DIY yatour repair

In detail: do-it-yourself yatour repair from a real master for the site my.housecope.com.

Video (click to play).

  • Image - DIY yatour repair

    After purchasing and installing the yatour mp3 adapter, one problem was identified that was discussed more than once on many forums, including lexus. She has several solutions, and today I will tell you about one of them.

    The fact is that the chayzer's head unit has such a problem that after connecting the yatour adapter, the radio, cassette, and even a disc begin to interrupt with a frequency of 8 seconds. This all continues until you unhook the connector from the changer. Attempts to turn on, turn off the radio itself or the ignition are useless. When you constantly listen to only a USB flash drive, it does not annoy, but if you want to switch to the radio, you have to go into the glove compartment and unscrew the connector for the changer.

    In order to solve this problem, we need:

    - Diagram of the radio cassette changer connector;

    - Some free time.

    1. According to the changer connector diagram, we find the plus of the power supply, which comes to the yatour itself (called acc) and remember the color of the wire (in my case, blue).

    2. Next, we outline the place where we will put the switch and open the wire.

    3. We find this wire, cut it, clean it and solder it to the switch.

    4. We check the performance and put everything back.

    This method is good for those who have installed the changer in the bar. If you have it in the glove compartment, then you can make a separate button in the plug or somewhere else, simply by lengthening the wire.

    Pyzhevod-active
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repair

    Group: Pyzhevody
    Posts: 127
    Registration: 7.1.2012
    From: Novocherkassk
    User #: 5 648

    Yatour yt-m06. Everything plays, reads folders, BUT the sound is quieter than radio and CD.
    It does not cause much inconvenience, however, the question torments me (and perhaps not only me) can the sound level be increased and what is required for this?
    I suppose that the Chinese brothers soldered something superfluous or, on the contrary, did not solder the necessary one. If someone can suggest a solution to the issue, I will be very grateful!

    Post has been edited Goodwin161 – 16.2.2014, 14:11

    Bronze Pyzhevod
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repair

    Group: Pyzhevody
    Posts: 432
    Registration: 17.10.2011
    From: Korolev
    User #: 4 939

    As far as I understand, the sound from yatour to RD4 is transmitted not analog, but digital. And therefore, you need to not solder something, but poke around in the firmware or configuration files. Somewhere here on the forum I read a description of a similar model, the owner wrote that you can create a text file in which to describe the necessary settings. But I have not found such information anywhere about Yatour. Perhaps, to change these settings, you will need to look for where to solder the console or, in general, a low-level programmer. If anyone knows, tell me pliz)

    Golden Pyzhevod
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repair

    Group: Club veterans
    Posts: 1 144
    Registration: 9.7.2012
    From: Volgograd
    User no .: 7 093

    Pyzhevod-active
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repair

    Group: Pyzhevody
    Posts: 127
    Registration: 7.1.2012
    From: Novocherkassk
    User #: 5 648

    Vicious bully
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repair

    Group: Club veterans
    Posts: 2,195
    Registration: 2/14/2009
    From: Korolev
    User #: 15

    Pyzhevod-active
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repair

    Group: Pyzhevody
    Posts: 127
    Registration: 7.1.2012
    From: Novocherkassk
    User #: 5 648

    Vicious bully
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repair

    Group: Club veterans
    Posts: 2,195
    Registration: 2/14/2009
    From: Korolev
    User #: 15

    Bronze Pyzhevod
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repair

    Group: Pyzhevody
    Posts: 432
    Registration: 17.10.2011
    From: Korolev
    User #: 4 939

    Pyzhevod-novice
    Image - DIY yatour repair

    Group: Pyzhevody
    Posts: 32
    Registration: 10.4.2013
    From: Kirishi
    User #: 9 172

    Pyzhevod-active
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repair

    Group: Pyzhevody
    Posts: 127
    Registration: 7.1.2012
    From: Novocherkassk
    User #: 5 648

    I would be very grateful for the useful information

    Pyzhevod-novice
    Image - DIY yatour repair

    Group: Pyzhevody
    Posts: 32
    Registration: 10.4.2013
    From: Kirishi
    User #: 9 172

    So, I found a multimeter.What can I say.
    Here is the schematic for the op-amp:

    The current connection is shown in red. Green - connection with theoretical volume increase. Who wants to try - unsubscribe only)
    Need to break the chain (neatly, recoverable) after C13 and C22. After throwing 2 wires from terminals C13 and C22 to the 3rd and 18th legs BA3131FS
    Capacitor designations on the Yatour board.
    All at your own peril and risk, not a verified instruction! I would check, but my changer is not registered.

    Post has been edited EwgenQZ – 19.2.2014, 22:55

    Pyzhevod-active
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repair

    Group: Pyzhevody
    Posts: 127
    Registration: 7.1.2012
    From: Novocherkassk
    User #: 5 648

    So, I found a multimeter. What can I say.
    Here is the schematic for the op-amp:

    Pyzhevod-novice
    Image - DIY yatour repair

    Group: Pyzhevody
    Posts: 32
    Registration: 10.4.2013
    From: Kirishi
    User #: 9 172

    Pyzhevod-active
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repair

    Group: Pyzhevody
    Posts: 127
    Registration: 7.1.2012
    From: Novocherkassk
    User #: 5 648

    Club diamond
    Image - DIY yatour repair

    Image - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repairImage - DIY yatour repair

    Group: Club veterans
    Posts: 13,217
    Registration: 9.9.2011
    From: Moscow
    User #: 4 634

    When will you already understand that Yatur is a low-grade Chinese. There will never be quality for it. Most unstable end-user solution. And the wires are confused during assembly and the radio tape recorders stop working, the sound is quiet, often a marriage.
    Take a cheap MP3 player, buy an AUX cord for $ 6 at any Chinese forum - that's it. Or the simplest FM transmitter for 10 dollars per cigarette lighter. This is quite.

    Post has been edited 407s – 20.2.2014, 22:47

    How to choose Yatour?
    Everything that is important to know: make, model, year of manufacture of the car. Everything else is the work of our managers. You can always contact us for advice by calling by phone or e-mail.

    I did not select the right connector. What to do?
    All placed orders are checked by managers. Even a paid order can be corrected in time before transferring it to the delivery service. But if this happens, we will replace the adapter with a suitable one free of charge.

    I connected it. Music is playing, but tracks are not displayed.
    Most likely we are talking about Citroen / Peugeot / Renault cars. Some models require activation of the CD changer connector. This operation can be done in almost any center or on your own using a Lexia scanner.

    How's the sound?
    The sound is great. Compare to CD. Sometimes music can play a little quieter than the same CD. Here, a lot depends on the quality of the mp3 file that you recorded on the USB flash drive.

    Yatour and interference
    During the operation of Yatour, sometimes interference and extraneous noises are heard. Short-circuit these two wires, if any.

    Can I flash it?
    The manufacturer has not implemented such an opportunity.

    Thank you for purchasing the YATOUR YT-M06 / M07 adapter, which is specially designed to
    give you endless hours of music enjoyment in good sound quality and convenient control through the car radio of most cars.

    The YATOUR Car Adapter allows you to easily get full access to your media collection in your car, including randomly selecting songs, flipping through folders, switching tracks, as well as adjusting the volume - all using the built-in factory car radio and using the multifunction steering wheel (if available) ... This adapter will allow you to listen to your favorite music from a flash drive or SD card without requiring special players. The YATOUR adapter also has an additional AUX input.

    1.3 Main advantages of USB mode

    - Ability to manage a significant number of songs recorded on a USB disk or flash drive.
    - The folders on the USB drive named CD01, CD02, CD03 ... will be displayed as separate "Disks" on the head unit of your car.
    - In each "Disk" you can store up to 999 songs in MP3, WMA, AAC format.
    - The number of "Discs" is limited only by the head unit (on some radios, up to 99 discs are possible).
    - The last played song in the playlist is remembered.
    - Once started, the track is played from the moment it was interrupted.
    - Through the AUX input, you can connect any device that has a headphone output.

    Install the adapter securely in a place protected from heat, moisture, moving parts, and direct sunlight. Beware of hot air currents from your vehicle's climate system. The adapter should be fixed in a convenient place, free from sharp metal edges, using double-sided tape, Velcro. Basically, the device is mounted in the glove compartment with double tape. Adapter operating temperature range from -30 ° C to + 70 ° C

    • This product is not compatible with other accessories (OEM).

    • The purchase of this product does not make any warranties, express or implied.

    • Although every possible precaution has been taken to ensure the quality of the device, we cannot guarantee that it will function correctly if installed in violation of the instructions included in this manual. In addition, we cannot guarantee the correct operation of the YATOUR adapter with broken, damaged or unsupported USB drives.

    • The manufacturer is not responsible for the misuse of this product, including improper installation, damage to the dashboard or radio during installation, and illegal use of the player.

    • Watch the road while driving!

    1.6 Scope of delivery

    The kit consists of a YATOUR device, one specific for each car, a connection wire, a 3.5mm AUX cable, an instruction manual.

    In most cases, installing the adapter requires removing the factory radio in order to be able to connect a special cable. Some vehicles have the ability to connect through the front passenger's glove compartment. If the CD changer connector in the car radio is occupied by the plug from the TV tuner or the multiplex unit, then a tee cable is required when connecting the adapter (not included in the package)

    2.2 Preparing and installing the adapter:

    1. Format the flash drive with FAT 16/32 file system. There are no requirements for folder names.

    Save music files in each folder, up to 999 songs in each folder.

    2. Switch off the vehicle and remove the ignition key.

    3. Dismantle the radio in order to gain access to the rear panel of the device. Some cars require special tools for this. If necessary, please consult with car dealers or auto studio specialists.

    4. Connect one end of the car adapter cable (date cable) to the CD changer port on the back of the car radio. Make sure the connection is firm, but do not pinch it. Connect the other end to the YATOUR adapter.

    5. For VW / Audi / Seat / Skoda cars with extra wire (GND). It is necessary to connect this wire under the bolt or frame (mass) of the car head unit.

    6. To connect to car radios Nissan and Pioneer, in addition to connecting the main plug, you must connect two additional wires. ACC +12 volts when the ignition key is in ACC, BAT + 12 volts constant. It is only necessary to connect these wires to the power plug that goes to the car radio.

    7. Turn on your radio and switch it to the CD changer mode using the Disk, Mode or CD button on the head unit (depending on the type of radio). The red indicator on the adapter turns on. The screen on the radio tape recorder should show the mode AUX - Disc 05, Track 55. Connect the previously prepared flash drive to the YATOUR adapter, after scanning Disc 01, Track 01 will play

    8. After confirming that the adapter is working, proceed with the installation. If you have any problems with the installation, please refer to the Troubleshooting section. Find a place for the adapter. In most vehicles, the dashboard provides convenient installation locations.

    9. Note: be sure to install the YATOUR adapter in a suitable place, so that when you put the radio in place, you will not break the adapter.You can use the glove compartment or other suitable place to expose the USB cables from the adapter to the outside.

    10. Replace the head unit, making sure it is securely in place.

    3. Troubleshooting.

    3.1 The radio tape recorder does not recognize the YATOUR adapter

    To connect the adapter to Peugeot / Citroen radios, you need to contact the official
    dealer to activate the CD changer input.

    In radio tape recorders Mazda Demio, Mazda 6 until 2005, it is possible to activate the CD changer input, it is necessary
    disassemble the radio and solder the jumper (s). Seek advice from specialists.

    In the Harrier / RX radio, after installing the adapter, you need to remove the battery terminal for 5-10 minutes.

    3.2 The adapter does not "see" the flash drive.

    The clusters on the flash drive are damaged. The computer sees such a flash drive. Unfortunately, the adapter will not see such a flash drive. You need to format the flash drive using a utility from the manufacturer of this flash drive, or use another flash drive for the adapter.

    3.3 I added additional folders to the flash drive, but the adapter does not see them.

    When recording new music files to a flash drive, you should activate AUX on the radio, then connect the flash drive.

    On radios Audi, Volkswagen, Skoda, it is possible to save only 6 folders to a flash drive.

    Each folder can store up to 999 songs, the radio screen will display: 100 song
    - track 01, 102 - 03, 133 - 34….

    4. Guide for use

    This device can work in two modes USB and AUX. To switch modes, you need:
    • Turn off the radio or switch to another mode, such as radio.

    • Wait until the indicator on the flash drive turns off.

    • Disconnect the flash drive from the adapter.

    • Connect the AUX wire to the adapter socket.

    • Turn on the radio and switch to adapter mode. The screen on the radio should show Disk 05, Track 54. AUX input is active.

    4.2 Switching folders and tracks, rewinding within a track

    To switch tracks (songs), use the TREСK - .TRECK + buttons on the radio.

    Switching folders DISK-, DISK +. To fast-forward within a track, hold down TRECK +, backward TRECK -.

    4.3 SCAN, RANDOM, REPEAT mode

    SCAN - scanning a folder, tracks are played for 10 seconds.

    RANDOM - tracks are played in random order.

    REPEAT - automatic repeat of a track.

    5. Specifications

    Supported media ………………… USB / SD / SDHC up to 16gb, 32gb-only high-speed
    Reading Files ……………………………… MP3 / WMA / iTunes (AAC)
    Input for additional devices ... AUX 3.5 mm
    device size …………………………… 94 x 66 x 16 mm
    Supply voltage…………………………. 10.5-14.5V
    Signal-to-noise ratio ……………………… 95dB
    Consumption current (Min / Max) ………………. 3/200 mA
    Total harmonic distortion …… ..0.01%
    Set weight ………………………………… 280 g
    Operating temperature range ……………… -35 ° C- +85 ° C
    Year of issue …………………………………… .2014
    _____________________________________________________________________________

    • Like
    • I do not like

    Image - DIY yatour repair

    Thermometer Oct 28, 2015

    yatur is a regular mp3 player that transmits a signal through aux, and there is something like a CD changer emulator.

    the aux is displayed, the player is connected, I change the flash drives if necessary.

    • Image - DIY yatour repair

    the aux is displayed, the player is connected, I change the flash drives if necessary.

    the aux is displayed, the player is connected, I change the flash drives if necessary.

    • Like
    • I do not like

    Image - DIY yatour repair

    Rastamashin 29 Oct 2015

    What's the point of reinventing the wheel?

    yatur is a regular mp3 player that transmits a signal through aux, and there is something like a CD changer emulator.

    And not by linemen, by any chance? I don’t know myself.

    The plus is that it somehow transmits information to the standard display, adjusts the sound, clicks the tracks.

    And so, in fact, the player as in the pictures above is the same.

    • Like
    • I do not like

    Image - DIY yatour repair

    alexxx86 30 Oct 2015

    • Like
    • I do not like

    Image - DIY yatour repair

    Thermometer 31 oct 2015

    yatur is a regular mp3 player that transmits a signal through aux, and there is something like a CD changer emulator.

    And not by linemen, by any chance? I don’t know myself.

    The plus is that it somehow transmits information to the standard display, adjusts the sound, clicks the tracks.

    And so, in fact, the player as in the pictures above is the same.

    It is for the aux, because in this connector it is the aux input, the head controls the CD changer, the yatur understands these commands and gives to the aux what is asked of him

    and maybe someone can tell you the pinout of the yatura lace under the Mazda 3?

    what is where to solder in a regular GU.

    for example: there is a yatur from a Honda Civic. what wires where to solder in our gu.

    Post has been editedigoryok: 31 October 2015 - 11:22

    • Like
    • I do not like

    Image - DIY yatour repair

    Thermometer 31 oct 2015

    and maybe someone can tell you the pinout of the yatura lace under the Mazda 3?

    what is where to solder in a regular GU.

    for example: there is a yatur from a Honda Civic. what wires where to solder in our gu.

    In the evening I can provide you with a cord from the yatur.

    and maybe someone can tell you the pinout of the yatura lace under the Mazda 3?

    what is where to solder in a regular GU.

    for example: there is a yatur from a Honda Civic. what wires where to solder in our gu.

    In the evening I can provide you with a cord from the yatur.

    As I understand it, these yatura are generally universal for all brands of cars. the only difference is in laces

    I want to buy a used car, but there is no Mazda in Krasnodar.

    I'm thinking of buying, cutting the lace and soldering it into the radio tape recorder. ride?

    • Like
    • I do not like

    Image - DIY yatour repair

    Thermometer 31 oct 2015

    and maybe someone can tell you the pinout of the yatura lace under the Mazda 3?

    what is where to solder in a regular GU.

    for example: there is a yatur from a Honda Civic. what wires where to solder in our gu.

    In the evening I can provide you with a cord from the yatur.

    As I understand it, these yatura are generally universal for all brands of cars. the only difference is in laces

    I want to buy a used car, but there is no Mazda in Krasnodar.

    I'm thinking of buying, cutting the lace and soldering it into the radio tape recorder. ride?

    I think yes. But I saw 2 yatura with different outputs.

    and maybe someone can tell you the pinout of the yatura lace under the Mazda 3?

    what is where to solder in a regular GU.

    for example: there is a yatur from a Honda Civic. what wires where to solder in our gu.

    In the evening I can provide you with a cord from the yatur.

    As I understand it, these yatura are generally universal for all brands of cars. the only difference is in laces

    I want to buy a used car, but there is no Mazda in Krasnodar.

    I'm thinking of buying, cutting the lace and soldering it into the radio tape recorder. ride?

    I think yes. But I saw 2 yatura with different outputs.

    Hey!
    You promised me to look at the adapter pinout. Help me out, I really need this adapter
    Image - DIY yatour repair

    Who has YATOUR (crap instead of a changer for playing MPZ) a question for you.

    I also have a large current (y) in heat.)) For a long time, you need to turn it off.

    ... sent from one place.

    Yelling in full compared to the radio? It's just that when it switches to a radio wave, the difference is very noticeable. Maybe you can send a couple of files, I'll fill it with a USB flash drive and check the difference. They say that you can somehow record MP3 by increasing the volume. I do not rummage in this.

    I also have a large current (y) in heat.)) For a long time, you need to turn it off.

    ... sent from one place.

    This crap is on the gold, no problems with dropping the battery were observed.

    Sent from my iPhone using Tapatalk

    My battery in the car (75AH) sucked out in 2 weeks in winter. I also looked for the reason for a long time, I wanted to change the battery.

    ... sent from one place.

    My battery in the car (75AH) sucked out in 2 weeks in winter. I also looked for the reason for a long time, I wanted to change the battery.

    ... sent from one place.

    In LT, the changer is under constant power supply. We must outweigh the ignition and all the love.

    Sent from my iPhone using Tapatalk

    Yes, the volume really differs to disgust) I'll take it to Ertu on occasion, let them raise it) I'll tell you later.

    Sent from my iPhone using Tapatalk

    I understand that you need to break the yellow wire with a relyukha. Or supply power to Yator through the castle. So that when the ignition is off, it is cut off. But then it will be reset and will constantly start playing from the first song.
    But since he plays very quietly, I still listen to the radio mostly.

    Espan And where does Erta and Yator have to do with it? Erta seems to be making a Trioma, a competitor of a direct yator :-))) Well, if they correct it, of course, then you sign off.

    It took a long time after the installation of the frill. Not a drop of water successfully performs its functions, and after snowfall and wind, not a snowflake under the hood. The noise from the internal combustion engine and the vibration from the windshield. The result is satisfied. Read more

    Hello everyone! To be able to play music via usb / aux on the head unit, I connected the Yatour adapter and brought it into the glove compartment. The adapter works fine. Only every time to change the flash drive, it is a little inconvenient to climb into the glove compartment, and there is a risk of transmitting the aux cable when the glove compartment is closed.
    On a well-known site, I accidentally stumbled upon a usb / aux connector.

    Car USB AUX Headphone Male Jack Flush Mount Mounting Adapter Panel Input AUX Pro Connector 3.5mm 12V For Most Cars Use 2017 New
    s.aliexpress.com/3u2ieuiy?fromSns=VK
    (from AliExpress Android)

    I ordered it and came pretty quickly. The quality is quite satisfactory. I decided to embed it into the cover of the diagnostic connector, and move the adapter itself from the glove compartment somewhere under the central panel.

    Image - DIY yatour repair


    The plugs look good

    Image - DIY yatour repair


    I melted the hole in the lid with a heated sheet of metal, then fitted it with a knife and a file

    I wanted to place the connector in the middle of the cover, but the connector would have rested against the plastic from the central tunnel, I had to move it down.

    Image - DIY yatour repair


    I cut the upper corners a little, I was afraid that they would rest

    Image - DIY yatour repair


    To pull the wire, I had to disassemble the entire panel

    Image - DIY yatour repair


    The adapter was wrapped in a rag so as not to blur, and pushed it between the air duct from which it blows into the driver's legs and the decorative pad under the steering wheel. Plotnenko climbed in there, should not fall out.

    Image - DIY yatour repair


    The wires were secured with ties

    Maybe someone will come in handy) Thank you for your attention!

    Group: Users
    Posts: 95
    Registration: 1.4.2010
    Town: Tomsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Been thanked: 4 times

    Group: Users
    Posts: 53
    Registration: 9.10.2012
    Town: Orenburg
    Auto: Mazda 2
    Gender: Male
    Been thanked: 4 times

    Group: Users
    Posts: 95
    Registration: 1.4.2010
    Town: Tomsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Been thanked: 4 times

    Group: Users
    Posts: 53
    Registration: 9.10.2012
    Town: Orenburg
    Auto: Mazda 2
    Gender: Male
    Been thanked: 4 times

    Group: Users
    Posts: 95
    Registration: 1.4.2010
    Town: Tomsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Been thanked: 4 times

    Group: Users
    Posts: 11
    Registration: 12.7.2012
    Town: Khabarovsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Been thanked: 0 times

    Group: Users
    Posts: 53
    Registration: 9.10.2012
    Town: Orenburg
    Auto: Mazda 2
    Gender: Male
    Been thanked: 4 times

    Group: Users
    Posts: 11
    Registration: 12.7.2012
    Town: Khabarovsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Been thanked: 0 times

    Group: Users
    Posts: 53
    Registration: 9.10.2012
    Town: Orenburg
    Auto: Mazda 2
    Gender: Male
    Been thanked: 4 times

    Group: Users
    Posts: 151
    Registration: 7.9.2012
    Town: Novosibirsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Has thanked: 7 times

    Group: Users
    Posts: 4
    Registration: 15.9.2013
    Town: Vladivostok
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Been thanked: 0 times

    Acquired YATOUR YT-M06. Connected, refused to work the first time. Poke your finger where you need to solder, solder. Radio CQ-JM0500AK

    Post has been edited Amph – 26.10.2013, 11:44

    Group: Users
    Posts: 151
    Registration: 7.9.2012
    Town: Novosibirsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Has thanked: 7 times

    Group: Users
    Posts: 4
    Registration: 15.9.2013
    Town: Vladivostok
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Been thanked: 0 times

    Group: Users
    Posts: 151
    Registration: 7.9.2012
    Town: Novosibirsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Has thanked: 7 times

    Group: Users
    Posts: 4
    Registration: 15.9.2013
    Town: Vladivostok
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Been thanked: 0 times

    Group: Users
    Posts: 151
    Registration: 7.9.2012
    Town: Novosibirsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Has thanked: 7 times

    When connecting any audio player (if the correct adapter), two minuses in the photo should be closed in the audio device, if your media button does not start functioning, then your minuses are not closed. The conclusion is the wrong adapter or something messed up with the connection. For the sake of experiment, close these 2 minuses just on the mafon without everything and the media button should work

    Group: Users
    Posts: 151
    Registration: 7.9.2012
    Town: Novosibirsk
    Auto: Mazda Demio (2002-2007)
    Gender: Male
    Has thanked: 7 times

    ● Buy #YATOUR HERE: goo.gl/roqEZO
    💥AliPrice An irreplaceable assistant when shopping on AliExpress: bit.ly/2lfzG4T
    ePN Cashback Great service GET UP TO 18% MONEY REFUND FOR EACH PURCHASE! cashback.epn.bz/?inviter=dc07e
    Receive an Income 5% of the earnings of the attracted webmaster ali.epn.bz/?id=dc07e
    GROUP VK.Various things from China -
    My affiliate media network youtube join.air.io/vrik
    Aliexpress ali.pub/uhfdl
    Online store - Gearbest: ali.pub/j3g41
    Aliexpress. Anything different from China! VK group: ✔
    ● How to make money on BRreporter ✔
    ● YOUR ADVERTISING on the Channel Anything different from China ✔
    ● How to make money on Aliexpress ali.epn.bz/?id=dc07e
    Last minute goods - group purchases on Aliexpress! Discounts up to 90%: ali.pub/uimqe
    ● DON'T FORGET TO SUBSCRIBE AND LIKE! And Yes Here's My Life Channel:
    brreporter.com/block-UCHL86.
    My Blue Knife - Human Package - My Camera - Ceramic Knife - Motorcycle Model: Everything Is Here.
    Reviews and tests on products - bit.ly/1NdX1KM
    Unboxing phones and tablets - bit.ly/1VEhcYU
    Watches from China.- bit.ly/1NdXJrr
    Clothes from China.- bit.ly/1SEPu9E
    Radio-controlled models.- bit.ly/1SEPB4U
    Auto-gadgets from China.- bit.ly/1VEhMpF

    mamuka chincharauli 7 meses atrás

    Please Get, How to install YATOUR with your own hands. Installation and test "merceders-benz c203 w203 2003-2007. thanks in advance

    alexander var 2 anos atrás

    do not remove the cover from the panel as he did, break the hook on the right side!

    Vladislav Vlasov 4 anos atrás

    T-Wood Woodley 4 anos atrás

    The video is a little muddy) I also noticed a bracelet with rubber) Anyway Like)

    Vladislav Bukhov 4 anos atrás

    Isn't it easier to pull it out into the duct?

    Cool! And infa useful, I guessed that there is a block under the changer) I'm thinking of a 1-din Car receiver from Soundmax (well, this is the first one) with support for SD memory cards and devices with a USB interface. 4x45 700 rubles, I have not used CD for a long time.

    It was sowing a pribluda on a 60-ke. It worked without a troublesome flash drive-transid, everything was according to the instructions-folders under the numbers, etc. the car was 04m, the device was bought and put on Korchagin street (VDNKh) .h.z. why you are not robbed.

    Bitrate-FSUs. And the order was never set up, she played as she wantedImage - DIY yatour repair

    Romario, hello. holiday greetings!!Image - DIY yatour repair


    On the topic, my sequence of recording and playback did not match.

    kiruha288,
    there are no secrets. but there are some, so to speak, features!
    So, what is noticed, besides the fact that you need to correctly number the folders - the number of folders is 10 (CD01-CD10) on my S80-'04, if more, then it will read, but show again as 01, 02..10. Any bit-rate - up to 320, in the order of playback - as recorded (queue) and plays, but if you do not turn off the ignition during playback. Those. How I do it, I listen to the flash drive, switch. on the radio, 5-10 sec pause, ignition off. Not very convenient, of course, but the order of playback does not mix. And by the way, if off. ignition when playing. flash drive, writes an error according to AUM.

    Added after 2 minutes
    And yet, about flash drives.
    I have a very good reading of all A-DATA, of any size (of those that I tried), the rest after one

    I can offer the vehicle to drive up to someone whose device works in accordance with the declared characteristics and determine what is the cause of such hemorrhoids - an adapter, a radio tape recorder or a flash drive. If you are in Moscow, you can visit me.

    Image - DIY yatour repair photo-for-site
    Rate the article:
  • Grade 3.2 who voted: 84