DIY hood insulation repair

In detail: do-it-yourself repair of the hood insulation from a real master for the site my.housecope.com.

In winter, during severe frosts, every car owner is faced with the problem of prolonged engine start-up. The hood insulation will help partially solve the problem. Thanks to the additional thermal insulation, the car will cool down significantly more slowly, which will save on fuel when the car is warming up and increase the engine's operating life.

According to the laws of physics, everyone knows that the heated air rises rapidly, therefore, by installing a hood insulation with your own hands, you can exclude the rapid cooling of the power unit. Most modern products have a porous structure, due to which heat is retained for a long time in the car body.

Simultaneously with insulation, it is used as soundproofing of the hood

Few people understand the abundance of proposals from insulation manufacturers; it is especially difficult to determine the characteristics of a product by what the material is called or looks like. That is why, before purchasing insulation for the hood, you should first study its types and features.

The self-adhesive material is based on a polyurethane foam filler, which can be covered with PVC, PET, anti-adhesive film, textiles. The main advantage lies in the double effect, it helps to improve the sound and heat insulation of the car.

The approximate cost is 65-85 rubles / m2. It should also be noted that this option is tightly fixed on the surface of the hood and it is fireproof.

An excellent option for insulation under the hood, which is equipped with an adhesive base on the seamy side. The product consists of polyethylene foam with a petrol-resistant polyethylene terephthalate surface. The thickness of the canvas is 4, 8 or 15 mm, so the product, even without foil, copes well with keeping heat. Price - more than 230 rubles.

Video (click to play).

Tiviplen is used for thermal insulation of any car, regardless of modification. The coating does not absorb moisture and does not undergo decomposition; it can withstand temperatures ranging from -40 ° C to + 70 ° C.

As it is also called, penofol is made from polyethylene foam and covered with foil on one or both sides. Even if you paste over the car with your own hands with the thinnest coating, the level of heat retention in styzol will be much higher than analogues, since due to the reflective surface it provides the effect of a thermos.

This material does not accumulate or conduct electricity. It is characterized by increased elasticity, resilience and resistance to mechanical stress. Also, the product is non-flammable, it is considered moisture resistant, durable, environmentally friendly. It is not difficult to glue the hood with this material with your own hands, the sticky layer fixes the product well on a smooth surface.

Elastic insulation material with adhesive surface and foil coating. The thickness of the web is in the range of 3-10 mm.

But here it should be borne in mind that the larger the parameter, the higher the cost, and the price also depends on the number of foil layers. Prices start at 160 rubles per sheet.

The main advantage of this option is low cost and efficient heat retention. The price varies in the range of 50-200 rubles / m 2, this indicator is directly influenced by the thickness of the canvas.

If the car owner wants to install the insulation on his own, he must definitely study how to make high-quality thermal insulation of the car hood. To do this, you can watch a tutorial video or follow the step-by-step instructions.

First of all, you should prepare the necessary consumables and tools.In order to make insulation you will need:

thermal insulation sheet;
stationery knife;
roll paper;
felt-tip pen;
scissors;
Scotch.

Take measurements of the hood sections, transfer the data to paper. Be careful in the calculations, otherwise it will lead to an overuse of material or the need to create a new pattern.

On average, insulation of a car hood requires 0.6-0.7 m 2 of heat-insulating sheet.

Cut out the layouts from paper and sign so that you do not get confused during installation. Next, attach the blanks to the insulation and circle them with a felt-tip pen. Cut out the details according to the drawn shape.
The surface of the hood sections must be thoroughly washed with soapy water and dried, and then treated with a degreasing agent.
Gently stick the insulation parts according to the location. Remember, the use of adhesive in this process is not recommended, use only the material that is equipped with a sticky layer.

Rather time-consuming work, if the steps are performed correctly, will not take much time. On average, the insulation of the engine compartment takes no more than 30 minutes.

VIDEO: How to properly glue the insulation

Auto blanket is a woven insulation fabric that does not require preparatory work before use. The product is made of mullite-silica wool and facing textiles based on fiberglass.

To insulate the engine itself, use a car blanket

The advantages of a car blanket include:

environmental friendliness;
fire resistance;
soundproofing;
saving fuel resources during heating;
long operational life;
resistance to mechanical stress;
heat and sound insulation effect.

Despite a fairly large list of advantages, the product has a number of disadvantages:

relatively high cost;
small thickness at the joint with the hood;
reduced efficiency in the formation of cracks;
difficulties in selection and cleaning.

Warming the hood using a car blanket is considered the simplest method. It is enough to lay out the product in the engine compartment and hide all the cracks in the area of the joints.

When driving a car over long distances, the engine may overheat - the blanket completely blocks the exit of warm air.

After the insulation is installed, it remains to carry out the finishing touches - thermal insulation by closing the lattice.

Installing the radiator trim

For this purpose, you can use one of the methods:

the use of ordinary thick cardboard - an option is usually considered relevant for Gazelles;
installation of specialized radiator grilles, where there is a mechanism that closes the blinds;
installation of fasteners for the subsequent fixation of foil insulation.

Installation of thermal insulation should be carried out at a temperature of at least + 20 ° C.
If there is corrosion in the engine compartment, it should be pre-cleaned, covered with an anti-corrosion agent and paint.
It is very important to carefully fix the insulation on the surface so that, even during high-speed driving, it does not come off and fall into the rotating parts of the motor.
If climatic conditions change frequently in the region, care must be taken to ensure that the engine does not overheat on warm days. To do this, it is necessary to make regular stops and periodically open the engine compartment cover to allow cold air to flow to the power unit.

Whichever insulation is chosen, while driving, make stops and open the hood to release warm air

It is recommended to fix the thermal insulation under the hood with the possibility of its subsequent removal without harming the car.

Since the engine in the car runs on flammable fuel and has many contacts from the electrical wiring, you need to choose a fireproof insulation that does not accumulate electricity.

VIDEO: Experiment - is it worth insulating the engine compartment?

Taking advantage of the availability of free time and raking up garage supplies, I came across my old torn and leaky thermal protection of the hood of my OFB, removed and replaced at one time with a new one.It was a pity to throw it out, because the holes were, in my opinion, insignificant. In short, it was lying because it was priiigodizzooo.The idea arose to restore and drag.At hand there was some kind of aerosol quick-drying import glue (in my opinion it was bought for the carpet at the time) and a covering non-woven material (summer cottages) and building basalt insulation (visually surprisingly similar to the original contents of the heat shield).One and a half hours of work, 2 layers of non-woven on the front side and a thin layer of insulation to restore the hole (set to size).Based on what was initially, in my opinion, it turned out quite well.I can fit one of the local thirsty and suffering. One of the common methods of "seasonal tuning" is the use of a hood insulation. The operation is performed during the cold season. The action makes it possible to reduce the warm-up time, and to increase the cooling period of the power unit of the car. This has a beneficial effect on the functioning of the vehicle and fuel consumption. Image - DIY hood insulation repair

Bonnet insulation is an important process during which the engine compartment of a vehicle is insulated. As a result, the car engine warms up faster and cools down more slowly. You also need to insulate so that an ice crust does not form on the surface of the body part, which can damage the paintwork of the element.

Using the machine in winter means taking measures to protect the motor from heat loss. If this is not done, then the engine warm-up time will increase, and problems with starting the engine will appear. The issue of thermal insulation implies a comprehensive solution. After insulating, you need to take care of protecting the radiator grill (otherwise, cold air will cool the engine, and engine protection will not be effective). The final stage of insulation of the engine compartment is the insulation of the lower part of the car. You will need to insulate the air ducts located on the bumper of the vehicle.

Subcooling of the engine also negatively affects the consumption of engine oil. As a result, many moving parts of the powertrain are not lubricated. This leads to their rapid failure.

Operating the engine without thermal insulation during the winter period has a negative effect on the active cooling system of the engine.

Before insulation, you need to decide on the material with which heat will be stored in the engine compartment of the car. You can use homemade thermal insulation, or use ready-made solutions. Motorists have the opportunity to purchase a special insulation under the hood of the Arctic. The material is fixed to the hood cover from the inside. It has high temperature resistance and good insulating properties. The component is used both separately and together with a soundproofing coating.

Important! Measures to preserve heat in the engine compartment include insulation of radiator grilles and air ducts. For this, special covers are used.

Also, the motor protection is done independently. Among the materials that are used to insulate the engine compartment, they use foam, foil and felt. These components do not weigh down the hood and effectively protect the engine from heat loss.

Important! When choosing a heater, it should be borne in mind that some materials are not suitable for protecting the motor. During operation, the power unit heats up to excessively high temperatures, poor-quality or unsuitable insulation components can easily ignite.

One of the most effective ways to insulate a car hood is to use a car blanket. The material is heat resistant and boasts high efficiency.

A car blanket is used in the most severe frosts. It retains heat well. To protect the engine, the component is wrapped around the motor.

Motorists carry out the insulation of the car hood with their own hands.

Important! It is convenient to carry out the operation with a partner. With the help of one more person, the work on the installation of the thermal insulation of the car engine will be completed quickly and efficiently.

Self-development includes the following stages of work:

Training.
First, you need to dismantle the standard hood insulation (subject to its availability). The operation should be carried out carefully, taking care not to damage it. After that, the work surface is thoroughly washed and degreased.
Creation of templates.
You need to make a pattern for insulation. For these purposes, use old wallpaper or newspapers. It is necessary to carefully cut out the templates according to which the insulation elements for the hood will be subsequently cut. The remains of the thermal insulation are cut into small strips, which will subsequently be attached to the stiffening ribs of the body element.
Insulation installation.
When performing this operation, you need to stock up on a small roller, glue and insulation. If the work is carried out in an insufficiently heated room, use a construction hairdryer. An adhesive composition is evenly applied to the degreased work surface, then insulation is carefully applied from the corner and gradually fixed to the hood (if you stick the element right away, folds and air bubbles may appear). Afterwards, gently roll over the glued insulation. Care must be taken as bumps and dents may appear on the outside of the bonnet due to excessive pressure on the inside of the bodywork.

In some cases, depending on the hood design, it may not be necessary to create a pattern. The insulating material is attached to the body element using special clips. At the same time, it will be necessary to make holes in the insulation that will coincide with the places for attaching the clips located on the inside of the hood.

At the end of the cold weather, the thermal insulation is dismantled. Before new use, the insulation is repaired, and re-installed on the car.To quickly warm up the car in low temperatures, you need to use the thermal insulation of the engine compartment of the vehicle. First of all, the warm-up time is reduced, and, as a result, fuel consumption is reduced. The engine cools down more slowly, which is important for motorists who intensively use cars with short stops. For maximum efficiency, not only the hood is insulated, but also the air ducts along with the radiator grille.

Video (click to play).

Once again opening the hood, I caught sight of the shabby lining (insulation) of the hood, or as it is also called from the catalog - an insulator. Looked at the existential original 65840-4M400 costs from 2700r. up to RUB 7500 depending on the delivery time, it seemed to me to put it mildly expensive.

As a result, it was decided to restore the old upholstery, first it must be removed, by the way, the caps are disposable there, every last one broke! In general, I took off the trim, it looked like a material like felt, only softer, the front side was glued with some kind of cloth, which from time to time all flew away, you can see in the photo.

In general, a sad picture, I washed the trim properly, there was a lot of dirt, then dried it. I thought for a long time what cloth to tighten with, at first I wanted a carpet, but it burns very well, I checked it personally. I needed a non-combustible fabric, in the end I decided to do it with fiberglass. It is sold in almost any hardware store and costs 30 rubles. about a meter, but you can wind up on the heating main))) I did it in 2 layers, since one layer seemed to me not enough. Glued at the moment some kind of heat-resistant in a tube, holds up to 100 degrees, it will go for cladding.

In general, we apply glue, then we apply the first layer, then again the glue and the second layer of fiberglass. We are waiting for it to dry, I fixed the edges with the most common stapler.

I could stop at this, but the white color of the fiberglass seemed to me too easily soiled, I decided to paint the whole thing black. We buy for 150 rubles. spray can of heat-resistant paint and go!

We paint, make small holes and you're done. Maybe, of course, not very aesthetically pleasing, for it is cheap and for a long time. Karcher's engine is not mine, so I think the paint will last for a long time.

Also, for the winter, I bought a priorovsky insulation with a reflective surface for almost nothing. You can use penotherm or other similar foil insulation. It was cheaper and easier for me to redo the Priorovsky)

By the way, it is much larger than ours, and the thickness is about 1 cm. I cut out from the prior's according to the size of the standard one, and attached it over the standard one. It turned out to be such a pie, at first a dear one, and on top of a prior's one.

Native caps all broke, and they are too short. I was looking for a replacement for them, the holes in the hood are very small. I tried to remake VAZ, but it did not work, they are too thick. As a result, I picked up such Masuma KJ-634. They are longer than the standard ones and you can use them anyhow, they can be easily removed. But they have a small cap, so you need to use washers.

I hooked the whole thing, the car began to warm up a little faster and cool down more slowly. There is no more ice on the hood, I'm happy with the result. I will take off the Priorovsky heater for the summer, only my own will remain, which I hope will serve for a long time.

You can buy these products in the BudOpt store or order by phone
+38 (098) 609-53-93, +38 (066) 698-97-94, +38 (093) 246-22-24
HOOD INSULATION TECHNOLOGY

1. First you need to cut a pattern for the hood insulation. For this, a roll of wallpaper unclaimed after repair is suitable.
2. Then we fix the wallpaper to the hood with the clips purchased in the auto parts store and make out the pattern of the required size, in parallel noting the protrusions under the ribs.
3. Then, using a pattern, cut off the required piece or two from Izolon. In addition, prepare a piece of Izolon to keep warm in the area of the stiffeners.
4. Glue the cut-out parts of the insulation into one piece.
5. In the resulting insulation, make holes for the clips so that they coincide with the holes in the hood. Fasten the insulation on the hood with clips, cut off the excess with a knife.
how to insulate the hood of a car
Now the insulated hood of your car will make it possible to travel, regardless of the most severe winter, and avoid prolonged and thorough warming up of the engine.
And, of course, ice will not appear on the hood. What we, in general, were striving for.

Video Car hood insulation. Do-it-yourself thermal insulation for the car hood of the channel Internet store BudOpt ™

Winter is the most unfavorable time of the year for car operation. This is primarily due to start-up problems and prolonged warm-up of the motor.

But the dilemma can be easily resolved if certain measures are taken. Below we will consider the most important questions:

How to insulate the hood of a car?
What are the pros and cons of a car blanket, and how to use it correctly?
What materials are used for thermal insulation?
Why and how to close the grille for the winter?

Let's consider each of the questions in detail.

Many car owners are interested in what is the point in hood insulation, because the manufacturer has already provided the necessary protection.

In fact, this is not enough. Additional protection is required to accomplish the following tasks:

Acceleration of engine warm-up and reduction of fuel consumption;
Elimination of the appearance of ice on the surface of the hood, which negatively affects the paintwork of the car.

How to insulate the hood of the car and the engine compartment as a whole? The car owner has the following options at his disposal:

Purchase of a car blanket for the motor.

This method of insulation has been known for several decades. The only thing is that our grandfathers used ordinary blankets.

Today, everything is easier, because there are specialized products on sale that can withstand high temperatures.

The advantages of a car blanket include high efficiency and safety in operation.

In practice, the warm-up time is reduced from 15 to 7-10 minutes, which saves fuel and extends engine life.

In addition, the use of a car blanket allows you to keep warm in the engine compartment longer after a stop.

In the absence of a blanket, the power unit cools down within 40-50 minutes. The use of insulation extends this period to four to six hours.

This feature is a big bonus for car owners who travel frequently.

Insulation of the hood using special materials (this will be discussed below).

Many manufacturers have already provided sound and heat insulation on the inside of the lid.

But to increase efficiency, it should be improved with your own hands, without throwing away the factory protection.

In the process of movement, large volumes of cold air enter the engine compartment, which worsens the process of warming up the engine to the optimum temperature. One way to fix the problem is to close the radiator grill.

This option can hardly be called ideal from the standpoint of aesthetics, but it works.

In addition, it is recommended to provide motor protection to prevent precious heat from escaping through the lower part of the car.

Today, there are several types of engine blankets that differ in material, characteristics and dimensions.

When choosing a product, you should focus on the following parameters:

Car brand (dimensions depend on this);
Width;
Length;
Weight;
The presence of a cutout for the lock;
Operating temperature requirements;
Price.

Let's consider the main options:

This insulation is enough to keep the motor warm. The product is manufactured using the best materials, using modern technology and taking into account the current standards.

Car blankets are resistant to chemical attack, electric current and excessive heat.

The working temperature of A-1 brand products is in the range of -60 ... +650 degrees Celsius. At the same time, the covering material can withstand temperatures up to 650 degrees Celsius, and the blanket filler - up to 1200 C.

This type of product is suitable for thermal insulation of gasoline and diesel engines.

Due to its dielectric qualities, you can not be afraid of accidental shorting of the terminals on the battery.

An important point is the size and presence of special cutouts. That is why the choice of a blanket should be based on the model and brand of the car.

Like the previous model, this is a universal product designed for insulating various types of motors (running on gasoline or diesel).

The use of such a blanket in winter provides a quick warm-up of the engine, an increase in the battery and engine resource, and a decrease in fuel consumption.

Due to its resistance to negative influences (alkalis, acids, high temperatures), the auto blanket can serve for more than one year.

The main difference lies in the ability to work in a wide temperature range - from 60 degrees below zero to 1200 degrees Celsius.

The blanket of this brand is a dielectric, so touching the battery terminals does not lead to a short circuit.

Scope of application - insulation of motors of any equipment where internal combustion engines are installed.

The insulation contains the following materials:

Silica fabric;
Fiberglass threads;
Mullite-silica wool.

Thanks to this composition, effective thermal insulation of the bonnet is provided while maintaining heat in the engine compartment.

Ability to withstand temperatures up to 1200 degrees Celsius;
Long-term preservation of motor heat;
Burning resistance;
Protection of the hood against ice formation.

There are many other modifications of auto blankets for the engine. As a rule, the material from which they are made is the same, the only difference is in size and shape.

The best indicator of the quality of any product is reviews of real car owners. Car blankets are no exception.

Consider what good and bad users have identified during the operation.

“Since the beginning of the application of the car blanket, the car warms up faster, the frost on the hood has disappeared. He also operated the car at temperatures below -35 degrees Celsius, so the use of such a product was 100% justified. I am thinking of additionally insulating the engine compartment at the front and bottom. " Stas, 35 years old.
"I used a car blanket on two cars and noticed that after turning off the ignition, the engine keeps heat longer (on average by 20-30%)." Igor, 46 years old.
“I have been using a car blanket for a month now and am pleasantly amazed at the result. The engine picks up temperature faster, the interior warms up better, and fuel consumption has significantly decreased. All this testifies to excellent thermal insulation. " Nikolay, 28 years old.

Of the advantages, it is also worth highlighting:

High quality material;
Additional noise insulation;
Strength;
High quality tailoring.

In addition to positive reviews, you can also find negative reviews. Here are some of them:

“I think I wasted my money. The engine still takes longer to warm up than I expected, and it cools down a little slower. You could just as well have insulated the hood with paper. " Evgeniy, 45 years old.
“I recently read that the use of such a product can lead to lung cancer. The reason is the ingress of air passing through this material into the interior of the car. So it's worth considering several times whether to buy a blanket or not. " Dmitry, 34 years old.
“After two months of application, I discovered a number of shortcomings - low quality of tailoring, lack of proper efficiency and susceptibility to the negative action of acids (after contact with the surface of such liquids, the material is corroded). In the future, I plan to insulate the engine compartment using more radical methods. " Evgeniy, 44 years old.

Also, the disadvantages include:

High cost;
Small thickness at the joints;
Low efficiency (with improper installation);
Styling problems.

It was noted above that the easiest way to insulate the hood of a car is to use a car blanket.

If you choose the right product, it will ideally fit the dimensions of the engine compartment, and its installation will take a minimum of time.

All that is required is to throw a blanket over the engine and tuck it tightly around the perimeter. The main thing is that after laying there are no gaps left.

In addition to the considered option, for thermal insulation of the engine, you can use:

Izolon... The advantage is effective heat retention and an affordable price. One square meter costs from 50 to 200 rubles (the price directly depends on the thickness). The advantages are reliable heat retention and high quality.
Tiviplen-P - material for thermal insulation, which has a self-adhesive base. The main component is polyethylene foam. In this case, the product itself consists of three layers - glue, polyethylene foam, exterior decoration. Foil is not provided here, but despite this, the product does an excellent job of retaining heat. The thickness of Tiviplen-P is four, eight or fifteen millimeters. Cost - from 220 rubles and more.

If you operate your car during the cold season, be sure to get a heater. This way, by warming up the engine, you will save money and your time. Hood insulation is used for the following reasons:

excessive fuel consumption during heating, which is caused by engine freezing;

formation of a layer of ice on the body, which contributes to the destruction of the paintwork and scratches the glass.

If you do not use hood insulation, you run the risk of constantly polishing the body due to scratches and tarnishing of the paint there. You will have to devote more time and money to travel by personal car.Heat insulation of the hood is made from available tools or by purchasing a car blanket. Image - DIY hood insulation repair

Many people do not notice how hard it is to start a cold engine.

Before you start insulating the hood, get the following materials and tools:

insulation;
specialized clips. They are sold at an auto parts store.

You can save on insulation under the hood by purchasing the following material:

felt. It is cheap and, despite being unpresentable, wears out for a long time;
expanded polypropylene. Covered with foil for better effect. Sold in every building goods store. Sold under the Izolon brand. This insulation under the hood can withstand up to +150 degrees.

The easiest way to insulate the hood of a car is to purchase a special blanket for the engine.

Insulation of the hood presupposes the presence of a heat-saving material with a layer of 2 cm. You will need no more than two layers of Izolon. After selecting a consumable base to save heat, secure it with clips.

The main way to keep the car warm is a car blanket. It came to replace the felt coverings and even the clothes that our fathers and grandfathers used to cover the vehicle with.

This product can withstand heating to high (over 100 degrees) temperatures. Compared to other materials, the auto blanket has the following advantages:

reduces the engine warm-up period. If it is required to heat the engine up to 15 minutes with felt, the car blanket reduces this time to 5 minutes, which saves gasoline;
with short stops, the engine cools down longer. An uncovered car with a stopped engine cools down to 1 hour, and with a blanket this figure rises to 5 hours;
initially sold for different vehicle sizes.

Another equally effective way to insulate the hood is to install insulation on the hood lid.

Insulation for the engine and car body from available tools is installed as follows:

cut out a pattern from cardboard or a piece of wallpaper;
use special autoclips to secure the pattern to the hood and give it the final shape. Be sure to mark the ridges for the ribs - there you can install two layers of material;
attach the pattern to felt or other insulation material and cut out a blank for the hood insulation;
connect the components of the future hood insulation;
mark and cut out the clip holes in the felt so that they line up with similar holes on the body;
fasten the felt blank using clips, cut off the excess.

Often, in parallel with the insulation under the hood, motorists put noise insulation in the car. If you use felt as insulation under the hood, it is convenient to lay noise-insulating materials under it. That being said, don't throw away the factory-made noise prevention materials - they help as thermal insulation as well.

There are several popular do-it-yourself car door soundproofing products, which are used in conjunction with a felt heat insulator:

"Vibroplast". Contains aluminum foil and is glued to the surface. Has the qualities of a sealant, does not react with chemicals, resists water, protects the internal surfaces of the machine from corrosion. Installed without preheating. Presented in squares for ease of measurement.
BiMast. Made on the basis of bitumen and rubber, covered with foil, reliably protects against vibration. Requires heating up to 50 degrees before installation and is well suited for audio preparation of speakers.

Posted by admin in Tips for car enthusiasts 17.09.2018 0 362 ViewsIf you use your car in winter, then you just need to insulate the hood. Thus, you can save not only time, but also money during the warm-up of the engine.First, let's define the reasons for the auxiliary hood insulation.

in a frosty period, it is necessary to spend a long time to warm up the engine, which is associated with excessive fuel consumption;

During winter, a layer of ice forms on the bonnet, which adversely affects the paintwork.

Today, when there is a total deficit in everything everywhere, not every car enthusiast wants to wait for the engine to warm up completely. In addition, to preserve the presentability of the car, not everyone will perform an expensive polishing of the body.All of the above provides a convincing basis for urgent hood insulation.Before you start insulating the hood, you need to visit the store, where you need to find all the auxiliary tools and material.The most common material that you can use to insulate the hood is felt. Despite the fact that its appearance is far from ideal, it is inexpensive and does not wear out quickly.And, nevertheless, even in spite of its low cost, it is very difficult to buy it in our time. Image - DIY hood insulation repair

Therefore, it is better to stop at polypropylene foam, which is covered with foil. You can purchase it at any hardware store.

This material is sold almost everywhere under the Izolon trademark and costs about $ 1.5 per sq.m. It differs in that it does not deform even when heated to 150.0 degrees Celsius.

It is this characteristic that makes it suitable for your heat preservation task.

To insulate the hood of a passenger car, it is necessary to form a layer of insulation with a thickness of about 2 centimeters. To do this, you will spend no more than two layers of Izolon.

After the material is selected, it is necessary to strengthen it in a specific place. You don't need to be a great technologist to realize that in most cars, fastening can be done using specialized clips.

These can be purchased at any auto parts store.

1. First you need to cut a pattern for the hood insulation. For this, a roll of wallpaper unclaimed after repair is suitable.

2. Then we fix the wallpaper to the hood with the clips purchased in the auto parts store and make out the pattern of the required size, in parallel noting the protrusions under the ribs.

3. Then, using a pattern, cut off the required piece or two from Izolon. In addition, prepare a piece of Izolon to keep warm in the area of the stiffeners.

4. Glue the cut-out parts of the insulation into one piece.

5. In the resulting insulation, make holes for the clips so that they coincide with the holes in the hood. Fasten the insulation on the hood with clips, cut off the excess with a knife.

Now the insulated hood of your car will make it possible to travel, regardless of the most severe winter, and avoid prolonged and thorough warming up of the engine.

And, of course, ice will not appear on the hood. What we, in general, were striving for.

Having done these simple warming manipulations, you will provide yourself and your car with additional advantages when operating in the winter. Article: how to insulate an engine with your own hands.

Posted by: admin in Tips for car enthusiasts 07.10.2018 0 3 Views

If you use your car in winter, then you just need to insulate the hood. Thus, you can save not only time, but also money during the warm-up of the engine.

First, let's define the reasons for the auxiliary hood insulation.

in a frosty period, it is necessary to spend a long time to warm up the engine, which is associated with excessive fuel consumption;
During winter, a layer of ice forms on the bonnet, which adversely affects the paintwork.

All of the above provides a convincing basis for urgent hood insulation.

Before you start insulating the hood, you need to visit the store, where you need to find all the auxiliary tools and material.

The most common material that you can use to insulate the hood is felt. Despite the fact that its appearance is far from ideal, it is inexpensive and does not wear out quickly.

And, nevertheless, even in spite of its low cost, it is very difficult to buy it in our time.