Rotak 40 DIY repair

In detail: rotak 40 DIY repair from a real master for the site my.housecope.com.

Bosch Lawn Mower Rotak 32: models, features of work, repair

Suburban homeowners who have a beautiful lawn that is a stunning façade to create the look of their entire home should definitely have a modern lawnmower at their fingertips. It is needed so that the territory of the site is well-groomed, and the careful appearance of the site will pleasantly amuse the eyes of the owners and guests.

But it is not so easy to achieve a satisfactory result. The site should be completely flat, and the grass should be trimmed as if it were a ruler, regardless of whether it is true or is it a roll substitute. If you have noticed flawless lawns even from afar, then you can appreciate the level of work that needs to be done to achieve such an organization.

Thus, the conclusion is imposed by itself: accuracy is required in the haircut, which can only be achieved with the help of special devices. Today, the number of lawn mower manufacturers is off the charts, but only exceptional brands can guarantee the highest quality! It can be used by the Bosch company, whose ideological inspirer and creator is Robert Bosch.

The company is one of the long-livers, the creation of which dates back to the 19th century. In addition, the entire policy of the company was formed in this gap: “the waste of funds is nothing compared to the waste of trust. Promises are always more important than immediate benefits. " And now, almost two centuries later, the company continues to keep its promises in order to maintain its guaranteed reliability, satisfying customer needs.

Video (click to play).

The main goal of the company until now is the harmonious fusion of technological innovations and a reliable, time-tested system that allows people to make their lives easier, making daily routine cleaning a pleasure.

Products from the manufacturer

For 10 years, the entire range of Bosch products has been adhering to this goal, as stated by the statistics, and most importantly, the very irreplaceable trust with which customers look at the company's products, if there is an alternative option. You can find out about all models of Bosch electronic lawn mowers from this article.

Separately, I would like to say about the section of the company engaged in the development and sale of horticultural products, with a separate representative of which we will now get to know, and specifically the rotary lawn mower Rotak32 (Bosch rotak 32).

This model lawn mowers refers to the level of a rotary battery, and therefore it is worth mentioning the ease of use and exorbitant freedom of movement.

Specifically, the Bosch Rotak model battery-powered lawnmowers have an efficient energy management system, or "Efficient Energy Management".
This system, as the name implies, allows the owner to increase the operating time due to new long-term lithium-ion batteries.
The charge of these batteries is higher than standard, charging is done faster, therefore, the readiness of the mower to work is virtually constant.
In addition, these mowers have an innovative feature - the presence of guides for mowing at the very edge.

Model Bosch Rotak 32

The bosch rotak 32 lawnmower is a striking representative of the electronic rotary lawn mower. This type of apparatus, like the entire Rotak family, is designed and assembled specifically in England. A completely logical question appears, what still distinguishes this model from 10 others? And so: Here, first, it is worth mentioning the box. PowerDriveTM is a lowered belt drive, in the process of which the blade rotates at a speed of 3700 rpm, but the motor is very aggressive and is capable of delivering more revolutions.

This Power Drive system can also be worn out by other trump cards up its sleeve. Here you need to be aware that electric lawn mowers have a knife connected directly to the engine, because cutting the wet grass cover increases the possibility of water getting into the engine, and, accordingly, its breakdown or damage leading to an emergency stop.

See the video for the main advantages of a lawn mower.

The Kamaz 6520 dump truck has impressive technical features and an affordable price tag.

Everything you need to know about the KamAZ 5320 brake system is only here

Mower BOSCH ROTAK 32 — disassembly - assembly. Replacement of the pressure roller.

As expected, two spare parts are more expensive than the latest mowers. One gear is 1200 rubles, and the second is sold, only.

You should not be pushed around by reading the annotation on the operation of the Stihl MS 660 chainsaw. But if you have already thrown out this document, then click here.

Specifically, this allows us to say that repairing a bosch rotak 32 lawn mower is actually not useful.

The advantages of this device:

A distinctive feature of the machine can be called its lightness, because the device is slightly more than 7 kg in weight, and this, in turn, is 30-50% less than rivals of similar power. The Ergoflex system is one hundred percent responsible for this solution, providing the convenience of operation and control of the device in the working position.
The lawn mower is easy to move and transport... In addition, for maximum convenience, the mower is equipped with an additional handle on the body.
It is also worth noting the low noise level of the mower during mowing. This allows the device to be used even in urban environments.
And don't forget the precision mowing that extends right up to the edge of the lawn. This solution of the manufacturer can be called, in some way innovative, due to the fact that the guides allow you to provide a remarkable high-precision result.

You can even say that the lawn mower is electric Bosch Rotak 32 is the perfect solution for your walletbased on the criterion "price / quality". However, if you are not yet ready to purchase this unit, then we suggest taking a look at the rating of the best electric lawn mowers and perhaps it is in it that you will find the very tool that is right for you.

Lightweight, quiet, spacious enough grass collector, which has 31 liters in volume, duration of work, high mowing accuracy, ease of use, compactness and complete freedom of movement. In addition, the Bosch Rotak 32 electric mower is one of the ecological representatives of lawn mowers, as it does not pollute the air.

It is worth highlighting the professional features of the Bosch Rotak lawn mower. Cleanliness and care when mowing the lawn. Due to the presence of high-precision knives in the mower, as well as the possibility of adjusting the mowing height, you can always personalize the tool for optimal mowing of the lawn, regardless of its type. But, if you still want to buy a lawn mower for tall grass and weeds, we advise you to click here and find out about the most popular models of this tool.

Mower advantages

Rotak 32 has a rigid catcher, with the corresponding volume of cultivated area. Bosch takes care of the consumer, thus relieving him of the need for frequent grass unloading. A separate word should be said about the reliability of fixing the grass catcher, which consumers of other brands of lawn mowers often complain about. The manufacturer has foreseen the reliability and ease of attaching the grass catcher to the device. The lawn mower meets all the criteria of environmental friendliness and safety, it is not demanding on maintenance.

Newbie

Registration date: 10.12.2005
Posts: 33
From: Moscow-Kirzhach-Kolchugino

Newbie

Registration: 12/14/2004
Posts: 34
From: Moscow

Newbie

Registration: 8.8.2006
Posts: 56
From: Moscow

When I took an electric mower, I also looked closely at BOSH, but the sellers dissuaded me and advised me to take another, and cheaper. They said that BOSCH ***** has engines, belts are torn, BUT great for very tall grass. I bought MTD myself. Very satisfied.

As the owner of BOSCH, please develop rumors about the engine, belt and tall grass.

Newbie

Registration date: 10.12.2005
Posts: 33
From: Moscow-Kirzhach-Kolchugino

Passerby

Registration: 10.8.2006
Posts: 7
From: Moscow

Newbie

Registration date: 10.12.2005
Posts: 33
From: Moscow-Kirzhach-Kolchugino

Newbie

Registration: 8.8.2006
Posts: 56
From: Moscow

Newbie

Registration date: 10.12.2005
Posts: 33
From: Moscow-Kirzhach-Kolchugino

Summer resident

Registration: 29.5.2006
Posts: 183
From: Moscow

Summer resident

Registration: 1.6.2009
Posts: 668

My Rotak 32, in theory, should not be very different. And the channels below are all clean? I looked several times, there was never anything like it, it was somehow cleaning itself inside. There were some dried blades of grass, and that was all. Below, just above the knife - yes, it sticks, you need to clean it off.

Another observation - as I mow wet grass, in the lowland - deposits stick, and as I mow dry, but under the birches - everything itself is already cleared, probably from chopping branches, blowing the grass with pieces of wood.

The belt is there, but no complaints about it. Theoretically, a belt drive is better in that the load from stopping, jamming the knife does not immediately apply to the engine, it does not spoil it so much. Truth be told, I don’t remember my knife stuck.

There are no problems with the stable 220.

There was a malfunction - from mowing the grass along the edge of the path sprinkled with sand - dust was sucked in, it got into the upper main bearing, it squeaked terribly and began to spin with effort. I replaced it with a two-row one bought at a car shop without any problems.

High grass mows "with a bang." The knife sharpened on emery - indeed, it became better. Unless he sharpened only the tips, and not the entire surface to the axis.

Post has been edited Sergejs – 5.7.2010, 16:47

Repair of lawn mowers is carried out taking into account the principle of operation and the cause of the breakdown of the unit. Most often, the device fails in 3-4 years after active use.

Repair of lawn mowers is necessary in the following cases:

the device will not start;
the unit quickly stalls after starting;
the motor is not running at full power.

Reasons for failure of lawn mowers:

In the first case, you will need to replace the body, handles, knives and wheels for lawn mowers. When the blades are blocked, the machine stops mechanically. Such a breakdown is associated with an attempt to mow hard or tall grass. Repairing the mower consists in freeing the cylinder from the stuck grass and rolling it in the other direction.

When operating the mower with a blunt or damaged blade, the grass is mowed unevenly. In this case, the device may vibrate or stop abruptly.

For the device to work properly, it is recommended to file the knives (30 ° angle). Otherwise, an abrasive tape is used. The gap should be between the 2 blades, touching the strip. The device is switched on periodically (15 seconds each). If the knives are sharp, then the strip is removed, the gap is adjusted.

If the blades are in the wrong position, the cylindrical lawnmower makes sudden and uncontrollable movements. Normally, the gap between the cutting elements should be thinner than a sheet of paper. Otherwise, the clearance is adjusted. It is preliminarily recommended to study the instruction manual of the device, to remove the plug from the socket. When the connection is loose, a whistle appears. The device vibrates and rattles. Repairing a lawn mower means adjusting the bolt connections.

If the belt breaks or stretches, then it must be replaced. This requires loosening the screws. Then the pulley moves, the belt is dismantled.The new part is slipped onto the small pulley and then onto the large pulley. The gear returns to its original position. The next step is to check the tension of the new belt. The deflection should not exceed 4 mm.

The reasons for the unexpected shutdown of the electric lawnmower are associated with a broken cord or a lack of current. In the first case, it is recommended to check the cable for breakage. To replace the power cord, you will need to unplug the power plug and open and remove the switch cover.

Before unscrewing the cable retainer? it is necessary to remember the diagram of its connection to the switch. To disconnect the cord, use a hexagon socket (1 mm diameter). The clamp is released, the conductors are dismantled. A multimeter is used to check the cable for breakage. A new cord is installed if necessary. In this case, the reverse sequence is observed.

In the second case, it is recommended to connect another device to the mains. Electrical devices may not work if the fuse in the plug is damaged. To carry out repair work, you will need to disassemble the plug. For this, a screwdriver and a tester are used.

Motor problems occur when the mower overheats:

as a result of long-term work;
overload (the cutting element is blocked by an object).

In the first case, it is recommended to wait a few minutes for the motor to cool down. In the second case, you will need to remove the stuck object. The efficiency of the cooling system depends on the condition of the air filter. A dirty device does not allow air to pass through well, which contributes to the shutdown of the device. Experts advise to clean and change the filter every 3 months (with constant use of the lawn mower). When the electric motor breaks down, there is a corresponding smell and noise. In this case, the drive will need to be replaced.

The design of a gasoline lawn mower, in contrast to an electric analogue, is more complicated. In some cases, the unit cannot be repaired. If the engine does not start or stops immediately, then it is recommended to check the ignition. To do this, you need to dismantle the candle. A dry plug indicates a problem in the feed system, and a wet plug indicates a carburetor. In such cases, repair work is carried out by professionals.

If the candle has black carbon deposits, then it is replaced. This does not take into account the reason for the breakdown of the lawn mower (carburetor setting, low-quality fuel). Often on petrol models, the fuel hose becomes clogged. If gasoline does not flow, then the saloon is cleaned with a needle, and the fuel filter is replaced with a new analogue.

If the mower does not cut the grass, then check the blades. If necessary, they are replaced with new cutting elements or sharpened on emery. In the second case, it is recommended to use protective goggles and thick gloves. You can sharpen the mower blades using the special tools included with the device.

If the blades are blocked by long grass, then it is advisable to turn off the mower. The cylinder is scrolled with a wooden stick (in the other direction) until it rotates freely. If the mower does not work as a result of a faulty switch, then it is recommended to check it and replace it with a working analog.

In the absence of voltage in the outlet, the shield is checked. Some devices are equipped with thermal protectors. When such a system is triggered, the ventilation grilles are checked for contamination. A soft brush is used to clean them.Repair of mechanical mowers is carried out when the cutting elements are blunt or damaged. In this case, experts recommend dismantling the removable knives yourself. Emery is used to sharpen them. The battery is replaced if necessary in rechargeable models.Before repairing the mower, the type of motor is determined:

Electric - the motor is powered by current. The unit shuts down due to overheating or overload. Some models do not have overheating protection.In case of mechanical damage to the engine, professional assistance will be required.

Gasoline - the device fails as a result of overheating, overload, breakdown of the oil and fuel supply circuit. Gasoline lawn mowers, unlike electric models, take longer to repair.

TOREX combination reversible screwdriver with bits

We inspect the gaskets for breaks or burnout. If this is found, then it is necessary to ensure the tightness of the structure by replacing them with new ones. The air damper can contain carbon deposits that reduce the quality of the air / fuel mixture. You need to get rid of it by cleaning the carburetor by washing the unit in a solvent or kerosene.

Choking during operation or the lack of a set of them to enter the operating mode together with overheating of the power unit are the reasons for such events:

Violation of idle speed adjustment. You can unscrew the jets to the correct position using a screwdriver yourself. It will be possible to do this even by ear, so that the motor runs smoothly. The knives do not need to be removed, but they should not rotate.
The air filter is dirty. It is enough to remove it outside and clean, rinse. We dry naturally in the wind, without placing it near the stove or fireplace.

Use a flat screwdriver to remove the air filter cover

After removing the cover, also carefully remove the air hose

Remove the carburetor fuel chamber cover and clean it. For this, an ordinary vadashka is quite suitable, but you can also buy a special liquid.

To clean the fuel chamber, first wipe it with WD-40, then soak it for 15-20 minutes, wipe it again. This should be repeated 3-4 times to completely clean the chamber and channels.

After purging, the carburetor is assembled and returned to its place.

A clogged exhaust will result in a restriction of the exhaust flow from the exhaust pipe. Resins appear on the inner surface due to an incorrect ratio in the mixture of fuel and oil. We twist the crankshaft so that the piston goes up to the maximum and clean its surface with a wooden stick.

In more serious cases, it is recommended to contact the service under warranty. Otherwise, non-professionalism will bring more breakdowns. Moreover, if you independently search for faults and repairs during the warranty period, the warranty will expire.

VIDEO: Instructions for disassembling and cleaning the carburetor using the example of BRIGGS & STRATTON

08/22/2016 15:34 2016-08-22T12: 34: 13.000ZThe Bosch Rotak 40 electric lawn mower has been used in our family for more than 7 years and during this time there have not yet been any breakdowns.Our plot is 4 acres, of which 2 acres of lawn with trees are mowed in 1.5 - 2 hours. We mow at a knife height of 2.5 centimeters from the ground about once every 2 weeks, we do not wait until the grass becomes very tall or dry.The lawn mower weighs 13 kilograms, and even more with grass. The knife is reliable and durable, allows you to chop small branches or apples, so be careful. The collector lasts 15-20 minutes, depending on the height of the grass.You can mow on slopes, just need to get used to it. When you throw away the grass, you have to help with your hand. It is better to do this with gloves, because the juice eats into the skin and is then washed off only with foam.Our lawn mower is quite noisy, its power is 1700 watts, but now it is being sold for 1600 watts. There is child protection - to start, you need to hold down the middle button and then press another one on the handle. Then you can hold one of the four buttons - thus it is easy to change hands.Do not forget to clean the mower around the knives after work. When this grass dries up with the earth, you will have to beat off with something.

”> The ROTEK 34 mower has worked well for three seasons. It's time to do some preventive maintenance. Image - Rotak 40 DIY repair

Shaft wear under the lower bearing 0.08 mm

and had to replace the upper bearing. The upper bearing is poured into the support housing.

I had to deal with modernization. In general, I am satisfied with the mower.

What area do you mow, how often? The relief, the height of the grass?
Is the wire getting in the way?

The wire does not bother me. I turn on the mower through a stabilizer for 3 kilowatts. The area is 3-4 acres. The grass goes to organic farming. The in-law bought this, but the knives are 40 cm. He has an area of 8-9 acres. He did not make a lawn. The height of the grass sometimes happens 40 cm I mow at a height of 5-6 cm The process resembles cleaning an apartment with a vacuum cleaner. I mow often.

On 3-4 ares, IMHO, quite.

I have Bosh Rotak 34 years 7-8. It plows like a beast especially last season, the mows were 8 hectares at a time, but half a day and even more went away with smoke breaks. I think I'll use it until it breaks, then I'll just buy a new one. A good reliable mower, and even very light.

Any technique requires preventive repairs and inspections!

repair shop Correct in principle. But it seems that in 7 years the mower paid for itself completely and repairs are most likely not advisable. And he doesn't seem to be asking for porridge yet.
And besides, this is no longer a repair, but an artisanal modernization when “the upper bearing is poured into the support housing”. Those. it looks like the product is not designed for repairs of this level, but simply, having developed a resource, it goes to waste.

How many times have you changed the brushes on the motor?

repair shop Not once!
“Thoughtful,” but you probably need to check.

In well-thought-out engines, when fully worked out, the brush freezes and the engine stops; in others, a spring and a kerdyk collector are used.

Smart brush.A joke in one word, I heard about such, but today I polished the angle grinder in it with a slight click and turned off, when I disassembled it, I saw that the brush itself asked for a replacement.

THOSE. in it there is a spring with a small dielectric support, when the brush is erased to this level, repulsion and shutdown occurs.

Cool, respect to the creators.

I would like to know the name of the manufacturer of this instrument.

Any equipment must be serviced on time and then it will work for a long time and without problems.
I looked when the bearing of the main shaft, which stands at the bottom, began to wedge. Then it began to scroll and, as a result, the seat fell into disrepair. A special bushing was made and glued into place on liquid metal. Neighbor Rotek has 32, but the same story. So watch out for the bottom bearing

Later I will post pictures of how it looks.

No matter how hard I tried, I could not pull the pulley off the electric engine. I had to “release” it a little with a grinder.
To my delight, there was an opportunity to buy spare parts for this mower. For example, a pulley costs around 400 rubles, a belt 450.
[

Here you can still read and see about the repair ”>

On Avito, there are more and more advertisements for the sale of broken ROTAK mowers. And many have one problem - the engine burned out. Realizing that there is nothing eternal, I attended to the selection of an analogue. Mine has already served faithfully for the fourth year. In fact, it is easier to buy a new mower with a similar drive than buying a new motor for Bosch. Searches led to the VITYAZ GKE-1600 GASON MOWER.
Well, of course, comparison and first acquaintance.

Comparison of two receiving bunkers for grass. The knight, oddly enough, enters a little less, although it seems that much does not fit into a rag bunker.

The winding of the engine manifold is well impregnated with varnish and inspires confidence. Another question was raised - too large holes for the passage of cooling air to the engine. In Rotak 34, all the air flow is directed to the brush assembly and this is correct, as it seems to me.

And how did the vivisection end?

n-p-n wrote:
And how did the vivisection end?

She successfully passed the test and joined her brethren.
From remarks:
The brush assembly does not provide for the brushes to hang at extreme exhaustion, as is done on the Boch.
Therefore, periodically you need to look at the length of the brushes, otherwise the graphite will run out and the spring will reach the collector.
In the photo, how this problem is solved on Rotak 34 /

I don’t know if it is possible to consider the absence of a transverse crosspiece as a minus, for which it is convenient to lift the mower and get rid of tall nettles and burdocks.
Knowing that everything flows quickly in this world, I decided to buy a spare gear and a knife.

Bosch Lawn Mower Rotak 32: models, features of work, repair

Suburban homeowners who have a beautiful lawn that is a stunning façade to create the look of their entire home should definitely have a modern lawnmower at their fingertips. It is needed so that the territory of the site is well-groomed, and the careful appearance of the site pleasantly amuses the eyes of the owners and guests.

Thus, the conclusion is imposed on its own: accuracy is required in the haircut, which can only be achieved with the help of special devices. Today the number of lawn mower manufacturers is off the charts, but only exceptional brands can guarantee the highest quality! It can be used by the Bosch company, whose ideological inspirer and creator is Robert Bosch.

The company is one of the long-livers, the creation of which dates back to the 19th century. In addition, the entire policy of the company was formed in this gap: “the waste of funds is nothing compared to the waste of trust. Promises are always more important than immediate benefits. "And now, almost two centuries later, the company continues to keep its promises in order to maintain its guaranteed reliability, satisfying customer needs.