In detail: do-it-yourself outdoor roller shutters on the door from a real master for the site my.housecope.com.
As a rule, roller shutters usually have to be repaired at the most inopportune moment. However, it is impossible to hesitate with this, since a minor malfunction can lead to very serious and costly consequences. If you notice even small changes in the work of your design, then you need to immediately seek help. If you have previously serviced the canvas yourself, then do not postpone the inspection indefinitely.
Each mechanism is designed for a certain period of operation. And this does not mean that you can safely use the structure. It is necessary to periodically service the roller shutters in order to identify problems at the earliest stages. Timely maintenance is also necessary in order to replace worn-out parts on time. After all, there are rollers and silicone seals that wear out faster.
Serious breakdowns can occur if the blade has been operated with increased load. Then its service life is simply reduced. But even in this case, it will be possible to repair the roller shutters. The main thing is not to continue operation if you hear extraneous noise during operation.
Extraneous influences and atmospheric phenomena (temperature changes, severe frosts) can also lead to a malfunction of the device. Self-repair of roller shutters is undesirable in this case, since specialists will better diagnose the causes of the problem and fix them faster.
All faults can be figuratively divided into several groups:
breakdown of the electric motor;
blocking the canvas;
the crossbar lock is out of order;
damage to the box.
Video (click to play).
Failure of the electric motor is the main breakdown of roller shutters. Problems with the power cable, control panel, or switch may contribute to this. Less often, the engine itself or its thermal sensor fails. In this case, the replacement of the broken element is most often required.
If you have returned home and the roller shutters do not open, then in this case it is necessary to call the foremen as soon as possible. Do not try again and again to open it on your own. An on-site specialist will be able to quickly figure out what caused the blockage. This is most often due to faulty guides. The movement also stops if the web is deformed: the lamellas diverge, get stuck in the box. The cause may also be a broken cable or springs.
A high-quality bolt lock cannot fail due to a technical malfunction. Most often, its breakdown will be caused by clogging or ingestion of a foreign object. The cause of a serious breakdown, due to which the roller shutters do not rise, may be damage to the protective box. This happens after a heavy object falls on it or the box elements fail.
Not every type of repair will be within the power of a common man in the street. Most often, a call to the master is necessary so that he at least diagnoses the cause of the breakdown. But there are times when you can carry out work on the repair of roller shutters with your own hands. Very often in the autumn-winter period, after precipitation falls, the temperature drops sharply. As a result, an ice crust may form on the surface of the web. When the canvas is opened, it will interfere with him. To fix this, it is necessary to periodically inspect it and gently tap on the surface so that the ice and snow melt.
You can often observe the skew of the canvas at the bottom. Because of this, it does not fit snugly against the wall.In this case, it is not necessary to immediately replace the roller shutters. It is enough to check the guides, in which dirt can simply accumulate.
If you ever encounter similar problems with roller shutters, then do not postpone the repair. The sooner you find the cause, the sooner you can fix it.
Metal roller shutters are a popular alternative to grilles. They are able to effectively protect your property from criminal encroachments, create a comfortable darkening of the room, protect the room from moisture, dust, light. Roller shutters are easy to use and do not spoil the appearance of the facade, in perfect harmony with it. However, sooner or later, all devices fail and they need to be repaired.
Roller shutters should not be considered an unreliable design: they can last a large number of years with proper care, however, sometimes sudden troubles can happen, and then the owners of the devices have to quickly look for a way out, doing this, as a rule, on the go. Without sufficient experience and knowledge, it is quite difficult to restore the system's operation, however, it can be repaired. To do this, you need to calculate the roller shutters, select materials for repair and replace damaged elements.
If you find some minor breakdown, but the system works, you should not ignore the problem and postpone the repair of the roller shutters for a long time. The fact is that all the details of the mechanism are interconnected, and a minor malfunction will gradually cause a more serious problem, the elimination of which will be much more expensive and take more time. In addition, faults in the protection of windows can threaten the safety of your property, since a broken roller shutter will not be able to function properly, and an intruder will use this to enter the house.
To repair the canvas, it is recommended to contact a company that is professionally engaged in this or specializes in the manufacture and installation of devices. However, depending on your experience and the existing problem, you can perform some operations yourself.
Constructive elements of roller shutters
Blinds are ordered on the inner windows, it is easy to hang them yourself. Read our article "Attaching Blinds to the Ceiling - Basic Methods"
Curtains are still popular nowadays. About this in detail in our article "Popular models of curtains for a small window"
Any mechanism requires careful attention. In addition, there is a natural wear and tear of parts as a result of friction and the effect of physical phenomena on them. A malfunction may appear even if the design has not yet expired. Regular maintenance of the moving parts of the machine will help get rid of potential problems. Prevention is needed regardless of the type and cost of your roller shutters.
Worn parts need to be replaced in a timely manner, without waiting for a failure. Some elements may break or become unusable before the deadline, if the operation was too tough, the roller shutters were used in unsuitable conditions, were not properly maintained, cheap parts of poor quality were purchased.
Most often, seals and rollers wear out, since they are made of silicone, which reacts to mechanical stress that occurs when the structure moves, and also does not tolerate temperature extremes. In fact, this material can be considered consumable, seasonal. If you use a blade with an increased load, the failure of more serious parts can also occur earlier. In this case, it is quite possible to repair the roller shutter with your own hands or contact a specialist.
The impact of atmospheric phenomena also leaves its mark. High and low temperatures and their sharp drops especially affect the operation of mechanisms. Any metals do not like this, frost makes them more fragile.In case of metal fatigue, self-repair does not usually help; the part must be completely replaced. Chips and cracks may appear on it, other evidence of the failure of the elements of the mechanism; they can be easily installed by a specialist.
Before thinking about how to repair roller shutters with your own hands, you need to determine what exactly is out of order. This will help to make competent repairs, avoid unnecessary financial spending and loss of time. The following problems are most common:
Failure of the electric drive.
Jamming of the web.
Destruction of the box.
Broken crossbar lock.
The electric motor is the most vulnerable part of the structure. He is afraid of power surges, he is dependent on a cable that can burn out, switches and remote controls often fail. The engine itself may also be faulty, less often the temperature sensor breaks down. It is necessary to correctly determine which element needs to be repaired. Engine parts, as a rule, change, you can replace a specific part or the entire drive, depending on the feasibility of repair and its cost.
Metal roller shutters installed on windows in the country, as a rule, do not rust, but this can happen with mechanical damage to some parts or constant exposure to moisture on moving parts of the structure. Because of this, jamming of the canvases can also occur, most often this problem arises if the parts of the mechanism were not lubricated in time or it was not used for a long time.
A crossbar lock can be a problem if you purchased a poor quality product. Expensive quality locks rarely let their owners down; most often, the lock breaks if a foreign object somehow gets inside. The web may stop lifting if the protective box is accidentally dented or badly damaged. When it deforms, the lamellas can cling to the box body, which interferes with their normal movement.
Especially for our readers, a review of where to buy or order vertical blinds, examples of the best online stores.
Not all malfunctions can be eliminated without seeking help from qualified specialists, however, some of them are quite within the reach of any cottage owner. A professional may be required to help find the cause of the malfunction, however, the user can solve most of the problems on his own. For this it is important to know the weak points of the roller shutters. For example, the canvas most often suffers in the winter, as a crust of ice can form on it. When trying to open the canvas, the lamellas will not be able to move correctly due to the fact that they are bound by ice. If the drive is powerful, the blade will rise, but the lamellas are deformed and will no longer be able to function normally.
If you live permanently in the house, and you have the opportunity to keep an eye on the roller shutters, it is recommended to regularly tap on them, driving away snow and ice. Not uncommon - the skew of the canvas: this usually happens with its lower part. In this case, the canvas can move away from the wall, form cracks. Most of the time, fixing the problem is easy. The dirt accumulated in the guide is to blame: it just needs to be cleaned. This is quite simple to do: you can use a regular flat screwdriver, with which you can remove dirt from the guide.
