DIY washing machine repair zanussi

In detail: do-it-yourself repair of zanussi washing machines from a real master for the site my.housecope.com.

Zanussi washing machines have long held a strong position in the domestic market of household appliances. During this time, they have become very popular due to their reliability, functionality and other positive qualities. Nevertheless, like any other equipment, these units are subject to various breakdowns and malfunctions, which sooner or later occur during operation. Therefore, many owners turn to the service center, although in many cases it is quite possible to repair the Zanussi washing machine with their own hands.

Sometimes it happens that the drum of the Zanussi washing machine stops rotating. In this case, it is recommended to turn off the machine, drain the water and try to scroll it manually.

If the drum does not turn, then it is quite possible that it is jammed. This can happen for the following reasons:

The bearing is defective. The main reason is the wear of the sealing gland, which allows water to pass through due to the loss of elasticity.
It is not uncommon for foreign objects to fall between the tub and drum from the pockets of clothing.
Driving belt slipping off. Usually the problem is solved by replacing it, in some cases - along with the bearing.
In units with vertical loading, doors may open and catch on heating elements or other parts.

If the drum is turned by hand, but does not rotate in operating mode from the electric motor. There are also certain reasons here:

Defective motor due to moisture or power surges.
The drive belt is gradually frayed, weakened, or completely torn.
The motor brushes are out of order.
In electronically controlled Zanussi washing machines, the control unit is faulty, requiring repair or complete replacement.

Video (click to play).

In any case, a thorough diagnosis is required, and qualified specialists should be engaged in the repair of this unit.

In this situation, water is not poured into the tank. Sometimes the machine draws up water, but it happens very slowly. Subsequently, the wash program fails and the process stops completely. This could be due to a faulty heating element or a clogged or faulty intake valve.

It is quite possible to fix this breakdown on your own. First, the power plug is removed from the socket, after which the functionality of the heating element is checked. The fact is that if the heating element is damaged, many functions of the washing machine can be blocked. If the item is found to be defective, it must be replaced.

In case of a possible clogging or malfunction of the inlet valve, you must immediately close the water supply valve to the washing machine. Next, you need to find the junction of the inlet hose with the tank, disconnect it and check for clogging of the intake valve mesh. In case of blockage, the mesh must be washed. If the mesh is clean, check the inlet hose. To do this, it is lowered into any container, after which the tap opens. A weak head or a complete lack of water indicates problems in the water supply system. If the water pressure is normal, then it's all about the inlet valve, which should be replaced.

Sometimes a faulty pump or drain pump can be the cause. When pumping is not in progress, the water supply is blocked at the same time. There can be a lot of malfunctions in the pump and they all need to be checked. After that, a decision is made to repair or replace it.

The procedure for draining the water is an important final step in the washing program.If the water does not want to drain from the system of the Zanussi washing machine, this indicates serious problems that require quick resolution.

The main causes are a faulty drain pump or a blockage in the exhaust system. Sometimes, as a result of improper installation in the sewer, reverse draft occurs. The water level sensor and electronic control module may be damaged. The drain pump is the main link in the drainage system of washing machines. It is he who ensures the pumping of the waste liquid from the tank. Together with the water, various small debris gets into the pump. During operation, it will wrap around the blades and damage the pump. If cleaning does not work, the pump must be replaced.

Foreign objects can not only damage the pump, but also clog the outlet pipes of the drain system. The solution to the problem is to remove the blockage and clean the exhaust pipes.

Backdraft in the sewer is formed as a result of improper installation of the washing machine. For example, if the drain hose is placed too high, the pump starts to run at increased power. Sometimes even this power is not enough and water is not pumped out of the tank.

The level sensor detects the amount of water in the tank. This function is actively used during the draining process. When the water level reaches zero, the pump stops. If the sensor is damaged, it sends incorrect information to the electronic control module. For example, it shows zero liquid level, although the tank is still filled with water, and pumping is operating normally. Sometimes the control module itself turns out to be faulty, which coordinates and controls all processes in the washing machine, including the waste water drain.

The most common breakdowns of the Zanussi washing machine include an unclosed hatch door. Many owners of Zanussi periodically face this problem.

Failures of the mechanical part are primarily considered as the reasons. In these cases, the lid does not close at all, and when the lock is operating, a characteristic click is not heard. A similar situation occurs as a result of wear of parts and careless handling of the cover. As a result of strong slamming, the hinges are skewed and the lock does not snap into place. Sometimes the plastic door rail is deformed.

Another type of breakdown is associated with electronics. That is, the lid closes with a click, but the hatch does not electronically lock. In the event of this malfunction, the washing machine displays the corresponding error code. This breakdown most often occurs due to the failure of the blocking device, including the ingress of small foreign objects inside it. Also, the control module may be faulty.

In the absence of experience and skills in working with household appliances, it is not recommended to carry out independent repairs. Qualified specialists of the service center will be able to quickly find the cause of the malfunction and eliminate it in a short time.

It is recommended to eliminate the leak as soon as possible, since not only your own apartment, but also neighbors from the lower floor can be flooded. This can be done both independently and with the assistance of specialists.

It is recommended to do the following:

The washing machine is disconnected from the power supply. Care must be taken to avoid getting into a puddle if possible.
The water supply must be turned off using a special valve.
The water from the machine must be drained through the filter located in the lower right corner of the front panel. It is quite possible that the matter will be limited to cleaning it.

If cleaning the filter did not give a positive result and after restarting the water continues to flow from the machine, in this case, the following work must be performed:

Replace the worn sunroof seal.
Install new clamps on the pipes connected to the water supply system.If there are mechanical damages on the branch pipes, they should also be replaced.
Clean the hopper from which the detergent is supplied.
Replace worn bearings and a washing machine oil seal.

To perform complex work, it is recommended to invite service center specialists who are able to quickly and efficiently perform all the necessary activities.

Another common malfunction is the lack of water heating. This problem occurs not only with Zanussi, but also with other washing machines. In this case, the quality of washing is noticeably reduced, since the powder does not completely dissolve during washing.

The main part of the heating system is the heating element. With constant use of low-quality, hard water, it quickly becomes covered with scale and burns out. In this case, the installation of a new heating element is required. At the same time, it is recommended to check the condition of the wires responsible for powering the heating element.

Another reason that the water does not heat up during washing is a malfunction of the control module. Here, self-repair is excluded, it is necessary to involve the specialists of the service center.

The lack of rinsing is usually found somewhere in the middle of the wash. The car just stops full of water. Quite often this happens for purely technical reasons. Therefore, before contacting the service center, you need to check the condition of the drain hose, which may be kinked or pinched.

Further, it is recommended to check for a blockage in the sewer. To do this, disconnect the drain hose, put it in the bathtub and turn on the drain again. If the water is pouring out freely, then the problem lies in the plumbing.

If the initial measures did not work, then the problem lies with the washing machine itself. Before checking, the machine must be de-energized and the water drained through the drain filter.

The most common reasons for the lack of rinsing in Zanussi are the following:

Clogged filter, pipe or drain pump. It is required to check and clean all elements of the drainage system.
Drain pump defective and must be replaced.
The water level sensor is out of order. As a result, the control module does not receive the required information and does not issue the appropriate commands. This item is subject to replacement.
The control unit itself is defective. Replacement of the control board is required.

Sometimes the Zanussi washing machine refuses to spin the laundry. In this case, the following problems become noticeable:

Water leaves the tank, but the spin mode does not turn on.
The water drains off normally, but the spin mode is activated only during the washing phase, and not during rinsing.
The wash has ended, but the laundry was not wrung out well.
The washing program stops before the waste water starts to drain.

A qualified technician will determine the exact cause. This defect is associated with malfunctions of certain parts and elements:

The electronic module is completely or partially damaged.
Clogged pipe that connects the drain pump to the washing machine tank. The blockage can be found in the drain hose, siphon, or sewer.
If there is a function that determines the weight of the laundry, the reason may be its uneven position in the tub before spinning.
Blockage or malfunction of the drain pump and its filter.
Failure of brushes or motor windings.
Faulty pressure switch - water level sensor.

Repair of washing machines Zanussi (Zanussi) is a frequent occurrence. Despite the fact that these cars come off the assembly line under the sign of a foreign brand, they can also break. And often the manufacturer is not at all involved in the fact that the machine broke down too early.

External factors and improper operation are the most likely reasons for the failure of the SM.

Using the statistics of service centers, you can quickly understand which nodes and parts in the device of the Zanussi washing machine are the most vulnerable

The dependence of parts on water quality. By the way, this is typical not only for the Zanussi brand, but also for other machines. Water oversaturated with salts with strong heating is deposited with scale on the heater and other elements.
The purity of the water in our water supply systems also does not differ, so the filter systems of the machine can become clogged with dirt and rust over time. As a result, the typesetting and drainage system suffers.
Hatch lock. This is already the fault of the manufacturers: both the blocker and the sensor are slightly underdeveloped, therefore they break more often than other brands of SMA.
The heater (heating element) quickly builds up with scale. Experts believe that this is also due to the fact that manufacturers miscalculated in the selection of components from which the tubular part of the heater is made.
Drive belt. It does not differ in reliability, so every 3 months it does not hurt to check its tension and integrity. If you see signs of stretching or damage to the belt, a tightening or replacement of the knot is required.

The only good thing is that it is possible to determine the malfunction on time, since the "smart" automatic washing machine Zanussi notifies the user of problems using fault codes.

Usually a Zanussi washing machine gives out the following error codes: E11, E12, E21, E22. Let's consider the most common combinations.

Water does not leave the system - cleaning of the drain filter and checking the nozzles for blockages is required.

It is also necessary to check the performance of the pump impeller - it should rotate freely in both directions. If the stroke is difficult, the pump needs to be replaced.

Complex breakdowns should be entrusted to a professional, but easy repairs to Zanussi washing machines can be easily done by yourself.

Next, we will look at how to repair a Zanussi washing machine with your own hands.

All filtration systems need to be cleaned periodically. If you neglect this rule, then later problems cannot be avoided. If there is a blockage in any of the filters, then there are problems with the intake or drainage of water.

In SM Zanussi, it is the filler filter that is most often clogged. What to do to normalize the work of the typewriter?

Just unscrew the inlet filter - it is located on the water pipe.
If you have not installed such a filter, then you need to clean the filter mesh.

Attention! Experts advise placing the inlet filter on a pipe with a special filter cassette that softens the water.

To clean the filter mesh, proceed as follows:

Find the junction of the water intake hose with the washer body.
Remove the top cover of the CM to unscrew the valve and filter.
Disassemble the filter and rinse it under the tap.
Replace the filter.
Reassemble everything in reverse order.

Important! The device of the Zanussi horizontal loading washing machine is different from the front design, but the filter is cleaned in the same way.

By the way, pollution can accumulate not only because of the "errors" of the water supply system, but also because of the clothes that you send to the drum. From too dirty things, sand, dirt, debris, threads penetrate into the machine systems.

Craftsmen often find small coins, seeds, hairpins, crumpled checks in the drain filter. All this "nonsense" can provoke a stop in the work of the AGR.

Important! Remember to clean the filter at least every 3 months.

The problem with the UBL is a frequent malfunction of the Zanussi Aquacycle CM, but it also occurs in other models: for example, the Zanussi Easyiron.

It is difficult to tell right away why the blocker breaks down - through the fault of the manufacturer or user negligence. But there may be problems with the control board - then the blocker has nothing to do with it.

The plastic components of the sunroof locking device are unreliable and can break even if you simply slam the hatch shut with force. In this case, the metal hook will survive, but due to the breakdown of the UBL, washing will still be impossible.

The blocker is usually not repaired - it is easier to replace it with a new one. For Zanussi UBL typewriters costs about 1,500 rubles. It's a little expensive, of course, so first you should remove the old blocker to make sure it is 100% broken.

Remove the device according to the following scheme:

Open the door.
On the right you will see a small hole for the locking hook, and next to it there are two screws that hold the UBL. Unscrew the fasteners.
Remove the gasket (lip). It is held in place by a wire tie that runs in a circle along the entire elastic. Pick it up with a thin screwdriver and remove. Then remove the cuff - do it by hand, without tools, so as not to damage the delicate elastic band.
Remove the blocker by disconnecting the wires.
Carry out a visual inspection of the device and make sure that the plastic part is intact. If the plastic is broken, and the records popped out, take the device with you and go for a new one.
Show UBL in the store to sell you exactly the same.
Install the bollard in reverse order.

Important! Close the door gently until it clicks, pressing down on the edge to extend the life of the device.

As we said above, the heating element is one of the most vulnerable places of any washing machine, especially Zanussi. The washing machine with such a breakdown may give an error E05, while the water in the tank stops heating.

To make repairs yourself, you will have to disassemble the SM case a little:

Turn the machine with the front wall towards you.
Unscrew the screws from the panel to remove it.
From the bottom of the tank you will see the heater shank - it has 2 contacts and wires coming from them.
Measure the resistance with a tester. If the device shows a value close to zero, the heating element will have to be changed. The readings of a working heater will be 20-40 ohms.
To remove the heating element, unscrew the nut located in the center of the shank.
Disconnect the wiring to the heater.
Make an effort to get the heating element out of the groove. If there is a lot of plaque on it, then it could get stuck. Take WD-40 grease and lightly spray on the crevices. Loosen the old heating element and pull it towards you.
Clean the hole well.
Install a new heater, connect the wiring.
Reattach the back panel and run a test wash. If the water heats up, and the E05 code is gone, then you did everything right.

Important! When choosing heating elements for the Zanussi washing machine, buy only original parts. Don't go for cheap Chinese counterparts - they won't last you long. An unsuitable heating element can also provoke a breakdown of the control unit, and then the repair will definitely "fly into a penny."

Damage caused by the drive belt is accompanied by the fact that the motor in the washing machine does not stop working, but the drum does not rotate. To check the integrity and location of the belt, proceed as follows:

Remove the back cover by unscrewing the fasteners.
In the niche you will see the drum pulley on which the belt should be put on. The motor pulley is much smaller and must also have a belt on it.
Correct the belt if it has shifted.
If the drum does not rotate and the belt is in place, then a replacement is needed.
After adjusting or installing a new belt, refit the panel and run a test wash.

As you can see, the repair of Zanussi washing machines consists in eliminating typical failures and breakdowns. Fortunately, these malfunctions are such that you can easily eliminate them without the help of a wizard.

We only advise you not to touch the electronics. Even if you have a Zanussi washing machine circuit, in order to repair or replace an electronic module, you need special tools and relevant knowledge and experience. Do not want to provoke additional breakdowns - trust the master for complex problems.

This video may help you:

Automatic washing machines produced under the Zanussi brand have always been of high quality and low price.Nevertheless, due to long-term operation, through the fault of the consumer or due to a factory defect, the cars break down and they need to be repaired. Repair of Zanussi washing machines should begin with studying their weak points, or rather, with the most common breakdowns, which we will do in this article.

As already noted, the repair of Zanussi washing machines should begin with typical breakdowns. Most of the models of such washing machines are quite demanding on the quality of water. AND The most common consumer mistake when buying and installing Zanussi equipment is its direct connection to the water supply. The water in the water supply system is far from the best quality and we are talking not only about hard water, often rusty water with all kinds of debris flows from the tap, which very quickly clogs the filters of the washing machine.

Important! Some craftsmen, when installing a Zanussi machine, specially remove the filter from the intake valve. This is absolutely impossible to do, because dirty water can literally destroy the machine from the inside.

Hence, the first typical reason for the failure of the Zanussi washing machine is clogged filters. In addition, these washing machines are equipped with extremely unsuccessful hatch locking devices. According to experts, this is one of the most common breakdowns. In this situation, both the mechanism itself and the sensor breaks down.

As in any other automatic "washing machine", the ten is broken in the Zanussi technique. Hard water should be considered one of the main reasons for such a breakdown, although some experts also talk about unsuitable materials from which the heating element tube is made. They say that this metal attracts scale even more. And finally, the last weak point of Zanussi washing machines is the drive belt. It is recommended to check the belt at least once every 4 years and, if necessary, tighten or replace it.

Periodically, all the filters of the washing machine need to be cleaned, if this is not done for some time, then you may encounter a problem. If there is a blockage in one of the filters of the washing machine, the household appliance either does not have the ability to collect water for washing, or does not drain it. Specifically, in Zanussi washing machines, the first option is more common. What can be done?

Unscrew the inlet filter located on the water pipe and clean it.
If the inlet filter was not installed, it means that a blockage has formed on the inlet valve filter (in the place where the inlet hose connects to the machine). Remove the top cover of the washing machine and unscrew the inlet valve and filter.
We unscrew the filter and thoroughly rinse its cuff and mesh from dirt, then twist the filter with the inlet valve and put it in place, then close the top cover of the machine.

The "delicate" inlet filters of the Zanussi washing machine create many problems, but they protect the internal units from damage due to the ingress and accumulation of foreign objects and debris brought along with the water. Experts recommend installing an inlet filter with a water softener cassette directly on the water pipe.

Dirt in the washing machine can not only accumulate from tap water, but also from clothes. With clothes, not only sand and pieces of dirt get into the car. The peel from seeds, coins, hairpins, buttons settles in the drain filter. All this at one moment can stop the work of the machine. Experts recommend every time after 2-3 washes to clean the drain filter with your own hands, preventing it from getting littered.

Note! Before washing, be sure to check the pockets of items that you put in the drum of the Zanussi, foreign objects can damage the internal parts of the "home assistant".

The device that locks the hatch of the Zanussi washing machine may break due to careless handling by the user, factory defect, or due to wear. The main problem arises with the counterpart of the device. Its plastic part that holds the plates is rather "flimsy" and breaks if you close the hatch very abruptly and forcefully. In this case, the hook-to-eye remains intact, since it is made of metal, and the blocking device breaks, making washing impossible. How to fix a breakdown with your own hands?

In this case, it is almost impossible to repair the device blocking the hatch, you will have to change it. Its average cost is about $ 30. It is quite expensive to purchase such spare parts for future use, so you first need to remove the old device in order to be 100% sure of its malfunction, and only then “go shopping”. How do I remove an old device?

We open the hatch cover wide open.
To the right of the hatch there is a hole for a locking hook and two screws holding the hatch locking device, they must be unscrewed.
Next, we pry on and remove the clamp that holds the hatch cuff (a large elastic band located around the hatch of the washing machine). It is most convenient to pry the clamp with a screwdriver, because it is quite thin and fits snugly, you cannot pick it up with your fingers.
After removing the clamp, we take out the cuff itself. You need to pull it out with your fingers.
We put our hand between the front wall of the washing machine and the edge of the drum and take out the locking device.
We examine it visually, make sure that the plastic part is broken, and the plates have popped out, we get together and go to the store with the old device.
We show it to the seller, buy the same new one, come home, and install it in place of the old one. Problem solved!

Note! "Hit" each time for $ 30. this is an overhead, so treat your Zanussi washing machine as carefully as possible. It is better to close the hatch carefully, and then press down on its edge until it clicks, this way a gentle and safe fixation of the hatch cover is achieved.

Teng is the weak point of all washing machines that have to work in conditions of using water with a high content of mineral salts. Some companies are trying to protect the heating elements of their cars with special polymer coatings. For example, the Samsung company five years ago announced heating elements with a polymer coating, which supposedly repels scale. Their idea failed miserably, because scale on their heating elements formed in the same way as on others, without coating.

If the heating element of the washing machine breaks down, then the water in the tank stops heating up, and the system may give an error E05. In washing machines The Zanussi Teng is located at the back of the tank, so you will need to remove the rear wall to get to it. We need to first check the heating element for operability, if it does not work, then it must be removed and a new unit installed. How it's done?

We unscrew the bolts holding the back wall of the washing machine body, remove it.
In the lower part, two contacts will stick out directly from the tank, from which the wires go - this is the ten.
Take a multimeter and check the resistance of the heating element, if the device shows zero, you will have to change the heating element.
There is a nut between the contacts of the heating element, it must be unscrewed.
We remove the wires from the heating element.
Carefully remove the old heating element from the groove. It may be difficult to do this, as he got used to it over time.
Sprinkle WD-40 grease on the right and left of the contacts in the slots and pull out the old ten in a swinging motion.
Remove any limescale and dirt that you can reach through the hole, and do not forget to wipe the edges of the hole with a clean cloth.
Carefully insert and screw on the new heating element and connect the wires to it.
We put the back wall in place and check the operation of the washing machine.

Important! Buy only original heating elements made specifically for the required model of the Zanussi washing machine. There is a risk that an unsuitable heating element will burn out, "taking" the control unit with it, and repairs will become even more expensive.

"Symptoms" of drive belt problems are the motor running, not the drum spinning. In this case, washing, as you understand, is impossible. The hum of the engine cannot be confused with anything, but you should not make it idle again. What should be done if there is a problem with the drive belt?

First, inspect the location of the malfunction by removing the back wall of the washing machine.
In the niche that opens, we will see a large round drum pulley, on which the belt is put on, and at the bottom there is a small engine pulley, on which the drive belt is also put on.
If the belt is in place, but does not rotate the drum pulley, it means that it has exhausted its resource and needs to be changed. If the belt comes off, you just need to put it back in place.
We put the belt on the pulleys, put the back wall in place and check the performance of the washing machine.

Summing up, we note that the Zanussi washing machine, despite its reliability, has several typical malfunctions that consumers encounter most often. These are clogged filters, a broken hatch blocking device, a burned out heating element and a drive belt that has worked out its life. If you have a washing machine of this brand, you should have an idea of how to troubleshoot the listed malfunctions.

Despite the fact that Zanussi is a reliable washing machine, it sometimes needs repairs. Most often this happens due to a careless attitude towards her. Consider how you can fix the breakdown yourself.If you follow all points of the operating instructions, the washing machine will serve you for a long time. And if service is carried out in a timely manner and with high quality, then it will work smoothly. Unfortunately, this attitude towards technology is not always observed. Merciless exploitation without proper care leads to breakdowns. Sometimes serious enough. Only the master of the service center can deal with them.However, more simple breakdowns often occur, allowing you to repair the machine yourself. To the most widespread relate:

the drum does not spin;

the hatch does not open after washing;

water draining occurs simultaneously with its collection;

water does not flow into the machine;

water heating does not work;

leakage.

To eliminate such malfunctions with your own hands, you need a tool and experience in performing plumbing and mechanical work.Malfunctions of this kind necessarily occur once every 4-5 years. This is due to the service life drive belt... With such a malfunction, the noise of a rotating engine is clearly audible, but the drum is immobilized. To finally understand this situation, you need to remove the rear wall of the machine. The reason will immediately become clear. If the belt has slipped off the pulley, then it must be carefully put into place. If it is torn, you will have to change it to a new one.There may be such a situation: the belt is in place, the engine is running, but the drum does not rotate. It is quite possible that the belt, having exhausted its resource, simply stretched out. There is only one way out - to change. As a rule, after such a repair, the machine resumes its work.Advice. When inspecting, do not forget to check the free rotation of the drum "by hand". If it does not rotate, it is possible that the bearing is faulty.There is also such a malfunction when the wash is finished, and it is impossible to pull out the laundry - the hatch does not open. Here, most likely, the blocker jammed. To start the repair, unscrew the bottom panel and pull the cable found there. The hatch opens, we get the linen. Then we remove the hatch lock and check the integrity of the clips. If they are not broken, then you will have to go to the service center - there is a problem in the electronics. And here, without special knowledge and equipment, self-repair is impossible. If it is found that the clips are broken, the lock must be replaced.

The repair algorithm for a top-loading machine is the same, but there is a slightly different performance of parts.Important! To avoid damage to the lock, the hatch must always be closed smoothly, without slamming.Sometimes a situation arises when, simultaneously with the collection of water, it is also drained. There may be several reasons for this. One of them lies in the incorrect connection of the drain hose of the machine. It's too low. It is enough to raise it by 0.5 m, and the malfunction will be eliminated.The reason may lie in the damage to the pipe. In this case, water will flow from under the machine. This problem is not so serious. Change the pipe and the problem is closed! Everything is much more serious if the control unit is out of order. It gives a signal to turn on the drain pump at the wrong moment. Repairing the unit at home is almost impossible.Important! When inspecting the branch pipe, you need to pay attention to its possible contact with machine parts or nearby passing hoses, which should not be. If any, take corrective action.The reason for such a malfunction may turn out to be quite simple - the lack of water in the water supply system. Then we check the hose for passing water. It's easy to do. Having disconnected it from the machine, we turn on the water and see if it goes through the hose. If so, we return it to its place. If not, we find the reason or immediately change it to a new one.The two reasons considered are pretty commonplace. The third is more serious and happens quite often. This clogged filter... To clean it, you need to remove the top cover of the machine and disconnect the filler valve. It is located at the point where the hose enters the unit body. By removing the valve, you will gain access to the filter. It remains to disassemble and clean it. Then reinstall everything in reverse order. This cleaning is often enough to restore the machine to work. If, after the repair, water still does not flow, then the problem is in the valve itself or in the water level sensor. It remains to check their performance. The repair here will be to replace them.Advice. Clean the inlet and outlet filters as often as possible to avoid clogging.Such a breakdown is rare. If you have an ordinary tester at hand, and you have knowledge of how to measure resistance, then you can safely proceed with the repair. Having removed the back wall of the car, you need to measure the resistance of the heating element. It is located at the bottom of the tank. A resistance of 30 ohms indicates its serviceability. If there are deviations, the heating element must be replaced. If it did not help, further do-it-yourself repairs are inappropriate.Water leakage problems are a big nuisance, but they are fairly easy to fix. Usually this phenomenon provokes a weakening of the seals. A simple replacement of the gaskets at the hose connections will be enough to restore the machine's functionality. It is somewhat more difficult to eliminate the leakage of the hatch seal. You have to first remove the seal retaining clamp. This operation is easy if you gently pry it off with a screwdriver. Replacing and installing a new seal is usually straightforward.In order to repair a Zanussi washing machine at home, you need to understand electrical engineering and plumbing, have a special tool and simple measuring instruments. In this case, success will be assured.

Next, we act according to the situation:

If the belt has slipped off one of the pulleys, it must be reinstalled.
If there is a break in the belt, you need to purchase and install a new one.
If the belt is intact and in place, but does not transmit rotation due to slippage, then it has exhausted its resource and must also be replaced.

If, upon inspection, you find that the electric motor pulley does not rotate, then there is a more serious breakdown and you need to contact the service center.

If the bollard is jammed, the hatch can be opened using the emergency cable by pulling it towards you. You can find it behind the bottom panel (you need to unscrew it), to the right, near the filter. The cause of the malfunction lies in the electronics, so you will have to contact a workshop.

The latches that hold the hatch closed are made of fragile plastic, so they often break.

To make sure that this is exactly the case, the lock must be disassembled:

after opening the hatch, unscrew the two screws with which the lock is screwed to the body;
remove the hatch seal (cuff), having previously removed the clamp holding it (you need to pry it off with a screwdriver);
after removing the cuff, the lock can be pulled out.

If the plastic parts of the mechanism are indeed broken, a new lock must be purchased and reinstalled.

To make the lock last longer, close the hatch as gently as possible.

The situation when, simultaneously with the collection of water, it is discharged through the drain hose (before the drum begins to rotate) may be due to the low location of this hose. Its free end should be raised by 50 - 70 cm.

Self-draining will also take place if the drain pipe is damaged, only in this case the water will flow not from the hose, but from under the machine.

More serious reasons are faults in the control module or level sensor that mistakenly turn on the drain pump.

We are looking for the cause of the malfunction:

First you need to make sure that the water is not turned off.
Next, you need to check the throughput of the filling hose by disconnecting it from the machine and turning on the water supply.
If the water flows through the hose properly, put it back in place and check the condition of the filter. Together with the priming valve, it is located where the hose enters the unit body. After removing the top cover, the assembly (valve + filter) must be unscrewed, after which the filter can be disassembled and cleaned.

Cleaning the filters, both inlet and outlet, must be performed regularly, without waiting for problems.

If the water supply has not resumed, it is necessary to check the operation of the priming valve. The resistance of its winding should be 3.75 kOhm, and when the voltage indicated on the case is applied to the contacts, the device should open. The defective valve must be replaced.

This problem can also signal a breakdown of the level sensor or clogging of its tube.

In many cases, the owner of the washing machine can repair it themselves. Do-it-yourself Bosch washing machine repair - an overview of the main types of breakdowns and methods for their elimination.

What criteria should be considered when choosing a shower stall, read in this topic.

Breakdown of heating elements, bearing wear, failure of the control unit - these types of malfunctions in washing machines are the most common. Here https://my.housecope.com/wp-content/uploads/ext/740/cancliz/mnogokvartirnyie-doma/santehnika/stiralnaya-mashina-indezit-neispravnosti-remont-svoimi-rukami.html you will learn how to fix it yourself breakdowns of cars Indesit.

The first step in such a situation is to check the serviceability of the engine and the integrity of the power supply circuit.

It will be difficult to do this without sufficient experience, so it is better to contact the service center.

Here, if necessary, they will check the correct operation of the control module circuit - perhaps it is it giving the device incorrect commands.

Most often, the cause of such failures is the breakdown of the heating element - due to natural wear and tear or due to fouling with scale. Follow these steps:

After unscrewing the fasteners, remove the back panel of the case.
Check the resistance of the heating element with a multimeter (its shank with the wires connected to it protrudes from the tank in its lower part). At room temperature, the meter should read 30 ohms.
If the resistance is different from normal, the heating element must be replaced. The wires are disconnected from it, and then the nut located between the contacts is unscrewed. The heater can then be pulled out. This should be done with care, gently rocking the element and not applying excessive force. If the heating element is stuck and does not give in, you need to soften the scale with WD-40 liquid. After dismantling the heater, its seat must be cleaned, after which it will be possible to install a replacement. The new heating element must correspond to the given model of the washing machine. Heating element from another model can burn out, moreover, together with the control module.
If the resistance measurement showed that the heating element is working properly, you need to check the condition of the temperature sensor. Its performance is also verified by measuring the resistance. At room temperature, it should be 5.7 - 6.3 kΩ.

The reason may lie in the "sticking" of the contacts of the heating element relay located near the control module.

If water is found under the washing machine, the following items should be checked:

Gasket at the connection of the filling hose. If excessive wear occurs, it must be replaced.
Hatch seal. Over time, this element can deform or crack. To dismantle a worn cuff, it is necessary to remove the clamp holding it. It fits snugly enough, but if you pry it off with a screwdriver, it comes off quite easily.
Drain connection or where the drain hose is attached to the pump. If there is damage in this area, water will start to seep out at the same time as filling the machine. A damaged part - hose, pipe or pump - must be replaced.
Tank of the car. Leaks can be caused by its depressurization.

In the latter case, you will need specialized equipment for repairs, so you will have to contact the service center.

The machine itself informs the user of some breakdowns by displaying a special alphanumeric sequence on the display - an error code. Here are some of them:

E11 - insufficient water supply during washing. As already mentioned, you need to check the water inlet path, filter and valve.
E13 - there is a water leak into the sump.
E21 - problems with water drainage. Most likely, you need to clean the drain filter. Together with clothes, sand, seed husks and other small debris, buttons, pins and other small objects can get into the machine, therefore it is recommended to clean the drain filter after every 3 washes. If this measure did not give a positive result, it is necessary to check the operation of the pump. Its winding resistance should be approximately 170 ohms.
Codes E23 and E24 speak of a malfunction of the drain pump control semiconductor in the control module.
E35 - the water level in the tank has exceeded the permissible threshold. Most likely, the reason is a breakdown of the level sensor or a clogged tube.
E41 - E45 means a malfunction of the hatch lock or its blocking elements.

A washing machine breakdown is not so uncommon. Some brands of units have their own weak points. Washing machine Kandy - DIY repair of basic faults, read on.

We will analyze the types of mixer taps and the features of their device in this material.

Loud noise when the drum rotates at high rpm may be due to the following reasons:

The position of the machine is not strictly horizontal.
The drum is underloaded, as a result of which the center of gravity of the laundry has deviated from the center of rotation (strong vibrations will occur at high speeds).
One of the bearings is broken.

Bearings in Zanussi machines can be replaced by yourself. This is done like this:

Having completely disassembled the machine, you need to remove the tank with the drum.
After removing the drum pulley and unscrewing several bolts around the perimeter of the tank, the latter must be disassembled into two parts.
Using careful hammer blows through a wooden lining, you need to knock the drum axle shaft out of the bearing assembly in the rear half of the tank.
Next, using a puller, the bearing itself should be removed along with the oil seal.
The drum axle shaft and bearing seat must be thoroughly cleaned.
In place of the old bearing, a new one is installed, while its oil seal is stuffed with special grease.

Having lubricated the axle shaft and the inner ring of the bearing, the drum and the rear part of the tank are again assembled into a single unit, after which both halves of the tank are fastened, having smeared the junction with a sealant.

In some models of Zanussi washing machines, the bearing assembly - the so-called caliper - is unscrewed.

After removing the drive belt, you need to dismantle the drum pulley (it is held by a screw). Next, you need to disconnect the grounding plate and unscrew the caliper by turning it to the right.

The caliper on the side opposite to the pulley (in machines with top loading) is unscrewed in the opposite direction. The direction of rotation at each node is indicated by arrows labeled “Open” and “Close”. After installing a new caliper, the unit is assembled in the reverse order.

To keep the screw holding the pulley securely, the threads should be coated with Loctite before screwing in.

Video (click to play).