DIY iron repair tefal with a steam generator easy pressing

In detail: do-it-yourself repair of the Tephal iron with a steam generator easy pressing from a real master for the site my.housecope.com.

Household appliances tend to fail at the most inopportune moment, and this always happens unexpectedly for the user. As soon as you are about to iron the washed laundry, the steam station does not turn on, and urgent repair of the steam generator is required. Let's try to find the source of the problem.

A steam generator from any manufacturer: Tefal, Bosch or Philips, consists of three main parts: an electronic control unit, a stand, it is a station, and an iron. The delivery set also contains special attachments. The boiler heats up the water, steam is generated, which is fed through a special hose to the iron, at the base of which there is a perforation. Coming out of the holes, steam processes the material, smoothing out any creases.

The density and size of clothes do not affect the quality of their processing: you can simultaneously process bed linen, fabrics that require delicate handling - for example, silk, as well as jeans, suits made of wool blend or synthetics.

A domestic steam generator station such as Tefal has a number of differences from the iron with steaming from the same manufacturer:

firstly, the size - it is much more voluminous and takes up a lot of space;
secondly, water is poured into a separate container of the boiler and heats up there until steam is formed;
thirdly, the steam is not wet, but dry with a temperature of about 160 degrees;
the processing of clothes and linen is carried out without touching it with a device in the form of an iron, but only with steam, so you can not be afraid for the integrity of things.

The figure below shows a typical Tefal steam generator station.

Video (click to play).

During operation, household appliances sometimes have various malfunctions that can be diagnosed by their characteristic features and repair the steam generators with their own hands. If steam generators refuse to fulfill their assigned duties, the reason may be different.

Station does not supply steam - burned out heating element or its contacts. There may also be an incorrect operation of the boiler switch, or the steam supply button on the device is simply broken.
The pressure is not regulated - the switch is broken.
Steam is dispensing wrong temperature - the temperature fuse is blown, the thermostat is out of order.
Lack of voltage - one of the wires in the power cord is interrupted.
Poor water heating - a lot of deposits have accumulated on the walls of the container.
The water level indicator is constantly on - the sensor is broken.

Steam is constantly discharged through the safety valve - there may be little water in the tank.

Under the station water appeared - somewhere there is a leak, turn off the steam generator and localize the malfunction.

In addition to the listed failures, there are many more reasons that provoke the appearance of malfunctions in the operation of the steam generator.

To make a complete diagnosis of the product and fix various failures with your own hands, you need to have special equipment, only simple malfunctions can be found and eliminated with one multimeter and a soldering iron.

You can repair simple faults yourself, even if you have a Tefal steam generator, because we have already written that the design of all models is the same, with the exception of certain nuances. Below is a short list of common failures and how to fix them.

The steam stopped flowing - check the heating element, fuse, solenoid valve, clean the steam pipe. Descale the boiler container, replace the thermostat or the hose that supplies steam to the iron.
Incorrect operation of the pressure switch - check with a multimeter. If a breakdown occurs, then install a working toggle switch or microswitch.
No response to pressing a button on the control panel - check wiring integrity, if everything is fine, then replace it.
The indicator of low water level in the tank is constantly on - check the level, if it is normal, then replace the sensor for the volume of liquid in the tank.

The station informs about readiness for work, but when you press the steam supply button, it does not go - the button is faulty, you need to replace it.

Image - DIY iron repair tefal with a steam generator easy pressing

Weak steam pressure from the perforations on the soleplate of the iron - check regulator, if it breaks down, replace it with a new one.

Of course, it is impossible to predict all the cases that may occur during operation - this list can be continued indefinitely, but here are presented only those faults that the user can fix on his own.

It should be borne in mind that the home craftsman has skills in working with electrical household appliances - otherwise you should not even try to disassemble or try to repair steam generators on your own, for example, from such well-known manufacturers of very reliable and high-quality equipment as Tefal or Philips.

Some breakdowns of household appliances with minimal skills and tools can be easily eliminated; this does not require contacting a service center. It is quite possible to repair the Tefal iron with your own hands, the main thing is to properly disassemble the device and determine the cause of the malfunction.

Ironing equipment from a French manufacturer is divided into steam devices and with a steam generator. The first ones have a classic design of an electric iron; in addition, there is a water tank with a volume of up to 300 ml inside. The liquid, poured into a special container, is heated and through the holes in the sole is supplied to the fabric in the form of steam.

The design of devices with a steam generator is somewhat different. The water tank is located at the station in the boiler. The iron and the station are connected by a water supply pipe, a power supply wire. The water in the boiler turns into steam and is continuously supplied through pipes under pressure to the soleplate of the iron. Steam jets emit from the holes in the sole and the fabric is smoothed out.

The reasons for the failure of the device can be:

physical - poor contact of the cord, heating element and so on;
chemical - scale from hard water on the heating element;
mechanical - sinking buttons.

To remedy any of these problems, you will first need to disassemble your Tefal iron.

For work you need screwdrivers: flat and an asterisk.

Important! Disconnect the appliance from the mains before starting. Some models (FV 9347, 5375, 9240, 4680, 3530 and 3830) have an anti-lime rod installed and must be removed.

Parsing begins by unscrewing two bolts on the back wall. Use a star screwdriver for this. The third bolt is located under the steam supply button, you need to carefully remove it: pry it with a flat screwdriver, bend the plastic latches, pull it towards you. You should act very carefully so as not to break anything. Likewise, remove the button to spray water.

Unscrew the bolt located under the buttons of the steam supply system, after which the handle of the device can be dismantled. Carefully remove the soleplate heating temperature regulator. Take out power cord connector... 2 more screws are hidden under it and 4 contacts are visible.

Go to the analysis of the case. The housing consists of two securely sealed parts, which should not be attempted to be disassembled. The sealant is visible to the naked eye, it is a black mass, similar to a rubber band.

Important! The soles of Tefal irons are attached to the inner elements using special methods that differ from those used by other manufacturers.These can be hard-to-find screws (usually located under the plugs) or special latches. Make sure all fasteners have been removed before starting to separate the sole from the chassis.

In order not to finally break the device, before work it is worth watching a video about the parsing and repair of the Tefal iron.

Some Tefal irons, such as the Ultragliss FV4650 or Supergliss FV 3535, are equipped with Easycord system, a distinctive feature of which is the special design of the rear panel of the device. The bolts are on a stand connected to the handle. Having unscrewed them, remove the cover that covers the place where the cord is installed, and then proceed to disassemble the steam supply system. The buttons are located on a removable block, which can be dismantled by unbending special latches.

After that, you can remove the handle by gently pulling it up. The next step is to remove the screws. 2 of them are located on the back of the iron, and one more is located on the front, under the removable block. Next, the iron is disassembled in the same way as standard models.

The repair procedure depends on the type of fault. The most common ones are worth considering. Some of them can be dealt with independently; the solution of especially difficult problems should be entrusted to specialists. For work, you will need a tester, screwdrivers, electrical tape, in some cases - spare parts if you need to replace defective elements.

Most often, the iron does not turn on due to the frayed cord... It has a heavy load during the operation of the device, and over time it is damaged. To make sure that the cause of the failure is in the cord, you need to check it with a tester. To do this, after removing the back panel of the iron, the tester traverses the entire length of the wire, reveals the area of the gap.

Further 2 options are possible.

Repair the cord: insulate the wires, change the plug, remove twists.
Completely replace, choosing an analogue that is suitable for technical parameters.

The holes in the bottom of the appliance may be blocked due to limescale accumulations, limescale or burnt-on tissue particles. For cleaning, use a piece of soft cloth dipped in vinegar or citric acid solution. They wipe problem areas until the deposits are completely dissolved. When processing, it is important to avoid contact of a damp cloth with other elements of the iron.

Do not clean the sole with sharp objects: scratches will appear on it, due to which the working surface will not slide well on the fabric. At sinking the feed button steam on the Tefal iron, clean the part and its location from dust, inspect the latches, and then put it back. If the spray arm becomes clogged, it must be cleaned. To do this, use a needle.

The heating temperature of the sole depends on this element and the possibility of setting the desired ironing mode. The most common cause of a thermostat malfunction is clogged contacts... Small fluff clogs in the gaps. After disassembling the device, you should clean the contacts with sandpaper, a needle or a sharp object. After checking - turn the bush on which the switch handle is located. If everything is in order, you will hear a click.

The fuse can be single or reusable. The first ones stop working when they burn out, and it is impossible to fix them, you should completely replace the part.

The fuse will need to ring with a tester. If the indicator on the instrument does not light up, the instrument must be disassembled and the wire contacts checked. Then the gap is closed or the element is completely replaced if it cannot be repaired.

The reason the iron turns on but the soleplate does not heat up is heater breakdown... In most modern models of irons, the heating element is connected to a water tank, and it will not work to dismantle it to replace it with a new one. You will either have to completely replace the sole or buy a new device.The first option is impractical - it is difficult to find a suitable work surface, and its acquisition will not be cheap.

In order for the iron to work properly for a long time and not have to be repaired, you should adhere to simple recommendations.

If the device has a self-cleaning function, you must use it at least once a month.
It is important to monitor the condition of the soleplate of the iron: remove plaque and carbon deposits from it in a timely manner. To do this, use a solution of vinegar or citric acid, special pencils for cleaning. In no case should solutions be poured into the tank - they can spoil small parts, gaskets, which will result in depressurization of the tank.
Costs use only soft water: filtered, boiled, thawed, distilled or special designed for irons. This will help prevent lime scale build-up.
Avoid kinking the cord. After finishing ironing and cooling the device, the wire is carefully wound around the body.

If there are serious breakdowns that cannot be eliminated on your own, you should contact the Tefal service centers located in Moscow and other large cities of Russia. More information can be found on the manufacturer's official website. There is also an opportunity to order the spare parts necessary for repair.

To begin with, you must visually inspect the case for cracks, defects and traces of melting of the case. Perhaps the appearance will immediately show what exactly is the cause of the iron breakdown. If the inspection did not give anything, you need to completely disassemble the case for self-diagnosis of all the constituent elements.
Image - DIY iron repair tefal with a steam generator easy pressing

We draw your attention to the fact that it is sometimes quite difficult to disassemble the iron. This is due to the fact that manufacturers every year devote more time to the design of the electrical appliance, creating invisible latches and screw holes. Initially, prepare a set of screwdrivers and a knife that will be useful to you for further actions.

One of the main malfunctions of the iron is precisely the power cord, which you, in fact, plug into the outlet.

Get to the point where the contacts are connected to the heating element and if there are no visible faults, use a tester to ring the cord to determine its operability.

For continuity, you can use a homemade control consisting of a piece of wire, a battery and a light bulb. If the light is on when you connect the contacts to both ends of the cord, go ahead.

If the power cord is the cause of a breakdown, you can try to shorten it by 10-15 cm (the problem area may be removed). Iron doesn't work anyway? We replace the cord with a new one!

The second in line is the thermostat. We also check it using a dial tone, which we attach to the contact group.

When the temperature control is rotated towards the closed circuit, the electrical circuit should function. Is the light off? We clean the contacts with sandpaper and check again. Immediately we recommend watching the video repair instructions:

Is the thermostat working, but the iron does not heat up? Let's start checking the thermal fuse!

More often than a power cord, this element of the circuit fails. Its main purpose is to disconnect the electrical circuit if the temperature of the heating element exceeds the nominal value.

Using the dial tone, we determine the performance of the fuse. If the reason for the breakdown of the iron is in it, we replace it with a new one, or even remove it from the circuit altogether. During normal operation of the temperature controller, there is no need for a fuse.

Well, the last of the reasons why the iron does not work is the failure of the heating element. If the equipment turns on, the light is on, but the sole does not heat up to the required temperature, most likely this is the case. As in previous cases, using a homemade tester, we determine the performance of the product.The heating element is fixed to the sole and if the attachment point is one-piece, then most likely you will have to say goodbye to the purchase (if the reason is in it).

In the event that the heating element is connected to the sole with the help of tips, you can try to repair the iron with your own hands by cleaning the contacts with sandpaper. Still not heating up? We send the equipment for recycling, because a new part costs almost the full cost of the device!

We draw your attention to the fact that if you throw the equipment into the trash, it will be more correct to disconnect the power cord and keep it for yourself. Perhaps this element will be useful to you in subsequent repairs, especially since it will not take up much space in the closet!

If the malfunction is that the iron steamer does not work, then, most likely, it is necessary to clean the internal vaporization cavities. To do this, we recommend that you use a solution of water and vinegar in a ratio of 1 liter to 1 glass. We install the sole in the container (as shown in the picture), bring the water on the stove to a boil, turn it off and wait until it cools down. After that, we repeat the event 3 more times, which is quite enough for high-quality cleaning of the spray bottle.

In stores, you can see special descaling agents, but we highly do not recommend using them. This is due to the high cost of funds and at the same time low efficiency, in comparison with the folk method! It should also be noted that there are many negative reviews on thematic forums that the iron does not work after cleaning with salt. This is due to the fact that salt crystals clog the holes for the steam supply, as a result of which you have to thoroughly clean the sole.

Another reason why the sprinkler does not work is that the steam button has broken. It can also be called with a tester and replaced if necessary.

That's all the instructions for repairing an iron with your own hands. As you can see, the event is quite simple and even a novice electrician can do it! Finally, I would like to note that if the red indicator on the case flashes, do not panic, because this may indicate a certain operating mode or automatic shutdown after heating. Read the instructions that came with the package to understand the reason for the blinking. We hope that now it became clear to you what to do if the soleplate does not heat up and how to repair the breakage at home!

Related materials:

Sometimes situations arise when, at the most inopportune moment, household appliances refuse to function. If you want to re-iron the washed laundry and the steam system does not turn on, the steam generator needs urgent repair. In this article we will try to find the source of the problem and consider how to repair the steam generator with our own hands.

Consider the main advantages of operating an iron with a steam generator:

the ability to iron clothes directly on the hanger;
smooths any material without problems;
the presence of a self-cleaning function;
the ability to clean the upholstery.

Like any household appliances, irons with a steam generator sometimes fail and require do-it-yourself repairs. In order to carry out such a repair, you should first familiarize yourself with the features of such a household appliance.

Consider the main elements of an iron with a steam generator:

a heating element;
sole;
temperature regulator;
thermostat;
steam regulator;
indicator.

back to content ↑

Regardless of which manufacturer produces a steam generator, for example, Bosch, Philips or Tefal, all devices are characterized by three main parts:

electronic control unit;
stand or so-called base;
iron.

The household appliance is also equipped with special attachments.

Let's consider the principle of operation of the steam generator:

The boiler heats up the water.
The result is steam.
The generated steam is fed to the iron through a special hose device.
There are perforations at the base of the iron.
Steam escaping from the holes treats the fabric, while smoothing out any kind of crease.

Important! The steaming quality is not affected by either the size of the garment or its density. So, the steam generator has the ability to simultaneously process bed linen, jeans, suits made of semi-woolen fabrics, various synthetic products, as well as materials that require very delicate handling, for example, silk clothes.

The household steam generator station of the Tefal manufacturer differs significantly from the household appliances with steaming of the exact same manufacturer:

a significant difference is the size - the household station is much larger and more voluminous, while taking up a lot of space in the room;
in the steam generator, water is supplied to a separate compartment of the boiler, in which it is heated to the formation of steam;
the generated steam is not wet - it is dry with an approximate temperature of about 160 degrees;
clothes and linen are processed without the device in the form of an iron in contact with them, therefore, when processing with steam, there is no damage to the clothes and you should not worry about the integrity of things.

When using household appliances, situations sometimes arise in which various malfunctions appear. Some of them can be diagnosed by characteristic signs - this knowledge allows you to perform repair work on the steam generator with your own hands.

How to repair a steam generator with your own hands? It all depends on the underlying cause. If the steam generators refuse to function correctly and do not cope with the responsibilities assigned to them, then in this case there are a number of reasons that cause damage:

The station stopped supplying steam - the heating element or its contacts burned out. In addition, sometimes there is an incorrect functioning of the boiler switch. It also happens that the steam button on the appliance is simply broken.
If the pressure stops regulating, then the switch is simply broken.
The device supplies steam, which is characterized by the wrong temperature - the temperature fuse has blown, the thermostat has ceased to function.
Loss of voltage - it is necessary to check the power cord, perhaps one of the cores is broken.
Insufficient heating of water - you need to check the container, maybe many different deposits have accumulated on its walls.
If the water level indicator does not turn off, but is constantly on, then a broken sensor may be the cause.
There is a constant discharge of steam through the safety valve - maybe there is not enough water in the tank.
Water has formed under the steam generator station - somehow a leak occurs, therefore, to localize the malfunction, turn off the device.

Important! In order to fully diagnose the device and make repairs on your own, it is necessary to have special equipment, since the presence of one soldering iron and a multimeter allows you to solve only simple problems and eliminate minor damage.

If you have a Tefal steam generator model, then you can make repairs yourself, while eliminating simple malfunctions. All models have the same design, differences exist only in some nuances.

Consider the most common malfunctions and ways to repair the steam generator yourself:

The station reports that it is ready for operation, but when you press the button, there is no steam supply - the button must be replaced.
Steam is not supplied to the steam generator - in this case, it is necessary to check the performance of the heating element, fuse, solenoid valve, and clean the steam outlet pipe. In case of damage, it is required to descale the boiler tank, replace the thermostat or the hose that serves to supply steam to the iron.
The pressure switch is characterized by incorrect operation - using a multimeter, you need to check the serviceability of the part. In the event of a breakdown, it is required to replace and install a serviceable microswitch or toggle switch.
There is no reaction on the control panel to pressing the button - the integrity of the wiring is checked, if the problem is not found, then the wiring should be replaced.
There is a constant glow of the low water level indicator in the tank - it is necessary to check the water level in the tank, if it is correct, then the reason is in the liquid volume sensor, it needs to be replaced.
There is a weak steam pressure on the sole of the iron from the perforations - to solve this problem, it is recommended to check the regulator, in case of a malfunction, replace it with a new one.

It is impossible to foresee all cases that may arise during the operation of the device and provoke malfunctions. This list can be supplemented with new problem situations.

Important! In this list, only such breakdowns are considered that the consumer is able to eliminate them on his own. At the same time, the home craftsman must have publicly available skills for working with household electrical appliances.

Very often there are situations in which equipment malfunctions come from various mechanical damage, in the event of errors in the operation of the device and wear of some parts. In this case, characteristic causes of malfunctions are observed:

the cord breaks;
sprinkler blockage occurs;
water flows out of the filler hole of the steam generator;
the thermostat is out of order, as a result of which the iron overheats.

Important! It is unacceptable to immerse the steam generator in water, it is also strictly forbidden to wrap the cord around a hot device, only when the device is turned off can water be poured into the tank compartment.