Do-it-yourself washing machine repair

Many breakdowns in washing machines can be repaired by yourself. If an error code appears on the display, then some can be easily removed yourself. Stopping in the middle of washing, no draining water from the tank, when the washing machine does not heat up or rattles and rumbles at high speeds or does not rotate the drum at all - all these malfunctions during self-repair do not seem so difficult for those who know how to use a tool

Be patient and courageous, watch video tutorials on how you can fix Gorene washing machines yourself at home in case of various malfunctions.

A great incentive for you will be that when you, after watching the video, do any repairs with your own hands, not necessarily washing machines, but in general in everyday life, you save money. The savings in money are significant. For the work of a master, on average, you have to pay from 500 to 2000 rubles, depending on the complexity of the work. And here you buy only the necessary spare parts and do all the work yourself. But if something does not work out, call us, we will help you. Successful repairs!

Repair of Gorenje washing machines is distinguished by its specificity, thanks to the peculiarities of the assembly of equipment. Despite the high quality of components and compliance with many standards, Slovenian CMAs fail. Consider how to determine the problem, what breaks down more often and how to do it yourself yourself.

When starting a wash, the user rarely monitors the stages of the program - he threw in the laundry, filled in the powder, turned on the cycle and left. This is how things usually happen, so it's hard to spot problems in time. The SM self-diagnosis system comes to the aid of the user. Electronics “notices” the failure in time and notifies the owner of the washing machine by displaying error codes on the screen.

Video (click to play).

Consider the most common SM fault codes from the Goreniya trademark:

• F1 (F1) indicates a short circuit in the heater or an open circuit in the power supply of the part.
• F2 (F2) lights up when there is no water intake into the system.
• F31 (F31) indicates a malfunction in the operation of the tachogenerator of the electric motor (EM).
• F21 (F32) means the loss of communication between the electronic board and the ED.
• F4 (Ф4) lights up when the water is not heated.
• F41, F43 - errors confirming water overheating.
• F5 (F5) - water is not drained from the tank.

Read more about other alphanumeric combinations in a separate article dedicated to decoding CMA codes from the Gorenje brand.

You can reboot the system to confirm the error or rule out a one-time system failure. But don't get carried away with this method if the code reappears.

• Disconnect the power by removing the plug from the outlet.
• Leave the technician idle for 15-25 minutes.
• Turn on, run test mode.

If the code disappeared, it may have appeared by mistake. If it lights up again, then there is a problem. If there are no codes, but the operation of the equipment is broken, the manufacturer offers to conduct a simple service test at home.

To make the machine go into testing mode, follow the scheme:

• Turn the mode selector to the zero position.
• Press together the two outer buttons, holding them for a while.
• Rotate the selector one click in a clockwise direction.
• After 5 seconds, release the pressed keys.

The result of the operation should be flashing and extinguishing of all lamps on the user panel.

After the system has entered the test mode, check the serviceability of the components one by one, according to the instructions.

UBL (electronic door lock):

1. Open the hatch for 10 seconds.
2. Close the door.
3. If the operation is successful, all the lamps on the panel will light up. If wrong - code F2.

1. The controller will measure the resistance of the sensor for 2 seconds.
2. A successful test will result in the extinguishing of the lamps. Otherwise, F2 will be displayed.

Water intake into the compartments of the powder dispenser:

1. 5 seconds to test hot water.
2. 10 seconds for pre-wash (soak).
3. 10 seconds for the main wash.
4. Pre and main cycle until the tank is filled with water to the first level.
5. All is well - the lamps will flash. If defects are found, the display will light up F3.

Drum - Spin and Run:

1. The motor starts and turns in one direction for 15 seconds. After a 5-second pause, it rotates back, the heater turns on for a while.
2. Everything is OK - the indication will go out. Failure will be indicated by code F4 or F5.

1. The drum will rotate for half a minute in the range from 500 rpm to the maximum threshold (1200-1400 depending on the model).
2. If the spin is ok, the bulbs will remain as they were.

1. The pump will start for 10 seconds. After performing a test drain, the machine will lower the water level in the tank.
2. If all is well, all LEDs will light up. In case of breakdown - code F7.

Last spin with drain:

1. The pump is on, the drum rotates as during spinning, in the range from 100 revolutions to maximum.
2. The lamps go out if everything is OK. If the RPM has not reached the maximum mark, the F8 code will light up.

To end the service test, turn the program selector back to zero position again.

Knowing how to detect a malfunction, you can proceed to self-repair of the Gorene washing machine.

The unique Gorenje cars are distinguished by a variety of shapes and modifications. Units even with a water tank are produced under this brand! But despite the manufacturability, the technology also has weak points. Based on the statistical data obtained from service centers, the most common problems with the AGR of this brand can be identified:

• A quarter of calls to the masters are associated with a breakdown of the drain pump.

• This is followed by the heating element. Either it is not made well enough, or it does not withstand voltage surges, or poor quality water affects, but burnout of heaters is the scourge of all automatic washing machines, not only the Gorenie brand.

• "Bronze" goes to the drain pipe - leaks, drying out, blockages, all this blocks the normal operation of the drain system.

• Another problem of any machine equipped with a collector ED is brushes.

• Another problem specific to these automatic machines is the breakage of the handle on the door. We will not go deep into solving this problem, because disassembling the door, buying a new handle for the Gorenje machine and replacing it with our own hands will not be difficult even for an inexperienced user. An example of work:

The next part of the review we will devote to instructions for eliminating the listed malfunctions.

Pumps most often fail, most likely not due to a factory defect, but due to unfavorable operating conditions. The water in domestic water supply systems is far from the European quality standards for which imported household appliances are created. The admixtures of salts and heavy metals slowly but surely cause barely fixable damage to many SMA systems. And the compactness of the case, due to which all the parts are located close to each other, completes the bad deed: the parts wear out ahead of time. As a result, the pump needs to be replaced.

Have you decided to carry out the repair yourself in order to save money on the services of a master? You will need a clear scheme of work:

1. Disconnect the device from all communications - electricity, water supply and sewerage.
2. Take out the powder cuvette, drain the water and replace it.
3. Move the equipment so that there is more free space around.
4. Tilt the casing to one side, because you will have to get to the pump through the bottom.

1. If the cars of other brands are distinguished by an open bottom, then in our case the bottom is tightly screwed with a lid. It is easy to dismantle by unscrewing several fasteners.

1. There is a pump under the cover - next to it there is a large black drain pipe, so it is unrealistic to confuse the pump with another unit.

1. Checking the performance of an element is easy: you need a tester. Disconnect the wires from the pump, put the device in resistance measurement mode and measure the values. If they are in the region of 160 ohms or more, the pump is working properly. If the screen is blank, the pump is broken.
2. Remove the part by unscrewing the bolts holding it.

1. Go to the store with the old part to purchase a similar one.
2. Replace the old node, connect the wiring.
3. Screw on the bottom.

On a note! If you have already started checking the pump, at the same time inspect the pump filter. We wrote earlier about how to clean the filter in detail.

1. Start a test wash.

The Gorenje washing machine has another specific nozzle problem. The most vulnerable part of a seemingly durable part is in the double bend (knee). What causes deformations?

• Poor quality material.
• Factory defect resulting in cracking.
• A puncture by a foreign body that has entered the drain system - a sharp object forgotten in a pocket of clothing.
• The use of overly aggressive agents in the hope of cleaning systems from scale, blockages, etc. Sometimes the use of such compositions is advisable, but you need to remember that vinegar, citric acid and other reagents not only remove scale and mold, but also accelerate the wear of "delicate" parts ...

It is difficult to understand the first time that the problem lies in the pipe. If a leak has formed, it does not hurt to first check the drain hose and rubber cuff, and then proceed to disassemble the case. How to disassemble the case is written a little higher - they make their way to the nozzle in the same way as to the pump.

All that remains to be done is to remove the original and install the analogue. To pry off the nipple, release it from the clamps. Do not try to patch up the part - this is a temporary measure and the leakage will resume as soon as the result of your efforts wears off.

Important! Ensure a secure fit when installing a new part. Tighten the clamps tightly, but do not overdo it so as not to damage the new tube.

Heater breakdowns are typical for any car - from budget Ariston and Indesit to premium CMA Miele or AEG. The Gorenje brand is no exception. But the reasons for the combustion of an element do not lie in the brand, but lie on the surface:

• Plaque from impurities in tap water is deposited on the tubular element, leading to overheating and burnout of the unit.
• Frequent interruptions of the wash cycle and system reboots.
• Permanent high temperature wash.
• Power surges.

If the water stops heating, you need to check the heating element and, if necessary, replace it with a new one. Before work, prepare the equipment - disconnect it from communications and put it in a place convenient for repair, with its back facing you. You will see a service hatch - remove its cover by unscrewing the screws.

The heating element is already visible, but it is inconvenient to get to it - the drive belt interferes. Remove it by removing the strap from the pulley.

Now the work is carried out according to the scheme:

1. Remove the wires from the heater contacts.
2. Take pictures or tag the wiring to avoid mistakes when reassembling.

1. Use a tester to measure the resistance by setting the minimum values ​​on the device. The probes must touch the two extreme contacts. The work item will display numbers in the 10-30 ohm range. A faulty heating element will display a unit on the ohmmeter display.

On a note! If the check shows that the heater is working, check the wiring and temperature sensor.

• Unscrew the large nut from the bolt holding the TEN in the hole.
• Press the fastener inward and forcefully (but gently) pull the part, loosening it to the sides. Can't? Use WD-40 fluid or equivalent.
• After taking out the assembly, remove the debris (scale) from the mounting hole with your hands.
• It's time to install a new part - install it in the groove, making sure it fits tightly.

• Screw on the mount.
• Replace the wiring, drive belt.
• Close the service hatch, screw in the screws.
• Run test mode with hot water.

Another "popular" breakdown is the erasure of graphite brushes. You can identify the problem by noticing a drop in motor power - this slows down the rotation of the drum. In addition, the technique may smell, and a crackling sound is additionally heard. An F4 error will also indicate brushes.

1. Open the hatch behind the car - the motor is located directly under the tank.

1. Remove the belt.
2. Unscrew the ED fasteners.

1. Now take out the powder receptacle, drain the water and reinstall it.
2. Lay the equipment on one side, twist the bottom.
3. Disconnect the wires from the motor.
4. Remove ED.

1. Find the brushes and inspect for wear. Old brushes are substantially worn out and give off an unpleasant odor.

1. Install new brushes, put the motor back in place, reconnect the wiring. Screw on the bottom cover.

Important! Seat the motor firmly - incorrect installation will cause other problems.

1. Place the SMA in a vertical position, bypassing the body, from the back, through the hatch, screw the motor.
2. Install the belt, close the hatch.
3. Connect the CM to the water supply and other communications, check the operation of the machine.

Other repair work is clearly demonstrated in the video:

Pay attention to malfunctions in the operation of the MCA in a timely manner, carry out preventive maintenance and care, and the automatic machine will thank you with a long and trouble-free operation.

Washing appliances Combustion (Gorenje) are known for their impeccable quality and functionality. However, even such reliable devices can sometimes break. Diagnostics of the washing machine will help to find out the cause of the malfunction. Most often, there is no need to purchase a new device, but it is enough to fix the equipment with your own hands or contact a specialist. Let's get acquainted with the main symptoms of malfunctions and figure out how the Burning brand washing machine itself informs users of a malfunction that has arisen.

Improper use or installation, wear of parts and the use of unsuitable detergents will damage the washing unit. Let's get acquainted with the most obvious types of malfunctions that disrupt the usual course of washing the Gorenie machine:

Careless handling of the washing machine can lead to mechanical damage, which does not always affect its performance. However, if you do not take measures to eliminate them, they can get worse and cause a lot of trouble.

If a crack has formed in the glass of the hatch, the door handle is damaged, or the body is deformed from a dent, you must invite a master to fix the problem.

Knowing the main symptoms of malfunctions will help to take timely measures to eliminate them. WITHthere are special washing machine error codes Gorenje, with which the device informs to the user about the occurrence of this or that error. Understanding the meanings of the code used for the notification will make the task easier:

• F1... You will see such a designation if a short circuit or power failure occurs.
• F2... The hatch must be tightly closed. If it remained ajar or the control contact did not work when closing, then such a code will inform you about this.
• F3... This value indicates a very small amount of water in the tank, that is, even the first water level was not reached during filling.
• F4... The value indicates the absence of signals from the drive motor or the impossibility of controlling its power.
• F5... This signal signals a break in communication between the controller and the inverter.
• F6... Informs about insufficient water heating for a specified period of time, the temperature level is below the set one.
• F7... You will see this code if, when switching to drain mode, the water in the tank does not drop to the first level.
• F8... Indicates that the rotation of the drum is too weak in the spin mode.
• F9. Indicates that water has accumulated in the sump.

Based on the information obtained from the codes, you can determine the method for solving the problem: is it possible to fix the problem on your own or you need to contact for service.

It is in our power to prevent misuse of the washing machine and thus avoid service costs. It is enough to adhere to the basic rules. Let's consider the most significant of them:

1. In the process of washing, use only high-quality detergents.
2. Keep track of the volume of things loaded into the drum, do not overload it.
3. Use the equipment only in rooms with low humidity.
4. Monitor and prevent foreign objects from entering the drum when washing.

The Gorenje washing machine has one convenient feature. She is able to exercise independent control over the performance of a large number of functions during the washing process.

If any malfunction is detected, the unit reports an error, accompanying it with an appropriate sound signal. Thus, the breakdown can be identified by the code and timely proceed to its elimination.