In detail: do-it-yourself bark beetle repair from a real master for the site my.housecope.com.
All rules for applying bark beetle
To begin with, let's decide that we are not talking about that bark beetle, which is an insect and eats your floors, but about a special textured plaster. Basically, such plaster is applied to facades, and less often indoors. But before you start using this composition for its intended purpose, you should familiarize yourself with the rules for applying this composition. In principle, there is nothing complicated and the technology of applying plaster bark beetle is simple, but it is still worth knowing some of the nuances, or even better, watch the video lesson that you will find just below this article on the website for renovating an apartment on your own. The work itself consists of several stages:
1. Primer. 2. Application to the surface of the bark beetle. 3. Grouting the bark beetle.
In order to learn how to properly apply this textured plaster, you can practice on the back wall of the facade of your house, using several bags of bark beetle.
It is best to choose autumn or spring to work with this mixture. You can do this in the summer, but it is still worth knowing that the plaster will dry quickly, and therefore you will need to work quickly. So in order to learn best, of course, choose a neutral season, that is, spring or autumn.
But before you start work, you need to prepare the necessary tools for the correct application of the bark beetle plaster:
1. Tray and roller, which are needed for the primer. 2. Drill with a whisk. 3. Bucket. 4. Trowel and trowel for applying plaster. 5. Splatter. 6. Grater. Preferably plastic.
Video (click to play).
Now let's get down to work. First what needs to be done is prime your wall ... See our article on which primer to choose, types of primers. To do this, you must use a special paint-primer. Choose a white soil. All this is necessary so that the black color of the wall in the furrows does not shine through. If you have chosen an expensive paint-primer, then you can walk along the wall with it, just once, since it has a very thick and high-quality consistency. If your primer is cheaper, then apply it to the wall in several layers. All this is because cheap primers are more liquid, and in order to achieve the desired result, it is necessary to apply about two or three layers to the wall, that is, until your wall acquires a uniform white color. After you have applied the primer, you should wait until it dries, otherwise you risk wiping it black while working with the bark beetle.
The next stage is the application of the bark beetle ... To do this, you need to mix the plaster in the bag, as indicated on the bag of the bark beetle you have chosen. But it is worth remembering that you do not need to knead too much, as you may not have time to work out all the material, and it will simply dry out. The bark beetle should be applied with a stainless steel spatula. Do everything neatly, in an even layer. Remember that the thickness of the layer should be in the size of the fraction of the bags of your plaster. A very important tip for you may be that it is worth applying the plaster in rows horizontally or vertically. During the application of one row, you should capture the entire height or width of the wall, then the result will be uniform and accurate.
If your wall is too high or wide, then you should limit in advance the level to which you can reach, and just as carefully apply the plaster, but already on the designated areas.This means that it is worth dividing the wall in half with masking tape and first reaching it, and the next day, tearing it off and gluing it to the treated part, apply the bark beetle in the same way to the second half of the wall.
After you have applied the bark beetle, you need to wait ten or twenty minutes for the plaster to set. It all depends on the weather, the warmer it is, the faster it will begin to grab. In principle, you can test this using a plastic grater prepared in advance. If the plaster does not stick to it, then you can safely proceed to the next stage of work, that is, to grout the bark beetle.
Bark beetle grouting technology just as simple and done with the same plastic float. To do this, you need to decide on the pattern, if you want to see the "rain", then you should wipe vertically - up and down. If you like the lamb pattern, then do it in a circular motion. After you rub the first row, you should immediately start applying the second row, while you need to spray the joints between the rows with water so that the transitions are not visible. The video below clearly demonstrates this.
If it happened that you did not have time to wipe the plaster and the bark beetle dried up, then use a spray gun, and the missing drawing can be completed with a nail.
As for painting, it is best to paint the bark beetle with a roller or brush in the furrows, and at least two layers. To find out how much plaster you need, an online calculator of the amount of plaster will help.
VIDEO
VIDEO
Very often, a well-known and affordable method is used for finishing the facade - plastering. Despite the fact that expensive compositions or budgetary ones are used, repair work still needs to be carried out.
Plaster repair can be reduced to trivial staining if the dye in the solution was of poor quality and quickly faded under the influence of the sun. But sometimes it is necessary to make a more complex restoration - to repair cracks or exfoliated areas.
There is nothing complicated here, it is enough to purchase paint for the facade, which can be applied to the plaster in the required amount. If you plan to radically change the color, then calculate the quantities for 2 or even 3 layers. But when choosing, be careful and consider what kind of plaster was used to decorate the facade earlier.
The work process is as follows:
Cleaning the facade from dust and stains, if any.
Primer can be applied.
Wall covering with 1 coat of paint. To do this, you can use a wide brush, roller or spray gun. The latter option will significantly speed up restoration work, but such an apparatus will be difficult to find. Therefore, the best option would be to use a roller.
Once dry, 1 layer can be applied 2.
It's a little more complicated here. To make repairs to plaster walls with your own hands, you will have to work longer.
First, you should purchase the same plaster that was used to decorate the facade. If a dry mix was used, it is not necessary to knead a large amount. Do as much as you can to deal with one bulky or a few small imperfections.
Secondly, you need to carefully examine the surface of the walls. This will help to assess the volume of repair work, and also to determine whether, in addition to cracks, there are also exfoliated areas. If such imperfections are present, then in that place the layer will swell. To check the suspicion, you need to knock with a rubber or wooden hammer, and the handle of a spatula will do. If there is a defect, a dull sound will be heard.
Third, the place of work should be well prepared. Cracks are cleaned of dust and dirt and treated with soil or soda solution.
While the treated area dries up, you can prepare a small amount of plastering solution.
After such preparatory work, you can begin to eliminate the shortcomings. If the layer was smooth, then there should not be any special problems in the process of repairing old plaster.
The crack is tightly filled with mortar.
The surplus is removed with a flat spatula and carefully rubbed to obtain a flat surface that does not protrude above the old layer.
Thus, all the disadvantages are handled.
After the solution has dried, the areas need to be properly sanded.
If the solution was gray, then on top of it you need to apply a thin layer of putty, then when staining, you will not have to apply the dye in several layers.
The last step in the partial renovation technology will be painting the facade. Professionals recommend, after repairing the plaster of the walls, to update the entire area in separate places. Thus, the decorative finish will look fresh, and after some time of use, the shade may change slightly. Therefore, when buying the same paint and the same color, the repaired area can stand out.
VIDEO
After the flaws were found during visual inspection and tapping, they must be removed. Plaster, which is crumbling or peeling from the base, is removed until there is a layer that adheres firmly to the wall. It is important not to miss a single piece, otherwise this method of repair work will bring bad results.
After a while, areas will appear again that spoil the appearance of the building. And this means you will need to repeat all over again. Therefore, you need to carefully inspect the facade and clearly follow certain instructions in order to properly repair the plaster.
After the old layer is removed, the area must be cleaned of dust. To do this, you can use a paint brush dampened with water or a medium pressure washer.
Dry the surface.
Treat the wall and elements of the old plaster that has remained with deep penetration soil. This is necessary so that the base does not absorb moisture from the plastering solution and to increase the adhesion of both the base and the old layer with a new composition.
Dry the surface.
Now you can start filling the desired areas with the solution. Everything is done in a standard way. The solution is taken up with a spatula and spread evenly over the surface. As in the previous version, it is imperative to ensure that the new surface is flat and does not protrude above the old layer.
After 30-60 minutes after applying a fresh layer of plaster, you need to wipe it thoroughly.
After the layer is completely dry, it is sanded and a perfectly flat surface is created.
The last stage of plaster repair will be staining. It is advisable to paint the entire facade in 2-3 layers.
In order to remove imperfections from structured plaster, and at the same time save the drawing, you will need to remember exactly how it was applied. To repair the "bark beetle" you will need to buy a specialized compound.
The preparatory stage and filling of cracks and other depressions is carried out according to the same scheme that was given above. But after the solution has set, it will be necessary to wipe it in such a way that a drawing is obtained that repeats the old one as much as possible.
If a special roller was selected to create a pattern on raw plaster, then everything should turn out quickly and easily. The main thing is to take the same tool and place it correctly so that the drawings clearly coincide. It is better to do this work in stages if there are several places with imperfections on the facade.
First, fill one area with a solution, wait for it to solidify and make a texture, and then move on to another. Otherwise, you can skip the moment when the solution lends itself to structuring.
VIDEO
It will be more difficult to deal with the texture, which was made with scrap materials. It will be difficult to repeat such a pattern.Therefore, before starting repair work, you need to practice on a separate surface or remember how the process was performed.
Amateur craftsmen who want to try to decorate their facade or walls inside the house with beautiful plaster, make the right choice, stopping at decorative plaster bark beetle, but run the risk of making mistakes that can end up with an unpleasant result at the end of construction work. Usually this happens from a lack of experience, as well as from ignorance of some of the features in the implementation of this work. We suggest that you familiarize yourself with our tips before starting your intended business.
When you apply bark beetle plaster on the walls, immediately plan to do this work with planes, but not with squares. That is why for a particular wall you need to choose enough time in order to complete it completely. If, nevertheless, circumstances do not allow you to finish the entire wall at once, get a dividing strip in advance and finish work at the junction with it.
At the beginning of the next working step, a dividing strip should be glued at the junction with the previously painted section of the wall. Thus, you will ensure that you will not notice the joints of your paint at different times.
If you work with the application of decorative plaster bark beetle in pairs, then your work will look better, of course, provided that both masters know what and how to do. Usually one master applies the finished plaster to the surface, and the second gives it the final look.
When working with this finishing material in the summer, it is necessary to apply in a cool time of the day. If you do otherwise, the bark beetle may crack or dry out too quickly - and you will not have time to bring it to its final appearance.
When purchasing material for the facade of a building, remember that the paint to complete the work on the facade must be made by the same manufacturer as the decorative plaster. However, it should not be applied immediately after the plaster is dry.
Such a surface must first be primed, and only then paint is applied, which will dry in a day, which will mean that the facade is ready for use.
1. Incorrectly prepared surface:
the wall on which the decorative plaster will be applied should be leveled as much as possible, and then a primer and putty should be applied to it.
2. The plastering process is not done according to the rules:
a) decorative plaster should be applied at a temperature balance of +5 C to +30 C degrees of heat - not higher or lower;
b) when working outside, the plaster should be applied in the absence of direct sunlight on the surface;
c) even application of plaster bark beetle to the surface is a guarantee of a neat and high-quality work performed, but if in some places the pattern is less noticeable than in others, then the plaster should be removed from that place and distributed in the place where it is too pronounced.
d) the places where the work ends, and then it will continue, you need to make uneven, or use a special tape - this way you will avoid a pronounced visibility of the joints.
3. Preparation of the solution is not according to the rules.
On the packaging when buying a ready-made solution, the rules for its preparation are indicated, which must be followed exactly. There are also ready-made solutions that are more convenient and help beginners avoid mistakes at this stage.
There are several original options for the plastering process that will give the facade of your house or interior design exclusivity. Among them there are methods such as:
- rain (the grouting process is carried out diagonally and can be supplemented with stencil drawings);
- cork (grout should be done in circular motions directed in one direction);
- carpet (grouting is done in the order of chess) and other methods.
VIDEO
Beautiful buildings, original facades, a variety of colors and relief structures - almost every city can surprise and delight with masterpieces of architectural fantasy.
Identical houses in the past, now every owner of a private house, summer house or mansion is trying to make his home beautiful, unique in its performance not only inside, but also outside.
Construction market provides ample opportunities and materials for construction and repair, and everyone can easily transform their home. A popular material that is used in most renovation and decoration works is decorative plaster.
A certain composition of the plaster, under the original name "Bark beetle", after drying gives a drawing in the form of grooves, resembling the surface of the bark of a tree, cut by bark beetles.
Irregularities on the walls give texture and the aesthetic appeal of the building façade.
Any brand of plaster contains fragments of marble ranging in size from 0.1 to 4 millimeters in diameter, determining the material consumption - more granularity, more costs.
Available in white, which allows you to create a unique image of the interior of any room or the exterior of a building, applying various dyes on a dried wall treated with plaster.
Plaster "Bark beetle" was originally used for exterior walls buildings. But the designers have successfully found its application in the interior.
Plasticity and obedience to the instrument craftsmen - distinctive features that allow you to apply plaster on a base of varying complexity and of any kind - concrete, cement, brick, wood, drywall, glass and many others.
Indoors the plaster "Bark beetle" is more often used in the interior of bathrooms and toilets, due to the ability to maintain structure for a long time and properties in a humid environment.
Choosing plaster it is desirable to take into account the dominant component in the composition. For example, a water-based, odorless material is suitable for living quarters.
Read also the article about decorative plaster rollers.
Textured plaster "Bark beetle" has many advantages before other finishing materials:
Maximum durability and environmental friendliness - consists of natural ingredients , does not emit harmful substances into the environment.
A light weight - does not create unnecessary stress on the building frame, thanks to the mineral filler.
It is used as a raw material - containing polymer and mineral additives, has good viscosity and high-quality adhesion to the working surface.
Resistant to all weather conditions - does not shrink, perfectly tolerates exposure to sunlight, changes in seasonal temperatures, is not afraid of rain and hail, retains its characteristics for 15-20 years.
Refractory properties plasters - preservation of the structure and brightness of the color palette for a long time, does not fade under the influence of solar radiation.
Simplicity and ease of use and care - washable with water and any detergent.
Resistance to any mechanical damage.
Wide range of colors. The initial color of the plaster is white - it can be painted in any color with any kind of paints.
Hides irregularities and minor wall defects.
Affordable material.
In case of serious mechanical damage, it is almost impossible to eliminate the accident without violating the original composition, it is advisable to entrust finishing work to professionals - the material is rather difficult to apply.
Different manufacturers offer different finishes. An acrylic or plaster base is used, with the addition of white cement and natural marble chips.
Acrylic plaster - completely ready-to-use material ... Gypsum-based composition is a dry mixture that requires preparation.
Mixes do not contain solvents and plasticizers , and the particles that make up the composition enhance the bonding effect. Each manufacturer has its own polymer filler, which determines the technique of applying plaster to the wall surface.
Differs:
by type - for building facades and interiors;
by properties - strength and resistance to various external influences;
by structural features - various variations of the pattern, composition.
astringent properties - a decisive moment in the classification of coatings, distinguish between mineral or cement-polymer and polymer.
Mineral or cement-polymer compositions are made based on various types of cement or gypsum - a traditional line-up with properties of lime-sand mixtures:
moisture resistance (rain, snow);
frost resistance (up to -50 C);
resistance to abrasion and mechanical damage;
affordable cost in comparison with acrylic mixtures;
preservation of quality characteristics for a long time (6-7 years);
difficulty in coloring - the cement absorbs the coloring pigment, coloring only with mineral paints is possible.
Polymer compositions are made based on acrylic components and have high plasticity. Characteristic features of such plaster:
durability - up to 15-20 years;
does not crack;
the ability to choose a color scheme by adding paint during the preparation of a solution or into an already prepared mixture;
good adhesion to the working surface, no preliminary preparation of the walls is required;
moisture resistance;
the cost is more expensive than mineral analogues, the consumption per square meter (1 m2) is higher.
Pay attention to characteristic features of different types plaster, for indoor work, polymer compounds are more suitable, and for building facades - cement-based materials.
Finishing with plaster "Bark beetle" of the facade of houses occurs in several stages:
Choosing the right tool.
Preparation of the work surface.
Primer.
Preparation of the solution.
Application and grouting.
Painting.
Perhaps you will find useful information on how to make a wet facade with your own hands? Read this article.
For plastering work, you will need the following tool:
plastering trowel - mix and grind the solution, apply and level;
spatulas of different sizes - for applying plaster;
cutting - a shovel, for small plastering works;
grater - for grinding plaster mortar;
scraper - removal of wallpaper, paint, whitewash residues from the work surface;
paint rollers - for priming;
pallets for paint and primer;
construction mixer or drill - for mixing the prepared solutions;
brushes - to moisten the surface before applying the solution.
Additionally you may need - steel brush, grinder, gear, hammer.
Plastering is desirable to carry out on a flat and smooth surface. To do this, you must perform the following actions: building facade clean old plaster , residues of other finishes and dirt.
In a damp room additionally saturate the surface with an antiseptic , cover large cracks and crevices with gypsum putty or cement mortar, if the wall has significant irregularities - level the surface with a layer of ordinary plaster.
The second mandatory stage of preparation is the priming of the walls. The type of surface determines the selection of the primer ... For a smooth base, an adhesive primer with good adhesion properties is suitable.
A porous surface is best first deep penetrate , and on top, apply an adhesive primer, for better adhesion of the plaster to the wall.
Priming layer dries for at least 30 minutes ... The color of the primer is matched to the color of the plaster as much as possible. This is done so that the translucent soil does not spoil the main idea and general appearance.
If the working base is a concrete or a wall covered with cement-sand plaster, then priming is not required. In this case, the wall moisten with plenty of water in advance , for a secure grip.
Priming process:
shake well the container with the primer;
for ease of application, pour the liquid into a special tray;
Dip a paint roller in the ground and squeeze it slightly;
treat the walls with soil, distribute the liquid in an even layer, without smudges;
after a while, after drying, repeat the procedure again.
back to content ↑
The plaster is sold ready-made, these are acrylic compounds, or in the form of a dry mix.
The first is used immediately, the second you need to prepare:
choose the required volume of a container, a construction mixer or a drill with a special attachment;
collect water in a container with a temperature of +15 to 20 C, at the rate of 1 liter per 5 kg of composition;
gradually pouring the dry mixture into water, mix with a mixer;
after mixing thoroughly, leave for 5-10 minutes to obtain a homogeneous consistency;
Stir again immediately before use.
The prepared mass can be tinted - add the required amount of coloring agent and mix thoroughly. Ready-made acrylic-based plasters paint well, other types of coatings are best painted after drying on the wall.
The process of applying decorative plaster "Bark beetle" is quite simple. In order for the facade cladding with a bark beetle to be correctly performed, you need to follow for an even distribution of the composition on the surface (see photo).
For work different size spatulas are used - large for spreading the mixture on the wall, smaller spatula for taking the composition from the tray and for removing excess material or smudges.
Layer thickness is maintained at 2-4 mm , which is commensurate with the size of the marble chips in the composition. Too thick a layer does not allow the appearance of texture and complicates the manifestation of the pattern, and through a thin layer of plaster the primer will be visible, violating the intended pattern, and the properties of the coating will be much worse.
Work can be performed at a temperature from -5 to +25 С degrees ... The coating dries up - 20-30 minutes, so the work must be done quickly.
As soon as the plaster dries, you can start grouting - an interesting and creative process on which the result depends. If the plastered surface does not shine and the plaster does not stick to your hands, then it's time to create a drawing.
Grouting is carried out with a plastic float. When driving, marble particles leave grooves on the wall and recesses, forming a characteristic pattern.
The foam is covered in the same way, if the insulation of the facade was originally planned.
Different rubbing techniques have different effects.
Ways of applying bark beetle:
"Rain" - movement of the float up and down, left and right, diagonally;
"Curls" - created by circular movements of the tool;
"Carpet" - alternation of movements up and down and left and right.
Below are video tutorials with an illustrative example of application plaster in various ways.
Method of applying "rain": video tutorial
VIDEO
Method of applying "carpet": video tutorial
VIDEO
Method of applying "curls": video tutorial
VIDEO
There is no need to prime the walls before painting, you need to work with paint on a dried layer of plaster.
Before you paint the plaster, you need to wait at least a day after applying the composition. Compared to the tinting of the mixture during the mixing process, the final painting has its advantages. For instance: it is more convenient to level the wall after the paint has dried, while the tinted composition is more difficult to influence and leaves visible traces of rubbing.
In addition, painting gives freedom of design ideas - as an option, you can paint in two colors. To do this, first, the wall is covered with one color, dries up, and is covered on top with another layer of paint, a light shade. Moreover, the second layer is made with a semi-squeezed roller so that the paint does not flow into the grooves.
To improve the quality properties, plaster is additionally treated with varnish ... A greater effect will be given by a varnish with glitter or with a glossy sheen, or just matte.
Decorative plaster "Bark beetle" - will decorate any building, and will allow you to enjoy a beautiful view for many years.
When it comes to plaster Bark beetle, it immediately seems to be something unimaginable, covered with numerous cracks. Indeed, this mixture got its name from its unusual pattern, which resembles the work of a wood bug, which leaves numerous passages in the wood. It can be used for outdoor and indoor use. Naturally, you need to know some rules that will help you get a truly individual texture, and not disappointment.
1 What is "Bark beetle"?
2 Advantages and disadvantages
3 Material selection
4 Working with the "Bark beetle"
4.1 Surface preparation
4.2 Preparation of the mixture
4.3 Application
4.4 Getting a pattern
5 Rules for tinting and staining
It should be understood that the appearance of the Bark beetle depends solely on its composition. The general part can be acrylic or gypsum, which makes this plaster similar to other types. But additives, in the form of fine mineral chips, marble - distinguish it from others. It is their application that is the key to obtaining an indescribable pattern. Of course, the application technique is also important. Thus, only a combination of all the necessary indicators gives the desired result.
Inexpressible drawing of plaster Bark beetle
Each manufacturer tries to make an individual composition. Therefore, it is necessary that the label has a name - textured plaster Bark beetle (the last word is the main one). There is also roller plaster, but it is slightly different in the resulting pattern. Although many do not really attach importance to this.
The drawing of roller plaster is very similar to the Bark beetle
On a note! It is better to shop at specialized hardware stores. Now there are many fakes that may be unsafe to health.
Giving preference to such a composition, first of all, they take into account its advantages:
Due to the fact that mineral chips act as a filler, the resulting layer is noticeably lightened. That is, the impact on the surface will be much less. The structure will not experience unnecessary deformation load.
The mixture is completely safe, it does not emit substances harmful to human health.
Decorating the facades of houses with the Bark beetle is an excellent solution. It is able to withstand a wide range of temperatures. Feels good under the influence of ultraviolet radiation, resistant to fire. With strong heating, it does not contribute to the formation of toxic substances.
Differs in increased durability. Not exposed to fungi and mold. Not afraid of heavy precipitation.
Withstands mechanical stress. Even light blows do not harm the plaster.
Due to the fact that the main color is white, it is possible to obtain a wide range of shades. The effect is achieved by adding color or coloring.
Facade decoration with Bark beetle is much cheaper than roller plaster.
The facade of houses finished with Bark beetle looks very impressive
It is quite difficult to work with this material. To get the desired surface, you will have to try and make a lot of effort.
Damaged areas are difficult to restore.
Bark beetle application manipulations have seasonal restrictions.
It is not surprising that the work requires a certain skill. Indeed, in order to understand how to correctly apply this or that composition, you need to have experience.
Facade plaster bark beetle - has a large selection. Even the same manufacturer may have different options. The differences lie in the physical form of the mixture and the graininess. These differences affect the resulting surface, the texture of the picture. Therefore, you should purchase the right amount of material at once. Even different batches of the same supplier may have some differences.
Plaster Bark beetle has a different grain size
It is very important to consider the grain size of the plaster. It affects not only the decorative qualities, because it is due to the pebbles that grooves appear, but also the total consumption of the solution. The more granules there are, the more bark beetle will be required on the facade or walls.
With a physical appearance, everything is much simpler. We are talking about the state in which the mixture is: ready-made or dry. Of course, it is quite profitable to purchase a ready-made solution. But its price can be very high.
On a note! Ready-made roller plaster repeating the effect of the bark beetle costs an order of magnitude more expensive. But there are hardware stores where you can order the production of a mixture to order. That is, to choose the components, to determine the size of the fractions.
Do-it-yourself decorative plaster Bark beetle is obtained only from dry ingredients. The manufacturing process is pretty straightforward. The difficulty lies in observing the necessary proportions, which is not always possible to do at home. Therefore, it is better to give preference to dry mixes that were manufactured in factories.
VIDEO
It's worth making a reservation right away that you don't need complex tools and devices to work. The set is pretty simple:
Capacity. Special construction buckets are great.
Spatulas - different types. It is best to have a kit on hand that consists of three different sized tools.
Drill. It is necessary to purchase a mixer attachment for it.
Grater.
The application of plaster Bark beetle - depends precisely on the ability to own these devices.
It is assumed that Bark beetle plaster will be the final stage of surface finishing. Therefore, attention should be paid to the preparation process. After all, creating a beautiful top layer is easy, but a lot depends on the base.
Wall decoration with plaster Bark beetle requires a well-prepared base
Decorating the house with the Bark beetle begins with the following, regardless of the type of work:
The surface is completely cleaned of all excess. Remove any dirt. If there are areas affected by fungus or mold, then they are removed and etched with an antiseptic.
Any cracks and chips are sewn up and filled with mortar.
A starting lineup (purchased or made independently) is applied to the wall. You should get a flat surface.
On a note! It is believed that the application of decorative plaster Bark beetle can hide some flaws. Indeed, small differences will not be visible. But fixing the curvature of the walls, if this is not a design idea, will not work.
If the manufacturer has not stated otherwise, then a primer is applied. Sometimes it is tinted for greater effect.
VIDEO
To understand how to make the Bark beetle plaster the most malleable in work, you should be guided by the rules for diluting the dry mixture. Of course, every self-respecting manufacturer duplicates them on the packaging. So:
Pour water into a container and start pouring the mixture.
Pay attention to the temperature of the liquid, it should be within 20 ° C.
The solution is gradually mixed. It has to be done well. It happens that some fragments remain dry on the bottom.
The composition is left for some time, after which the procedure is repeated.
Preparation of the solution
It is necessary to dilute as much solution as necessary for work. You cannot cook it for the future. If it dries up, then it will not be possible to return its properties.
Before starting a conversation about how to apply the bark beetle, you should make a small remark.The fact is that there is a roller plaster on the market, it has a similar pattern, but slightly different in application. Therefore, you should carefully consider the choice of composition.
The process of transferring the mixture to the surface itself does not differ from other types of decorative solutions:
Video (click to play).
With a spatula, take the required amount of material and put it on a grater (trowel).
The tool is placed at an angle of sixty degrees to the surface. And moving from bottom to top - they apply the bark beetle to the facade (or other area). You should get an even distribution.
It is taken into account that the thickness of the layer directly depends on the diameter of the largest fraction.
The excess is removed. This is done immediately, and not during the formation of the picture. Plastering with a trowel
On a note! Wall decoration can also be done with a special device that will automatically apply the solution. But how to apply the mixture - everyone decides for himself, based on the amount of work.
This is the first stage, the effect that should be obtained is not yet visible.
The technology for applying plaster Bark beetle is generally clear, but the further process will determine the factor. Manipulations are carried out with a plastic or wooden spatula. The main thing is that work should begin immediately after applying the composition. How to do:
The tool is slightly moistened so that nothing sticks.
He is pushed against the wall.
They make translational movements. Pebbles begin to move, grooves appear.
Getting a drawing depends on translational movements
Some ways to get different drawings:
If you make movements along a small radius, then you get short curls.
When the trajectory is executed in the form of parallel lines, the finish of the Bark beetle will resemble dashes. They can be made in different lengths.
Making movements perpendicular to each other - you get a mesh. The lines are made in different lengths.
One of the ways to apply plaster Bark beetle
A few secrets on how to apply Bark beetle plaster:
When choosing an acrylic-based mixture, you need to remember that it cannot be applied at high temperatures - it begins to crack.
In winter (outdoors) work must not be carried out, even if the manufacturer indicates otherwise on the label.
Indeed, the Bark beetle for facades is not very afraid of heavy precipitation, but does not perceive the constant impact of dew poorly. Tinting and staining rules
Of course, how to plaster with a Bark beetle is not an easy question. In order not to spoil the surface and not to redo everything again, it is better to practice a little. You need to understand how to distribute the layer and how to form the desired pattern. Although the decorative appearance will also depend on the staining.
Painting the plaster Bark beetle can be done with a roller
It is difficult to add pigments to dry solutions. Therefore, it is better to buy ready-made formulations in which the manufacturer himself has calculated the necessary proportions. To make the Bark beetle the right shade - the subsequent staining will also help.
When you buy a ready-made solution, everything can be easier. Often stores offer, for a small fee, adding color and mixing - using an automatic machine.
But a really decorative surface can only be obtained in one way - double staining. This technology looks like this:
Do-it-yourself bark beetle plaster is painted with a brush in the first layer. You need to do so that the paint penetrates into all the recesses. It is important to remember that the shade is selected such that it will look favorably shaded.
Until the paint has dried, they pass over the surface with a sponge. It is necessary to remove residues that could completely fill the grooves. And also erase the composition from the bulges.
Now the second layer is applied - with a roller. This must be done quickly so that the paint does not clog the recesses. Contrast coloring of plaster Bark beetle
Modern possibilities provide a wide selection of materials, especially for painting walls. Therefore, fantasy depends only on taste.