In detail: do-it-yourself repair of hp c4283 inkjet printers from a real wizard for the site my.housecope.com.
Received for repair a faulty HP Photosmart C4283 with messages: device carriage jam. deputy. in the carriage; cartridge is damaged or missing.
The message “cartridge damaged or missing” is simply a mockery of the user of the HP C4283 printer. In fact, the HP Photosmart C4283 software developers want to force the user to buy a new cartridge. You can check the health of the cartridge by performing a reset through the service menu.
Turn on the MFP, press the Cancel (X) button, then the power button, release both.
Go to the HP Photosmart C4283 service menu. The printer will ask for a code.
Press the buttons Blue, Green, Gray and enter the submenu. Next, the gray button scrolls through the menu, and the green one selects.
Scroll to Information Menu, select, scroll to checksum for relock data, select. The code appears. We confirm. Then press X 3 times. The screen will display the message "printing an alignment page", confirm and wait for completion.
The printer starts printing.
Second untested method:
We enter the service menu according to the above method, select Resets menu, in it Partial Reset and OK. If it doesn't help, go back to the Resets menu, select Semi Full Reset, OK. Then again Resets menu, Partial Reset and OK.
If the MFP says “Jam in device carriage. deputy. in the carriage ”, then repair is required, which begins with disassembly.
Instruction. First, remove the side covers by removing 4 screws.
We lift the scanner, disconnect the cables.
Carriage jams are often caused by a faulty drive shaft gear.
 |
Video (click to play). |
We replace the gear and put the MFP back.
To switch the MFP to Russian, you need to do a Languadge / Country Reset.
To do this, you need to enter the service menu, as indicated above, select Reset Menu, select Languadge / Country Reset, press the green button. Then turn on the printer, it will invite you to select a language and region, select Russian and Europe.
DIY printer repair - what you can do at hometo save money on calling a master or sending a printing device to a service center? Not all problems can be solved on your own, but there are things that you can diagnose yourself. However, do not forget that a serious malfunction can be identified and corrected exclusively by the hands of a specialist with extensive experience and specialized tools for carrying out the corresponding work. Repair of printers by service center engineers YauzaOrgService guarantees high quality and speed of service delivery without overpayments. But what will it be possible to reveal at home?
• The most common cause of printer breakdown, whether Canon, HP, Epson, Oki, Samsung, Ricoh, Brother or Xerox, is to clean the machine irregularly. In simple words, it is dirt. It often leads to imbalance of the case, noise appears during operation, or paper picking stops. That is why it is recommended to clean the printing device at regular intervals and only when the equipment is off. But you need to know about the prohibition of the use of alcohol - for wiping we take only ordinary distilled water, a new sponge and cotton swabs.
• We check the correctness of operation: the printer must be plugged in, the tray is pushed in firmly to the very end, the sheet guides are set, the cartridges are correctly installed and there is no jam of foreign objects in the machine.
• Do not be afraid to inspect the inside of the equipment for paper debris or scraps, toner spills, plaster, sand, or water.
• Check the cartridge is full, if it has run out.
• If printer malfunctions are displayed as errors on the computer monitor, be sure to write down the code, number, or information on the screen for transmission to the wizard.
• Pay attention to the print quality of documents, whether there are additional streaks or spots, what color they are.
• Track the frequency of paper chewing.
• Listen for extraneous sounds, crackles, noises when printing.
Having considered all the above nuances, which often lead to the stoppage of the printer's functioning, you can speed up the process of correcting a malfunction, replace the repair procedure with preventive maintenance and save money on a specialist visit. Evaluation of the state of the equipment operability, the exact formulation of the problem and the listing of the problems that have appeared will allow the foreman to respond to the request as quickly as possible, since he will present the amount of work in advance. If this is not a serious breakdown and the situation allows you to repair parts, replace components or restore work quickly - printer repair can be carried out even at the diagnostic stage. By calling the phone number or sending an application through the website YauzaOrgService - assistance will be provided with the provision of a guarantee for all types of operations and services performed.
Soldier
Group: Members
Posts: 7
User #: 8991
Registration:
11-October 14
Expert
Group: Admin
Messages: 8645
User #: 3904
Registration:
14-September 10
Soldier
Group: Members
Posts: 7
User #: 8991
Registration:
11-October 14
Expert
Group: Admin
Messages: 8645
User #: 3904
Registration:
14-September 10
Soldier
Group: Members
Posts: 7
User #: 8991
Registration:
11-October 14
Expert
Group: Admin
Messages: 8645
User #: 3904
Registration:
14-September 10
Download / Print topic
Download a theme in various formats, or view a printable version of the theme.
The HP PhotoSmart C4283 is an MFP (scanner, copier, printer), and like many modern devices it has a counter that counts the number of printed pages, after which it starts giving out a certain type of error, including "toner out, replace cartridge".
To solve the problem, it is not necessary to buy new ones, it is enough to refill all the ink cartridges, insert them back and reset them in the printer settings.
As a rule, this is a combination of several buttons and a couple of printer shutdowns, after which the multifunction printer will again see the cartridges and print color photos. You can also clean the nozzles to improve print quality (this is done in the settings).
Today, almost every family has a home printer that allows you to print documents and take photos from the comfort of your home. But, as you know, any office equipment needs maintenance and, if necessary, minor repairs from time to time. Therefore, in this article we will tell you how to do it yourself, at home, without much money and loss of time to troubleshoot printers. For example, consider the well-known brand - HP.
As you know, the Hewlett Packard brand is very popular in Russia. Printing devices of this brand can be found both at home and in businesses and offices. The high popularity is due to the reasonable price of printers and the reliability of their work. But any, even the most unpretentious device sometimes needs maintenance.
To begin with, let's look at the typical problems that arise with the active use of HP inkjet printers and how to solve them.
The first reason for possible malfunctions is internal contamination of the printer, leading to an imbalance of the moving parts, the formation of noise during operation and knocking during the movement of the carriage.
Even an ordinary user can eliminate this problem, the printer does not have to be disassembled - it is enough to buy a special lubricant sold in electronics stores and process all moving mechanisms.
To clean the printer from internal contamination, it is better to use ordinary distilled water; the use of alcohol for these purposes is contraindicated by the manufacturer.
If during printing the text moves to the side or the carriage hits the edges of the case - the reason may be dusty or broken positioning "ruler", along which the carriage is oriented in space.
In the first case, you just need to disassemble the back of the printer, get to the shaft and remove the ruler, then rinse it in warm water, wipe it with a dry sponge and dry it, then put everything back in the reverse order (remember how the ruler was originally located) Turn on the printer and check its performance. If the line breaks, it is better to contact a specialized service center.
There is also another malfunction - the carriage does not cling to the gear teeth, the motor is idling. The cause of the breakdown is simple - poor drive belt tension. The problem is solved by inspecting and correcting the tension spring on the belt gear bracket. Perhaps it is poorly fixed or simply needs to be replaced.
The next problem is jerky movement of the carriagecausing the printer to tear the paper. This is a serious malfunction associated with an imbalance in the printing mechanism - the printer shaft has lost its original correct position. To eliminate the defect, it is necessary to disassemble the printer - remove the carriage, ruler, shaft, toothed belt, clean all mechanisms by rinsing them in warm water, dry and collect everything in its original state, lubricating all friction points of the carriage and adjusting its free travel.
If your printer does not pick up the paper, for this it is worth cleaning the rubber rollers in the lower tray, and also adjusting the small spring that presses the paper against the roller.
If the printer produces a streak on the printed pages, you can safely say that the cartridge will soon run out, and to temporarily fix this problem, you just need to remove it and shake it from side to side.
If several horizontal stripes appear, you can clean the transroller yourself (black roller under the cartridge). It can be pulled out simply, but try not to touch it with your hands. You can clean the roller with cotton pads or a soft cloth, it is also allowed to use isopropyl alcohol.
Summing up, we can conclude that most printer malfunctions are eliminated by cleaning them from dirt and adjusting mechanisms even at home. Basic technical skills and patience are enough for this.
kosmas Mar 19, 2012 10:36 pm
bender Mar 20, 2012 8:37 am
kosmas Mar 20, 2012 9:04 am
kvg Mar 20, 2012 10:07 am
Serg007 Mar 20, 2012 10:13 am
kvg Mar 20, 2012 10:24 am
kosmas Mar 20, 2012 10:47 am
kvg Mar 20, 2012 11:12 am
xCooLx Mar 20, 2012 11:14 am
kosmas Mar 20, 2012 11:48 am
kvg Mar 20, 2012 12:13 pm
Serg007 Mar 20, 2012 12:15 pm
xCooLx Mar 20, 2012 12:43 pm
kosmas 09-03-07, 02:29
Armphantom Wed Mar 21, 2012 12:11 am
- Related Topics Replies Views Last Post
- CLP-365 does not rewind paper or “tired solenoid”
zkart in the forum Printers, MFPs, faxes, copiers A4 3 2227 Mikhail Nikolaev
Wed Jan 17, 2018 7:20 pm - Ricoh SP C420DN - Does not see toner, says “Add toner”
masterchip in the forum Printers, MFPs, faxes, copiers A4 4 2075 masterchip
Fri Nov 08, 2013 12:37 am - HP Deskjet F2423 pulls paper halfway in and produces an error
Sveterkom in the forum Inkjet printers 9 4682 kokubenko
Mon Jun 23, 2014 11:41 am - Kyocera FS-9530 DN - chews paper after the stove in an accordion
1 , 2STRONZY in the forum Printers, MFPs, copiers A3 21 11586 Andreyak777
Mon Apr 03, 2017 7:49 pm - HP P2035 creases paper starting from the second half of the sheet
Sveterkom in the forum Printers, MFPs, faxes, copiers A4 13 2637 sergey1986
Wed Sep 07, 2016 4:24 pm
Users browsing this forum: no registered users and 16 guests
START COPY CONFERENCE
Printers, copiers, MFPs, faxes and other office equipment:
issues of repair, maintenance, refueling, selection
Good afternoon, it is required to disassemble this model for repair in order to get to the gearbox that broke down, but it did not go further than unscrewing the side covers. Can you tell me if there is a guide or can there be an instruction, video or photo on the parsing of this device?
(0)
To begin with, a little agnostic - will you get to the gearbox, and how and how, in fact, will you repair it (the gearbox)?
And there are practically no difficulties in disassembling there. Four screws on the “sides” and a couple more (as far as I remember) “on top”. Further it will be clear.
So further it is not clear. I will change it.
(2)
What is there incomprehensible? Did you unscrew the upper screws?
I unscrewed it, but the mechanism cannot be removed, and it’s just where the gearbox is locked with something.
Hope you removed the carriage guide first ??
This MFP was bought by me several years ago. I stopped at this model about the reason for the possibility of refilling cartridges. Specifically purchased a set of refillable HP178 ink cartridges (bought HERE), as well as an OCP ink kit (bought HERE). The overall impression of the HP B110B MFP is excellent. BUT. I don’t know how ordinary users use it, I have constant problems with repairs. Once I even turned to the workshop - they told me to throw it out. I've been throwing it out for about a year now. Super masters do not want to work even for money.
The main breakdowns in the HP B110B MFP are the loss of contacts in the carriage loops and loose contacts in the places where the cartridges are installed. The cost of printing is a penny. The print quality is excellent even with cheap ink. Several times I was trying to buy a new MFP, but ……
The first repair was to replace the print head. I did not find the head in Russia and ordered it from China. Who needs a head press HERE... The installation of the head was also with dancing with a tambourine. Bottom line: it works to this day and most likely the old head was also good, but the problem is in the trains on the carriage.
Here's how to quickly disassemble the HP B110B MFP.
Reason for disassembly: HP B110B MFP DOES NOT SEE BLACK CARTRIDGE.
Lift the lid of the HP B110B MFP, the head will park in the lid open position.
We unscrew 6 screws and here is the first surprise. Two screws cannot be unscrewed just like that - the cover of the SCANNER UNIT interferes.
In addition to the screws, the side covers sit on 3 more latches on the bottom of the printer.
On the left side, after removing the cover, disconnect 2 white and black cables.
On the right side, unscrew the stopper fixing screw.
Lifting up, remove the scanner and put it to the side. We don't need it yet.
Now we have access to 2 problem screws. We wrap them up and remove the lid.
This is what the HP B110B MFP looks like from above. The head, carriage and cartridges are already available to us.
If the problem is in the loops, then we already have access to them. Repeatedly I inserted these loops back, and after some time of work they left again.
If the problem is not in the loops, then we continue the analysis of the HP B110B MFP. We remove the cartridges. We do not leave them open for a long time. I don’t use lids, because I’m working on disassembly with my eyes closed and they don’t have time to dry out. The same goes for the head.
If you are going to remove the head train, keep in mind that there is a movable silicone stop under the train. I forgot to take a picture of him.
To remove the carriage, loosen the toothed belt tensioner.
Remove the left and right cotter pins securing the carriage shaft.
We remove the shaft by pulling it out to the right.
We can now raise the carriage. Complete freedom of action.
Checking the ribbon cable
We disassemble the carriage. To do this, release the head holder - remove 2 springs.
Remove the cover that covers the board. It has 2 latches and can be easily pry off with a screwdriver.
Unscrew 1 screw securing the printed circuit board. And we remove the fee.
Examining the board for micro cracks
Now we remove the cartridge contacts board. There are only 6 latches, 3 on each side. Spring plate keep this in mind.
We get access to the cartridge contacts board. In my case, the reason is precisely in this board. We clean up contacts
We check the moving contacts. They can be easily rearranged among themselves.
We assemble in the reverse order. The disadvantage of this assembly is that the loops are not fixed in any way. Thus, they bring unnecessary trouble to the owner of the HP B110B MFP.
This assembly - disassembly helps even if various ink system failure errors pop up:
0x19a0013
0x19a0003
0xc19a0020 and so on.
Putting the gearbox back: 
Before putting it back on the axle, coat the inner part of the gear with glue (this will help to distribute the load more evenly): 
We put the cover back in place, turn on the device and are glad that everything worked: 
If you have additional questions, you can ask them using our feedback form.
We refuel
Konica Minolta bizhub c224e; Konica Minolta bizhub 4020; Epson SureColor SC-T3200;
HP DesignJet T120; HP DesignJet T520;
Konica Minolta Bizhub C353 / C353P; Ricoh Aficio C242dn; Kyocera TK; Samsung MLT of any model; Brother TN-3330; Brother TN-3380; Brother TN-3390; HP CP5525 (Bk / C / M / Y); Xerox Phaser 4600/4620; Xerox WC5325 / 5330/5335; Panasonic KX-FAT400A7 for KX-MB1500 / 1520; Samsung MLT-D101S for ML-2160/2165 / 2165W, SCX-3400 / 3400F / 3405 / F / W / FW; Samsung MLT-D103L for ML-2955ND / 2955DW / SCX-4728FD / 4729FD; Xerox 106R02181 for Phaser 3010 / WC 3045, PC-110E (PC-110H, PC-110); PANTUM P2000 / P2050; OKI C310 / C330 / C510 / C530, OKI C321 / C322, OKI C610, OKI C3450, OKI C810; HP CF280A / CF280X (80A / 80X) for LaserJet Pro M401a / M401d / M401dn / M401dw MFP M425dn / M425dw, Xerox Phaser 6000/6010; Xerox Phaser 6500/6505, Brother TN-2235/2275
and other cartridges
We are stitching
Samsung SL-C460 (SL-C460W, SL-C460WF), CLX-3300/3305/3307 (all versions of devices), SF-650, SF-760P, CLP-360/365 (all versions of devices),
DELL-1130N / 1133 / 1135N, Xerox 3100MFP, including versions 2.07m and 2.07t, Philips 6020/6050/6080, OKI MB260, KM PagePro 1480 / 1490MF, Samsung SCX-3205W, Samsung SCX-4623FN, Samsung SCX-4833FR, Samsung ML-1670/1671/1675/1676/1677, Samsung ML-2580 / 2580N, Samsung ML-3310ND, Samsung ML-3710ND, Samsung CLX-3185fn, CLP-620ND, Samsung CLX-3180FN / 3185FN / 3185W / 3185FW
and other devices
We do
Soaking the print head of Epson / Canon printers from any state; express production of seals and stamps, as well as any printed matter; installation of CISS on printers / MFP Epson / Hp / Canon / Brother; repair and maintenance of laptops and netbooks,
and much more
We are selling
Compatible cartridges for Xerox MFP 3100 / S and Xerox WC 3210/3220;
OCP, InkTec, InkMate inks - including for the Epson Pro line; CISS Epson S22 / SX125 / SX420W / SX425W;
universal compatible cartridges for HP CB278A / CB285A / CB436A / CB435 / Canon 728; compatible Canon FX10 cartridges; the whole range of inkjet cartridges Canon / Brother / Epson, produced by InkTec, Korea; refill kits for inkjet cartridges Hp / Canon / Brother / Epson
and much more
Here's how to troubleshoot installation, configuration, and use issues.
Many problems occur when the machine is connected to a computer using a USB cable before the software for the machine is installed on the computer. If the machine was connected to your computer before prompting to do so was displayed on the software installation screen, follow the steps below.
1. Disconnect the USB cable from your computer.
2. Uninstall the software (if already installed).
3. Restart your computer.
4. Turn off the machine, wait one minute, and then turn it on again.
5. Reinstall the program.
Do not connect the USB cable to your computer until instructed to do so on the software installation screen.
If the installation is incomplete, or if the USB cable was connected to your computer before the installer prompts you, you may need to uninstall and then reinstall the software. Do not manually delete program files from your computer. Be sure to remove the files using the uninstaller that was installed with the software.
1. On the Windows taskbar, click Start, Settings, Control Panel.
2. Double-click Add or Remove Programs.
3. Select, then click Change / Remove.
Follow the instructions on the screen.
4. Disconnect the device from your computer.
5. Restart your computer.
You must disconnect the device before
restart the computer. Do not connect the machine to a computer if the software is not installed.
6. Insert the CD into your CD-ROM drive and run the installer.
7. Follow the instructions on the screen and the instructions in the Setup Guide that came with your machine.
After the software installation is complete, the Digital Imaging Control icon appears in the system tray of the Windows taskbar. Double-click the HP Solution Center icon on your desktop to verify that the software was installed correctly. If the basic icons (Scan Picture and Scan Document) are displayed in the HP Solution Center, the software is installed correctly.
Use this section to troubleshoot problems you may encounter while installing your hardware.
Cause: The machine is not properly connected to the power source.
Make sure the power cord is securely connected to the machine and the power adapter. Plug the power cord into an electrical outlet or surge protector.
If the machine is connected to a surge protector, make sure the filter is turned on. Or plug the unit directly into a power outlet.
Check the outlet is working. To do this, connect a known working device to it and make sure that it works. If the device does not work, the outlet may be defective.
When connecting the machine to a switched outlet, make sure the switch is on. If it is on but the machine does not work, the outlet may be defective.
Reason: On button. was pressed too quickly.
Solution: The machine may not respond if you press the On button. too fast. Press the On button. once. It may take a few minutes to turn on. If you press the On button at this time. again, the device may turn off.
Cause: The USB cable was connected before the software was installed. Errors often occur when the USB cable is connected before prompted.
Solution: Before connecting the USB cable, you must install the software that came with your machine. When installing the software, do not connect the USB cable until the prompt appears on the screen.
After installing the software, connecting your computer to the machine using a USB cable is very simple. Connect one end of the USB cable to the back of the computer and the other to the back of the product. You can connect the cable to any USB port on the back of your computer.
For more information on installing the software and connecting the USB cable, see the Installation Guide that came with the machine.
The machine does not print
Solution: If there is no connection between the machine and the computer, do the following.
Check the On indicator. on the front of the machine. If the indicator is off, the device is turned off. Make sure the power cord is securely connected to the machine and plugged into a power outlet. Press the On button. to turn on the device.
Make sure paper is loaded in the input tray.
Make sure there are no paper jams in the machine.
Check if the carriage is blocked.
Open the cartridge cover to access the carriage. Remove all objects blocking the carriage, including packing materials. Turn the machine off and on again.
Make sure the machine's print queue is not paused (Windows) or stopped (Mac). If checked, select the appropriate option to resume printing. For more information on accessing the print queue, see the documentation that came with the operating system installed on your computer. Check the USB cable. If an old cable is used, it may be defective. To test if the USB cable is working properly, connect it to another device. If problems arise, you may need to replace the USB cable. Make sure the cable length does not exceed 3 meters.
Make sure your computer supports USB. Some operating systems, such as Windows 95 and Windows NT, do not support USB.
Check the connection between the machine and the computer. Make sure the USB cable is securely connected to the USB port on the back of the machine. Make sure the other end of the USB cable is connected to a USB port on your computer. After the cable is properly connected, turn off and on the device again.
If the machine is connected using a USB hub, make sure the hub is turned on. If the hub is on, connect the machine directly to the computer.
Check for other printers or scanners. You may need to disconnect other devices from your computer.
Try plugging the USB cable into a different USB port on your computer. After checking the connections, restart your computer. Turn off the machine and turn it on again.
If the device does not respond to commands, turn it off and on. Start the print job.
Reinstall the software for the machine if necessary.
If there is a paper jam in the machine, open the rear door first. If there is no jammed paper in the rear rollers, open the front door.
Clearing a paper jam from the rear door
1. Press the tab on the left side of the rear door to release it from the latches. Remove the door by pulling it away from the machine.
2. Gently pull the paper out of the rollers.
If the paper tears when you pull it out of the rollers, remove any torn pieces of paper from the rollers and wheels inside the machine. If the torn pieces remain inside the machine, it will cause paper jams again.
3. Replace the rear door. Press down gently on the door until it clicks into place.
4.Press Start Black Copy or Start Color Copy to continue printing the current job.
1. If necessary, tilt the input tray down to open it. Lower the access door.
2. Gently pull the paper out of the rollers.
If the paper tears when you pull it out of the rollers, remove any torn pieces of paper from the rollers and wheels inside the machine. If the torn pieces remain inside the machine, it will cause paper jams again.
3. Close the access door.
4. Press Start B&W Copy to continue printing the current job.
a source of up-to-date information and assistance of specialists, which provides the following opportunities:
Quick access to qualified support specialists.
Software and driver updates.
Useful information about the machine and troubleshooting common problems.
Proactive device updates, support notifications, and newsletters available upon registration. 3. Call support.
All of us, from time to time, are faced with breakdowns of one or another technique. Many even have personal experience in eliminating minor faults on their own. This article will discuss the possible causes of printer malfunctions and how to fix them.
A very part of the cause of the malfunction can be a software failure or a slight mechanical deviation, which can be easily eliminated on your own, without the help of a specialist from the service center. Of course, all faults cannot be eliminated on your own. In some cases, you will have to contact a specialized service center, because there are breakdowns that can be diagnosed and fixed only if you have special equipment and qualifications (you can read more about the repair of printers and other office equipment here.) But still, in most cases, breakdowns printers are typical and "heal" themselves.
It doesn't matter what company your printer is: Samsung, Epson, HP, Lexmark, Sharp, Ricoh, they are all about the same.
- First of all, check all connections. The printer must be powered on and connected to the computer. Notice if the tray is tightly closed and there is paper in it, and if the ink cartridge has run out. Pay attention to the paper guides to see if the paper is jammed.
- Check the software, there may be a software problem and need to be reinstalled. If, when trying to use the printer, a window with an error number pops up on the monitor screen, write it down on a sheet and look on the Internet what this means and how to fix it. It so happens that some dll file has flown off and it is enough just to reinstall it. There you will also find detailed instructions on how to install it.
- The most common cause of a malfunction is dirt on the mechanical parts of the printer. The first thing to do is to unplug the printer, open the cover, remove the cartridge and inspect all accessible mechanisms and gears for foreign objects. It is possible that the paper sheet was chewed and when it was removed, pieces of paper remained. If there is contamination, then take cotton pads, and slightly moisten them with water, carefully remove the contamination. For cleaning in hard-to-reach places, you can use ear sticks to help you. Never use detergents or liquids containing alcohol.
- It will not be superfluous to listen to extraneous noise during the operation of the printer, this may signal the wear of any part or gear.
In most cases, the malfunction is associated with the reasons listed above and can be eliminated by yourself. Even if it is not possible to eliminate the malfunction on your own, identifying them on your own will save money and time on diagnostics. And the master will already have a rough idea of what the problem is and will be able to take all the necessary tools and parts with him.
If you happen to have a broken HP PhotoSmart C4283 printer, do not rush to call the wizard or take the technician to the service center. The Rapid company offers a wonderful service.We advise clients by phone completely free of charge and, thanks to many years of experience, can determine the causes of problems and suggest solutions for their elimination, if possible. Also, the master will determine the cost of repairs and terms. Usually, in our service, repaired printers do not lie more than three days (subject to availability of spare parts). In this case, you get diagnostics of the HP PhotoSmart C4283 printer free of charge, by phone.
Print type - color
Printing technology - inkjet
Repair consultation - FREE!
Rapid Company offers a courier service for those who need to deliver a printer. After completing the application, the courier will come to you as soon as possible, namely on the day of contact, and in the worst case, the next day. Payment is made upon completion of the order.
Price:
from 500 rubles
Diagnostics of the printer is the determination of the breakdown of the printer and the identification of the causes of the malfunction, and in the future, the repair. A lot depends on the correct diagnosis. Firstly, the further performance of your printer. Secondly, the definition of the funds invested in the apparatus. Thirdly, saving you money from unnecessary (incorrect) repairs. That is why the initial diagnostics of the HP PhotoSmart C4283 printer is required, which our masters can do quite easily based on their experience. In case of repairing the printer with us, the diagnostics are free. If it is inexpedient to repair the printer, diagnostics are paid. Also, diagnostics are paid if the client refuses to repair the printer in the future.
Price:
· RUB 300
Printer maintenance is more than lubricating assemblies and rollers, cleaning and lubricating the paper path and other accessories, and cleaning the scanner glass and ADF (if applicable). The cost of printer maintenance may differ from the initial set price, depending on the complexity. You can carry out the preventive maintenance of the HP PhotoSmart C4283 printer purposefully, that is, separately, or at the same time, in the event that you handed over the printer for repair.
Price:
clarify
While repairing the printer, HP PhotoSmart C4283, you can order a refill of the black cartridge HP 140, 140XL black... When refueling, the print head of the cartridge is cleaned and then the cartridge is refilled.
Price:
´200 rub.
Cartridge refilling
While repairing the printer, HP PhotoSmart C4283, you can order a refill of a color cartridge HP 141, 141XL color... When refueling, the print head of the cartridge is cleaned and then the cartridge is refilled.
Price:
´200 rub.
Having bought a flushing fluid, you can independently clean the HP 141, 141XL, HP 140, 140XL cartridges without leaving your home, thereby saving you a lot of money on repairs. IMPORTANT! - If you have no knowledge of printer repair, do not try to repair using the Internet. Yes, there are solutions, but in general terms, and each breakdown is always individual for each printer.
Volume: 100 ml.
Price:
˻300 RUB
Having bought ink, you can refill HP 140, 140XL cartridges yourself, without leaving home, thereby you save a lot of money on refueling. Volume: 100 ml.
Price:
˻300 RUB
Having bought ink, you can refill HP 141, 141XL cartridges yourself, without leaving your home, thereby saving you a lot of money on refueling. Volume: 100 ml.
Price:
˻300 RUB
Having bought ink, you can refill HP 141, 141XL cartridges without leaving home, thereby saving you a lot of money on refueling. Volume: 100 ml.
Price:
˻300 RUB
Having bought ink, you can refill HP 141, 141XL cartridges without leaving home, thereby saving you a lot of money on refueling. Volume: 100 ml.
Price:
˻300 RUB
|
Video (click to play). |
Printer power supply unit HP 0950-4401, 0950-4491, 0957-2178, 0950-4491, 0957-2094, 0950-4401, 0957-2146, 0957-2176, (32v-700mA, 16v-625mA, 3-pin)
Price: 1000 rub.
