Do-it-yourself Indesit Wiun 103 washing machine repair

In detail: do-it-yourself repair of the indesit wiun 103 washing machine from a real master for the site my.housecope.com.

The Italian brand of automatic washing machines (ASM) has been successfully operating on the Russian market of household appliances for a long time. Washing equipment of European (Italian) quality Indesit, corresponding to all generally accepted technical standards and norms, implying their comfortable and long-term use by users of this type of equipment.

Washing machine Indesit

But, as the poet said, nothing lasts forever under the moon, especially when these words refer to quite often used devices, that is, Indesit AFM models WISL 102, WISL 103, WISL 82, WISL 85. Calling these samples of products of a well-known brand, we we do not have any special complaints about them and we just give their names as an example, as a model range that is in great demand among buyers.

All modern washing machines have as one of their functions a diagnostic check to identify possible malfunctions that periodically arise during the operation of the AFM. After carrying out a test wash or other operation, the computer device of the washing machine displays information on the device's display about a possible breakdown (if any). Information appears on the AFM screen in the form of an alphanumeric code, from which the name comes - an error code. The main malfunctions of the Indesit 102 washing machine (WISL 103, WISL 82, WISL 85 and other models) are indicated as follows:

F: 01 - a short circuit has occurred in the ACM engine electrical circuits;
F: 02 - faulty tachogenerator (sensor) or its connections;
F: 04 - breakdown in the relay responsible for turning on / off the heating element (heating element). Temperature sensor defective;
F: 04 - there is no liquid in the washing machine tank;
F: 05 - the drain pump is blocked;
F: 06 - malfunctions in the electronic equipment system of the device;
F: 07 - the water heater is blocked due to the lack of water in the tank;
F: 08 - problem with the heating element relay;

Video (click to play).

F: 09 - failure in the device software;
F: 10 - damaged water sensor;
F: 11 - the drain pump is out of order;
F: 12 - the contact in the electrical circuits of the electronic equipment is broken;
F: 13 - the temperature control circuit is out of order;
F: 14 - drying of the machine does not work;
F: 15 - again, drying;
F: 16 - the drum of the device is blocked;
F: 17 - tank intake hatch is open;
F: 18 - the electronic control module of the Indesit washing machine is faulty.

We have listed only the main types of damage to Indesit washing machines. But there are also a number of errors that are quite rare. In any case, you can find more detailed information about the fault codes of the Indesit washing machine when they appear on the AFM display in the table of fault codes attached to the device when it is sold by the manufacturer, as well as information about the available (do-it-yourself) methods of their elimination (repair) ...

In terms of solutions, the problems that arose during the operation of the AFM can be divided into two categories:

Do-it-yourself repair of malfunctions of the Indesit washing machine.
Malfunctions, for the repair of which you will need to call a professional service center specialist.

As a rule, almost all mechanical breakdowns can be repaired by hand. With minimal technical knowledge, experience, tools and desire. The desire is stimulated by high prices for specialist services, even with minor repairs. But there are breakdowns, in the event of which an appeal to the masters is simply necessary. This applies to the following types of work:

Repair of electronic modules of the device;
Breakdowns in the circuits and winding of the electric motor;
Software problems and so on.

Typical malfunctions of the Indesit WISL 102 washing machine (WISL 103, WISL 82, WISL 85)

One of the few malfunctions, but, alas, typical for the cars of this manufacturer, is the situation when all its indicators on the dashboard of the car simultaneously and chaotically start blinking. Moreover, this phenomenon does not depend on the presence or absence of a modern display. As a rule, he refuses to work together with indicators. Using this machine of the Indesit family as an example, we will consider the causes of such a breakdown and its possible repair with our own hands.

First of all, this behavior of light sensors is due to the failure of the EMU (electronic module of the device) or its individual parts (capacitors). Repairing the electronic board of an automatic washing machine is complex and expensive. In this case, without experience in radio engineering, it is better not to contact this problem and immediately call the service center master. But the breakdown of the EMU is not the only possible one. And the reasons due to which the light bulbs are blinking are quite understandable and available to eliminate them with your own hands.

So. AFM indicators blink because:

there was a spontaneous (not specified by the program) dropping of liquid from the tank of the machine;
one of the two heating elements does not work - heating element for drying or heating element for water heating;
problems with the ACM electric motor;
the drain pump does not work.

To specifically determine the type of malfunction and its location, testing should be carried out for each individual device from the above. As a rule, the task is greatly facilitated by a careful study of it by ear or by sight. So, extraneous, uncharacteristic sounds for a working machine let you know about a breakdown or partial malfunctions of an electric motor. Malfunctions in the heating equipment are revealed by visual inspection of the heating element. Their presence is indicated by a large amount of scale and precipitation on the heating element. The issue with the pump is also not difficult, the water does not drain from the tank or, on the contrary, it leaves on its own, regardless of the set program.

Thus, we can conclude. Before resorting to the services of professionals, you can try to solve the problem yourself.

Washing machines manufactured by Indesit are in high demand in the Russian market. The products of this company are distinguished by durability, ease of use, reliability, and all this at a completely democratic price.

Indesit equipment is reliable, but no one is insured against breakdowns. During operation, the user may encounter a variety of malfunctions. Often, the restoration of operability is possible only in the service center, but repairing the Indesit washing machine with your own hands can fix minor breakdowns.

Before taking on a screwdriver, it is worth soberly assessing your strength. A washing machine is a rather complex electrical appliance and you need to start repairing it only with the appropriate skills. But even if the qualifications of the owner allow you to count on a successful outcome, there are several situations in which it is better not to start an independent repair.

The machine is under warranty. Any attempt at home repairs will inevitably result in the manufacturer's denial of warranty obligations. Before the expiration of the warranty period, the correct solution to any problem is to contact a specialized service center.
Control box defective. It is unlikely that such a breakdown can be corrected on its own. The only correct solution would be to call the master or send the machine to the service.
Drum integrity violation. The drum of the Indesit washing machine is made of very thin metal. Its design does not involve repairs. In this case, only replacement is possible to correct the situation.Of course, if there is no master at hand who can weld the thin steel of the drum with jewelry precision.
Replacement of bearings. Most Indesit models are designed to make replacement of the drum bearings fairly easy. But not all of them. In some models, such repairs are simply not provided. In the event of a bearing failure, there is only one way out - you need to buy a new machine.

If the desire to do the repair is not lost, you need to prepare. It is worth starting with the preparation of the instrument. Depending on the detected malfunction, the list can be adjusted, in any case, you will need:

flat and Phillips screwdrivers (preferably several different sizes);
pliers;
nippers;
set of wrenches;
special pliers for clamps;
service hook.

The selection of the tool must be taken seriously. A quality tool is an important component of a quality repair.

Before you start repairing your Indesit washing machine with your own hands, you need to listen to it. The fact is that a large number of faults give out extraneous sounds that the mechanisms emit during operation. This applies to bearings, shock absorbers, pump malfunctions.

If there are no extraneous sounds or vibration, most likely you will have to disassemble the machine. But before starting work, you should carefully study its structure, understand the sequence of actions.

It is also useful to check the integrity of the power wire and the presence of voltage in the outlet. Quite often, the causes of a malfunction lie in plain sight.

Most models of Indesit washing machines have a built-in self-diagnosis system. The system checks the functionality of the components and signals a detected malfunction. Error codes, as well as display methods, can be found in the documentation for the washing machine. The presence of such a system greatly simplifies troubleshooting, and therefore the likelihood of successful elimination.

The result of the system operation is errors of the type F01 - short circuit of power circuits, F03 - temperature sensor is faulty, F07 - tank filling sensor does not work.

A fairly common malfunction. To fix it, you should start by checking the outlet, here you can use an indicator or simply turn on some other electrical appliance into it. If the socket is working it is worth checking the plug and the power cord. The machine does not heat up the water or start washing with lukewarm water.

The reason for this breakdown is a faulty heating element (heating element). The manufacturer guarantees its operation for 10 or more years, but the service life of any part directly depends on the conditions of its operation. In the case of frequent washes at high temperatures, it can quickly fail.

Replacing the heating element can be done at home; the element itself is not difficult to buy in the store.

The heating element is located under the drum; to replace it, you will need to remove the back cover of the machine. The sequence of work is as follows:

the machine must be de-energized;
disconnect the water supply and drainage hoses;
turn the machine over, remove the back cover;
remove the drive belt;
remove the broken heating element, install a new one;
assemble the machine, connect hoses and power supply.

The process of removing the heater is not particularly difficult. It is secured with one screw and connected with three wires. It is enough to remove the terminals, loosen the screw and pry the heater with screwdrivers to remove it.

Loud noise and vibration during washing can signal the need to replace bearings. It is worth noting here that the reason for this phenomenon may be improperly laid laundry or the presence of third-party objects in the drum. Before starting the repair, this version should also be checked.It is not difficult to make sure that the bearings need to be replaced; for this, it is enough to turn the empty drum by hand. If during rotation it dangles, and the revolutions are accompanied by third-party noise, the bearings must be changed. The process of replacing bearings requires special skills.To do this, you will have to disassemble almost the entire machine. Before getting down to business, it does not hurt to once again soberly weigh the pros and cons, and in case of doubt, take the machine to the workshop.

The drain system consists of several main parts and any of them can be clogged:

a branch pipe that removes water from the drum;
pump;
filter;
drain hose into the sewer.

It's worth starting with checking the filter. To access it, you need to remove the lower part of the front cover. Unscrew the filter by turning it counterclockwise.

If the filter is not clogged, and water flows out normally through the hole formed as a result of unscrewing it, it is worth checking the drain hose.

A fairly common malfunction of the washing machine - water does not enter the powder compartment, or it comes in with too little pressure. The cause may be low pressure in the water supply system or a clogged intake valve. It will definitely not be possible to solve the problem of low pressure on your own, but you can check the valve.

The inlet valve is located at the rear of the machine, approximately at the level of the powder container. To check and clean it, just unscrew the hose, rinse the mesh and screw it back on.

The cause of this malfunction is also the intake valve. It is worth starting repairs by checking the cleanliness of the receiving mesh, if necessary, rinse it.

If the mesh is pure, the reason may be in the solenoids that open and close the valve. To check them, the valve should be removed and, by connecting to a hose with cold water, alternately apply voltage to the coils. If one of them does not work, the valve must be replaced.

A strong hum of the machine when filling the drum or draining water can signal a malfunction or clogging of the pump. First of all, it is worth making sure that there is no blockage.

Often threads are wound around the impeller, preventing its normal rotation. To check, you need to remove the cover from the bottom, after turning the machine over. If there is no hindrance to the normal rotation of the impeller, most likely the pump will have to be replaced.

The electronic module controls the operation of the washing machine. Its malfunctions can manifest themselves in a variety of ways:

refusal to start the program;
chaotic switching of operating modes;
freezing (the system does not respond to the owner's actions);
flashing indicators;
significant increase in washing time.

In any case, there will be one solution to the problem - you need to contact the service.

One of the most reliable parts of the Indesit washing machine is the electric motor. Most often, its resource is much higher than that of other nodes, however, sometimes it also fails. The engine malfunction is determined simply - with normal display, the drum does not rotate in any of the modes.

Access to the engine is easy. It is located under the drum next to the drain and shock absorber. But for its diagnosis, special devices and knowledge are required, but it is easy to extract it in order to take it to a workshop or replace it with a new one.

In many cases, repairing a washing machine with your own hands bears the expected results. It is possible to save money on calling a specialist, while the machine works normally. True, this only applies to cases of minor breakdown or blockage. In the event of a serious accident, you cannot do without calling the foreman or visiting the workshop.

The model range of Indesit washing machines is not classified as a very reliable technique - this is evidenced by statistics provided by service centers.The reason was the users' appeals due to the reasons for the failure of the device. In the first five years of operation, Italian units under the Indesit brand are in repair shops much more often than machines of German and South Korean production.Nevertheless, the equipment meets European technical standards in terms of quality, comfort and durability. The models WISL 103, WISL 102, WISL 85 and WISL 82 are especially popular among Russian users.There are quite a few types of malfunctions that arise during the operation of machines. Of these, there are those whose calls to service centers exceed 75% of the total number of repairs:

1. Tubular heating element (TEN) at Indesit is made of stainless steel without coating. In the absence of a protective layer, the intensity of scale formation on the surface of the heating element is twice as high.

2. Surge protector is a weak point in Italian washing machines: on average, the product can withstand 3-4 years of operation. Sometimes there are deliveries of a whole batch of devices with defective surge protection devices.

3. Bearings at Indesit fail no more often than on similar devices from other manufacturers. The problem is not the difficulty of replacement, but the difficulty of accessing the defective part.

4. The control unit is a vulnerable spot on washing machines manufactured before 2012. In the latest models, an upgraded electronic module is installed. It has increased reliability, but there are also cases of failure.

5. The electric motor is trouble-free, but the motor piping, tachogenerator sensor and capacitors often fail and must be replaced.

The list does not include calls for another common problem - clogged filters. There are two of them in any car: at the water inlet from the mains and drain on the pump. This problem is fixed in most cases by users on their own.When starting repairs with your own hands, you must first determine the cause of the breakdown. Malfunctions of the Indesit washing machine are found in a planned manner. The chain of actions is as follows:

1. Look at the display of the device - many models have a self-diagnostic function and give a hint to the user in the form of an alphanumeric error code during program execution. To determine the correct reason, it remains to decipher the received signal and choose the correct option from several recommendations.

2. In the absence of a display or information on it, listen to the sounds of the device operation and see external manifestations: increased noise appears - you need to pay attention to the bearings. Usually this breakage is detected during spinning, when the drum rotates at a high speed.

3. The next step in the search for a possible malfunction is to look inside the washing machine-automatic. The easiest way is to open the filters and check for contamination; it is more difficult to approach the bearing assembly.

4. Inspect and feel the internal parts and structures: the place of the breakdown will indicate itself. If you have the skill to work with a multimeter, ring the electrical part for the integrity of the wiring and the effectiveness of the contacts and sensors.

In order to avoid complications during the assembly of the device, it is advisable to fix the crucial moments on a photo or video medium. It is good if you have a detailed description of the disassembled assembly at hand.The creators of the Indesit washing machine on all the latest models put a fault detection program into the control unit. For products marked WISL 103, 102, 85, WISL 82 and other designations are interpreted as follows:

1. Symbols indicating problems with the engine - F01 (short circuit) and F02 (tachogenerator sensor does not work).

2. Codes related to the temperature regime: malfunctions with the heating element relay or sensor F03 and F08, failure in the heating control circuit F13, drying malfunctions F14 and F15.

3. Informing codes about the involvement of water - an empty tank F04 and F07 (for this reason, the heating element is blocked), the drain pump F05 and F11 does not turn on or the drain pump F05 and F11 is damaged, the level sensor F10 is damaged.

4.Signs of faults in the electronics: general problems in the F06 system, software F09, faults in the contacts of electrical circuits F12, the control module F18 is broken.

5. Errors F16 and F17 mean, respectively, that the drum is blocked or the tank door is open.

This is an incomplete list of decryptions of fault codes for the Indesit washing machine. Rare symbols are not included in it. A complete list is included with the product.Breakdowns can be conditionally divided into two categories: available for self-repair and requiring adjustment in a service center. The first group implies the ability and desire of the user to perform independently defined actions based on existing knowledge using a special tool. The second part of the malfunctions is within the power of only specialists of repair shops:

electronic modules;

violation of the integrity of the circuit and motor windings;

crash of the program.

In the latter case, there is no need to rush to contact the service. You can simply unplug the machine from the power supply for a day or two, and then let it complete the wash cycle. During this time, the algorithm should be reset. If it didn't work out, then go to the workshop to reprogram.The most difficult repair is bearing replacement. Moreover, the problem is not disassembly, but inaccessibility associated with the special design of the one-piece tank. In this way, the manufacturer ensured the integrity of the unit for rearranging it as an assembly, and not in individual parts. In this case, the container is sawn along the weld, the breakage is corrected and the connection is restored.To independently repair the bearings using this method, you will need welding equipment, tools and skill. As for saving money on repairs, the result is ambiguous: replacing the entire unit may not cost much more.As noted above, the surge protector is a weak point in Indesit washing machines. This problem is exacerbated by high room humidity and power surges. This protection device is located where the power cord is connected to the machine. Easily dismantled after removing the top cover - just unscrew one screw. Repair of the mains filter consists in replacing it with a new one.When a capacitor on a car engine burns out, it is better to seek the help of a specialist: it is difficult to accurately diagnose a breakdown, it can be confused with an electric motor malfunction. But it is not difficult to cope with the repair of the heating element: the error F07 appears on the display, and if not, it is determined by the lack of water heating - the drum hatch is cold. The replacement is performed independently in the following sequence:

remove the back wall of the washing machine with a screwdriver;

in the lower part of the tank, two contacts of the heating element are visible from the outside - through them, check the serviceability with a multimeter;

if it does not burn out - continue looking for the cause, it must be replaced - unscrew the fixing screw in the middle, remove the sealing gasket and pull out the heating element;

installation of a new heating element is carried out upside-down.

The control unit of the Indesit washing machine is poorly protected from moisture, a short circuit occurs through the contacts. This leads to damage, which can be eliminated by identifying defective contacts with a multimeter and replacing them. Fill new elements well with sealant - protect from water.The Indesit washing machines of the WISL 102, 103, 85, 82, WISL 83 modifications are characterized by a situation when all indicators on the dashboard blink at the same time. This is due to malfunctions of the electronic module or its individual parts. The same problem is observed in the Indesit WIUL 103 model. An untrained person cannot cope with this problem and will need to call a master. But this is not the only reason, there are some that you can eliminate yourself:

there was an out-of-program discharge of water from the tank of the car;

failure of one of the heating elements - heating liquid or drying clothes;

problems with the electric motor;

breakdown of the drain pump.

To determine the true fault and its location, each of the listed devices must be tested. For a start - by inspection and listening. Engine malfunctions will give out extraneous sounds, the performance of the heating element is determined by the absence of scale and deposits on it, there are no questions with the pomp either: water either spontaneously drains out, regardless of the set program, or, conversely, is not reset in any way.The WISL 105 model stands out from its series for its high quality, and malfunctions occur in most cases from a violation of the operating mode. This is a failure to comply with the manufacturer's recommendations set out in the instructions, unqualified independent repairs, breakdown of parts due to strenuous use and a number of external factors. Hard water causes intensive scale formation on heating elements, unstable voltage causes failure of the mains filter. Factory defect of this model is rare, as in Indesite IWSC 5105.The WISL 62 modification is the exact opposite of the previous car. It has incorporated the disadvantages of all the above WISL devices.Washing machines Indesit models WIUN 81 and WIUN 102 have proven themselves well and they only need preventive repairs. They rarely fail due to a factory defect, have a high operational resource.Often, these machines have increased vibration when spinning the laundry. But this is due to the shallow drum depth - only 33 cm. Both models belong to the class of narrow machines with a small support area. Hence their instability. Eliminate the disadvantage by making the lower part of the apparatus heavier.Summing up, we can conclude that Indesit repairs largely coincide in complexity with the adjustment of other brands of washing machines. It is often more useful to turn to specialists than to create additional problems for yourself by unskillful actions.The popularity of the tyralny machines Indesit received due to the low cost. But for the initial cheapness you have to pay extra with repairs - the reliability of the brand is in question.But you can repair the Indesit washing machine with your own hands and eliminate many breakdowns if you have basic knowledge of mechanics, electrical and electronics.First of all, you need to determine what kind of breakdown occurred. Initial diagnostics will help you decide if it is possible to fix the problem yourself or if you still have to spend money on professional repairs.The right step would be to have a preliminary acquaintance with the scheme of the washing machine in order to have an idea of where everything is.Sometimes, to determine the cause of the failure of household appliances, it is enough to read the instructions for use, which, among other things, contains recommendations for eliminating breakdowns.The first step is to take a look at the display. If it is impossible to complete the specified process, the washing machine issues special codes on the display.Error codes in the operation of the washer are given in the instructions that the manufacturer must attach to his own product:With the help of a very useful multimeter device, it is possible to check various contacts, wiring, sensors. The device will show if there is power everywhere.Sometimes it is enough to listen to the sound emitted by the unit. When the washing machine starts to creak, make excessive noise, and sometimes rattle, then, most likely, there are problems in the bearings or the drum, the oil seal is damaged, the counterweight fasteners are loose, the shock absorbers are in poor condition.Calling the wizard is the only correct solution when:

the warranty period has not expired - if the operating rules are followed, the repair will be free;

threatening smoke came from the car.

In other cases, there are said to be options. But always the first stage of repair begins with disconnecting the faulty equipment from the mains. For negligence, electricity will punish necessarily and severely.An indispensable rule of a home master: do not act at random, use the instructions.When the display does not report a malfunction, there are no leaks, smoke, burning smell, then usually the problem is easy to fix:

If home laundry won't turn on, first you need to check if the plug is firmly inserted into the outlet. Occasionally, the washing machine can shut down due to power surges. It is also necessary to make sure that the operating mode is set correctly on the control panel;

When water does not flow into the tank, it is recommended to press the button responsible for starting and stopping the unit again, make sure that the door is closed tightly. Sometimes the fault is insufficient pressure in the water supply system, perhaps the tap was simply turned off, the hose was damaged. The reason may lie in the failure of both the program and the control system. Elimination occurs by repeated access to the "Start / Pause" button;

When the drain is not working first you need to check the filter - sometimes it is enough just to clean it.

And the source of the frightening rumble can be any object (for example, a coin) that accidentally ends up in the drum.This is a fairly frequent breakdown, although the declared service life of the heating element is 10-15 years. However, numerous washes in very hot and hard water, constant overloading of the tank, and low-grade detergents do an evil deed.Over time, a kind of "coat" of various salts is formed on the heating element. It breaks down from overheating, it is no longer possible to restore it. A heater malfunction is indicated by a cold hatch when the wash mode is on and, of course, laundry that has not been washed in cold water.Replacing a damaged part is quite simple: the manufacturers have placed the heating element in such a way that it is easy to get to it by opening the back cover of the case. The only inconvenience is that the car needs to be disconnected from all communications in order to turn the right side for repair. The heating element is placed under the drum pulley. Care should be taken when disconnecting and replacing the wiring board.A minimum of tools will be required: a flat and curly screwdriver, a key with a head are enough. You will also need a multimeter or tester to check the heating element. It is wiser to buy a new heater, the original Italian one.

Disconnect the unit from all communications.

Unscrew the bolts around the perimeter of the cover.

Further, under the tank, you need to find the contacts of the heating element and attach the multimeter probes to them. Normal resistance is 25-35 Ohm, other indicators indicate a malfunction.

The next operation: disconnecting all wires with terminals, fixing their position in memory.

Then the nut is unscrewed on the bolt, the end of which is located in the center of the heater base.

In order for the bolt to go into the hole, it should be gently knocked over it.

Pull out the heating element base by picking it up with a flat screwdriver.

Move the thermal sensor from the damaged part to the new heating element.

Clean out the formed debris from the seat for the electric heater.

Leave the new heating element in its intended place, fasten it with a bolt.

Then it remains to return the wires to their original position, close the rear cover of the machine and restore the connection with communications.This is also a fairly common problem. The pump is a weak point of automatic washing machines. In addition to a blockage, when it is enough to clean the hose and filter, the impeller can jam. It is located behind the drain filter, which must be unscrewed and removed.To prevent the impeller, you need to try to rotate. It should not be too light: in a normal state, the impeller rotates with certain delays due to the magnet in the coil. Sometimes threads, hair, laces and other similar debris wrap around the impeller so that they even block it. All these interferences must be removed.It happens that the plastic body is deformed and begins to clamp the blades.When there is no possibility of replacement, the blades must be cut with a knife by no more than 2 mm, and the washing machine can still be used.If after that the work is not restored, then the breakdown is more significant and requires a detailed inspection - the pump will have to be disassembled. The car is laid on its side, the screws that fix the pump to the casing are unscrewed, the electric cable and 2 hoses are disconnected.Clean the hoses if necessary. The tester checks the motor windings to eliminate the possibility of breakage. Typical resistance values here are 150-300 ohms.Without hoping for memory, it is worth noting the orientation of the pump relative to the engine I. Then the pump motor is disconnected from the housing, the rotor is removed from the stator. Often everything inside is clogged with dirt that interferes with the rotation of the rotor. In such cases, a thorough rinsing is required.The rotor axis bearing is lubricated with lithium, the oil seal is adjusted. Subsequent assembly is carried out using a sealant to prevent leaks.If you follow the instructions for caring for your washing machine and clean the drain hose every 6 months, the likelihood of breakage of the drain system will be greatly reduced.Indesit's motor is well-designed, reliable and durable. However, nothing is eternal, and at one not very beautiful moment, the "heart of the machine" may fail. The reason can be not only wear of the mechanism, but also excessive overload.

First, the outer panels are removed from the machine, usually the top and rear.

O Disconnect the supply wires.

Remove the belt from the pulley.

Screw the fasteners, remove the motor.

After diagnostics, the final decision is made to repair or replace the engine. Usually they tend to the latter option - it is difficult to restore the engine, it is easier to completely replace it. The installation of a new engine is carried out in the reverse order.Before disassembly, the assembly should be photographed, then there will be no problems with what to screw in.When in a working washing machine, especially during spinning, unusual sounds appear, and not episodic, but gradually increasing, this is a clear signal of a malfunction of the bearings, which indicates the ease of rotation of the drum.Do-it-yourself repair in such a situation is possible, but you cannot call it simple - you need extreme care, strict adherence to the sequence of operations:

Remove the top and rear panels.

Remove dispenser, control unit.

Twist the cuff clamp, remove the cuff itself and the hatch locking device.

Remove the front wall and counterweight.

Remove the tubular electric heater, noting the sequence of connecting the wires in memory.

Disconnect the parts connected to the drum tank, dismantle the drive belt and motor.

Remove the tank, place it on a flat place with the pulley up, then unscrew the pulley bolt, remove the pulley itself.

Using a mallet (you can use a simple hammer and a wooden gasket) to sink the shaft down, untwist and divide the tank into two halves.

Remove the bearing with a special puller, dismantle the old oil seals.

After installing fresh oil seals, press in a new bearing.

The assembly of the washing machine is carried out in reverse order with strict sequence of operations. To prevent the tank from leaking, all seams must be sealed.The main thing when replacing a bearing is care and adherence to the sequence of operations.A flabby hatch lock can cause another nuisance - the washing machine will stop turning on. The shut-off device is also equipped with contacts, and when something prevents complete closure, electricity does not flow to the units of the unit.Failure is usually caused by the accumulated dirt in the lock. After its elimination, the normal operation of the device, as a rule, is restored.And the mortiser s dampens excessive vibrations that appear in the washing machine. This is especially necessary during spinning, when the rotating drum is at the highest speed. Over time, they diminish in effectiveness.As a result - excessive vibration, atypical noises, knocking during the spin cycle. A common cause of failure is the wear of the gaskets and separating the piston and cylinder, which subsequently deform.The shock absorber cylinder contains a rod, consisting of a rod and a gasket treated with a high-friction lubricant. Oscillations are damped by moving the piston.The jerky jerk of the tank forces the piston into the cylinder, reducing vibration. There is also a spring in the cylinder that returns the piston to its original position - it is called the return one.To get to the shock absorbers, you will have to remove the rear panel (in some modifications, the side or front cover can be removed). After unscrewing the nut at the bottom of the shock absorber, it is disconnected from the body. In the same way, the part is released from above. A new shock absorber is installed in place of the old one and fixed in the reverse order.In the latest models, instead of shock absorbers, dampers are used, where the return spring has been replaced by a whole spring system attached to the upper area of the tank and providing it with a "suspended" position. This design is more reliable, better dampens unwanted shocks.To check the performance, the damper must be removed from the body by unscrewing the bolt in its lower segment, and try to press on it so as to compress and then unclench the mechanism. If the result is minimal, the device is in normal working condition. When the piston easily changes position, the damper needs to be replaced.It is removed from the case in the same way as conventional shock absorbers, although in some models the mounting bolts are replaced with plastic pins with latches. Install the new damper in the usual way - in reverse order with respect to the assembly.It happens that the detergent does not want to leave the tray. This usually happens when he is poured there without measure. The problem disappears with the correct dosage.Weak water pressure can also be to blame. It is worth trying to clean the filter where the washing machine connects to the inlet hose.Another option is to increase the pressure at the tap supplying water. Sometimes water cannot enter the tray due to a blocked valve. Then you should pull out the tray, find the valve in the form of a key and carefully clean it.These are the most common causes of improper detergent powder behavior and can be easily dealt with without the help of a professional. A more difficult case would be a problem with the water inlet valve where the powder does not leave the tray at all. Valve replacement is already required. The same can be said about the solenoid valve, which is responsible for filling the cuvette with water with water.The control unit in Indesit washing machines does not have reliable protection against moisture, as a result, condensate gets on the contacts, short circuits occur, which take the device out of the working state.Repair requires subtle diagnostics in the "Autotest" mode, serious knowledge in radio engineering, masterly possession of a soldering iron, skills in handling microcircuits, boards, semiconductors. This is usually the area of expertise of skilled professionals.For the rare daredevils from the army of home crafts, the most general tips:

remove the cover from the control unit;

remove the module;

inspect faulty contacts and connections;

evaporate damaged parts;

solder conditioning elements in their place.

But work with electronics is far from being for everyone, so we recommend that you abandon experiments and turn to professionals.You can get acquainted with the practical application of tips for repair and replacement of spare parts by watching informative videos.Quick replacement of heating elements in the Indesit washing machine: