Do-it-yourself repair of a washing machine indesit wisn 101

In detail: do-it-yourself repair of the indesit wisn 101 washing machine from a real master for the site my.housecope.com.

The repair of Indesit washing machines differs from the repair of other brands of washing machines due to the design features. Manufacturers, in the race for customer gratitude, equip the MCA with more and more new systems, sensors, and functions. All this, of course, is useful for the user, but sometimes it significantly complicates the repair.

Fortunately, the device of the Indesit washing machine does not imply any special technical delights, and there are even a number of typical breakdowns for machines of this brand.

In this article, we will look at how to repair an Indesit washing machine with your own hands.

Repair of Indesit washing machines is a common thing for employees of workshops and service centers. Experts say that Indesit washing machines are not the most reliable, they have many vulnerable nodes that you need to pay attention to first of all if the CMA does not work.

We used the statistics of the world's leading service centers to come to a simple conclusion: Indesit washing machines are leading among the most broken brands. For the first 5 years of use, every third Indesit machine requires repair, unlike German or Korean-made equipment.

What is the reason for this? In 8 out of 10 cases, the owners of SM Indesit contact service centers with the following breakdowns:

Important! We deliberately did not pay your attention to factors such as blockages in the drain and filling system (hoses, filters and nozzles). The fact is that these problems are not only a problem of SM Indesit, but also of any other brands.

In search of answers to the question: how to fix the Indesit washing machine, you can refer to the instruction manual. If you have lost the manual, we will present you with a detailed algorithm for finding a breakdown and its causes.

Video (click to play).

Proceed as follows:

Attention! Before disassembling the SMA case, you need to study the device of the washing machine. The electrical diagram of the Indesit washing machine will help you with this.

If you didn’t find it, sketch, write down, photograph or film all the stages of disassembly on a video camera in order to put everything back together correctly.

Next, we will talk about repairing the Indesit washing machine with our own hands. We will give tips with photos and videos, step by step we will consider all the work that you can do without the help of a wizard.

It does not take much effort to find breakdowns associated with a burned-out heater. Heater problems can be identified by a number of signs:

In the overwhelming majority of cases, the Indesit machine itself informs the owner about the breakdown of the heating element. Error F07 is displayed on the screen, or 1st, 2nd and 3rd LEDs are blinking.
Indirect signs will also indicate its breakdown. So, the powder may not dissolve during washing, because the water is not heated.
After 20 minutes after starting the program, touch the hatch: if it is cold, then the heating element does not work.

To find, check and extract the heating element, proceed as follows:

Take a suitable screwdriver and unscrew the back panel, which is usually secured with four screws.
From the bottom of the tank, you will see 2 contacts sticking out of its wall. This is the shank of the heater - the heating element itself is located under the drum. Remove the wiring from the heater and sensor (located inside the heater).
Take a tester and take measurements - lean the probes against the contacts. If the device shows a value in the region of 20-40 ohms, then the heater is in order. If the value is 0, then the heating element is closed, and 1 or ∞ indicates a break in the heater.
At the same time, check if the heating element does not pierce the body. To do this, turn on the buzzer mode on the tester. Attach the probes as follows: one to the contact, the second to the body.If everything is in order, then the tester works quietly, if there is a breakdown, it will beep.
Next, remove the old heating element, even if the tester's readings are normal. To do this, unscrew the central fastener by unscrewing the nut. Take out the seal.
Examine the heating element. If there is a thick layer of scale or dark spots on it, then 100% of the element needs to be replaced.

Important! Buy a new heating element together with an elastic band-seal in order to tightly install and fix the heater.

Before installing the heating element, clean the place where it is attached from scale and debris. If it is difficult to do this with your hands, use a wire hook or bottle brush.
Install a new heating element, connect the wires and assemble the machine.

Malfunctions of Indesit washing machines and their elimination are a problem for many users, especially due to a factory defect. But if the filter is not defective, then it was "finished off" by unfavorable operating conditions - high humidity in the room or constant voltage surges in the network.

While the company "Indesit" is thinking how to protect the filter from unstable voltage in our homes, we will tell you how to carry out repairs yourself. Follow this scheme:

Remove the top cover by unscrewing the screws that secure it.
The filter is located on the back of the power cord, like a plug - only inside the machine.
Once you find the filter, unscrew the screw that holds it.
The part cannot be repaired. It is necessary to replace the element by purchasing the original part.

The owner of SM Indesit came to the workshop, already desperate to change anything: in his words, he changed the filter 3 times already. His working capacity was enough for 5 months at most. The foreman examined the machine and said that the filter was burning out due to high humidity. He installed a new part, and treated the contacts leading to it with silicone sealant. The lucky owner has been using the machine for the second year.

Important! If you decide to follow this experience, dry, clean and wipe before pouring sealant on the contacts.

There are jobs that require effort, time, tools, and most importantly - experience and knowledge. But we cannot but talk about them: a failure in the controller and wear of bearings are also possible malfunctions of the Indesit washing machine.

The most difficult job is with bearings. The difficulty lies not so much in disassembling the case, but in the tank. The manufacturers have made the tank as reliable as possible, so it is designed in such a way that it cannot be disassembled.

Therefore, the masters of the service centers got the hang of this issue, and they simply saw the tank into 2 parts along the weld. The solution is efficient - it helps and saves finances, since it is cheaper to cut a tank than to change half a car.

Of course, not all home craftsmen can handle such work, but you can try. Arm yourself with tips from the video:

As for the control unit, in 9 out of 10 cases it is enough to simply re-solder the contacts.

The scheme of the Indesit washing machine is such that the contacts are located in unfavorable places and are exposed to moisture. Due to condensation, they oxidize, close, and the control unit refuses to work.

Theoretically, it is easy to repair the control unit, but in practice it takes a long time and tediously, armed with a tester, to check in turn all the elements of the board and contacts. Only there it is possible to find and localize the breakdown.

It is better to entrust the repair of this part to a good master, and you will handle the rest yourself.

The popularity of the tyralny machines Indesit received due to the low cost. But for the initial cheapness you have to pay extra with repairs - the reliability of the brand is in question.

But you can repair the Indesit washing machine with your own hands and eliminate many breakdowns if you have basic knowledge of mechanics, electrical and electronics.

First of all, you need to determine what kind of breakdown occurred. Initial diagnostics will help you decide if it is possible to fix the problem yourself or if you still have to spend money on professional repairs.

The right step would be to have a preliminary acquaintance with the scheme of the washing machine in order to have an idea of where everything is.

Sometimes, to determine the cause of the failure of household appliances, it is enough to read the instructions for use, which, among other things, contains recommendations for eliminating breakdowns.

The first step is to take a look at the display. If it is impossible to complete the specified process, the washing machine issues special codes on the display.

Error codes in the operation of the washer are given in the instructions that the manufacturer must attach to his own product:

With the help of a very useful multimeter device, it is possible to check various contacts, wiring, sensors. The device will show if there is power everywhere.

Sometimes it is enough to listen to the sound emitted by the unit. When the washing machine starts to creak, make excessive noise, and sometimes rattle, then, most likely, there are problems in the bearings or the drum, the oil seal is damaged, the counterweight fasteners are loose, the shock absorbers are in poor condition.

Calling the wizard is the only correct solution when:

the warranty period has not expired - if the operating rules are followed, the repair will be free;
threatening smoke came from the car.

In other cases, there are said to be options. But always the first stage of repair begins with disconnecting the faulty equipment from the mains. For negligence, electricity will punish necessarily and severely. An indispensable rule of a home master: do not act at random, use the instructions.

When the display does not report a malfunction, there are no leaks, smoke, burning smell, then usually the problem is easy to fix:

If home laundry won't turn on, first you need to check if the plug is firmly inserted into the outlet. Occasionally, the washing machine can shut down due to power surges. It is also necessary to make sure that the operating mode is set correctly on the control panel;
When water does not flow into the tank, it is recommended to press the button responsible for starting and stopping the unit again, make sure that the door is closed tightly. Sometimes the fault is insufficient pressure in the water supply system, perhaps the tap was simply turned off, the hose was damaged. The reason may lie in the failure of both the program and the control system. Elimination occurs by repeated access to the "Start / Pause" button;
When the drain is not working first you need to check the filter - sometimes it is enough just to clean it.

And the source of the frightening rumble can be any object (for example, a coin) that accidentally ends up in the drum.

This is a fairly frequent breakdown, although the declared service life of the heating element is 10-15 years. However, numerous washes in very hot and hard water, constant overloading of the tank, and low-grade detergents do an evil deed.

Over time, a kind of "coat" of various salts is formed on the heating element. It breaks down from overheating, it is no longer possible to restore it. A heater malfunction is indicated by a cold hatch when the washing mode is on and, of course, laundry that has not been washed in cold water.

Replacing a damaged part is quite simple: the manufacturers have placed the heating element so that it is easy to get to it by opening the back cover of the case. The only inconvenience is that the car needs to be disconnected from all communications in order to turn the right side for repair. The heating element is placed under the drum pulley. Care should be taken when disconnecting and replacing the wiring board.

A minimum of tools will be required: a flat and curly screwdriver, a key with a head are enough. You will also need a multimeter or tester to check the heating element. It is wiser to buy a new heater, the original Italian one.

Disconnect the unit from all communications.
Unscrew the bolts around the perimeter of the cover.
Next, under the tank, you need to find the contacts of the heating element and attach the multimeter probes to them. Normal resistance is 25-35 Ohm, other indicators indicate a malfunction.
The next operation: disconnecting all wires with terminals, fixing their position in memory.
Then the nut is unscrewed on the bolt, the end of which is located in the center of the heater base.
In order for the bolt to go into the hole, it should be gently knocked over it.
Pull out the heating element base by picking it up with a flat screwdriver.
Move the thermal sensor from the damaged part to the new heating element.
Clean out the formed debris from the seat for the electric heater.
Leave the new heating element in its intended place, fasten it with a bolt.

Then it remains to return the wires to their original position, close the rear cover of the machine and restore the connection with communications.

This is also a fairly common problem. The pump is a weak point of automatic washing machines. In addition to a blockage, when it is enough to clean the hose and filter, the impeller can jam. It is located behind the drain filter, which must be unscrewed and removed.

To prevent the impeller, you need to try to rotate. It should not be too light: in the normal state, the impeller rotates with certain delays due to the magnet in the coil. Sometimes threads, hair, laces and other similar debris wrap around the impeller so that they even block it. All these interferences must be removed.

It happens that the plastic body is deformed and begins to clamp the blades. When there is no possibility of replacement, the blades must be cut with a knife by no more than 2 mm, and the washing machine can still be used.

If after that the work is not restored, then the breakdown is more significant and requires a detailed inspection - the pump will have to be disassembled. The machine is laid on its side, the screws that fix the pump to the body are unscrewed, the electric cable and 2 hoses are disconnected.

Clean the hoses if necessary. The tester checks the motor windings to eliminate the possibility of breakage. Typical resistance values here are 150-300 ohms.

Without hoping for memory, it is worth noting the orientation of the pump relative to the engine I. Then the pump motor is disconnected from the housing, the rotor is removed from the stator. Often everything inside is clogged with dirt that interferes with the rotation of the rotor. In such cases, a thorough rinsing is required.

The rotor axis bearing is lubricated with lithium, the oil seal is adjusted. Subsequent assembly is carried out using a sealant to prevent leaks.

If you follow the instructions for caring for your washing machine and clean the drain hose every 6 months, the likelihood of breakage of the drain system will be greatly reduced.

Indesit's motor is well-designed, reliable and durable. However, nothing is eternal, and at one not very beautiful moment, the "heart of the machine" may fail. The reason can be not only wear of the mechanism, but also excessive overload.

First, the outer panels are removed from the machine, usually the top and rear.
O Disconnect the supply wires.
Remove the belt from the pulley.
Screw the fasteners, remove the motor.

After diagnostics, the final decision is made to repair or replace the engine. Usually they tend to the latter option - it is difficult to restore the engine, it is easier to completely replace it. The installation of a new engine is carried out in the reverse order.

Before disassembly, the assembly should be photographed, then there will be no problems with what to screw where.

When in a working washing machine, especially during spinning, unusual sounds appear, and not episodic, but gradually increasing, this is a clear signal of a malfunction of the bearings, which indicates the ease of rotation of the drum.

Do-it-yourself repair in such a situation is possible, but you cannot call it simple - you need extreme care, strict adherence to the sequence of operations:

Remove the top and rear panels.
Remove dispenser, control unit.
Twist the cuff clamp, remove the cuff itself and the hatch locking device.
Remove the front wall and counterweight.
Remove the tubular electric heater, noting the sequence of connecting the wires in memory.
Disconnect the parts connected to the drum tank, dismantle the drive belt and motor.
Remove the tank, place it on a flat place with the pulley up, then unscrew the pulley bolt, remove the pulley itself.
Using a mallet (you can use a simple hammer and a wooden gasket) to sink the shaft down, untwist and divide the tank into two halves.
Remove the bearing with a special puller, dismantle the old oil seals.
After installing fresh oil seals, press in a new bearing.

The assembly of the washing machine is carried out in reverse order with strict sequence of operations. To prevent the tank from leaking, all seams must be sealed.

The main thing when replacing a bearing is care and adherence to the sequence of operations.

A flabby hatch lock can cause another nuisance - the washing machine will stop turning on. The shut-off device is also equipped with contacts, and when something prevents complete closure, electricity does not flow to the units of the unit.

Failure is usually caused by the accumulated dirt in the lock. After its elimination, the normal operation of the device, as a rule, is restored.

And the mortiser s dampens excessive vibrations that appear in the washing machine. This is especially necessary during spinning, when the rotating drum is at the highest speed. Over time, they diminish in effectiveness.

As a result - excessive vibration, atypical noises, knocking during the spin cycle. A common cause of failure is the wear of the gaskets and separating the piston and cylinder, which subsequently deform.

The shock absorber cylinder contains a rod, consisting of a rod and a gasket treated with a high-friction lubricant. Oscillations are damped by moving the piston.

The jerky jerk of the tank forces the piston into the cylinder, reducing vibration. There is also a spring in the cylinder that returns the piston to its original position - it is called the return one.

To get to the shock absorbers, you will have to remove the rear panel (in some modifications, the side or front cover can be removed). After unscrewing the nut at the bottom of the shock absorber, it is disconnected from the body. In the same way, the part is released from above. A new shock absorber is installed in place of the old one and fixed in the reverse order.

In the latest models, instead of shock absorbers, dampers are used, where the return spring has been replaced by a whole spring system attached to the upper area of the tank and providing it with a "suspended" position. This design is more reliable, better dampens unwanted shocks.

To check the performance, the damper must be removed from the case by unscrewing the bolt in its lower segment, and try to press on it so as to compress and then unclench the mechanism. If the result is minimal, the device is in normal working condition. When the piston easily changes position, the damper needs to be replaced.

It is removed from the case in the same way as conventional shock absorbers, although in some models the mounting bolts are replaced with plastic pins with latches. Install the new damper in the usual way - in reverse order with respect to the assembly.

It happens that the detergent does not want to leave the tray. This usually happens when he is poured there without measure. The problem disappears with the correct dosage.

Weak water pressure can also be to blame. It is worth trying to clean the filter where the washing machine connects to the inlet hose.

Another option is to increase the pressure at the tap supplying water. Sometimes water cannot enter the tray due to a blocked valve. Then you should pull out the tray, find the valve in the form of a key and carefully clean it.

These are the most common causes of improper detergent powder behavior and can be easily dealt with without the help of a professional. A more difficult case would be a problem with the water inlet valve where the powder does not leave the tray at all. Valve replacement is already required. The same can be said about the solenoid valve, which is responsible for filling the cuvette with water with water.

The control unit in Indesit washing machines does not have reliable protection against moisture, as a result, the condensate gets on the contacts, short circuits occur, removing the device from the working state.

Repair requires subtle diagnostics in the "Autotest" mode, serious knowledge in radio engineering, masterly possession of a soldering iron, skills in handling microcircuits, boards, semiconductors. This is usually the area of expertise of skilled professionals.

For the rare daredevils from the army of home crafts, the most general tips:

remove the cover from the control unit;
remove the module;
inspect faulty contacts and connections;
evaporate damaged parts;
solder conditioning elements in their place.

But work with electronics is far from being for everyone, so we recommend that you abandon experiments and turn to professionals.

You can get acquainted with the practical application of tips for repair and replacement of spare parts by watching informative videos.

Quick replacement of heating elements in the Indesit washing machine:

How to change the bearing yourself:

Washing machines Indesit, like any other brands, have their own design features. These features, on the one hand, give many models advantages over competitors, on the other hand, they are the reason for the occurrence of typical breakdowns that consumers have to face. Within the framework of the article, we will investigate typical malfunctions of Indesit washing machines and consider the possibilities of eliminating them with our own hands.

The vast majority of models of automatic washing machines of the Indesit brand cannot be called ultra-reliable. Leading service centers in the world provided information on the basis of which it was possible to prepare statistics on the number of people who have accessed the breakdown of washing machines. Based on the data presented in the graph below, we can conclude - toy cars Indesit are the most frequently broken brands... They end up in service centers in the first five years of operation more often than German and Korean equipment.

Why is this happening? What are the most common causes of a malfunction? Based on the same statistical data, we managed to significantly narrow the range of searches and identify a number of the most common causes of breakdowns of any models of Indesit washing machines. These malfunctions occur in 78% of cases of contacting service centers. What is the most common breakdown?

Note! We deliberately did not include dirty filters, hoses, etc., among the most common breakdowns, these problems are typical for all washing machines, not only the Indesit brand.

Before starting to repair the washing machine with your own hands, you need to find out the cause of the malfunction. An independent search for a breakdown in the Indesit washing machine must be carried out according to a clear plan. Only in this case can one count on success with a more or less high degree of probability. You act in stages.

If your washing machine has a display, pay attention to the error codes that pop up on it. The washing machine is designed so that in most cases it can diagnose the problem itself.Decipher the error codes of your Indesit and draw conclusions.
If there is no display or the machine does not give an error code, take a closer look and listen to the device. In particular, if the bearings are faulty, the Indesit washing machine will be very noisy, especially when the drum is rotating at high speed.
If there are no external signs of breakage, you will have to climb inside. The easiest way is to remove the surge protector, and the harder to get to the bearings.
Take a multimeter and ring all contacts, wiring and sensors for no power. Visually inspect all internal units, the breakdown will certainly give itself out.

Important! Before disassembling the Indesit washing machine, study its structure and the layout of the fasteners. To be sure, photograph or video each stage of the disassembly so as not to forget anything.

Problems with the contacts of the surge protector arise due to high humidity. Unfortunately, the manufacturer has not yet solved the problem of their protection, therefore, surge protectors often fail not because of a voltage surge, but because of banal condensation. Finding a surge protector for the Indesit washing machine is easy. It is located on the opposite end of the power cord from the outlet. You can dismantle it by removing the top cover of the washing machine and unscrewing one screw holding the device.

The surge protector cannot be repaired; you will have to change it. And this is not a problem, you can go, buy a new one, put it in and start the machine. But the trouble is, no one can guarantee that this new surge protector will work for a long time. Let's take a real life example. The desperate owner of the Indesit washing machine contacted our service center and said that he changed the power filter on his own three times, but after 4-5 months it burned, and we had to put a new one back.

Checking the power supply, network wire and contacts did not give any results - everything turned out to be normal. The technician, suggesting that the problem is high humidity, installed a new surge protector, and filled its contacts with silicone sealant, doing the same with all other suspicious contacts. As a result, the machine has been working properly for 1.5 years now - the problem has been resolved.

Note! Before applying the sealant, dry the contacts, clean them and wipe them with a dry cloth, and then cover with a waterproofing layer.

You can talk about a serious problem if the capacitor on the machine's engine is on fire. It is better to eliminate this problem with the help of a professional wizard, because only he can competently "diagnose" and correct such an error. As this problem can easily be confused with a malfunction of the electric motor.

Unlike the problem with the engine sensor, the malfunction of the heating element can be easily detected and fixed with your own hands.

In the vast majority of cases, the machine itself warns of a failed heating element, issuing an error codeF07.
If this does not happen, then it can be understood that the heating element does not heat by indirect signs: the powder does not dissolve, the laundry does not wash well, the hatch of the washing machine is very cold.
Having decided on the problem, we take a screwdriver and remove the back wall of the washing machine. In the lower part of the tank of the Indesit machine, we find two contacts sticking out of its wall - this is the heating element. We check the voltage with a multimeter. We unscrew the fastener in the middle, take out the sealing gum, take out the heating element.
If the heating element is covered with a thick layer of scale and has dark burning spots on it, it should be thrown away - the heating element is faulty. We'll have to buy and install a new one. Installation and assembly is carried out upside-down.

Bearing repairs are the hardest to carry out. The main problem is not even disassembling the washing machine, but disassembling the tank itself, because the manufacturer made sure that this unit is an integral structure and cannot be repaired.But, as they say, "the need for invention is cunning", the craftsmen solved this problem by simply sawing the tank in half along the weld. This is a unique and very correct solution, it allows, on the one hand, to get to the faulty elements inside the tank, and on the other hand, save a lot of money.

You can replace the bearings of the Indesit washing machine using the information provided on our website. We note right away that it is quite difficult to do this with your own hands without a suitable tool and proper skill. But if you try, you will succeed.

Repair of the control unit of the Indesit washing machine in 90% of cases comes down to replacing the contacts. The control unit in machines of this brand is not well protected from moisture, which leads to the ingress of condensation on the contacts. The contacts naturally close, and the control unit fails. In theory, it is not difficult to repair the unit, in practice you have to work pretty hard with a multimeter, ringing all the contacts in turn, and even not once before you can detect a malfunction.

Defective contacts should be replaced immediately. Cleaning in this case is not acceptable. After replacing the contacts, it is best to fill with sealant.

Summing up, we note that it is possible to repair an Indesit washing machine with your own hands in most cases, but not in all. Therefore, in order to avoid even more serious breakdowns, contact the master, especially if you do not have basic skills in repairing household appliances and are not confident in your abilities. After all, everyone should mind their own business!

Washing machines of the Indesit brand, due to their affordable cost, have become very widespread.But for a low cost you have to pay with the same low reliability - now one or the other element fails from time to time.The owner of the device can easily fix some of the breakdowns on his own. All you need is to complete the short training course outlined in this article. So, the Indesit washing machine - malfunctions: DIY repair.So, we will consider the main breakdowns of the Indesit washing machine and do it yourself repairs.As the experience of service center engineers shows, in 80% of cases, a failure in the operation of the Indesit washing machine is due to one of the following malfunctions:

The heating element fails: if in other "washing machines", for example, Korean Samsung's, the heater is equipped with a special coating against the formation of scale, then in Indesite they prefer not to bother about this. As a result, the heating element rather quickly becomes covered with a heat-insulating "coat" of salt deposits, as a result of which it overheats and loses its efficiency.

Burnt out power filter: a very common problem for this brand of machines. Generally speaking, the surge protector in Indesit washers is a kind of weak link. There are many known cases when, even in new units, this element turned out to be defective. Often it is necessary to change the filter after 3 - 4 years of operation.

Bearings break: even owners of cars in the middle price segment risk facing this problem. The procedure for replacing the bearing is fraught with some difficulties due to the inaccessibility of the assembly.

The control unit fails: the statistics of failures for this element began to improve only since 2012, when cars were equipped with an upgraded version of control units. But, despite their higher reliability, they also junk quite often.

Motor sensor triggered.

If the quality of the electric motors themselves can be considered quite tolerable, then some of the parts necessary for their operation cannot boast of such dignity. First of all, this applies to capacitors, which often have to be replaced. To accurately identify the cause of the failure, the wizards recommend proceeding in the following order:If the surge protector is in order, again, using a tester, check the power supply in all elements of the electrical circuit, and subject the mechanical assemblies and parts to a close inspection. At this stage, even the most difficult breakdown is usually identified.In order not to forget what is screwed in, the assembly can be photographed before disassembly. Also, it will not be superfluous to study the device of the unit and the location of the fasteners before starting work. Image - DIY repair of the washing machine indesit wisn 101

A defective mains filter should be replaced. Note that even with good quality power supply (no power surges), a new part can last a very short time.

The reason is the formation of condensation on the contacts, as a result of which a short circuit occurs.

To extend the service life of the surge protector, its contacts must be cleaned and wiped with a clean cloth, and then filled with silicone sealant. Similarly, you can insulate other contacts that can be damaged by moisture.

Capacitor breakdown in the motor circuit is a more significant problem. Attempts to deal with it on your own can aggravate the situation. Difficulties can lie in wait for an inexperienced repairman even at the stage of diagnosis: the observed "symptoms" are often similar to those that occur when the electric motor itself breaks down. In order not to spoil the machine completely, it is better to contact the service center.

Another common problem is associated with the use of collector motors. They have low cost, high reliability and, with minor improvements, can smoothly change the shaft rotation speed. But these motors have brushes that need to be changed periodically. In the absence of experience, it is also better to entrust this task to the master.

Surge protector and cable for the Indesit washing machine

But the replacement of the heating element will be quite capable of the amateur. Here's what you need to do for this:

After unscrewing the fasteners, remove the back wall of the device.
The heating element is detected by two contacts protruding from the wall of the tank in its lower part.
Using a tester, check the presence of power on the contacts. If everything is in order with this, it means that the heating element has burned out and needs to be replaced.

To dismantle the heater, unscrew the centrally located fastener. Then the rubber seal is removed, after which it will be possible to remove the part itself. An unsuitable heating element usually has a characteristic appearance - a "fur coat" made of scale, burntness and other defects. The new heating element is installed in the reverse order.

Before installing the washing machine, you need to decide on the installation site. It can be a bathroom, a combined bathroom, in some cases, the equipment is installed in the corridor or in the kitchen. Connecting a washing machine - we will analyze the main problems and solutions.

How to choose the right mixer for your kitchen, see this review. The main selection criteria are material, type, manufacturer.

In small apartments, there is not always a place for a washing machine in the bathroom, so you have to install it in the kitchen. On this link https://my.housecope.com/wp-content/uploads/ext/740/cancliz/mnogokvartirnyie-doma/santehnika/kak-podklyuchit-stiralnuyu-mashinku-na-kuhne.html you will find tips for installing the device from the masters.

In previously produced models of Indesit washing machines, especially those made in Italy, it is quite easy to gain access to the bearing assembly. This is done as follows:

After draining the water and disconnecting the appliance from the mains, remove the top and rear panels.
Remove the belt by means of which the engine rotates the drum and block the latter with a clamp or a block of wood.
Having disconnected the wires from the thermostat, unscrew the screws securing the bearing assembly on the tank lid. You should be prepared for the fact that they will give in with great difficulty.
After loosening the clamp, remove the tank cap with the seal, after which you will see the bearing.
The bearing is fitted on the drum axis with an interference fit, therefore, to dismantle it, you need a special tool - a puller. Together with the worn bearing, the oil seal must also be removed. After installing new parts, the unit is assembled in the reverse order.

Install only original bearings.Among the parts produced by other manufacturers, low quality ones often come across.

In the latest series machines, the tank is made in one piece, so it is theoretically impossible to get to the bearings. It is assumed that the machine, in the event of such a malfunction, simply must be disposed of. But engineers in domestic service centers have found a way to make the Indesit "washing machine" repairable again. The tank is cut along the weld seam, after which all the elements inside are available.

After replacing the bearings, you need to assemble the machine and carry out a test run. If everything was done correctly, the unit will operate without extraneous noise. Also during testing, pay attention to whether water is leaking from the housing. If leaks do appear, the machine must be disassembled and reassembled more carefully. It may be necessary to replace the seals.

Diagram of the control unit of the Indesit washing machine

Some of the faults in the control unit can only be rectified by a service engineer. So, for example, if the electronics "went crazy" due to power surges, a flashing will be required. Sometimes the processor fails and has to be replaced. But sometimes the user himself can "cure" the main board. As in the surge protector, condensation can form on its contacts, causing them to close.

Damaged contacts are identified using a tester (rather painstaking work), after which they need to be replaced. It is advisable to isolate new contacts with a sealant, as described above.

Above, the malfunctions inherent in the machines of this brand were described. But they are not insured against the usual breakdowns typical for all washing machines. The most typical ones are:

The simplest reason is a clogged drain system. To resume the operation of the unit, it is enough to remove the accumulated dirt.

Worse if the pump that pumps out the water is out of order.

This can happen due to overheating of its motor or a short circuit in the winding. In such cases, a new motor is usually installed.

But the reason may be more simple: sometimes the plastic pump casing, which looks like a snail, is deformed from prolonged contact with hot water, while clamping the impeller blades. It is advisable to replace the damaged pump casing with a new one. If this is not yet possible, you can trim the impeller blades with a sharp knife.

To dismantle the pump, you need to remove the back of the machine. The node is located at its bottom.

You can try to "cure" this malfunction by purging the sensor. If this does not work, the device will have to be replaced.

Such an incident is unpleasant in itself, in addition, it can cause the machine to simply refuse to turn on. The fact is that the lock also has contacts, and if something prevents it from closing completely, they remain open and power is not supplied to the units of the unit.

Lock (lock) of the hatch of the Indesit Ariston washing machine

First of all, you need to try to tighten the belt, having previously disassembled the machine. Some models provide this option. If the belt is badly worn, it must be replaced.

If sufficient, the hose should be inspected for pinching or leaks.

If everything is in order with the hose, the problem may be a clogged coarse filter, which in this case is thoroughly rinsed.

A more serious reason for blocking the water supply is the failure of the level switch. Only a qualified technician can repair this item.

Bathrooms often do not differ in space, so residents try to organize the available space as ergonomically as possible. The place under the sink is ideal for installing a washing machine. Choosing a compact washing machine under the sink - an overview of the highlights.

How to choose a circulation pump for heating and what you need to pay attention to when buying, read in this material.

Video (click to play).