DIY interskol electric chain saw repair

In detail: do-it-yourself repair of an interskol electric chain saw from a real master for the site my.housecope.com.

Repair chain saw interskol self video

The INTERSKOL PC-16 2000T chain saw is equipped with a powerful 2-kilowatt motor. The Oregon bar measures forty cm (16 inches). This length is enough to cut down small trees, collect firewood, and carry out construction work. The saw allows you to cut wood not across, not along the grain. The spike retains the oil-like grip better on the workpiece and reduces operator stress. Saw weight (fully equipped) - 6 kg.

Protection against accidental activation increases the safety of work.
For trouble-free operation, the chain is automatically lubricated with a plunger pump.
The inertial brake stops the chain in case of emergency (nettles, kickback).
The volume of the oil tank is eighty-five milliliters.

Due to the affordable price, you can buy the INTERSKOL PTs-16 / 2000T electric chain saw for use in the country or in a suburban area. In the online store "220 Volt" you will always find a suitable delivery option without paying for the order.

What remains for our client to do is that chain saws are suitable for sawing wood not in the transverse, not in the longitudinal directions, and the PC-16 / 2000T is no exception.

This common hearing tool is equipped with a powerful motor, gearbox and Oregon chain saw. The chain is lubricated by a plunger pump located in the gearbox housing.

The saw has a number of safety non-blocking devices. Electric saw repair. DIY electric saw repair, short video about. The main thing is that the power-on lock button does not allow accidental pressing of the start key. On the additional handle there is an additional switch that blocks the engine. Thus, the engine can only be started by grasping both handles.

Video (click to play).

Additional safety device installed on the instrument. the inertial brake lever, responsible for emergency braking of the saw chain, for which the saw rebound design is intended (this happens when careless work).

Functions not possible: soft start, electronic motor protection, motor braking, chain brake

The Russian company "Interskol" was founded in one thousand nine hundred and ninety-one, its main office is located in Khimki, Moscow region. Do-it-yourself electric saw repair video all user video: vyacheslav viter. The products of this company are power tools of various classifications (drills, saws, hammer drills, grinders), its products are distributed in numerous CIS countries, in some regions of Europe and the Middle East.

According to the research carried out, Interskol is the most popular domestic company in our country. And when in two thousand and nine, oil-like acquired the Italian company Felisatti - the tools became more multifunctional.

One of the advantages of this company is that, like oil, it produces quite diverse products, without buying an expensive unit yet, they buy some small one to do, as it is also called a tool, in order to check the quality of workmanship, not visually make sure of the reliability of this manufacturer.

In the current situation, the products of this Russian brand mean more than eighty types of power tools of various classes of non-functional. Not the main share of this assortment is made up of hand-held power saws. Do-it-yourself repair of Husqvarna and Calm chainsaws: video.Adjusting the carburetor, you can repair the calm 365 chainsaw with your own hands - video. About one of them, speaking specifically about the Interskol PC-16 / 2000T model, we will not talk about the review here.

Among the main advantages of this electric chain saw should be noted the already familiar lightness, convenience and low speed of work. As well as models of other brands, this tool is capable of cutting both longitudinally and not in transverse mode. Among its advantages, it is also worth noting a powerful motor, a reducer, and a reliable tire with an Oregon chain. The chain is lubricated when using a plunger pump, which is usually not a problem. They were voiced in his review by Stas Shutov from Yaroslavl:

Completely, saws well, used it for one year, then the oil pump broke down. I had to contact the service not to pay money not so much for a new pump, but at the same time for services for its replacement. A year later, history repeated itself. As a result, for repair gave almost as much as the saw itself cost.

Not although, a very significant drawback regarding the fact that it is essentially impossible to get spare parts for this saw. Considering that the chain is not a tire, grind down quickly enough -> the myth of the nuance has a very negative effect on the full operation of the saw. Therefore, our assessment for quality will be average - only seven points.

Detailed disassembly not chain assembly electric saws Dnepromash is not similar with a description of the features. How to check.

One of the main characteristics of the convenience of the hand-held electric chain saw Interskol PC-16 / 2000T are safety devices in the guise of an engine blocking button, not a brake lever. This oil is ideal for summer cottages, but in more industrial areas it is better to choose a saw with a higher power. Do-it-yourself chainsaw repair (repair of a Chinese chainsaw). The chain enters the wood very gently so that it does not get stuck in the wood like oil, it must be sharpened regularly. The saw cut turns out to be very neat and uneven. A large, uncomfortable handle allows you to work with the saw for a long period, without a forced break.

The amount of oil is controlled using an external level, which is also very useful, but this function allows you to protect the saw from idle operation and, as a result, from overheating. Do-it-yourself chainsaw repair (repair. True, as with many similar saws, the oil runs out quickly enough, you do not have to constantly interrupt work to refuel the saw. In addition, the volume of the tank itself is small, which also causes certain inconveniences with the use of this tool.

If the oil level is not monitored, the pump can quickly break down. This, for a reason with such a feature, of course, there are some inconveniences when cutting, so the score for such a criterion is only six points.

The Interskol PC-16 / 2000T model also has problems with functionality. A thick tree cuts with difficulty, the chain can periodically jam. If you need this common rumor tool to quickly cut wood for a fire, as it is also called a fireplace, the saw will cope with this task very quickly. The review by Vadim Krupyshin from Moscow provides more detailed information:

Due to the great busyness last summer, my summer cottage was heavily overgrown. I tried to start sawing by hand, after half an hour I was exhausted and did not decide that I had to take an electric saw. I decided to stop my choice on Interskol, to be honest, I was attracted by its low cost, I didn't really think about quality in those days. And in addition, I already had the tools of this brand, but I did not fully trust him. DIY repair of chainsaws and chain saws. I bought a saw, came to the dacha, poured oil, now in twenty minutes all the work was done! True, several times there were problems with the clamping of the tire, due to the fact that he began to saw at the wrong angle. For a couple of seconds, I pulled up the chain and did not continue to work. Not a bad saw for a quite adequate price.

An additional recommendation from the owners of this tool is that it is advisable to fill in the oil with a more liquid one, so that the chain is fully lubricated. We will not give the maximum rating for functionality here, but oil has earned a solid eight points.

Most recently, the cost of this saw was very attractive - only three thousand rubles. Alas, for some reason, the manufacturer decided to raise the price by almost half now the tool costs almost as much as the best Makita electric chain saw.

Not such a change in pricing policy will have a positive effect on the popularity of the product, because the choice here will be obvious. Although a couple of years ago, probably the users between Makita not Interskol chose the products of the second brand precisely because of its low cost, they were not satisfied with such a choice, because they managed to save significant funds.

Today this model costs 6-7 thousand rubles, and for such a price you will find a better quality, unreliable electric saw. Therefore, the score for this item will be the lowest - only four points, since such a price is absolutely unjustified.

If you find an error, please select a piece of text do not click CtrlEnter.

Showing one through fifteen of forty three (three pages in total)

This, you can buy a chain power saw not so much from our online power tool store. it has several undeniable advantages over competitors:

A rich assortment of equipment from European, Chinese, American non-domestic manufacturing companies. Here they buy a high-quality electric chain saw of the following brands: Dnepromash, Druzhba, Zenit, EUROCRAFT, Favorit, FERM, FIAC, Forest, Forsage, Forward, not other brands.
Our client retains chain saws with prices lower than those of similar stores, not only in the “real” segment, but also in the virtual segment at the same time. This is not an advertising statement, but the most stubborn fact that is easy enough to verify.
Delivery of power tools is carried out throughout Ukraine. Now there is no difference at all where you need to buy a chain electric saw - in Donetsk, Kharkov, in another Vradievka. Residents of the city of Nizhyn, of course, do not look at our warehouse with their own eyes. by hand make sure of the role of the power tool and it happens to issue an installment plan for the most expensive categories of goods.

The difficult choice of the most suitable tool is greatly facilitated by detailed descriptions of each product, additionally high-quality photos electric saw chain not reviews about them. If you want to look at the tools of only a certain manufacturer (nettles, chain saws of the ZENIT brand), this is easy to do using a search by category not by brand.

Choose, buy, enjoy your work!

Electric saws are an indispensable tool in a summer cottage or in a private house. It easily copes with cutting thick branches, planks and various wood materials. Even the most reliable tool has its own degree of wear, it is periodically required to correct minor or major breakdowns. Do-it-yourself electric saw repair is possible only in some cases and in the presence of certain skills and tools. Often the tool has to be returned to the service. But there are some breakdowns that can be easily corrected on their own.

In order to master the skills of repairing electric saws, it is necessary to understand their design. The main element that cuts the material is the saw chain, which is driven by the motor. The chain itself is a set of cutting links, which are held together by hinges. The movement of the chain is carried out on a plate, which is called a tire. This part is made of high quality steel, which is not subject to chips, scratches and corrosion - this is the main indicator of the quality of the tool. Tires are distinguished by design:

welded;
one-piece with a removable tip;
solid with carbide tip.

A welded bar is something like a "sandwich" that is welded from three parts into one, with a driven sprocket riveted into the structure.One-piece design with replaceable tip - one sheet product, ideal for long instruments. In such a tire, the main load falls on the roller bearing of the driven sprocket. One-piece configuration can reduce friction loss by 8-10%. If the tool has a solid carbide tire, then it is optimally suited for work with high loads, as well as for use in conditions where there is a lot of sand, dust and dirt.

1. When working with an electric saw of any configuration, it is necessary to remember about the possibility of a "kickback" - throwing the tool towards the person performing the work. This situation occurs when the very end of the guide bar rests against the material being cut. To avoid injury in such a situation, manufacturers equip saws with an automatic chain brake.

2. An automatic chain brake is also called an inertial drive, which works thanks to a shield located in front of the left hand of the person performing the work. Before starting work, this shield is placed in a position closer to the hand so that it can be quickly activated if necessary. If there is a moment of kickback, then the operator's hand rests on this guard and the chain stops. The position also changes due to the inertia arising from the impact. Such a system makes it possible to reduce the likelihood of repairing electric chain saws, since its main mechanism will not be damaged during an impact.

3. Another system that prevents wear and damage is automatic chain lubrication. Oil is poured into a special reservoir, which, during the operation of the saw, is transferred through the oil pump to the drive sprocket and chain. Some models even have an oil supply regulator, since different amounts of oil are needed for different intensities of work. For example, repairing a Makita electric saw involves inspecting the oil supply system.

4. Electric chain saws have some drawbacks or weak points. One of them is the gearbox design. The torque is transmitted to the chain through a gearbox, which is rigidly connected to the anchor of the electric motor. This design transfers all the loads to the motor, that is, if the workpiece contains solid inserts or the saw chain is dull, then it will not slide so smoothly over the surface. This will result in overheating of the motor or wear of some of its parts. As a preventive measure, it is necessary to sharpen the saw in a timely manner and not to put pressure on it while working. Often they come to the service repair of a Parma electric saw with this kind of malfunction.

5. The second weak point of saws with an electric motor is the dependence on the voltage in the network. If it falls, the load on the motor increases, in models that are not equipped with thermal protection of the motor, the increasing load leads to its combustion. But the temperature rise protection also has disadvantages, since at low voltage it is triggered, reducing performance. For example, the repair of an Interskol electric saw is often reduced only to an increase in the voltage in the network, after which the tool functions properly.

If the saw does not turn on, it is necessary to check the presence of power, the integrity of the wires and connections.
If everything is in order in the power supply, it is necessary to check the chain brake, which blocks the operation of the tool. To eliminate this problem, you must move the brake shield to a different position.
If the measures described above did not turn on the saw, then it is necessary to check the integrity of the cable and plug.
If the saw power has decreased, productivity has dropped, it is necessary to replace the carbon brushes, which, apparently, are worn out.
Quite often, the chain does not start to stop immediately, but after a certain period of time. The longer the saw is used, the longer this time interval becomes.To get rid of this problem, it is necessary to replace the saw brake band, which has worn out over time.
The saw often produces an unpleasant, cutting sound in the ear. This sound often appears due to a lack of oil in the mechanism or due to contamination of its conductive grooves. Troubleshooting is simple - add oil and clean the furrows.
It is important to use only original spare parts recommended by the manufacturer for repairs. Using third-party spare parts often leads to tool breakage or hazardous situations.
If there is damage to the case, then for your own safety, the saw must be returned for repair.
Do not replace cutting parts of the tool that are not recommended by the manufacturer or do not fit in design.

One of the saw elements that you need to keep track of yourself is the chain. It must be sharpened prophylactically, since if it is delayed with this process, it will no longer be possible to repair the electric chain saw with your own hands. It must be taken to a service where they will be sharpened on professional machines.

1. Extending the service life of the saw blade:

before starting work, make sure that there are no solid metal objects in the workpiece. If there is a contact of the cutting element with a metal object, then a notch or chip will remain on the chain, which can no longer be removed;

it is impossible to carry out work on the ground, as the deepening into the ground will clog the oil grooves, as a result of which the chain will remain without normal lubrication and will wear out faster;
it is necessary to monitor the saw wedge, it must not be allowed, as this overheats the metal and reduces its service life.

2. How to determine if the saw needs sharpening. To do this, it is enough to pay attention to the shavings - if they are small and slightly darker, then the chain is dull. This is because the blunt edges do not remove the required cutting layer, which leads to chip breakage. Also, the quality of saw sharpening is determined on the basis of visual inspection, there should be no radii on the saw part, no damage in the form of torn sections, the shape of the tooth and cutting edge should be the same as on a new tool.

If all these factors do not meet the necessary requirements, then the saw needs to be sharpened. Continuing to work on a blunt saw will have an impact on productivity as well as the service life of the saw. With sharpened elements, the load on the motor increases, it overheats and all its elements wear out faster than the specified period.

3. How to sharpen an electric saw yourself:

a special tool is required for sharpening, this is a set of round and oval files, a mandrel and a caliber;
sometimes the kit additionally includes a hook for cleaning the chain slots from chips;
a round file is combined with a mandrel;
flat file and caliber are used separately;
the chain is sharpened on the saw blade itself;

for sharpening on the machine, the chain is removed from the bar;
the chain is installed on the guide of the machine and tightened with a roller and a ratchet, which hold it by the cutting tooth;
the machine has a protractor that sets the sharpening angle;
the abrasive wheel is lowered, with its help an insignificant layer of metal is removed - about a few tenths of a millimeter. This is the process of straightening and sharpening the chain;
after straightening one tooth, the guide is rearranged to the next, and so on;
this type of sharpening allows you to withstand the rigid framework of dressing and sharpening the tool;
if there is a desire to purchase such a machine for yourself, then it is recommended to purchase not an electric version of it, but a manual one, since its cost is much lower. The machine allows you to push back the repair of Bosch electric saws and any other manufacturers.

The electric saw is preferred for one good reason - it is very lightweight, and therefore easy to use. Of course, you can't go far into the forest with her - the network cable won't let you. But in use near the house (for sawing logs, preparing firewood, trimming trees, during construction and repairs), there is no better tool.During operation, especially with frequent use, the electric saw starts to junk: it emits incomprehensible sounds, smells, does not slow down on time or does not turn on at all. There is nothing to be done - any technical device does not last forever. And every working day shortens his life. But there are breakdowns that only a professional service can handle (for example, a damaged case). And there are cases when you can reanimate an electric saw with your own hands, with effort, knowledge and skill.We have made a selection of practical tips on how to repair a saw yourself, without going to a specialist.Any breakdown does not occur from scratch. It is often rooted in poor build and quality, or mishandling. If you buy a quality tool from a reliable manufacturer, it is not so easy to "ditch" it. But still, most often malfunctions arise due to:Power surges. If the instrument has built-in fuses - protection against voltage surges, then it will withstand deviations from 220 V by 10% in one direction and the other. Not more. If there is no protection, the motor will burn out.Non-compliance with recommendations. Often the instructions say: half an hour of work, 15 minutes off. Once it is written, then it must be observed. Avoiding the mode means overheating the motor.Untimely lubrication. In the overwhelming majority of electric saws, lubrication is automatic. Make sure not to run out of oil. Remember that running dry is death for the motor. If the oil does not automatically flow to the "asterisk", then lubricate it yourself, every 3-5 hours of operation.Overload capacity. If it happened, it is also your fault, not the manufacturer's. If it is indicated that it is possible to saw logs up to 5 cm in diameter, then cutting a ten-centimeter trunk is clearly too much.Design flaws. This is already an oversight of the manufacturer. The most common disadvantage is the rigid coupling of the gearbox with the armature. When transferring a strong load (blunt tape or hard wood), it wedges and heats up. Gears wear out quickly. The way out of the situation is to sharpen on time and avoid overloading.
The "golden" rule of self-repair is to use only original parts and spare parts. If you try to install inappropriate elements of a different brand and configuration, then this is a 100% guarantee of future breakdown and failure of the electric saw.
Before you fix the tool, create the necessary base for yourself. You will need:1. Original factory parts from the same manufacturer.
2. Pliers, wrenches
3. Electrical tester, voltmeter.
4. Soldering iron.
5. Round and oval files, mandrel and sharpening gauge.
6. Machine for sharpening the chain (ideally, you can sharpen it by hand).It's hard to believe, but almost half of the breakdowns are due to a dull chain. It brings with it an increase in the load on the motor, its overheating and premature wear. When the sawing band is stupid, the gears of the reducer, the drive sprocket, bearings, etc. break.
The first sign of dullness is dark and fine sawdust. The teeth cannot remove the required layer, so the chips will be crushed. If you inspect such a saw, you can see defects on the edge and even torn off pieces.
Craftsmen advise sharpening the saw as often as possible. If you delay with this process, then you will need to give the device to the workshop. Sharpening the file at home is possible on a special machine or manually.
If you sharpen regularly, you can do it yourself, observing the rules:

Sharpening must not be carried out directly on the ground, as dirt can clog the oil grooves.

Sharpening devices are used: files (circle and oval), mandrel and caliber.

The sharpening angle must be greater than 30 degrees.

The file should protrude slightly above the tooth.

Sharpen the teeth one at a time, scrolling the tape.

After sharpening the teeth, using a gauge, you should straighten the cuts (protrusions that are responsible for the deepening during the sawing process).

If the cuts protrude slightly beyond the line of the teeth, then they can simply be cut with a file.

As you can see, troubleshooting is easy, and there is also difficult. Remember that with proper use and maintenance, the need for repairs will arise much less frequently.Do-it-yourself electric saw repair is of interest to all owners of such tools. It should be understood that any device has its own degree of wear, therefore from time to time it will be necessary to repair various malfunctions.Electric saws are widely used in suburban areas for cutting branches, boards and trees.Electric saws are indispensable tools for summer cottages or private homes. They are able to easily cope with sawing branches, thick boards, as well as various wood blanks. To repair this device, you need to have some skills and tools. In most cases, electric saws are repaired by experienced professionals. However, there are some types of faults that you can easily fix yourself.Elements that will be necessary in order to repair an electric saw with your own hands:

original accessories recommended by the manufacturer;

files in the form of circles and ovals;

mandrel;

caliber;

chain sharpening device.

The following breakdowns are most common:

If the tool does not turn on, you will need to check the power supply, the condition of the cables and connections.

If the supply network is in good condition, it will be necessary to check the chain brake, which stops the operation of the device. To fix this problem, you need to change the position of the brake element shield.

If the power saw fails to turn on, then you will need to check the condition of the cable.

If the power of the saw has decreased, this means that the brushes are worn out. In this case, they must be replaced.

Quite often, the chain does not stop immediately, but after a while. The longer the file is used, the longer this period of time becomes. To fix this problem, you need to replace the saw brake band.

In some cases, there is an unpleasant sound during the operation of the saw. It most often appears due to insufficient amount of oil in the device or due to clogged grooves that pass it. To rule out a malfunction, you will need to add oil and clean the grooves.

When carrying out repair work, only original accessories recommended by the manufacturer must be used. If elements from third-party manufacturers are used, this will lead to breakdowns of the device or the occurrence of unforeseen situations.

If the case is damaged, it is best to return the tool for repair.

It is not allowed to replace the cutting elements of the device that are not intended for it.

One of the components of a saw that you need to keep an eye on is the chain. It needs to be sharpened from time to time. If you tighten up with this process, then you will not be able to repair the electric chain saw yourself. In this case, it will have to be sent to a service where sharpening will be carried out on special devices.Saw chain lubrication system.You can extend the service life of the sawing element as follows:

Before starting work, you need to make sure that there are no solid metal elements in the workpiece.If the element for cutting comes into contact with the metal workpiece, then notches or chips will appear on the chain, which cannot be removed in the future.

Do not sharpen on the ground, as digging into the ground can clog the oil grooves. As a result, the chain will not be lubricated and will wear out quickly.

Be sure to keep an eye on the saw blade. Jamming should not be allowed, as as a result, the metal will overheat and reduce its service life.

It should be determined whether it is necessary to sharpen the saw. To do this, you need to pay attention to the chips: if they are small or have a dark color, then the chain is dull. Blunt edges are not able to remove the desired cutting layer; as a result, the chips are crushed. The quality of the sharpening of the tool can also be determined by inspection. The part that is used for sawing must be free of defects in the form of torn pieces. The shape of the serration and cutting edge must be the same as when not in use.If these factors do not meet the relevant requirements, then the saw must be sharpened.If you perform work using a blunt file, this can affect productivity, as well as the period of possible use of the tool.

Economical repair electric saws for only a thousand rubles. Disassembling the saw Interskol PC—16.

Is your TV, radio, mobile phone or kettle broken? And you want to create a new topic about this in this forum?

First of all, think about this: imagine that your father / son / brother has an appendicitis pain and you know from the symptoms that it is just appendicitis, but there is no experience of cutting it out, as well as the tool. And you turn on your computer, access the Internet on a medical site with the question: "Help to cut out appendicitis." Do you understand the absurdity of the whole situation? Even if they answer you, it is worth considering factors such as the patient's diabetes, allergies to anesthesia and other medical nuances. I think no one does this in real life and will risk trusting the life of their loved ones with advice from the Internet.