Do-it-yourself machine umbrella repair scheme

In detail: do-it-yourself machine umbrella repair scheme from a real master for the site my.housecope.com.

The umbrella serves as an indispensable accessory in rainy weather, protecting from the currents of water and wind. If after another bad weather it has lost its attractiveness or one of its main parts has broken, do not despair and do not rush to throw it away. It can always be fixed! Before repairing an umbrella, study its device, determine whether it is possible to repair a faulty spare part. Sometimes, for automatic constructions, you may need the help of a specialist.

There are varieties of designs and differences between folding mechanisms from each other. The most important part of any umbrella is the canopy, which consists of a metal frame or plastic knitting needles, on which fabric is stretched and a one-piece or foldable handle. Each model can be equipped with a simple or automatic movement. All umbrellas are conventionally divided into:

  • canes - have an enlarged dome made of dense fabric, a sturdy handle;
  • folding - structures have a telescopic device, can be folded - reduced in size (from two to five times).

Depending on the opening mechanism, there is a division into the following types:

  • mechanical - open and close by hand, there are no buttons on the handle;
  • semi-automatic - they are opened manually, the automatic mechanism closes the dome when the button is pressed, and the handle rod is folded by hand by hand;
  • automatic - the button opens the dome, but you need to close it with the effort of your hand;
  • full automatic - a button is used to open and close, no effort is needed.

Image - Do-it-yourself machine umbrella repair scheme

Image - Do-it-yourself machine umbrella repair scheme

The designs differ from model to model, but there are basic details for all umbrellas. Main elements:

Video (click to play).
  • fabric stretched over the frame;
  • a rod consisting of telescopic tube parts;
  • handle, with or without button;
  • lower spoke supports;
  • upper supports, to which the main dome is fixed;
  • springs (thick short and thin long);
  • a wheel is built into the upper part of the plastic tube (holder) that fixes the lower supports.

The most common malfunction is when automatic umbrellas lose their rigidity. This happens when the wind turns them inside out, arching the thin spokes. It is important to periodically check the knitting points and, if necessary, reinforce the weakened fabric. For all umbrellas, there is a single rule: the fewer connections on the rod and knitting needles, the less often the structure breaks.

Whatever the expensive and high-quality umbrella, it cannot be insured against breakage. Before you throw your old one away and buy a new one, try to get your umbrella repaired. If you have a second - unnecessary copy - then it can become a source of scrap materials for restoration. Urgent repair of umbrellas, if necessary, can be carried out by professional craftsmen in specialized modern institutions like the House of Life.

The following components are subject to replacement and repair:

  • telescopic rod or base of a cane;
  • knitting needles from various materials;
  • pen any configuration;
  • dome material;
  • safety needle tips;
  • center cap;
  • buttons.

Prepare the required materials and tools, depending on the cause of the malfunction. This can be a finished part from an old umbrella, round nose pliers, wire, or a tool for soldering metal parts. At home, you can repair the automatic umbrella with your own hands, fix the following breakdowns:

  • damaged tissue at the seam;
  • flying off the tip of the spoke;
  • bent and broken knitting needles;
  • faulty retainer.

To join the seam on the dome, select the threads of the appropriate color: you should carefully, manually, sew the fabric. If the material comes off the end of the knitting needle, then wrap the edge with a thin fishing line and fix it with a knot. Pass the ends of the fishing line into the hole of the knitting needle and fasten it with several knots. This procedure is performed with a free arrangement of tissue on the frame.

How to repair an umbrella if the spokes are damaged? Follow the step by step instructions:

  • First, you need to detach the fabric from the frame of the product, remembering the location of the material.
  • Next, you need to straighten the damaged knitting needles. If the part is unusable, it must be replaced. Use a soldering iron to staple or wire the metal parts of the knitting needle (you can use a piece of paper clip).
  • Upon completion of the work, secure the material with a fishing line to the frame.

If the umbrella does not hold open, try repairing the product yourself. Such damage is easily eliminated if the latch is bent. To do this, press the ledge and sharply move the part to the side. This pulls out the tab of the retainer and gently straightens it. Install it back in the same way. Please note: if the spare parts for the umbrellas are of poor quality, then such repairs will not last long. In this case, you just need to replace the damaged part. It can be taken out of an old umbrella and inserted into the handle.

Repairing an automatic umbrella is a little more difficult than a mechanical one, and it takes more time. Sometimes the breakdown is associated with improper use of the product, then the parts are severely deformed and they can only be replaced with new ones. If the machine itself is faulty, it is better to contact the craftsmen in specialized institutions where umbrellas are repaired. This process is carried out in a short time.

Repair of damaged products of any complexity is carried out by specialized workshops or shops, which provide for the repair of shoes and clothes. In large cities, such as Moscow, St. Petersburg, there are service centers that provide high-quality repair of umbrellas. Small towns also have centers where the service will cost even less. Pay attention to advertisements on the Internet, in newspapers, read reviews, customer recommendations, compare prices.

The more complex the mechanism, the more nodes and elements in it that can fail. The automatic umbrella is no exception in this regard. During long-term operation, repeated opening / closing, the product starts to work incorrectly, and sometimes even becomes unusable.

Button breakage, or rather its jamming, is one of the most frequent problems faced by the owners of automatic umbrellas.

At the same time, many believe that a broken umbrella cannot be repaired, so they buy a new one.

In fact, almost any umbrella (unless, of course, it is a cheap one-time copy for 300 rubles) is repairable. Moreover, in order to fix it, you do not need to go to the workshop - most of the problems can be easily eliminated with your own hands.

If you have jammed and the button on the umbrella is not pressed, this article will help you solve the problem at no extra cost.

Before proceeding with the repair of the button, it will not be superfluous to familiarize yourself with the device and the principle of operation of the automatic umbrella.

Image - Do-it-yourself machine umbrella repair scheme

Any automatic umbrella consists of several main parts:

  • handles with a button;
  • a telescopic rod consisting of several sliding tubes;
  • supports for fastening spokes - upper and lower;
  • folding frame of the dome, which consists of spokes and synthetic waterproof material.
  1. Pressing the button located on the handle activates the spring mechanism for opening the dome, which is located in the rod. This mechanism opens the canopy of the umbrella.
  2. In the case of an automatic umbrella, the canopy can also be closed by pressing the button once.After the dome is folded, you need to take the automatic umbrella by the handle with one hand, and by the upper spoke support with the other, and fix the umbrella in the mechanism.
Read also:  DIY repair of fuel pump 601 engine

To understand in more detail the device and the principle of operation of the automatic umbrella, the video will help:

In most cases umbrella button not working due to jamming of the internal mechanism. This happens most often due to inaccurate use of the product or because of its poor quality.

Image - Do-it-yourself machine umbrella repair scheme

Image - Do-it-yourself machine umbrella repair scheme

Image - Do-it-yourself machine umbrella repair scheme

To force the button to open and close the umbrella dome again, follow these steps:

  1. Remove the lower part of the handle. To do this, use a Phillips screwdriver - she needs to unscrew the screw that secures the handle to the telescopic rod;
  2. Remove the upper part of the handle with the button;
  3. We extract the button;
  4. Using pliers, slightly squeeze the button pusher, slightly lengthening it;
  5. Putting everything together in reverse order.

The process of repairing the automatic umbrella button is shown more clearly in the video:

VIDEO INSTRUCTION