In detail: do-it-yourself bathroom repair plastic panels from a real master for the site my.housecope.com.
PVC panels are a fairly durable, reliable and practical material. They are perfect for working in any environment. A variety of sizes and textures allows you to decorate the interior in an original way, make it modern and stylish. In addition, there will be no big difficulties with the installation of finishes, they are well suited to any novice master.
The modern PVC planks market makes it possible to find suitable models even for the most fastidious buyers. However, for beginners, as a rule, it can be quite difficult to decide. To avoid mistakes, carefully study the characteristics and types of planks. Only products with a quality certificate should be considered, since cheap options do not differ in the required strength and very quickly lose their color.
PVC planks have several of the following advantages:
increased resistance to moisture;
ease of installation;
fire safety;
hygiene;
long service life;
resistance to harmful microorganisms.
The strength of plastic panels depends on their thickness and the amount of ribs
A serious drawback of this material is its instability to shock, which is why the panels must be transported with extreme caution. According to the coating applied at the factory, the planks can be glossy or matte. According to the technology used in the manufacture of patterning, products can be printed or film. There are materials on the market that have certain standard sizes. The thickness of such strips can be 8–10 mm, length - 27–30 cm, and width - 2–3.5 cm.
Video (click to play).
The strength of a material is mainly influenced by its thickness, as well as the amount of ribs that are placed inside it. Press down on the surface with your finger to make sure the product can withstand the stress. If the bar began to bend from this, it means that it will not be able to serve for a long time. Do not buy plastic bathroom wall panels if you find a break or deformation in their stiffeners. Also, there is no need to purchase material with a fuzzy pattern on the surface. Do not take the products if you find that the coating in different places of the plank has a slightly different shade. The same applies to products with face scratches and mismatched slabs.
In order not to overpay or run several times to the store, calculate the amount of material you need. The bars can be attached in several positions. To mount the vertical type, you need to measure the length of the perimeter of the room, subtract the width of all openings from the total amount, and divide it by the width of one of the panels. Be sure to add 3-4 more spare parts to the final result.
Before buying material, you need to calculate the required amount
If the cladding in the bathroom is performed by horizontal fastening, then it is necessary to measure the area of the room, subtract the areas of door and window openings, and divide the result by the area of one plank. In reserve, you will need to buy at least 10% of the material, since a lot of it will go away when trimming. To decorate the walls with plastic, you will need to make calculations of the number of rails and fasteners for making the lathing. To do this, the height of the walls is divided by the lathing step - usually it is no more than half a meter. The resulting number must be multiplied by the perimeter of the room.After measuring the height of the corners and multiplying the result by their number, you get the required footage of the corner profiles.
Decorating a bathroom with plastic panels is done in several popular ways: with glue, long screws and special clamps. The first method is suitable only if the surface of the walls in the room is perfectly flat and smooth. For work, use a special adhesive, a universal product Instant installation or ordinary liquid nails.
The use of glue will significantly reduce the cost of installation, since you do not need to make and fasten the crate. In addition, this method of finishing with plastic panels is suitable even for a beginner. However, it has several drawbacks - you cannot replace the damaged element, and it will be rather difficult to dismantle the products during further repairs.
VIDEO Mounting with self-tapping screws has proven to be a very convenient and reliable method. It does not imply the presence of perfectly flat walls. For repair procedures, you will need a screwdriver, because without it, the installation can take a very long period. Among the shortcomings, the need to make a durable wooden frame stands out. Therefore, you will have to spend money on the purchase and installation of a bar around the perimeter of the room.
The third option is considered the most optimal. Cleamers allow you to quickly and reliably fix the panels to the surface of the crate and hold the planks on the surface for a long time. A metal profile is taken as a material for the manufacture of the retaining structure. If necessary, you can quickly replace a broken or scratched panel. Dismantling the finish during repair will also not take much time.
Before covering the bathroom with plastic panels, prepare everything you need to work. You will need:
tape measure and pencil;
square and level;
plastic profile or slats;
screwdriver and hammer drill;
antiseptic lubricant;
ceiling plinth and sealant.
First of all, the walls are cleaned of the old coating.
To begin with, be sure to clean the walls of the old coating. Fill even the smallest gaps, level the surfaces if possible and be sure to treat them with an antifungal primer. It will prevent mold, which often occurs in damp rooms.
Fasten the holding structure strictly level. In order not to measure each batten, make markings on the surface of the wall. In this case, the bottom row of the lathing should be located 2 cm above the floor. Draw a point with a pencil at this height and use a level to draw a horizontal line along it. Do the same at the top of the wall. The top line should be located 2 cm from the ceiling. After that, measure up 40 cm from the bottom line, install a beacon in this place and place the rest of the beacons to the very top. Draw parallel lines through them along the entire perimeter of the wall.
Fasten the planks strictly in a perpendicular position to the crate. The horizontal frame must be sheathed vertically, and vice versa.
If you use a wooden crate for repairs in the bathroom, then before installing it, treat all the wooden slats with an antiseptic. Drill holes along the marking lines in 50 cm increments, then apply the slats and align them horizontally. At the end, the slats are attached with dowels. If there is wiring on the wall, then it must be secured with clamps so that it does not protrude beyond the slats.
Install the very first plank in the corner farthest from the entrance. This place is considered to be the most visible. If necessary, cut the panel to length with a hacksaw. It is inserted into the side molding with one edge, applied to the corner and attached to the sheathing with the back side. Insert the second part into the fastening groove of the first, press firmly and fix it on the frame rails.To make the joints as tight as possible, lubricate their side edges with silicone before installing the strips. Mount all products in the same way.
VIDEO
We cut holes in the strips for sockets and switches, and after installation, these areas must be closed with plastic boxes. The last panel most often needs to be cut to fit. First, try it on to the wall, draw a line with a pencil and cut off any excess with a hacksaw. At the end of finishing with PVC panels, you will need to install moldings. They will help to make the surface even and hide the gaps in the seams between the panels. The moldings can be sold together or separately from the trim material. Their simple design allows you to insert the edges of the two panels into the grooves, which makes the room much more attractive and neat.
At the end, install a decorative molding around the entire perimeter of the ceiling with your own hands, and attach a plastic baseboard around the perimeter of the floor. This completes the work in the bathroom. If used carefully, the walls will retain their attractive appearance for a long time.
If you decide to carry out a long-planned repair of a toilet or bathroom, then you, of course, know that the work of professionals will be quite expensive. Therefore, many make a choice in favor of do-it-yourself repairs. Having a great desire and financial capabilities, you can choose the option with plastic panels. In addition, the installation of PVC panels in the bathroom is within the power of a person who has never encountered repair work. Especially if you know how to fix the panels in the bathroom with your own hands step by step and what is needed for this.
Experts recommend starting repairs with surface preparation, where the frame or plastic materials will be attached. This primarily applies to old plaster, which can slightly expand the space between the wall and the panel. In addition, with the frameless method of fastening, the walls will need to be treated with plaster in order to exclude possible irregularities, and if the presence of small depressions is not prohibited, then large bulges are unacceptable.
With any method of fastening with your own hands, the walls must be treated with special solutions with antifungal effect.
The better the walls of the room are processed, the less likely it is that fungus or mold will form on them. Therefore, it is not worth saving on them, it is better if you go to a hardware store to purchase them.
If the bathroom has not been renovated for a long time, then just now it is necessary to start replacing the metal communication pipes. If your repair involves replacing or installing sockets in the bathroom, then before fixing the material, take care of supplying electricity to them.
Plastic panels can be installed by hand using two mounting methods:
To make it easier to navigate which method of fastening to give preference, here are a few differences between the two methods of fastening:
the metal frame takes up a lot of useful space, which is so critical for placing a toilet or bathroom;
the metal frame consists of separate profiles, so the installed plastic has voids under it that are easy to push;
in the case of the frame fastening method, there will be a void between the wall and the plastic in which various microorganisms will develop;
to make a frame for plastic panels, you will need to purchase metal profiles and various fasteners, while for a frameless method, you will only need glue liquid nails.
For cladding with a frame method, you will need:
cladding panels for the bathroom;
guide rails for lathing;
finishing profiles made of plastic;
plastic corners;
ceiling and floor plinth for the bathroom;
hacksaw;
self-tapping screws;
dowels;
puncher;
Phillips screwdriver or screwdriver.
For cladding in a frameless way, you need to prepare:
If you decide to do the cladding of a toilet or bathroom with your own hands, using a frameless method of fastening, in addition to preparing glue, liquid nails, you need to carry out some preparatory work. The most important point when performing these works is the preparation of the foundation.
In this case, we are not talking about a perfectly flat wall surface, differences of up to 3 mm are allowed. There should be no hills at all, and shallow depressions are allowed. To correct visible defects of the wall, plaster or putty it.
The next, important point, in the frameless method of fastening, is to work with the corners of the room. Most city apartments have slightly rounded corners, in the case of plastic, such corners will create additional difficulties when installing panels. To correct these shortcomings, you can use a punch and make the corners expressive.
It remains to prime the surface of the walls and you can start fixing the panels. For these works, you will need to stock up on liquid nails glue. Having calculated the area of the toilet and bathroom, calculate how much glue liquid nails you will need if its consumption, on average, is 1 cylinder per 5 square meters.
Having prepared the panel of the desired size, you need to apply liquid nails to it pointwise, placing the glue sections in a checkerboard pattern. Close to the edges, liquid nails are not applied, since, by attaching the panel to the wall, excess glue will come out, smearing the front side of the coating.
With the smeared side, the panel is applied to the wall, and pressed with a palm over the entire area. Then the material is torn off the wall and the liquid nails are allowed to dry for about 5-7 minutes. After 5-7 minutes, the strip is returned to the wall and pressed over the entire surface. This laying technology is not an invention of builders, but the specifics of working with glue liquid nails. If you ignore this technology, then the installed panels can easily move and the installation process will be disrupted.
Particular attention in this work is paid to the fastening of the first panel. To do this correctly, you need to use the level. And in order to avoid shifts of the strip in the process of laying the remaining strips, dowels or self-tapping screws are hammered at the bottom and top. In the finished version, their places of installation will not be visible, since they are usually covered with ceiling and floor skirting boards.
Don't forget about starter strips and corner joints. It is recommended to install them in the places where they are really needed. If the room of the toilet or bathroom will be equipped with a floor plinth, then you should not remember the starting profile.
The plinth well strengthens the fastening of the panel at the bottom, and the frame - of the ceiling at the top, therefore, it is not recommended to start repairs with cladding elements from the ceiling.
You can also mount plastic panels with your own hands in a frame way. The work begins with the installation of horizontal plastic guide rails, along the entire perimeter of the wall. To do this, you need to mark the walls to install metal profiles. Using a punch, drill holes in places on the marking, drive in dowels there and, attaching the guides to the wall, attach them using self-tapping screws.
At the same time, it is not recommended to use wooden panels, since it will not be possible to achieve perfect joints, which will lead to the destruction of the wooden frame due to constant humidity. The frequency of the horizontal battens depends on how strong you want the cladding, but in general it is customary to use the following distances:
when facing the ceiling - 30-40 cm;
when facing walls - 40-50 cm.
In this case, the distance of the first and last slats from the floor surface should be about 5-7 cm. And the end parts of the profiles should exactly fit into the corners of the room. The slats of the future frame must be fixed perpendicular to the panels to be installed.In most cases, the panels are placed vertically, which means that the slats should be perpendicular to them and parallel to the floor. The vertical arrangement of the panels not only visually increases the height of the ceilings, but also better removes the accumulated moisture, since water drops will flow down, and with horizontally installed panels, water will linger on them.
After completing the frame, you can start attaching the panels, but how to do it correctly? The panels must be mounted on the frame using self-tapping screws, which can be easily screwed into them. In this case, you need to start from the corner farthest from the front door. To avoid moisture penetration between the panels, it is recommended to seal their joints with a sealant.
In order for the panels to fit beautifully in the corners of the room, it is necessary to use such a device as an external and internal profile, which in appearance resembles the English letter L. At the junction with the floor, you can use a plinth, then an additional profile is not required.
Having installed the side profile, one panel is inserted into it, and it is fixed to the frame rail. The rest of the panels are inserted into the gaps of the previous one, very tightly. If you have provided an outlet on the wall of the toilet or bathroom, then you need to cut a suitable hole on the panel to be installed and install it against the wall.
To give the room a more complete look, after installing the panels, attach the floor and ceiling skirting boards, in addition to the aesthetic function, they will also perform a practical one, hiding minor flaws.
To work quickly, you should heed the advice of experts:
if the room of the toilet or bathroom is small, then repair with lining is recommended to be carried out in light colors in order to visually increase its area;
If you want your toilet or bathroom renovation to look spectacular and unique, use panels of various sizes or colors for cladding. As a design, you can take panels with pictures, but here the main thing is to harmoniously dock them;
before you start cladding the room with your own hands, bring the purchased panels into the bathroom and leave them there for about an hour to avoid deformation;
you need to fasten the material from the farthest corner from the front door, in this case you can perform the most prominent places without errors and flaws;
before making repairs with your own hands, look at all problem areas where pipes or plumbing are located, this will help to quickly install the frame and plastic panels. For the frame, we usually make markings, observing the horizontal and vertical lines along which you will fasten the crate;
to mask water and drain pipes in the toilet, it is recommended to make a blende panel, which will only improve the interior design.
DIY bathroom renovation is the hardest part of apartment renovation. Heavy plumbing fixtures, small footage and many pipes create difficult working conditions. Another reason for the constant postponement of such repairs is the high cost of materials: tiles and porcelain stoneware. Therefore, today we will tell you about such a budget option as DIY bathroom renovation with panels. You will cope with such a repair yourself, because professional skills are not needed here, but first things first.
Do-it-yourself bathroom renovation with plastic panels has important advantages and significant disadvantages. Here we will tell you without embellishment about all the features associated with finishing the bathroom with plastic panels, as in the photo.
The pluses include:
Large assortment of colors;
Moisture resistance;
Easy to install;
The ability to hide all communications, including pipes, sewers and wiring;
Possibility of preliminary insulation of the bathroom;
Ease of care and cleaning;
The possibility of replacing part of the coating if necessary;
Cheapness.
Large selection of panel colors
The disadvantages of decorating the bathroom with plastic panels with your own hands are:
Immunity to damage and heavy loads;
Weak chemical odor that disappears during operation;
Reducing the area of the bathroom by using a thick wall covering;
Unnatural raw materials.
It is possible to repair a bathroom with your own hands, especially if you use wall panels for this purpose. Installation does not require professional skills and any special skills from you, only care and desire to make the bathroom design modern and attractive, even when finished with panels.
To repair a bathroom with plastic panels with your own hands, you need to purchase:
The panels themselves;
Reiki;
Metal profile;
Moldings;
Insulation;
Impregnation for creating a waterproof film (to protect against mold);
Liquid Nails;
Hacksaw;
Perforator;
Building level;
Meter.
Calculating the number of panels you need is pretty straightforward. Measure your bathroom and calculate the paneled area. Let's say it is equal to 9 sq.m. And the dimensions of your pvc panels for bathroom renovation are 0.6 sq.m. Hence, it is necessary to divide the "working" area into the area of one panel. We get: 9 / 0.6 = 15 pcs.
This is a rough estimate. For greater accuracy, count the number of panels for each wall separately and round these numbers.
There are two main options for mounting panels - on a rack frame or on liquid nails. The first method will allow you to hide all pipes and wiring, insulate the room, but this option greatly hides the area. The second method requires absolutely smooth work surfaces.
So you can hide the communication nodes with plastic panels.
To begin with, you need to cleanse the bathroom of past finishes. Then we treat them with a mold impregnation. The wooden frame is treated with the same product before installation.
Remove all finishing materials from the walls
While the wooden slats are drying up, we outline the places of their attachment to the bathroom walls. The upper rail is fixed under the ceiling at a distance of 6-7 cm, the lower one - at the same amount above the floor. The ceiling is processed and laid out in the same way as the walls.
Important: wooden slats are fixed perpendicular to the panel fixing. If you decide to place pvc panels horizontally, then install the slats horizontally.
At the points marked on the wall, we drill holes for the dowels. We drill the slats, drive the dowels into the wall and fasten the wooden blocks with self-tapping screws. With the help of a building level, we monitor the parallelism of all planks.
An example of a partial bathroom lathing
At this stage, you can insulate the bathroom. To do this, insulating material must be laid in the resulting niches between the slats.
Now you need to trim all panels and moldings to the height (or length) of the walls of the room.
In the corner of the room most visible from the entrance, a docking molding is installed, then we install the panel, driving it into the groove until it stops. After that, we proceed to the installation of the panel to the wooden crate. Self-tapping screws are useful here, they are screwed into a special part of the panel. For this purpose, you can purchase holders and nail them to the rails.
This is how all the further decoration of the bathroom with plastic panels takes place with your own hands. The ceiling is decorated in the same way.
Ceiling decoration with plastic panels
The second attachment option is much easier. But it needs some preliminary work to level the surface.
We start by cleansing the bathroom of past finishes. As in the first option, we apply the drug against the formation of a fungus. Then we start plastering, trying to make the walls almost perfectly smooth.
Attach the corner molding. Gently grease the inside of the panel with liquid nails, then drive it into the groove and glue it to the wall. The rest of the panels are attached in the same way.
In the video you can see how to make a bathroom renovation with panels with your own hands.
VIDEO
VIDEO
VIDEO
Bathroom renovation has always been one of the most difficult and painstaking. This is largely due to the cramped space, the presence of water pipes and a bulky bathroom. But there is another important factor that keeps many owners from major or cosmetic repairs - this is the high cost of materials and finishing work. But time and technology do not stand still, due to which new finishing materials appear on the market. One of these materials is plastic panels. Do-it-yourself bathroom repair with panels can be attributed to simple and affordable work, since special knowledge and skills are not required to decorate the walls and ceiling with this material.
Renovation of a bathroom with PVC panels certainly has a number of its advantages. But, like any other building material, plastic panels are not ideal, and therefore, along with the advantages, you need to know about their disadvantages.
The benefits include :
wide range of colors and shades;
moisture resistance. This artificial material is not susceptible to water, mold and mildew, and this is especially important in conditions of high humidity in the bathroom;
ease of installation. All work can be done alone, without special knowledge or skills. For beginners in construction, bathroom renovation with panels is very convenient;
the ability to hide communications. This feature of wall panels allows you to lay pipes or wiring anywhere in the bathroom without disturbing the beautiful design;
the possibility of additional insulation, noise and sound insulation. As in the case of communications, the space between the panels and the wall can be filled with an insulating cake;
unpretentious and easy to care for. The surface of the panels is even and smooth, making them easy to clean;
simple replacement of one or more panels if necessary. Due to the simple method of fixing the panels, if they are damaged, they can be easily replaced with new ones without resorting to large-scale repairs;
low price.
Disadvantages include :
poor resistance to mechanical damage. Unfortunately, plastic panels do not withstand high mechanical loads. But no one is going to deliberately bang something heavy on the walls in the bathroom;
artificial material;
there is a technical smell in the first days after installation. Due to the fact that PVC panels are an artificial material, the chemical industry is engaged in their production. And this, in turn, entails the use of substances with an unpleasant and not very useful smell, which will gradually disappear over time;
when mounting on rails, the usable area of the room is reduced. The advantage of wall panels to hide communications and lay an additional insulating layer is leveled by the fact that this method of installation reduces the useful area of the bathroom. And this is unpleasant, especially for bathrooms with a small area.
As noted earlier, all panel installation work is quite simple and does not require any special knowledge or skills. But before you make a quality repair of the bathroom with panels, you need to find out the features and methods of installing the panels, as well as calculate the materials.
Bathroom renovation with panels - photo
To carry out a bathroom renovation with plastic panels, certain tools and materials will be required.
From materials would need:
plastic panels;
moldings;
wooden planks with a thickness of 10 - 20 mm or a metal profile;
special metal holders;
self-tapping screws, dowels or liquid nails;
special impregnation against mold and mildew;
insulating materials.
From instrument would need:
a hacksaw with fine teeth or a jigsaw (a hacksaw for metal is perfect);
hammer drill or hammer drill;
screwdriver;
level and tape measure.
Important! There are only two ways to mount plastic panels: on liquid nails and lathing. The first option will require a flat surface of the walls and ceiling, but will preserve the usable area of the room. The option of mounting on a crate will allow you to hide communications, make additional insulation, but at the same time reduce the room. Which one to choose is up to the owners to decide directly.
Calculations of the number of panels are quite simple. To do this, you need to know the dimensions of the bathroom in order to calculate the area for finishing. For example, the area to be finished is 7.5 m2. The dimensions of the panel are 0.25 m by 2.7 m, which is equal to 0.75 m2. Now we divide 7.5 / 0.75 = 10 pcs.
Important! When performing calculations, it must be borne in mind that for the beauty of the panels it is better to mount from a single piece. Therefore, to calculate the quantity, you can measure the perimeter of the room minus the doorway and divide it by the width of the panel. It is better to round the resulting value up.
The calculation of the number of panels for the ceiling is performed by dividing the size of one of the sides of the room by the width of the panel. We choose the length of the panel based on the largest size of one of the sides. For example, if the width of the bathroom does not exceed 1.4 - 1.5 m, then you can safely buy panels 3 meters long and cut them in half. And if the largest side is more than 2 m, then panels with a length of 2.6 or 2.7 m should be chosen.
When mounting panels on a frame made of wooden bars or a metal profile, the amount of material should be calculated. To do this, you need to know the perimeter of the room, which, in fact, will be the length for one row of the frame. Further, having measured the height from the ceiling to the floor, we divide it by 0.4 m. It is this step that will be the maximum allowable so that the panels do not bend. We multiply the resulting number of rows by the perimeter, this will be the total length for the frame.
First of all, we carry out cleaning of walls and ceilings from old finishing materials. After that, we treat the surface with a remedy against the appearance of fungi and mold. If you have planned to make a frame made of wood, then we process all the bars with the same tool.
While the bars are drying, we mark the places of their installation on the walls and ceiling. The installation location of the upper bar on the wall will be 5 cm below the ceiling, and the lower one 5 cm higher from the floor or the edge of the bathroom. We keep the same distance on the ceiling with the difference that it will be from the wall. Bars on walls and ceilings should be installed perpendicular to the future panels. That is, if the panels are placed vertically, then the rows of the frame will be horizontal and vice versa.
Now we cut all the bars to the desired length and mark the points for fasteners on them. After that, we apply the block to the mark on the wall and, holding it, drill holes in it so that the marks from the drill remain on the wall. At the points obtained, we drill holes for the dowels. We drive dowels into the holes and fasten the strips to the wall using 6x60 self-tapping screws. Using a level, we make sure that all the planks are in the same plane. If the wall is uneven, then in places of large dips, it is necessary to put a gasket made of wood or other material.
Important! In narrow spaces, such as above a doorway, the frame planks can be placed close together. If it is planned to install additional lamps on the ceiling, then in the places where they are installed, the frame must be reinforced with transverse strips to which the plastic panel will be attached.
Further, if it is planned, insulating materials are laid between the rows of the frame, and you can start installing the panels in place. We begin to mount them from the most prominent corner of the room. First of all, all moldings and panels are cut to length.
Important! The panel has a tongue-and-groove connecting structure.
Then we install a docking corner molding in the corner and insert the panel into it with the side where the groove is located. With a little effort, we drive the panel inside until it stops. It remains to fix the panel to the frame strips. To do this, we use self-tapping screws 3.5x16, which we screw into the protruding spike of the panel. Also, to fix the panels, special metal holders are used, which closely support the panel and are fixed to the frame slats using self-tapping screws or nails. Subsequent panels are installed in the same way. Special moldings are placed in all corners and transitions.
Important! If at the end of the wall the panel does not fit in width, it can be trimmed lengthwise and, after installation, hide the edges with corner molding.
Installation of panels on the ceiling is carried out in the same way. First of all, the corner molding is installed, and in it the first panel. But there is one trick here. Since the ceiling is fully visible, its panels must have a symmetrical shape. Therefore, if you need to trim panels for beauty, you can trim the first and the last so that they are the same width.
The indisputable advantage of mounting ceiling panels on the frame is the ability to install spotlights. The main thing is to separate the wiring in advance and cut holes in the panels for the lamps.
This method of installation is somewhat simpler, but requires high-quality surface preparation. As with the frame mount, first remove all of the old trim. After that, we saturate the wall with a remedy for fungi and mold. Next, we plaster the wall, making its surface as even as possible. The maximum permissible error can be 2 - 2.5 mm.
Now we install the corner molding. We apply liquid nails to the surface of the panel, trying to evenly cover the entire surface. You can take a step of 20 - 25 cm. Then we apply it to the wall and put it into the groove of the molding. Install the subsequent panels in the same way.
These two options for fastening PVC panels can be combined: use liquid nails for the walls, and make a frame for the flow. This will save usable space and at the same time create a beautiful backlight.
Repair of bathrooms and toilets with plastic panels is a simple, affordable and, most importantly, cheap finishing option. Of course, the panels have their weaknesses, but there are probably more advantages. Such a simple and quick repair can be afforded by those with either little time or a limited budget.
VIDEO
The use of PVC panels for finishing the bathroom is a method that is gaining more and more popularity. Made of plastic, they are great for humid environments. Manufacturers offer a wide selection of different colors and patterns. They produce options for both walls and ceilings.
The biggest advantages are durability, ease of installation, replacement, operation. The disadvantages include low strength. The panels break quite easily from strong pressure or impact. Today it is the cheapest finishing method.
In addition, people who have just recently moved into a new house should think about such a renovation. For the first few years, the house will shrink. The covering with tiles may not withstand, give cracks, but nothing will be cheap, perhaps temporary, finishing with plastic.
If the choice still fell on the renovation of the bathroom with PVC panels, then you can invite specialists. They will do everything on a turnkey basis. Starting cost from 15,000 rubles.
But you can install the panels yourself. Packing price (10 pieces) from 100 rubles. It's simple. I suggest following the instructions.
Step 1: Calculation, material selection.
Measurements. Be vigilant and attentive so that later you will not feel sorry for the effort and money spent. Determine where and what will be in the bathroom, calculate the correct amount of material required.
Panel selection.For the bathroom, specimens with a matte or glossy surface, with or without a pattern, are suitable for a bathroom, width from 10 to 30 cm, length from 2.5 to 6 meters, thickness from 0.8 to 1.2 cm.
Approximate color options:
They also produce versions with a mirror surface, but they are not suitable for a damp room.
Step 2: Preparing for installation.
Dismantling the old coating
Choice of installation method. There are three mounting options:
Installation using guides, battens, which can be made of wooden beams, slats, plastic, metal. Fast, reliable way. Does not require wall alignment. I propose to consider it in more detail.
Selection of the necessary tools. For fastening with guides you will need: a wooden bar or slats, nails, screws, a hammer, a drill. Instead of a timber, you can use a mounting profile with fastening brackets.
Step 3: Installation.
Using a level, guides are horizontally attached to the wall. Three, attached to the wall near the ceiling, near the floor and in the middle, may suffice. But you can strengthen the structure by placing the guides at a distance of 40 to 50 cm from each other.
We begin to mount the panels from the corner farthest from the entrance. They can be attached to the guides with self-tapping screws, staples at the joint, which will then be hidden. The panels are connected tightly to each other with a lock, which is already provided in their design. Rice. Fastening panels to rails Rice. Fastening panels to rails using special brackets Rice. We fasten the panel to the metal guide using a self-tapping screw
Corners, joints are neatly masked with the help of special edging, corners. There are several types of profiles, moldings, which will make the finish with plastic panels completely complete. They are used at the joints of panels with each other in the corners, in the area of the ceiling, doors.
These areas must be protected from unwanted moisture ingress by coating with sealant. Particular attention should be paid to the junction with the bathtub. Before applying the sealant, it is necessary to give a load, that is, fill the bathroom with water. Due to this, the contact of the product with the surface will be of better quality, no cracks will form during the use of the bathroom.
So, as you can see, the process is really not complicated, fast, and does not require any special skill. In a short time, without large material costs, you can enjoy your renovated bathroom.
Video (click to play).
VIDEO VIDEO
