DIY roller blinds repair

In detail: do-it-yourself roll blinds repair from a real master for the site my.housecope.com.

Do-it-yourself blinds repair is quite possible at home. To do this, you need to have tool skills and a creative mind. Without these qualities, it is more expedient not to try to fix the problem, but to call an experienced specialist. If you have skillful hands, the remaining components and parts missing for repairing blinds with your own hands can be easily purchased in specialized stores.

Window blinds are a stylish and functional accessory for any interior - be it an office of a reputable company or a living room of a private house. As a convenient and modern alternative to classic curtains, blinds have one drawback: they tend to break from time to time.

In order not to aggravate the situation, before you repair the blinds, you must familiarize yourself with their device. All blinds, depending on their design, are divided into two main types: vertical and horizontal. The main difference between the two designs is the vertical or horizontal arrangement of the adjustable sash panels.

If you are not sure of your technical skills, before you fix the blinds, record the location of parts and accessories in all details on the phone camera. It will also be useful to record each stage of the repair work on the camera - so you will not have any problems during reassembly.

Due to the different structure and order of the device, the malfunctions of these two varieties are also different. Therefore, repairing horizontal blinds will be different from repairing vertical blinds.

Horizontal structures are strong enough, and with careful use they can serve you for ten years without a single breakdown. But with careless use or as a result of poor-quality assembly, certain parts may fail. Let's take a closer look at how to repair horizontal blinds. The list of major faults includes:

Video (click to play).

The lamellas (sash) do not rotate around their axis.
Break in the cord.
Breakdown of the lifting and slewing mechanism.
Breakage of the horizontal bar.

If the horizontal slats have ceased to rotate around their axis, then the point is in broken hooks and lower clamps. To replace broken plastic parts, you will have to buy new parts from a specialist store.

In this case, you should pay attention to their size - the purchased parts may differ from their relatives. Therefore, when going to the store, take the broken part with you for a sample.

Replacement is done as follows:

We remove the old hook or retainer.
With one hand we firmly hold the swivel mechanism, preventing it from rotating, and with the other, we insert a new hook into the corresponding hole.
We insert a vertical cane into the installed hook.

The lower retainer is replaced in the same way. After this procedure, the lamellas will begin to rotate around their axis, regulating the flow of light.

If the cord breaks, it should be replaced with a new one. Before buying a new lace, you should remove the dimensions of the blind structure. Knowing these dimensions, the sales assistant will be able to choose the lace length you need. To work you will need scissors, a needle and tweezers. The procedure for replacing the cord will look like this:

We remove the remnants of the old torn cord.
We pass the new cord through the lifting mechanism so that it passes between the iron cylinder and the plastic roller.
We pass the cord into the lower hole of the plastic basket at the point where the ladder is attached.At the same time, the lace is also threaded between the ladder.
We pass the second piece of cord, just like the first. We just pass it into the near punching of the horizontal lamellas.
Next, take a large needle and insert the cord into it. Using a needle, thread the lace through the holes in the lamellas, bypassing the ladder from the right, then the left. Thus, the cord wraps around the ladder in the form of a snake.
At the bottom of the blinds, we pass the needle with the cord through the plug and tie it to a knot. We perform a similar operation with the second cord.

If the blinds do not want to work in the desired mode, then perhaps the whole problem is in the breakdown of the lifting and turning mechanism. Before taking on this work, you need to soberly assess your capabilities: can you fix horizontal blinds with your own hands? The fact is that replacing the lifting-and-turning mechanism is a rather difficult task. First of all, you need to remember the location of all structural parts, after which we proceed directly to replacing the damaged mechanism.

First of all, remove the plugs from the sides of the cornice.
We unclench the edges of the cornice and with the help of pliers we pull out the shaft on which the rotation mechanism is fixed.
Disconnect the shaft and swing mechanism.
We take out the cord from the lifting and turning mechanism, having untied its lower ends.
We insert the ends of the lace into the new mechanism, passing them between the roller and the cylinder.
We attach the new swivel mechanism to the shaft and assemble the structure in the reverse order.

This procedure should be carried out strictly in the suggested sequence, since an incorrect procedure can lead to damage.

Very often, under mechanical stress, horizontal strips - lamellas - suffer. At the same time, it is almost impossible to repair damaged strips - it is completely inappropriate to straighten them. It is easier to replace the bent lamellas with new ones. This process is carried out as follows:

We squeeze out the plugs from the bottom of the strip, untie and remove the cord.
We remove bent or broken planks, replacing them with new ones.
We pass the cord into the corresponding holes of the new lamellas, the lower bar and the plug.
The ends of the cord are tied in a knot and the plug is inserted back into the bottom bar.

As you can see, it is not so difficult to repair horizontal blinds - you just need to show enough diligence and ingenuity. For information on how to repair horizontal blinds yourself, see this video:

Repairing vertical blinds is somewhat different from repairing horizontal structures. The most common failures of this system:

break in the connecting chain;
open control chain;
replacement of the hanger;
break in the cord.

In order to repair vertical blinds, in which the chain connecting the lamellas has broken, the old chain must be removed. Then a whole chain is mounted in its place, to which the vertical petals of the lamellas are attached.

Replacing the control chain will require a fairly large investment of time and effort. First of all, you need to remove the side cover and dismantle the plastic gear on which the chain is wound. After removing a piece of the old chain from the gear, we put a new one on it. Place the gear in its original place and close the side cover.

A common problem with vertical structures is plastic breakage. The most vulnerable part is the shoulder of the lamella. The shoulder is a plastic plate with which the vertical petal is attached to the cornice. It is not difficult to replace it - the shoulder is attached to the fabric lamella by means of an ordinary fishing line or thread. To the plastic lamella, the shoulder is attached to the nibs with a composition. But there is a nuance here - the width of the lamella, which means that the hanger for different blinds can be of different sizes.

Before buying a new spare part, measure the size of the lamella.

The control cord is rarely torn. But even if this misfortune befell you, it is not so difficult to fix it.You need to purchase a new cord of the required length from the store. You can find out by making small measurements. Take the width of the blind and multiply it by two. To the resulting product, we add the height of the structure, multiplied by 1.5. As a result, we get the required length of the cord. How to replace the control mechanism on the blinds, see this video:

To install a new lace, we pass its two ends through the side cover of the cornice. Then we pass the lace through the runners to which the slats are attached. Further, one end of the cord is fastened in the latch, and the other is passed through a special roller located at the end opposite from the control mechanism. Image - DIY roller blinds repair

This is just a small part of the many possible malfunctions and breakdowns of blinds. But, using simple tools and ingenuity, it is quite possible to fix any malfunction at home. At the same time, do-it-yourself repairs can be in no way inferior to repairs made in a professional workshop.

Vertical blinds are a simple device consisting of the following parts: cornice, connecting and turning chains, control cord, slats, "shoulders", lower weights. If you wish, you can fix some malfunctions that arise during the use of these curtains with your own hands.

The design of the blinds is simple, however, during operation, several common breakdowns of device parts occur:

breaking the chain connecting the lamellas;
a break in the cord moving the strips along the eaves;
damage to the "shoulders" (plastic parts located in the upper part of the curtain structure and connecting the fabric with the cornice);
breakage of the runners on which the lamellae are attached.

A very significant advantage of the product is the simplicity of the mechanism and the availability of spare parts presented by manufacturers in the markets and in stores, the ability to disassemble it independently.

You can repair the curtains with your own hands, the main thing is to carefully disassemble the product, and then assemble it, adhering to all stages.

Quite often, the integrity of the chain is violated (with careless handling of the product), connecting the lamellas at the bottom. You can buy a new part from a specialist store.

The length of the chain is determined: the width of one strip is measured and the total number of elements is calculated;
The defective part is replaced with a new one.

It is enough to insert the ball into the groove on the lower plastic strip of the lamella

Such a gap does not happen often (as a rule, as a result of sudden movements). The main requirement for this type of DIY repair is that the runners should be open.

The length of the lamellas is measured to determine the required parameter of the new chain;
The blinds must be disassembled - remove the side cover on the cornice and take out the plastic gear; Unscrew the lid

Removing the gear

The damaged chain is replaced with a new one;

The gear is put in place and the side cover is put on the cornice.

This element in the design of curtains is quite difficult to spoil. A common phenomenon is a decrease in the quality of the cord and, as a result, a part jumping out of the control mechanism.

The parameters of the blinds are measured: height and width. Using these figures, the professional at the point of sale will calculate the required length of the new cord. If you wish, you can independently determine the size of the part: the height of the blinds is added to the double width of the cornice, multiplied by a factor of 1.5;
The ends of the new cord are sequentially passed through the side cover on the cornice and runners;
One end is secured in the fixing device and the other is pulled through a roller (located in the side cover on the opposite side of the eaves). The cord is returned to the retainer and secured in a loop. A special tool is screwed on from the top.

The failure of this element can be corrected with your own hands quite simply.A new part of the corresponding size (according to the width of the lamella) is purchased at the hardware store.

The broken "shoulder" is carefully removed from the canvas.
The whole piece is inserted into the lamella.

Replacing the lamella hanger

Repairing such a violation requires attention and dexterity. It is necessary to carefully disassemble the mechanism and assemble it in the same sequence.

Eliminate the cord;
Disassemble the control device - unscrew and carefully remove from the cornice;
All sliders are carefully pulled out and released from the cord;
The damaged element is highlighted and, compressing the distance from both sides, pull it out of the broken slider;
A distance is inserted into the new slider until it clicks and is fixed in place of the damaged element;
A cord is threaded;
The runners are gently inserted into the cornice;
The control mechanism is installed.

In addition to the standard care of the structure (as for any curtains, they require dry cleaning or wiping of fine dirt with wet wipes), it is necessary to follow the basic rules of careful handling of the product and then no repair of vertical blinds is required.

if the lamella traveller is jammed or the strips do not unfold, do not use force. In the absence of an apparent cause of the malfunction, it is better not to disassemble the mechanism with your own hands, but to seek help from specialists;
requirements for operation - slats can be moved along the eaves only in a position perpendicular to the window;
due to the fact that the mechanism is equipped with plastic components, better control - smooth, free movements;
since the fabric of these curtains loses color over time, then when replacing one canvas, it is advisable to update several neighboring ones, so that the shade of the new element does not catch the eye too much.

Do not rush to write off damaged blinds, it is advisable to first consult with professionals. If, nevertheless, the mechanism of your curtains is damaged, you should get rid of such blinds, or disassemble them into parts.

By clicking on the link, you can find out in detail the reasons for the write-off of your lifting device.

It may happen that it will be cheaper to repair the curtains than installing a new product, even if there is damage to various elements.

Any blinds consist of a large number of parts and it is quite natural that some of them periodically fail. Do not rush to throw away the entire structure, because most often it is enough to replace just one broken part. And for this it is not at all necessary to contact specialists. Try to repair vertical blinds yourself. You will need desire, a little creativity, and a minimum of experience with basic tools. And you can always buy all the necessary parts in a specialized store.

Before starting to study the repair instructions, let's remember what elements the vertical blinds consist of:

Carrying and decorative cornices;
Runners, to which the lamellas are attached;
Lamella holders (hangers) connecting the lamellas with the bearing cornice;
Weights that give weight to the canvases;
A chain connecting the lamellas from below;
Control chain (with its help the lamellas rotate around the axis);
Control cord (moves and spreads the lamellas) with a plastic tensioner;
Lamels.

The most common breakdowns are:

break of the chain connecting the lamellas from below;
breakage of the adjusting cord;
breakage of the runners on which the slats are held;
breakage of the "shoulder";
loss of the presentable appearance of one or more lamellas.

None of these breakdowns are critical, and you can fix them yourself. How to fix vertical blinds with fabric slats, we will analyze step by step below.

The lower chain consists of small plastic balls through which the fishing line is threaded. If handled carelessly, it breaks quite often, but it will also be difficult to replace it with a new one.

The procedure is as follows:

We purchase a new part in a specialized store, having previously calculated its length. To do this, you need to measure the width of one lamella and multiply it by their total number.
Then, without removing the blinds from the eaves, remove the damaged chain and insert a new one in its place.

When replacing the connecting chain, the balls are inserted into the grooves on the weight plates

The construction of the control chain is the same as that of the lower connecting chain. If you pull it sharply, sooner or later it will inevitably break. Replacing the control chain will also not be difficult, but one condition must be met: before disassembling the sliders for replacement, they must be set to the open position. Then:

Determine the length of the new chain. It is equal to the length of the lamellas.
We unscrew the side cover on the cornice and take out the plastic gear.
We remove the damaged chain and insert a new one in its place.
We return the gear to its place.
We put the side cover on the cornice and check how each lamella turns.

The control chain is closed in a circle with a special plastic lock

The control cord is, in general, just a rope on which the movement of the lamellas along the eaves depends. And like any rope, it is not immune to a burst. But this rarely happens, most often the quality of the control cord fixation deteriorates and it does not stay in place. To replace and align a torn control cord, the following steps must be taken before removing the louver for repair:

We measure the eaves of vertical blinds in width and height of the lamellas. This data will allow you to calculate the required length of the new cord. The calculation is performed as follows: the width of the cornice is multiplied by 2, the height of the lamellas is multiplied by 1.5, and the resulting values are added.
Remove the tensioner from the old rope and attach it to the new rope.
We pass the ends of the new control cord one by one through the holes in the side cover of the cornice, and then through each slider.
Then we fix the first end in the fixing device, and pass the second through the roller from the opposite side of the cornice, return it to the fixing device, fix it in the form of a loop and twist it from above with any suitable tool.

The tensioner keeps the control cord upright

This repair is the most time consuming. First of all, it is necessary to purchase new runners and the so-called connecting distances that serve for their fastening.

When removing a broken slider, you must be careful, since you will have to disassemble the mechanism and reassemble it in strictly reverse order.

The procedure is as follows:

Dismantle the control cord (otherwise it will interfere with the work process).
Unscrew the control mechanism and carefully remove it from the cornice.
We carefully remove all the runners.
We take the broken element, squeeze the distance on both sides and remove it from the damaged slider.
We insert the distance into the new slider until it clicks.
We pass the control cord through all the sliders.
We insert the runners into the cornice, stringing them one by one onto the shaft.
We fasten the control mechanism. It is advisable to do this together: one person holds the cornice, the second screws the mechanism.
We return the control cord to its place.

This is how the runners for vertical blinds look (on the left, the slider with a distance inserted into it)

In the process of replacing the shoulder, no problems should arise. This is done quite simply:

Before repairing the shoulder, we acquire a new part corresponding to the width of the lamella.
We carefully take out the broken shoulder from the canvas.
We put the new part in the place of the old one.

In the production of blinds, lamellar holders are either sewn into the canvas using a fishing line, or simply inserted. To get a broken shoulder, in the first case, you will have to first cut the line.

It looks like a lamellar holder or "shoulder"

In some cases, new blinds are larger than the window. Therefore, it becomes necessary to shorten them in length and width.

For this we need the following tools:

crosshead screwdriver;
ruler and tape measure;
painting knife;
sharp scissors;
lighter or matches;
iron;
pencil.

Since weights are fixed at the bottom of the lamellas, it is more convenient to shorten the blinds in length from above. The sequence of actions is as follows:

Before shortening the vertical blinds, remove them from the window along with the cornice and lay them on the floor. We start work from the top from the side with a lifting mechanism.
Carefully pry off the side cover of the cornice with a painting knife, remove it and unscrew the fixing screws.
We remove the runners from the slats of the vertical blinds and the cornice. You need to work with them carefully, without excessive effort. Otherwise, the not too strong plastic can be damaged.
We measure the length of the curtains and determine how many centimeters they need to be cut. When assembled on the cornice, no more than 1-2 cm should remain from the bottom edge of the blinds to the floor. You should also take into account 2-3 cm for tucking.
We cut all strips with scissors or a clerical knife to the required length. So that the lamellas do not fray at the cut points, the cut edges must be melted on fire using matches or a lighter.
Tuck the edges of the lamellas. Fix the folds with an iron.
In the center of the folds with a painting knife we make holes for the ears.
We insert the strips with ears into the lamellas.
We collect the blinds and fix them over the window.

It should be understood that the above instructions are only suitable for fabric slats. To shorten vertical blinds, the lamellas of which are made of aluminum, plastic or bamboo, you will have to contact a specialist.

In order to reduce the width of the blinds, first of all, you will have to shorten the cornice. For this we need a hacksaw for metal. The procedure is as follows:

Remove the side eaves cover.
With a hacksaw, we saw off the eaves to the desired width.
We remove the extra slats.
We return the side cover to its place.

Sometimes one or several lamellas lose their presentable appearance: they are torn, covered with spots that cannot be cleaned, so there is no need to throw away extra lamellas. They will be useful to you as a replacement. In addition, if necessary, new lamellas can be purchased individually from a specialized store or workshop, just like all other parts.

There are many reasons why the blinds fail, but if you follow their operating rules and even check the quality of the components when buying, the repair will not take a very long time. Of course, it is not necessary to repair them yourself, but keep in mind that some experts exaggerate the complexity of the problem. Therefore, try to make purchases from trusted manufacturers who give a guarantee for all parts and the structure as a whole, and repair the blinds with your own hands only when their guaranteed service life expires.

Blinds are one of the best options for replacing curtains. The design perfectly copes with the penetration of unnecessarily annoying sunlight, has many other positive qualities and, with proper care, can last for many years. But sometimes even such a strong and durable thing breaks. What causes structural breakdowns most often, is it possible to repair the blinds with your own hands and can they be repaired?

Vertical structures are found in houses much less often than horizontal ones, but they are also popular, since they have all the positive properties of blinds. Here are the most common breakdowns.

Break in the connecting chain.
Breaking the chain with which the blinds are regulated.
Breakage of the connection between the lamella and the cornice.
Breakage of runners.
Deformation of the control cord.

You can deal with all these shortcomings on your own, without seeking help from specialists. Below we will tell you exactly how.

Vertical blinds

Do you want something special in your interior? Find out where to buy multi-texture blinds and at what price.

Wooden blinds are also comfortable and suitable for any style. Read our material on the website "Wooden blinds in the interior".

So, if you are thinking of repairing blinds with your own hands, then you need to know how you can fix the breakdowns described above.

If you have a broken chain that holds the lamellas together, then just buy a new one in the store, having previously measured the width of the structure. Then insert the new chain instead of the old one.
If the breakdown is that the control chain is worn out, then you need to open the side cover of the eaves, remove the plastic gear. Remove the broken chain, put a new one on the gear. Put it back in place, close the cover.
A breaking shoulder connecting the slats and the cornice can be repaired in the following way. Measure the lamella size and buy a new item from the store. Remove the broken shoulder and sew a new one onto the thread, or glue it, if provided by the design.
Breakage of sliders is perhaps the most annoying problem that can occur. First, remove the control cord to get to the mechanism without interference. Unscrew the control mechanism and take out the broken slider, pushing back the distances. Set the distance to the new slider, then insert it into the curtain rod, stringing it onto the shaft. Close the mechanism and hang the cord back.

Repair of beggars in vertical blinds

Now you know how to repair vertical blinds if one of the troubles described above occurs and deal with the breakdown with your own hands. And what to do if the elements of horizontal blinds have become unusable?

Horizontal blinds are the most popular type of construction, but, unfortunately, they also break sometimes. And here is what the most frequent breakdowns of blinds look like.

Broken hooks.

The need to replace the lower clips.

Replacing the control cord.

Blinds lifting mechanism repair.

Replacement of strips.

The reasons why these elements fail are not so important - maybe the service life is expiring, or the structure has been damaged by careless movements. It doesn't matter, it's only important to know how to fix blinds qualitatively and quickly replace the destroyed element.Horizontal blindsIf you are the owner of a horizontal type of structure, then you need to know how you can repair horizontal blinds with your own hands if one of the breakdowns described above is found.

If such small elements as hooks or clamps are out of order, then you need to buy new missing elements, remove the old ones and fix the new ones.

If the cord is torn, then go to the store for a new one, after having measured your blinds. Remove the old cord, thread the new one in its place, through the cylinder and rollers. Pass the rope through the ladder attachment.

Replacing the lift-and-turn mechanism

Now the question of how to repair the blinds does not cause any difficulties for you and, if necessary, you can repair it yourself.

How to install horizontal blinds, read the instructions for installing horizontal blinds on a window on our website.

What materials are horizontal blinds made of, read our article "Horizontal blinds from different materials: which are better?"

Roller blinds stand out a bit on this list. Do-it-yourself repair of roller blinds is possible, but if the canvas itself is damaged, then there is nothing left to do but change it completely or, more preferably, buy a new structure.

If the curtain does not fit tightly to the window, then it is necessary to check the installation of the guides and the presence of a load in the lower part of the structure. When the curtain is poorly fixed to the frame, it is best to replace the mount, choosing the one that is most suitable for you. If the control cord breaks, it must be removed and replaced with a new one.Do not tie the torn cord!

Roller blinds repair: creampie replacement

In general, repairing blinds with your own hands does not cause any particular difficulties, and if you have minimal skills, you can deal with breakdowns yourself. You can always find many videos on the Internet that demonstrate the main faults and how to fix them.

High-quality blinds, with proper care and handling, will serve a very long time. However, blinds, like any other product, can experience various kinds of breakdowns during use. If your blinds also have any trouble, assess the degree of the malfunction and consider the possibility of repair work. You can deal with the solution of a number of minor problems with your own hands. By the way, you can read about the installation of blinds on our website.Do-it-yourself blinds repairContents of step-by-step instructions:There are a number of the most popular breakdowns that you can fix yourself. Image - DIY roller blinds repair

General view and arrangement of vertical blinds

One of the most common breakdowns is the breakage of the chain, through which the louvers are connected.

For repairs, buy a new chain from a specialized dealer and insert it in place of the old part. Pre-count the number of vertical elements and measure their width. Traditionally, blinds are equipped with 8.9 and 12.7 cm wide slats.

This chain breaks quite rarely, but you need to be prepared for such a situation.

First step. Remove the side eaves cover.

Second step. Remove the plastic gear.

Step three. Put the connected back or a new chain on the gear and insert it into the proper place.

The connecting lock should be located on the side opposite to the hanging gear. The runners, however, must be open.

Fourth step. Put back the eaves cover.

In vertical blinds, a "shoulder" breaks quite often into lamellas. This element connects the fabric to the cornice.

Buy a new "shoulder" in a specialized salon, having previously specified the width of the slats of your blinds.

Remove the damaged product and insert a new one in its place. Usually the "shoulder" is sewn in with a fishing line, but some manufacturers glue the lamellas. Be sure to clarify this point individually.

There are also such blinds in which the "shoulder" can be freely reached and a new product can be installed in its place. If this is not your case, simply carefully cut the line and sew the whole "shoulder" using ordinary thread.

This cord is rarely torn. Much more often, the quality of its fixation simply deteriorates, as a result of which the cord is pulled out of its place.

Before heading out to the salon for a new cord, measure the height and width of your blinds. Based on this data, the specialist will be able to calculate the amount of new cord you need.

You can also do the calculation yourself. To do this, multiply the width of the curtain rod by 2 and add one and a half the height of the blinds to the resulting value. This will calculate the amount of lace required.

Thread the two ends of the new lace first through the side cornice cover and then through the runners. Insert one cord into the fixing element, and pass the other through the roller. You will find it in the side cover, installed opposite to the control mechanism.

Pull the cord back to the retaining element, loop it and twist it from above using a suitable tool (depending on the situation). In the process of screwing, try not to press too hard, otherwise the product may burst.

Repair of runners in vertical blinds

The most time-consuming repair option for vertical blinds.

Buy runners and special connecting distances to attach runners.Select the distances in accordance with the width of the lamellas.

First step. Remove the control cord so that it does not interfere with your work.

Second step. Unscrew the control mechanism.

Step three. Pull out the sliders.

Fourth step. Move the sliders away from the broken element. Squeeze out or unfasten (as appropriate) the distances and remove the damaged slider.

Fifth step. Set the distance to the click in the entire slider, fixing the new element in place of the removed product.

Sixth step. Pull the control lanyard through the sliders.

Seventh step. Insert new runners into the curtain rod by threading them onto the shaft.

Eighth step. Screw on the louver control mechanism. At this stage, it is advisable to enlist the support of one assistant - he will hold the shaft, and you will screw the mechanism. Twist gently, without excessive force, otherwise the mechanism may crack.

Ninth step. Return the control cord to its original position.

These are all major breakdowns that you can fix yourself with your own hands. In the presence of more significant damage, it is better to immediately contact a qualified technician, otherwise you risk completely breaking your vertical blinds.

General view and device of interframe blinds

This section of the manual will be useful for owners of horizontal blinds. Here are some recommendations for fixing the most common problems. Preliminarily assess the scope of the upcoming work and decide whether you can cope with the planned activities on your own, or whether it would be wiser to immediately contact a professional repairman.

Very often, in horizontal blinds, the hooks that take part in the rotation of the lamellas, as well as the lower clamps, break.

To solve this problem, you need, first of all, to buy out-of-order spare parts in a specialized store and replace them. Make sure the new clips are the same as the clips on your blinds (they can be small or large).

Remove the old hook and then simply replace it with a new product. To do this, insert a new hook into the hole in the swivel mechanism. Hold the swivel mechanism with one hand to prevent it from rotating while inserting the hook with the other. Then insert the cane into the new hook.

To replace the lower blinds, unscrew the broken products and screw the new fasteners in their place.

Replacing the cord in the horizontal blinds

Buy a new cord to fit your blinds. Pre-measure the height and width of the structure. You tell these parameters to the consultant of the specialized store, and he will calculate the required amount of cord.

First step. Remove any remnants of the old lace if present.

Second step. Thread the new string through the lifting mechanism so that the string is between the cylinder and the roller.

Step three. Pass the rope through the bottom of the plastic basket where the ladder is attached. At the same time, the rope must be passed between the ladder.

Fourth step. Pull the rope up to the basket, while pulling it down the bottom and running it into the space between the ladders into the eaves hole.

Fifth step. Stretch the second rope by analogy with the first, but in this case it must be launched into the nearest punching of the lamellas.

Sixth step. Thread the string through the needle and alternately pull it through the slats through the right and left ladders.

Seventh step. Through the bottom of the blinds, thread the needle and rope through the ladder plug and tie the cord into a strong double knot. Do the same with the other end of the rope.

If possible, pull a new lace through the slats with the blinds in normal condition, that is, it is better that they hang on the window during this repair.

Replacing the lift-and-turn mechanism

Before starting the repair, remember in what order the parts of the mechanism are placed, so that later nothing will be confused during the reassembly process.You can even take pictures of everything - this will make it easier for you to navigate.

First step. Remove the side plugs from the curtain rod of the louver, and then remove the shaft from the swing mechanism. The shaft can be made of plastic or metal.

Second step. Unclench the edges of the curtain rod and dismantle the mechanisms for the subsequent installation of new elements.

Step three. Remove the mechanisms from the grooves.

If repairing the hoist, pull out the rope. Untie the hanging ends of the lace (usually they are tied in a knot) or cut (they can also be a single piece). Solder the ends of the rope with a lighter.

Fourth step. Insert the ends of the lace between the rollers of the new mechanism.

Fifth step. Sink both ropes into the grooves. In this case, it is important to make sure that the ropes do not intertwine in the curtain of the blinds.

Sixth step. Connect the mechanisms back. Place the swivel mechanism closer to the center of the cornice, while the two antennae should rest against the back edge of the cornice. The lifting mechanism must be placed deep into the cornice, so that the laces in the slots also "look" deep into.

Seventh step. Place the connected gears on the cornice. Straighten the ends of the cornice to its original position. When performing this operation, make sure that the hole in the installed mechanism coincides with the shaft. Otherwise, the shaft may simply not go through.

Eighth step. Put back the side covers.

This completes the replacement of the cord.

Thus, you can easily cope with the correction of simple breakdowns of vertical and horizontal blinds with your own hands. However, if you see that the damage is quite serious (not included in the list of problems discussed above), and the blinds are very expensive, it is better to immediately contact the services of a professional repairman. Otherwise, follow the instructions and everything will work out.

Animals often disable blinds

It is extremely rare, but sometimes the horizontal bar still breaks, which serves as the base for the entire structure of the blinds. It is impossible to properly repair this product - all "patches" fail very quickly.

Therefore, the only correct solution to this problem will be a complete replacement of the mentioned element. The knowledge gained in the previous sections of the instruction will help you with this.

First of all, buy or order a new plank in the correct size from your specialist retailer. Next, you need to dismantle all structural elements from the broken crossbar. Remove ropes, slats, internal controls and other components.

Remember, or even better, take a picture of the order in which you perform disassembly in order to successfully reassemble the blinds in the future.

Try on a new plank in place of the old one. Make sure the dimensions are correct and proceed to reassemble the louver. Install and secure all structural elements in the reverse order of disassembly. Check that the system is functioning correctly at each step. When removing and reassembling elements, use the instructions given earlier.

Video (click to play).