Do-it-yourself Philips food processor repair

Kenwood (Ghanima) Elena, Good afternoon! From the Chef series, we can recommend you the Kenwood KM 336 Chef Classic model here in the complete set only a blender and you can buy many other attachments.

From the Major series, we can also recommend the Kenwood KMM 020 Major model

Valery (Shawnna) Hello! In use there is a food processor KENWOOD FP 690, which includes a glass bowl for the mill in the form of a glass. This bowl was damaged during use and was not suitable for further use. Now we don't know where to get it. The services indicated on your site are refused. Help, please, tell me where to buy. Thank you

Kenwood (Ghanima) Valery, Good afternoon! The site that you indicated is not ours. Our site - Phone and address of the service center in your city, you can find out here -

Valery (Shawnna) thanks a lot. figured it out, got through)))) I will order

Kenwood (Ghanima) Valeriy, Please, we were glad to help you.

Dexster (Raviya) KENWOOD FP 270 the citrus press has broken, where can I buy / replace it? Are the components sold?

Kenwood (Ghanima) Dexster, Good afternoon!
We advise you to contact the manufacturer's service center.
Find the service center nearest to you on the page or call the Hotline 8 800 200 52 62 (call within Russia is free).

Svetlana (Kevalini) Hello, is it possible to order accessories for the Major Premier kitchen machine, which are not in stock, under the order? How long is the delivery time, if that. Thank you.

Kenwood (Ghanima) Svetlana, Good afternoon! In the near future, the warehouse is expected to be replenished, including the nozzles. The positions you are interested in may appear.

Stas (Elko) What attachment would you recommend for chopping vegetables and fruits: AT340 or AT647?

Kenwood (Ghanima) Stas, Good afternoon! For chopping fruits and vegetables, the KENWOOD AT 647 food processor attachment is suitable for you, since the AT340 is used only for slicing. Thank you for contacting us.

Stas (Elko) Kenwood (), thanks!
What is the difference between the KAH 647 PL and the AT 647?

Kenwood (Ghanima) Stas, The KENWOOD KAH 647 PL food processor attachment is used in a high-speed drive (where the blender is). This attachment is compatible with all kitchen machines except the kMix series. And the KENWOOD AT 647 nozzle is used in a medium-speed drive, because of this it is not suitable for all models (not compatible with models: KM331 Chef, KMC570 Chef KMP771 Pro Machine).

Stas (Elko) Kenwood (), thanks for the info!

Stas (Elko) I ordered a nozzle KENWOOD KAH 647 PL, order number 379. They called a few days later and said that I could pick it up from the office of a logistics company. I come and see that they brought something not at all what I ordered, but some kind of ice cream maker. Moreover, the box was in such a form that if they brought the correct position, I'm not sure what I would take.
I could not get through to you, and no one called back from you.

Kenwood (Ghanima) Stas, Good afternoon! A manager will contact you within an hour on this matter.

Stas (Elko) Just called back, apologized for the mistake in the order and promised to make free delivery to the apartment as an apology.
We quickly resolved the issue!
Kenwood Russia, thank you!

Katerina () Hello! We bought a kenwood mg354 meat grinder, rolled the meat, then the tomatoes. Spare parts were washed. A few days later the smell was such as if a corpse was lying inside her. Disassembled, and there are leaked juice residues inside the body and on the motor. There is a felt ring, there is a drain, but it still leaks. How to be? Is it the ring or the gear (it seems to be intact)? Should I change the ring to a silicone one? Thank you

Tags: How to disassemble Philips food processor hr7745 video

Food processor PHILIPS HR 7735-how to disassemble it, unscrew all fastening screws, how to remove the cover to replace the gear,. Disassemble Philips Food Processor HR7745.

MOST USEFUL BEST VIDEO LESSONS. JUICY REPORT KITCHEN COMBI PHILIPS HR 7766 - Duration: 10:01.

Features of self-disassembly of a food processor of different brands - how to disassemble a Mriya, Bosch, Moulinex, Philips, Tefal,.

Can't remove the last 2 screws in my Philips hr7745 food processor. The 2nd large bowl stopped working. I guess that.

I accept it with pleasure. In my opinion, this is an interesting question, I will take part in the discussion.

Nowadays, no housewife can do without such a necessary device as a food processor in her kitchen. A variety of modifications allows you to perform any kitchen work without unnecessary expenditure of time and effort. For example, a food processor with a meat grinder will allow you to cook delicious minced meat in just a few seconds, and a food processor with a dicing function will instantly cut food for your favorite salad. Therefore, every problem becomes a problem that requires an immediate solution.

Combines come in three different types: mini, compact, and multifunctional. The latter type, for example, is a food processor with a meat grinder and a juicer at the same time. But, despite their differences, the principle of operation of the food processor is almost the same for all modifications.

Once in the processing bowl, the food is brought to the required state in accordance with the set program, as does the kenwood major classic km636 food processor. The process takes place with the help of a variety of attachments from whisks and discs to knives, which are installed on the bottom of the container or fixed on the lid. The attachments are driven by a collector motor, whose power can vary from 300 W for mini-combines to 700 W, which a combine with a meat grinder has in its arsenal.

How do you know that repairing your food processor is an absolute must? Urgent action is required in several cases:

• if the device begins to emit sounds that were previously unusual for it, such as squeaking, knocking or grinding;
• if there is an unpleasant smell of burning wiring;
• if chips or cracks appear on the nozzles;
• if the device works unevenly or in a mode that does not correspond to a given program;
• if the combine smokes or sparks during operation;
• if the body of the device heats up during operation;
• if the mechanism does not turn on at all.

Despite the variety of functions, any appliance, such as a kenwood food processor, has five main parts:

• engine;
• receiver for products;
• container for processing products;
• a set of knives and other attachments;
• control Panel.

Failure of any of them entails the main causes of the malfunction. They are both mechanical and electrical in nature.

The first variant of malfunctions is manifested in the fact that the rotational movement is not transmitted to the working body. This happens for one of the reasons.

1. If a food preparation assistant, such as a Mulinex food processor, has a belt drive, the belt is broken.
2. When household appliances, such as a Philips food processor, have a direct drive, the lack of rotational motion indicates that the key on the rotor shaft has worn out.

Important! If the device does not run smoothly, then the drive belt is loose and needs to be tightened. If this is no longer possible, a part replacement will be required.

Electrical malfunctions can be as minor, such as blown fuse, switch or power cord, engine brush wear, and more serious when the motor fails and an armature rewinding is required, a collector or control board replaced.

Owners of household appliances sooner or later face such a situation when, after turning on, the unit either does not work at all, or does not work properly, emitting various uncharacteristic noises and sometimes even sparkling.This also applies to food processors.

In this case, the owner of the unit must remember whether the factory warranty is still valid for the device. If the warranty period has not passed, then you must immediately contact the service center for the repair of your equipment.

If the kitchen assistant's warranty no longer covers, then first try to understand the causes of the breakdown yourself. To do this, you will need to disassemble the unit.

Important! Remember to reassemble the food processor while doing this.

Here are the main steps for dismantling:

1. disconnect the device from the mains and disconnect the removable elements;
2. remove the combine from the base and turn it over to inspect the drive belt and gear;
3. removing the belt and gear, disconnect the engine, open it and inspect;
4. remove the protective cover of the gearbox and inspect the drive shaft.

If necessary, more detailed advice for each specific model can be easily found on the Internet.

Having found out this aspect of the problem, and having identified the malfunction, make a decision to carry out the repair on your own or with the assistance of a professional.

If you are familiar with electrical engineering and feel capable of doing DIY repairs, then here are some tips for that case.

• If the transfer belt breaks or becomes loose, it must be replaced by purchasing a food processor belt from a service center.
• If the key is out of order, then more effort will be required: disassemble the combine by removing the motor; carefully dismantle the part; purchase a new key from the service center and install it in place.
• It will take you 5-10 minutes to replace a blown fuse. Because of such a small amount, it is not worth wasting time on a trip to the service.
• The connecting cord is also easy to replace on your own, since the missing components can be purchased at every electric store.
• If there are problems with the gear, then first you need to properly clean it and carefully examine it. A small percentage of wear is compensated by the lubricant, in more difficult cases, replacement will be required.
• When the brush is worn out, it is enough to replace the part with a new one.

Important! When purchasing spare parts, purchase only parts from the same manufacturer. Installing cheap parts will result in permanent damage to the combine.

The elimination of more serious breakdowns such as a burned out motor, failure of a shaft or bearings should be entrusted to a specialist., if only because you do not have the necessary devices and tools at home.

Important! The technique lives for a long time without problems and breakdowns only with those owners who properly take care of its condition.

Here are some tips to help extend the life of your food processor:

• Do not process too coarsely chopped, hard or frozen meat, vegetables or fruits.
• If you notice any unusual noise or odor, turn off the equipment immediately to prevent serious damage.
• After use, be sure to thoroughly rinse the parts with warm water and dry thoroughly.
• Never use detachable elements and attachments that are chipped or cracked.
• After the expiration of the warranty period, annually revise the internal parts and mechanisms, carrying out partial disassembly and inspection of the unit. It is better to change worn-out parts in advance.

Now you know how to repair food processors.

Message Broudy "14 Dec 2009 18:31

It is necessary to fix the rotor, holding it from below, where the belt is, with your hand (preferably with a thick glove or through a rag). Or by sticking a suitable pin in a special hole marked on the body with a white arrow.
And twist the upper part clockwise, because there is a left-hand thread.

But it looks like my problem is not at all with these fallen off varistors.
They say they do not affect engine performance.
It looks like the problem is with the control board.

Message Samrem »14 Dec 2009 19:35

Message george_of_314 13 Feb 2011 14:52

Message ELEremont »13 Feb 2011 17:21

Message george_of_314 13 Feb 2011 18:36

Message george_of_314 13 Feb 2011 19:16

Message tol_13 »13 Feb 2011 20:56

Good afternoon george_of_314

I was very surprised to find your post - just yesterday I had exactly the same story with this same (HR 7768) combine.
True, I got into it for another reason - the locks stopped working when the nozzles were rearranged.
The blocking seems to have been restored (the spring fell from the lower micrik), but after the assembly, the same trouble happened as you did.
I disassembled it again and found a gap in the printed conductor (apparently tore it, see, disassembled the code - also everything by poking everywhere.
Soldered, turned on disassembled - everything works!
Collected - the green light on "Stop" lights up for 5 seconds and then goes out - and silence.
It's too late today, tomorrow I will dig further.
The engine data is also of interest, 5 wires go from it to the board with microswitches - can someone tell you the commutation circuit in the engine, in order to collect the engine control manually (if the control board is really bent).

I would be grateful for any information on HR7768

Message george_of_314 »13 Feb 2011 22:12

Message tol_13 13 Feb 2011 23:19

Message george_of_314 14 Feb 2011 00:21

goricwhich cover can you not remove? Lay out the drawings, you can't explain it on your fingers.

p.s. TV sets are over, what kind of harvesters did you take?

TVs have not ended, but the problem remains

Sorry not the back, but the bottom

goric, so what's the problem? Can't you remove the bottom cover? Look for screws that are not unscrewed ..

P / S / Televisions are easier to understand than combines, and you probably thought that household appliances are the stupidest (they say, what's there to repair, turn the nuts and that's it).

In this case, to completely disassemble the device, you need to unscrew the auger holder (Fig. 1), if it doesn’t unscrew - it’s soured, then you do a sequence of movements.
1 remove the plastic bar for mikriki (Figure 2)
2 Fix the pipe onto which the auger holder is screwed with a screwdriver or any other suitable object.
3 try not to do the irreparable (fig 4)

A food processor is an excellent home appliance that makes it easier to work in the kitchen and helps you quickly cook tasty and interesting dishes. However, like all equipment, the combine may fail or start to work intermittently. If you take it to a service center, they will take a lot of money for repairs. But even in this situation there is a way out. You can fix the unit yourself. Let's talk about how to repair and disassemble a food processor with your own hands: the main stages.

We disassemble the food processor

In order to inspect the device, the Mulinex food processor is disassembled in the video below, everything is described in detail how to do this. If the harvester stops working, it is necessary to inspect and carry out all the electrical circuit and parts that are responsible for the power supply of the unit. For this, a Philips, Bosch, Siemens, Moulinex or Mriya food processor is disassembled.

Dismantling the Philips 7766 food processor is carried out as follows:

1. First, the rod holder with a solid screw surface is unscrewed;
2. The plastic strip is removed at the bottom;
3. The tube with the rod holder is fixed;
4. A screwdriver is taken, inserted into the opening under the shaft at an acute angle and screwed on from itself until it blocks the rotating rod. Thus, the tip can be easily unscrewed;
5. Next, all the bolts are unscrewed and the cover is removed;
6. The switch handle and buttons are latched so they can be removed easily.

After all these manipulations, do-it-yourself disassembly is completed and you can start repairing the unit.

If the rheostat breaks down, then the speeds will start to work incorrectly and not at full strength. If the belt shaft does not turn, then this may be the reason that the belt is slipping or the clutch is damaged.

Next, let's talk about how the Bosch food processor is disassembled:

• The first thing to do is to disconnect the device from the network;
• If there is an instruction, we do everything according to it and check all the details with it;
• First, the drive shaft, gearbox and electric drive are disassembled and checked;
• After that, they go to the juicer, mixer disc and attachments;
• If everything is in order here, it is worth disassembling the gears, switches and brushes.

Combines are based on speed regulation. If the asynchronous motor is inverter controlled, then the repair and disassembly of the Siemens mk 52800 food processor, as well as Moulinex and Mriya, will be connected exclusively with the collectors. However, such motors can also be powered by microcircuits.

Food processors have the same structure and controls. Therefore, do not be afraid to repair them yourself. The main thing is to learn how to properly disassemble your kitchen unit and learn how to check the operation and serviceability of all circuits and components. Having spent your time and energy on this, you can learn how to independently repair equipment and save a lot of money on this.

Today, the food processor from Bosch and many other manufacturers has become almost indispensable devices in the kitchen. There are various modifications of these units that allow you to perform various tasks, and you will not make any special efforts. For some housewives, they have become very important, and any breakdown in the system becomes a serious problem. In this article, we will tell you about the device and how to repair food processors with your own hands.

The device consists of separate elements of the mechanism, the most basic elements are as follows:

• Electrical engine;
• receiver of processing products;
• camera for processing ingredients;
• sets of nozzles and knives;
• the main control panel of the harvester;
• electrical wiring connecting the main elements.

The body material for combines is usually made of plastic. However, all other parts, such as attachments, knives and other elements are made of stainless steel, as it is durable, and it is on the inner parts of the device that the greatest stress is placed.

Combines are divided into several types:

The last type of combines are those in which, for example, there is a combination of a meat grinder and a juicer. However, despite their different functional features, they all have the same operating principle.

After loading the products into the working chamber of the combine, they are brought to the desired state according to the given program. Processes can be changed by replacing nozzles with them and giving the device the necessary commands. The attachments are driven by an electric motor. It's easy enough to understand that your food processor needs urgent attention:

• new sound effects that the device has not previously produced, for example - squeaks, knocks, rattles and others like them;
• you feel that an unpleasant smell of burning wiring comes from the car;
• cracks and chips have formed on the nozzles;
• the unit starts to work at an uneven pace, or it works in the wrong mode according to a given program;
• the device does not want to activate and start working.

As for the torque transmission part, in some combines, a belt transmission is used to transmit torque to the main working bodies. When the device starts to perform poorly, it is possible that it is time to replace the worn out belt. There is also a keyed transmission of twisting forces, in this case the key may wear out, which will also lead to the inoperability of the combine.

There are many options for malfunctions of combines, perhaps some of its internal elements may fail, in case of failure of one part, the whole mechanism may break. Also, not rivers are cases when problems arise in the wiring of the unit itself, when a short circuit occurs.

Sooner or later, any owners will have to do it on their own repair your food processor. Before disassembling the food processor, make sure it is still under warranty after purchase. If there is one, then it is best to take the unit to a service center so that they provide the necessary service and return the combine to its working capacity.

But as happens in most cases, breakdowns occur after the end of the warranty period, here it is already worth trying to disassemble and make food processor repair Bosch, before you go and take it in for repair, where you will be charged a lot of money for repairs.

First of all, we disassemble the food processor, but remember well what was removed and unscrewed from where, since you will have to assemble the unit back. All actions boil down to the following:

• turn off the device from the mains and dismantle all removable parts;
• remove the combine itself and make sure the integrity of the belt and drive gears;
• remove the above items, and take out the engine. Inspect it for integrity and performance;
• Remove the protective cover from the gearbox and check the drive shaft for signs of defects.

In case you have a different model, you can easily find videos and detailed instructions on the Internet.

When you are going to buy a replacement for some part, be sure to take the original ones, since third-parties simply will not be able to calmly fit into the groove. You can purchase such items in special service centers, or order them via the Internet.

1. It is best to process finely chopped foods, and avoid frozen vegetables, meats, and other items. It is also not recommended to crush solid ingredients;
2. As soon as you feel an unpleasant smell coming from the combine, immediately turn it off in order to avoid a short circuit and prevent a breakdown;
3. After you have finished the work, it is necessary to thoroughly rinse those elements of the combine that took part in the processing of products. Dry all parts thoroughly before reuse;
4. In no case use attachments that have defects, this can harm the harvester itself;
5. After the warranty period has expired, it is best to regularly (at least once or twice a year) carry out preventive maintenance on the combine. Disassemble it and lubricate the necessary components of the mechanism, as well as replace the worn-out parts of the device in advance, if they are found during disassembly, in order to avoid malfunctions in the future.

We have told you the main ways to make repair of food processors, and how best to avoid unpleasant situations with a breakdown of this device. In case of difficulties, it is recommended to contact the craftsmen who will find the malfunction and make high-quality and correct repairs.