In detail: do-it-yourself stealth navigator 550 bike repair from a real master for the site my.housecope.com.
Forum ”STELS” Bike → Repair and maintenance → What am I doing wrong? Stels Navigator 550
Pages 1
You must login or register to post a response.
- nacnapty14
- Unknown animal
- Inactive
- Registered: 2014-05-11
- Posts: 4
- Reputation: [0 | 0]
Bought this shit a year ago. During this time, we managed to knock the carriage out. I decided to change it and then I found out that the details of this, if I may say so, "bicycle" are made of an alloy of feces (solid consistency) and some kind of metal (I can't think of a joke, unfortunately). Why such conclusions, you ask? And I will answer. The left nut did not want to succumb to the Chinese key (which apparently lacked metal.). The key just bent. I found a wonderful Soviet key. Who just began to tear this very "nut". not the worst thing, because nobody canceled the screwdriver and hammer. I knocked it out in general with grief in half. I took out a fucking shaft (which, by the way, did not want to hold the right connecting rod).
and then it came to the right nut (they forgot to add shit to this campaign).
Following the guide from your site, I went to the store for a key at 32.
Here he is, my handsome man (I gave 300 rubles for him, my pride)
Well, then I think the comments are superfluous:
And actually the question, dear experts. What am I doing wrong in this life? Maybe I need to clean up my karma?
- Vitamin
- Unknown animal
- Inactive
- Registered: 2014-05-17
- Posts: 15
- Reputation: [1 | 0]
Yes, the guys confused the key, if memory serves, then there is 36, not 32.
Bought this shit a year ago.
, it’s not so great, stick there a cartridge, like in the next branch on the Navigator 600. I also started with gurneys at one time, unfortunately, I have to invest a lot in a cheap big one, a couple of these are lying around in the country, so I’ll go for a drive on weekends, but for the soul I bought it for 22 tr, if not for my own stupidity
Video (click to play). |
Yes, and you shouldn't give up on yourself -
What am I doing wrong in this life? Maybe I need to clean up my karma?
if you call a problem an adventure, then life becomes more interesting
- nacnapty14
- Unknown animal
- Inactive
- Registered: 2014-05-11
- Posts: 4
- Reputation: [0 | 0]
I want to install a cartridge. Otherwise, there would be no need to twist this infection.
Just returned from the store, bought a noble wrench. and now I cannot understand. is it welded there chtol? The key flies off her, but she's not moving (In general, I will keep everyone informed.
- maley
- Unknown animal
- Inactive
- Where: moscow
- Registered: 2014-04-09
- Posts: 34
- Reputation: [6 | 0]
on the right side there is a left-hand thread, that is, you need to unscrew it clockwise
Bicycle workshop veloman.by produces bicycle repair any brands, any manufacturers. We repair bicycles of any complexity, from replacing a camera to assembling a bicycle. We guarantee fast and high-quality bicycle repair. We also provide warranty service for bicycles, technical inspection. If you require bike customization, you can also contact us. It is possible to visit the client or to the place of the bike breakdown. Also on this page you can ask questions you are interested in about setting up a bike, repairing a bike or simply using a bike.
Hello, tell me, please, how much will it cost to replace the SHIMANO ALIVIO RD-M430 switch rooster?
I have 4 bicycles (Ostroshitsky town), can you come to the place and prepare them for the season?
Hello, the departure of the master is possible, you can get detailed information by calling 335-09-09
Good day. I want to ask, how much will it cost to align the wheel with a figure eight (rear) at the Stels Navigatir 510?
Hello, the price depends on many factors, from about 5 rubles.
Good day!
This situation, you need almost everything to the bike. Only the frame, the stars, the wheels themselves are alive, the pedals and the steering wheel. You need 2 cameras, chain, tire, cables, rear derailleur. How much will it all cost? What's the best thing to do?
Stels 550 Navigator bike 2008.
Hello, better take a look at what you have left, the frame has its resource too. Sometimes it's cheaper to buy a new bike
How much will it cost to repair the front rim (26 ”), 2 brake systems, front gear?
The bike needs to be examined, bring your bike to our workshop.
Good afternoon. How much will it cost to replace the rear derailleur? 6-speed?
Hello, my shift knob and rear sprockets are not working, can I fix it myself?
Good afternoon, tell me how to tension the chain on the SHIMANO TY-21 rear derailleur. I have this problem on the smallest sprockets, the chain rubs against the rear derailleur.
You do not need to remove the chain, there is a tension screw on the back of the switch, it must be tightened, the rollers will move away from each other and everything will be ok, unless of course the switch is bent.
Good night, please tell me how much money it will cost to put the chain (available)
Which chain? what bike?
please help the front derailleur Shimano TY-10 I do the setting of the small sprocket I pull the cable, everything seems to be correct and switches immediately to 3, and if you screw in the bolt -n- to move it by 2 then the cable is tightly pulled by the 3rd turn on is unrealistic ((((( (
Most likely the switch is uneven or too high (if it is new), if not, it may be bent. Try to open the arms of the front derailleur (wider the opening where the chain goes)
how much will it cost to completely replace the front sprockets of the bearings (well, in general, just the front without pedals) Thank you for your answer. LTD rocco 40 bike
Good morning! tell Fuji nevada 3.0 26 wheel bike for about 3-4 years. mechanical disc brakes do not work well, both rear and front, the pads are not visually erased, the movement of the device seems to be also normal. tell me what is the reason and what can be done?
Most likely, you need to change the pads, since over time they lose their properties, but in general it is advisable to look at the master, then he will definitely determine what the problem is.
Good afternoon. How much will it cost to repair a figure eight on the front wheel + adjusting the rear derailleur?
Where can you use your services? I want to come to you from Borisov and carry out a complete maintenance of the bike.
Is it possible to put a new brake on bmx if the old one is torn
hello, I'm interested in the complete TO Mongoose Tyax expert. and is it possible for you to sort out the plug?
Good morning. Tell me how much is the tire and the camera for the bike Stealth navigator 550?
Hello, tires and tubes are of different quality, your bike needs a 26 ″ size, the cheapest option will cost about 150,000 Belarusian rubles. rub (one camera and a tire)
Hello, your Specialized Myka 26 bike can be replaced.
How much will it cost to replace a bike chain with your own / your chain on Ave 4?
Ave is GT avalanche 4.0? did I understand correctly?
Hello, how much will it cost to adjust the brakes and derailleurs of the Stels Navigator 610 + replacing the cable on the front derailleur?
Good afternoon. Can you please tell me how much will it cost to repair the carriage on a children's Stealth 170 bicycle?
Are you interested in restoring old bicycles? Or maybe you are upgrading?
There are a couple of Sport road bikes that have been gathering dust on the balcony for a long time. Of the visible defects - the absence of cameras / tires - possible deformation of the rim brakes with the need to replace the cables. Also requires a bulkhead (possibly replacement) gearshift mechanism.
Everything interests with your spare parts
Hello! Zubrenok's bike has a broken pedal. Can you help with the price of the repair? Thank you
Unfortunately, we cannot help (
Good day! Do you only produce warranty bike maintenance? If I bought a bike from a store other than yours, can you carry out maintenance on my bike?
Yes, of course, but only on a paid basis.
Good day! Tell me if it is possible to buy a 170mm left connecting rod from you, the old one hesitated. And what's the price. Thanks!
Hello, how much will it cost to replace the chain with a home visit by the master? And what time is it possible to check out?
Good afternoon.
In the Navigator Winx 18 ″ bike, the rear hub wedges (I didn't buy the bike from you).
Do you have replacement bushings? And how much?
Perhaps this is not the rear bushing, but the rear sprocket is bent, when the pedals are turned, the chain is stretched and the rear wheel cannot make a revolution.
How do I change the cable on the front derailleurs?
There is nothing complicated about this, but if you are not good at understanding it, it is better not to get in there.
Hello! Do you have a replacement rear derailleur (“cock”) mount for Fuji Nevada for sale? Do you repair and replace them?
Thank you.
Tell me, how much will it cost to set up a transfer on a Shimano planetary hub? There are only 3 of them and when they arrive from the three they jump to the two.
Hello. There is a bicycle that has been in the garage for a year.
It is necessary to lubricate the pedals (creak), tighten where necessary. Fix "speeds": jumps to 7 stars when the steering wheel is 5 speed. Pump up the wheels.
I am interested in the cost of work? Can you have some kind of price list or orientate? I'll bring the bike myself.
Hello, how much will a full MOT of Stels and Trek bikes cost?
Good day,
What is a possible defect: at the beginning of the movement when leaning on the pedal and in the process of movement when switching speeds (more often to a lower one), the chain on the rear system is reset. Gear shifting system Shimano Tourney Sis index Road bike Stork. Possible repair costs.
Most likely incorrect adjustment of the rear derailleur
how much time and money it will take to fix the brake (the problem is that the brake does not shrink the wheel and I cannot brake normally)
Hello,
Please tell me if I need to fix the eight on the rear wheel on the Trek 3900 Disk. Rim model - Bontrager AT-650. Can you help?
Hello! Tell me, how much will it cost to install the pre-gears on the bike, if they are not there?
Hello, a small wheel of a kid's bike has broken off, can it be replaced? Price?
Do you mean an attachment wheel? they change as a set with a bracket and a wheel, they are different in quality, respectively, and the price is different
I have a problem with my Racer 26-220 bike. As you can see 2, the shock absorber in the middle is large not in a vertical position, but in a horizontal position, because of this, when the shock absorber is compressed and straightened out, the inner part is rubbing against the walls, as a result of which it begins to deform. In this connection, an irritating creak occurs with each compression of the shock absorber, is it useless to self-lubricate it, is it worth buying a new shock absorber and how to deal with it?
Hello, the problem is that a good two-suspension bike costs at least $ 800. All cheap two-suspension systems come with entry-level equipment, which is why they break so quickly. There is no point in buying a new "mart", it is better to drown it altogether, make a "hardtail" (a bike without a rear shock absorber), and you will immediately feel the difference in speed 😉
Broken rear derailleur on LTD ROCCO-10 (Shimano RD-TY-21 bolt-on). What switch can and better be put instead? Thanks in advance!
You can put Shimano Torney well, or the same as stood
Since the invention of the bicycle, this means of transportation has always been popular among people of all ages and material wealth due to its simplicity of design and the absence of costs for fuel and other consumables.With the help of a bicycle, you can not only cover the necessary distances, but also go in for sports, both professional and taking leisurely walks with friends and relatives.
Despite the simple design, this vehicle still tends to break down, and without proper experience and a special tool, bicycle repairs may take a long time or not work at all. Our VeloStop website was specially created to help you understand all the intricacies of self-repair and maintenance of your bike. On our site you will find detailed step-by-step instructions for repair of any complexity with photos and videos, and at the end of each article you can ask questions of interest to the site administration or other site visitors.
To successfully repair a bicycle, you need to know its structure and the principles of operation of its individual units, as well as study the names of all its main elements. If earlier, when repairing domestic bicycles, it was possible to do with just one family, then to disassemble a modern bicycle you need a whole arsenal of all kinds of keys and special pullers. You can also learn about the necessary tool from our instructions and even find out where to buy them.
Bicycle maintenance is also worth noting, which will help delay bike repairs. Carrying out timely and high-quality maintenance of the bike, you can reduce breakdowns to a minimum and save a lot of money on spare parts. In addition, the service will help to avoid unforeseen situations while walking. From our instructions, you can learn how to use different lubricants correctly and how to buy them correctly.
In the sections of our site you will find a huge amount of information on how to repair bicycles with your own hands of absolutely any bike - children's, sports, road, mountain and walking. Our instructions are perfect for any brands of bicycles such as Stels, GT, Merida, Stinger and even domestic bicycles Salyut, Minsk and Shkolnik.
10 years on the site
user # 125592
how to raise the steering wheel on it, what should be untwisted or twisted?
11 years on the site
user # 102623
A friend has one! Doesn't complain!
12 years on the site
user # 56103
I'm thinking of taking one for myself, the budget is relatively small, because in blr
10 years on the site
user # 108018
Take a led with a normal and proven frame (two triangles). And don't even look in the direction of this freak.
8 years on the site
user # 212404
The freak is. Buy it - then you won't know who to shove it to.
Although - what to want from a budget stealth is not a Track or a Spesh.
13 years on the site
user # 34520
Yes, the model is just terrible with such a frame. Why produce such madedels, I don’t understand at all.
Yes, the model is just terrible with such a frame. Why produce such madedels, I don’t understand at all.
14 years on the site
user # 16293
Yes, the normal led for his 200 bucks.
5 years on the site
user # 701103
Red card was shown to the user for this post by the moderator Bacёk (4 November 2012 18:00)
Base: 3.5.15, 3.5.16
5 years on the site
user # 871104
bought today. seems OK
9 years on the site
user # 161680
I bought a few years ago, literally a year later the transmissions began to be terribly buggy (
Now they do not switch to the third large one (which is in the center of the bike), and on small ones the seventh gear does not work + does not go down below the third.
6 years on the site
user # 578360
I bought a few years ago, literally a year later the transmissions began to be terribly buggy (
Now they do not switch to the third large one (which is in the center of the bike), and on small ones the seventh gear does not work + does not go down below the third.
9 years on the site
user # 161680
I bought a few years ago, literally a year later the transmissions began to be terribly buggy (
Now they do not switch to the third large one (which is in the center of the bike), and on small ones the seventh gear does not work + does not go down below the third.
thanks, there will be time - I'll try
9 years on the site
user # 161680
I bought a few years ago, literally a year later the transmissions began to be terribly buggy (
Now they do not switch to the third large one (which is in the center of the bike), and on small ones the seventh gear does not work + does not go down below the third.
thanks, there will be time - I'll try
I did everything, it began to work much better Thank you!
From operating experience STELS NAVIGATOR 370
PROLOGUE
STELS NAVIGATOR 370 acquired in 2007. Operated from May to November in any weather, mainly on dirt and gravel roads. I did not carry out any scheduled maintenance, I went to the breakdown. During the season I covered 1000-1200 km. Now the mileage is about 6,000 km.
This is my first multi-speed bike, before it there were “Pioneer”, “Minsk”, “Salut”. All doubts about the gearshift system were immediately eliminated, a useful and completely reliable thing. It took a long time to get used to manual control of the brakes. I drew attention to the quality of the metal fasteners: on my previous bicycles, the threads were torn off and licked constantly. I was especially pleased with the connecting rods - another shortcoming of the previous bicycles has been fixed. The rest is a regular bike.
The detachment did not notice the loss of the fighter
During operation, the saddle was the first to break. The first malfunction, and before that there was an absurd and annoying loss! Stunned by the happiness of owning a new high-speed bike with an aluminum frame (!), I did not notice how I lost the pump, which jumped out of the standard mount on an uneven road. I still cannot find a worthy replacement for him. True, I also did not have time to evaluate its performance. So the saddle. The steel wire of the base burst at the point of attachment to the pin. I fixed it very simply by moving both ends inside the mount and tightening it well. The saddle is still in use today, but on a different bike.
After a while, the spokes of the rear wheel began to break off. To replace it, you had to remove the wheel, unscrew the cassette, insert the spoke, then put everything in place and adjust the bearings, the position of the wheel in the gear, the position of the brake, the chain with the gearshift system. The procedure is costly (I had to purchase a special key for the cassette) and time consuming. This misfortune haunted me constantly, right up to changing the wheel.
NEW TECHNOLOGIES AND RUSSIAN REALITIES
The plastic fenders failed after the branch hit the wheel. It happened on a forest path. The wing was crumpled and bent, the plastic parts of the fasteners burst. I fixed it by wrapping it with duct tape. I gave the deformed wing a shape close to the original one. A similar nuisance was repeated several times later. And yet, I don’t know why, but while riding my old bicycles, I did not notice such a phenomenon. This is what it is about. On a damp clay road, mud, sticking to the tire, drifted under the wing, where, accumulating, the wheel jammed. I had to stop and roll the bike in the opposite direction, thus freeing the wheel. There is little pleasant in this procedure. Why this happened (because of the material or pattern of the tires, because of the plastic fenders, maybe the clay in my path was especially sticky) is difficult to say. I think it's wings after all. Of course, plastic fenders are lighter and do not rust, but such operating experience nullifies all their advantages.
ABOUT CLEAN HANDS AND A HOT HEART
I don’t know what material the handlebars (grips) are made of, but very soon they became sticky and nasty. Cleaning, wiping, washing did not give any positive results. The solution to the problem was found in the purchase of an accessory unknown to me before - bicycle gloves. I liked the purchase and began to use gloves constantly. True, I began to notice that my friends began to look with apprehension and suspicion at the contrasting combination of my white hands and tanned hands.And the material of the grips is probably really unusable, since the handles began to gradually slide off the steering wheel.
The brakes as a whole performed their function properly. There were usually enough pads for the season. There is a comment on the lever position adjustment system. Very small screws with a countersunk head sour in the thread and it is very difficult to move them from their place without folding the slot. The problem was solved by replacing it with regular screws.
And I was not greedy. I loaded no more than five kilograms into the basket, as recommended by the manufacturer. Well, or a little more. One fine day, the bottom and the basket began a separate life. It did not happen suddenly, and it does credit to both the designer and the manufacturer. You must admit that it is much more pleasant to hear a creak or feel a backlash in an ending node than to suddenly crumble on the road. In my opinion, the structure of the basket is rather decorative. A very thin mesh and a thick layer of paint, on which, in my opinion, this mesh was attached to the frame. However, one cannot do without a basket, and another one of the same was purchased. I began to use it more accurately and less often.
The next malfunction manifested itself in the constant backlash of the rear wheel. Tightening the bearings did not lead to any long-term effect; after a couple of tens of kilometers, the backlash reappeared. One day the wheel just jammed. It's good that it happened in a good place and not at speed. Disassembly of the bushing revealed that the inner housing had burst. I had to buy a new wheel. The idea of making a rear wheel hub on the principle of a two-hull submarine probably has a right to exist, but not on our roads. The former “Made in yuseser”, made from a single piece of iron, were more reliable.
ABOUT THE USE OF FORECAST AND ABOUT THE BACK MIND
If I knew what would happen next, I would buy a complete wheel! I did not attach any importance to the appearance of a small hernia on the rear tire. But this inattention cost me several kilometers of grueling walk in an embrace with a bicycle in the June heat. The fact is that the tire on the rim is worn rather loosely. You can remove and install the tire without using the paddles with just one hand. It was this freedom that the camera took advantage of, sticking its inconspicuous edge out. The whole story ended with the rupture of the camera and the disruption of the Sunday walk. I had to buy a tire and a camera. The set chose Belarusian and was unsuccessful. Probably not worth saving on spare parts. After the replacement, "jumping ability" appeared. A bicycle with a frequency equal to the wheel circumference makes a small, but quite noticeable bounce. Riding became like a horse race, pretty loosening the nervous system. But every cloud has a silver lining, perhaps during such "races" I began to think about buying a new bike.
ROLLED SIVKU STEEP SLIDES
Once, during an assault on a rather steep ascent, the chain slipped over an asterisk. It's time to replace the chain. Guided by the advice of experienced, I decided to replace the star with the cassette. The cassette and chain were purchased by Shimano. The leading star turned out to be more difficult. After a long search, I found something similar in one of the local bike shops. It turned out that the diameter and number of teeth is not everything. The part was made from a thicker piece and the chain just jammed on it. I had to put the old one back. It raises no objections. When buying a cassette, I noticed a cassette with a hypertrophied large asterisk lying on the window next to my own. Until now, it has not left my head. It might be worth trying to increase the torque in low gear.
I remember as a child I envied the happy owners of the “Ukraine” produced by KhVZ, because their black and gold-embossed miracle had a footrest. It would seem a trifle, but no! How many times, glancing over the descriptions of numerous modern bicycles, I noted to myself: but he doesn't have any footrests! But on my purchase it is, so what? It turned out to be a useless and even harmful thing.How many times have I found my friend in a helpless recumbent position after a short separation. From the very beginning, the coveted footboard gradually began to bend when parked and shamefully sag on the move. None of my manipulations with a hammer could bring the footboard into working condition. After a while, everything ended with the same horizontal position of the bike and broken rear-view mirrors. Until now, this device of an incomprehensible purpose hangs in its regular place, and I am trying to find ways to use it correctly.
Looking ahead, I will say that the new bike has fenders and a footrest, and they do their job properly.
I will describe one more property of my two-wheeled friend, for which I have not found an explanation. This is his nimbleness. This is not my first bike, but I never had such a fidgety bike. What it is? Here, let's say, I am standing, and the bicycle is standing nearby and slightly leaning against me. So from this position, he always strives to leave to the side and fall. You constantly have to control him, keep your hand on the brake, keep him from escaping. The same thing happens at the post, tree, wall. If you leave, be sure to apply the parking brake with a cable, a stone under the wheel or a hole. The feint is always the same. The front wheel turns perpendicular to the frame, then a short arc in a radius centered at the point where the rear wheel touches the ground and falls. Everything happened unexpectedly and quickly so that at first I did not have time to catch the obstinate bicycle. The reason is most likely not only in gravitational forces, but also in the design of the steering column and front fork. True, this property did not negatively affect driving performance.
The last breakdown occurred towards the end of last season. First there was a backlash in the carriage. He was in no hurry to eliminate it, taught by bitter experience. The fact is that the left connecting rod is attracted to the shaft by a thin and flimsy-looking nut. It is scary to pull and break the thread, and if you miss the connecting rod, it unscrews on the go. So he always took a special key with him (the usual one does not fit). In fairness, it is worth noting that the manufacturer has conscientiously indicated the tightening torques of the main units in the passport. But where does the average user get a torque wrench? In general, at the very least, the season has finished like this. In the off-season, the unit disassembled and found a fairly competent design with moisture and dust protection devices, something like an oil seal. It was not possible to find such a thing on sale and assembled it, replacing only the ball bearings on the previous units. Of course, such a carriage will not last long. But it doesn't matter, because now I have a new leader, and this one is in reserve.
Amkhad Nazirov: What to do if the bearings are broken into pieces?
Sergey Gulyaev: I couldn't watch it to the end! Friend! You need to complete the entire school course of the Russian language for a new one! Well, if you are lazy, then firmly understand that, according to the rules of the grammar of the Russian language, using the same word, or a single-root expression in 2 or more sentences in a row is not only that sounds very unpleasant, but also simple it is simply not correct, and very illiterate.
Ice Play: and at the end the wheel slows down.
LAGARIUM: I just put 9 bearings with a pinch, I grease it, and that's all the crap to keep them, useless cunt will come soon
Valerij Sokolov: I liked it, now I know that I need such a sprocket puller
Name Family: such hard / core, I have not seen yet)))
after this repair, throw it in the trash heap!
Kuzya Kuzya: Dear viewers. Don't do that. This "repair genius" is a complete noob in technology.
Dima Popovich: haha putshipnnik that 4 UAH urot
Russian soul: What is the name of the transparent circle on the rear wheel and what is it for?
hello sedeshniy: this grease is for the sewing machine shuttle but not for these cases)))
Sekretik 228: fucking down century
Sekretik 228: hmm, this is a masterpiece
TheAeLoS: What is the name of the key
Sergey Ivanov: Yes, my friend, you did not live in the USSR. And the wheel at the end does not spin overtightened.My advice to you is to take the balls out of the cage and put them in this way, only one more bearing will have to be bought and will add as much as it will fit. And such units are smeared with grease and not silicone.
Dmitry Amelin: Horrible. The oil is not right, the cones are not locked, the brakes are not working correctly. You don’t sell bicycles by accident, otherwise people will have to buy new bicycles after your advice.
Khaletsky Anton: Thanks, helped a lot
Hots G: Thanks a lot, helped a lot
Ilya Pavlov: editing genius)
disassembly and assembly of the rear axle of the bike
how to disassemble the rear axle of a bicycle lubricate the bearings and reassemble.
Maintenance of the rear bush on loose (tapered) bearings
Using the example of the rear hub of the factory wheels Shimano MT15 MTB flat (tapered) keys on ali
REPLACING THE REAR WHEEL AXLE BEARINGS ON A BIKE
In this video I will show you how to repair a bike yourself: namely, replacing bearings (Replacing an axle with a bicycle.
How to remove or replace the rear sprocket on a speed bike with your OWN HANDS.
A puller and other tool can be bought here: https://ali.pub/2nr0ql Get 5% Income from the amount of earnings attracted.
Replacing and adjusting the bearings of the bicycle hub
There was a backlash and noise in the rear bushing, which is why I decided to replace the balls in the bearing.
How to iterate over the bike's rear hub and ratchet. DETAILS!
In this video I will tell you how to sort out the rear wheel hub of a stealth bike on balls, as well as how to disassemble it.
replacing the rear wheel bearing on a sport bike
Bicycle rear wheel hub, how to disassemble, service
My VK Useful videos from my channel about bicycle repair. 1) The rear wheel hub is serviced.
How to change rear wheel bearings. Stels Navigator 550 bicycle
Well, the backlash, of course, is the rear bushing, not the bottom bracket, which is why you pounced on the beginner.
VenOF, google about “adjusting bushings on tapered bearings”. If there is a minimum of a tool (a cone wrench costs 200-300 rubles) and straight arms, then there is nothing complicated about that.
Actually, here is a primitive little article, but with good pictures that give a clear idea of what is at stake, in contrast to many more detailed articles on the topic.
“Training is like fighting with a gorilla. You don’t stop when you’re tired. You stop when the gorilla is tired. ” (C) Greg Henderson
Is a child growing up in your family? Naturally, the kid enjoys decorating the flowers on the wallpaper, tearing them off the wall. You have to periodically wash the wall covering, glue the wallpaper. When the child grows up, you can repair the stealth navigator 550 bike with your own hands, which will return the apartment to its original appearance. Modern materials make it possible to bring to life the most interesting solutions, to completely renovate the home.
Life goes by rapidly, one day is similar to another. Do you want variety, a change of scenery? The continuous work schedule provides for constant employment in the service, you have to be at home only in the evenings. The perfect solution would be a book on repairing a peugeot 3008 apartment, which allows you to bring a new note of pleasure into your life. You can contact a specialized company that offers a turnkey service.
How to renovate your apartment or house if there is no time at all? At the moment, the opportunity to contact professionals who are ready to completely revitalize your premises is quite popular. Qualified designers develop projects, companies offer the opportunity to perform turnkey repairs of hp laptops in Khimki. You do not have to buy materials yourself, hire workers, control the process.
Amkhad Nazirov: What to do if the bearings are broken into pieces?
Sergey Gulyaev: I couldn't watch it to the end! Friend! You need to complete the entire school course of the Russian language for a new one! Well, if you are lazy, then firmly understand that, according to the rules of the grammar of the Russian language, using the same word, or a single-root expression in 2 or more sentences in a row is not only that sounds very unpleasant, but also simple it is simply not correct, and very illiterate.
Ice Play: and at the end the wheel slows down.
LAGARIUM: I just put 9 bearings with a pinch, I lubricate it, and that's all the crap to keep them, useless cunt will come soon
Valerij Sokolov: I liked it, now I know that I need such a sprocket puller
Name Family: such hard / core, I have not seen yet)))
after this repair, throw it in the trash heap!
Kuzya Kuzya: Dear viewers. Don't do that. This "repair genius" is a complete noob in technology.
Dima Popovich: haha putshipnnik that 4 UAH urot
Russian soul: What is the name of the transparent circle on the rear wheel and what is it for?
hello sedeshniy: this grease is for the sewing machine shuttle but not for these cases)))
Sekretik 228: fucking down century
Sekretik 228: hmm, this is a masterpiece
TheAeLoS: What is the name of the key
Sergey Ivanov: Yes, my friend, you did not live in the USSR. And the wheel at the end does not spin overtightened. My advice to you is to take the balls out of the cage and put them in this way, only one more bearing will have to be bought and will add as much as it will fit. And such units are smeared with grease and not silicone.
Dmitry Amelin: Horrible. The oil is not right, the cones are not locked, the brakes are not working correctly. You don’t sell bicycles by accident, otherwise people will have to buy new bicycles after your advice.
Khaletsky Anton: Thanks, helped a lot
Hots G: Thanks a lot, helped a lot
Ilya Pavlov: editing genius)
disassembly and assembly of the rear axle of the bike
how to disassemble the rear axle of a bicycle lubricate the bearings and reassemble.
Maintenance of the rear bush on loose (tapered) bearings
Using the example of the rear hub of the factory wheels Shimano MT15 MTB flat (tapered) keys on ali
REPLACING THE REAR WHEEL AXLE BEARINGS ON A BIKE
In this video I will show you how to repair a bike yourself: namely, replacing bearings (Replacing an axle with a bicycle.
How to remove or replace the rear sprocket on a speed bike with your OWN HANDS.
A puller and other tool can be bought here: https://ali.pub/2nr0ql Get 5% Income from the amount of earnings attracted.
Replacing and adjusting the bearings of the bicycle hub
There was a backlash and noise in the rear bushing, which is why I decided to replace the balls in the bearing.
How to iterate over the bike's rear hub and ratchet. DETAILS!
In this video I will tell you how to sort out the rear wheel hub of a stealth bike on balls, as well as how to disassemble it.
replacing the rear wheel bearing on a sport bike
Bicycle rear wheel hub, how to disassemble, service
My VK Useful videos from my channel about bicycle repair. 1) The rear wheel hub is serviced.
How to change rear wheel bearings. Stels Navigator 550 bicycle
When choosing a bike, you must take into account its purpose, optimal technical characteristics and cost. Mountain bikes are expensive and not suitable for everyone. The Stealth Navigator 550 is a versatile and fairly budgetary model. However, its features are not suitable for everyone, so it is recommended to study the characteristics of the sample and determine the feasibility of purchasing.
The company is Russian, but components are purchased from China and Japan. Bicycles are inexpensive, so they are often bought as transport for teenagers.
The manufacturer boasts a fairly rich assortment. Among the presented samples, you can choose a model with a variety of characteristics and technical features.
The assembly is not of high quality. Popularly, these bikes are considered a recreational option for teenagers and non-professional riders.
Any bike has its own characteristics. Stealth Navigator 550, according to the idea of design engineers, is equipped with an unusual frame. The geometry of classic bikes is made up of a triangle. This type of frame design is considered the most stable and durable. However, the bike in question has its own characteristics. The designers did not adhere to standard traditions and developed something new. As a result, an outgoing beam was formed at the frame. It does not give any particular advantages, but many people remember Stealth Navigator 550 for this feature.
According to reviews, such a frame does not look very attractive. Others, on the other hand, believe that the emerging beam gives a special convenience when landing.
According to the type of suspension used, all bicycles are divided into two types:
- Two-suspension. They have shock absorption on two wheels. But because of this feature, the bikes are capable of crossing mountainous terrain and can jump on curbs. However, they are too heavy.
- Hardtails. The design includes only a fork on the front wheel. They are not designed for mountain trails and are mainly used on cycle paths and in the park.
Stealth Navigator 550 can be classified as a hardtail. It has no rear suspension. Only the front shock absorber is included. Therefore the model is not intended for mountain descents. However, the rear is reinforced, so many teenagers can easily overcome curbs and other obstacles, and the bike withstands this maneuver.
It should be noted that the bike is still not equipped with a high-quality spring-shock absorbing system. But models from the budget price category are not equipped with this kind of design. Therefore, jumping over obstacles is quite significantly felt by the rider.
Despite the lack of rear suspension, the sample belongs to mountain bikes. The manufacturer claims that it can be used to overcome rough terrain and drive off-road. Consumers appreciate the Navigator 550 for its versatility. Its design is suitable for teens and adults.
When examining the Stealth Navigator 550 bike, the performance looks pretty decent. For a mountain bike, it has a fairly low weight - only 17 kg. But it should be borne in mind that the mass is calculated without taking into account the components. The standard kit includes:
Among the characteristics, the steel frame should be highlighted. Of course, the material is cheap, but not as durable. Higher quality models have an aluminum frame. Steel has its drawbacks. One of them is susceptibility to corrosion. Therefore, the Stels Navigator bike is not recommended for use on a rainy day. In addition, the rules of operation and storage should be observed. So, it is better not to store the bike in an unheated garage or on an unglazed balcony in winter. After racing through puddles, it is best to wipe the bike body dry.
The Stels Navigator bike is no different from other mountain bikes and has 26-inch wheels. The manufacturer took care of the cross-country ability and installs tires with aggressive tread. Thus, the model is suitable for overcoming rough terrain, but do not forget about the poor quality suspension.
It is necessary to note the particularly durable rims, for the production of which an aluminum alloy was used. As a result, they are strong yet lightweight. To overcome mountain paths, the wheel structure is specially reinforced.
The Stealth Navigator 550 is a mountain bike. For this, 21 speeds are provided. However, the simplest system is provided for switching them. But, judging by the feedback from users, if they are correctly adjusted, then they completely fulfill their purpose.
There are completely different opinions among buyers. Many satisfied riders. The model is universal, suitable for beginners and experienced cyclists. Many people buy a bike for teenagers to ride in the yard. Parents are satisfied with the low price of the model. The quality characteristics are pretty decent. The bike can withstand daily loads and fully justifies its value.
However, Stealth Navigator 550 has negative reviews from professionals. The bike's external data is pretty decent. It looks like a mountain. But if we consider its technical features, then its true purpose is walking in the park or bike paths.
Stealth Navigator 550 has had its admirers for a long time. Some are satisfied with its availability, others - with its versatility, and others appreciated the presence of good characteristics. Among the advantages, users distinguish:
- Striking appearance.
- Strong, lightweight steel frame.
- The presence of plastic fenders.
- Aluminum rims and reliable braking system.
- Low weight.
- The presence of a footrest.
- The ability to jump on curbs.
- Affordable price.
Bicycles are more often taken as a walking option or for teenagers. If you are looking for a professional mountain bike, this may be your first choice.
For those who are looking at the Stealth Navigator 550, the price of the model helps to make the final choice. A bicycle, depending on the place of purchase, can be purchased for 9000-11000 rubles.
The Navigator 550 bicycle has an aggressive and striking design. It belongs to a mountain bike, but its real purpose is bike paths, forest paths and light off-road terrain. Based on the reviews, the bike behaves well on the road, the steering wheel is agile and easy to control.
Many people notice that the bike is a family one. Its unusual frame allows men, women and growing children to sit comfortably. The bike is reliable, strong and bright.
It is important that the steering wheel is height adjustable. Therefore, many people buy a bicycle for children, and it “grows” with them. At the same time, dad or mom can use the bike by simply adjusting it for themselves.
Video (click to play). |
Don't worry about the G8. The rims are used Japanese aluminum alloy. They do not bend even under the weight of an adult and can withstand heavy loads. The complete set is completed with reliable brakes. They react clearly and stop the bike even on wet trails. A stylish saddle is provided for maximum comfort. It is convenient for frisky teenagers, brutal men and demanding women to sit on it.