Juicer zhuravinka DIY repair

In detail: juicer Zhuravinka DIY repair from a real master for the site my.housecope.com.

Juicer repair: how to disassemble with your own hands, instructions for Bosch 700 w, Zhuravinka and Moulinex, Autumn and Scarlet

A juicer is a must-have equipment for all lovers of fresh juices. Autumn is harvest time. Fresh apples in the gardens of summer residents are pleasing to the eye. At first, it’s not clear how to deal with such volumes. Juicers come to the rescue. But, like any technique, sooner or later they break down. To make your life easier, you can repair a broken apparatus. Today there are many types of juicers, such as: Bosch (Bosch), Moulinex (Moulinex), Scarllet (Scarlet), Philips (Philips), SVA, Zhuravinka, Cameron (Cameron), First Austria (First Austria). The good news is that on the Internet you can find various videos on the topic of repairing juicers with your own hands.

Each juicer comes with instructions and an assembly diagram. But if you have been using the device for several years, the instructions could be lost. Even in this case, it will not be difficult to disassemble the device.

Having carried out repairs with your own hands, difficulties can arise only during the first disassembly.

The main thing is not to overdo it with efforts when disassembling. Otherwise, there is a risk of damage to the juicer body.

The juicer can be disassembled in several steps.

Make sure the power cord is unplugged.
We remove the product pusher from the loading compartment.
Remove the cover, having previously disconnected the mount.
Further, from under the lid, we take out the container that accumulates the already squeezed products.
We take out the chopper.
Disconnect the juice jug.

Video (click to play).

After disassembling the juicer body, then you need to remove the pulley. Usually, it is twisted off the shaft in the opposite direction from the working rotation.

To get to the bottom juicer motor, you need to:

Unscrew the screws securing the protective cover.
Remove engine guard, if fitted.
Remove the motor mount and remove it from the juicer housing.

There is an exception for auger juicers, which are similar in design to a meat grinder.

To disassemble them you need:

Remove the attachment.
Detach the receiving device with auger from the main body.
Remove the auger itself.
The engine itself can also be reached from below.

A breakdown of the juicer can be caused by both natural wear of materials and engine damage.

Remember that before disassembling the appliance, you should not just set the switch (lever) on the case to the Off position, but also completely disconnect the power cord from the power outlet.

The juicer motor can fail for several reasons:

Power supply voltage drops.
Due to prolonged operation and excessive stress on the juicer.
Due to liquid entering the juicer body.

If you do not have enough experience in repairing, it is better to seek help from a specialist.

Engine problems can be reported by:

Sparking and heating. This is the result of the abrasion of the brushes from the collector motors. The problem is solved by replacement.
The rotation of the armature shaft is impeded. The bearings should probably be replaced as they may have failed or become dirty. To prevent such damage, the juicer should be cleaned and the motor lubricated in good time.
If you smell burning and blackening is visible, the winding is most likely burnt out. This problem can be solved only by replacing the engine.

These are the main problems with juicers. And only one of them is serious.The first two can be solved quickly enough.

It would seem that everything has already been considered. How to disassemble the juicer is clear. What is the peculiarity of the Zhuravinka juicer? The peculiarity is that when you get to the engine compartment, you will not see any more mounts that would allow you to access the engine compartment.

Don't worry about this. All compartments are very tightly covered with a plastic disc, to which a grater-shredder was attached. It takes a lot of effort to remove it.

Independent repair of all types of juicers, including "Zhuravinka", is reduced to replacing broken parts, such as: wires, switch, bearings or electrical plug

To remove it, it is desirable:

Place the juicer on the floor and, holding it with your feet, pull the disc towards you.
If possible, you can ask someone to hold the case and carefully remove the disc yourself.

It is important to keep track of the effort you make so you don't break anything.

After removing the disc, four screws will be available to you, removing which you can get the engine and eliminate the cause of the breakdown. The Zhuravinka juicer is assembled tightly and quite simply. Unlike the First Austria juicer, which, according to numerous reviews, causes difficulties in disassembly, in disassembling the Zhuravinka juicer, additional efforts require only a disk that closes access to the engine.

Currently, Bosch juicers (bosch) with a capacity of 380w and 700w are gaining popularity on the market.

Assembling a Bosch juicer (bosch):

Bosch products continue to be associated with build quality, functionality and reliability

Insert the cake container into the engine block.
First insert the strainer insert with the spout into the hole in the motor block.
Now you need to insert the strainer. Check it for damage.
Next, you should install the cover, and press it so that it snaps into place. The switch must be in the Off position.
To trap the resulting foam, place a juice container with a large opening under the juicer drain.

To get juice, you need:

Place the juicer on a clean and smooth surface. Turn it on.
While the engine is running, put vegetables and fruits in the loading barrel. Use the pusher pushing down as gently as possible to avoid stress on the juicer motor.
Turn off the juicer only after all the juice has drained off.

Wait until the motor has come to a complete stop before opening the juicer. To open the lid of the juicer, you must first move the switch to the "open" position.

The pomace container must be emptied before the pomace rises to the top of the container, which should be grasped with your hands to remove it.

It is recommended to clean the strainer if:

The engine speed decreases.
The resulting juice became thicker.
The juicer vibrates significantly.

It is recommended to clean the cake container and strainer at the same time.

Whether it's spring, summer, autumn or winter, the body will always need juice. And it doesn't matter what kind of juicer you have: Bosch or Scarlett, Philips or Moulinex, the main thing is to understand the basic principles of assembly / disassembly of this device. So that, if necessary, replace the failed element. Let your juicer serve you long and productive. Make yourself and your loved ones happy every day.

Video uploaded by Irina Faneeva
Search for Irina Faneeva 4 months ago

Most household auger juicers have a big drawback, which is that if, for some reason, the outlet is clogged, this can lead to damage to the juicer.

👉Video about what the addition of Citric acid and a substance containing Chlorine leads to. For silumin elements of the washing machine - this is fatal! Also, such damage is influenced by such factors as: 1. Electrochemical corrosion.(lack of grounding) 2. Composition of water. 3. The composition of the powder. 4. Water level during washing. 5. Chlorine-containing substances (bleaching agents) 6. Composition of the crosspiece itself. 7. Calgon and other additives and additives for washing. Why old washing machines wash better than new ones:

Packer dispenser packer of seeds with a volumetric dispenser, cost 1100 USD, can be collapsible and shipped worldwide. Contacts for orders: +38 050 4571330

Juicer for apples Zhuravinka SVSP-303 was purchased for processing a large number of apples. This kind of household appliances had never been used before, and this is what happened in the end. The composition "Daily Beetle" belongs to the artist Kevin MacLeod. License: Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/). Original version: Artist:

What can be done from a juicer motor ?! A machine for a home craftsman homemade. How to connect an engine. An eager-grinder-grinder at home from scrap materials. Subscribe to my channel. It will be more interesting further! Making Machine How to make How to make a milling unit wood processing

As you may have guessed, we are not talking about the obvious things described in the instructions. Disassembly is of interest to us solely for the purpose of repair or cleaning, if the device suddenly starts to junk. We will learn how to disassemble the centrifugal juicer "Zhuravinka" at home.

No matter how reliable a thing is, over time it can fail. This can be caused by overloads during operation, dirt, leaks of various liquids on electrical parts, which can lead to short circuits and breakdowns.

To carry out repairs, we need to get to the compartment with the electric motor, which is located at the bottom of the Zhuravinka juicer, so you need to start disassembling it from above (more about the internal structure - the device and the principle of operation of a modern juicer). But even after removing from it all the removable parts involved in grinding vegetables, you will not see any more latches or fasteners that allow you to disassemble the engine compartment.

However, this is only an appearance: in fact, there are no special difficulties here. All cover fixing screws are hidden under the plastic disc, to which a metal grater was screwed for chopping food. It just "sits" very tightly on the motor shaft and it takes a lot of effort to remove it.

To do this, put the juicer on the floor and hold it with your feet or with assistance, carefully pull the plastic disc off the shaft with your hands, trying to avoid large bends. It may not work the first time, but attempts should be continued. The main thing is not to overdo it and not break anything.

Under the disc, you will find four screws, by unscrewing which, you will divide the juicer body into two parts and gain access to all its insides and, possibly, guess the cause of the malfunction.

Knowing the internals can come in handy when creating a homemade juicer.

Self-repair of all types of juicers, including "Zhuravinka", is reduced to replacing broken parts, such as: wires, switch, bearings or electrical plug. But more often than not, you just need to clean the engine compartment (and the motor itself) from debris that has got into it during operation: dust, juice, cake, etc. It may also require lubrication of moving parts.

But if the winding of the electric motor has burned out and it does not work if there is voltage at the terminals (this can be found out using an electrical tester), then you cannot do without the help of a specialist.

Rewinding a winding requires not only knowledge of electromechanics, but also the availability of special tools and consumables.

The Belarusian-made Zhuravinka juicer is as reliable as it is ancient.It does not have any complex control microcircuits that could burn out from a second voltage drop in the network. So it is quite possible to fix it and on their own... For her, even the combustion of an electric motor is not critical, since it is maintainable, unlike modern models of juicers.

Fans of freshly squeezed juice and happy owners of devices for its extraction inevitably face the problem of how to disassemble their favorite juicer without fatal consequences for its functionality. There are many such household appliances on the market under different brands.They can be made in four versions:

centrifugal type,

with auger wringing,

combined,

machines for citrus fruits.

Regardless of the model, device, brand and quality of workmanship, they all require regular maintenance. During the squeezing process, cake accumulates inside the machine, juice residues, which must be removed after each use. Delaying with this can adversely affect the functionality of the device, lead to its premature inoperability. Despite the reliability of the design, most branded devices may fail. Depending on the nature of the breakdown, repairs can be difficult, which will require special knowledge and the participation of an expert, or simple. In the latter case, you can do it on your own, for which you will need to dismantle the structural elements of the juicer.To disassemble / assemble the device, you must have at least a general idea of its design. Devices for squeezing can have different designs and design features. But in general terms, their structure is about the same. Each juicer is equipped with:

housing for mounting structural elements;

metal (less often plastic) basket with a grater, where the product is chopped;

capacity for the accumulation of cake;

removable reservoir for collecting juice;

lid with a hopper for loading vegetables or fruits;

pusher;

motor unit with power cable;

control unit with switch.

I replied to the manufacturer that I considered the situation a hoax. There was no reaction to this. Probably, “Mogilev Electrodvigatel Plant” made some gesture in my direction, but I can't see it from here.

Here is the Instruction from the Zhuravinka juicer, still Soviet.

The problem of abrasion of plastic and aluminum in food has been passed over in silence.

The juicer of Belarusian production Zhuravinka, like other electric juicers, is a universal device capable of squeezing juice from any vegetable and fruit products in a very short time. Moreover, the hardness of the product can be different. In addition, some models are equipped with a removable shredder, expanding the capabilities of this remarkable device.

Practicality, reliability and high performance have made this device indispensable for the mass processing of gifts from gardens and vegetable gardens. High quality and low cost determined the popularity of the device among the population.

Many gardeners do not know where to buy a Zhuravinka juicer. In stores, there is practically no manual auger juicer, so the most realistic option is to purchase it via the Internet.

Juicers of the Belarusian production Zhuravinka have excellent characteristics, which distinguishes them favorably from their foreign counterparts:

Manufacturer - plant "Electrodvigatel", the city of Mogilev.
The spin type is centrifugal. The crushed products under the action of centrifugal acceleration are thrown onto the grid, where the juice is squeezed out.
Power - 120 W like a Scarlet juicer.
Dimensions: 31 x 26 x 21 cm.
Power supply - 220 V like a garden juicer Belarus.
Case material - shockproof plastic.
Time of continuous work - 1 hour. After this time, the device must be turned off and cooled. This is a significant plus that distinguishes the Zhuravinka juicer. Belarus produces reliable electrical appliances capable of long-term operation.
The purity of the finished juice is 92% like that of a Philips juicer.
Productivity - 25 kg for 1 hour of work or 400 g of juice per minute.
Weight - 5 kg.
The number of spin speeds - 1.

Additionally, you can indicate that the price of a Zhuravinka juicer largely depends on the country in which you buy it. On average, its cost is about $ 50-60. A meat grinder with a juicer costs the same.
to the menu ↑

Before buying a Belarusian juicer Zhuravinka, it is useful to familiarize yourself with its device and equipment, since some models are equipped with such additions as a shredder and automatic discharge of cake.

The Belarusian juicer consists of the following main parts:

Plastic case.
Power cord.
Engine.
Metal disc.
A sieve filter similar to a universal juicer.
Lid.
Clips holding the cover against the body.
Tray.
Plastic pusher.
Pulp container with a capacity of 1 liter.
Juice container with a capacity of 0.5 liters.

The Zhuravinka juicer with shredder is additionally equipped with discs for fine and coarse shredding. When buying, pay attention to the availability of a shredder, if you need it.

Juicer Zhuravinka is universal. This means that it can be used to process any vegetable or fruit product. Fruits or berries inside the device are crushed to a mushy state using a disc grater. Further, the juice is separated from this mixture in a centrifuge, like in an apple juicer.

As a result of squeezing, a lot of pulp is obtained, which is dumped into a separate container. Thanks to this versatility, it is possible to get by with one unit for all juice applications. You don't need a separate tomato juicer. Zhuravinka will do an excellent job of getting tomato juice.
to the menu ↑

There are various models of Zhuravinka juicer, each of which differs from other varieties very slightly. Most models do not have an automatic cake discharge. This allows you to squeeze the juice as efficiently as possible.

However, there is also a minus in this. If the sieve becomes clogged, you have to disassemble the device and clean the sieve. Some Zhuravinka models are equipped with a device for automatic waste disposal. They are perfect for those who do not like breaks in the process of work.

Juicer Zhuravinka SVSP 301 is not equipped with shredding discs and is intended only for squeezing out juice. This also affects its cost. If you only need a unit for juice, then there is no need to overpay for a shredder.

The Zhuravinka 301 m juicer differs in the same configuration. But the SVSP-301P juicer-press model has a high power - 160 W. Zhuravinka SVSP-303 also does not have a shredder, but its power is already 350 watts.

The Juravinka 102 juicer with a shredder differs from its counterparts by the presence of a shredder.
to the menu ↑

We invite you to read the reviews about the Zhuravinka juicer left by the buyers of this device.

“Overall, I am satisfied with the purchase.

Advantages: it works for a very long time without interruption, squeezes the pulp with high quality.

Disadvantages: the juice is not very clear. The pulp glass is not attached to the body and sometimes slides off to the side. The design of the case gives the impression of a piece hewn with an ax. "

“I have a juicer Zhuravinka 301. I am very satisfied.

Advantages: strong body, simple device, manual pulp discharge, high performance.

Disadvantages: there is no fuse against being disassembled, the shredder cuts the vegetables too finely. "

“Advantages: I liked the durability and the fact that it does not get warm at all even with prolonged use. The spin speed is amazing. Buying a Zhuravinka juicer will be beneficial even for those who process hundreds of kilograms of fruit annually. No foreign model can cope with such volumes.

Disadvantages: noise, vibration during the accumulation of cake. The plastic is colored with carrot juice. It is necessary to wash the juicer immediately after use.

Conclusion: for that kind of money - a great model. "

If you are interested in this type of kitchen equipment, then you can get information on where to buy a Zhuravinka juicer, its cost in a particular region and configuration from the Internet.

Video (click to play).

Today, buying Belarusian Zhuravinka juicers means providing yourself with reliable and productive equipment for many years. Practice shows that juicers of this manufacturer can work flawlessly for up to 20 years.