Do-it-yourself TV repair evgo

In detail: do-it-yourself TV repair from a real master for the site my.housecope.com.

Evgo ET-2975 chassis M13 / Evgo ET-2575, ET-2580

Clones: Avest 64ТЦ-02C (except for power supply unit), 72ТЦ-02 / Grundig 85ST-5244, ST72-5244, ST72-6955 / Polar 63CTV3050, 63CTV3052, 63CTV3055, 70CTV3050, 70CTV3052 (except for power supply unit) / Sansui SV-2916I, SV-2918 / Saturn ST-2139A, ST-2539A, ST-2939A, ST29NF1 / Shivaki STV2573, STV2999 / Sitronics SB-2508 / TCL 2927, AT-2990, EC-2518, EC-3418 / Tedelex EC2975 / Telefunken TK2529T

Main - 40-2916MT-MA c / 40-2916MT-MA.i
Micom - TMP87PS38N (sticker: M13BV1) / TCL-A18V01-TO 87CP38N-4GD1
Memory - 24C08 6
SMPS - STR-F6656, SE140
TR Chopper - BCK-150-F / BCK-4901
SAW - K3351K
Secam - datasheet on TA1275AZ
Video - datasheet on TB1240AN
Vertical - datasheet on TA8427K
Sound - datasheet on TDA2616
Stereo - TA1216AN
Tuner - 3139 147 16541M # UV1355 / S L B2 / TM9801A-VS
Tube - A68ESF004X111KK / 73SX733Y22-DC01
FBT - BSC29-0165
HOT - datasheet for 2SD2553 / 2SD1556
RGB Amp - 2SC4544
Remote controller: –
IC remote - datasheet for 9028A-023
Other ICs - HCF4052BE

Without video and audio equipment, few people can imagine a full-fledged home, and it is precisely because of regular and intensive use that this type of equipment is most often subject to breakdowns. Repair of TVs can be done at home, if you call a master, or do all the work yourself.

Before starting repair work, you should determine what exactly broke in the TV. In any case, this will greatly facilitate both the independent repair process and the clarification of the essence of the problem to the TV technician.

Photo - Samsung design

The main types of faults:

The device does not turn on. In both CRT models and more modern LCD TVs, a malfunction occurs due to a blown fuse. But in different devices, it can be represented by different details. At the same time, the problem may be a burnt out diode bridge; Photo - kinescope
The potential of imported and domestic projection TVs is very often lost. A posistor is responsible for this function;
Breakdown of plasma monitors. These include color changes, swings, interference, or dark (light) streaks on color TVs during broadcast;
However, sometimes problems with turning on or operating certain functions are due to a faulty power cord or outlet.

Video (click to play).

Of all these troubles, the most difficult to fix is screen breakage. For example, if light reflections appear on the monitor after a shock or water ingress on the matrix, then it is better to immediately take the device to a service center, where it can be repaired under warranty.

Photos - details

But most of the repair work can be done easily with your own hands. Let's consider in order how to carry out urgent repair of home LCD and LED TVs Thomson (Thomson), Sharp (Sharp), Samsung, Panasonic (Panasonic) and other models:

The difference between the above types of TVs lies in the different backlighting, but in principle, their operating schemes are very similar. In LSD TVs, the monitor is illuminated by fluorescent lamps, and in LED - by LEDs. Therefore, if the monitor does not turn on, you immediately need to check whether the backlight is receiving power;
Regardless of the brand, the back panel is removed. It is screwed to the base with screws. After that, you need to remove the network power wires from the matrix (first unplug the device from the outlet); Photo - rear panel
To check their performance, you need to connect the most ordinary lamp to the contacts. Most often used at 100 watts;
It should be noted that modern Toshiba (Toshiba), Sony (Sony), Philips (Philips) can connect several backlight sources to the circuit, so you will need to check each one separately; Photo - matrix
For testing, the matrix is removed, a lamp is connected to the contacts and the power wire is connected to the network. If it is working properly, then the lamp will light up. If not, then you will need to replace the cable or repair individual threads.

In addition, a certain area of the backlight may burn out.

In different models of television equipment, the lamp is replaced in different ways. For example, for many Daewoo, Akai and Hitachi TVs, to dismantle a burned-out lamp, you will need to remove the matrix from the panel and reinstall the element on it.At the same time, for some Rolsen and Funai, it will be possible to change a burning light bulb or diode without dismantling it. Depending on the design, you will need to bend (unsolder) the contacts, remove the gasket and carefully remove the burnt element from the case. In its place, a completely similar lamp is installed, both in terms of parameters and dimensions.

Photo - LCD monitor device

Many Chinese models of television equipment - CTV, VAO, BBK, during disassembly you can see light stripes on the matrix. They indicate a breakdown of this particular element. Due to some external factors, the part stopped working and oxidized. In this case, you need to select an element that is identical in terms of performance and install it in the place of the faulty one.

Unlike old stationary CRT or portable models, plasma and ED versions are very rarely repairable if the screen breaks. This is a very time-consuming process, so not even all professional workshops undertake such work. In most cases, if the monitor is cracked, it will be cheaper and easier to buy a new TV set than to repair the old one.

Video: PHILIPS TV repair

Despite the total use of plasma, many owners still have more outdated CRT TVs (for example, Vityaz, Elt, Rubin, Horizon, JVC). Step-by-step instructions on how to carry out repair work on electron beam models:

Tips on how to check the TV posistor may be different, but any professional telemaster will recommend that you measure the resistance between its contacts. The part has four of them, that is, two pairs. For one honey, the resistance can be up to 600 ohms, while the other's resistance is in the range of 1-5 ohms. But this is only a theoretical check; for a more accurate diagnosis, you will have to solder the posistor.

In addition, capacitors and transistors often burn out in CRT TVs. They can even be diagnosed visually. They swell or change color on the board. If you see that the capacitor is blackened or cracked, then it must be replaced with a working analogue.

It is impossible to imagine a modern apartment or house without video and audio equipment. This equipment is used every day and therefore breaks down more often than others. There are several ways to repair TVs: send the technician to a service center, call a qualified technician at home, or make repairs with your own hands.

Before you start repairing a TV, you first need to make sure what the problem is. This will also help if you do the repair yourself, and then when the master comes, you will be able to explain the situation to him.

There are several types of malfunctions that can most often be found when a TV breaks down.

The technique does not turn off. In independence, a CRT TV or a modern LCD model has broken down, this malfunction is associated with a blown fuse. Only different models have distinctive details from each other. You should also pay attention to the diode bridge - perhaps it was he who burned out.
In both domestic and imported models, the potential can often go astray, for the function of which the posistor is responsible.
If the plasma TV monitor is broken, then the problem, most often, is interference or drops, light or dark stripes may appear, color changes while watching a program or movie.
The problem may be a broken cord or a faulty outlet.

If we take into account all the troubles listed above, it is worth saying that the most difficult breakdown is considered to be a screen malfunction. For example, light reflections appear on your monitor after the liquid hits the matrix or the TV is hit, then it is better to carry it to the teleservice.Here it will certainly be repaired, and if the warranty period has not expired, then it will be free of charge or at a reduced price.

See also - How to choose a TV for your home in 2018?

You can try to fix some malfunctions of TVs yourself. And it doesn't matter here - these are LCD models, LCD or LED, it is not necessary to call the wizard if you are confident in your abilities. But caution never hurts, because such TV models are not cheap, and without having any repair experience or knowledge in this area, you can only harm and aggravate the breakdown.

Before you start repairing LED or LCD TVs, you must carefully read the instructions, and also study the principle of operation of your model. Anyone, even one far from this field, will understand that the repair of TVs such as LCD or LED will differ from CRT models. In the latter case, you are guaranteed not to run into a faulty PTC thermistor. The main thing here is to determine the problem, why does the backlight not work?

If you are repairing LCD, LED models, then the only difference here will be what kind of backlight is used. If it is an LCD TV, then the backlighting is produced using fluorescent or fluorescent lamps. For TVs, LED backlighting is produced using LEDs. At this point, the differences between LCD models usually end.

The breakdown can only consist in the fact that there is no power, in order to check this on an LCD TV, you can do the following with your own hands:

open the back cover of the model;

remove the wires connected to the matrix;

connect the working lamp to the contacts;

there are also LCD models in which more than one light source is provided. In this case, all sources must be tested. Just dismantle the matrix and plug your TV into the network - you can see which LED is the problem.

When a broken lamp in an LED or LCD TV is identified, it must be replaced. This stage requires maximum care from the master, as well as the manifestation of special attention. In some cases, the lamp is removed without removing the matrix, you just need to move the protective elements with a rubber gasket and pull out the lamp with a soldering iron. Similarly, it is necessary to mount a working light bulb. Now we can congratulate you - you did the repair of the LCD TV with your own hands! Just pay attention to one important nuance - the new light bulb must fully meet the parameters and dimensions of the broken one!To repair TVs yourself, look carefully at the matrix! If there are "unhealthy" streaks here, then the breakage is in the matrix. Have a new part? Then everything is simple! You change it and turn on the TV, if it works, then you have accurately identified the breakdown.If the reason for the breakdown of LCD TVs is the screen, then it is best to purchase new models of LCD or LED equipment. It is not recommended to change the screen of LCD and LED models, as it is impractical! This also applies to the LCD matrix.What could be the problem with a malfunctioning plasma TV? If it is necessary to repair plasma TVs, then proceed in the same way as described above. Just adapt it to your specific case. This description can be applied to any model of plasma TV, just stock up on the necessary tools in advance.Although today most users prefer to use plasma, many still watch programs on more outdated CRT models. Let's find out how to repair a breakdown in such TVs. Below is a step-by-step instruction that will help you repair your electron beam product with your own hands.

If you do not turn on such a device, check first of all the fuses. In these TVs, the back is made up of panels. Therefore, it is necessary to unscrew that part of the panels.Under such panels you will find a board and the power terminals must be connected to the fuse. They are connected to a conventional incandescent lamp, or rather to its base, after which the TV must be connected to the network. In the event that your equipment is in good working order, the lamp will go out after switching on, otherwise, when the fuse has blown, it will either not work at all, or it will constantly burn.

The diode bridge may also break. It should only be borne in mind that it is necessary to regulate and repair it only after making a dial. In this case, not only a multimeter is used, but also a product passport, which indicates the main parameters of this model.

The most difficult breakdown in a TV with a kinescope is a posistor. To check with your own hands, you must first turn off the power circuit, and then turn it on. In this case, the lamp must be monitored. If the work lamp goes out, then it can be said that the posistor is faulty. To make repairs, it is necessary to adjust the resistance of the network and only ventures to change this part.

Read also: Chainsaw DIY tire repair

But not only the matter may be in the posistor, transistors and capacitors burn out in CRT models. The diagnosis of this breakdown can also be made visually. If the condensate is blackened or cracked, then we replace it with a serviceable analogue. Now you know why the TV does not work and how to fix it yourself.Do-it-yourself TV repair is a responsible business, since today a large number of different models (LCD, LSD, CRT) are presented on the market, each of which has its own technological features. Therefore, the approach to each type of TV is individual; in some cases, special skills will be required (knowledge of electronics, experience with a soldering station).Before proceeding with the repair of television equipment, it is necessary to find out the cause of the problem.The most common problems are:

TV screen does not turn on - this can happen with an old picture tube screen and with the most modern television panel. Basically, this symptom is characteristic of a blown fuse. When repairing, it should be borne in mind that the appropriate fuse must be selected for each model. And also experts recommend paying attention to the diode bridge, power supply, wire, perhaps the cause of the malfunction lies in these elements. Read also what to do if Samsung TV does not turn on.

Faint, barely noticeable picture - such a breakdown happens with LCD / LCD monitors. The most likely cause of the malfunction: faulty diodes, device backlighting.

There is no sound, the screen "wheezes" - most likely, the sound amplifier or microcircuit is out of order. Also read what to do if there is sound, but there is no picture.

Monitor is on, no picture - Perhaps the cause of the problem is in the video processor or in the receiving unit.

You should be aware that if a darkening of the board or rupture of elements is detected during a visual inspection of television equipment, then it is not recommended to immediately start replacing parts. Since such factors indicate a short circuit that could have occurred in another section of the TV. Therefore, if you do not eliminate the cause of the short circuit, but simply change the failed elements, then the situation will repeat itself.To repair television equipment, the following tools and equipment may be required:

Screwdriver Set;

hex keys (in rare cases);

pliers;

soldering station (for repairing modern monitors);

screen layout (can be downloaded on the Internet);

multimeter;

oscilloscope.

Many LCD screen problems can be dealt with on your own. But you should know that these screens require more careful handling than, for example, CRT TVs.First of all, the user needs to study the instructions for his model, and only after that start repairing the LCD or LED screen. You should be aware that LCD TVs use fluorescent bulbs for backlighting, while LEDs use LEDs. Image - DIY TV repair evgo

The TV may not function due to lack of power, to check this, you need to do the following:

Open the back cover of the LCD TV with tools.
Disconnect the wires that are connected to the device matrix.
Connect a working light bulb to the contacts.
Some panels have more than one light source, in which case they must be tested as well. This can be done as follows: pull out the TV matrix and connect it to the network, it will immediately become clear which lamp is out of order.

After the faulty luminaire is found, it must be replaced. This procedure should be carried out as carefully as possible. In most cases, the lamp can be taken out even without removing the matrix - you need to move the protection elements and get the burned out part using a soldering station. Then a new lamp is installed in the same way.An important rule is that the new lamp must be completely identical to the old one.

Another common problem with these models is damage to the monitor. But in this case, it is not advisable to repair LCD TVs, since it is easier to buy a new screen. This test scheme can also be used to repair plasma televisions of all types. Read also how to fix the LED backlight yourself.

Each manufacturer has its own weak points, so below is a selection of the most common LCD screen breakdowns.

Often, users of this brand are faced with such a problem that when turned on, the device beeps without interruption. This symptom usually indicates that a leak has occurred. It is recommended to try replacing the preout stage diode.

Another common problem is that the monitor turns on and off itself. The main reason for this breakdown is a failed transistor, it is necessary to replace it. It is recommended that such malfunctions be eliminated on their own only by people who have experience in repairing television equipment.

DIY Philips TV repair is recommended if the problem is minor: settings are lost, cable replacement is required.

If the breakdown is complex, then it is better to entrust its elimination to specialists who will not only professionally perform repairs, but also issue a guarantee. Therefore, if the repaired screen stops working again, the user may demand a refund.

LG flat screen owners may have a problem saving settings. Such a problem does not require contacting the masters, you can repair the LG TV yourself. It is enough to switch the device to another operating mode, and all settings will be saved.

As well as in the case of other LCD models, if the problem is serious, then it is not recommended to repair an LG TV with your own hands, it is better to contact a specialist.

Despite the fact that today the majority of consumers prefer the most modern plasmas, CRT screens are still in demand. These TVs have their advantages: they are inexpensive, easy to operate, and the quality of the transmitted picture is still high.

The main problems with CRT devices:

the CRT TV does not turn on - just like on devices of a different type, first of all, you need to check the integrity of the fuses;
a diode bridge malfunction is a common problem with CRT receivers, you can fix the TV only after making a "ringing", you will need a multimeter from the equipment;
breakage of the posistor is considered the most serious problem; in order to check, it is necessary to turn off the power circuit of the TV, then start it again. After, observe the lamp, if it goes out, it means that the posistor is out of order. First of all, you need to adjust the resistance of the network, and then replace the part;
burnout of a transistor or capacitor - such a malfunction can be easily replaced by visual inspection (on black carbon parts), repair is carried out by replacing the part.

Below is a list of problems encountered by owners of CRT TVs.

The Rubin TV buzzes loudly when connected - most likely, the photodetector needs to be replaced.
The ruby does not turn on, the indicator does not light up - voltage surges in the transistor.

The Horizon TV does not have a blue tint, as well as the white balance is disturbed - this is mainly due to a break in the resistor.
There is sound, no image - the cause of the problem lies in poor contact of the power connector of the screen board. It is recommended to use a soldering iron to solder the harness into the Horizon TV board.

The screen does not turn on - there is a problem with the power supply.
A horizontal strip appears on the monitor - repairing a Vityaz TV consists in fixing a problem in the frame scan microcircuit.

Since the malfunction of the power supply is one of the most common problems of all types of TVs, it is necessary to study it in more detail.

Since all models of LCD monitors do not have fundamentally different design differences, therefore, the diagram below can be applied to all TVs (Toshiba, Horizon, Samsung, Sony, Rubin).

Repair of monitors equipped with a picture tube, for example, such as (ruby, sharp 2002sc, sony trinitron, vvk), as well as repair of Samsung TV, Panasonic. always starts checking the power supply.

Testing is carried out using an incandescent lamp, but before performing the procedure, it is necessary to disconnect Sharp c2002sc, Samsung or another screen from the load (horizontal cascade). The horizontal scan voltage can vary from 110 to 150 V, it depends on the size of the picture tube. It is required to find a sweep filter capacitor in the TV circuit. Next, you will need to connect a light bulb, in order to remove the load, it is necessary to unsolder the choke and the fuse through which the JV element consumes power. This scheme is used for sharp screens since 2002sc.

After that, connect the power adapter to electricity and measure the voltage, if the values exceed the norm, you will have to check the feedback circuit of the power supply. If the power supply unit is in good condition, then the light bulb is removed and all the elements are soldered into place. This is the basic information on how to repair a TV with your own hands.

DIY TV repair

TV repair after a thunderstorm Hello everyone! Summer is a good time, but natural phenomena, such as thunder and lightning, sometimes cause a lot of trouble and expense for users of electronic equipment. This article is just devoted to such troubles, or rather the repair of the TV, which has become a victim of the elements. As usual, we will put this situation on the shelves using a specific example. So, …

Repair of the Daewoo KR29M5-MT TV Hello everyone! In this article I will tell you about the repair of the Daewoo TV, model KR29M5-MT, which I made. On my site there are many articles on a similar topic, but this case, I think, is worthy of a separate discussion, since several breakdowns occurred on one TV at once, independent of each other. Since this case ...

TV repair, fuse blows Hello everyone! It often happens that the TV suddenly stops working. One gets the impression that they just turned off the light. But in fact - it's a blown fuse in the TV. Moreover, if this fuse is replaced, it immediately flies out again.So what could be the reason for this behavior of our television receiver? The reasons may be ...

TV power supply repair Hello everyone! Chinese-made TVs have firmly entered our life, attracting us with their rather low cost. But, like other equipment, they also tend to break. In this article we will analyze one of these "masterpieces" and try to repair the TV with our own hands. Chinese TVs, for the most part, are structurally very similar and differ ...

Repair of a CRT TV LG Hello everyone! This article will focus on the simplest, but at the same time the most common, malfunctions of LG CRT TVs with a diagonal of 29 inches (72 cm). Such malfunctions can be dealt with with the skills of working with a soldering iron, as well as with normal vision. No more skills, except for holding a screwdriver in your hands, in this ...

Repair of TVs Hello everyone! In this article, I want to tell you about the do-it-yourself TV repair method, or rather, what you need to look at first in case of a particular breakdown. This method is based on personal experience and the experience of most telemasters. So, for example, a TV comes to you for repair, in which a line transistor has failed. ...

Hello everyone! When repairing various electronic equipment, the primary task is to determine the malfunction. Often, the search for the cause of the failure of a particular device takes much longer than its elimination. This article suggests some technique for troubleshooting modern TVs. When there are situations when the TV does not show any signs of life, I try to adhere to this particular method ...

Fixing a CRT TV Nowadays, the time of mass distribution of disposable equipment, the repair of CRT TVs looks like an anachronism. But, nevertheless, such devices, released decades ago, continue to reliably serve their owners, delighting them with natural color rendering and a certain inviolability of life. Unfortunately, there are no eternal things, and sometimes the owners of rarities have to get acquainted with such an area of knowledge as ...

Hello everyone! We are all upset and even nervous when our TV set breaks down, because now we have to look for a good TV technician or service center, deliver our device to the place of repair. Another important point is a waste of time, effort and, most unpleasant, money. What if you try it yourself? In this article we will look at how you can produce ...

Everybody has a TV at home. But it so happens that sometimes this kind and loyal friend refuses to show us his favorite TV shows 🙁 In general, the TV is broken. What to do? How to fix a cheap TV? It's very simple - try it yourself, repair the TV with your own hands! Tell me - it's not real, yet how real! Possible malfunctions and methods of their elimination are presented below.

Modern technology, on the one hand, has become more complex, and on the other, more compact and completely repairable. Of course, there are complex malfunctions that are not easy to detect and repair, for which it is necessary to have special equipment and devices, we will not talk about this. We are interested in common faults that can be detected visually and corrected with a screwdriver and a soldering iron. Take any DVD player, LCD TV or display, basically all the circuitry of the device consists of a main board (motherboard) and a power supply unit (power supply). You should not go into the motherboard, you can only harm it without experience, but we will "chicken out" the power supply.

Let's get started. Liquid crystal TV, I do not name the brand, the principle of operation is the same, but in design they differ slightly.Carefully unscrew all the screws on the back panel, put them in a jar or box so as not to lose. Disconnect the back cover. Caution: the front and back panels can be latched together, carefully and carefully try to separate them with a screwdriver. If you opened it successfully, you can see what is inside. Liquid crystal TV, I do not name the brand, the principle of operation is the same, but in design they differ slightly. Carefully unscrew all the screws on the back panel, put them in a jar or box so as not to lose. Disconnect the back cover. Caution: the front and back panels can be latched together, carefully and carefully try to separate them with a screwdriver. If you opened it successfully, you can see what is inside.

Everything seems to be fine, but the capacitors in the upper left corner look suspicious, they swelled up, the upper part cracked and a yellow substance leaked out of the slots.

This means that the capacitors have leaked, their characteristics have changed greatly and, accordingly, they cannot work normally and perform their function, as a result of which the TV simply does not turn on, or may turn off spontaneously, there may be other symptoms. The most correct and only way out of this situation is to replace all suspicious capacitors.

First, we determine what the denomination of the defective parts is.

In our case, two 1000mF x 25V capacitors and two 1000mF x 16V capacitors are faulty. Unfortunately, in our time, manufacturers put capacities at the output of the power supply without a voltage reserve. Therefore, capacitors cannot withstand increased modes, especially during standby operation, without load.
We will not tempt fate a second time and change the capacitors with a voltage margin. Instead of 1000mF to 16V, we will put 1000mF x 35V, respectively, the 1000mF x 16V condensers will be changed to 1000mF x 25V.
It is better to change the containers sequentially, and not all at once, you can get confused.
We solder one and, observing the polarity, solder the other.

We did everything right. We put the board in place and fasten it. Now you can test the TV in operation. Let it work for a couple of hours for complete confidence, you can touch the capacitors, only carefully, they should not get too hot.

Attention: When changing capacitors, do not mix up the polarity, otherwise you will find out how they explode. When using for the first time, move to a safe distance or cover the power supply with the TV back cover.

Good luck with the repair! Come to our FORUM.

If colored spots appear on the TV, even with the color off and the demagnetization of the kinescope does not help, then you need to adjust the color purity. Let's take a closer look at this process: More ...

If you have a UPS (uninterruptible power supply), a TV or monitor starts to turn off spontaneously, noise is visible on the screen, the raster size changes, etc., then, in addition to the reasons described, this article often also occurs such as the loss of contact in connectors and elements on the board. More details ...

VS
Moderator

Posts: 3332
Location: Kiev

Group:

VS
Moderator

Posts: 3332
Location: Kiev

Group:

Do-it-yourself TV repair is a responsible business, since today a large number of different models (LCD, LSD, CRT) are presented on the market, each of which has its own technological features. Therefore, the approach to each type of TV is individual; in some cases, special skills will be required (knowledge of electronics, experience with a soldering station).

Before proceeding with the repair of television equipment, it is necessary to find out the cause of the problem.

The most common problems are:

TV screen does not turn on - this can happen with an old picture tube screen and with the most modern television panel. Basically, this symptom is characteristic of a blown fuse.When repairing, it should be borne in mind that the appropriate fuse must be selected for each model. And also experts recommend paying attention to the diode bridge, power supply, wire, perhaps the cause of the malfunction lies in these elements. Read also what to do if Samsung TV does not turn on.

Faint, barely noticeable picture - such a breakdown happens with LCD / LCD monitors. The most likely cause of the malfunction: faulty diodes, device backlighting.
There is no sound, the screen "wheezes" - most likely, the sound amplifier or microcircuit is out of order. Also read what to do if there is sound, but there is no picture.
Monitor is on, no picture - Perhaps the cause of the problem is in the video processor or in the receiving unit.

To repair television equipment, the following tools and equipment may be required:

Screwdriver Set;
hex keys (in rare cases);
pliers;
soldering station (for repairing modern monitors);
screen layout (can be downloaded on the Internet);
multimeter;
oscilloscope.

Many LCD screen problems can be dealt with on your own. But you should know that these screens require more careful handling than, for example, CRT TVs.

First of all, the user needs to study the instructions for his model, and only after that start repairing the LCD or LED screen. You should be aware that LCD TVs use fluorescent bulbs for backlighting, while LEDs use LEDs.

The TV may not function due to lack of power, to check this, you need to do the following:

Open the back cover of the LCD TV with tools.
Disconnect the wires that are connected to the device matrix.
Connect a working light bulb to the contacts.
Some panels have more than one light source, in which case they must be tested as well. This can be done as follows: pull out the TV matrix and connect it to the network, it will immediately become clear which lamp is out of order.