Roman blinds DIY repair

In detail: do-it-yourself roman blinds repair from a real master for the site my.housecope.com.

Roman shades are very convenient for use in the kitchen. They perfectly protect the room and kitchen furniture from direct sunlight, create a pleasant twilight even on the sunniest day. Sewing such curtains is not very difficult. Even a beginner can handle sewing.

It is very important to adhere to the sewing instructions and then you will succeed. Look at the detailed diagram - it will help you in tailoring the product.

1. Measure the length and width of the window opening. Add additional centimeters to the result obtained, they are necessary for processing the side seams. This is 5 cm from each side and approximately 12 cm from the bottom and top of the curtain. In order to calculate the dimensions as competently and accurately as possible and calculate the number of folds, you should use a table that contains the data: window height - number of folds - distance between folds. Imagine that the length of the window has a value in the range of 145-220 cm. This means that with such a length of the window the number of strips will be 7. If the length of the window is still greater than the proposed dimensions, the number of folds will increase to 8. Thus, this the table will allow you to determine the size of future curtains as accurately as possible.

2. Mark the boundaries. This must be done only after the dimensions of the fabric are determined. Next, mark the lines on the seamy side of the fabric. This will be the place for the folds. Crayons or dry soap residues will help you with this. Here also mark the places for the intended rings. This step should be done with a high degree of accuracy. The marking of the seams, and, consequently, their processing will be more accurate if the fabric is first ironed out. If it so happens that the fabric you have chosen has a width smaller than the width of the window, then you can sew several fabrics.

Video (click to play).

3. Finish the side edges after measurements have been taken. This must be done in a standard way.

4. Secure the top bar. To fix the bar on which the curtain will be held, it is necessary to nail the adhesive tape onto the wooden base with the help of small nails. In addition to nails, a construction or furniture stapler will do an excellent job. An important step is when you need to attach another sticky tape to the top of the fabric. This will help in the future, without much difficulty, remove the window decor element at any time.

5. Sew the lower part of the fabric so that a heavy plank can easily pass through the folded opening. Treat the upper part of the canvas in the same way if you plan to use an ordinary cornice. The first seam should be made 1 cm from the edge.

6. Sew the hem from the wrong side of the fabric. You will end up with the so-called "pockets". If this is done correctly, the wooden planks will slide into these pockets with little effort. For the drapery to be beautiful, the folds must be identical in size. Divide the length of the fabric by the number of pleats you want. The resulting distance is centimeters through which the gaps for the rails will be sewn. For pockets, you can use thick ribbons, wide braids, or even fabric folded several times.

7. Sew on the rings. This must be done manually. Nail the rings to the wooden plank. The most successful curtains are considered, where the rings are located symmetrically relative to the middle at a distance of 5 cm from each other.

8. Lock the curtains. To do this, connect the sticky parts and attach the fastening piece to the window. Pass the cord through the rings, moving from bottom to top.In this case, the cord on the lower ring should be tightly tied. You can also saturate the end of the cord with glue, then tie a knot and secure it tightly to the bottom ring. This step will prevent it from loosening during operation and will securely fix the entire product.

9... Pass the cord through the top row of rings. After the cord reaches the very top, repeat this step with all existing rings. Ideally, there will be three ropes on one side. Pull them off. The folds on the fabric should be even across the entire width, distribute them if necessary. If all operations have been carried out, use tapes and straps to fix the resulting folds.

10. Attach the plank to the window frame using the fasteners. Remove retaining tapes or braid. When the curtains come down, line them up and tie the cords in a knot.

11. Feed the cords through the handle to raise the fabric. Tighten another knot. The distance between them should not be less than 45 centimeters. Cut the end of the cord that remains below the second knot.

Watch a detailed video of a master class on sewing Roman curtains at home. Sewing them with your own hands is easy. A share of imagination, a little time, basic skills of working on a sewing machine, the availability of supplies and materials - and your curtain is ready. Create unique interior items.

But on this we do not say goodbye, come back again!

We can safely say that the Roman blind has become one of the most popular window decoration options today. Due to its simplicity and functionality, it simultaneously provides both protection from bright sunlight and gives the interior a cozy and comfortable feeling. Stylistically, Roman blinds are suitable for most solutions from classic to minimalism, they are perfectly combined with straight curtains, with light tulle and even with ordinary blinds.

The device of such curtains is quite simple, a rectangular fabric is taken and weights are sewn into it at regular intervals, which provide uniform folds. On the reverse side, special rings are sewn through which the lifting cords pass, and a Velcro tape (in other words, Velcro) is sewn into the upper part, with which the canvas is attached to the cornice. A weighting agent is sewn into the lower part of the curtain, thanks to which the fabric rises evenly and forms correct folds.

As a rule, the curtain itself does not require repair, with the exception, perhaps, of plastic rings for cords, they come off or break over time. This is due to the fact that they are very hot in the sun, the plastic from which the rings are made becomes brittle and after a while begins to crack. For repairs, it is enough to rip off the old rings and sew new ones to the curtain.

Read also: Tire changer DIY repair

The main problems requiring repair roman blinds, connected with the cornice on which it is installed. Eaves of this type are called lifting and are divided into two types - open and closed. It should be said right away that closed Roman cornices are more reliable and durable. They, in turn, are also manufactured in two versions: a regular curtain rod for light and medium curtains and a reinforced curtain rod for medium and heavy curtains. Open curtain rods are for medium and light curtains only.

The main problems of Roman blinds are the following:

Uneven raising and lowering of the curtain. The reason for such a breakdown is the failure of the lifting block, which will result in entanglement or even breakage of the lifting cord (cord). The repair consists either in bulkheading the eaves and eliminating the cause of tangled cords, or in replacing the lifting unit. Such a nuisance is typical for open cornices, the block itself has a latch design, which can open when the load increases or with a sharp jerk.This is not immediately noticeable and the curtain works as it should for some time, but as soon as the cord stops winding evenly, the skew of the canvas becomes immediately visible. In this situation, people begin to raise and lower the curtain even more in the hope that everything will unravel by itself, but everything turns out exactly the opposite - the cords become even more tangled. In closed eaves, this happens less often and in some cases it is enough to simply untangle the cord.

The fabric does not rise or fall, the control chain scrolls or, on the contrary, does not move. The control mechanism is clearly out of order and needs to be replaced. Likewise, this kind of malfunction is more common on a Roman blind with an open cornice, especially in the case of thick and heavy fabrics. The repair of the Roman cornice will consist in replacing the mechanism, we recommend that you immediately install a reinforced one, even if it will be more expensive, but it will last longer than usual.

The curtain rod control ball chain has broken. Usually, Roman blinds use either plastic or metal control chains. With metal, something rarely happens, but plastic over the years of regular use can break. As a rule, solid-soldered ring chains without a lock are used, in which case the cornice will require disassembly and installation of a new chain in the control mechanism. If a detachable chain with a lock was used, then all the actions are the same, but in addition the chain will need to be fixed in the lock. The simplest case is when the lock has opened, but the chain has not yet fully come out of the cornice, here it will be enough either to snap it into the old lock, or simply replace the chain lock with a new one.

For wide and heavy Roman blinds, we recommend using a single curtain rod with two reinforced controls on both sides. Such a cornice can also be called split if the shaft consists of two pieces, each of which is controlled separately.

From time to time we encounter the so-called lightweight fabric problem. When the curtain fabric is made of a very light, almost transparent tulle fabric, when the curtain is raised, folds may form in the wrong places where it was intended by the design. The tulle begins to gather in arbitrary places, and not from the bottom up. This effect is caused by the fabric "sticking" to the lifting cords due to its insufficient weight. A solution is to install an additional lower weighting agent.

Our company will gladly carry out the repair of a Roman shade, to call the master, just call us on the phone 8 (495) 508-17-20 or send a letter to the mail: with a description of the problem and photos. A repair specialist will contact you and arrange an arrival time!

Read also:
Blinds repair
Repair of horizontal blinds
Repair of vertical blinds
Repair of wooden blinds
Repair of pleats
Repair of blinds with an electric drive
Repair of light filters
Repair of roller blinds
Repair of French and Austrian curtains
Repair of cornices
Repair of eaves with an electric drive
Repair of awnings
Roller shutter repair

Thanks to its unusual appearance and unpretentious care, Roman shades have become quite popular recently.

Installation diagram of roller blinds.

Basically, they are hung on the kitchen windows, since the design of such curtains fits perfectly into the kitchen interior.

Since these are not quite ordinary curtains, but a constructive product with a certain mechanism, then, like any design, Roman shades can break.

Do not rush to immediately use emotions in this case and throw away Roman shades in the heat. Better to have them repaired. Moreover, this must be done in a timely manner, if you do not want to stay for a long time without your favorite curtains in the apartment.

So, if repairs are required, then you can do this: either send the curtains to the workshop and the master will quickly fix the curtains without any problems, or learn how to do it yourself,so that every time you do not overpay money. In addition, if you know how they work, it will not be difficult to do this.

What is the fastest way to understand how Roman blinds are arranged? Of course, try to make them yourself at least once. Or at least imagine all the described technology mentally. Let's try to figure out how they are made and from what.

Sewing and assembling process of Roman blinds

What is used for sewing?

dense fabric;
lining material;
wooden twigs;
small plastic rings (2 rings for each drawstring);
nylon cord.

What is used for assembly and hanging?

a wooden strip, the length of which is equal to the length of the curtains;
hooks with screw legs;
fasteners, screws.

Please note that the width of curtains made in this style cannot be wider than 220 centimeters, otherwise the twigs in the folds will bend. Additional elements that are used to manufacture the product are prepared in advance. This is a round strong cord, Velcro, thin metal or wooden rods (twigs), a rail for fastening the curtain, rings with a diameter of one and a half centimeters and a clip to the cord.

First, the dimensions of the fabric are calculated according to the rules: they carefully measure the length and width of the existing window. 10 centimeters are added to the width of the future product, and 20 centimeters to the planned length. Then they start sewing. Velcro with loops along the entire length is sewn to the front side at the top of the canvas.

Along the entire length of the canvas, the places where the twigs will be placed are marked. They are inserted approximately every 20 centimeters of the length of the curtain. Leave 4 centimeters at the folds of the twigs. There is no margin for the hem below.

Then the fabric is folded right side inward. They are stitching along. Sew on three rings from the seamy side on each fold. Do so that three rows with rings are located along the length of the product parallel to each other.

Diagram of Roman curtains with your own hands.

The second part of the Velcro is nailed gently with small nails to the rail.

Instead of studs, a construction stapler is sometimes used. The product is applied to the mount. Thread the cord through the clip and rings. Then the rods are inserted into the folds.

Using the screws, fasten the holder for the curtain. A self-made Roman blind is hung on it.

To prevent the curtains from falling:

A triple cord is passed through a ring at the bottom of the curtains, which is sewn specifically for this purpose. The cord is fixed with clothing clips. Press down on the latch while lifting the curtain. They are released when they are brought to the desired height. The curtain is thus obtained securely in place.

For a secure fit, curtain hooks are sometimes used, on which the remaining ends of the cord are wound.

Absolutely any fabric is suitable for sewing: both thin and denser. However, it is much easier to work with densely textured material.

It is not advised to purchase material with large ornaments for Roman blinds, since the deformed pattern on the assembled product will look ugly.

A fabric with stripes for such a curtain is perfect. In the open state, the folds formed on the curtains will not create any deformation.

So, knowing how to sew and assemble curtains, repairing them will not cause panic.

The structure of an adjustable mechanism in such a product does not break so often, because it is simple in itself.

Much more often, repairs are required by moving elements that make up the lowering-lifting system and on which the curtain cloth is attached - these are rods or cables. If only the cords are damaged, then replacing such a system is easy. What should be done? Buy in the store the element that needs to be replaced in advance and change it. Failed fixing elements - a lace or a chain can also be replaced with your own hands.

Please note that parts made from unreliable plastic break down more often and will require much more repair, so buy longer-term samples immediately if possible.

Sometimes more serious repairs are required when the breakdowns are of a different nature. If you are not absolutely sure that you will be able to fix them at home, then it is better to seek help from a specialist. The repairs will be made with high quality and much faster: your favorite kitchen curtains can be hung back to where they hung, in a very short time, as if they did not break at all.

And finally: if something is wrong with the Roman shades, do not despair. Try to figure out how they work. Study all the information on this issue. Try to repair it yourself. To do this, you will have to buy broken parts from the store. Do not save on spare parts, it is better to choose durable and reliable ones. If something does not work out, you can always resort to the services of a master. And have a nice renovation!

Roman blinds, which have a special construction and extraordinary design, have gained immense popularity recently.

The unusual look and ease of maintenance have made Roman blinds quite popular today. They are great for complementing the interior of the kitchen, however, by choosing the appropriate model of Roman curtains, it is quite possible to include them in the design of the living room.

Due to the fact that Roman blinds differ from ordinary curtains in a peculiar design with a special mechanism, the rules for their operation may have their own characteristics. And during the service they can break. But this is not a reason to be upset, because they can be repaired with your own hands, the main thing is to do it on time.

There are two ways to fix the curtains: invite a specialist or do it yourself. However, in order not to spend extra money, it is enough to understand the design of Roman blinds and establish the cause of the breakdown.

To understand the device of such curtains, you can try to do it yourself. To create them, they use dense fabric, lining, wooden rods, drawstring rings and nylon cord.

To assemble the curtains and hang them on the window, you will need a curtain-width wooden strip, hooks with screw legs, screws and fasteners. At the same time, it is worth remembering that there are no Roman curtains wider than 220 cm, otherwise the twigs will bend in the folds and create a not very pleasant appearance.

First of all, focusing on the width of the window, prepare the fabric. 20 cm is added to the planned length and Velcro with loops is sewn onto the upper part of the canvas. Further along the length of the canvas, the places where the twigs will be attached are marked. The distance between the rods should be 20 cm. After that, three rings are sewn on the seamy side of each fold, and the second part of the Velcro is nailed to the rail.

The resulting structure is applied to the mount and the cord is threaded through the clamp and rings. Next, the rods are inserted into the folds and the fastener is screwed to the curtain with screws.

Knowing how Roman blinds are made, you can figure out how to repair them. Very often, moving parts need to be repaired. If the cords in the curtains are damaged, they can be replaced with new ones. To do this, you should buy the appropriate cords in the store.