Do-it-yourself washing machine repair lji water flows

In detail: do-it-yourself repair of a lji washing machine, water flows from a real master for the site my.housecope.com.

LG washing machines have drawbacks, one of which I will talk about in this article. In the process of using them, such a defect often occurs - water flows from the powder compartment of the washing machine. You can cope with this problem on your own, without resorting to outside help. It is not difficult, short-lived and does not require special skills and knowledge or special qualifications. Contacting the service department in such a situation will cost a pretty penny, therefore, in order to save money, we will do everything ourselves completely free of charge.

Before fixing the car, you need to understand the cause of the problem and localize it. The leakage of the powder receptacle of the washing machine may be a manufacturing defect or occur over time from the abrasion of certain parts. The leak can appear in various places, namely:

The perimeter of the tray in the area where its top and bottom meet. To make it clear, I will immediately make a reservation: we will call the part into which the container for washing powder or gel is inserted. Here are its joints and leaks.
In the area of joining the tray with the front of the machine.
A hole above the container into which the powder is loaded. This happens because the retractable part in the process of use is grinded off over time, or rather, the elements that hold it pressed against the top of the tray are abraded.
Corrugated rubber hose, through which the powder is washed from the tray into the drum.

There is one peculiarity here. This corrugated tube is positioned so that its lower part slides over the balancing stone and abrades against it, and so that a hole is formed. It is possible that this was done on purpose.

Today, many manufacturers, trying to increase money turnover, strive to ensure that their products wear out immediately after the expiration of the warranty period. And they had to be repaired or bought new ones. What do you want? This is business!

Before proceeding directly to the repair, we will prepare everything that may be needed. Nothing special is needed. Usually everything you need is in every home. You will need these tools:

flat and Phillips screwdriver;
pliers;
file;
hacksaw for metal.

Video (click to play).

You will also need a silicone or car sealant. You may also need a new tray, because not always and not everything can be repaired, it happens that you have to change. But you should not stock up on them, it is better to understand whether there is a need for it or you can fix the old one.

First, try to identify the place where the tray is leaking. But do not be discouraged if you cannot immediately understand where the tray is leaking. You will definitely find out when you disassemble the machine.

Open the powder compartment, press on the central compartment and take out the drawer. Use a Phillips screwdriver to unscrew the self-tapping screws on which the tray is attached. Now we will deal with the cover of the machine. On the back wall, we find the screws that hold it, and unscrew them with the same Phillips screwdriver.

Important! We are in no hurry to remove the cover. First, we move it as shown in the picture. And only then we raise.

The lid was opened. Now we remove the hoses coming from the tray (there are 4 of them). Immediately visible are only 2 water hoses attached to the back of the tray. Another one, for venting air, is fixed on the right, it is also not difficult to find it. The fourth hose, a thick corrugated tube, can be seen on the left side by slightly sliding the tray to the right. He then rubs against a stone.

To remove the hoses, use pliers to push back the clamps, after which the tubes can be easily removed. Then we pull out the tray itself.We carefully examine all the removed parts. If there is scale somewhere - remove it with water and a cleaning agent, this will allow the machine to work longer.

If the thick hose is frayed, it will have to be ordered from a service. You can't fix it yourself. To prevent this from happening again, the masters advise to glue the stone with a thick layer of cellophane or soft plastic in the area of contact with the hose. After that, it is better to fill this place with sealant so that the structure holds better. Now we open the compartment by pushing the clamps with a flat screwdriver to process the joints. Having opened the compartment, we spill the seams with a sealant to eliminate the leak.

After all these procedures, we assemble the machine in reverse order. One more tip. Position the machine so that it is straight upright using a level. Or at least eliminate the forward bias. These simple steps can also help stop the leak.

Share your opinion - leave a comment

If you notice that the washing machine has leaked, the reasons for this should be looked for immediately in order to immediately eliminate them. Otherwise, the situation can have disastrous consequences, ranging from a breakdown of the unit and ending with a strong flood with the risk of flooding both your apartment and your neighbor's below. It is important to determine exactly where the leak was and when (on which wash cycle).

Any washing machine, even the most reliable company, can leak. To the question "why is the Lg washing machine leaking?" there is only one answer: "The same as everyone else!"

wear of parts;
violation of operating rules;
accidental damage;
manufacturing defects;
poor quality powder, etc.

To suppress the flood, turn off the machine from the network, shut off the water supply, drain the water from it. Examine the washer carefully.

The drain hose (when draining) and the inlet hose may leak. The problem with them is not the worst thing that could happen.

If the gasket is frayed and leaks, it must be replaced.

You can glue the puncture in the hose, put on a patch cut out of rubber and glue it with special glue. As a last resort, just rewind with electrical tape - that's enough to finish the wash. These are temporary measures. The hose still needs to be changed, especially hurry up if it is the hose through which the water is supplied. Under a large pressure of water, the flow may resume.

It happens that the machine starts to flow at the moment the water is supplied. Check the condition of the dispenser, whether it is clogged.

This happens when the powder is not completely dissolved and its remains clogged the grate. The sludge after dirty water could also clog the dispenser. This also happens with excessive water pressure. It is necessary to pull out the hopper with a dispenser and clean it. To reduce the water pressure, you can slightly tighten the supply valve.

The pipes are damaged. The branch pipe from the inlet valve, drain valve, from the dispenser to the tank can leak.

It needs to be replaced or sealed, and sometimes just tighten the clamps. To do this, they determine the problem, dismantle the branch pipe, change it. You can temporarily not change to another, repair the one that is: disconnect it, treat it with a sealant and attach it in place with high-quality rubber glue. You can start the machine only when the glue is completely dry. The pipes fail due to their poor quality.

The washing machine tank is very durable. If you do not violate the rules of operation, it will not flow.

If the drum of a Samsung washing machine or some other company is leaking, there is only one way out - to call the master, who will solder the leak.

Most often, the reason is a faulty oil seal. It will have to be replaced.

Damaged cuff. Damage is caused by sharp objects left in the clothes (a nail, a bone from a bra). The cuff can be replaced by yourself.

Some problems with the washing machine can be solved on your own. Doubt in your abilities? Do not aggravate the problem if the machine is leaking - call the master! Contact the service center "RemonTechnik" and your problem will be solved quickly and efficiently.In case of replacement of parts, they will supply original ones, they will give a guarantee for repairs. And no more leaks!

Repair video for a washing machine if it leaks

The branch pipe may break after 12 months from the beginning of the operation of the washing machine, it happens less often with LG machines. This breakdown is connected with unscrupulous manufacturers who are trying to save money on everything.

If the main leak occurs during water intake, then the problem is most likely with the pipe. To make sure that this is really the case, you will have to remove the top cover from the machine.

It happens that the drain pipe starts to flow to the drain pump from the tank. You can verify this by tilting the washing machine and looking from below. The branch pipe for filling water into the tank may start to leak. To check this, you will have to untwist the front wall and inspect the junction. To eliminate the problem, you will need moisture-resistant glue, which you need to thoroughly lubricate the connection point of the branch pipe.

If water leaks from the hatch where the clothes are loaded, then the sealing cuffs are damaged. It can be repaired or replaced; for a quality repair, you should call a master. To avoid such damage, carefully check the pockets of your clothes before loading them into the washing machine. Small items often remain in pockets, which with pointed edges can damage the cuff and lead to leakage.

Minor cuts in the cuff can be repaired with a patch of rubber and waterproof glue. If the damage is large, a complete cuff replacement will be required.

Problems with the tank can arise if you often wash not only clothes, but also shoes, belts, clothes with metal elements, which gradually damage the surface of the tank and lead to breakage. If a crack appears in the tank, then it will have to be changed, and this will take money and a lot of time. You can try to seal the crack, but more often than not, this does not end well.

The tank consists of several parts, which are connected using brackets or bolts, with a gasket that connects them. Over time, the gasket is damaged and then a leak occurs, after which it may be necessary to replace the gasket.

If a leak occurs during spinning, it means one thing - the oil seal is damaged, immediate repair is needed. It is important to remember that the oil seal will wear out over time, which immediately leads to leakage during spinning. To check the condition of the oil seal, you need to inspect the tank. By the way, during the inspection, there may be a need to change not only the oil seal, but also the bearings.

If you decide to do without the help of a wizard and troubleshoot yourself, then you should be careful, if you do wrong, you can only make it worse. Warranty service does not apply if you were doing repairs at home on your own.

If a leak begins at the bottom of the washing machine, then you should perform the following steps one by one in time on your own:

turn off the equipment from the power supply. Unplug the machine from the outlet carefully, and do not allow water to come into contact with you. This will prevent possible troubles, primarily electric shock. If you cannot turn off without contact with water, then you should turn off the entire electricity system in the switchboard;
as soon as a leak occurs, turn off the water supply;
as the washing machine is turned off, open the door, remove all clothes from the washing machine. At the end of the wash, you should drain the remaining water from the machine through the drain filter, which is at the bottom, in front of the washing machine, at least for LG.

Then we proceed to the detection and elimination of the resulting breakdown.If the hoses are damaged, after finding the place of leakage, you can begin to eliminate the hole (if you decide to repair, and not replace the hose). The hose can be repaired with a waterproof glue and a rubber patch. If it turns out that the problem lies in the gasket between the hose and the body, then you should unscrew and release it. Then replace the old gasket with a new one purchased in advance. After the manipulations, assemble the structure back.

If it turns out that the problem is related to the dispenser and the equipment is leaking, it means that it is necessary to eliminate the malfunctions in it. Remove the dispenser from the device, clean it properly, if a blockage is found, remove it. Then you need to return the dispenser back and test the operation of the equipment. It is necessary to check how strong the pressure is, if necessary, slightly close the inlet valve, reducing the pressure. If all these manipulations did not help, this may mean one thing - the inlet valve is badly damaged, it can only be repaired by a specialist in the repair of washing machines.

Another reason for the leakage of the washing machine may be the loss of integrity and elasticity of the main cuff, which is installed on the loading hatch. To check the integrity of the cuff, whether it is leaking, you need to open the hatch to examine the condition. If minor damage is found, they can be repaired with waterproof glue and rubber patches. Remove the clips-clamps and the place that was patched up, move to the bottom of the hatch, then return the clips to their place. If it turns out that the cuff is badly damaged, then you need to order a new one replacing the old one.

If you decide to check and repair the inlet valve pipe, then you will need to remove the top cover of your washing machine, then start examining the part. If the condition of the pipes has visible damage, or the pipes have acquired an appearance that differs from the norm, then they should be replaced, which means that the pipe is leaking. A branch pipe of this type is a complex part that will be replaced by a qualified technician. The filler pipe of the washing tub may also break. Check if there is water at the junction, which means you need to disconnect the filler pipe, remove excess glue, remove all liquid and dry the junction thoroughly. Then return the pipe to its place, while fixing it with high quality waterproof glue. For these purposes, you can also use an epoxy mixture.

You will need third-party help to fix problems with the tank. Let the assistant tilt the washing machine and hold it, then you can examine the general condition of the bottom of the machine. If equipment is loaded from above, then the side wall should be inspected. The purpose of the inspection is to detect traces of liquid. If water is found on the wall or bottom, then the problem is definitely related to the operation of the tank. This is one way out - call a specialist, it is impossible to repair the tank yourself, if it leaks.

If a leak occurs during spinning, it means that the oil seal has broken or the bearings have become unusable. In this case, you need to contact the master, he will repair the apparatus and replace the main bearings.

The overall service life of parts and equipment depends on how you use it. To avoid the problem of leakage, you need to adhere to certain recommendations:

metal parts of clothing can damage the drum, then you should adhere to a certain rule: wash all clothes with metal parts in a special bag. You should also do with small things, they can be sucked into the drain pipe of the machine;

before closing the main cover of the washing machine, make sure that the drum door is closed securely. This is the case if your washing machine is top-loading, like some LG models. This will prevent leaks during spinning;

when the wash is over, do not forget to unplug the equipment from the outlet - a voltage surge can disable it;

it is better to install the washing machine where there is less humidity, for example, in the kitchen;

do not overload with things, then the washing machine will work for a long time and it will not happen that it leaks during spinning;

if low-quality water flows in the water supply system, install a filter in the system;

and most importantly - do not use low-quality detergents, this will certainly lead to breakdown, and you will wonder why the machine is leaking, what to do now.

If you constantly monitor and take care of the equipment, it will not break at an unexpected moment and will last a long enough time, it will not happen that the washing machine leaks. Image - Do-it-yourself washing machine repair lji water flows

When we buy a new washing machine, we expect that it will serve us for a long time and please us with clean things. All washing machines have a different service life, and it depends not only on the factory defect, but also on its correct operation.

One of the frequent breakdowns in washing machines is leakage. It looks like this: water flows from the bottom of the washing machine. Water can drip little by little or "beat with a fountain" - in either case, urgent repairs are needed, which you can do yourself or call a master.

If you are accustomed to personally eliminating any breakdowns of equipment and repairing it, then this information will be very useful for you. After all, it is here that we will analyze the reasons for the leakage of the washing machine, as well as ways to eliminate this malfunction.

We visually find the place of the leak
Before starting any repair work on the washing machine, disconnect the power supply by unplugging the power cord. You also need to pay attention to the moment at which the washer is leaking, - this information will allow you to more accurately determine the cause of the leak.

After that, visually inspect the place where the water flows from. To do this, you need to tilt the washing machine or completely remove the side or rear wall from it. Try to pinpoint the location of the leak as accurately as possible, then read below about the causes and remedies.

One of the most common reasons for water leaks from under the washing machine is hose wear and poor connections at the joints.

Inlet hose

If the inlet hose is leaking, you will find the leak even when the washing machine is not running. Carefully inspect the joints of this hose with the body of the washing machine, and also check its integrity. Replace it if necessary or, if the connection is poor, change the gasket and tighten well.

Drain hose
If you find that the washing machine is leaking when draining water or during spinning, and the place of the leak is the drain hose, then most likely it is simply damaged. First, check the junction of this hose with the washing machine pump and inspect the hose itself. Replace the drain hose if necessary.

Leaking pipes
If you notice that most of the water runs out from under the machine during water intake, and after filling it, the water no longer flows, then the likely cause of such a breakdown is a damaged a branch pipe that goes from the filler valve to the hopper for the powder receptacle.

In order to check the integrity of this pipe, you will need to remove the top cover from the washing machine.

Second a branch pipe that can leak - drain... It goes from the tank to the drain pump. To check it for integrity, you need to look at it from below by tilting the washing machine.

The third pipe that can leak during water collection is branch pipe for filling water into the tank... To get to it, you will need to remove the front wall from the washing machine, and then inspect the connections of this pipe. If it is he who flows, then most likely the connection of the branch pipe with the tank is simply ruined.

If it is attached with glue, then you will need to detach it, clean it and dry it well. Next, you need a good moisture resistant glue or epoxy. Smear the junction of the pipe to the tank and glue it in place. Let the glue dry well, after which you can start checking the washing machine.

The machine may leak if the drain pump is unusable or damaged. If it flows from it, then inspect it visually, unscrew it if necessary and check its integrity. More often than not, it just changes to a new one and the problem is solved.

On our website you can read about replacing the pump in the washing machine yourself.

Very often, users of washing machines forget to pull small things out of their pockets, it even happens that sharp objects come across, which during washing can damage the cuff of the washing machine, which, in turn, causes leakage through it.

In such cases, there are two options for solving the problem:

Repair of the cuff
If the damage to the cuff is small, you can simply seal it with waterproof glue and a patch. The patch can be made from rubber, or you can buy a boat patch from a fishing or travel store. After you have sealed the hole, it is best to turn the cuff so that the patch is on top - this way there will be less stress on it and, accordingly, it will last longer.

Replacing the cuff
Of course, if the cuff is damaged, it is best to replace it completely. To do this, you need to remove the old cuff and put a new one in its place. You can see how to do this in the video below.

If you notice that water is flowing through the tank, then there may be several reasons, which we will discuss with you in order.Crack in the tank
Washing machine tanks are usually made of plastic and are therefore relatively fragile. If you washed things with small change or other metal objects, then one of these objects could get into the space between the tub and the drum of the washing machine and damage the tub.If there is a crack in the tank, then it must be changed, which is a rather expensive and troublesome undertaking. You can, of course, try to seal the crack with moisture-resistant glue, but this solution will not give a good result, so it is best to replace the tank.
Image - Do-it-yourself washing machine repair lji water flows

Tank halves connections
Most often, the tank in a washing machine consists of two halves, which are interconnected by brackets or bolts, and a gasket is located between them. This very gasket dries out over time and can leak, which is extremely rare. In order for you to replace it, you will have to disassemble the washing machine almost entirely.

If you notice that the machine is leaking from the side of the bearings, then this means only one thing - the oil seal is worn out, which requires replacement. Usually, with such a breakdown, most of the water flows during the spin cycle.

Replacing the oil seal is a rather difficult task that occurs along with the replacement of bearings. Therefore, to eliminate this problem, we recommend that you call the wizard. If you decide to carry out repairs yourself, then read the article on replacing bearings in a washing machine.

Leaking powder tray
Check the powder tray for foreign objects or powder residues. Just take it out and see if there are any smudges on it, clean it if necessary.

If the water pressure in the tap is too high, then water may also spill out during the rinsing of the powder from the powder receptacle. You can reduce the water pressure by slightly turning the washer tap on your water pipes.

Also, with some washing machines, it happens that the edges of the washing powder tray wear out, as a result of which the machine begins to gradually leak through it. For more information on this problem and how to solve it, see the video.

Pump drain valve not twisted
If you recently cleaned the drain valve, then it is possible that you did not screw it tightly enough, and water flows through it. Remove the bottom panel and check if the valve is tight and not leaking.General recommendations
If your washing machine leaks from below, this is the first sign of improper operation and non-compliance with the rules for using the equipment. Therefore, to prevent such incidents from happening, always remove all items from your pockets before washing, repair the machine in time if any breakdown is found in it - after all, one malfunction can cause another.When buying a new washing machine, people rely on its long and trouble-free operation. But any household appliance has its own shelf life, and it is determined not only by the reputation of the manufacturer, but also by the correct operation. That is why many owners sooner or later face the fact that their washing machine is flowing from the bottom.This is one of the most common faults. If water flows onto the floor, it doesn't matter if it drips or runs in a stream, an urgent need to repair the washing machine on its own or call a master.If you prefer to troubleshoot home appliances yourself, this article will probably come in handy for you. Let us consider in detail the reasons for the leakage of the washing machine and the methods of its repair.

Washing machine dispenser hopper clogged.

Tank not sealed (crack or breakdown appeared).

One of the hoses (drain or inlet) has been damaged.

The pump is leaking.

Tank oil seal worn out.

The door rubber cuff is leaking.

One of the pipes has lost its tightness.

Before starting repair work, you need to de-energize the equipment by removing the plug from the outlet. Then you need to figure out which of the many elements of the washing machine is leaking. To do this, the washing machine must be carefully inspected.

It is extremely important to find out the cause of the breakdown at what stage of the operating cycle the washing machine began to leak from the bottom. This will greatly facilitate the troubleshooting task and will allow you to detect 1 of 3 possible leak locations. Leakage locations such as:

Drain and inlet hoses for water often leak where they dock with the unit. To get rid of such a breakdown, you need to unscrew the hose for filling or draining water and change the rubber gasket.

But it also happens that the hose has worn out, or was accidentally damaged, then to restore its integrity, you can use a special glue and a rubber patch, although replacing it with a new one would be a more reliable option. But all of these recommendations are suitable for the drain hose. If the inlet hose has been damaged, we do not recommend repairing it with a patch, since the water pressure in it can be very high, and then replacement becomes the best option. You can buy a water inlet hose at any plumbing store, moreover, inexpensively.

The dispenser may be damaged if the hopper (i.e. powder compartment) is defective. As a rule, it leaks when it is clogged, either due to excessive water pressure, or due to a failure of the intake valve. What to do in such a situation?If it’s a valve, you’ll see leaks in the area below it. To eliminate the causes of the leak, remove the dispenser and thoroughly clean it and the hopper. It so happens that a foreign object appears in the drain of the bunker, which does not allow it to work normally. If you find such an item, remove it from the powder compartment. Image - Do-it-yourself washing machine repair lji water flows

After cleaning, test the operation of the washing machine. In addition, it is worth trying to reduce the water pressure by slightly closing the tap. If none of the above helps to cope with the leak from the bottom, it is necessary to replace the inlet valve, since it is its breakdown that can cause the high water pressure during the rinsing phase.

It is not uncommon for many people to forget to remove all items from the pockets of their clothes before loading them into the washing machine, and many of them can be very sharp. As a result, the cuff on the door of the washing machine is damaged during the wash process and begins to leak.

In such a situation, you can fix the breakdown in one of 2 ways:

Repair. If the hole is small, try covering it with moisture resistant glue and a rubber patch. You can also purchase a custom boat patch from your fishing specialty shop. After sealing the hole, the hatch cuff should be installed in such a way that a piece of patch rubber is placed on top - this will reduce the pressure on it and, therefore, increase its service life. Since the collar can also be damaged on the inside, we recommend dismantling it to seal the holes.
Replacement. If the damage caused is too great, a complete replacement of the cuff of the washing machine hatch will be required, for which you need to do the following: dismantle the faulty cuff and install a new one instead.

It is likely that the reason why water began to flow from the water supply hose is the weakening of the attachment of the nozzle to the tank of the machine. To find out if this is so, a thorough examination of the tank is required. If you see traces of water leaks, then the problem has been found.

To repair or replace the inlet hose of the washing machine, you need to remove the branch pipe, then clean all sections of the joints from the remaining glue and dry them. Then you can re-fix the branch pipe, for fixing which you need epoxy resin or high-quality moisture-resistant glue.

If you saw that it is the tank that leaks, there may be two reasons for such a breakdown, we will consider them in detail.

The buck is cracked. Tanks in automatic machines are most often made of plastic, which is why their reliability is rather low. If you forget to empty the pockets of your clothes, during the operation of the unit, one of the objects in them could fall out of the pockets and damage the tank.

If the tank is cracked, it will need to be replaced, which is a very expensive and complicated process. Of course, you can try to remove the crack yourself using waterproof glue, but this is unlikely to help you for a long time, because the tank will most likely need to be changed, and this will have to be done with the help of a specialist.

The joints of the tank parts. As a rule, the tank of the automatic machine includes 2 elements connected to each other by metal brackets or screws, and in the space between them there is a rubber gasket. Such pads dry out over the years and begin to leak. To change the gasket, the device must be almost completely disassembled.

See also -Do-it-yourself repair of a washing machine tank leak

If the washing machine leaks from the bearings, the reason is the wear of the oil seal, which means that you cannot do without replacing it. Most often, with such a malfunction, the main volume of water flows out during the spinning process.

If an oil seal leak is found, turn off the machine immediately, because due to water, the bearings can rust and also break, and this will lead to more serious problems.

Changing the oil seal is not easy for a layman, since the process will also require replacing the bearings of the washing machine. That is why we advise you to contact a professional to repair such a breakdown. If you still want to repair the unit on your own, before that you will need to understand how the bearings are replaced.

Video (click to play).

If you have been cleaning the drain valve not so long ago, it is possible that after the end of the procedure you forgot to carefully screw it in, and as a result, a leak has formed. Take out the bottom panel and make sure that the valve is screwed in completely. The main reason for the appearance of a leak in the washing machine is mistakes made during its operation.Therefore, in order to avoid such breakdowns, we recommend that you always check the pockets of clothes before loading into the machine, and carry out repair work in a timely manner at the first detection of any malfunction.

Rate the article:

Grade 3.2 who voted: 85