cars of this brand through the bottom, which is either not there, or there is a special pallet.

After loosening the clamps, it is necessary to disconnect the hose and branch pipe. The latter is washed with water, wiped dry. The hose is cleaned with a cable with a brush and inspected for damage. After that, the sensors are disconnected from the pump intended for draining the water, the fasteners are unscrewed. Having taken out the pump, it is necessary to check the impeller located under the cover. As a rule, hair, wool, villi are wound around it, so everything will have to be removed. It is recommended to replace the burnt out pump with a new one.

Now all that remains is to assemble the machine and test it in operation.

Such work is considered more serious. The difficulty in replacing bearings is that the sleeve that holds them is thermally pressed in, and the bearings themselves are difficult to remove. For repairs, you will have to disassemble the washer by removing the top cover and back panel.First, remove the detergent tray. Next, the front panel is detached. Now it is the turn of the tank, which is removed carefully so as not to damage the wiring and hoses that were previously disconnected.

The peculiarity is that you cannot cope with such work yourself - you will need an assistant. To remove the bearings, the tank will have to be disassembled, the pulley removed from the shaft, the shaft removed, and the two bearings will have to be removed. For such work, you will need a special removable device, but you can also use a regular hammer. Now it remains to install new bearings and assemble the machine. It will not be superfluous if you pre-lubricate the cleaned seats with grease.

Another problem is shock absorbers wear. Strong vibration during washing or wringing out things will remind you of this. These elements are located under the tank. Remember that shock absorbers are non-separable structures, so they will have to be completely replaced. To do this, first unscrew the lower, and then the upper mounts. Sometimes there are plastic latches that you just need to press down to pull out the locking pin. The removed old shock absorber is replaced with a new one. Image - DIY candy washing machine repair tips control electronics

Procedure for replacing the heating element.

Most often, this element fails during prolonged use of the machine. The reason is the hardness of the water, which is deposited on the heating element with a dense bloom. In case of such a failure, a special error code will be displayed on the screen. There is no need to worry here - the work is simple, it is quite possible to do it yourself. It should only be remembered that the heating element is located behind the rear panel, under the tank.

To replace it, it is necessary to carry out a number of operations:

remove the panel;
unscrew the bolt securing the failed water heating element;
disable all sensors, having previously memorized or marked their connection;
using a flat screwdriver, you can begin to remove the heating element by gently pulling it towards you;
using a multimeter, it is checked for operability;

a serviceable element is simply cleaned of scale, and a new analogue is acquired instead of a burned-out one;
we carry out the installation, connect the wiring and sensors, screw in the mounting bolt, install the back panel in its place.

Problems with electrical and electronics.

Electrical failure is another common problem, involving not only electrical wiring, but sensors as well. Most often, the tachometer and the pressure switch, which is responsible for the liquid level, fail. Checking the wiring for operability is a rather complicated process, which implies the presence of a multimeter and the ability to use it. Sometimes a visual inspection is sufficient to identify oxidized wires or terminals.

The water level gauge is easy to change. It is located in the upper corner, under the cover. The wiring leading from the pump and the electrical board is disconnected from it, the tube connecting the device to the tank is disconnected.

In place of the removed pressure switch, a new one is installed. But the tachometer needs to be changed by an experienced craftsman, because the washing machine will have to be disassembled to get to the electric motor.

If the surge protection is not installed, or there is no grounding, the control module may fail. The machine will stop turning on, programming will fail, the washing machine will freeze. The control board is quite expensive, so it is recommended to have it checked and repaired by an experienced technician. Most often, all work ends with a complete replacement.

It happens that the machine does not turn on during startup. There may be several reasons for this:

the network cable is burnt or kinked. It must be checked and, if necessary, replaced. It happens that the problem is hidden in the extension cord used, so it is recommended to start checking with it;
there is no voltage in the network.Also, it may simply not be enough to start the washing machine. To check, you will have to use any electrical device. If the "diagnosis" is confirmed, invite an electrician;
contacts on the start button have oxidized. Remove the top cover, remove the powder container, remove the panel, disconnect the wiring to the control module, inspect the contacts. They will either have to be protected or changed;
the management module has failed.

Noticing a puddle on the floor, it is recommended to urgently look for a leak. But before starting all the actions, the machine must be de-energized so as not to get an electric shock.

There may be several reasons for the leak:

the dispensing tray is clogged with detergents, clogging the branch pipe;
the water drain pipe is damaged;
from prolonged use, the cuff is worn out or damaged by small objects, having lost its tightness.

It is recommended to regularly clean the outside of the SMA Candy, without using products containing solvents, alcohols or abrasives. It is enough to use a damp cloth for such work.Check the detergent drawer regularly to remove any powder residues. If necessary, remove the container and rinse it thoroughly with water. Image - DIY candy washing machine repair tips control electronics

The drainage system should be checked and cleaned twice a year.

If the device is moved to another place and it has not been used for a long time, all water must be drained from the system.

Remember that all repair work must begin with the diagnosis of the washing machine in order to identify the malfunction as accurately as possible. Having estimated the complexity of the failure and your own strength, you can decide on an independent repair or call an experienced specialist. Working on your own without the necessary skills can lead to more costly repairs. But if you act on your own, then change the failed elements with their exact counterparts.

Due to the adequate ratio of quality and cost, Candy brand washing machines have found many fans among our consumers.But, as you know, there is no perfection in the world: wonderful Italian devices sometimes break down.Fortunately, most of the faults are repairable and it is quite possible that you yourself will cope with the problem after reading this article. So, Kandy is a washing machine: DIY repair.If the Kandy washing machine has a malfunction, you can try to do it yourself. Of all the many elements that make up the washing machine, probably only the frame and decorative trim cannot break. All others, with varying probability, may fail.

The machine cannot be turned on.

The water in the tank remains cold.

The hatch does not want to open.

Water is not collected well or is not drained.

There is increased vibration and unusual noise during machine operation.

The self-diagnosis function is of great help to the repairman.If something goes wrong, the built-in controller detects the fault itself and reports it in some way. If there is a display, such as in the ActivaSmart model, an alphanumeric code is displayed on it. Owners of machines without a display (Aquamatic model) can guess the nature of the malfunction by the number of flashes of the LED on the control panel.For repairs at an amateur level, you will need the simplest tools - keys, screwdrivers, pliers, etc.You can find out the condition of the electrical part using a multimeter and a phase indicator screwdriver.A special tool has to be used only when replacing bearings - they are pressed with an interference fit, so a puller will be needed.We strongly recommend that you take a photo of the wires connected to it before dismantling a unit, so that there are no connection problems during assembly.Well, now let's see how you can return this most useful device to working condition.In this regard, the repair manual contains the following recommendations:

Unplug the power cord from the socket, plug it in again and try to start the device again.

If the machine does not turn on again, check that the outlet is working with some other known working electrical appliance.

The most common reason for this failure is oxidation or burnout of the contacts on the power button. This element is checked using a special tester and, if necessary, replaced with a new one.

The reason for the "strike" may be a faulty control module (the indicator blinks 14, 15 or 18 times in a row). To repair or replace it, you need to contact a workshop. The reason that the washing machine began to treat its duties "with coolness" is, in most cases, a breakdown of the heating element (error code "E05" or the indicator flashes 16 times every 5 seconds).It can simply burn out from the development of a resource, like a light bulb, or it can "order to live a long time" prematurely - because of a thick layer of scale.The heater is manipulated in the following order: Image - DIY candy washing machine repair tips control electronics

Remove the back panel by unscrewing the corresponding screws.
Locate the heater shank protruding from the bottom of the tank (two wires are connected to it).
Determine the resistance of the heating element with a multimeter. If it is suitable, the device will show 20 - 30 Ohm, if it is burnt out - "infinity".
If the heating element is faulty, unscrew the nut holding it (between the contacts) and carefully remove it from the tank. If you get stuck, hit it gently a couple of times with a rubberized hammer (or with a regular one - on the attached wooden block).
Before installing a new heating element, the inner surface of the tank around the hole must be descaled.

To make sure that the heating element is working, it is enough to turn on the machine for heating and look at the electric meter - the speed of rotation of the disk or the frequency of blinking of the indicator should increase sharply.

A less common cause is the failure of the temperature sensor (E05 or 5 flashes). To check, first measure its resistance at room temperature, then after heating with hot water. In a non-working element, the resistance will remain constant.

Indesit washing machines have become widespread due to their affordable cost. The unit is of high quality, but any equipment is not immune from breakdowns. Washing machine Indesit - do-it-yourself malfunctions and repairs.

We will consider the main problems associated with connecting a washing machine here.

If there is not enough space in the bathroom, then the washing machine has to be installed in the kitchen. In this thread https://my.housecope.com/wp-content/uploads/ext/740/cancliz/mnogokvartirnyie-doma/santehnika/kak-podklyuchit-stiralnuyu-mashinku-na-kuhne.html you will find tips for connecting the device for beginners and experienced.

If the door lock device breaks down, the E01 error code is displayed or the indicator blinks 1 time. The reason for the failure lies in the electronics, so it is better to invite a specialist.

If its appearance is not expected in the near future, the lock can be opened by yourself. This will be possible if the front cover is removed from the de-energized machine and slightly tilted back.

It happens that the lock itself requires replacement. To dismantle it, you first need to carefully remove the hatch seal by prying the clamp holding it with a screwdriver. After that, two screws that secure the lock will become available.

If the machine cannot get rid of the waste water (error "E03" or 3 blinks), it is most likely a clogged filter. A pump breakdown could also have occurred. Do the following:

After removing the front lower panel, locate the drain filter on the left side of the machine.
Place a container under the machine, unscrew the filter and free it from accumulated dirt.
Also inspect the tank connection to which the filter is attached.It is often clogged with muddy deposits, which must be carefully removed with a screwdriver.
After plugging in the machine, start it in drain mode and look at the pump impeller (you can see it through the hole in the filter plug). If the pump is working properly, it will rotate. It happens that the impeller rotates, but the operation of the pump is accompanied by a strong hum, and when the impeller is swinging from side to side in the direction perpendicular to the axis (the machine, of course, must be turned off), you can feel that it has become very loose. In this case, the impeller can jam from time to time, which is the cause of the problems with the drain. Such a pump must be replaced, for which the rear wall will have to be removed.

It will also be helpful to clean the inlet filter, for which you need to disconnect the inlet hose. It is also often clogged with sand and rust, as a result of which water begins to flow into the machine very slowly (error "E02" or 2 blinks).

The reason for the lack of a normal drain can also be a malfunction of the level sensor, also called a pressure switch (located under the top cover). If the tube attached to it becomes clogged with dirt, the sensor will not function. After removing the dirt, you can check the performance of the pressure switch by blowing into the tube. A working device should respond with a click.

If the machine starts to work with a loud hum, it is most likely that one of the bearings needs to be replaced. To do this, you need to remove the tank, which is done through the top in Candy machines. In some models, the tank is one-piece and needs to be cut and welded to replace the bearings. This can only be done correctly in the workshop. At home, replacement of bearings is possible only for machines with a collecting tank. To get to it, you need to remove the panels - top and back.

It is also better to dismantle the front panel so as not to accidentally scratch it when removing the tank.

Before you get the tank, you need to do the following:

disconnect all the hoses connected to it (the clamps are unclenched with pliers);
remove the powder distribution hopper;
unscrew the counterweight;
remove the belt from the drum pulley;
disconnect the wires from the heating element;
unscrewing the bolts and disconnecting the wires, remove the engine (extends along the guides);
remove the hatch by unscrewing the screws under the sealing collar (the clamp fixing the collar is pushed off with a screwdriver).

Having disassembled the tank into two parts, the pulley is removed from the drum shaft, and then by careful knocking the shaft is knocked out of the bearing. You cannot hit directly on the shaft - you need to put a wooden block. Next, you need to knock the bearing out of the tank with careful uniform blows around the perimeter.

The new bearing is installed in place using a simple device consisting of a pressure washer, a threaded rod and a pair of nuts. One nut is screwed onto the rod from one side - it will press on the pressure washer pressing the bearing. The second nut is screwed onto the rod from the other side (abuts against the tank) - it must be rotated slowly.

In small apartments, tenants prefer to save as much time as possible on everything. Let's consider how to choose a compact washing machine under the bathroom sink and how to install it.

This information will help you decide on the choice of a kitchen faucet. Characteristics of devices by manufacturer, material and mechanics.

Washing machines from the Italian manufacturer Kandy have found their niche in the Russian market. These machines are distinguished by their small size and reasonable price. However, their quality is such that repair of Candy washing machines is carried out by masters much more often than Bosch or LG. What are the typical malfunctions, and is it possible to fix them with your own hands - this will be the further story.

Any washing machine can break down. The reasons may be different, banal or, on the contrary, too serious, which will lead to expensive equipment repairs.Professional diagnostics will help to determine exactly what is broken. But in most cases, such diagnostics can be carried out independently, the main thing is to listen well, take a closer look, and have tools at hand.

What goes wrong in Kandy typewriters most often? The wizards note the following malfunctions:

blockage of the drain system or its malfunction. If a blockage occurs, the machine does not drain the water and stops after the wash cycle, the laundry is not wrung out. If the tightness of the connection of the nozzles, hose or drain pump is broken, then water may leak during spinning. In addition, a characteristic hum during draining of water indicates a malfunction of the drain system, most often this is due to a blockage in the pump.
wear of the moving parts of the washing machine. Parts that are subjected to more stress during washing are subject to faster wear than those that do not. These elements include oil seals, bearings, shock absorbers, engine.

The average service life of bearings is about 7 years; they are replaced together with the replacement of the oil seals.

The malfunction of these parts manifests itself as follows: strong vibration of the machine during spinning, knocking or rattling of the drum even when the machine is not working, the drum stops, the machine does not start for washing after filling with water.

malfunction of the heating element. This breakdown often occurs with some Kandy washing machine models. It manifests itself in the fact that the machine either carries out the washing process in cold water, or does not start washing at all.

malfunction of electronics and electrics. Electrical wires and their connections with sensors can cause the machine to stop washing at some point. Most often, terminals are oxidized due to high humidity. But there are also wire burnouts due to high load. In case of power surges, the sensors and the control module of the machine may fail. This affects her work in different ways.Problems in draining and collecting water indicate a breakdown of the pressure switch, problems with spinning may indicate a tachometer.

A blockage in the drain system is a malfunction that can be easily eliminated by hand. In service centers, it belongs to the first category of complexity. A similar problem usually arises in cases where the rules for the operation and maintenance of the washing machine are not followed. Cleaning the drain system begins with cleaning the drain filter.

In Kandy machines, the drain filter is located at the bottom, on the left behind a small door or behind the bottom panel. To clean it, you need to carefully unscrew it counterclockwise and pull it towards you. Be sure to use a large cloth to prevent any remaining water in the tank from spilling out onto the floor. After removing the filter, rinse it in water and remove lint and other dirt, then slide it back into place.

To clean the hose, drain and pump, you need to lift the machine or lay it on its side. Before doing this, be sure to turn off the power supply, as well as the drain hose from the sewer. You can get to the pump in the Kandy machine through the bottom, which is either missing or there is a pallet. It can be easily unscrewed.

So, we loosen the clamps and disconnect the pipe and hose. We rinse the branch pipe in water and wipe it with a dry cloth. We clean the hose with a cable with a brush and inspect for damage. Next, we disconnect the sensors from the drain pump, unscrew the self-tapping screws holding the pump, and take it out. In the pump, you need to inspect the impeller, which is located under the cover.

Pile, hair, wool can be wound on it, so we clean everything carefully. Using a multimeter, we check its performance. If the pump has burnt out, then in this case it is better to replace it with a new one; repair in this case is not advisable.

After cleaning, we assemble the machine and run the wash in idle mode.

A malfunction in the moving parts of the washing machine is a major repair.Replacement of motor brushes, bearings, shock absorbers belongs to the third category of complexity. The difficulty in working with bearings lies in the fact that the sleeve on which they are fitted is thermally pressed, besides, the bearings themselves are not easy to get. But in general, the whole algorithm for replacing bearings in all machines is similar.

The silent operation of the washing machine is ensured by shock absorbers. And if one day you hear a roar, then, most likely, the problem is precisely in the shock absorbers, in rare cases in loose counterweights. It is not worth operating a machine with faulty shock absorbers, because this can lead to even more complex breakdowns. It is best to delegate their replacement to the master, but if you wish, if you have time and space to disassemble the machine, you can do this work yourself, step-by-step instructions that will allow you to do the work are in the article on replacing shock absorbers and dampers.

With prolonged use of the washing machine, the heating element breaks down. The reason may be hard water, which is deposited on the surface of the heating element in the form of a plaque.... In the event of a malfunction, an error code will appear on the display. The heating element is located behind the rear wall of the machine body under the tank. The algorithm for replacing the heating element is simple:

unscrew the back wall;
we unscrew the bolt holding the heating element;
we disconnect the sensors from the heating element, after taking a photo of their correct connection;
using a flat screwdriver, carefully pull out the heating element towards us;
we inspect it, if outwardly it is not possible to determine the serviceability, we take a multimeter and check its performance;
if the heating element is serviceable, then we clean it from scale, if not, we buy a new one;
insert the heating element into place;
we connect wires and sensors;
we fix the heating element with a bolt;
we put the back cover of the machine body.

Another of the typical breakdowns of a washing machine is an electrician, by which in this case we mean not only electrical wiring, but also sensors. The tachometer and pressure switch (water level sensor) fail more often. Checking that the wiring is working is a process that requires patience and skill in using a multimeter. In some cases, a visual inspection of the wires and terminals is enough to understand that they need to be stripped or replaced.

You can easily replace the water level sensor with your own hands. It is located under the top cover in the corner. It is necessary to disconnect the chips with the wires coming from the electronic board and the pump, and also disconnect the pipe coming from the tank. And in place of the faulty one, a new pressure switch is connected. It is better to entrust the replacement of the tachometer to a specialist, because you will have to disassemble the washing machine and get to the electric motor.

With poor protection against power surges and lack of grounding in the electrical network, the control module of the washing machine may fail. This can lead to the fact that the machine does not turn on, wash programs get lost, the machine "freezes". The control board is quite expensive, so it is best to entrust diagnostics and repairs to a master. In some cases, it is actually possible to repair, not replace.

There are amateurs who are easily versed in electronics, if you consider yourself one of those, then go for it. But remember, mistakes can be costly.

So, the repair of Candy washing machines should begin with a high-quality diagnosis, determination of the malfunction. Only after assessing the complexity of the work ahead and your capabilities, make a decision whether to do the repair yourself or it is better to entrust everything to the master. And there is nothing wrong with everyone doing their own thing.

Video (click to play).